Chapters authored
Enhanced Humidity Sensing Response in Eu3+-Doped Iron-Rich CuFe2O4: A Detailed Study of Structural, Microstructural, Sensing, and Dielectric Properties
The CuFe(2−x)EuxO4 (where x = 0.00, 0.01, 0.02, 0.03) nanoparticles are synthesized by solution combustion method. The influence of Eu3+ on the structural, morphological, dielectrical, and humidity sensing study is recorded. The XRD pattern peaks of the as-prepared CuFe(2−x)EuxO4 (where x = 0.00, 0.01, 0.02, 0.03) nanoparticle confirm the polycrystalline spinel cubic structure with a small amount of CuO impurity phase at 38.87° and 48.96°. Surface morphology of the samples was studied by scanning electron microscope (SEM) images of the nanoparticles, and their respective average grain size was estimated using Image software. Chemical composition of all prepared samples was analyzed by EDS spectra. The dielectric parameters of AC conductivity, electric modulus, and impedance of the samples were measured over a range of frequencies from 0.1 KHz to 1 MHz at room temperature. Europium-doped copper ferrite samples showed good humidity sensing response, response and recover times, and stability over a %RH range of 11–91%. These types of samples are very useful for sensor application, battery applications, electronic applications, and automotive applications.
Part of the book: Mineralogy