Chapters authored
The Influence of Interfacial Transition Zone on Strength of Alkali-Activated Concrete
A process of structure formation taking place in the interfacial transition zone (ITZ) “cement stone-aggregate” was studied on a variety of concretes made with artificial and real aggregates. The study of these processes in the case of artificial aggregate prepared from a mixture of clay loam and alkali-activated slag cement showed that not only active SiO2 and Na2O but also other substances of both cement and aggregate are involved in the formation of the ITZ. This results in the formation of alkaline and alkaline-alkali-earth aluminosilicate hydrates which strengthen the ITZ and improve strength and durability of the concrete. Thus, the alkali-silica reaction (ASR) transforms from a destructive one (negative effect) into a constructive one (positive effect). The study on the ITZ in the alkali-activated cement concretes made with real alkali-susceptible aggregates selected from crushed basalt rock, glassy waste product from basalt fiber production, crushed perlite rock, and expanded perlite suggested to make a conclusion on the possibility to prevent the destructive processes in the ITZ through the addition of the metakaolin additive into the cement composition in quantities of 5–10% by mass. These conclusions were supported by the long-term testing of strength of these concretes, by measuring the deformations “shrinkage-expansion” as well as the results of study on hardness of the ITZ.
Part of the book: Compressive Strength of Concrete