The production of geometrically and dimensionally defined workpieces is what the user expects from a machine tool. Deviations from these prescribed dimensions and geometry are due to machine inaccuracies. Therefore, it was necessary to develop tests and tests on the properties and parameters of machine tools that can detect these. Every new machine tool undergoes these tests.How to perform and evaluate these tests is determined and recommended primarily by standards and regulations. When testing the properties of machines, it is not only about knowing and knowing how to measure machines, but also how I can analyze and apply the obtained results. Is it necessary to do a mechanical intervention of the machine or is it enough to compensate the software?
Part of the book: Machine Tools