Chapters authored
Aircraft Gas-Turbine Engine’s Control Based on the Fuel Injection Control
Part of the book: Aeronautics and Astronautics
Aircraft Gas-Turbine Engine with Coolant Injection for Effective Thrust Augmentation as Controlled Object
This chapter deals with some intensive methods regarding aircraft gas-turbine-engine performance enhancement, which are suitable alternatives for the most common temporarily thrust increasing method—the afterburning. Coolant injection method, into the compressor or into the combustor, realizes the desired thrust increase for a short period, when the flight conditions or other aircraft necessities require this. Both methods were studied from aircraft engine’s point of view, considering it as controlled object. New engine’s mathematical model was built up, following the thermo- and gas-dynamics changes and some quality studies were performed, based on engine’s time behavior simulations; some control options and schemes were also studied. Quantitative studies were based on the model of an existing turbo-engine; mathematical model’s coefficients are both experimentally determined (in the Aerospace Engineering Division labs) as well as estimated based on graphic-analytic methods. This approach and the presented methods could be applied to any other turbo-jet engine and used even in the stage of pre-design of a new engine, to estimate its stability and quality.
Part of the book: Aircraft Technology