Chapters authored
Engineering Geology and Tunnels
Currently, knowledge and understanding of the role of geological material and its implication in tunnel design is reinforced with advances in site investigation methods, the development of geotechnical classification systems and the consequent quantification of rock masses. However, the contribution of engineering geological information in tunnelling cannot be simply presented solely by a rock mass classification value. What is presented in this chapter is that the first step is not to start performing numerous calculations but to define the potential failure mechanisms. After defining the failure mechanism that is most critical, selection of the suitable design parameters is undertaken. This is then followed by the analysis and performance of the temporary support system based on a more realistic model. The specific failure mechanism is controlled and contained by the support system. A tunnel engineer must early assess all the critical engineering geological characteristics of the rock mass and the relevant mode of failure, for the specific factors of influence, and then decide either he or she will rely on a rock mass classification value to characterise all the site-specific conditions. Experiences from the tunnel behaviour of rock masses in different geological environments in Alpine mountain ridges are presented in this chapter.
Part of the book: Tunnel Engineering