Chapters authored
Development of the Conical Spouted Bed Technology for Biomass and Waste Plastic Gasification
Gasification is one of the most effective methods for upgrading different wastes, such as plastics and biomass, because the gas produced can be used directly as a fuel or as a renewable raw material for the production of chemicals and fuels. The conical spouted bed reactor (CSBR) has demonstrated to perform well in gasification process due to its specific features, such as (i) the cyclic and vigorous particle movement that avoids bed defluidization (a limitation in fluidized beds), (ii) capability for handling irregular or sticky solids, (iii) high heat transfer rates between phases, and (iv) bed stability in a wide range of gas flow rates. However, the conventional CSBR is characterized by its short residence time, which involves serious problems for minimizing tar formation. The incorporation of a fountain confiner in the CSBR is key to increasing the gas residence time and improving the contact between the gas and heat carrier particles, thereby promoting tar cracking reactions and so enhancing carbon conversion efficiency from 81.5% (without confiner) to 86.1% under fountain enhanced regime. The quality of the syngas is clearly improved as the H2 concentration increases from 36 to 42% with and without the fountain confiner, whereas that of CO decreases from 34 to 29%, respectively.
Part of the book: Sustainable Alternative Syngas Fuel