Chapters authored
Waste Plastics Valorization by Fast Pyrolysis and in Line Catalytic Steam Reforming for Hydrogen Production
This chapter summarizes the most recent results obtained in the plastic waste pyrolysis-reforming strategy for hydrogen production. An original two-reactor configuration consisting of a conical spouted bed reactor for the pyrolysis step and a fluidized bed reactor for the pyrolysis volatile reforming is proposed. The fundamental aspects and challenges of this joint process are discussed in detail, and the prospects for the full-scale implementation of this valorization route are assessed. Thus, the influence the main reforming parameters (temperature, space time and steam/plastic ratio) have in the pyrolysis-reforming of HDPE on product yields and catalyst stability are reported. Moreover, the role played by plastic composition on process performance is also described by studying the influence of following polymers: high density polyethylene (HDPE), polypropylene (PP), polyethylene terephthalate (PET) and polystyrene (PS). The operating conditions used for the valorization of different plastics have been as follows: pyrolysis temperature of 500°C, reforming temperature of 700°C, space time of 16.7 gcatalyst min gplastic−1and steam/plastic ratio of 4.
Part of the book: Recent Advances in Pyrolysis