Karthikeyan Krishnamoorthy

By Jeyasubramanian Kadarkaraithangam, Thangaiyanadar Suyambulingam Gokul Raja, Silambuselvan Parani Bramma Nayagi and Karthikeyan Krishnamoorthy

This chapter describes the results of developing superhydrophobic coatings using porous ZnO nanostructures impregnated metal stearates and their applications. The porous ZnO nanostructures with a surface area of 9.7 m2/g and pores in the range from 200 to 400 nm have been prepared via precipitation cum calcination route. The superhydrophobic coatings comprising ZnO/metal stearate film have been deposited using a spray coating method. The developed superhydrophobic films possess a water contact angle of 161° that can be explained using the Cassie-Baxter model. The prepared films exhibited excellent floating properties and high load-bearing characteristics over a prolonged time. Additionally, the self-cleaning properties of the developed superhydrophobic films towards dust removal and self-cleaning urinary coatings are also demonstrated. This chapter collectively presented the novel applications of superhydrophobic coating in the development of biomedical coatings and applications in water surveillance and underwater robotics.

Part of the book: Novel Nanomaterials

By Karthikeyan Krishnamoorthy and Sang-Jae Kim

This chapter describes the use of Raman spectroscopy and mapping analysis for the characterization of low dimensional nanostructures, including 2D sheets (graphene oxide, graphene sheets, MoS2, siloxene), and one-dimensional carbyne chains. The Raman mapping analysis and their application towards understanding the molecular level interactions in these low dimensional materials, nanostructured polymer composites, and nanopaints are also discussed. The stoichiometric composition and structure of these low dimensional materials were correlated with the Raman spectral and mapping analysis. Further, Raman spectroscopy for understanding or probing the mechanism of mechanical to electrical energy harvesting properties of carbyne films via the structural transformation from cumulene to polynne networks of carbyne is demonstrated.

Part of the book: Recent Developments in Atomic Force Microscopy and Raman Spectroscopy for Materials Characterization

By Parthiban Pazhamalai, Karthikeyan Krishnamoorthy and Sang-Jae Kim

This book chapter discusses the topochemical synthesis of blue titanium oxide (b-TiO2) and their application as electrode material for supercapacitor devices in aqueous and organic electrolytes. The formation mechanism of b-TiO2 via topochemical synthesis and their characterization using X-ray diffraction, UV–visible, photoluminescence, electron spin resonance spectroscopy, laser Raman spectrum, X-ray photoelectron spectroscopy, and morphological studies (FESEM and HR-TEM) are discussed in detail. The supercapacitive properties of b-TiO2 electrode were studied using both aqueous (Na2SO4) and organic (TEABF4) electrolytes. The b-TiO2 based symmetric-type supercapacitor (SC) device using TEABF4 works over a wide voltage window (3 V) and delivered a high specific capacitance (3.58 mF cm−2), possess high energy density (3.22 μWh cm−2) and power density (8.06 mW cm−2) with excellent cyclic stability over 10,000 cycles. Collectively, this chapter highlighted the use of b-TiO2 sheets as an advanced electrode for 3.0 V supercapacitors.

Part of the book: 21st Century Nanostructured Materials