Recently, metasurfaces (MSs) have continuously drawn significant attentions in the area of enhancing the performances of the conventional antennas. Thereinto, focusing MSs with hyperbolic phase distributions can be used for designing high-gain antennas. In this chapter, we first design a new reflected MS and use a spiral antenna as the feeding source to achieve a wideband high-gain antenna. On this basis, we propose a bi-layer reflected MS to simultaneously enhance the gain and transform the linear polarization to circular polarization of the Vivaldi antenna. Then, we proposed a multilayer transmitted MS and use it to enhance the gain of a patch antenna. This kind of high-gain antenna eliminates the feed-block effect of the reflected ones but suffer from multilayer fabrication. To conquer this problem, we finally propose a single-layer transmitted focusing MS by grouping two different kinds of elements and use it to successfully design a low-profile high-gain antenna.
Part of the book: Metamaterials and Metasurfaces
Recently, metasurfaces (MSs) have received tremendous attention because their electromagnetic properties can be controlled at will. Generally, metasurface with hyperbolic phase distributions, namely, focusing metasurface, can be used to design high-gain antennas. Besides, metasurface has the ability of controlling the polarization state of electromagnetic wave. In this chapter, we first propose a new ultrathin broadband reflected MS and take it into application for high-gain planar antenna. Then, we propose multilayer multifunctional transmitted MSs to simultaneously enhance the gain and transform the linear polarization to circular polarization of the patch antenna. This kind of high-gain antenna eliminates the feed-block effect of the reflected ones.
Part of the book: Modern Printed-Circuit Antennas
Fabry-Pérot cavity (FPC) antenna is a kind of high-gain antenna. Compared with other high-gain antennas, such as array antenna and reflector antenna, the FPC antenna enjoys the advantages of simple structure and high efficiency. So it has attracts many attention since proposed. However, it also suffers the disadvantages of narrow band and fixed radiation patterns, due to its resonance structure. In order to overcome these disadvantages, we proposed novel strategies to realize reconfigurable FPC antennas using the phase controllable metasurfaces (MSs). Through adding PIN diodes into every unit cell of the MS, the reflection phase of the MS can be controlled by tuning the states of the diodes. Then the designed phase controllable MSs are used as the partially reflection surfaces (PRS) to realize frequency or radiation pattern reconfigurable FPC antennas. In this chapter, we analyze the basic theory of the FPC antenna and describe its radiation principle firstly. Then, reflection phase controllable MSs are designed and applied to the FPC antennas. Thus frequency and radiation pattern reconfigurable FPC antennas are formed. The design processes are described in details, and the proposed antennas are fabricated and measured. The measured results verify the correctness of the designs. Through this chapter, the readers can form a comprehensive understanding of reconfigurable FPC antenna design.
Part of the book: Advanced Radio Frequency Antennas for Modern Communication and Medical Systems