Planned versus actual coverage of the survey.
\\n\\n
Dr. Pletser’s experience includes 30 years of working with the European Space Agency as a Senior Physicist/Engineer and coordinating their parabolic flight campaigns, and he is the Guinness World Record holder for the most number of aircraft flown (12) in parabolas, personally logging more than 7,300 parabolas.
\\n\\nSeeing the 5,000th book published makes us at the same time proud, happy, humble, and grateful. This is a great opportunity to stop and celebrate what we have done so far, but is also an opportunity to engage even more, grow, and succeed. It wouldn't be possible to get here without the synergy of team members’ hard work and authors and editors who devote time and their expertise into Open Access book publishing with us.
\\n\\nOver these years, we have gone from pioneering the scientific Open Access book publishing field to being the world’s largest Open Access book publisher. Nonetheless, our vision has remained the same: to meet the challenges of making relevant knowledge available to the worldwide community under the Open Access model.
\\n\\nWe are excited about the present, and we look forward to sharing many more successes in the future.
\\n\\nThank you all for being part of the journey. 5,000 times thank you!
\\n\\nNow with 5,000 titles available Open Access, which one will you read next?
\\n\\nRead, share and download for free: https://www.intechopen.com/books
\\n\\n\\n\\n
\\n"}]',published:!0,mainMedia:null},components:[{type:"htmlEditorComponent",content:'
Preparation of Space Experiments edited by international leading expert Dr. Vladimir Pletser, Director of Space Training Operations at Blue Abyss is the 5,000th Open Access book published by IntechOpen and our milestone publication!
\n\n"This book presents some of the current trends in space microgravity research. The eleven chapters introduce various facets of space research in physical sciences, human physiology and technology developed using the microgravity environment not only to improve our fundamental understanding in these domains but also to adapt this new knowledge for application on earth." says the editor. Listen what else Dr. Pletser has to say...
\n\n\n\nDr. Pletser’s experience includes 30 years of working with the European Space Agency as a Senior Physicist/Engineer and coordinating their parabolic flight campaigns, and he is the Guinness World Record holder for the most number of aircraft flown (12) in parabolas, personally logging more than 7,300 parabolas.
\n\nSeeing the 5,000th book published makes us at the same time proud, happy, humble, and grateful. This is a great opportunity to stop and celebrate what we have done so far, but is also an opportunity to engage even more, grow, and succeed. It wouldn't be possible to get here without the synergy of team members’ hard work and authors and editors who devote time and their expertise into Open Access book publishing with us.
\n\nOver these years, we have gone from pioneering the scientific Open Access book publishing field to being the world’s largest Open Access book publisher. Nonetheless, our vision has remained the same: to meet the challenges of making relevant knowledge available to the worldwide community under the Open Access model.
\n\nWe are excited about the present, and we look forward to sharing many more successes in the future.
\n\nThank you all for being part of the journey. 5,000 times thank you!
\n\nNow with 5,000 titles available Open Access, which one will you read next?
\n\nRead, share and download for free: https://www.intechopen.com/books
\n\n\n\n
\n'}],latestNews:[{slug:"stanford-university-identifies-top-2-scientists-over-1-000-are-intechopen-authors-and-editors-20210122",title:"Stanford University Identifies Top 2% Scientists, Over 1,000 are IntechOpen Authors and Editors"},{slug:"intechopen-authors-included-in-the-highly-cited-researchers-list-for-2020-20210121",title:"IntechOpen Authors Included in the Highly Cited Researchers List for 2020"},{slug:"intechopen-maintains-position-as-the-world-s-largest-oa-book-publisher-20201218",title:"IntechOpen Maintains Position as the World’s Largest OA Book Publisher"},{slug:"all-intechopen-books-available-on-perlego-20201215",title:"All IntechOpen Books Available on Perlego"},{slug:"oiv-awards-recognizes-intechopen-s-editors-20201127",title:"OIV Awards Recognizes IntechOpen's Editors"},{slug:"intechopen-joins-crossref-s-initiative-for-open-abstracts-i4oa-to-boost-the-discovery-of-research-20201005",title:"IntechOpen joins Crossref's Initiative for Open Abstracts (I4OA) to Boost the Discovery of Research"},{slug:"intechopen-hits-milestone-5-000-open-access-books-published-20200908",title:"IntechOpen hits milestone: 5,000 Open Access books published!"},{slug:"intechopen-books-hosted-on-the-mathworks-book-program-20200819",title:"IntechOpen Books Hosted on the MathWorks Book Program"}]},book:{item:{type:"book",id:"6532",leadTitle:null,fullTitle:"Drilling",title:"Drilling",subtitle:null,reviewType:"peer-reviewed",abstract:"With regard to depleted oil and gas resources, increasing world energy demands and volatile economic and political world scenarios, oil and gas industry players are working very hard to find ways to cut exploration and production costs to sustain and develop the industry to provide the world with cheap energy without harming the environment. Therefore, this book intends to provide readers with a comprehensive overview of the current state of the art in drilling, such as advanced drilling operations and techniques used by the industry, particularly in floating, underbalanced drilling, smart drilling fluid, intelligent drilling, drilling optimization, and future drilling technology and development.",isbn:"978-1-78984-304-0",printIsbn:"978-1-78984-303-3",pdfIsbn:"978-1-83881-531-8",doi:"10.5772/intechopen.71179",price:119,priceEur:129,priceUsd:155,slug:"drilling",numberOfPages:192,isOpenForSubmission:!1,isInWos:1,hash:"3bb91a4e4eb17b4395091940cf1c36fe",bookSignature:"Ariffin Samsuri",publishedDate:"October 31st 2018",coverURL:"https://cdn.intechopen.com/books/images_new/6532.jpg",numberOfDownloads:6556,numberOfWosCitations:1,numberOfCrossrefCitations:6,numberOfDimensionsCitations:9,hasAltmetrics:1,numberOfTotalCitations:16,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"September 28th 2017",dateEndSecondStepPublish:"October 19th 2017",dateEndThirdStepPublish:"December 18th 2017",dateEndFourthStepPublish:"March 8th 2018",dateEndFifthStepPublish:"May 7th 2018",currentStepOfPublishingProcess:5,indexedIn:"1,2,3,4,5,6,7",editedByType:"Edited by",kuFlag:!1,editors:[{id:"120519",title:"Prof.",name:"Ariffin",middleName:null,surname:"Samsuri",slug:"ariffin-samsuri",fullName:"Ariffin Samsuri",profilePictureURL:"https://mts.intechopen.com/storage/users/120519/images/system/120519.jfif",biography:"Professor Dr. Ariffin Samsuri is a Senior Professor of the Petroleum Engineering, Universiti Teknologi Malaysia (UTM) with vast experience in managing R&D projects, faculty and department. He had more than 36 years teaching and supervising experiences in petroleum engineering including academic program development, staffing, faculty, and facilities establishment. He also had been appointed as a visiting professor at Universiti Teknologi Petronas, peer reviewers, external examiners, expert and academic advisory panels. He has published 142 technical papers for conferences/seminars and journals, authored 6 books, 3 book chapters, translated 4 books, edited 11 books and 5 research monographs. He also involved in more than 30 research projects in production optimization, rock mechanics, wellbore stability, well stimulation, cement and cementing, drilling and drilling fluid, biofuel and nanotechnology application in oil & gas.",institutionString:"University of Technology Malaysia",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"3",totalChapterViews:"0",totalEditedBooks:"2",institution:{name:"University of Technology Malaysia",institutionURL:null,country:{name:"Malaysia"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"708",title:"Geotechnical Engineering",slug:"engineering-civil-engineering-geotechnical-engineering"}],chapters:[{id:"60796",title:"Proposing a Patent Information Approach for Identifying Technological Trends in the Brazilian Upstream Oil and Gas Industry",doi:"10.5772/intechopen.75377",slug:"proposing-a-patent-information-approach-for-identifying-technological-trends-in-the-brazilian-upstre",totalDownloads:441,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Gabriel Cavalheiro, Mariana Brandao and Saulo Rocha",downloadPdfUrl:"/chapter/pdf-download/60796",previewPdfUrl:"/chapter/pdf-preview/60796",authors:[{id:"227347",title:"Dr.",name:"Gabriel",surname:"Cavalheiro",slug:"gabriel-cavalheiro",fullName:"Gabriel Cavalheiro"},{id:"227352",title:"Dr.",name:"Mariana",surname:"Cavalheiro",slug:"mariana-cavalheiro",fullName:"Mariana Cavalheiro"},{id:"227354",title:"Dr.",name:"Saulo",surname:"Rocha",slug:"saulo-rocha",fullName:"Saulo Rocha"}],corrections:null},{id:"60352",title:"Intelligent Drilling and Coring Technologies for Unmanned Interplanetary Exploration",doi:"10.5772/intechopen.75712",slug:"intelligent-drilling-and-coring-technologies-for-unmanned-interplanetary-exploration",totalDownloads:714,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Junyue Tang, Qiquan Quan, Shengyuan Jiang, Jieneng Liang and\nZongquan Deng",downloadPdfUrl:"/chapter/pdf-download/60352",previewPdfUrl:"/chapter/pdf-preview/60352",authors:[{id:"227250",title:"Ph.D. Student",name:"Junyue",surname:"Tang",slug:"junyue-tang",fullName:"Junyue Tang"},{id:"228658",title:"Prof.",name:"Shengyuan",surname:"Jiang",slug:"shengyuan-jiang",fullName:"Shengyuan Jiang"},{id:"228668",title:"Prof.",name:"Qiquan",surname:"Quan",slug:"qiquan-quan",fullName:"Qiquan Quan"},{id:"228669",title:"Mr.",name:"Jieneng",surname:"Liang",slug:"jieneng-liang",fullName:"Jieneng Liang"},{id:"228671",title:"Prof.",name:"Zongquan",surname:"Deng",slug:"zongquan-deng",fullName:"Zongquan Deng"}],corrections:null},{id:"63944",title:"Making the Connection for Well Control on Floaters: Evolving Design Rationales for BOP Control Systems",doi:"10.5772/intechopen.77998",slug:"making-the-connection-for-well-control-on-floaters-evolving-design-rationales-for-bop-control-system",totalDownloads:820,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Paul A. Potter",downloadPdfUrl:"/chapter/pdf-download/63944",previewPdfUrl:"/chapter/pdf-preview/63944",authors:[{id:"223603",title:"Dr.",name:"Paul",surname:"Potter",slug:"paul-potter",fullName:"Paul Potter"}],corrections:null},{id:"60612",title:"Bio-Based Oil Drilling Fluid Improvements through Carbon- Based Nanoparticle Additives",doi:"10.5772/intechopen.74674",slug:"bio-based-oil-drilling-fluid-improvements-through-carbon-based-nanoparticle-additives",totalDownloads:577,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Yee Ho Chai, Suzana Yusup, Vui Soon Chok and Sonny Irawan",downloadPdfUrl:"/chapter/pdf-download/60612",previewPdfUrl:"/chapter/pdf-preview/60612",authors:[{id:"222825",title:"Dr.",name:"Dr Sonny",surname:"Irawan",slug:"dr-sonny-irawan",fullName:"Dr Sonny Irawan"},{id:"224630",title:"Prof.",name:"Suzana",surname:"Yusup",slug:"suzana-yusup",fullName:"Suzana Yusup"},{id:"227252",title:"Mr.",name:"Yee Ho",surname:"Chai",slug:"yee-ho-chai",fullName:"Yee Ho Chai"},{id:"235992",title:"Dr.",name:"Vui Soon",surname:"Chok",slug:"vui-soon-chok",fullName:"Vui Soon Chok"}],corrections:null},{id:"61366",title:"Solid Control System for Maximizing Drilling",doi:"10.5772/intechopen.76149",slug:"solid-control-system-for-maximizing-drilling",totalDownloads:595,totalCrossrefCites:1,totalDimensionsCites:1,signatures:"Sonny Irawan and Imros B. Kinif",downloadPdfUrl:"/chapter/pdf-download/61366",previewPdfUrl:"/chapter/pdf-preview/61366",authors:[{id:"222825",title:"Dr.",name:"Dr Sonny",surname:"Irawan",slug:"dr-sonny-irawan",fullName:"Dr Sonny Irawan"},{id:"223995",title:"Mr.",name:"Imros",surname:"Kinif",slug:"imros-kinif",fullName:"Imros Kinif"}],corrections:null},{id:"61383",title:"Rate of Penetration Prediction Utilizing Hydromechanical Specific Energy",doi:"10.5772/intechopen.76903",slug:"rate-of-penetration-prediction-utilizing-hydromechanical-specific-energy",totalDownloads:761,totalCrossrefCites:3,totalDimensionsCites:5,signatures:"Omogbolahan Ahmed, Ahmed Adeniran and Ariffin Samsuri",downloadPdfUrl:"/chapter/pdf-download/61383",previewPdfUrl:"/chapter/pdf-preview/61383",authors:[{id:"120519",title:"Prof.",name:"Ariffin",surname:"Samsuri",slug:"ariffin-samsuri",fullName:"Ariffin Samsuri"},{id:"222940",title:"Ph.D. Student",name:"Omogbolahan",surname:"Ahmed",slug:"omogbolahan-ahmed",fullName:"Omogbolahan Ahmed"},{id:"239856",title:"Dr.",name:"Ahmed",surname:"Adeniran",slug:"ahmed-adeniran",fullName:"Ahmed Adeniran"}],corrections:null},{id:"60598",title:"Drilling Performance Optimization Based on Mechanical Specific Energy Technologies",doi:"10.5772/intechopen.75827",slug:"drilling-performance-optimization-based-on-mechanical-specific-energy-technologies",totalDownloads:2147,totalCrossrefCites:2,totalDimensionsCites:3,signatures:"Xuyue Chen, Jin Yang and Deli Gao",downloadPdfUrl:"/chapter/pdf-download/60598",previewPdfUrl:"/chapter/pdf-preview/60598",authors:[{id:"227327",title:"Dr.",name:"Xuyue",surname:"Chen",slug:"xuyue-chen",fullName:"Xuyue Chen"},{id:"240043",title:"Prof.",name:"Jin",surname:"Yang",slug:"jin-yang",fullName:"Jin Yang"},{id:"240044",title:"Prof.",name:"Deli",surname:"Gao",slug:"deli-gao",fullName:"Deli Gao"}],corrections:null},{id:"60339",title:"New Development of Air and Gas Drilling Technology",doi:"10.5772/intechopen.75785",slug:"new-development-of-air-and-gas-drilling-technology",totalDownloads:501,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Jun Li, Yulong Yang, Boyun Guo and Gonghui Liu",downloadPdfUrl:"/chapter/pdf-download/60339",previewPdfUrl:"/chapter/pdf-preview/60339",authors:[{id:"228602",title:"Prof.",name:"Jun",surname:"Li",slug:"jun-li",fullName:"Jun Li"},{id:"239391",title:"Prof.",name:"Gonghui",surname:"Liu",slug:"gonghui-liu",fullName:"Gonghui Liu"},{id:"239392",title:"Prof.",name:"Boyun",surname:"Guo",slug:"boyun-guo",fullName:"Boyun Guo"},{id:"239393",title:"Dr.",name:"Yulong",surname:"Yang",slug:"yulong-yang",fullName:"Yulong Yang"}],corrections:null}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},relatedBooks:[{type:"book",id:"7609",title:"Enhanced Oil Recovery Processes",subtitle:"New Technologies",isOpenForSubmission:!1,hash:"62359d9c21b76f899be04fa0f8b46668",slug:"enhanced-oil-recovery-processes-new-technologies",bookSignature:"Ariffin Samsuri",coverURL:"https://cdn.intechopen.com/books/images_new/7609.jpg",editedByType:"Edited by",editors:[{id:"120519",title:"Prof.",name:"Ariffin",surname:"Samsuri",slug:"ariffin-samsuri",fullName:"Ariffin Samsuri"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3717",title:"Geoscience and Remote Sensing",subtitle:"New Achievements",isOpenForSubmission:!1,hash:null,slug:"geoscience-and-remote-sensing-new-achievements",bookSignature:"Pasquale Imperatore and Daniele Riccio",coverURL:"https://cdn.intechopen.com/books/images_new/3717.jpg",editedByType:"Edited by",editors:[{id:"4222",title:"Dr.",name:"Pasquale",surname:"Imperatore",slug:"pasquale-imperatore",fullName:"Pasquale Imperatore"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8240",title:"Geotechnical Engineering",subtitle:"Advances in Soil Mechanics and Foundation Engineering",isOpenForSubmission:!1,hash:"2a3c20b826fa5a5cf4693e418eb1c909",slug:"geotechnical-engineering-advances-in-soil-mechanics-and-foundation-engineering",bookSignature:"Sayed Hemeda and Mehmet Barış Can Ülker",coverURL:"https://cdn.intechopen.com/books/images_new/8240.jpg",editedByType:"Edited by",editors:[{id:"258282",title:"Prof.",name:"Sayed",surname:"Hemeda",slug:"sayed-hemeda",fullName:"Sayed Hemeda"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophanides",surname:"Theophile",slug:"theophanides-theophile",fullName:"Theophanides Theophile"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3092",title:"Anopheles mosquitoes",subtitle:"New insights into malaria vectors",isOpenForSubmission:!1,hash:"c9e622485316d5e296288bf24d2b0d64",slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",bookSignature:"Sylvie Manguin",coverURL:"https://cdn.intechopen.com/books/images_new/3092.jpg",editedByType:"Edited by",editors:[{id:"50017",title:"Prof.",name:"Sylvie",surname:"Manguin",slug:"sylvie-manguin",fullName:"Sylvie Manguin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"57",title:"Physics and Applications of Graphene",subtitle:"Experiments",isOpenForSubmission:!1,hash:"0e6622a71cf4f02f45bfdd5691e1189a",slug:"physics-and-applications-of-graphene-experiments",bookSignature:"Sergey Mikhailov",coverURL:"https://cdn.intechopen.com/books/images_new/57.jpg",editedByType:"Edited by",editors:[{id:"16042",title:"Dr.",name:"Sergey",surname:"Mikhailov",slug:"sergey-mikhailov",fullName:"Sergey Mikhailov"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"371",title:"Abiotic Stress in Plants",subtitle:"Mechanisms and Adaptations",isOpenForSubmission:!1,hash:"588466f487e307619849d72389178a74",slug:"abiotic-stress-in-plants-mechanisms-and-adaptations",bookSignature:"Arun Shanker and B. Venkateswarlu",coverURL:"https://cdn.intechopen.com/books/images_new/371.jpg",editedByType:"Edited by",editors:[{id:"58592",title:"Dr.",name:"Arun",surname:"Shanker",slug:"arun-shanker",fullName:"Arun Shanker"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],ofsBooks:[]},correction:{item:{id:"68579",slug:"corrigendum-to-industrial-heat-exchanger-operation-and-maintenance-to-minimize-fouling-and-corrosion",title:"Corrigendum to: Industrial Heat Exchanger: Operation and Maintenance to Minimize Fouling and Corrosion",doi:null,correctionPDFUrl:"https://cdn.intechopen.com/pdfs/68579.pdf",downloadPdfUrl:"/chapter/pdf-download/68579",previewPdfUrl:"/chapter/pdf-preview/68579",totalDownloads:null,totalCrossrefCites:null,bibtexUrl:"/chapter/bibtex/68579",risUrl:"/chapter/ris/68579",chapter:{id:"52929",slug:"industrial-heat-exchanger-operation-and-maintenance-to-minimize-fouling-and-corrosion",signatures:"Teng Kah Hou, Salim Newaz Kazi, Abu Bakar Mahat, Chew Bee Teng,\nAhmed Al-Shamma’a and Andy Shaw",dateSubmitted:"March 23rd 2016",dateReviewed:"October 10th 2016",datePrePublished:null,datePublished:"April 26th 2017",book:{id:"6080",title:"Heat Exchangers",subtitle:"Advanced Features and Applications",fullTitle:"Heat Exchangers - Advanced Features and Applications",slug:"heat-exchangers-advanced-features-and-applications",publishedDate:"April 26th 2017",bookSignature:"S M Sohel Murshed and Manuel Matos Lopes",coverURL:"https://cdn.intechopen.com/books/images_new/6080.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"24904",title:"Prof.",name:"S. M. Sohel",middleName:null,surname:"Murshed",slug:"s.-m.-sohel-murshed",fullName:"S. M. Sohel Murshed"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"93483",title:"Dr.",name:"Salim Newaz",middleName:null,surname:"Kazi",fullName:"Salim Newaz Kazi",slug:"salim-newaz-kazi",email:"salimnewaz@um.edu.my",position:null,institution:{name:"University of Malaya",institutionURL:null,country:{name:"Malaysia"}}},{id:"187135",title:"Ph.D.",name:"Kah Hou",middleName:null,surname:"Teng",fullName:"Kah Hou Teng",slug:"kah-hou-teng",email:"alex_teng1989@hotmail.com",position:null,institution:{name:"Liverpool John Moores University",institutionURL:null,country:{name:"United Kingdom"}}},{id:"194347",title:"Prof.",name:"Abu Bakar",middleName:null,surname:"Mahat",fullName:"Abu Bakar Mahat",slug:"abu-bakar-mahat",email:"ir_abakar@um.edu.my",position:null,institution:null},{id:"194348",title:"Dr.",name:"Bee Teng",middleName:null,surname:"Chew",fullName:"Bee Teng Chew",slug:"bee-teng-chew",email:"chewbeeteng@um.edu.my",position:null,institution:null},{id:"194349",title:"Prof.",name:"Ahmed",middleName:null,surname:"Al-Shamma'A",fullName:"Ahmed Al-Shamma'A",slug:"ahmed-al-shamma'a",email:"A.Al-Shamma'a@ljmu.ac.uk",position:null,institution:null},{id:"194350",title:"Prof.",name:"Andy",middleName:null,surname:"Shaw",fullName:"Andy Shaw",slug:"andy-shaw",email:"A.Shaw@ljmu.ac.uk",position:null,institution:null}]}},chapter:{id:"52929",slug:"industrial-heat-exchanger-operation-and-maintenance-to-minimize-fouling-and-corrosion",signatures:"Teng Kah Hou, Salim Newaz Kazi, Abu Bakar Mahat, Chew Bee Teng,\nAhmed Al-Shamma’a and Andy Shaw",dateSubmitted:"March 23rd 2016",dateReviewed:"October 10th 2016",datePrePublished:null,datePublished:"April 26th 2017",book:{id:"6080",title:"Heat Exchangers",subtitle:"Advanced Features and Applications",fullTitle:"Heat Exchangers - Advanced Features and Applications",slug:"heat-exchangers-advanced-features-and-applications",publishedDate:"April 26th 2017",bookSignature:"S M Sohel Murshed and Manuel Matos Lopes",coverURL:"https://cdn.intechopen.com/books/images_new/6080.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"24904",title:"Prof.",name:"S. M. Sohel",middleName:null,surname:"Murshed",slug:"s.-m.-sohel-murshed",fullName:"S. M. Sohel Murshed"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"93483",title:"Dr.",name:"Salim Newaz",middleName:null,surname:"Kazi",fullName:"Salim Newaz Kazi",slug:"salim-newaz-kazi",email:"salimnewaz@um.edu.my",position:null,institution:{name:"University of Malaya",institutionURL:null,country:{name:"Malaysia"}}},{id:"187135",title:"Ph.D.",name:"Kah Hou",middleName:null,surname:"Teng",fullName:"Kah Hou Teng",slug:"kah-hou-teng",email:"alex_teng1989@hotmail.com",position:null,institution:{name:"Liverpool John Moores University",institutionURL:null,country:{name:"United Kingdom"}}},{id:"194347",title:"Prof.",name:"Abu Bakar",middleName:null,surname:"Mahat",fullName:"Abu Bakar Mahat",slug:"abu-bakar-mahat",email:"ir_abakar@um.edu.my",position:null,institution:null},{id:"194348",title:"Dr.",name:"Bee Teng",middleName:null,surname:"Chew",fullName:"Bee Teng Chew",slug:"bee-teng-chew",email:"chewbeeteng@um.edu.my",position:null,institution:null},{id:"194349",title:"Prof.",name:"Ahmed",middleName:null,surname:"Al-Shamma'A",fullName:"Ahmed Al-Shamma'A",slug:"ahmed-al-shamma'a",email:"A.Al-Shamma'a@ljmu.ac.uk",position:null,institution:null},{id:"194350",title:"Prof.",name:"Andy",middleName:null,surname:"Shaw",fullName:"Andy Shaw",slug:"andy-shaw",email:"A.Shaw@ljmu.ac.uk",position:null,institution:null}]},book:{id:"6080",title:"Heat Exchangers",subtitle:"Advanced Features and Applications",fullTitle:"Heat Exchangers - Advanced Features and Applications",slug:"heat-exchangers-advanced-features-and-applications",publishedDate:"April 26th 2017",bookSignature:"S M Sohel Murshed and Manuel Matos Lopes",coverURL:"https://cdn.intechopen.com/books/images_new/6080.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"24904",title:"Prof.",name:"S. M. Sohel",middleName:null,surname:"Murshed",slug:"s.-m.-sohel-murshed",fullName:"S. M. Sohel Murshed"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}}},ofsBook:{item:{type:"book",id:"8640",leadTitle:null,title:"Cancer Chemoresistance",subtitle:null,reviewType:"peer-reviewed",abstract:"
\r\n\tNeoplasia is considered to be the result of aberrations in the homeostatic mechanisms regulating cell turnover. This may be due to a combination of genetic, epigenetic and stochastic factors. Drug resistance is one of the major reasons for treatment failure and tumor relapse. Hence, an improved understanding of the mechanisms of neoplastic growth is possible based on systematic cataloging of the druggable targets for each of the major hallmarks of cancer. This approach can also aid in the refinement and validation of the in vitro and in vivo models, as well as provide pointers for the development of novel systems. Genomic instability and mutation, as well as tumor-promoting inflammation should be included as underlying factors influencing the process of neoplasia along with factors dysregulating energetics. The focus of this book is to update the reader on an integrated perspective including epigenetics data and corroborative mechanistic evidence from multiple model systems including humans. This will enable the reader to better comprehend the current scenario in terms of the pharmacological aspects pertaining to cancer chemoresistance. Also, the challenges for the molecular oncology will be discussed as well as probable strategies and a road-map for cancer chemotherapeutic drug development.
",isbn:null,printIsbn:null,pdfIsbn:null,doi:null,price:0,priceEur:null,priceUsd:null,slug:null,numberOfPages:0,isOpenForSubmission:!1,hash:"2a80fe34c552bb6ca76ef9cd8f21e377",bookSignature:"Dr. Suresh P.K.",publishedDate:null,coverURL:"https://cdn.intechopen.com/books/images_new/8640.jpg",keywords:"Molecular Mechanisms of Aberrations, Proliferation Mechanisms, Types of Cell Death, Signal Transduction Pathways, Angiogenesis in Cancer, Angiogenesis in Wound Healing, Molecular Mechanisms of Invasion, Molecular Mechanisms of Metastasis, Telomeres, Stem Cells, Delivery Challenges, Evasion Mechanisms",numberOfDownloads:null,numberOfWosCitations:0,numberOfCrossrefCitations:0,numberOfDimensionsCitations:null,numberOfTotalCitations:null,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"November 5th 2018",dateEndSecondStepPublish:"November 26th 2018",dateEndThirdStepPublish:"January 25th 2019",dateEndFourthStepPublish:"April 15th 2019",dateEndFifthStepPublish:"June 14th 2019",remainingDaysToSecondStep:"2 years",secondStepPassed:!0,currentStepOfPublishingProcess:5,editedByType:null,kuFlag:!1,biosketch:null,coeditorOneBiosketch:null,coeditorTwoBiosketch:null,coeditorThreeBiosketch:null,coeditorFourBiosketch:null,coeditorFiveBiosketch:null,editors:[{id:"190244",title:"Dr.",name:"Suresh",middleName:null,surname:"P.K.",slug:"suresh-p.k.",fullName:"Suresh P.K.",profilePictureURL:"https://mts.intechopen.com/storage/users/190244/images/system/190244.jpeg",biography:"P.K. Suresh is a Professor at the School of Biosciences & Technology, VIT, Vellore (2009 to date). He has approximately 18.5 years of teaching, research and administrative experience in Biotechnology & Industrial Biotechnology and allied disciplines. He had also headed Biotechnology & Industrial Biotechnology departments and has handled a wide variety of theory papers. He has 45 research publications in SCOPUS-indexed journals and has completed 3 funded projects as the Principal Investigator. He has made several presentations at International conferences. He has guided 5 doctoral students (2 as co-guide) and is currently guiding 5 students in the doctoral program. He has organized and participated actively in several Faculty Development Programs in areas as diverse as Stem Cells, Bio-inspired Design and Pharmacokinetics and was also a resource person in these events.",institutionString:"School of Biosciences & Technology",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"0",totalChapterViews:"0",totalEditedBooks:"0",institution:{name:"Vellore Institute of Technology University",institutionURL:null,country:{name:"India"}}}],coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"6",title:"Biochemistry, Genetics and Molecular Biology",slug:"biochemistry-genetics-and-molecular-biology"}],chapters:null,productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},personalPublishingAssistant:{id:"177731",firstName:"Dajana",lastName:"Pemac",middleName:null,title:"Ms.",imageUrl:"https://mts.intechopen.com/storage/users/177731/images/4726_n.jpg",email:"dajana@intechopen.com",biography:"As a Commissioning Editor at IntechOpen, I work closely with our collaborators in the selection of book topics for the yearly publishing plan and in preparing new book catalogues for each season. This requires extensive analysis of developing trends in scientific research in order to offer our readers relevant content. Creating the book catalogue is also based on keeping track of the most read, downloaded and highly cited chapters and books and relaunching similar topics. I am also responsible for consulting with our Scientific Advisors on which book topics to add to our catalogue and sending possible book proposal topics to them for evaluation. Once the catalogue is complete, I contact leading researchers in their respective fields and ask them to become possible Academic Editors for each book project. Once an editor is appointed, I prepare all necessary information required for them to begin their work, as well as guide them through the editorship process. I also assist editors in inviting suitable authors to contribute to a specific book project and each year, I identify and invite exceptional editors to join IntechOpen as Scientific Advisors. I am responsible for developing and maintaining strong relationships with all collaborators to ensure an effective and efficient publishing process and support other departments in developing and maintaining such relationships."}},relatedBooks:[{type:"book",id:"6694",title:"New Trends in Ion Exchange Studies",subtitle:null,isOpenForSubmission:!1,hash:"3de8c8b090fd8faa7c11ec5b387c486a",slug:"new-trends-in-ion-exchange-studies",bookSignature:"Selcan Karakuş",coverURL:"https://cdn.intechopen.com/books/images_new/6694.jpg",editedByType:"Edited by",editors:[{id:"206110",title:"Dr.",name:"Selcan",surname:"Karakuş",slug:"selcan-karakus",fullName:"Selcan Karakuş"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophanides",surname:"Theophile",slug:"theophanides-theophile",fullName:"Theophanides Theophile"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3092",title:"Anopheles mosquitoes",subtitle:"New insights into malaria vectors",isOpenForSubmission:!1,hash:"c9e622485316d5e296288bf24d2b0d64",slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",bookSignature:"Sylvie Manguin",coverURL:"https://cdn.intechopen.com/books/images_new/3092.jpg",editedByType:"Edited by",editors:[{id:"50017",title:"Prof.",name:"Sylvie",surname:"Manguin",slug:"sylvie-manguin",fullName:"Sylvie Manguin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"371",title:"Abiotic Stress in Plants",subtitle:"Mechanisms and Adaptations",isOpenForSubmission:!1,hash:"588466f487e307619849d72389178a74",slug:"abiotic-stress-in-plants-mechanisms-and-adaptations",bookSignature:"Arun Shanker and B. Venkateswarlu",coverURL:"https://cdn.intechopen.com/books/images_new/371.jpg",editedByType:"Edited by",editors:[{id:"58592",title:"Dr.",name:"Arun",surname:"Shanker",slug:"arun-shanker",fullName:"Arun Shanker"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"314",title:"Regenerative Medicine and Tissue Engineering",subtitle:"Cells and Biomaterials",isOpenForSubmission:!1,hash:"bb67e80e480c86bb8315458012d65686",slug:"regenerative-medicine-and-tissue-engineering-cells-and-biomaterials",bookSignature:"Daniel Eberli",coverURL:"https://cdn.intechopen.com/books/images_new/314.jpg",editedByType:"Edited by",editors:[{id:"6495",title:"Dr.",name:"Daniel",surname:"Eberli",slug:"daniel-eberli",fullName:"Daniel Eberli"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"57",title:"Physics and Applications of Graphene",subtitle:"Experiments",isOpenForSubmission:!1,hash:"0e6622a71cf4f02f45bfdd5691e1189a",slug:"physics-and-applications-of-graphene-experiments",bookSignature:"Sergey Mikhailov",coverURL:"https://cdn.intechopen.com/books/images_new/57.jpg",editedByType:"Edited by",editors:[{id:"16042",title:"Dr.",name:"Sergey",surname:"Mikhailov",slug:"sergey-mikhailov",fullName:"Sergey Mikhailov"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"2270",title:"Fourier Transform",subtitle:"Materials Analysis",isOpenForSubmission:!1,hash:"5e094b066da527193e878e160b4772af",slug:"fourier-transform-materials-analysis",bookSignature:"Salih Mohammed Salih",coverURL:"https://cdn.intechopen.com/books/images_new/2270.jpg",editedByType:"Edited by",editors:[{id:"111691",title:"Dr.Ing.",name:"Salih",surname:"Salih",slug:"salih-salih",fullName:"Salih Salih"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},chapter:{item:{type:"chapter",id:"68505",title:"Research Design and Methodology",doi:"10.5772/intechopen.85731",slug:"research-design-and-methodology",body:'Research methodology is the path through which researchers need to conduct their research. It shows the path through which these researchers formulate their problem and objective and present their result from the data obtained during the study period. This research design and methodology chapter also shows how the research outcome at the end will be obtained in line with meeting the objective of the study. This chapter hence discusses the research methods that were used during the research process. It includes the research methodology of the study from the research strategy to the result dissemination. For emphasis, in this chapter, the author outlines the research strategy, research design, research methodology, the study area, data sources such as primary data sources and secondary data, population consideration and sample size determination such as questionnaires sample size determination and workplace site exposure measurement sample determination, data collection methods like primary data collection methods including workplace site observation data collection and data collection through desk review, data collection through questionnaires, data obtained from experts opinion, workplace site exposure measurement, data collection tools pretest, secondary data collection methods, methods of data analysis used such as quantitative data analysis and qualitative data analysis, data analysis software, the reliability and validity analysis of the quantitative data, reliability of data, reliability analysis, validity, data quality management, inclusion criteria, ethical consideration and dissemination of result and its utilization approaches. In order to satisfy the objectives of the study, a qualitative and quantitative research method is apprehended in general. The study used these mixed strategies because the data were obtained from all aspects of the data source during the study time. Therefore, the purpose of this methodology is to satisfy the research plan and target devised by the researcher.
The research design is intended to provide an appropriate framework for a study. A very significant decision in research design process is the choice to be made regarding research approach since it determines how relevant information for a study will be obtained; however, the research design process involves many interrelated decisions [1].
This study employed a mixed type of methods. The first part of the study consisted of a series of well-structured questionnaires (for management, employee’s representatives, and technician of industries) and semi-structured interviews with key stakeholders (government bodies, ministries, and industries) in participating organizations. The other design used is an interview of employees to know how they feel about safety and health of their workplace, and field observation at the selected industrial sites was undertaken.
Hence, this study employs a descriptive research design to agree on the effects of occupational safety and health management system on employee health, safety, and property damage for selected manufacturing industries. Saunders et al. [2] and Miller [3] say that descriptive research portrays an accurate profile of persons, events, or situations. This design offers to the researchers a profile of described relevant aspects of the phenomena of interest from an individual, organizational, and industry-oriented perspective. Therefore, this research design enabled the researchers to gather data from a wide range of respondents on the impact of safety and health on manufacturing industries in Ethiopia. And this helped in analyzing the response obtained on how it affects the manufacturing industries’ workplace safety and health. The research overall design and flow process are depicted in Figure 1.
Research methods and processes (author design).
To address the key research objectives, this research used both qualitative and quantitative methods and combination of primary and secondary sources. The qualitative data supports the quantitative data analysis and results. The result obtained is triangulated since the researcher utilized the qualitative and quantitative data types in the data analysis. The study area, data sources, and sampling techniques were discussed under this section.
According to Fraenkel and Warren [4] studies, population refers to the complete set of individuals (subjects or events) having common characteristics in which the researcher is interested. The population of the study was determined based on random sampling system. This data collection was conducted from March 07, 2015 to December 10, 2016, from selected manufacturing industries found in Addis Ababa city and around. The manufacturing companies were selected based on their employee number, established year, and the potential accidents prevailing and the manufacturing industry type even though all criterions were difficult to satisfy.
It was obtained from the original source of information. The primary data were more reliable and have more confidence level of decision-making with the trusted analysis having direct intact with occurrence of the events. The primary data sources are industries’ working environment (through observation, pictures, and photograph) and industry employees (management and bottom workers) (interview, questionnaires and discussions).
Desk review has been conducted to collect data from various secondary sources. This includes reports and project documents at each manufacturing sectors (more on medium and large level). Secondary data sources have been obtained from literatures regarding OSH, and the remaining data were from the companies’ manuals, reports, and some management documents which were included under the desk review. Reputable journals, books, different articles, periodicals, proceedings, magazines, newsletters, newspapers, websites, and other sources were considered on the manufacturing industrial sectors. The data also obtained from the existing working documents, manuals, procedures, reports, statistical data, policies, regulations, and standards were taken into account for the review.
In general, for this research study, the desk review has been completed to this end, and it had been polished and modified upon manuals and documents obtained from the selected companies.
The study population consisted of manufacturing industries’ employees in Addis Ababa city and around as there are more representative manufacturing industrial clusters found. To select representative manufacturing industrial sector population, the types of the industries expected were more potential to accidents based on random and purposive sampling considered. The population of data was from textile, leather, metal, chemicals, and food manufacturing industries. A total of 189 sample sizes of industries responded to the questionnaire survey from the priority areas of the government. Random sample sizes and disproportionate methods were used, and 80 from wood, metal, and iron works; 30 from food, beverage, and tobacco products; 50 from leather, textile, and garments; 20 from chemical and chemical products; and 9 from other remaining 9 clusters of manufacturing industries responded.
A simple random sampling and purposive sampling methods were used to select the representative manufacturing industries and respondents for the study. The simple random sampling ensures that each member of the population has an equal chance for the selection or the chance of getting a response which can be more than equal to the chance depending on the data analysis justification. Sample size determination procedure was used to get optimum and reasonable information. In this study, both probability (simple random sampling) and nonprobability (convenience, quota, purposive, and judgmental) sampling methods were used as the nature of the industries are varied. This is because of the characteristics of data sources which permitted the researchers to follow the multi-methods. This helps the analysis to triangulate the data obtained and increase the reliability of the research outcome and its decision. The companies’ establishment time and its engagement in operation, the number of employees and the proportion it has, the owner types (government and private), type of manufacturing industry/production, types of resource used at work, and the location it is found in the city and around were some of the criteria for the selections.
The determination of the sample size was adopted from Daniel [5] and Cochran [6] formula. The formula used was for unknown population size Eq. (1) and is given as
where n = sample size, Z = statistic for a level of confidence, P = expected prevalence or proportion (in proportion of one; if 50%, P = 0.5), and d = precision (in proportion of one; if 6%, d = 0.06). Z statistic (Z): for the level of confidence of 95%, which is conventional, Z value is 1.96. In this study, investigators present their results with 95% confidence intervals (CI).
The expected sample number was 267 at the marginal error of 6% for 95% confidence interval of manufacturing industries. However, the collected data indicated that only 189 populations were used for the analysis after rejecting some data having more missing values in the responses from the industries. Hence, the actual data collection resulted in 71% response rate. The 267 population were assumed to be satisfactory and representative for the data analysis.
The sample size for the experimental exposure measurements of physical work environment has been considered based on the physical data prepared for questionnaires and respondents. The response of positive were considered for exposure measurement factors to be considered for the physical environment health and disease causing such as noise intensity, light intensity, pressure/stress, vibration, temperature/coldness, or hotness and dust particles on 20 workplace sites. The selection method was using random sampling in line with purposive method. The measurement of the exposure factors was done in collaboration with Addis Ababa city Administration and Oromia Bureau of Labour and Social Affair (AACBOLSA). Some measuring instruments were obtained from the Addis Ababa city and Oromia Bureau of Labour and Social Affair.
Data collection methods were focused on the followings basic techniques. These included secondary and primary data collections focusing on both qualitative and quantitative data as defined in the previous section. The data collection mechanisms are devised and prepared with their proper procedures.
Primary data sources are qualitative and quantitative. The qualitative sources are field observation, interview, and informal discussions, while that of quantitative data sources are survey questionnaires and interview questions. The next sections elaborate how the data were obtained from the primary sources.
Observation is an important aspect of science. Observation is tightly connected to data collection, and there are different sources for this: documentation, archival records, interviews, direct observations, and participant observations. Observational research findings are considered strong in validity because the researcher is able to collect a depth of information about a particular behavior. In this dissertation, the researchers used observation method as one tool for collecting information and data before questionnaire design and after the start of research too. The researcher made more than 20 specific observations of manufacturing industries in the study areas. During the observations, it found a deeper understanding of the working environment and the different sections in the production system and OSH practices.
Interview is a loosely structured qualitative in-depth interview with people who are considered to be particularly knowledgeable about the topic of interest. The semi-structured interview is usually conducted in a face-to-face setting which permits the researcher to seek new insights, ask questions, and assess phenomena in different perspectives. It let the researcher to know the in-depth of the present working environment influential factors and consequences. It has provided opportunities for refining data collection efforts and examining specialized systems or processes. It was used when the researcher faces written records or published document limitation or wanted to triangulate the data obtained from other primary and secondary data sources.
This dissertation is also conducted with a qualitative approach and conducting interviews. The advantage of using interviews as a method is that it allows respondents to raise issues that the interviewer may not have expected. All interviews with employees, management, and technicians were conducted by the corresponding researcher, on a face-to-face basis at workplace. All interviews were recorded and transcribed.
The main tool for gaining primary information in practical research is questionnaires, due to the fact that the researcher can decide on the sample and the types of questions to be asked [2].
In this dissertation, each respondent is requested to reply to an identical list of questions mixed so that biasness was prevented. Initially the questionnaire design was coded and mixed up from specific topic based on uniform structures. Consequently, the questionnaire produced valuable data which was required to achieve the dissertation objectives.
The questionnaires developed were based on a five-item Likert scale. Responses were given to each statement using a five-point Likert-type scale, for which 1 = “strongly disagree” to 5 = “strongly agree.” The responses were summed up to produce a score for the measures.
The data was also obtained from the expert’s opinion related to the comparison of the knowledge, management, collaboration, and technology utilization including their sub-factors. The data obtained in this way was used for prioritization and decision-making of OSH, improving factor priority. The prioritization of the factors was using Saaty scales (1–9) and then converting to Fuzzy set values obtained from previous researches using triangular fuzzy set [7].
The researcher has measured the workplace environment for dust, vibration, heat, pressure, light, and noise to know how much is the level of each variable. The primary data sources planned and an actual coverage has been compared as shown in Table 1.
Planned versus actual coverage of the survey.
The response rate for the proposed data source was good, and the pilot test also proved the reliability of questionnaires. Interview/discussion resulted in 87% of responses among the respondents; the survey questionnaire response rate obtained was 71%, and the field observation response rate was 90% for the whole data analysis process. Hence, the data organization quality level has not been compromised.
This response rate is considered to be representative of studies of organizations. As the study agrees on the response rate to be 30%, it is considered acceptable [8]. Saunders et al. [2] argued that the questionnaire with a scale response of 20% response rate is acceptable. Low response rate should not discourage the researchers, because a great deal of published research work also achieves low response rate. Hence, the response rate of this study is acceptable and very good for the purpose of meeting the study objectives.
The pretest for questionnaires, interviews, and tools were conducted to validate that the tool content is valid or not in the sense of the respondents’ understanding. Hence, content validity (in which the questions are answered to the target without excluding important points), internal validity (in which the questions raised answer the outcomes of researchers’ target), and external validity (in which the result can generalize to all the population from the survey sample population) were reflected. It has been proved with this pilot test prior to the start of the basic data collections. Following feedback process, a few minor changes were made to the originally designed data collect tools. The pilot test made for the questionnaire test was on 10 sample sizes selected randomly from the target sectors and experts.
The secondary data refers to data that was collected by someone other than the user. This data source gives insights of the research area of the current state-of-the-art method. It also makes some sort of research gap that needs to be filled by the researcher. This secondary data sources could be internal and external data sources of information that may cover a wide range of areas.
Literature/desk review and industry documents and reports: To achieve the dissertation’s objectives, the researcher has conducted excessive document review and reports of the companies in both online and offline modes. From a methodological point of view, literature reviews can be comprehended as content analysis, where quantitative and qualitative aspects are mixed to assess structural (descriptive) as well as content criteria.
A literature search was conducted using the database sources like MEDLINE; Emerald; Taylor and Francis publications; EMBASE (medical literature); PsycINFO (psychological literature); Sociological Abstracts (sociological literature); accident prevention journals; US Statistics of Labor, European Safety and Health database; ABI Inform; Business Source Premier (business/management literature); EconLit (economic literature); Social Service Abstracts (social work and social service literature); and other related materials. The search strategy was focused on articles or reports that measure one or more of the dimensions within the research OSH model framework. This search strategy was based on a framework and measurement filter strategy developed by the Consensus-Based Standards for the Selection of Health Measurement Instruments (COSMIN) group. Based on screening, unrelated articles to the research model and objectives were excluded. Prior to screening, researcher (principal investigator) reviewed a sample of more than 2000 articles, websites, reports, and guidelines to determine whether they should be included for further review or reject. Discrepancies were thoroughly identified and resolved before the review of the main group of more than 300 articles commenced. After excluding the articles based on the title, keywords, and abstract, the remaining articles were reviewed in detail, and the information was extracted on the instrument that was used to assess the dimension of research interest. A complete list of items was then collated within each research targets or objectives and reviewed to identify any missing elements.
Data analysis method follows the procedures listed under the following sections. The data analysis part answered the basic questions raised in the problem statement. The detailed analysis of the developed and developing countries’ experiences on OSH regarding manufacturing industries was analyzed, discussed, compared and contrasted, and synthesized.
Quantitative data were obtained from primary and secondary data discussed above in this chapter. This data analysis was based on their data type using Excel, SPSS 20.0, Office Word format, and other tools. This data analysis focuses on numerical/quantitative data analysis.
Before analysis, data coding of responses and analysis were made. In order to analyze the data obtained easily, the data were coded to SPSS 20.0 software as the data obtained from questionnaires. This task involved identifying, classifying, and assigning a numeric or character symbol to data, which was done in only one way pre-coded [9, 10]. In this study, all of the responses were pre-coded. They were taken from the list of responses, a number of corresponding to a particular selection was given. This process was applied to every earlier question that needed this treatment. Upon completion, the data were then entered to a statistical analysis software package, SPSS version 20.0 on Windows 10 for the next steps.
Under the data analysis, exploration of data has been made with descriptive statistics and graphical analysis. The analysis included exploring the relationship between variables and comparing groups how they affect each other. This has been done using cross tabulation/chi square, correlation, and factor analysis and using nonparametric statistic.
Qualitative data analysis used for triangulation of the quantitative data analysis. The interview, observation, and report records were used to support the findings. The analysis has been incorporated with the quantitative discussion results in the data analysis parts.
The data were entered using SPSS 20.0 on Windows 10 and analyzed. The analysis supported with SPSS software much contributed to the finding. It had contributed to the data validation and correctness of the SPSS results. The software analyzed and compared the results of different variables used in the research questionnaires. Excel is also used to draw the pictures and calculate some analytical solutions.
The reliability of measurements specifies the amount to which it is without bias (error free) and hence ensures consistent measurement across time and across the various items in the instrument [8]. In reliability analysis, it has been checked for the stability and consistency of the data. In the case of reliability analysis, the researcher checked the accuracy and precision of the procedure of measurement. Reliability has numerous definitions and approaches, but in several environments, the concept comes to be consistent [8]. The measurement fulfills the requirements of reliability when it produces consistent results during data analysis procedure. The reliability is determined through Cranach’s alpha as shown in Table 2.
Internal consistency and reliability test of questionnaires items.
K stands for knowledge; M, management; T, technology; C, collaboration; P, policy, standards, and regulation; H, hazards and accident conditions; PPE, personal protective equipment.
Cronbach’s alpha is a measure of internal consistency, i.e., how closely related a set of items are as a group [11]. It is considered to be a measure of scale reliability. The reliability of internal consistency most of the time is measured based on the Cronbach’s alpha value. Reliability coefficient of 0.70 and above is considered “acceptable” in most research situations [12]. In this study, reliability analysis for internal consistency of Likert-scale measurement after deleting 13 items was found similar; the reliability coefficients were found for 76 items were 0.964 and for the individual groupings made shown in Table 2. It was also found internally consistent using the Cronbach’s alpha test. Table 2 shows the internal consistency of the seven major instruments in which their reliability falls in the acceptable range for this research.
Face validity used as defined by Babbie [13] is an indicator that makes it seem a reasonable measure of some variables, and it is the subjective judgment that the instrument measures what it intends to measure in terms of relevance [14]. Thus, the researcher ensured, in this study, when developing the instruments that uncertainties were eliminated by using appropriate words and concepts in order to enhance clarity and general suitability [14]. Furthermore, the researcher submitted the instruments to the research supervisor and the joint supervisor who are both occupational health experts, to ensure validity of the measuring instruments and determine whether the instruments could be considered valid on face value.
In this study, the researcher was guided by reviewed literature related to compliance with the occupational health and safety conditions and data collection methods before he could develop the measuring instruments. In addition, the pretest study that was conducted prior to the main study assisted the researcher to avoid uncertainties of the contents in the data collection measuring instruments. A thorough inspection of the measuring instruments by the statistician and the researcher’s supervisor and joint experts, to ensure that all concepts pertaining to the study were included, ensured that the instruments were enriched.
Insight has been given to the data collectors on how to approach companies, and many of the questionnaires were distributed through MSc students at Addis Ababa Institute of Technology (AAiT) and manufacturing industries’ experience experts. This made the data quality reliable as it has been continually discussed with them. Pretesting for questionnaire was done on 10 workers to assure the quality of the data and for improvement of data collection tools. Supervision during data collection was done to understand how the data collectors are handling the questionnaire, and each filled questionnaires was checked for its completeness, accuracy, clarity, and consistency on a daily basis either face-to-face or by phone/email. The data expected in poor quality were rejected out of the acting during the screening time. Among planned 267 questionnaires, 189 were responded back. Finally, it was analyzed by the principal investigator.
The data were collected from the company representative with the knowledge of OSH. Articles written in English and Amharic were included in this study. Database information obtained in relation to articles and those who have OSH area such as interventions method, method of accident identification, impact of occupational accidents, types of occupational injuries/disease, and impact of occupational accidents, and disease on productivity and costs of company and have used at least one form of feedback mechanism. No specific time period was chosen in order to access all available published papers. The questionnaire statements which are similar in the questionnaire have been rejected from the data analysis.
Ethical clearance was obtained from the School of Mechanical and Industrial Engineering, Institute of Technology, Addis Ababa University. Official letters were written from the School of Mechanical and Industrial Engineering to the respective manufacturing industries. The purpose of the study was explained to the study subjects. The study subjects were told that the information they provided was kept confidential and that their identities would not be revealed in association with the information they provided. Informed consent was secured from each participant. For bad working environment assessment findings, feedback will be given to all manufacturing industries involved in the study. There is a plan to give a copy of the result to the respective study manufacturing industries’ and ministries’ offices. The respondents’ privacy and their responses were not individually analyzed and included in the report.
The result of this study will be presented to the Addis Ababa University, AAiT, School of Mechanical and Industrial Engineering. It will also be communicated to the Ethiopian manufacturing industries, Ministry of Labor and Social Affair, Ministry of Industry, and Ministry of Health from where the data was collected. The result will also be availed by publication and online presentation in Google Scholars. To this end, about five articles were published and disseminated to the whole world.
The research methodology and design indicated overall process of the flow of the research for the given study. The data sources and data collection methods were used. The overall research strategies and framework are indicated in this research process from problem formulation to problem validation including all the parameters. It has laid some foundation and how research methodology is devised and framed for researchers. This means, it helps researchers to consider it as one of the samples and models for the research data collection and process from the beginning of the problem statement to the research finding. Especially, this research flow helps new researchers to the research environment and methodology in particular.
There is no “conflict of interest.”
Stability constant of the formation of metal complexes is used to measure interaction strength of reagents. From this process, metal ion and ligand interaction formed the two types of metal complexes; one is supramolecular complexes known as host-guest complexes [1] and the other is anion-containing complexes. In the solution it provides and calculates the required information about the concentration of metal complexes.
Solubility, light, absorption conductance, partitioning behavior, conductance, and chemical reactivity are the complex characteristics which are different from their components. It is determined by various numerical and graphical methods which calculate the equilibrium constants. This is based on or related to a quantity, and this is called the complex formation function.
During the displacement process at the time of metal complex formation, some ions disappear and form a bonding between metal ions and ligands. It may be considered due to displacement of a proton from a ligand species or ions or molecules causing a drop in the pH values of the solution [2]. Irving and Rossotti developed a technique for the calculation of stability constant, and it is called potentiometric technique.
To determine the stability constant, Bjerrum has used a very simple method, and that is metal salt solubility method. For the studies of a larger different variety of polycarboxylic acid-, oxime-, phenol-containing metal complexes, Martel and Calvin used the potentiometric technique for calculating the stability constant. Those ligands [3, 4] which are uncharged are also examined, and their stability constant calculations are determined by the limitations inherent in the ligand solubility method. The limitations of the metal salt solubility method and the result of solubility methods are compared with this. M-L, MLM, and (M3) L are some types of examples of metal-ligand bonding. One thing is common, and that is these entire types metal complexes all have one ligand.
The solubility method can only usefully be applied to studies of such complexes, and it is best applied for ML; in such types of system, only ML is formed. Jacqueline Gonzalez and his co-worker propose to explore the coordination chemistry of calcium complexes. Jacqueline and et al. followed this technique for evaluate the as partial model of the manganese-calcium cluster and spectrophotometric studies of metal complexes, i.e., they were carried calcium(II)-1,4-butanediamine in acetonitrile and calcium(II)-1,2-ethylendiamine, calcium(II)-1,3-propanediamine by them.
Spectrophotometric programming of HypSpec and received data allows the determination of the formation of solubility constants. The logarithmic values, log β110 = 5.25 for calcium(II)-1,3-propanediamine, log β110 = 4.072 for calcium(II)-1,4-butanediamine, and log β110 = 4.69 for calcium(II)-1,2-ethylendiamine, are obtained for the formation constants [5]. The structure of Cimetidine and histamine H2-receptor is a chelating agent. Syed Ahmad Tirmizi has examined Ni(II) cimetidine complex spectrophotometrically and found an absorption peak maximum of 622 nm with respect to different temperatures.
Syed Ahmad Tirmizi have been used to taken 1:2 ratio of metal and cimetidine compound for the formation of metal complex and this satisfied by molar ratio data. The data, 1.40–2.4 × 108, was calculated using the continuous variation method and stability constant at room temperature, and by using the mole ratio method, this value at 40°C was 1.24–2.4 × 108. In the formation of lead(II) metal complexes with 1-(aminomethyl) cyclohexene, Thanavelan et al. found the formation of their binary and ternary complexes. Glycine,
Using the stability constant method, these ternary complexes were found out, and using the parameters such as Δ log K and log X, these ternary complex data were compared with binary complex. The potentiometric technique at room temperature (25°C) was used in the investigation of some binary complex formations by Abdelatty Mohamed Radalla. These binary complexes are formed with 3D transition metal ions like Cu2+, Ni2+, Co2+, and Zn2+ and gallic acid’s importance as a ligand and 0.10 mol dm−3 of NaNO3. Such types of aliphatic dicarboxylic acids are very important biologically. Many acid-base characters and the nature of using metal complexes have been investigated and discussed time to time by researchers [7].
The above acids (gallic and aliphatic dicarboxylic acid) were taken to determine the acidity constants. For the purpose of determining the stability constant, binary and ternary complexes were carried in the aqueous medium using the experimental conditions as stated above. The potentiometric pH-metric titration curves are inferred for the binary complexes and ternary complexes at different ratios, and formation of ternary metal complex formation was in a stepwise manner that provided an easy way to calculate stability constants for the formation of metal complexes.
The values of Δ log K, percentage of relative stabilization (% R. S.), and log X were evaluated and discussed. Now it provides the outline about the various complex species for the formation of different solvents, and using the concentration distribution, these complexes were evaluated and discussed. The conductivity measurements have ascertained for the mode of ternary chelating complexes.
A study by Kathrina and Pekar suggests that pH plays an important role in the formation of metal complexes. When epigallocatechin gallate and gallic acid combine with copper(II) to form metal complexes, the pH changes its speculation. We have been able to determine its pH in frozen and fluid state with the help of multifrequency EPR spectroscopy [8]. With the help of this spectroscopy, it is able to detect that each polyphenol exhibits the formation of three different mononuclear species. If the pH ranges 4–8 for di- or polymeric complex of Cu(II), then it conjectures such metal complexes. It is only at alkaline pH values.
The line width in fluid solutions by molecular motion exhibits an incomplete average of the parameters of anisotropy spin Hamilton. If the complexes are different, then their rotational correlation times for this also vary. The analysis of the LyCEP anisotropy of the fluid solution spectra is performed using the parameters determined by the simulation of the rigid boundary spectra. Its result suggests that pH increases its value by affecting its molecular mass. It is a polyphenol ligand complex with copper, showing the coordination of an increasing number of its molecules or increasing participation of polyphenol dimers used as ligands in the copper coordination region.
The study by Vishenkova and his co-worker [8] provides the investigation of electrochemical properties of triphenylmethane dyes using a voltammetric method with constant-current potential sweep. Malachite green (MG) and basic fuchsin (BF) have been chosen as representatives of the triphenylmethane dyes [9]. The electrochemical behavior of MG and BF on the surface of a mercury film electrode depending on pH, the nature of background electrolyte, and scan rate of potential sweep has been investigated.
Using a voltammetric method with a constant-current potential sweep examines the electrical properties of triphenylmethane dye. In order to find out the solution of MG and BF, certain registration conditions have been prescribed for it, which have proved to be quite useful. The reduction peak for the currents of MG and BF has demonstrated that it increases linearly with respect to their concentration as 9.0 × 10−5–7.0 × 10−3 mol/dm3 for MG and 6.0 × 10−5–8.0 × 10−3 mol/dm3 for BF and correlation coefficients of these values are 0.9987 for MG and 0.9961 for BF [10].
5.0 × 10−5 and 2.0 × 10−5 mol/dm3 are the values used as the detection limit of MG and BF, respectively. Stability constants are a very useful technique whose size is huge. Due to its usefulness, it has acquired an umbrella right in the fields of chemistry, biology, and medicine. No science subject is untouched by this. Stability constants of metal complexes are widely used in the various areas like pharmaceuticals as well as biological processes, separation techniques, analytical processes, etc. In the presented chapter, we have tried to explain this in detail by focusing our attention on the applications and solutions of stability of metal complexes in solution.
Stability or formation or binding constant is the type of equilibrium constant used for the formation of metal complexes in the solution. Acutely, stability constant is applicable to measure the strength of interactions between the ligands and metal ions that are involved in complex formation in the solution [11]. A generally these 1-4 equations are expressed as the following ways:
Thus
K1, K2, K3, … Kn are the equilibrium constants and these are also called stepwise stability constants. The formation of the metal-ligand-n complex may also be expressed as equilibrium constants by the following steps:
The parameters K and β are related together, and these are expressed in the following example:
Now the numerator and denominator are multiplied together with the use of [metal-ligand] [metal-ligand2], and after the rearranging we get the following equation:
Now we expressed it as the following:
From the above relation, it is clear that the overall stability constant βn is equal to the product of the successive (i.e., stepwise) stability constants, K1, K2, K3,…Kn. This in other words means that the value of stability constants for a given complex is actually made up of a number of stepwise stability constants. The term stability is used without qualification to mean that the complex exists under a suitable condition and that it is possible to store the complex for an appreciable amount of time. The term stability is commonly used because coordination compounds are stable in one reagent but dissociate or dissolve in the presence of another regent. It is also possible that the term stability can be referred as an action of heat or light or compound. The stability of complex [13] is expressed qualitatively in terms of thermodynamic stability and kinetic stability.
In a chemical reaction, chemical equilibrium is a state in which the concentration of reactants and products does not change over time. Often this condition occurs when the speed of forward reaction becomes the same as the speed of reverse reaction. It is worth noting that the velocities of the forward and backward reaction are not zero at this stage but are equal.
If hydrogen and iodine are kept together in molecular proportions in a closed process vessel at high temperature (500°C), the following action begins:
In this activity, hydrogen iodide is formed by combining hydrogen and iodine, and the amount of hydrogen iodide increases with time. In contrast to this action, if the pure hydrogen iodide gas is heated to 500°C in the reaction, the compound is dissolved by reverse action, which causes hydrogen iodide to dissolve into hydrogen and iodine, and the ratio of these products increases over time. This is expressed in the following reaction:
For the formation of metal chelates, the thermodynamic technique provides a very significant information. Thermodynamics is a very useful technique in distinguishing between enthalpic effects and entropic effects. The bond strengths are totally effected by enthalpic effect, and this does not make any difference in the whole solution in order/disorder. Based on thermodynamics the chelate effect below can be best explained. The change of standard Gibbs free energy for equilibrium constant is response:
Where:
R = gas constant
T = absolute temperature
At 25°C,
ΔG = (− 5.708 kJ mol−1) · log β.
The enthalpy term creates free energy, i.e.,
For metal complexes, thermodynamic stability and kinetic stability are two interpretations of the stability constant in the solution. If reaction moves from reactants to products, it refers to a change in its energy as shown in the above equation. But for the reactivity, kinetic stability is responsible for this system, and this refers to ligand species [14].
Stable and unstable are thermodynamic terms, while labile and inert are kinetic terms. As a rule of thumb, those complexes which react completely within about 1 minute at 25°C are considered labile, and those complexes which take longer time than this to react are considered inert. [Ni(CN)4]2− is thermodynamically stable but kinetically inert because it rapidly exchanges ligands.
The metal complexes [Co(NH3)6]3+ and such types of other complexes are kinetically inert, but these are thermodynamically unstable. We may expect the complex to decompose in the presence of acid immediately because the complex is thermodynamically unstable. The rate is of the order of 1025 for the decomposition in acidic solution. Hence, it is thermodynamically unstable. However, nothing happens to the complex when it is kept in acidic solution for several days. While considering the stability of a complex, always the condition must be specified. Under what condition, the complex which is stable or unstable must be specified such as acidic and also basic condition, temperature, reactant, etc.
A complex may be stable with respect to a particular condition but with respect to another. In brief, a stable complex need not be inert and similarly, and an unstable complex need not be labile. It is the measure of extent of formation or transformation of complex under a given set of conditions at equilibrium [15].
Thermodynamic stability has an important role in determining the bond strength between metal ligands. Some complexes are stable, but as soon as they are introduced into aqueous solution, it is seen that these complexes have an effect on stability and fall apart. For an example, we take the [Co (SCN)4]2+ complex. The ion bond of this complex is very weak and breaks down quickly to form other compounds. But when [Fe(CN)6]3− is dissolved in water, it does not test Fe3+ by any sensitive reagent, which shows that this complex is more stable in aqueous solution. So it is indicated that thermodynamic stability deals with metal-ligand bond energy, stability constant, and other thermodynamic parameters.
This example also suggests that thermodynamic stability refers to the stability and instability of complexes. The measurement of the extent to which one type of species is converted to another species can be determined by thermodynamic stability until equilibrium is achieved. For example, tetracyanonickelate is a thermodynamically stable and kinetic labile complex. But the example of hexa-amine cobalt(III) cation is just the opposite:
Thermodynamics is used to express the difference between stability and inertia. For the stable complex, large positive free energies have been obtained from ΔG0 reaction. The ΔH0, standard enthalpy change for this reaction, is related to the equilibrium constant, βn, by the well thermodynamic equation:
For similar complexes of various ions of the same charge of a particular transition series and particular ligand, ΔS0 values would not differ substantially, and hence a change in ΔH0 value would be related to change in βn values. So the order of values of ΔH0 is also the order of the βn value.
Kinetic stability is referred to the rate of reaction between the metal ions and ligand proceeds at equilibrium or used for the formation of metal complexes. To take a decision for kinetic stability of any complexes, time is a factor which plays an important role for this. It deals between the rate of reaction and what is the mechanism of this metal complex reaction.
As we discuss above in thermodynamic stability, kinetic stability is referred for the complexes at which complex is inert or labile. The term “inert” was used by Tube for the thermally stable complex and for reactive complexes the term ‘labile’ used [16]. The naturally occurring chlorophyll is the example of polydentate ligand. This complex is extremely inert due to exchange of Mg2+ ion in the aqueous media.
The nature of central atom of metal complexes, dimension, its degree of oxidation, electronic structure of these complexes, and so many other properties of complexes are affected by the stability constant. Some of the following factors described are as follows.
In the coordination chemistry, metal complexes are formed by the interaction between metal ions and ligands. For these type of compounds, metal ions are the coordination center, and the ligand or complexing agents are oriented surrounding it. These metal ions mostly are the transition elements. For the determination of stability constant, some important characteristics of these metal complexes may be as given below.
Ligands are oriented around the central metal ions in the metal complexes. The sizes of these metal ions determine the number of ligand species that will be attached or ordinated (dative covalent) in the bond formation. If the sizes of these metal ions are increased, the stability of coordination compound defiantly decreased. Zn(II) metal ions are the central atoms in their complexes, and due to their lower size (0.74A°) as compared to Cd(II) size (0.97A°), metal ions are formed more stable.
Hence, Al3+ ion has the greatest nuclear charge, but its size is the smallest, and the ion N3− has the smallest nuclear charge, and its size is the largest [17]. Inert atoms like neon do not participate in the formation of the covalent or ionic compound, and these atoms are not included in isoelectronic series; hence, it is not easy to measure the radius of this type of atoms.
The properties of stability depend on the size of the metal ion used in the complexes and the total charge thereon. If the size of these metal ions is small and the total charge is high, then their complexes will be more stable. That is, their ratio will depend on the charge/radius. This can be demonstrated through the following reaction:
An ionic charge is the electric charge of an ion which is formed by the gain (negative charge) or loss (positive charge) of one or more electrons from an atom or group of atoms. If we talk about the stability of the coordination compounds, we find that the total charge of their central metal ions affects their stability, so when we change their charge, their stability in a range of constant can be determined by propagating of error [18]. If the charge of the central metal ion is high and the size is small, the stability of the compound is high:
In general, the most stable coordination bonds can cause smaller and highly charged rations to form more stable coordination compounds.
When an electron pair attracts a central ion toward itself, a strong stability complex is formed, and this is due to electron donation from ligand → metal ion. This donation process is increasing the bond stability of metal complexes exerted the polarizing effect on certain metal ions. Li+, Na+, Mg2+, Ca2+, Al3+, etc. are such type of metal cation which is not able to attract so strongly from a highly electronegative containing stable complexes, and these atoms are O, N, F, Au, Hg, Ag, Pd, Pt, and Pb. Such type of ligands that contains P, S, As, Br and I atom are formed stable complex because these accepts electron from M → π-bonding. Hg2+, Pb2+, Cd2+, and Bi3+ metal ions are also electronegative ions which form insoluble salts of metal sulfide which are insoluble in aqueous medium.
Volatile ligands may be lost at higher temperature. This is exemplified by the loss of water by hydrates and ammonia:
The transformation of certain coordination compounds from one to another is shown as follows:
A ligand is an ion or small molecule that binds to a metal atom (in chemistry) or to a biomolecule (in biochemistry) to form a complex, such as the iron-cyanide coordination complex Prussian blue or the iron-containing blood-protein hemoglobin. The ligands are arranged in spectrochemical series which are based on the order of their field strength. It is not possible to form the entire series by studying complexes with a single metal ion; the series has been developed by overlapping different sequences obtained from spectroscopic studies [19]. The order of common ligands according to their increasing ligand field strength is
The above spectrochemical series help us to for determination of strength of ligands. The left last ligand is as weaker ligand. These weaker ligand cannot forcible binding the 3d electron and resultant outer octahedral complexes formed. It is as-
Increasing the oxidation number the value of Δ increased.
Δ increases from top to bottom.
However, when we consider the metal ion, the following two useful trends are observed:
Δ increases with increasing oxidation number.
Δ increases down a group. For the determination of stability constant, the nature of the ligand plays an important role.
The following factors described the nature of ligands.
The size and charge are two factors that affect the production of metal complexes. The less charges and small sizes of ligands are more favorable for less stable bond formation with metal and ligand. But if this condition just opposite the product of metal and ligand will be a more stable compound. So, less nuclear charge and more size= less stable complex whereas if more nuclear charge and small in size= less stable complex. We take fluoride as an example because due to their smaller size than other halide and their highest electro negativity than the other halides formed more stable complexes. So, fluoride ion complexes are more stable than the other halides:
As compared to S2− ion, O22− ions formed more stable complexes.
It is suggested by Calvin and Wilson that the metal complexes will be more stable if the basic character or strength of ligands is higher. It means that the donating power of ligands to central metal ions is high [20].
It means that the donating power of ligands to central metal ions is high. In the case of complex formation of aliphatic diamines and aromatic diamines, the stable complex is formed by aliphatic diamines, while an unstable coordination complex is formed with aromatic diamines. So, from the above discussion, we find that the stability will be grater if the e-donation power is greater.
Thus it is clear that greater basic power of electron-donating species will form always a stable complex. NH3, CN−, and F− behaved as ligands and formed stable complexes; on the other hand, these are more basic in nature.
We know that if the concentration of coordination group is higher, these coordination compounds will exist in the water as solution. It is noted that greater coordinating tendency show the water molecules than the coordinating group which is originally present. SCN− (thiocynate) ions are present in higher concentration; with the Co2+ metal ion, it formed a blue-colored complex which is stable in state, but on dilution of water medium, a pink color is generated in place of blue, or blue color complex is destroyed by [Co(H2O)6]2+, and now if we added further SCN−, the pink color will not appear:
Now it is clear that H2O and SCN− are in competition for the formation of Co(II) metal-containing complex compound. In the case of tetra-amine cupric sulfate metal complex, ammonia acts as a donor atom or ligand. If the concentration of NH3 is lower in the reaction, copper hydroxide is formed but at higher concentration formed tetra-amine cupric sulfate as in the following reaction:
For a metal ion, chelating ligand is enhanced and affinity it and this is known as chelate effect and compared it with non-chelating and monodentate ligand or the multidentate ligand is acts as chelating agent. Ethylenediamine is a simple chelating agent (Figure 1).
Structure of ethylenediamine.
Due to the bidentate nature of ethylenediamine, it forms two bonds with metal ion or central atom. Water forms a complex with Ni(II) metal ion, but due to its monodentate nature, it is not a chelating ligand (Figures 2 and 3).
Structure of chelating configuration of ethylenediamine ligand.
Structure of chelate with three ethylenediamine ligands.
The dentate cheater of ligand provides bonding strength to the metal ion or central atom, and as the number of dentate increased, the tightness also increased. This phenomenon is known as chelating effect, whereas the formation of metal complexes with these chelating ligands is called chelation:
or
Some factors are of much importance for chelation as follows.
The sizes of the chelating ring are increased as well as the stability of metal complex decreased. According to Schwarzenbach, connecting bridges form the chelating rings. The elongated ring predominates when long bridges connect to the ligand to form a long ring. It is usually observed that an increased a chelate ring size leads to a decrease in complex stability.
He interpreted this statement. The entropy of complex will be change if the size of chelating ring is increased, i.e., second donor atom is allowed by the chelating ring. As the size of chelating ring increased, the stability should be increased with entropy effect. Four-membered ring compounds are unstable, whereas five-membered are more stable. So the chelating ring increased its size and the stability of the formed metal complexes.
The number of chelating rings also decides the stability of complexes. Non-chelating metal compounds are less stable than chelating compounds. These numbers increase the thermodynamic volume, and this is also known as an entropy term. In recent years ligands capable of occupying as many as six coordination positions on a single metal ion have been described. The studies on the formation constants of coordination compounds with these ligands have been reported. The numbers of ligand or chelating agents are affecting the stability of metal complexes so as these numbers go up and down, the stability will also vary with it.
For the Ni(II) complexes with ethylenediamine as chelating agent, its log K1 value is 7.9 and if chelating agents are trine and penten, then the log K1 values are 7.9 and 19.3, respectively. If the metal ion change Zn is used in place of Ni (II), then the values of log K1 for ethylenediamine, trine, and penten are 6.0, 12.1, and 16.2, respectively. The log βMY values of metal ions are given in Table 1.
Metal ion | log βMY (25°C, I = 0.1 M) |
---|---|
Ca2+ | 11.2 |
Cu2+ | 19.8 |
Fe3+ | 24.9 |
Metal ion vs. log βMY values.
Ni(NH3)62+ is an octahedral metal complex, and at 25 °C its log β6 value is 8.3, but Ni(ethylenediamine)32+ complex is also octahedral in geometry, with 18.4 as the value of log β6. The calculated stability value of Ni(ethylenediamine)32+ 1010 times is more stable because three rings are formed as chelating rings by ethylenediamine as compared to no such ring is formed. Ethylenediaminetetraacetate (EDTA) is a hexadentate ligand that usually formed stable metal complexes due to its chelating power.
A special effect in molecules is when the atoms occupy space. This is called steric effect. Energy is needed to bring these atoms closer to each other. These electrons run away from near atoms. There can be many ways of generating it. We know the repulsion between valence electrons as the steric effect which increases the energy of the current system [21]. Favorable or unfavorable any response is created.
For example, if the static effect is greater than that of a product in a metal complex formation process, then the static increase would favor this reaction. But if the case is opposite, the skepticism will be toward retardation.
This effect will mainly depend on the conformational states, and the minimum steric interaction theory can also be considered. The effect of secondary steric is seen on receptor binding produced by an alternative such as:
Reduced access to a critical group.
Stick barrier.
Electronic resonance substitution bond by repulsion.
Population of a conformer changes due to active shielding effect.
The macrocyclic effect is exactly like the image of the chelate effect. It means the principle of both is the same. But the macrocyclic effect suggests cyclic deformation of the ligand. Macrocyclic ligands are more tainted than chelating agents. Rather, their compounds are more stable due to their cyclically constrained constriction. It requires some entropy in the body to react with the metal ion. For example, for a tetradentate cyclic ligand, we can use heme-B which forms a metal complex using Fe+2 ions in biological systems (Figure 4).
Structure of hemoglobin is the biological complex compound which contains Fe(II) metal ion.
The n-dentate chelating agents play an important role for the formation of more stable metal complexes as compared to n-unidentate ligands. But the n-dentate macrocyclic ligand gives more stable environment in the metal complexes as compared to open-chain ligands. This change is very favorable for entropy (ΔS) and enthalpy (ΔH) change.
There are so many parameters to determination of formation constants or stability constant in solution for all types of chelating agents. These numerous parameters or techniques are refractive index, conductance, temperature, distribution coefficients, refractive index, nuclear magnetic resonance volume changes, and optical activity.
Solubility products are helpful and used for the insoluble salt that metal ions formed and complexes which are also formed by metal ions and are more soluble. The formation constant is observed in presence of donor atoms by measuring increased solubility.
To determine the solubility constant, it involves the distribution of the ligands or any complex species; metal ions are present in two immiscible solvents like water and carbon tetrachloride, benzene, etc.
In this method metal ions or ligands are present in solution and on exchanger. A solid polymers containing with positive and negative ions are ion exchange resins. These are insoluble in nature. This technique is helpful to determine the metal ions in resin phase, liquid phase, or even in radioactive metal. This method is also helpful to determine the polarizing effect of metal ions on the stability of ligands like Cu(II) and Zn(II) with amino acid complex formation.
At the equilibrium free metal and ions are present in the solution, and using the different electrometric techniques as described determines its stability constant.
This method is based upon the titration method or follows its principle. A stranded acid-base solution used as titrate and which is titrated, it may be strong base or strong acid follows as potentiometrically. The concentration of solution using 103− M does not decomposed during the reaction process, and this method is useful for protonated and nonprotonated ligands.
This is the graphic method used to determine the stability constant in producing metal complex formation by plotting a polarograph between the absences of substances and the presence of substances. During the complex formation, the presence of metal ions produced a shift in the half-wave potential in the solution.
If a complex is relatively slow to form and also decomposes at measurable rate, it is possible, in favorable situations, to determine the equilibrium constant.
This involves the study of the equilibrium constant of slow complex formation reactions. The use of tracer technique is extremely useful for determining the concentrations of dissociation products of the coordination compound.
This method is based on the study of the effect of an equilibrium concentration of some ions on the function at a definite organ of a living organism. The equilibrium concentration of the ion studied may be determined by the action of this organ in systems with complex formation.
The solution of 25 ml is adopted by preparing at the 1.0 × 10−5 M ligand or 1.0 × 10−5 M concentration and 1.0 × 10−5 M for the metal ion:
The solutions containing the metal ions were considered both at a pH sufficiently high to give almost complete complexation and at a pH value selected in order to obtain an equilibrium system of ligand and complexes.
In order to avoid modification of the spectral behavior of the ligand due to pH variations, it has been verified that the range of pH considered in all cases does not affect absorbance values. Use the collected pH values adopted for the determinations as well as selected wavelengths. The ionic strengths calculated from the composition of solutions allowed activity coefficient corrections. Absorbance values were determined at wavelengths in the range 430–700 nm, every 2 nm.
For a successive metal complex formation, use this method. If ligand is protonate and the produced complex has maximum number of donate atoms of ligands, a selective light is absorbed by this complex, while for determination of stability constant, it is just known about the composition of formed species.
Bjerrum (1941) used the method stepwise addition of the ligands to coordination sphere for the formation of complex. So, complex metal–ligand-n forms as the following steps [22]. The equilibrium constants, K1, K2, K3, … Kn are called stepwise stability constants. The formation of the complex metal-ligandn may also be expressed by the following steps and equilibrium constants.
Where:
M = central metal cation
L = monodentate ligand
N = maximum coordination number for the metal ion M for the ligand
If a complex ion is slow to reach equilibrium, it is often possible to apply the method of isotopic dilution to determine the equilibrium concentration of one or more of the species. Most often radioactive isotopes are used.
This method was extensively used by Werner and others to study metal complexes. In the case of a series of complexes of Co(III) and Pt(IV), Werner assigned the correct formulae on the basis of their molar conductance values measured in freshly prepared dilute solutions. In some cases, the conductance of the solution increased with time due to a chemical change, e.g.,
It is concluded that the information presented is very important to determine the stability constant of the ligand metal complexes. Some methods like spectrophotometric method, Bjerrum’s method, distribution method, ion exchange method, electrometric techniques, and potentiometric method have a huge contribution in quantitative analysis by easily finding the stability constants of metal complexes in aqueous solutions.
All the authors thank the Library of University of Delhi for reference books, journals, etc. which helped us a lot in reviewing the chapter.
Open Access publishing helps remove barriers and allows everyone to access valuable information, but article and book processing charges also exclude talented authors and editors who can’t afford to pay. The goal of our Women in Science program is to charge zero APCs, so none of our authors or editors have to pay for publication.
",metaTitle:"What Does It Cost?",metaDescription:"Open Access publishing helps remove barriers and allows everyone to access valuable information, but article and book processing charges also exclude talented authors and editors who can’t afford to pay. The goal of our Women in Science program is to charge zero APCs, so none of our authors or editors have to pay for publication.",metaKeywords:null,canonicalURL:null,contentRaw:'[{"type":"htmlEditorComponent","content":"We are currently in the process of collecting sponsorship. If you have any ideas or would like to help sponsor this ambitious program, we’d love to hear from you. Contact us at info@intechopen.com.
\\n\\nAll of our IntechOpen sponsors are in good company! The research in past IntechOpen books and chapters have been funded by:
\\n\\nWe are currently in the process of collecting sponsorship. If you have any ideas or would like to help sponsor this ambitious program, we’d love to hear from you. Contact us at info@intechopen.com.
\n\nAll of our IntechOpen sponsors are in good company! The research in past IntechOpen books and chapters have been funded by:
\n\n