Chapters authored
Development of Clay Plasters Containing Thermoregulating Microcapsules for Indoor Walls
This work shows the technical feasibility of incorporating phase change materials (PCMs) into clay plastering mortars to improve the thermal properties of the building envelopes. Due to the absence of regulated and internationally agreed-upon norms for clay mortars containing thermoregulating microcapsules (MPCMs), two tests following UNE-EN-998-1:2010 and UNE-EN-1015, were designed to provide the greatest similarity to its final application. Three different dosages 5, 10, and 15 wt% of MPCM relative to the dried mortar weight were used. Fresh mortars were physically characterized to determine its consistency, apparent density, period of workability and open time, and occluded air content. Physical and mechanical characteristics were determined for hardened mortar. The thermal characteristics of the specimens were analysed by using a differential scanning calorimetry, obtaining their apparent specific heat capacities and the enthalpy curves. Building simulation software is a fundamental tool for designing buildings with almost zero energy consumption. In this study, three identical architectural models were simulated. The reference building had inner coatings of clay-based mortar, mortar with 15% added material, and a conventional gypsum mortar. These buildings were subjected to the same exposure and radiation conditions, which allowed the result to be compared to evaluate the effect of incorporating the PCM.
Part of the book: Sustainable Buildings