Chapters authored
Fuzzy Adaptive Setpoint Weighting Controller for WirelessHART Networked Control Systems
Gain range limitation of conventional proportional‐integral‐derivative (PID) controllers has made them unsuitable for application in a delayed environment. These controllers are also not suitable for use in a Wireless Highway Addressable Remote Transducer (WirelessHART) protocol networked control setup. This is due to stochastic network‐induced delay and uncertainties such as packet dropout. The use of setpoint weighting strategy has been proposed to improve the performance of the PID in such environments. However, the stochastic delay still makes it difficult to achieve optimal performance. This chapter proposes an adaptation to the setpoint weighting technique. The proposed approach will be used to adapt the setpoint weighting structure to variation in WirelessHART network‐induced delay through fuzzy inference. Result comparison of the proposed approach with both setpoint weighting and proportional‐integral (PI) control strategy shows improved setpoint tracking and load regulation. For the first‐, second‐ and third‐order systems considered, analysis of the results in the time domain shows that in terms of overshoot, undershoot, rise time, and settling times, the proposed approach outperforms both the setpoint weighting and the PI controller. The approach also shows faster recovery from disturbance effect.
Part of the book: Wireless Sensor Networks