The categories of deforestation.
\r\n\tWithin this scenario, special attention needs to be devoted to financial implications, due to their pervasiveness. Nobody would question the key role that finance plays to complement the real sphere of the economy and that has increasingly attracted both academics and practitioners. As a result, traditional pillars – such as financial markets, products, and institutions – have evolved significantly, with financial innovation fueling further progress over time. The global side of the coin features – among others – financially connected markets, international financial exchanges, and financial conglomerates that provide valuable opportunities in terms of international corporate finance. On the other side, recent advances have involved a wider recourse to ESG factors, allowed forward steps towards a more inclusive financial system, and have made digital finance a must, rather than an option, even though much remains to be accomplished, for instance, to facilitate access to formal financial channels in many underdeveloped regions.
\r\n\r\n\t
\r\n\tThis book aims to examine emerging trends, new perspectives, and empirical applications that deal with globalization and sustainability. The goal is to provide a comprehensive overview of these important concepts as valuable support to successfully meet the challenges and take on the opportunities ahead. At the same time, drawing upon empirical evidence can contribute to bridging the gap between theory and practice, which also fits within the scope of this book.
Trees play a very pivotal role in the lives of both human beings and animals. Particularly, to human beings, trees plays a huge role. Trees takes up carbon dioxide and make use of it to produce the oxygen needed by human beings [1]. Not only that, trees are a source of food, medicine, shade and supports biodiversity. Moreover, trees provide the wood we need to make papers, furniture and shelter. Trees also helps control temperatures, reduces soil erosion as well as soil salinity [2]. Significantly, trees remain the source of and provides food. Shade, medicine, and enhancement of biodiversity is realized from trees [1]. Therefore, it is beyond any shadow of doubt that trees are important for human life to be sustained. However, there is an ever-growing challenge across the world. The challenge attributed to, is the clearing of our forests for some reasons. Human settlement, construction of roads, and medicinal extraction as well as agricultural purposes are some reasons, among others, that lead to clearing of our forests.
A forest is an enormous area that is covered with trees and vegetation, which is also known as undergrowth [3]. It is also regarded as a very multifaceted ecosystem dominated with trees that safeguards the earth and also support a myriad of life forms [4]. Trees are very much important as far as environmental components is concerned. This is mainly because of the very benefits of trees on the myriad of life forms it supports. In as much as a forest is of great importance to life, there are two processes which determines its existence. That is the processes of afforestation and deforestation. Afforestation is defined in simple terms as a process of planting trees in a particular land [5]. This promotes vegetation and canopy for soil protection and leads to the balance of the ecosystem. Afforestation is a method sought, so incredible, by humankind, in the quest to fighting the effects of climate change, dealing with issues of soil degradation and maintenance of soil organic carbon levels [6]. This is on technique of humankind to prevent desertification.
On the other hand, deforestation as defined by [1], is the clearing of trees in forests. Significantly, deforestation can be traced to manmade and natural processes. The natural process of deforestation includes: plant diseases, damage of trees by other plants, damage of trees by animals feeding or habiting on the trees, storms and wind, as well as other climatic conditions such as flood and veld fires [4, 7, 8]. While manmade processes involves: construction developments, agricultural engagements, and clearing of trees for medicinal purposes and usages [9]. It is furthermore, of paramount importance to note that deforestation is the major and lead factor to climate change. Climate change refers to the alterations of climatic patterns regionally as well as worldwide [10]. Deforestation comes with a number of consequences. During the clearing the forests, good and developmental cost can be tabled. However, the cost and consequences of deforestation are punitive to both human kind and animals (both aquatic and wildlife).
The rationale for deforestation are highlighted and it includes: soil degradation, increased chances and levels of soil erosion, increase in the reflected radiation of solar, increase in the migration of animal species in search for habitat and greener pastures, and increased economic instability [1, 2, 8]. Moreover, it is evident from research that the increase in the rate at which population grows as well as the changes in the ways and technologies of cultivation are the primary reasons of deforestation [11]. This research facts points to us the danger that continues to loom around the myriad of life forms. Therefore, the task of preaching the importance and practice of sustainable development remain pivotal. Hence, this chapter, draws on the meaning of deforestation, shades light on the rationale and consequences of deforestation.
The conversion of forested areas into permanent non-forest areas and lands is known as deforestation [6]. Deforestation is defined also as a process of shrinking the areas of tropical forests for agricultural, grazing and construction purposes [4]. Other authors have presented some more definitions of deforestation. Tariq and Aziz [1] opined that deforestation is the degradation of the environment that threatens the quality of the existing forests. Notably, deforestation can be intentional and non-intentional clearing of the existing forests, through human activities [3, 12]. These land use changes come with enormous economic benefits for improved livelihoods across the world [13]. However, these benefits, could only be sustainable with good forest management practices [1, 6]. Therefore, it is important to create sustainable use of forest resources across the world, for sustainable development.
Deforestation involves the process of reducing vegetal cover in the forest’s lands. This reduction of vegetation can either be man-made or be naturally enforced [14]. Deforestation occurs because of natural phenomenon such as wind and storm, veld fire and plant diseases. Moreover, deforestation comes in two groups, that is: 1) the change in land use and 2) the change in the land cover [3, 8]. These two groups can then be described as the categories of deforestation. Therefore, the Table 1, below, shows the examples of the two categories of deforestation:
Categories of deforestation | |
---|---|
Change in land use (man-made) | Change in land cover (man-made) |
Alteration of forest land for agricultural purposes (ranching and farming activities). | Clearing of trees for firewood and charcoal production |
Alteration of forest lands for mining purposes (mining of underground minerals, timber mining and stone mining) | Clearing of trees for logging |
Alteration of forest lands for areas of settlement (formal and informal settlement) | Clearing of trees for medicinal purposes (both authorized and non-authorized persons) |
Alteration of forest lands for road construction and industrialization | Loss of trees, plants and grasses due to veld fires |
The categories of deforestation.
Pareta and Pareta [12] argued that deforestation is the wasting of existing forests vegetation and resources. Vegetation refers to all characteristics of plant cover in an area. Therefore, deforestation is the process of engaging in removing and reducing vegetation in the existing forest. The resources involve: stable soils, wildlife, balanced biodiversity, wildlife habitats, air and clean water. Significantly, in the process of clearing forests, humankind deprive themselves the wonderful God-given resource that is the beauty of the environment [14]. Of which, if it is taken care of, it offers great opportunities for recreation and tourism [6]. Recreation and tourism can be of economic importance as far as livelihood is concerned. Therefore, it is certain that the use of forest resources must be accompanied with sustainable use of readily available resources, for the betterment of the livelihoods of the current generation, without compromising the future generation.
In the quest for the betterment of the current generation’s livelihood, mankind exploits the readily available resources. In as much as powerful and convincing reasons can be tabulated, it remains a fact that most of the activities of mankind are in a way leading to more environmental problems. Hence, some authors came up with some definitions of deforestation in relation to human activities: As the alteration of afforested lands to non-forested lands which can be intentional and non-intentional [15]. Some of the activities of humankind that leads to deforestation are reflected in Table 1 above. Significantly, the clearing of trees in the existing forests for commercial usage is entails deforestation. Commercial usages of the tree materials collected from the forest includes: firewood harvesting, production of charcoal, mining of timber, logging, hunting, tourism and agricultural activities [1, 2, 3, 6].
On the other hand, [9] consider deforestation as the clearing of a significant number of trees in a forestland. Particularly, in the context of human activities as compared to natural causes. Deforestation is the process of degrading trees in the forest by human activities. Notably, the collection of all unsustainable forestry practices, such as use of firewood and timber, and these practices neglect the principle of enduring development which involves the sustainable use of resources while ensuring that the needs of the future generations are not compromised [16]. Human, also cause reduction in forest resources through clearing all vegetation from the existing forestlands without recognizing the need of environmental conservation [17].
Furthermore, human activities transcends the cutting down of trees to mining, logging, agriculture, human habitation, and industrialization [7, 8, 18]. Therefore, deforestation is anti-livelihoods support and development. Afforestation is the only way out of the devastating consequences of deforestation, backed with implementation of policies on afforestation. As a matter of fact, if trees are extinct, then human and animal life itself is endangered and destroyed.
Human and animal life is encored and supported by plant life and the shortage of trees, will result to inadequate supply of woods for shelter, furniture, and the paper products used today [2, 3, 4, 19]. Furthermore, the availability and flow of oxygen is dependent on vegetation used to sustain human life. Therefore, understanding what deforestation is, becomes of paramount importance. Hence, [6, 7, 8, 9, 16] examined deforestation as the clearing of trees from the existing forest lands due to bad agricultural practices, lumbering activities, change in climatic patterns, urbanization, air pollution, tourism, and overgrazing. On the other hand, [2, 3, 4] submits that the destruction of vegetation cover in the existing forestlands is referred to as deforestation. While [6, 7, 8] delineates deforestation to be the quest for economic productivity through agricultural endeavors, mining, and urbanization leading to land degradation. Therefore, it is clearer and undisputable, that the standing delineation of deforestation in the context of manmade processes is that deforestation is the cutting down of a huge number of trees leading to clearing of the existing forests for the purpose of livelihood betterment while compromising the future generations, by avoiding replenishing the cleared forests in ignorance or intentionally.
Numerous studies, [1, 2, 3, 4, 9, 13] indicated the flux inherent in environmental deforestation. Nevertheless, increases in environmental awareness and activism across the world, on deforestation have also been reported to be on the increase as well. Therefore, there is a need to create continuous awareness campaign of deforestation. Significantly, deforestation is traceable to the following reasons: Change in ways of farming, intensified ranching and overgrazing, tourism, urbanization, wars and military affairs, mining, population growth (overpopulation), medicinal purposes, undervaluing forestry, logging, firewood harvesting and charcoal production, policy failure, poor land-use planning, damage of trees and plants by mammals, damage of trees by other plants, death and decay of trees, wind and storms, and veld fires [1, 2, 3, 4, 5, 6, 7, 8, 9, 13, 20].
The rationale for deforestation as shown on Figure 1 below, occur in two broad categories: the intentional and the non-intentional. Intentional deforestation involves the human activities resulting to deforestation. It encompasses all the processes and activities that humankind engaged in without careful and sustainably approach to protect the environment. For example, clearing forest lands for agricultural purposes, mining, and industrialization. This is an intentional approach to deforestation, since, there are no careful considerations towards afforestation.
Schematic illustration of deforestation.
Agriculture is one of the major drivers of deforestation [12]. On the other hand, the agricultural sector is one of the major contributors towards economic growth and it employs most of the rural people [1]. As for employment and wealth creation, 60% of the world’s population depend on the agricultural sector [8]. However, agricultural activities contributes 60% of deforestation worldwide [13]. Gorte and Sheikh [20] argued that agricultural activities leading to massive deforestation is mostly associated with cultivation shifts. This happens when a forest is cleared by means of burning trees and cutting down trees so to avail space for cultivation. Agricultural activities varies from nation to nation, but it occurs at three levels, namely: commercial, small-scale and subsistence farming levels [1, 2]. Moreover, agriculture is known to contribute 12% of towards the greenhouse gas emissions worldwide [6]. This mainly happens when the forest is burnt down for agricultural purposes as well as when farm implements are in use [4].
On the other hand, logging and mining are reported to be other reasons of deforestation. Logging is the commercial clearing of forest by cutting trees down for the purpose of making paper [13]. While mining involves all activities whereby minerals are extracted either from the ground or forest. Mining in forest clearing happens when people are mining timber for construction and paper making. However, mining also happens in terms of underground minerals mining, such includes mining of gold, iron ore, coal, diamond and oil [1, 2, 3]. Moreover, mining of stone and sand does happen from the surface of the earth. Particularly, trees are cleared to give space for sand and stone mining. Logging is one of the economic growth contributors, globally. However, unsustainable commercial logging, results in deforestation. Pareta and Pareta [12] argued that logging is not the cause of deforestation. On the contrary, [3] argued that logging practiced in an unsustainable way is a direct cause of deforestation. Therefore, sustainable extraction of wood form the forests is to be practiced.
Population growth increases urbanization and rural settlement, and there are activities that creates ever-growing demands for space in the environment [1]. In the quest for human settlement, industrialization, employment, and wealth creation, causes deforestation to occur [20]. Urbanization is a necessity for development. However, it must follow a planned, managed and controlled manner [18]. On the other hand, tourism sites are preferred for recreation and wealth creation [2]. However, if unsustainable practices are employed, that will result in massive vegetation cover loss [1, 2, 20]. Therefore, it is an undisputable fact that urbanization and tourism are key role players in economic growth and development. Hence, urbanization and tourism must be done with careful planning, management and control.
Firewood and charcoal production is reported by [1] to be among the main drivers of deforestation, globally. Firewood harvesting is one of the reasons of deforestation that needs to be governed. As a matter of fact, [7] reported that their study found that 90% of the respondents in their study, uses firewood for cooking. This follows findings by [1], that there is a cumulative demand of firewood and timber for domestic use as the populations of nations continues to grow. This further leaves the tress at mercy of the ever-growing population. Kissinger et al. [15], asserted that timber accounts for almost 70% of deforestation, globally. The timber collected is then used for both firewood and charcoal production. However, the major drivers of deforestation includes: firewood harvesting, charcoal production and overgrazing of livestock [2].
Timber is, significantly, needed and utilized almost by everyone in construction of shelter. While firewood and charcoal is used for cooking and warming in winter season [15, 16]. Considering the human demand on forest and forestry products, the enactment of policies to govern the harvesting of timber becomes critical. More so, to create an awareness about the impact of deforestation and the apparent need for forest conservation.
Another reason for deforestation is the uncontrolled cutting down of trees and shrubs for medicinal purposes [1]. In this case, trees and plants with medicinal benefits are destroyed. Notably, this action does not only result in deforestation, but it also endangers the environment for human habitation. In most instances, trees are used for medicinal purposes by villagers and people surrounding forestlands. While others sell herbs obtained from the forest for income generation.
As illustrated in Figure 1, above, deforestation also is as a result of non-intentional activities and processes. These processes and activities involves both natural and man-made activities and processes. Natural processes leading to non-intended deforestation involves: death and decay of trees and plants, plant diseases, landslides, damage of trees by other plants, high infestation of pests as well as climatic conditions such as veld fires, floods, and winds and storms [2, 3, 4]. On the other hand, man-made processes and activities involves: uncontrolled grazing which leads to overgrazing, hunting as well as controlled forest burning [4, 5, 9]. Therefore, this section examines the natural and manmade processes and activities leading to deforestation at a non-intended approach.
Climatic conditions and landslides causes serious environmental damage to lands used for forestry and agricultural activities. The massive environmental harm comes in the form of deforestation and land degradation [13]. Climate change is one of the environmental issues across the whole world. Significantly, climatic conditions and climate change are both regarded as the drivers and the effect of deforestation and degradation of forests. As drivers of deforestation, climatic conditions are recognized in the form of tropical storms and winds, floods, ice, droughts, heat waves and veld fires [4, 7, 8]. On the other hand, landslides refers to mass wasting. Mass wasting is an occurrence of the movements of mass rocks, debris and earth downslope. This occur in five forms, namely: falls, topples, slides, spreads and flows. As a result of this phenomenon, destruction of forests occurs as well. Hence, landslides and climatic conditions are both drivers of deforestation across the world.
Deforestation occur as a result of unavoidable death and decay of trees and plants, plant diseases, high infestation of pests, damage of trees by other plants in the forestlands [8, 13, 14, 15, 16]. With robust attention and huge budgets given to plant protection in the agricultural sector [7, 20]. Therefore, the lack of forest management policies, inadequate and ineffective management of the existing forests puts our existing forests at a risk of deforestation.
These are human activities resulting in unintended deforestation. These include uncontrolled grazing resulting in overgrazing, uncontrolled forest burning and hunting [20]. Hunting is one of the means of livelihood, particularly, for rural communities. In as much as hunting, poaching and snaring provides rural people with food harvested from wildlife, in terms of bush meat, it remains a factor causing deforestation [16, 20]. Hunters cut down trees in the forests to setup traps and this traps and snares are sometimes made on living plants and trees [21]. Furthermore, the traps set on living trees, then causes damage which can result in death and decay of the affected tress in the forest.
Human activities tend to justify deforestation as good actions because it support livelihoods. However, as depicted on Figure 2, below, deforestation comes with its attendant environmental and socio-economic consequences. The rationale for deforestation includes: shortages of food, shortages of wood, mass destruction of wildlife and high wildlife migration rate, alteration of vegetation cover and structure, damage and loss of flora and fauna essential for recreation and tourism, desertification, disturbed water cycle, soil erosion, flooding, landslides, and land degradation, reduced atmospheric moisture, destruction of biodiversity, hardening of iron-rich soils to form laterite, changes and imbalances in nutrient cycle and energy, declined pollination, increased poverty levels, decline in soil fertility, decline of medicinal herbs production, decline in income generation, water loss as well as loss of natural flood and erosion control [2, 3, 4, 5, 6, 7, 22]. All these activities contribute to deforestation.
Impact of deforestation.
As shown in the Figure 2, below, deforestation have a number of environmental impact. These are: loss of biodiversity, mass destruction of wildlife and high rate of wildlife migration, alteration in the composition and structure of vegetation, damage of flora and fauna, desertification, soil erosion, flooding and the hardening of iron-rich soils to form laterite.
Biodiversity refers to all the desirable and important variety of animal and plant life in a habitat. The variety of animal and plant life is also referred to as the fauna and flora. Biodiversity is also known as the foundation of the ecosystems linked to humankind [9, 20]. Furthermore, within an ecosystem, there are wide range of animals and plants that supports production of biomass, water and nutrient cycle and energy, as well as soil formation and maintenance [7, 16]. However, deforestation and the degradation of forests destroys the biodiversity. When the biodiversity is destroyed, animals may migrate while some animal species may be extinct.
Significantly, the loss of biodiversity, because of deforestation have harsh impact particularly, on human health. This is due to the fact that biodiversity supports and benefits human life in many different ways [16]. Conservation of nature, is therefore, threatened by the destruction of biodiversity [8]. Which also leads to human-animal conflict. Human-animal conflict happens due to the declines in the agricultural productivity. These decline in agricultural productivity results from the effects of climate change which resulted from deforestation [23]. Thus, hunting, poaching and snaring becomes the way out of poverty for many rural people. Therefore, conservation approaches must be considered so to conserve the biodiversity that supports our health system and human existence.
Forests are not only the source of wood, but are important for human life support [15]. The trees growing in the forests make use of the carbon dioxide to produce the oxygen we need to sustain life [1]. In as much as trees are beneficial to human life, there is an ongoing threat to forest and plant life. This is because of all the natural and man-made processes resulting in deforestation. Deforestation has the ability to disrupt the normal weather conditions and create extremely hot and drier weather conditions [17]. Hence, it is believed that deforestation leads to the change in climate. Climate change manifest in increased temperatures, increased drought and prolonged drought seasons, delayed rain seasons, floods and displacement of vegetation cover, very heavy winds, and tropical storms [2, 3, 4, 16]. All these changes in climatic conditions have serious implications on human and animal life. The imbalances of the atmospheric nutrient cycle, reduction of atmospheric moisture, increase in the high concentrations of Chloro-Floro Carbons (CFSs) in the atmosphere [4]. All these are results of deforestation and have serious implications on human health and existence. Therefore, deforestation is not only a theoretical concept, but a reality with detrimental impact to human health and life. Hence, measures to replenish our existing forests are critical to be implemented with careful consideration for sustainable development.
As shown in the Figure 2, above, deforestation have a number of socio-economic consequences. These are: shortages of food, shortages of wood, increased levels of poverty, decline in soil fertility, loss of medicinal therapies, loss of valuable agricultural land, water loss and, inadequate income. These consequences are intertwined with sustainable development. In most communities, forest is valued to an extent that, its destruction amounts to the destruction of their values, beliefs, norms and cultures [4]. This further shows that deforestation is not only an environmental issue but is a social and economic issue. Deforestation result in shortages of woods [21]. Woods from the forests are used for different purposes which includes making and production of paper, making of furniture, construction as well as firewood and charcoal production.
However, sustainable management of our existing forests will ensure that we do not run short of wood. Significantly, [1] presents that deforestation results in decline of soil fertility. However, land degradation because of deforestation render the soil infertile. Furthermore, decline in soil fertility leads to failure in agricultural productivity. And poor agricultural productivity means that we are unable to produce adequate and quality food [24]. This then result in food shortages. Food shortages at the extreme leads to food insecurity which is linked with many heath issues. Therefore, conservation of natural resources is necessary for economic and social needs of communities.
Daramola et al. [24] defines sustainable development as a process of economic development that does not compromise the future generations but conserves the natural resources for them. Murphy [22] suggests that the development that satisfies the needs of the current generation, no depriving the future generations the ability to satisfy their needs is sustainable development. Sustainable development is mostly known for its three (3) pillars, namely: social, environmental and economic sustainability [2, 22, 23, 24]. This means that any development happening, must be economic equitability, it must be socially bearable, and environmental viability (Figure 3).
Pillars of sustainable development (SD).
Therefore, sustainable development aims to promoting conservation of nature and all natural resources for the use by future generations. However, Figure 2, reveals that deforestation, as one of the environmental issues, globally, and hinders the achievement of sustainable development objectives.
Deforestation result from human activities in the environment. It may be unexpected, and sometimes deliberate action supported by livelihood needs. The concepts and dimensions of deforestation, human activities in relation to deforestation, the rationale for deforestation, environmental dimension to deforestation and contributions of forest and forest by products to livelihoods were examined in this chapter. The authors segmented cases and experiences and, highlighted efforts to create awareness on the need to discourage deforestation. Nevertheless, forest remain an important pool of biodiversity and deforestation must be avoided. The chapter conclude that awareness of the impact of deforestation should be supported by policies. Therefore, it is the authors believe that policy discourse will assist to provide enduring forest conservation and management.
The authors declare no interest.
In recent years, various methods for sheet metal deformation have been developed including incremental sheet metal forming (ISMF). ISMF has been bringing about many effects for small series production and in rapid prototyping of products. ISMF now becomes the leading research and development (R&D) topics in the manufacturing industry. ISMF is a sheet deformation method that uses simple settings: the deformation tool is a spherical round cylinder without a blade, and the metal sheet is fastened on a support to allow the sheet to deform according to the supported mold. The supported mold can be made of simple materials such as wood, plastic, composite, and so on, so that there is no need for expensive specialized molds. To receive tool paths for a complex shape, the CAD 3-D model of the finished part must be designed. The 3D model will be transferred to the CAM environment to simulate a reasonable tool path. Depending on the shape and complexity of the forming part, the machining process may or may not need a support mold. Table 1 lists the practical applications of the ISMF method that has been manufactured in different countries around the world. Figure 1 illustrates the rapid prototyping products of this technology [1].
\nAutomotive cover panels | \n
Other chassis sheet metal parts of an automobile | \n
Sculpture, architecture, decoration | \n
Required shape by customers | \n
Cover for lighting equipment | \n
Dental, medical | \n
Special parts for aerospace and aviation | \n
Small ship body panels | \n
Potential application areas for ISMF [1].
Rapid prototyping products from ISMF: (a) dental, (b) medical, (c) headlight, (d) sculpture, (e) automotive cover.
ISMF processing is a continuous forming process until plastic deformation occurs locally in a small area beneath the forming tool. The deformed shape is a combination of forming movements in the local plastic deformation region. The deformation process is slow and time-consuming, so it is only suitable for rapid prototyping of products or in series production. However, this method allows for greater formability than conventional deformation methods of material sheet. Forming tools are simple and inexpensive and develop products in a short time.
\nThis method contains new and creative contributions in sheet metal forming such as:
A new type of tool path generation in ISMF to create complex surfaces
Improving the formability of sheet metal when comparing to the traditional forming process
ISMF is an innovative process for manufacturing sheet metal products by numerical control machines (CNC) based on simple forming tools for plasticity deformation to form metal sheets according to the desired shape. The controllable motion of the forming tool allows deforming three-dimensional profiles. This forming method offers many advantages in rapid prototyping of sheet metal products, which were directly constructed from CAD 3-D models to a complete traditional product without middle stages for designing and manufacturing molds. There are two main deformations of ISMF according to concave surfaces (Figure 2a) and convex surfaces (Figure 2b). They show the workpiece surface where the tool is shaping motion. The actual experimental setup used in ISMF is shown in Figure 3. The forming limit curve (FLC) of ISMF process is much higher than the forming limits calculated from the theory of plasticity as well as obtained from traditional test [2]. The forming limit curve from conventional deformations is V-shaped. But, recently studies have shown that ISMF process achieved greater formability and FLC shape almost like a straight line with negative slope in the principal limit strains (major strain, ε1, and minor strain, ε2). In order to estimate the forming limit curve at fracture (FLCF) in ISMF for a cold rolled, Nguyen et al. [3] proposed the combination method for predicting FLC based on in-plane test (M-K model) and ductile fracture criterion of Clift et al. [4]. In the previous study [5], cold rolled steel sheet improved formability by ISMF process and is also used to manufacture automotive structure [6] as shown in Figure 4. In ISMF process, the effects of parameters such as size-step, tool-down step, tool radius, etc. on formability are very important. The influences of the main material parameters of the sheet material on the formability of ISMF had been studied in several published papers. In order to demonstrate the formability improvement for sheet metal by ISMF process using rotational tool (RISF), both empirical and simulation studies [7, 8] have been carried out for a magnesium sheet alloy. They concluded that heat generation in the contact zone between forming tool and metal sheet would affect formability of light alloy sheet materials such as titanium and magnesium alloy. With light alloy structures, titanium alloy and magnesium alloy have many advantages when compared to steel, cast metal, and aluminum alloy. However, the structure of titanium and magnesium alloys is limited by the formability at room temperature due to the tightly packed hexagonal structure. In order to apply these light alloys widely in industry, many studies have investigated the ability of these alloys to form at elevated temperatures and concluded that magnesium and titanium alloys have the best formability in the temperature range of 200–800°C by experiments and corresponding simulations as shown in Figures 5 and 6, respectively.
\nForming concave surface (a) and convex surface (b).
ISMF experimental setup: lower mold, clamping, metal sheet and forming tool.
Incremental sheet forming for automobile shape [
When the mold has a convex surface shape, the forming device must be equipped with a hydraulic clamping system to hold the metal sheet firmly in the proper working position. In the case of concave molded surfaces, metal plates can be fixed on the clamping system. This is a suitable machining method for small series production, prototype production, and shaping of complex surfaces used in aerospace, automotive, shipbuilding, medical industries, and so on. This method is being applied to reduce costs related to specialized molds used for processing mass production in traditional deformation machining.
\n\nTable 2 lists the basic parameters used for ISMF. The influence of these parameters on the formability of different materials has been studied by many researchers around the world. The conclusions about the influence of parameters on various sheet materials are different, and there is no general rule for each specific effect except the effect of the tool diameter. In general, the conclusions can be generalized as follows: when increasing the thickness of sheet metal, reducing the size of the tool and reducing the down step will tend to increase the formability of the sheet metal. It can be explained why the results are not uniform because the parameter areas used for each research are different. In addition, there is a reciprocal interplay between the parameters that affect the formability of the sheet material.
\nParameters | \nSymbol | \nValue | \n
---|---|---|
Radius of forming tools | \nrt\n | \n5–15 (mm) | \n
Metal sheet thickness | \nto\n | \n0.5–3 (mm) | \n
Down step | \nz | \n0.1–2 (mm) | \n
Tilt angle after deformation | \nψmax\n | \nto 90(°) | \n
Deformation speed | \nS | \n500–2000 (mm/min) | \n
Axial force | \nFA\n | \n300–1000 (N) | \n
Horizontal bending force | \nFb\n | \n100–500 (N) | \n
Basic parameters of ISMF.
The history of ISMF was started in 1967 when Leszak [9] obtained a patent for the solution: “Equipment and process of ISMF.” The idea was to be ahead of its time, but subsequent studies were not conducted until the 1990s when studies were conducted mainly on circular-shaped workpieces and products could be shaped on horizontal lathes.
\nIn 2001, along with the development of three-axis CNC milling centers, the method of ISMF was continuously deployed. Previously only specialized CNC machines were used for this shaping process. This is the starting point for studies conducted outside Japan. Some of the most active researchers since then can be listed as Jeswiet et al. [10]. Although it has been more than three decades of research and development, the technology of ISMF applied in rapid prototyping is still a hot topic to be further studied by the following reasons: Accuracy of deformed products are still limited; the heat generation by the contact and friction between the forming tool and the material sheet is significant; there are high surface roughness and low productivity. Some recent applications of ISMF process have been summarized by several researchers [11, 12, 13, 14, 15, 16].
\nWhen comparing the deformations of ISMF with other traditional forming process such as stamping, clawing, pulling, bending, and so on, researchers have shown that the forming limit diagram (FLD) of ISMF is raised much higher than the traditional forming limit diagrams calculated from the theory of plastic deformation as well as obtained from experiments through traditional testing methods. The forming limit diagrams of traditional deformations are V-shaped. But studies have shown that the formability in ISMF is larger and shaped almost like a straight line in the minor-major strain space. In order to obtain the FLDs of ISMF, they could be based on the ductile fracture criterion of Clift et al. as shown in Eq. (1). The points on FLDs are calculated based on the initial point of the minor-major strain point convergence at the equilibrium strain region; the following points are calculated according to the relationship between the minor-major strain ratios (Eq. (2)) and the equivalent strain function for the plane stress state (Eq. (3)):
\nwhere \n
where
To determine
ISMF method can be considered a new rapid prototyping method without creating expensive molds, and the time to create parts from the idea of the final product is less than 24 hours. ISMS method can also be distinguished as a layered technology process because the products are deformed according to the continuous layers of the tool path. Because the processing time for a product is large, this method could not be applied to mass production. However, the low initial cost makes it suitable for small series of products or rapid prototyping. The cost for a product of the ISMF method is difficult to identify and is often higher than the initial prediction. Products must be created in a CAD system, and tool paths are generated in a CAM system. It will consume about 2–5 hours of continuous work by a technician for a product with complex shapes. The setup and operation times on a CNC machine will also take about 3 hours. Therefore, this method should not be used to manufacture simple products.
\nIn the medical industry, this method can be used to make replacement parts of the human body. Specific examples are shown in Figure 1a and b, where researchers have applied ISMF to create details such as teeth support plates and fragments of the skull with light titanium material. Recently, this method has been tested and applied in the automotive industry to make some new models of heatsink, headlamp, automotive cover, and some other products (Figure 1c and e). Currently, this processing method is still a hot topic in research for many different products and different materials.
\nThe tool path generation of ISMF method is similar to the tool path generation for finishing the surface with CNC machines by the cutting method, where the metal sheets are clamped on a dedicated jig. Along the depth of product will be divided into a number of required forming layers. At each forming layer, from the top to the bottom of the product, the sheet metal will be deformed step by step along with the shape profile of each layer. Every time a forming layer is completed, the elevation
Square cups formed by rotational incremental sheet forming: (a) 45° wall angle, (b) 60° wall angle, and (c) 70° wall angle at which point cracks occurred [
Deformed shape in finite element simulation: (a) 45° wall angle, (b) 60° wall angle, and (c) 70° wall angle [
Forming limiting curves of ISMF compared to traditional FLC methods [
Tool path generation ISMF simulation and experiment.
Intersection point recognition.
Calculation of tool location points (CL data).
Tool path generated from CAM software.
Finite element model for simulation.
Simulation and experimental results for square shape with different wall angles. (a) The wall angle of 80°. (b) The wall angle of 45°.
The evolution of deformed shape in FEM of ISMF [
Experiments of incremental forming for various square shape sizes with (a) 80° wall angle, (b) 85° wall angle, and (c) 60° wall angle.
Obtained forming limit based on the maximum wall angle versus maximum deformed height [
Simulation and rapid prototyping of complex surfaces. (a) Intermediate deformations, and (b) Final shape.
Types of errors occurring during ISMF process. (a) Deformation at tool stroke h = 8.5 mm, (b) Deformation at tool stroke h = 17 mm, and (c) Final results at tool stroke h = 22 mm.
The first method is the basic programming through the use of MATLAB software which was implemented as follows: the initial CAD model is stored as standard triangular language (STL) files, which include a list of triangular shapes that describes the outer surface of the CAD object. These triangular surfaces are described by a set of X, Y, and Z coordinates for three vertices and a normal vector. To find the internal intersection points of the triangle used for calculating the tool position at each Z layer, the points are projected in the radial direction from the center axis and calculate their intersection with the created surface. Those intersection points must be checked to see whether they are inside or outside of corresponding triangular elements as illustrated in Figure 9. After finding the points in the inner domain of the triangle, it is possible to calculate the position points of the tool according to Eq. (6) and Figure 10.
\nwhere
The second method used to calculate tool position points is to immediately utilize the advantage of CAM software, where CAD models are stored in IGES file format and exported to CAM environment such as CIMATRON, DELCAM, MASTERCAM, etc. to conduct the simulation according to different types of tools. Usually, the selected tool path type will be a
Numerical simulations for ISMF are still one of the challenges that need to be solved due to the loss of time in the simulation process, and the contact between the tool and the forming surface is always replaced. Therefore, the meshed surfaces in the simulation should not be too complicated, and the tool paths must be programmed and imported into the input files of CAE software such as ABAQUS, DEFORM, LS-DYNA, and so on. This software can provide a simulation of elastic and plastic deformation of the sheet metal forming process. Characteristics such as stress distribution, deformation, ductile fracture, etc. can be easily inspected through the simulation process. The results of the simulation process can then be used to obtain the optimal shape as well as the material properties required for the final product. Before simulating the process of forming deformation, mechanical properties of 3D models, geometric profiles of products, and contact surfaces must be built. Elastoplastic model is often selected to simulate through material properties such as elastic modulus, Poisson’s coefficient, and density of materials. The flow stress curve equations of materials and anisotropic models must be applied to describe the plastic flow rule of materials.
\nMeshed elements used in finite element simulation of ISMF are often shell element models with more than five integral points according to the thickness of the shell. Using the integral points in the thickness direction of the shell element could be replaced by the solid element and described the effects of the tension and compression area on the simulation results. Most shell elements consider the normal stress to be zero in the direction of the thickness, but because the shear stress in that direction may be not zero, then the stress state is not plane stress. Some shell elements consider the normal stress in the thick direction, and they are called thick shell elements. Figure 12 shows the finite element model for the ISMF simulation process, in which forming tools and supported molds are designed and calibrated with 3D software, the blank is modeled with shell elements (S4R), and tools and molds are modeled by rigid surface elements (R3D4). The average size of the elements can be selected to suit the calculation time and desired accuracy.
\nObtaining input data for the simulation of ISMF is not an easy task. The friction coefficients between the forming tool and the material sheet have hardly been measured and determined correctly by previous researches. Measuring forming forces and converting them into corresponding friction coefficients are also difficult. In general, the friction coefficient of the forming process could be assumed in the range from 0.05 to 0.2 depending on the specific conditions of the forming process. Another difficult issue is how to obtain reliable material data. Most studies use standard materials and conduct experiments using conventional tension or compression test methods. However, these experimental data only provide results with lower strain values than those observed during ISMF. Therefore, the representation of the stress-strain curve for higher deformation levels is necessary to simulate the ISMF process.
\nAfter collecting experimental data, this data is used as input parameters for the simulation process. To determine the accuracy of the simulation process compared to the corresponding experiment, the square tower shape with different angles was simulated to predict the forming height obtained until the appearance of the tear of products for materials.
\n\nFigure 13 describes the simulation results. From the simulation results, we can observe the ductile fracture phenomenon occurs with the wall angle of 80° and the forming height of 25 mm (Figure 13a). While forming with a square shape with 45° wall angle, the fracture is not observed even until the end of forming process with the final forming height of 40 mm (Figure 13b). In order to verify the predictability of the simulation process, the corresponding experiments were also conducted as shown in Figure 13. The experimental results are in good agreement with corresponding simulation results.
\nHowever, commercial software is inconvenient to simulate an incremental forming process for a complex shape because the various programs only support simple movements such as linear or circular motions. To overcome this inconvenience, the combination of CAM and computer-aided engineering (CAE) simulation using MATLAB programming to modify input ABAQUS file has been proposed. This method was also applied in previous study to simulate ISF for complex part (Figure 14).
\nToday, sheet metal forming methods based on the deformation of materials play an important role in mechanical production and metallurgy. The growing applications of numerical simulations in the field of sheet metal forming have helped engineers solve various problems in improving the formability and reducing the cost and time of products. Accurate simulation results are necessary for mold and product design. Many factors affect the final simulation results, but the most important input data for the ductile fracture prediction of a product is the forming limit curve of the sheet material. Several studies have been carried out to predict and evaluate the FLC by using experimental and theoretical methods. In addition, this concept has been widely applied in various commercial finite element software packages for technical studies. According to the experimental approach, Keeler [15, 16] tests are popular methods that have been widely used to clarify the levels of FLCs for sheet metals. However, time-consuming and high-cost computing is the main drawback of this testing method. Therefore, considerable effort has been made to obtain FLCs theoretically. Swift [17] can be recognized as a pioneering study on predicting FLC. Hill [18] then proposed a way to improve the accuracy of FLC prediction by adopting necking point criteria. Stören and Rice [19] developed a solution for FLC prediction by applying a force equilibrium between necking and uniform deformed regions. Banabic et al. [20] observed and developed a pre-defect in the material and developed a theory of limited deformation based on imperfections of material thickness. Hora et al. [21] upgraded the Swift diffuse necking criteria and set a modified maximum force criterion (MMFC) by effectively examining the instant deformation state changes until the forming force achieved a maximum value. Some new MMFC models proposed to improve the accuracy of FLC prediction based on theoretical models by solving systems of equations. Currently, the finite element (FE) simulation is an indispensable tool to research, evaluate, and discern physical phenomena modeled by various theoretical and experimental equations. However, the current FLC curves are inconsistent with the experimental results in ISMF. To improve the fitting of experimental data with numerical data, Nguyen and Kim [22] upgraded and introduced Swift’s equation to MMFC and predict FLD curve for cold rolled steel material. They imported obtained forming limit diagram curves to FEM software [23] in order to predict fractures of various square shapes and compare them with corresponding experimental results. In order to verify the effect of tool dimension on FLD at fracture, ductile fracture criterion of Clift et al. [4] should be adopted to predict FLC, simulated and confirmed by corresponding experimental results. After experimentally verified, FLC data were used to simulate different square sizes to show the effect of the wall angle to the maximum height of the square shape and established limits of formability based on the relationship between the maximum destructive height and the corresponding wall angle (Figures 15 and 16). The obtained limit curves could be used to indicate the failure of sound products through the relationship between the wall angles and corresponding maximum height of complex shapes for ISMF process.
\nIn order to perform ISMF for complicated surface products with various wall angles, the designed products must ensure the ability to be formed according to the following specific conditions:
To accommodate with working space of CNC machine
To satisfy the plastic deformation by comparing the large wall angles corresponding to the forming height
To pre-simulate and verify the ductile fracture occurrence (Figure 16)
If it is found that there is a possibility of plastic destruction in a certain area, it is possible to conduct a simulation beforehand to check.
\n\nFigure 17 shows the simulation process and the obtained results after rapid prototyping of complex surface products by ISMF.
\nTo verify and compare the accuracy of the final shape between simulation results, experimental products with CAD-designed surface in ISMF, we can use different sections and measure the shape distribution at different wall profiles and angles as shown in Figure 18. From that comparison, it can be seen that different deviations appear in the process of ISMF such as incorrect tool path generation, error due to tool radius, and error by springback and pillow effect.
\nThus, it can be concluded that the simulation method is a particularly useful method for understanding, predicting, and evaluating the phenomena that occur in the ISMF process. This rapid prototyping method also proves that this is a new and innovative method. ISMF method satisfies the task of researching and developing new products. The proposal steps in this chapter can be applied to the actual manufacturing industry. Products of ISMF are continuously designed and ordered for rapid prototyping sample; when traditional forming methods are not applicable due to limitations on the formability, cost money, and the time for the fabrication of molds, then the ISMF using CNC machine with simple forming tools combined with FEM simulation will prove to be an effective and feasible method.
\nSome obtained scientific outcomes from proposal chapter are:
The forming limit curves of sheet materials for ISMF will be increased when tool diameters decrease.
The high-temperature generation at the contact area of the rotational incremental sheet metal forming process will improve the formability of light alloy sheet materials.
To generate tool path for ISMF process in a simulation of complex surface, MATLAB code should be used to import to FEM input file.
To predict and improve the formability of the ISMF process for industrial sheet products, pre-simulate based on the relationship between maximum wall angle versus maximum deformed height need to perform.
At IntechOpen, we not only specialize in the publication of Book Chapters as part of our Edited Volumes, but also the publication and dissemination of longer manuscripts, known as Long Form Monographs. Monographs allow Authors to focus on presenting a single subject or a specific aspect of that subject and publish their research in detail.
\n\nEven if you have an area of research that does not at first sight fit within a previously defined IntechOpen project, we can still offer support and help you in publishing your individual research. Publishing your IntechOpen book in the form of a Long Form Monograph is a viable alternative.
",metaTitle:"Publish a Whole Book",metaDescription:"At IntechOpen, we not only specialize in the publication of book chapters as part of our Edited Volumes, but also the publication and dissemination of long form manuscripts, known as monographs. Monographs allow authors to focus on presenting a single subject or a specific aspect of that subject and publish their research at length.\n\nPerhaps you have an area of research that does not fit within a previously defined IntechOpen project, but rather need help in publishing your individual research? Publishing your IntechOpen book in the form of a long form monograph is a great alternative.",metaKeywords:null,canonicalURL:"/page/publish-a-whole-book",contentRaw:'[{"type":"htmlEditorComponent","content":"MONOGRAPH - LONG FORM MANUSCRIPT
\\n\\nFORMATS
\\n\\nCOST
\\n\\n10,000 GBP Monograph - Long Form
\\n\\nThe final price includes project management, editorial and peer-review services, technical editing, language copyediting, cover design, book layout, book promotion and ISBN assignment.
\\n\\n*The price does not include Value-Added Tax (VAT). Residents of European Union countries need to add VAT based on the specific rate applied in their country of residence. Institutions and companies registered as VAT taxable entities in their own EU member state will not pay VAT by providing us with their VAT registration number. This is made possible by the EU reverse charge method.
\\n\\nOptional Services
\\n\\nIntechOpen has collaborated with Enago, through its sister brand, Ulatus, which is one of the world’s leading providers of book translation services. The services are designed to convey the essence of your work to readers from across the globe in a language they understand. Enago’s expert translators incorporate cultural nuances in translations to make the content relevant for local audiences while retaining the original meaning and style. Enago translators are equipped to handle all complex and multiple overlapping themes encompassed in a single book and their high degree of linguistic and subject expertise enables them to deliver a superior quality output.
\\n\\nIntechOpen Authors that wish to use this service will receive a 20% discount on all translation services. To find out more information or obtain a quote, please visit: https://www.enago.com/intech.
\\n\\nFUNDING
\\n\\nWe feel that financial barriers should never prevent researchers from publishing their work. Please consult our Open Access Funding page to explore funding opportunities and learn more about how you can finance your IntechOpen publication.
\\n\\nBENEFITS
\\n\\nPUBLISHING PROCESS STEPS
\\n\\nFor a complete overview of all publishing process steps and descriptions, go to How Open Access Publishing Works.
\\n\\nSEND YOUR PROPOSAL
\\n\\nIf you are interested in publishing your book with IntechOpen, please submit your book proposal by completing the Publishing Proposal Form.
\\n\\nNot sure if this is the right option for you? Please refer back to the main Publish with IntechOpen page or feel free to contact us directly at book.department@intechopen.com.
\\n"}]'},components:[{type:"htmlEditorComponent",content:'MONOGRAPH - LONG FORM MANUSCRIPT
\n\nFORMATS
\n\nCOST
\n\n10,000 GBP Monograph - Long Form
\n\nThe final price includes project management, editorial and peer-review services, technical editing, language copyediting, cover design, book layout, book promotion and ISBN assignment.
\n\n*The price does not include Value-Added Tax (VAT). Residents of European Union countries need to add VAT based on the specific rate applied in their country of residence. Institutions and companies registered as VAT taxable entities in their own EU member state will not pay VAT by providing us with their VAT registration number. This is made possible by the EU reverse charge method.
\n\nOptional Services
\n\nIntechOpen has collaborated with Enago, through its sister brand, Ulatus, which is one of the world’s leading providers of book translation services. The services are designed to convey the essence of your work to readers from across the globe in a language they understand. Enago’s expert translators incorporate cultural nuances in translations to make the content relevant for local audiences while retaining the original meaning and style. Enago translators are equipped to handle all complex and multiple overlapping themes encompassed in a single book and their high degree of linguistic and subject expertise enables them to deliver a superior quality output.
\n\nIntechOpen Authors that wish to use this service will receive a 20% discount on all translation services. To find out more information or obtain a quote, please visit: https://www.enago.com/intech.
\n\nFUNDING
\n\nWe feel that financial barriers should never prevent researchers from publishing their work. Please consult our Open Access Funding page to explore funding opportunities and learn more about how you can finance your IntechOpen publication.
\n\nBENEFITS
\n\nPUBLISHING PROCESS STEPS
\n\nFor a complete overview of all publishing process steps and descriptions, go to How Open Access Publishing Works.
\n\nSEND YOUR PROPOSAL
\n\nIf you are interested in publishing your book with IntechOpen, please submit your book proposal by completing the Publishing Proposal Form.
\n\nNot sure if this is the right option for you? Please refer back to the main Publish with IntechOpen page or feel free to contact us directly at book.department@intechopen.com.
\n'}]},successStories:{items:[]},authorsAndEditors:{filterParams:{regionId:"4",sort:"featured,name"},profiles:[{id:"58592",title:"Dr.",name:"Arun",middleName:null,surname:"Shanker",slug:"arun-shanker",fullName:"Arun Shanker",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/58592/images/1664_n.jpg",biography:"Arun K. Shanker is serving as a Principal Scientist (Plant Physiology) with the Indian Council of Agricultural Research (ICAR) at the Central Research Institute for Dryland Agriculture in Hyderabad, India. He is working with the ICAR as a full time researcher since 1993 and has since earned his Advanced degree in Crop Physiology while in service. He has been awarded the prestigious Member of the Royal Society of Chemistry (MRSC), by the Royal Society of Chemistry, London in 2015. Presently he is working on systems biology approach to study the mechanism of abiotic stress tolerance in crops. His main focus now is to unravel the mechanism of drought and heat stress response in plants to tackle climate change related threats in agriculture.",institutionString:null,institution:{name:"Indian Council of Agricultural Research",country:{name:"India"}}},{id:"4782",title:"Prof.",name:"Bishnu",middleName:"P",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/4782/images/system/4782.jpg",biography:"Bishnu P. Pal is Professor of Physics at Mahindra École\nCentrale Hyderabad India since July 1st 2014 after retirement\nas Professor of Physics from IIT Delhi; Ph.D.’1975 from IIT\nDelhi; Fellow of OSA and SPIE; Senior Member IEEE;\nHonorary Foreign Member Royal Norwegian Society for\nScience and Arts; Member OSA Board of Directors (2009-\n11); Distinguished Lecturer IEEE Photonics Society (2005-\n07).",institutionString:null,institution:{name:"Indian Institute of Technology Delhi",country:{name:"India"}}},{id:"69653",title:"Dr.",name:"Chusak",middleName:null,surname:"Limsakul",slug:"chusak-limsakul",fullName:"Chusak Limsakul",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Prince of Songkla University",country:{name:"Thailand"}}},{id:"23804",title:"Dr.",name:"Hamzah",middleName:null,surname:"Arof",slug:"hamzah-arof",fullName:"Hamzah Arof",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/23804/images/5492_n.jpg",biography:"Hamzah Arof received his BSc from Michigan State University, and PhD from the University of Wales. Both degrees were in electrical engineering. His current research interests include signal processing and photonics. Currently he is affiliated with the Department of Electrical Engineering, University of Malaya, Malaysia.",institutionString:null,institution:{name:"University of Malaya",country:{name:"Malaysia"}}},{id:"41989",title:"Prof.",name:"He",middleName:null,surname:"Tian",slug:"he-tian",fullName:"He Tian",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"East China University of Science and Technology",country:{name:"China"}}},{id:"33351",title:null,name:"Hendra",middleName:null,surname:"Hermawan",slug:"hendra-hermawan",fullName:"Hendra Hermawan",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/33351/images/168_n.jpg",biography:null,institutionString:null,institution:{name:"Institut Teknologi Bandung",country:{name:"Indonesia"}}},{id:"11981",title:"Prof.",name:"Hiroshi",middleName:null,surname:"Ishiguro",slug:"hiroshi-ishiguro",fullName:"Hiroshi Ishiguro",position:null,profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRglaQAC/Profile_Picture_1626411846553",biography:"Hiroshi Ishiguro is an award-winning roboticist and innovator. As the Director of the Intelligent Robotics Laboratory, which is part of the Department of Systems Innovation in the Graduate School of Engineering Science at Osaka University, Japan, Ishiguro concentrates on making robots that are similar as possible to humans to understand the human species. A notable project of his laboratory is the Actroid, a humanoid robot with a lifelike appearance and observable behavior such as facial movements. (Sources: http://www.geminoid.jp/en/index.html, https://en.wikipedia.org/wiki/Hiroshi_Ishiguro)",institutionString:null,institution:{name:"Osaka University",country:{name:"Japan"}}},{id:"45747",title:"Dr.",name:"Hsin-I",middleName:null,surname:"Chang",slug:"hsin-i-chang",fullName:"Hsin-I Chang",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"National Chiayi University",country:{name:"Taiwan"}}},{id:"61581",title:"Dr.",name:"Joy Rizki Pangestu",middleName:null,surname:"Djuansjah",slug:"joy-rizki-pangestu-djuansjah",fullName:"Joy Rizki Pangestu Djuansjah",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/61581/images/237_n.jpg",biography:null,institutionString:null,institution:{name:"University of Technology Malaysia",country:{name:"Malaysia"}}},{id:"94249",title:"Prof.",name:"Junji",middleName:null,surname:"Kido",slug:"junji-kido",fullName:"Junji Kido",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Yamagata University",country:{name:"Japan"}}},{id:"12009",title:"Dr.",name:"Ki Young",middleName:null,surname:"Kim",slug:"ki-young-kim",fullName:"Ki Young Kim",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/12009/images/system/12009.jpg",biography:"Http://m80.knu.ac.kr/~doors",institutionString:null,institution:{name:"National Cheng Kung University",country:{name:"Taiwan"}}},{id:"132595",title:"Prof.",name:"Long",middleName:null,surname:"Wang",slug:"long-wang",fullName:"Long Wang",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Peking University",country:{name:"China"}}}],filtersByRegion:[{group:"region",caption:"North America",value:1,count:6630},{group:"region",caption:"Middle and South America",value:2,count:5913},{group:"region",caption:"Africa",value:3,count:2404},{group:"region",caption:"Asia",value:4,count:12563},{group:"region",caption:"Australia and Oceania",value:5,count:1009},{group:"region",caption:"Europe",value:6,count:17574}],offset:12,limit:12,total:12563},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{topicId:"16"},books:[{type:"book",id:"11254",title:"Optical Coherence Tomography",subtitle:null,isOpenForSubmission:!0,hash:"a958c09ceaab1fc44c1dd0a817f48c92",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/11254.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11273",title:"Ankylosing Spondylitis",subtitle:null,isOpenForSubmission:!0,hash:"e07e8cf78550507643fbcf71a6a9d48b",slug:null,bookSignature:"Dr. Jacome Bruges Armas",coverURL:"https://cdn.intechopen.com/books/images_new/11273.jpg",editedByType:null,editors:[{id:"70522",title:"Dr.",name:"Jacome",surname:"Bruges Armas",slug:"jacome-bruges-armas",fullName:"Jacome Bruges Armas"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11294",title:"Blood Donation and Transfusion",subtitle:null,isOpenForSubmission:!0,hash:"5dcef6c86c9137be3e9e73514bc26dbf",slug:null,bookSignature:"Dr. Osaro Erhabor",coverURL:"https://cdn.intechopen.com/books/images_new/11294.jpg",editedByType:null,editors:[{id:"35140",title:"Dr.",name:"Osaro",surname:"Erhabor",slug:"osaro-erhabor",fullName:"Osaro Erhabor"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11566",title:"Periodontology - New Insights",subtitle:null,isOpenForSubmission:!0,hash:"75ef2eae3087ec0c7f2076cc64e2cfc3",slug:null,bookSignature:"Dr. Gokul Sridharan",coverURL:"https://cdn.intechopen.com/books/images_new/11566.jpg",editedByType:null,editors:[{id:"82453",title:"Dr.",name:"Gokul",surname:"Sridharan",slug:"gokul-sridharan",fullName:"Gokul Sridharan"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11568",title:"Staphylococcal Infections - Recent Advances and Perspectives",subtitle:null,isOpenForSubmission:!0,hash:"92c881664d1921c7f2d0fee34b78cd08",slug:null,bookSignature:"Dr. Jaime Bustos-Martínez and Dr. Juan José Valdez-Alarcón",coverURL:"https://cdn.intechopen.com/books/images_new/11568.jpg",editedByType:null,editors:[{id:"59719",title:"Dr.",name:"Jaime",surname:"Bustos-Martínez",slug:"jaime-bustos-martinez",fullName:"Jaime Bustos-Martínez"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11569",title:"Bacterial Sexually Transmitted Infections - New Findings, Diagnosis, Treatment, and Prevention",subtitle:null,isOpenForSubmission:!0,hash:"069d6142ecb0d46d14920102d48c0e9d",slug:null,bookSignature:"Dr. Mihaela Laura Vica",coverURL:"https://cdn.intechopen.com/books/images_new/11569.jpg",editedByType:null,editors:[{id:"189561",title:"Dr.",name:"Mihaela Laura",surname:"Vica",slug:"mihaela-laura-vica",fullName:"Mihaela Laura Vica"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11570",title:"Influenza - New Approaches",subtitle:null,isOpenForSubmission:!0,hash:"157b379b9d7a4bf5e2cc7a742f155a44",slug:null,bookSignature:"Dr. Seyyed Shamsadin Athari and Dr. Entezar Mehrabi Nasab",coverURL:"https://cdn.intechopen.com/books/images_new/11570.jpg",editedByType:null,editors:[{id:"139889",title:"Dr.",name:"Seyyed Shamsadin",surname:"Athari",slug:"seyyed-shamsadin-athari",fullName:"Seyyed Shamsadin Athari"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11576",title:"Malaria - Recent Advances, and New Perspectives",subtitle:null,isOpenForSubmission:!0,hash:"5a01644fb0b4ce24c2f947913d154abe",slug:null,bookSignature:"Prof. Pier Paolo Piccaluga",coverURL:"https://cdn.intechopen.com/books/images_new/11576.jpg",editedByType:null,editors:[{id:"76041",title:"Prof.",name:"Pier Paolo",surname:"Piccaluga",slug:"pier-paolo-piccaluga",fullName:"Pier Paolo Piccaluga"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11577",title:"Tick-Borne Diseases - A Review and an Update of Knowledge on Infections in Human and Animal Population",subtitle:null,isOpenForSubmission:!0,hash:"3d72ae651ee2a04b2368bf798a3183ca",slug:null,bookSignature:"Prof. Elisa Pieragostini",coverURL:"https://cdn.intechopen.com/books/images_new/11577.jpg",editedByType:null,editors:[{id:"51521",title:"Prof.",name:"Elisa",surname:"Pieragostini",slug:"elisa-pieragostini",fullName:"Elisa Pieragostini"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11583",title:"Parkinson’s Disease - Animal Models, Current Therapies and Clinical Trials",subtitle:null,isOpenForSubmission:!0,hash:"99788a4a7f9ee0b4de55de293a2ed3d0",slug:null,bookSignature:"Prof. Sarat Chandra Yenisetti",coverURL:"https://cdn.intechopen.com/books/images_new/11583.jpg",editedByType:null,editors:[{id:"181774",title:"Prof.",name:"Sarat Chandra",surname:"Yenisetti",slug:"sarat-chandra-yenisetti",fullName:"Sarat Chandra Yenisetti"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11584",title:"Migraine Research",subtitle:null,isOpenForSubmission:!0,hash:"44a6090845f971a215ddf013f1dc2027",slug:null,bookSignature:"Dr. Theodoros Mavridis, Dr. Georgios Vavougios and Associate Prof. Dimos-Dimitrios Mitsikostas",coverURL:"https://cdn.intechopen.com/books/images_new/11584.jpg",editedByType:null,editors:[{id:"320230",title:"Dr.",name:"Theodoros",surname:"Mavridis",slug:"theodoros-mavridis",fullName:"Theodoros Mavridis"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11585",title:"Epilepsy - Seizures Without Triggers",subtitle:null,isOpenForSubmission:!0,hash:"b29658aa79663344efeeffd2572ecb42",slug:null,bookSignature:"Prof. Kaneez Fatima Shad",coverURL:"https://cdn.intechopen.com/books/images_new/11585.jpg",editedByType:null,editors:[{id:"31988",title:"Prof.",name:"Kaneez",surname:"Fatima Shad",slug:"kaneez-fatima-shad",fullName:"Kaneez Fatima Shad"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:43},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:13},{group:"topic",caption:"Business, Management and Economics",value:7,count:4},{group:"topic",caption:"Chemistry",value:8,count:25},{group:"topic",caption:"Computer and Information Science",value:9,count:19},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:19},{group:"topic",caption:"Engineering",value:11,count:65},{group:"topic",caption:"Environmental Sciences",value:12,count:9},{group:"topic",caption:"Immunology and Microbiology",value:13,count:12},{group:"topic",caption:"Materials Science",value:14,count:29},{group:"topic",caption:"Mathematics",value:15,count:11},{group:"topic",caption:"Medicine",value:16,count:128},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:9},{group:"topic",caption:"Neuroscience",value:18,count:3},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:7},{group:"topic",caption:"Physics",value:20,count:12},{group:"topic",caption:"Psychology",value:21,count:9},{group:"topic",caption:"Robotics",value:22,count:3},{group:"topic",caption:"Social Sciences",value:23,count:9},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:3}],offset:12,limit:12,total:224},popularBooks:{featuredBooks:[{type:"book",id:"9974",title:"E-Learning and Digital Education in the Twenty-First Century",subtitle:null,isOpenForSubmission:!1,hash:"88b58d66e975df20425fc1dfd22d53aa",slug:"e-learning-and-digital-education-in-the-twenty-first-century",bookSignature:"M. Mahruf C. Shohel",coverURL:"https://cdn.intechopen.com/books/images_new/9974.jpg",editors:[{id:"94099",title:"Dr.",name:"M. Mahruf C.",middleName:null,surname:"Shohel",slug:"m.-mahruf-c.-shohel",fullName:"M. Mahruf C. Shohel"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11001",title:"Density Functional Theory",subtitle:"Recent Advances, New Perspectives and Applications",isOpenForSubmission:!1,hash:"82d53383af78ab41eb982086c02fb2bb",slug:"density-functional-theory-recent-advances-new-perspectives-and-applications",bookSignature:"Daniel Glossman-Mitnik",coverURL:"https://cdn.intechopen.com/books/images_new/11001.jpg",editors:[{id:"198499",title:"Dr.",name:"Daniel",middleName:null,surname:"Glossman-Mitnik",slug:"daniel-glossman-mitnik",fullName:"Daniel Glossman-Mitnik"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10356",title:"Natural Medicinal Plants",subtitle:null,isOpenForSubmission:!1,hash:"943e56ccaaf19ff696d25aa638ae37d6",slug:"natural-medicinal-plants",bookSignature:"Hany A. El-Shemy",coverURL:"https://cdn.intechopen.com/books/images_new/10356.jpg",editors:[{id:"54719",title:"Prof.",name:"Hany",middleName:null,surname:"El-Shemy",slug:"hany-el-shemy",fullName:"Hany El-Shemy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11752",title:"Natural Drugs from Plants",subtitle:null,isOpenForSubmission:!1,hash:"a0a83c0822608ef7592bf16a5ed0ada4",slug:"natural-drugs-from-plants",bookSignature:"Hany A. El-Shemy",coverURL:"https://cdn.intechopen.com/books/images_new/11752.jpg",editors:[{id:"54719",title:"Prof.",name:"Hany",middleName:null,surname:"El-Shemy",slug:"hany-el-shemy",fullName:"Hany El-Shemy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10251",title:"Plankton Communities",subtitle:null,isOpenForSubmission:!1,hash:"e11e441ca2d2d5f631b1b4704505cfb6",slug:"plankton-communities",bookSignature:"Leonel Pereira and Ana Marta Gonçalves",coverURL:"https://cdn.intechopen.com/books/images_new/10251.jpg",editors:[{id:"279788",title:"Dr.",name:"Leonel",middleName:null,surname:"Pereira",slug:"leonel-pereira",fullName:"Leonel Pereira"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10830",title:"Animal Feed Science and Nutrition",subtitle:"Production, Health and Environment",isOpenForSubmission:!1,hash:"79944fc8fbbaa329aed6fde388154832",slug:"animal-feed-science-and-nutrition-production-health-and-environment",bookSignature:"Amlan Kumar Patra",coverURL:"https://cdn.intechopen.com/books/images_new/10830.jpg",editors:[{id:"310962",title:"Dr.",name:"Amlan",middleName:"Kumar",surname:"Patra",slug:"amlan-patra",fullName:"Amlan Patra"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10584",title:"Engineered Wood Products for Construction",subtitle:null,isOpenForSubmission:!1,hash:"421757c56a3735986055250821275a51",slug:"engineered-wood-products-for-construction",bookSignature:"Meng Gong",coverURL:"https://cdn.intechopen.com/books/images_new/10584.jpg",editors:[{id:"274242",title:"Dr.",name:"Meng",middleName:null,surname:"Gong",slug:"meng-gong",fullName:"Meng Gong"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9670",title:"Current Trends in Wheat Research",subtitle:null,isOpenForSubmission:!1,hash:"89d795987f1747a76eee532700d2093d",slug:"current-trends-in-wheat-research",bookSignature:"Mahmood-ur-Rahman Ansari",coverURL:"https://cdn.intechopen.com/books/images_new/9670.jpg",editors:[{id:"185476",title:"Dr.",name:"Mahmood-ur-Rahman",middleName:null,surname:"Ansari",slug:"mahmood-ur-rahman-ansari",fullName:"Mahmood-ur-Rahman Ansari"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9032",title:"Corporate Social Responsibility",subtitle:null,isOpenForSubmission:!1,hash:"f609bf3251d7cc7bae0099a4374adfc3",slug:"corporate-social-responsibility",bookSignature:"Beatrice Orlando",coverURL:"https://cdn.intechopen.com/books/images_new/9032.jpg",editors:[{id:"232969",title:"Prof.",name:"Beatrice",middleName:null,surname:"Orlando",slug:"beatrice-orlando",fullName:"Beatrice Orlando"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10681",title:"Biodegradation Technology of Organic and Inorganic Pollutants",subtitle:null,isOpenForSubmission:!1,hash:"9a6e10e02788092872fd249436898e97",slug:"biodegradation-technology-of-organic-and-inorganic-pollutants",bookSignature:"Kassio Ferreira Mendes, Rodrigo Nogueira de Sousa and Kamila Cabral Mielke",coverURL:"https://cdn.intechopen.com/books/images_new/10681.jpg",editors:[{id:"197720",title:"Ph.D.",name:"Kassio",middleName:null,surname:"Ferreira Mendes",slug:"kassio-ferreira-mendes",fullName:"Kassio Ferreira Mendes"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9808",title:"Contemporary Topics in Patient Safety",subtitle:"Volume 1",isOpenForSubmission:!1,hash:"fb6371607c2c6c02c6a2af8892765aba",slug:"contemporary-topics-in-patient-safety-volume-1",bookSignature:"Stanislaw P. Stawicki and Michael S. Firstenberg",coverURL:"https://cdn.intechopen.com/books/images_new/9808.jpg",editors:[{id:"181694",title:"Dr.",name:"Stanislaw P.",middleName:null,surname:"Stawicki",slug:"stanislaw-p.-stawicki",fullName:"Stanislaw P. Stawicki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9544",title:"Global Trade in the Emerging Business Environment",subtitle:null,isOpenForSubmission:!1,hash:"fb8cb09b9599246add78d508a98273d5",slug:"global-trade-in-the-emerging-business-environment",bookSignature:"Muhammad Mohiuddin, Jingbin Wang , Md. Samim Al Azad and Selim Ahmed",coverURL:"https://cdn.intechopen.com/books/images_new/9544.jpg",editors:[{id:"418514",title:"Dr.",name:"Muhammad",middleName:null,surname:"Mohiuddin",slug:"muhammad-mohiuddin",fullName:"Muhammad Mohiuddin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:12,limit:12,total:4387},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"9974",title:"E-Learning and Digital Education in the Twenty-First Century",subtitle:null,isOpenForSubmission:!1,hash:"88b58d66e975df20425fc1dfd22d53aa",slug:"e-learning-and-digital-education-in-the-twenty-first-century",bookSignature:"M. Mahruf C. Shohel",coverURL:"https://cdn.intechopen.com/books/images_new/9974.jpg",publishedDate:"May 18th 2022",numberOfDownloads:3385,editors:[{id:"94099",title:"Dr.",name:"M. Mahruf C.",middleName:null,surname:"Shohel",slug:"m.-mahruf-c.-shohel",fullName:"M. Mahruf C. Shohel"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11001",title:"Density Functional Theory",subtitle:"Recent Advances, New Perspectives and Applications",isOpenForSubmission:!1,hash:"82d53383af78ab41eb982086c02fb2bb",slug:"density-functional-theory-recent-advances-new-perspectives-and-applications",bookSignature:"Daniel Glossman-Mitnik",coverURL:"https://cdn.intechopen.com/books/images_new/11001.jpg",publishedDate:"May 18th 2022",numberOfDownloads:1875,editors:[{id:"198499",title:"Dr.",name:"Daniel",middleName:null,surname:"Glossman-Mitnik",slug:"daniel-glossman-mitnik",fullName:"Daniel Glossman-Mitnik"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10356",title:"Natural Medicinal Plants",subtitle:null,isOpenForSubmission:!1,hash:"943e56ccaaf19ff696d25aa638ae37d6",slug:"natural-medicinal-plants",bookSignature:"Hany A. El-Shemy",coverURL:"https://cdn.intechopen.com/books/images_new/10356.jpg",publishedDate:"May 11th 2022",numberOfDownloads:3842,editors:[{id:"54719",title:"Prof.",name:"Hany",middleName:null,surname:"El-Shemy",slug:"hany-el-shemy",fullName:"Hany El-Shemy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11752",title:"Natural Drugs from Plants",subtitle:null,isOpenForSubmission:!1,hash:"a0a83c0822608ef7592bf16a5ed0ada4",slug:"natural-drugs-from-plants",bookSignature:"Hany A. El-Shemy",coverURL:"https://cdn.intechopen.com/books/images_new/11752.jpg",publishedDate:"May 11th 2022",numberOfDownloads:3008,editors:[{id:"54719",title:"Prof.",name:"Hany",middleName:null,surname:"El-Shemy",slug:"hany-el-shemy",fullName:"Hany El-Shemy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10251",title:"Plankton Communities",subtitle:null,isOpenForSubmission:!1,hash:"e11e441ca2d2d5f631b1b4704505cfb6",slug:"plankton-communities",bookSignature:"Leonel Pereira and Ana Marta Gonçalves",coverURL:"https://cdn.intechopen.com/books/images_new/10251.jpg",publishedDate:"May 18th 2022",numberOfDownloads:1109,editors:[{id:"279788",title:"Dr.",name:"Leonel",middleName:null,surname:"Pereira",slug:"leonel-pereira",fullName:"Leonel Pereira"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10830",title:"Animal Feed Science and Nutrition",subtitle:"Production, Health and Environment",isOpenForSubmission:!1,hash:"79944fc8fbbaa329aed6fde388154832",slug:"animal-feed-science-and-nutrition-production-health-and-environment",bookSignature:"Amlan Kumar Patra",coverURL:"https://cdn.intechopen.com/books/images_new/10830.jpg",publishedDate:"May 18th 2022",numberOfDownloads:1010,editors:[{id:"310962",title:"Dr.",name:"Amlan",middleName:"Kumar",surname:"Patra",slug:"amlan-patra",fullName:"Amlan Patra"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10584",title:"Engineered Wood Products for Construction",subtitle:null,isOpenForSubmission:!1,hash:"421757c56a3735986055250821275a51",slug:"engineered-wood-products-for-construction",bookSignature:"Meng Gong",coverURL:"https://cdn.intechopen.com/books/images_new/10584.jpg",publishedDate:"April 28th 2022",numberOfDownloads:3918,editors:[{id:"274242",title:"Dr.",name:"Meng",middleName:null,surname:"Gong",slug:"meng-gong",fullName:"Meng Gong"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9670",title:"Current Trends in Wheat Research",subtitle:null,isOpenForSubmission:!1,hash:"89d795987f1747a76eee532700d2093d",slug:"current-trends-in-wheat-research",bookSignature:"Mahmood-ur-Rahman Ansari",coverURL:"https://cdn.intechopen.com/books/images_new/9670.jpg",publishedDate:"May 11th 2022",numberOfDownloads:1654,editors:[{id:"185476",title:"Dr.",name:"Mahmood-ur-Rahman",middleName:null,surname:"Ansari",slug:"mahmood-ur-rahman-ansari",fullName:"Mahmood-ur-Rahman Ansari"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9032",title:"Corporate Social Responsibility",subtitle:null,isOpenForSubmission:!1,hash:"f609bf3251d7cc7bae0099a4374adfc3",slug:"corporate-social-responsibility",bookSignature:"Beatrice Orlando",coverURL:"https://cdn.intechopen.com/books/images_new/9032.jpg",publishedDate:"March 16th 2022",numberOfDownloads:7686,editors:[{id:"232969",title:"Prof.",name:"Beatrice",middleName:null,surname:"Orlando",slug:"beatrice-orlando",fullName:"Beatrice Orlando"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10681",title:"Biodegradation Technology of Organic and Inorganic Pollutants",subtitle:null,isOpenForSubmission:!1,hash:"9a6e10e02788092872fd249436898e97",slug:"biodegradation-technology-of-organic-and-inorganic-pollutants",bookSignature:"Kassio Ferreira Mendes, Rodrigo Nogueira de Sousa and Kamila Cabral Mielke",coverURL:"https://cdn.intechopen.com/books/images_new/10681.jpg",publishedDate:"April 20th 2022",numberOfDownloads:3444,editors:[{id:"197720",title:"Ph.D.",name:"Kassio",middleName:null,surname:"Ferreira Mendes",slug:"kassio-ferreira-mendes",fullName:"Kassio Ferreira Mendes"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"10522",title:"Coding Theory",subtitle:"Recent Advances, New Perspectives and Applications",isOpenForSubmission:!1,hash:"6357e1dd7d38adeb519ca7a10dc9e5a0",slug:"coding-theory-recent-advances-new-perspectives-and-applications",bookSignature:"Sudhakar Radhakrishnan and Sudev Naduvath",coverURL:"https://cdn.intechopen.com/books/images_new/10522.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"26327",title:"Dr.",name:"Sudhakar",middleName:null,surname:"Radhakrishnan",slug:"sudhakar-radhakrishnan",fullName:"Sudhakar Radhakrishnan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10821",title:"Automation and Control",subtitle:"Theories and Applications",isOpenForSubmission:!1,hash:"18463c2291ba306c4dcbabd988227eea",slug:"automation-and-control-theories-and-applications",bookSignature:"Elmer P. Dadios",coverURL:"https://cdn.intechopen.com/books/images_new/10821.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"111683",title:"Prof.",name:"Elmer P.",middleName:"P.",surname:"Dadios",slug:"elmer-p.-dadios",fullName:"Elmer P. Dadios"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11348",title:"Mutagenesis and Mitochondrial-Associated Pathologies",subtitle:null,isOpenForSubmission:!1,hash:"001972b3c5b49367314b13025a449232",slug:"mutagenesis-and-mitochondrial-associated-pathologies",bookSignature:"Michael Fasullo and Angel Catala",coverURL:"https://cdn.intechopen.com/books/images_new/11348.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"258231",title:"Dr.",name:"Michael",middleName:"Thomas",surname:"Fasullo",slug:"michael-fasullo",fullName:"Michael Fasullo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11123",title:"Epoxy-Based Composites",subtitle:null,isOpenForSubmission:!1,hash:"c1c5447cf3b9d6c7688276ac30e80de6",slug:"epoxy-based-composites",bookSignature:"Samson Jerold Samuel Chelladurai, Ramesh Arthanari and M.R.Meera",coverURL:"https://cdn.intechopen.com/books/images_new/11123.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"247421",title:"Dr.",name:"Samson Jerold Samuel",middleName:null,surname:"Chelladurai",slug:"samson-jerold-samuel-chelladurai",fullName:"Samson Jerold Samuel Chelladurai"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10632",title:"Theory and Practice of Tunnel Engineering",subtitle:null,isOpenForSubmission:!1,hash:"7ba17749f9d0b6a62d584a3c320a1f49",slug:"theory-and-practice-of-tunnel-engineering",bookSignature:"Hasan Tosun",coverURL:"https://cdn.intechopen.com/books/images_new/10632.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"79083",title:"Prof.",name:"Hasan",middleName:null,surname:"Tosun",slug:"hasan-tosun",fullName:"Hasan Tosun"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10906",title:"Fungal Reproduction and Growth",subtitle:null,isOpenForSubmission:!1,hash:"f84de0280d54f3b52e3e4585cff24ac1",slug:"fungal-reproduction-and-growth",bookSignature:"Sadia Sultan and Gurmeet Kaur Surindar Singh",coverURL:"https://cdn.intechopen.com/books/images_new/10906.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"176737",title:"Dr.",name:"Sadia",middleName:null,surname:"Sultan",slug:"sadia-sultan",fullName:"Sadia Sultan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10914",title:"Effective Elimination of Structural Racism",subtitle:null,isOpenForSubmission:!1,hash:"f6a2562646c0fd664aca8335bc3b3e69",slug:"effective-elimination-of-structural-racism",bookSignature:"Erick Guerrero",coverURL:"https://cdn.intechopen.com/books/images_new/10914.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"294761",title:"Dr.",name:"Erick",middleName:null,surname:"Guerrero",slug:"erick-guerrero",fullName:"Erick Guerrero"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10664",title:"Animal Reproduction",subtitle:null,isOpenForSubmission:!1,hash:"2d66af42fb17d0a6556bb9ef28e273c7",slug:"animal-reproduction",bookSignature:"Yusuf Bozkurt and Mustafa Numan Bucak",coverURL:"https://cdn.intechopen.com/books/images_new/10664.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"90846",title:"Prof.",name:"Yusuf",middleName:null,surname:"Bozkurt",slug:"yusuf-bozkurt",fullName:"Yusuf Bozkurt"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10940",title:"Plant Hormones",subtitle:"Recent Advances, New Perspectives and Applications",isOpenForSubmission:!1,hash:"5aae8a345f8047ed528914ff3491f643",slug:"plant-hormones-recent-advances-new-perspectives-and-applications",bookSignature:"Christophe Hano",coverURL:"https://cdn.intechopen.com/books/images_new/10940.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"313856",title:"Dr.",name:"Christophe",middleName:"F.E.",surname:"Hano",slug:"christophe-hano",fullName:"Christophe Hano"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10207",title:"Sexual Abuse",subtitle:"An Interdisciplinary Approach",isOpenForSubmission:!1,hash:"e1ec1d5a7093490df314d7887e0b3809",slug:"sexual-abuse-an-interdisciplinary-approach",bookSignature:"Ersi Kalfoğlu and Sotirios Kalfoglou",coverURL:"https://cdn.intechopen.com/books/images_new/10207.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"68678",title:"Dr.",name:"Ersi",middleName:null,surname:"Kalfoglou",slug:"ersi-kalfoglou",fullName:"Ersi Kalfoglou"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"821",title:"Power Engineering",slug:"mechanical-engineering-power-engineering",parent:{id:"121",title:"Mechanical Engineering",slug:"mechanical-engineering"},numberOfBooks:1,numberOfSeries:0,numberOfAuthorsAndEditors:13,numberOfWosCitations:1,numberOfCrossrefCitations:5,numberOfDimensionsCitations:8,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicId:"821",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"7766",title:"Rotating Machinery",subtitle:null,isOpenForSubmission:!1,hash:"4a5842ccd2018c329ea55e152e1545fc",slug:"rotating-machinery",bookSignature:"Getu Hailu",coverURL:"https://cdn.intechopen.com/books/images_new/7766.jpg",editedByType:"Edited by",editors:[{id:"250634",title:"Ph.D.",name:"Getu",middleName:null,surname:"Hailu",slug:"getu-hailu",fullName:"Getu Hailu"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:1,seriesByTopicCollection:[],seriesByTopicTotal:0,mostCitedChapters:[{id:"65843",doi:"10.5772/intechopen.84761",title:"Straight-Bladed Vertical Axis Wind Turbines: History, Performance, and Applications",slug:"straight-bladed-vertical-axis-wind-turbines-history-performance-and-applications",totalDownloads:2743,totalCrossrefCites:4,totalDimensionsCites:6,abstract:"Wind turbine is a kind of rotating machinery. Although the horizontal axis wind turbine (HAWT) is the most popular wind turbine, the vertical axis wind turbine (VAWT) with the main advantages of smart design, novel structure, and wind direction independence receives more and more attention in small-scale wind power market. The straight-bladed VAWT (SB-VAWT) is one of the most researched and studied VAWTs. In this chapter, the historical development of the SB-VAWT will be briefly reviewed firstly. Then the aerodynamic models for the turbine design and performance analysis will be introduced. Finally, the types of traditional and new SB-VAWT and their characteristics and main utilizations will be introduced.",book:{id:"7766",slug:"rotating-machinery",title:"Rotating Machinery",fullTitle:"Rotating Machinery"},signatures:"Yan Li",authors:[{id:"277795",title:"Prof.",name:"Yan",middleName:null,surname:"Li",slug:"yan-li",fullName:"Yan Li"}]},{id:"67029",doi:"10.5772/intechopen.83794",title:"Methodology for Abrasive Wear Evaluation in Elevator Stage Centrifugal Pump Impellers",slug:"methodology-for-abrasive-wear-evaluation-in-elevator-stage-centrifugal-pump-impellers",totalDownloads:752,totalCrossrefCites:0,totalDimensionsCites:1,abstract:"The abrasion resistance of the impellers depends on the characteristics of the materials used in their manufacture. In this work, a methodology is proposed for the evaluation of the abrasive wear of the plates of the centrifugal pump impellers, used in the gross water infrastructure station (GWIS) of sedimentary rivers, due to the sediment load variation and the river fluviometric dimension. In order to determine the wear mode and the relationship of the material-specific wear coefficient (K), due to the sediment concentration, a rotating ball abrasometer test was performed on SAE 8620, gray cast iron (GCI), and nodular cast iron (NCI), used in the manufacture of impellers. As an abrasive suspension, the concentrations of 1, 2, 3, 5, and 10 g L−1 of sediment were used in distilled water. The wear volume as a function of the relative velocity of the mixture in relation to the impeller blades was estimated mathematically. The results show that: i) The abrasive capacity of the sediments in different concentrations; ii) SAE 8620 steel was more resistant to abrasive wear; and iii) the rotational control of the pump as a function of sediment concentration and river level showed the possibility of reducing wear by 30%.",book:{id:"7766",slug:"rotating-machinery",title:"Rotating Machinery",fullTitle:"Rotating Machinery"},signatures:"Rodrigo O.P. Serrano, José G. do V. Moreira, Ana L.P. de Castro, Maria A. Pinto, Edna M. de F. Viana and Carlos B. Martinez",authors:[{id:"275910",title:"Ph.D.",name:"Rodrigo",middleName:null,surname:"Serrano",slug:"rodrigo-serrano",fullName:"Rodrigo Serrano"},{id:"281555",title:"Dr.",name:"José",middleName:null,surname:"Moreira",slug:"jose-moreira",fullName:"José Moreira"},{id:"281557",title:"Dr.",name:"Ana",middleName:"Letícia Pilz",surname:"Castro",slug:"ana-castro",fullName:"Ana Castro"},{id:"281558",title:"Dr.",name:"Edna",middleName:null,surname:"Viana",slug:"edna-viana",fullName:"Edna Viana"},{id:"281559",title:"Dr.",name:"Maria",middleName:null,surname:"Pinto",slug:"maria-pinto",fullName:"Maria Pinto"},{id:"281560",title:"Dr.",name:"Calos",middleName:null,surname:"Martinez",slug:"calos-martinez",fullName:"Calos Martinez"}]},{id:"69828",doi:"10.5772/intechopen.83828",title:"Uncertainty Analysis Techniques Applied to Rotating Machines",slug:"uncertainty-analysis-techniques-applied-to-rotating-machines",totalDownloads:746,totalCrossrefCites:1,totalDimensionsCites:1,abstract:"This chapter presents the modeling procedure, numerical application, and experimental validation of uncertain quantification techniques applied to flexible rotor systems. The uncertainty modeling is based both on the stochastic and fuzzy approaches. The stochastic approach creates a representative model for the flexible rotor system by using the stochastic finite element method. In this case, the uncertain parameters of the rotating machine are characterized by homogeneous Gaussian random fields expressed in a spectral form by using the Karhunen-Loève (KL) expansion. The fuzzy approach uses the fuzzy finite element method, which is based on the α-level optimization. A comparative study regarding the numerical and experimental results obtained from a flexible rotor test rig is analyzed for the stochastic and fuzzy approaches.",book:{id:"7766",slug:"rotating-machinery",title:"Rotating Machinery",fullTitle:"Rotating Machinery"},signatures:"Fabian Andres Lara-Molina, Arinan De Piemonte Dourado, Aldemir Ap. Cavalini and Valder Steffen",authors:[{id:"274498",title:"Prof.",name:"Valder",middleName:null,surname:"Steffen Jr",slug:"valder-steffen-jr",fullName:"Valder Steffen Jr"},{id:"274503",title:"Dr.",name:"Aldemir Ap.",middleName:null,surname:"Cavalini Jr",slug:"aldemir-ap.-cavalini-jr",fullName:"Aldemir Ap. Cavalini Jr"}]},{id:"66712",doi:"10.5772/intechopen.85877",title:"Development and Control of Generator-Converter Topology for Direct-Drive Wind Turbines",slug:"development-and-control-of-generator-converter-topology-for-direct-drive-wind-turbines",totalDownloads:812,totalCrossrefCites:0,totalDimensionsCites:0,abstract:"In this chapter, a new topology for Direct-Drive Wind Turbines (DDWTs) with a low-voltage generator design is presented in order to eliminate the required dc-bus capacitors or dc-link inductors. In the presented topology, the grid-side converter is replaced by a boost Current Source Inverter (CSI) therefore removing the need for the dc-bus electrolytic capacitors which results in increasing the system lifetime. In the developed topology, the synchronous inductance of the generator is utilized. This facilitates the elimination of the intrinsically required dc-link inductor in the CSI which further contributes to a reduction in the overall system weight and size. The boost CSI is capable of converting a low dc voltage to a higher line-to-line voltage. This results in the implementation of a low-voltage generator for DDWTs. The feasibility of the presented low-voltage generator is investigated through Finite Element (FE) computations. In this chapter, a modified 1.5 MW low-voltage generator for the proposed topology is compared with an existing 1.5 MW Permanent Magnet (PM) synchronous generator for DDWTs. The feasibility of the presented topology of generator-converter for DDWTs is verified through simulations and laboratory tests. Furthermore, the controls developed for the developed wind turbine topology is also presented in this chapter.",book:{id:"7766",slug:"rotating-machinery",title:"Rotating Machinery",fullTitle:"Rotating Machinery"},signatures:"Akanksha Singh",authors:[{id:"276799",title:"Dr.",name:"Akanksha",middleName:null,surname:"Singh",slug:"akanksha-singh",fullName:"Akanksha Singh"}]},{id:"66758",doi:"10.5772/intechopen.85910",title:"Advance Measurement Techniques in Turbomachines",slug:"advance-measurement-techniques-in-turbomachines",totalDownloads:686,totalCrossrefCites:0,totalDimensionsCites:0,abstract:"This chapter focuses on advanced measurement techniques that have been used in applications of turbomachines including temperature measurements, pressure measurements, velocity measurements, and strain/stress measurements. Though the measurement techniques are fundamentally the same as those used in other applications, the unique features associated with turbomachines place challenges in implementing these techniques. This chapter covers the fundamental working principles of individual measurement technique as well as the highlights of its application in turbomachines.",book:{id:"7766",slug:"rotating-machinery",title:"Rotating Machinery",fullTitle:"Rotating Machinery"},signatures:"Fangyuan Lou",authors:[{id:"275580",title:"Dr.",name:"Fangyuan",middleName:null,surname:"Lou",slug:"fangyuan-lou",fullName:"Fangyuan Lou"}]}],mostDownloadedChaptersLast30Days:[{id:"65843",title:"Straight-Bladed Vertical Axis Wind Turbines: History, Performance, and Applications",slug:"straight-bladed-vertical-axis-wind-turbines-history-performance-and-applications",totalDownloads:2743,totalCrossrefCites:4,totalDimensionsCites:6,abstract:"Wind turbine is a kind of rotating machinery. Although the horizontal axis wind turbine (HAWT) is the most popular wind turbine, the vertical axis wind turbine (VAWT) with the main advantages of smart design, novel structure, and wind direction independence receives more and more attention in small-scale wind power market. The straight-bladed VAWT (SB-VAWT) is one of the most researched and studied VAWTs. In this chapter, the historical development of the SB-VAWT will be briefly reviewed firstly. Then the aerodynamic models for the turbine design and performance analysis will be introduced. Finally, the types of traditional and new SB-VAWT and their characteristics and main utilizations will be introduced.",book:{id:"7766",slug:"rotating-machinery",title:"Rotating Machinery",fullTitle:"Rotating Machinery"},signatures:"Yan Li",authors:[{id:"277795",title:"Prof.",name:"Yan",middleName:null,surname:"Li",slug:"yan-li",fullName:"Yan Li"}]},{id:"67029",title:"Methodology for Abrasive Wear Evaluation in Elevator Stage Centrifugal Pump Impellers",slug:"methodology-for-abrasive-wear-evaluation-in-elevator-stage-centrifugal-pump-impellers",totalDownloads:752,totalCrossrefCites:0,totalDimensionsCites:1,abstract:"The abrasion resistance of the impellers depends on the characteristics of the materials used in their manufacture. In this work, a methodology is proposed for the evaluation of the abrasive wear of the plates of the centrifugal pump impellers, used in the gross water infrastructure station (GWIS) of sedimentary rivers, due to the sediment load variation and the river fluviometric dimension. In order to determine the wear mode and the relationship of the material-specific wear coefficient (K), due to the sediment concentration, a rotating ball abrasometer test was performed on SAE 8620, gray cast iron (GCI), and nodular cast iron (NCI), used in the manufacture of impellers. As an abrasive suspension, the concentrations of 1, 2, 3, 5, and 10 g L−1 of sediment were used in distilled water. The wear volume as a function of the relative velocity of the mixture in relation to the impeller blades was estimated mathematically. The results show that: i) The abrasive capacity of the sediments in different concentrations; ii) SAE 8620 steel was more resistant to abrasive wear; and iii) the rotational control of the pump as a function of sediment concentration and river level showed the possibility of reducing wear by 30%.",book:{id:"7766",slug:"rotating-machinery",title:"Rotating Machinery",fullTitle:"Rotating Machinery"},signatures:"Rodrigo O.P. Serrano, José G. do V. Moreira, Ana L.P. de Castro, Maria A. Pinto, Edna M. de F. Viana and Carlos B. Martinez",authors:[{id:"275910",title:"Ph.D.",name:"Rodrigo",middleName:null,surname:"Serrano",slug:"rodrigo-serrano",fullName:"Rodrigo Serrano"},{id:"281555",title:"Dr.",name:"José",middleName:null,surname:"Moreira",slug:"jose-moreira",fullName:"José Moreira"},{id:"281557",title:"Dr.",name:"Ana",middleName:"Letícia Pilz",surname:"Castro",slug:"ana-castro",fullName:"Ana Castro"},{id:"281558",title:"Dr.",name:"Edna",middleName:null,surname:"Viana",slug:"edna-viana",fullName:"Edna Viana"},{id:"281559",title:"Dr.",name:"Maria",middleName:null,surname:"Pinto",slug:"maria-pinto",fullName:"Maria Pinto"},{id:"281560",title:"Dr.",name:"Calos",middleName:null,surname:"Martinez",slug:"calos-martinez",fullName:"Calos Martinez"}]},{id:"69167",title:"Introductory Chapter: Rotating Machinery",slug:"introductory-chapter-rotating-machinery",totalDownloads:776,totalCrossrefCites:0,totalDimensionsCites:0,abstract:null,book:{id:"7766",slug:"rotating-machinery",title:"Rotating Machinery",fullTitle:"Rotating Machinery"},signatures:"Getu Hailu",authors:[{id:"250634",title:"Ph.D.",name:"Getu",middleName:null,surname:"Hailu",slug:"getu-hailu",fullName:"Getu Hailu"}]},{id:"66712",title:"Development and Control of Generator-Converter Topology for Direct-Drive Wind Turbines",slug:"development-and-control-of-generator-converter-topology-for-direct-drive-wind-turbines",totalDownloads:812,totalCrossrefCites:0,totalDimensionsCites:0,abstract:"In this chapter, a new topology for Direct-Drive Wind Turbines (DDWTs) with a low-voltage generator design is presented in order to eliminate the required dc-bus capacitors or dc-link inductors. In the presented topology, the grid-side converter is replaced by a boost Current Source Inverter (CSI) therefore removing the need for the dc-bus electrolytic capacitors which results in increasing the system lifetime. In the developed topology, the synchronous inductance of the generator is utilized. This facilitates the elimination of the intrinsically required dc-link inductor in the CSI which further contributes to a reduction in the overall system weight and size. The boost CSI is capable of converting a low dc voltage to a higher line-to-line voltage. This results in the implementation of a low-voltage generator for DDWTs. The feasibility of the presented low-voltage generator is investigated through Finite Element (FE) computations. In this chapter, a modified 1.5 MW low-voltage generator for the proposed topology is compared with an existing 1.5 MW Permanent Magnet (PM) synchronous generator for DDWTs. The feasibility of the presented topology of generator-converter for DDWTs is verified through simulations and laboratory tests. Furthermore, the controls developed for the developed wind turbine topology is also presented in this chapter.",book:{id:"7766",slug:"rotating-machinery",title:"Rotating Machinery",fullTitle:"Rotating Machinery"},signatures:"Akanksha Singh",authors:[{id:"276799",title:"Dr.",name:"Akanksha",middleName:null,surname:"Singh",slug:"akanksha-singh",fullName:"Akanksha Singh"}]},{id:"66758",title:"Advance Measurement Techniques in Turbomachines",slug:"advance-measurement-techniques-in-turbomachines",totalDownloads:686,totalCrossrefCites:0,totalDimensionsCites:0,abstract:"This chapter focuses on advanced measurement techniques that have been used in applications of turbomachines including temperature measurements, pressure measurements, velocity measurements, and strain/stress measurements. Though the measurement techniques are fundamentally the same as those used in other applications, the unique features associated with turbomachines place challenges in implementing these techniques. This chapter covers the fundamental working principles of individual measurement technique as well as the highlights of its application in turbomachines.",book:{id:"7766",slug:"rotating-machinery",title:"Rotating Machinery",fullTitle:"Rotating Machinery"},signatures:"Fangyuan Lou",authors:[{id:"275580",title:"Dr.",name:"Fangyuan",middleName:null,surname:"Lou",slug:"fangyuan-lou",fullName:"Fangyuan Lou"}]}],onlineFirstChaptersFilter:{topicId:"821",limit:6,offset:0},onlineFirstChaptersCollection:[],onlineFirstChaptersTotal:0},preDownload:{success:null,errors:{}},subscriptionForm:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[],offset:0,limit:8,total:null},allSeries:{pteSeriesList:[],lsSeriesList:[],hsSeriesList:[],sshSeriesList:[],testimonialsList:[]},series:{item:{id:"13",title:"Veterinary Medicine and Science",doi:"10.5772/intechopen.73681",issn:"2632-0517",scope:"Paralleling similar advances in the medical field, astounding advances occurred in Veterinary Medicine and Science in recent decades. These advances have helped foster better support for animal health, more humane animal production, and a better understanding of the physiology of endangered species to improve the assisted reproductive technologies or the pathogenesis of certain diseases, where animals can be used as models for human diseases (like cancer, degenerative diseases or fertility), and even as a guarantee of public health. Bridging Human, Animal, and Environmental health, the holistic and integrative “One Health” concept intimately associates the developments within those fields, projecting its advancements into practice. This book series aims to tackle various animal-related medicine and sciences fields, providing thematic volumes consisting of high-quality significant research directed to researchers and postgraduates. It aims to give us a glimpse into the new accomplishments in the Veterinary Medicine and Science field. By addressing hot topics in veterinary sciences, we aim to gather authoritative texts within each issue of this series, providing in-depth overviews and analysis for graduates, academics, and practitioners and foreseeing a deeper understanding of the subject. Forthcoming texts, written and edited by experienced researchers from both industry and academia, will also discuss scientific challenges faced today in Veterinary Medicine and Science. In brief, we hope that books in this series will provide accessible references for those interested or working in this field and encourage learning in a range of different topics.",coverUrl:"https://cdn.intechopen.com/series/covers/13.jpg",latestPublicationDate:"May 25th, 2022",hasOnlineFirst:!0,numberOfPublishedBooks:11,editor:{id:"38652",title:"Prof.",name:"Rita",middleName:null,surname:"Payan-Carreira",slug:"rita-payan-carreira",fullName:"Rita Payan-Carreira",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRiFPQA0/Profile_Picture_1614601496313",biography:"Rita Payan Carreira earned her Veterinary Degree from the Faculty of Veterinary Medicine in Lisbon, Portugal, in 1985. She obtained her Ph.D. in Veterinary Sciences from the University of Trás-os-Montes e Alto Douro, Portugal. After almost 32 years of teaching at the University of Trás-os-Montes and Alto Douro, she recently moved to the University of Évora, Department of Veterinary Medicine, where she teaches in the field of Animal Reproduction and Clinics. Her primary research areas include the molecular markers of the endometrial cycle and the embryo–maternal interaction, including oxidative stress and the reproductive physiology and disorders of sexual development, besides the molecular determinants of male and female fertility. She often supervises students preparing their master's or doctoral theses. She is also a frequent referee for various journals.",institutionString:null,institution:{name:"University of Évora",institutionURL:null,country:{name:"Portugal"}}},editorTwo:null,editorThree:null},subseries:{paginationCount:3,paginationItems:[{id:"86",title:"Business and Management",coverUrl:"https://cdn.intechopen.com/series_topics/covers/86.jpg",isOpenForSubmission:!0,editor:{id:"128342",title:"Prof.",name:"Vito",middleName:null,surname:"Bobek",slug:"vito-bobek",fullName:"Vito Bobek",profilePictureURL:"https://mts.intechopen.com/storage/users/128342/images/system/128342.jpg",biography:"Dr. Vito Bobek works as an international management professor at the University of Applied Sciences FH Joanneum, Graz, Austria. He has published more than 400 works in his academic career and visited twenty-two universities worldwide as a visiting professor. Dr. Bobek is a member of the editorial boards of six international journals and a member of the Strategic Council of the Minister of Foreign Affairs of the Republic of Slovenia. He has a long history in academia, consulting, and entrepreneurship. His own consulting firm, Palemid, has managed twenty significant projects, such as Cooperation Program Interreg V-A (Slovenia-Austria) and Capacity Building for the Serbian Chamber of Enforcement Agents. He has also participated in many international projects in Italy, Germany, Great Britain, the United States, Spain, Turkey, France, Romania, Croatia, Montenegro, Malaysia, and China. Dr. Bobek is also a co-founder of the Academy of Regional Management in Slovenia.",institutionString:"Universities of Applied Sciences FH Joanneum, Austria",institution:null},editorTwo:{id:"293992",title:"Dr.",name:"Tatjana",middleName:null,surname:"Horvat",slug:"tatjana-horvat",fullName:"Tatjana Horvat",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002hXb0hQAC/Profile_Picture_1642419002203",biography:"Tatjana Horvat works as a professor for accountant and auditing at the University of Primorska, Slovenia. She is a Certified State Internal Auditor (licensed by Ministry of Finance RS) and Certified Internal Auditor for Business Sector and Certified accountant (licensed by Slovenian Institute of Auditors). At the Ministry of Justice of Slovenia, she is a member of examination boards for court expert candidates and judicial appraisers in the following areas: economy/finance, valuation of companies, banking, and forensic investigation of economic operations/accounting. At the leading business newspaper Finance in Slovenia (Swedish ownership), she is the editor and head of the area for business, finance, tax-related articles, and educational programs.",institutionString:null,institution:{name:"University of Primorska",institutionURL:null,country:{name:"Slovenia"}}},editorThree:null},{id:"87",title:"Economics",coverUrl:"https://cdn.intechopen.com/series_topics/covers/87.jpg",isOpenForSubmission:!0,editor:{id:"327730",title:"Prof.",name:"Jaime",middleName:null,surname:"Ortiz",slug:"jaime-ortiz",fullName:"Jaime Ortiz",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y00002zaOKZQA2/Profile_Picture_1642145584421",biography:"Dr. Jaime Ortiz holds degrees from Chile, the Netherlands, and the United States. He has held tenured faculty, distinguished professorship, and executive leadership appointments in several universities around the world. Dr. Ortiz has previously worked for international organizations and non-government entities in economic and business matters, and he has university-wide globalization engagement in more than thirty-six countries. He has advised, among others, the United Nations Development Program, Inter-American Development Bank, Organization of American States, Pre-investment Organization of Latin America and the Caribbean, Technical Cooperation of the Suisse Government, and the World Bank. Dr. Ortiz is the author, co-author, or editor of books, book chapters, textbooks, research monographs and technical reports, and refereed journal articles. He is listed in Who’s Who in the World, Who’s Who in America, Who’s Who in Finance and Business, Who’s Who in Business Higher Education, Who’s Who in American Education, and Who’s Who Directory of Economists. Dr. Ortiz has been a Fulbright Scholar and an MSI Leadership Fellow with the W.K. Kellogg Foundation. His teaching interests revolve around global economies and markets while his research focuses on topics related to development and growth, global business decisions, and the economics of technical innovation.",institutionString:null,institution:{name:"University of Houston",institutionURL:null,country:{name:"United States of America"}}},editorTwo:null,editorThree:null},{id:"88",title:"Marketing",coverUrl:"https://cdn.intechopen.com/series_topics/covers/88.jpg",isOpenForSubmission:!1,editor:null,editorTwo:null,editorThree:null}]},overviewPageOFChapters:{paginationCount:1,paginationItems:[{id:"81831",title:"Deep Network Model and Regression Analysis using OLS Method for Predicting Lung Vital Capacity",doi:"10.5772/intechopen.104737",signatures:"Harun Sümbül",slug:"deep-network-model-and-regression-analysis-using-ols-method-for-predicting-lung-vital-capacity",totalDownloads:4,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Decision Science - Recent Advances and Applications",coverURL:"https://cdn.intechopen.com/books/images_new/11604.jpg",subseries:{id:"86",title:"Business and Management"}}}]},overviewPagePublishedBooks:{paginationCount:1,paginationItems:[{type:"book",id:"11392",title:"Leadership in a Changing World",subtitle:"A Multidimensional Perspective",coverURL:"https://cdn.intechopen.com/books/images_new/11392.jpg",slug:"leadership-in-a-changing-world-a-multidimensional-perspective",publishedDate:"May 11th 2022",editedByType:"Edited by",bookSignature:"Muhammad Mohiuddin, Bilal Khalid, Md. Samim Al Azad and Slimane Ed-dafali",hash:"86a6d33cf601587e591064ce92effc02",volumeInSeries:1,fullTitle:"Leadership in a Changing World - A Multidimensional Perspective",editors:[{id:"418514",title:"Dr.",name:"Muhammad",middleName:null,surname:"Mohiuddin",slug:"muhammad-mohiuddin",fullName:"Muhammad Mohiuddin",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y000038UqSfQAK/Profile_Picture_2022-05-13T10:39:03.jpg",biography:"Dr. Muhammad Mohiuddin is an Associate Professor of International Business at Laval University, Canada. He has taught at Thompson Rivers University, Canada; University of Paris-Est, France; Osnabruck University of Applied Science, Germany; and Shanghai Institute of Technology and Tianjin University of Technology, China. He has published research in Research Policy, Applied Economics, Review of Economic Philosophy, Strategic Change, International Journal of Logistics, Sustainability, Journal of Environmental Management, Journal of Global Information Management, Journal of Cleaner Production, M@N@GEMENT, and more. He is a member of CEDIMES Institut (France), Academy of International Business (AIB), Strategic Management Society (SMS), Academy of Management (AOM), Administrative Science Association of Canada (ASAC), and Canadian council of small business and entrepreneurship (CCSBE). He is currently the director of the Research Group on Contemporary Asia (GERAC) at Laval University. He is also co-managing editor of Transnational Corporations Review and a guest editor for Electronic Commerce Research and Journal of Internet Technology.",institutionString:"Université Laval",institution:{name:"Université Laval",institutionURL:null,country:{name:"Canada"}}}]}]},openForSubmissionBooks:{paginationCount:2,paginationItems:[{id:"11579",title:"Animal Welfare - New Insights",coverURL:"https://cdn.intechopen.com/books/images_new/11579.jpg",hash:"12e4f41264cbe99028655e5463fa941a",secondStepPassed:!1,currentStepOfPublishingProcess:2,submissionDeadline:"June 1st 2022",isOpenForSubmission:!0,editors:[{id:"51520",title:"Dr.",name:"Shao-Wen",surname:"Hung",slug:"shao-wen-hung",fullName:"Shao-Wen Hung"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{id:"11578",title:"Antibiotics and Probiotics in Animal Food - Impact and Regulation",coverURL:"https://cdn.intechopen.com/books/images_new/11578.jpg",hash:"3731c009f474c6ed4293f348ca7b27ac",secondStepPassed:!1,currentStepOfPublishingProcess:2,submissionDeadline:"June 3rd 2022",isOpenForSubmission:!0,editors:[{id:"225390",title:"Dr.",name:"Asghar Ali",surname:"Kamboh",slug:"asghar-ali-kamboh",fullName:"Asghar Ali Kamboh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null}]},onlineFirstChapters:{paginationCount:0,paginationItems:[]},subseriesFiltersForOFChapters:[],publishedBooks:{paginationCount:11,paginationItems:[{type:"book",id:"10664",title:"Animal Reproduction",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/10664.jpg",slug:"animal-reproduction",publishedDate:"May 25th 2022",editedByType:"Edited by",bookSignature:"Yusuf Bozkurt and Mustafa Numan Bucak",hash:"2d66af42fb17d0a6556bb9ef28e273c7",volumeInSeries:11,fullTitle:"Animal Reproduction",editors:[{id:"90846",title:"Prof.",name:"Yusuf",middleName:null,surname:"Bozkurt",slug:"yusuf-bozkurt",fullName:"Yusuf Bozkurt",profilePictureURL:"https://mts.intechopen.com/storage/users/90846/images/system/90846.jpg",institutionString:"İskenderun Technical University",institution:{name:"İskenderun Technical University",institutionURL:null,country:{name:"Turkey"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"10830",title:"Animal Feed Science and Nutrition",subtitle:"Production, Health and Environment",coverURL:"https://cdn.intechopen.com/books/images_new/10830.jpg",slug:"animal-feed-science-and-nutrition-production-health-and-environment",publishedDate:"May 18th 2022",editedByType:"Edited by",bookSignature:"Amlan Kumar Patra",hash:"79944fc8fbbaa329aed6fde388154832",volumeInSeries:10,fullTitle:"Animal Feed Science and Nutrition - Production, Health and Environment",editors:[{id:"310962",title:"Dr.",name:"Amlan",middleName:"Kumar",surname:"Patra",slug:"amlan-patra",fullName:"Amlan Patra",profilePictureURL:"https://mts.intechopen.com/storage/users/310962/images/system/310962.jpg",institutionString:null,institution:{name:"West Bengal University of Animal and Fishery Sciences",institutionURL:null,country:{name:"India"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"8737",title:"Rabies Virus at the Beginning of 21st Century",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/8737.jpg",slug:"rabies-virus-at-the-beginning-of-21st-century",publishedDate:"May 11th 2022",editedByType:"Edited by",bookSignature:"Sergey Tkachev",hash:"49cce3f548da548c718c865feb343509",volumeInSeries:9,fullTitle:"Rabies Virus at the Beginning of 21st Century",editors:[{id:"61139",title:"Dr.",name:"Sergey",middleName:null,surname:"Tkachev",slug:"sergey-tkachev",fullName:"Sergey Tkachev",profilePictureURL:"https://mts.intechopen.com/storage/users/61139/images/system/61139.png",institutionString:"Russian Academy of Sciences",institution:{name:"Russian Academy of Sciences",institutionURL:null,country:{name:"Russia"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"10496",title:"Advanced Studies in the 21st Century Animal Nutrition",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/10496.jpg",slug:"advanced-studies-in-the-21st-century-animal-nutrition",publishedDate:"December 8th 2021",editedByType:"Edited by",bookSignature:"László Babinszky, Juliana Oliveira and Edson Mauro Santos",hash:"8ffe43a82ac48b309abc3632bbf3efd0",volumeInSeries:8,fullTitle:"Advanced Studies in the 21st Century Animal Nutrition",editors:[{id:"53998",title:"Prof.",name:"László",middleName:null,surname:"Babinszky",slug:"laszlo-babinszky",fullName:"László Babinszky",profilePictureURL:"https://mts.intechopen.com/storage/users/53998/images/system/53998.png",institutionString:"University of Debrecen",institution:{name:"University of Debrecen",institutionURL:null,country:{name:"Hungary"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"10497",title:"Canine Genetics, Health and Medicine",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/10497.jpg",slug:"canine-genetics-health-and-medicine",publishedDate:"June 2nd 2021",editedByType:"Edited by",bookSignature:"Catrin Rutland",hash:"b91512e31ce34032e560362e6cbccc1c",volumeInSeries:7,fullTitle:"Canine Genetics, Health and Medicine",editors:[{id:"202192",title:"Dr.",name:"Catrin",middleName:null,surname:"Rutland",slug:"catrin-rutland",fullName:"Catrin Rutland",profilePictureURL:"https://mts.intechopen.com/storage/users/202192/images/system/202192.png",institutionString:null,institution:{name:"University of Nottingham",institutionURL:null,country:{name:"United Kingdom"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"8545",title:"Animal Reproduction in Veterinary Medicine",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/8545.jpg",slug:"animal-reproduction-in-veterinary-medicine",publishedDate:"January 20th 2021",editedByType:"Edited by",bookSignature:"Faruk Aral, Rita Payan-Carreira and Miguel Quaresma",hash:"13aaddf5fdbbc78387e77a7da2388bf6",volumeInSeries:6,fullTitle:"Animal Reproduction in Veterinary Medicine",editors:[{id:"25600",title:"Prof.",name:"Faruk",middleName:null,surname:"Aral",slug:"faruk-aral",fullName:"Faruk Aral",profilePictureURL:"https://mts.intechopen.com/storage/users/25600/images/system/25600.jpg",institutionString:"Independent Researcher",institution:{name:"Harran University",institutionURL:null,country:{name:"Turkey"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"9081",title:"Equine Science",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/9081.jpg",slug:"equine-science",publishedDate:"September 23rd 2020",editedByType:"Edited by",bookSignature:"Catrin Rutland and Albert Rizvanov",hash:"ac415ef2f5450fa80fdb9cf6cf32cd2d",volumeInSeries:5,fullTitle:"Equine Science",editors:[{id:"202192",title:"Dr.",name:"Catrin",middleName:null,surname:"Rutland",slug:"catrin-rutland",fullName:"Catrin Rutland",profilePictureURL:"https://mts.intechopen.com/storage/users/202192/images/system/202192.png",institutionString:null,institution:{name:"University of Nottingham",institutionURL:null,country:{name:"United Kingdom"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"8460",title:"Reproductive Biology and Technology in Animals",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/8460.jpg",slug:"reproductive-biology-and-technology-in-animals",publishedDate:"April 15th 2020",editedByType:"Edited by",bookSignature:"Juan Carlos Gardón Poggi and Katy Satué Ambrojo",hash:"32ef5fe73998dd723d308225d756fa1e",volumeInSeries:4,fullTitle:"Reproductive Biology and Technology in Animals",editors:[{id:"251314",title:"Dr.",name:"Juan Carlos",middleName:null,surname:"Gardón",slug:"juan-carlos-gardon",fullName:"Juan Carlos Gardón",profilePictureURL:"https://mts.intechopen.com/storage/users/251314/images/system/251314.jpeg",institutionString:"Catholic University of Valencia San Vicente Mártir, Spain",institution:null}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"8524",title:"Lactation in Farm Animals",subtitle:"Biology, Physiological Basis, Nutritional Requirements, and Modelization",coverURL:"https://cdn.intechopen.com/books/images_new/8524.jpg",slug:"lactation-in-farm-animals-biology-physiological-basis-nutritional-requirements-and-modelization",publishedDate:"January 22nd 2020",editedByType:"Edited by",bookSignature:"Naceur M'Hamdi",hash:"2aa2a9a0ec13040bbf0455e34625504e",volumeInSeries:3,fullTitle:"Lactation in Farm Animals - Biology, Physiological Basis, Nutritional Requirements, and Modelization",editors:[{id:"73376",title:"Dr.",name:"Naceur",middleName:null,surname:"M'Hamdi",slug:"naceur-m'hamdi",fullName:"Naceur M'Hamdi",profilePictureURL:"https://mts.intechopen.com/storage/users/73376/images/system/73376.jpg",institutionString:null,institution:null}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"7144",title:"Veterinary Anatomy and Physiology",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7144.jpg",slug:"veterinary-anatomy-and-physiology",publishedDate:"March 13th 2019",editedByType:"Edited by",bookSignature:"Catrin Sian Rutland and Valentina Kubale",hash:"75cdacb570e0e6d15a5f6e69640d87c9",volumeInSeries:2,fullTitle:"Veterinary Anatomy and Physiology",editors:[{id:"202192",title:"Dr.",name:"Catrin",middleName:null,surname:"Rutland",slug:"catrin-rutland",fullName:"Catrin Rutland",profilePictureURL:"https://mts.intechopen.com/storage/users/202192/images/system/202192.png",institutionString:null,institution:{name:"University of Nottingham",institutionURL:null,country:{name:"United Kingdom"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"7233",title:"New Insights into Theriogenology",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7233.jpg",slug:"new-insights-into-theriogenology",publishedDate:"December 5th 2018",editedByType:"Edited by",bookSignature:"Rita Payan-Carreira",hash:"74f4147e3fb214dd050e5edd3aaf53bc",volumeInSeries:1,fullTitle:"New Insights into Theriogenology",editors:[{id:"38652",title:"Prof.",name:"Rita",middleName:null,surname:"Payan-Carreira",slug:"rita-payan-carreira",fullName:"Rita Payan-Carreira",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRiFPQA0/Profile_Picture_1614601496313",institutionString:null,institution:{name:"University of Évora",institutionURL:null,country:{name:"Portugal"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null}]},subseriesFiltersForPublishedBooks:[{group:"subseries",caption:"Animal Nutrition",value:20,count:2},{group:"subseries",caption:"Animal Reproductive Biology and Technology",value:28,count:4},{group:"subseries",caption:"Animal Science",value:19,count:5}],publicationYearFilters:[{group:"publicationYear",caption:"2022",value:2022,count:3},{group:"publicationYear",caption:"2021",value:2021,count:3},{group:"publicationYear",caption:"2020",value:2020,count:3},{group:"publicationYear",caption:"2019",value:2019,count:1},{group:"publicationYear",caption:"2018",value:2018,count:1}],authors:{}},subseries:{item:{id:"10",type:"subseries",title:"Animal Physiology",keywords:"Physiology, Comparative, Evolution, Biomolecules, Organ, Homeostasis, Anatomy, Pathology, Medical, Cell Division, Cell Signaling, Cell Growth, Cell Metabolism, Endocrine, Neuroscience, Cardiovascular, Development, Aging, Development",scope:"Physiology, the scientific study of functions and mechanisms of living systems, is an essential area of research in its own right, but also in relation to medicine and health sciences. The scope of this topic will range from molecular, biochemical, cellular, and physiological processes in all animal species. Work pertaining to the whole organism, organ systems, individual organs and tissues, cells, and biomolecules will be included. Medical, animal, cell, and comparative physiology and allied fields such as anatomy, histology, and pathology with physiology links will be covered in this topic. Physiology research may be linked to development, aging, environment, regular and pathological processes, adaptation and evolution, exercise, or several other factors affecting, or involved with, animal physiology.",coverUrl:"https://cdn.intechopen.com/series_topics/covers/10.jpg",hasOnlineFirst:!1,hasPublishedBooks:!1,annualVolume:11406,editor:{id:"202192",title:"Dr.",name:"Catrin",middleName:null,surname:"Rutland",slug:"catrin-rutland",fullName:"Catrin Rutland",profilePictureURL:"https://mts.intechopen.com/storage/users/202192/images/system/202192.png",biography:"Catrin Rutland is an Associate Professor of Anatomy and Developmental Genetics at the University of Nottingham, UK. She obtained a BSc from the University of Derby, England, a master’s degree from Technische Universität München, Germany, and a Ph.D. from the University of Nottingham. She undertook a post-doctoral research fellowship in the School of Medicine before accepting tenure in Veterinary Medicine and Science. Dr. Rutland also obtained an MMedSci (Medical Education) and a Postgraduate Certificate in Higher Education (PGCHE). She is the author of more than sixty peer-reviewed journal articles, twelve books/book chapters, and more than 100 research abstracts in cardiovascular biology and oncology. She is a board member of the European Association of Veterinary Anatomists, Fellow of the Anatomical Society, and Senior Fellow of the Higher Education Academy. Dr. Rutland has also written popular science books for the public. https://orcid.org/0000-0002-2009-4898. www.nottingham.ac.uk/vet/people/catrin.rutland",institutionString:null,institution:{name:"University of Nottingham",institutionURL:null,country:{name:"United Kingdom"}}},editorTwo:null,editorThree:null,series:{id:"10",title:"Physiology",doi:"10.5772/intechopen.72796",issn:"2631-8261"},editorialBoard:[{id:"306970",title:"Mr.",name:"Amin",middleName:null,surname:"Tamadon",slug:"amin-tamadon",fullName:"Amin Tamadon",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002oHR5wQAG/Profile_Picture_1623910304139",institutionString:null,institution:{name:"Bushehr University of Medical Sciences",institutionURL:null,country:{name:"Iran"}}},{id:"251314",title:"Dr.",name:"Juan Carlos",middleName:null,surname:"Gardón",slug:"juan-carlos-gardon",fullName:"Juan Carlos Gardón",profilePictureURL:"https://mts.intechopen.com/storage/users/251314/images/system/251314.jpeg",institutionString:"Catholic University of Valencia San Vicente Mártir, Spain",institution:null},{id:"245306",title:"Dr.",name:"María Luz",middleName:null,surname:"Garcia Pardo",slug:"maria-luz-garcia-pardo",fullName:"María Luz Garcia Pardo",profilePictureURL:"https://mts.intechopen.com/storage/users/245306/images/system/245306.png",institutionString:null,institution:{name:"Miguel Hernandez University",institutionURL:null,country:{name:"Spain"}}},{id:"283315",title:"Prof.",name:"Samir",middleName:null,surname:"El-Gendy",slug:"samir-el-gendy",fullName:"Samir El-Gendy",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRduYQAS/Profile_Picture_1606215849748",institutionString:null,institution:{name:"Alexandria University",institutionURL:null,country:{name:"Egypt"}}}]},onlineFirstChapters:{paginationCount:0,paginationItems:[]},publishedBooks:{paginationCount:4,paginationItems:[{type:"book",id:"10664",title:"Animal Reproduction",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/10664.jpg",slug:"animal-reproduction",publishedDate:"May 25th 2022",editedByType:"Edited by",bookSignature:"Yusuf Bozkurt and Mustafa Numan Bucak",hash:"2d66af42fb17d0a6556bb9ef28e273c7",volumeInSeries:11,fullTitle:"Animal Reproduction",editors:[{id:"90846",title:"Prof.",name:"Yusuf",middleName:null,surname:"Bozkurt",slug:"yusuf-bozkurt",fullName:"Yusuf Bozkurt",profilePictureURL:"https://mts.intechopen.com/storage/users/90846/images/system/90846.jpg",institutionString:"İskenderun Technical University",institution:{name:"İskenderun Technical University",institutionURL:null,country:{name:"Turkey"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"8545",title:"Animal Reproduction in Veterinary Medicine",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/8545.jpg",slug:"animal-reproduction-in-veterinary-medicine",publishedDate:"January 20th 2021",editedByType:"Edited by",bookSignature:"Faruk Aral, Rita Payan-Carreira and Miguel Quaresma",hash:"13aaddf5fdbbc78387e77a7da2388bf6",volumeInSeries:6,fullTitle:"Animal Reproduction in Veterinary Medicine",editors:[{id:"25600",title:"Prof.",name:"Faruk",middleName:null,surname:"Aral",slug:"faruk-aral",fullName:"Faruk Aral",profilePictureURL:"https://mts.intechopen.com/storage/users/25600/images/system/25600.jpg",institutionString:"Independent Researcher",institution:{name:"Harran University",institutionURL:null,country:{name:"Turkey"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"8460",title:"Reproductive Biology and Technology in Animals",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/8460.jpg",slug:"reproductive-biology-and-technology-in-animals",publishedDate:"April 15th 2020",editedByType:"Edited by",bookSignature:"Juan Carlos Gardón Poggi and Katy Satué Ambrojo",hash:"32ef5fe73998dd723d308225d756fa1e",volumeInSeries:4,fullTitle:"Reproductive Biology and Technology in Animals",editors:[{id:"251314",title:"Dr.",name:"Juan Carlos",middleName:null,surname:"Gardón",slug:"juan-carlos-gardon",fullName:"Juan Carlos Gardón",profilePictureURL:"https://mts.intechopen.com/storage/users/251314/images/system/251314.jpeg",institutionString:"Catholic University of Valencia San Vicente Mártir, Spain",institution:null}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"7233",title:"New Insights into Theriogenology",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7233.jpg",slug:"new-insights-into-theriogenology",publishedDate:"December 5th 2018",editedByType:"Edited by",bookSignature:"Rita Payan-Carreira",hash:"74f4147e3fb214dd050e5edd3aaf53bc",volumeInSeries:1,fullTitle:"New Insights into Theriogenology",editors:[{id:"38652",title:"Prof.",name:"Rita",middleName:null,surname:"Payan-Carreira",slug:"rita-payan-carreira",fullName:"Rita Payan-Carreira",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRiFPQA0/Profile_Picture_1614601496313",institutionString:null,institution:{name:"University of Évora",institutionURL:null,country:{name:"Portugal"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null}]},testimonialsList:[{id:"27",text:"The opportunity to work with a prestigious publisher allows for the possibility to collaborate with more research groups interested in animal nutrition, leading to the development of new feeding strategies and food valuation while being more sustainable with the environment, allowing more readers to learn about the subject.",author:{id:"175967",name:"Manuel",surname:"Gonzalez Ronquillo",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/175967/images/system/175967.png",slug:"manuel-gonzalez-ronquillo",institution:{id:"6221",name:"Universidad Autónoma del Estado de México",country:{id:null,name:"Mexico"}}}},{id:"8",text:"I work with IntechOpen for a number of reasons: their professionalism, their mission in support of Open Access publishing, and the quality of their peer-reviewed publications, but also because they believe in equality.",author:{id:"202192",name:"Catrin",surname:"Rutland",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/202192/images/system/202192.png",slug:"catrin-rutland",institution:{id:"134",name:"University of Nottingham",country:{id:null,name:"United Kingdom"}}}},{id:"18",text:"It was great publishing with IntechOpen, the process was straightforward and I had support all along.",author:{id:"71579",name:"Berend",surname:"Olivier",institutionString:"Utrecht University",profilePictureURL:"https://mts.intechopen.com/storage/users/71579/images/system/71579.png",slug:"berend-olivier",institution:{id:"253",name:"Utrecht University",country:{id:null,name:"Netherlands"}}}}]},submityourwork:{pteSeriesList:[],lsSeriesList:[],hsSeriesList:[],sshSeriesList:[],subseriesList:[{id:"22",title:"Applied Intelligence",scope:"This field is the key in the current industrial revolution (Industry 4.0), where the new models and developments are based on the knowledge generation on applied intelligence. The motor of the society is the industry and the research of this topic has to be empowered in order to increase and improve the quality of our lives.",coverUrl:"https://cdn.intechopen.com/series_topics/covers/22.jpg",keywords:"Machine Learning, Intelligence Algorithms, Data Science, Artificial Intelligence, Applications on Applied Intelligence"},{id:"23",title:"Computational Neuroscience",scope:"Computational neuroscience focuses on biologically realistic abstractions and models validated and solved through computational simulations to understand principles for the development, structure, physiology, and ability of the nervous system. This topic is dedicated to biologically plausible descriptions and computational models - at various abstraction levels - of neurons and neural systems. This includes, but is not limited to: single-neuron modeling, sensory processing, motor control, memory, and synaptic plasticity, attention, identification, categorization, discrimination, learning, development, axonal patterning, guidance, neural architecture, behaviors, and dynamics of networks, cognition and the neuroscientific basis of consciousness. Particularly interesting are models of various types of more compound functions and abilities, various and more general fundamental principles (e.g., regarding architecture, organization, learning, development, etc.) found at various spatial and temporal levels.",coverUrl:"https://cdn.intechopen.com/series_topics/covers/23.jpg",keywords:"Single-Neuron Modeling, Sensory Processing, Motor Control, Memory and Synaptic Pasticity, Attention, Identification, Categorization, Discrimination, Learning, Development, Axonal Patterning and Guidance, Neural Architecture, Behaviours and Dynamics of Networks, Cognition and the Neuroscientific Basis of Consciousness"},{id:"24",title:"Computer Vision",scope:"The scope of this topic is to disseminate the recent advances in the rapidly growing field of computer vision from both the theoretical and practical points of view. Novel computational algorithms for image analysis, scene understanding, biometrics, deep learning and their software or hardware implementations for natural and medical images, robotics, VR/AR, applications are some research directions relevant to this topic.",coverUrl:"https://cdn.intechopen.com/series_topics/covers/24.jpg",keywords:"Image Analysis, Scene Understanding, Biometrics, Deep Learning, Software Implementation, Hardware Implementation, Natural Images, Medical Images, Robotics, VR/AR"},{id:"25",title:"Evolutionary Computation",scope:"Evolutionary computing is a paradigm that has grown dramatically in recent years. This group of bio-inspired metaheuristics solves multiple optimization problems by applying the metaphor of natural selection. It so far has solved problems such as resource allocation, routing, schedule planning, and engineering design. Moreover, in the field of machine learning, evolutionary computation has carved out a significant niche both in the generation of learning models and in the automatic design and optimization of hyperparameters in deep learning models. This collection aims to include quality volumes on various topics related to evolutionary algorithms and, alternatively, other metaheuristics of interest inspired by nature. For example, some of the issues of interest could be the following: Advances in evolutionary computation (Genetic algorithms, Genetic programming, Bio-inspired metaheuristics, Hybrid metaheuristics, Parallel ECs); Applications of evolutionary algorithms (Machine learning and Data Mining with EAs, Search-Based Software Engineering, Scheduling, and Planning Applications, Smart Transport Applications, Applications to Games, Image Analysis, Signal Processing and Pattern Recognition, Applications to Sustainability).",coverUrl:"https://cdn.intechopen.com/series_topics/covers/25.jpg",keywords:"Genetic Algorithms, Genetic Programming, Evolutionary Programming, Evolution Strategies, Hybrid Algorithms, Bioinspired Metaheuristics, Ant Colony Optimization, Evolutionary Learning, Hyperparameter Optimization"},{id:"26",title:"Machine Learning and Data Mining",scope:"The scope of machine learning and data mining is immense and is growing every day. It has become a massive part of our daily lives, making predictions based on experience, making this a fascinating area that solves problems that otherwise would not be possible or easy to solve. This topic aims to encompass algorithms that learn from experience (supervised and unsupervised), improve their performance over time and enable machines to make data-driven decisions. It is not limited to any particular applications, but contributions are encouraged from all disciplines.",coverUrl:"https://cdn.intechopen.com/series_topics/covers/26.jpg",keywords:"Intelligent Systems, Machine Learning, Data Science, Data Mining, Artificial Intelligence"},{id:"27",title:"Multi-Agent Systems",scope:"Multi-agent systems are recognised as a state of the art field in Artificial Intelligence studies, which is popular due to the usefulness in facilitation capabilities to handle real-world problem-solving in a distributed fashion. The area covers many techniques that offer solutions to emerging problems in robotics and enterprise-level software systems. Collaborative intelligence is highly and effectively achieved with multi-agent systems. Areas of application include swarms of robots, flocks of UAVs, collaborative software management. Given the level of technological enhancements, the popularity of machine learning in use has opened a new chapter in multi-agent studies alongside the practical challenges and long-lasting collaboration issues in the field. It has increased the urgency and the need for further studies in this field. We welcome chapters presenting research on the many applications of multi-agent studies including, but not limited to, the following key areas: machine learning for multi-agent systems; modeling swarms robots and flocks of UAVs with multi-agent systems; decision science and multi-agent systems; software engineering for and with multi-agent systems; tools and technologies of multi-agent systems.",coverUrl:"https://cdn.intechopen.com/series_topics/covers/27.jpg",keywords:"Collaborative Intelligence, Learning, Distributed Control System, Swarm Robotics, Decision Science, Software Engineering"}],annualVolumeBook:{},thematicCollection:[],selectedSeries:{title:"Artificial Intelligence",id:"14"},selectedSubseries:null},seriesLanding:{item:{id:"25",title:"Environmental Sciences",doi:"10.5772/intechopen.100362",issn:"2754-6713",scope:"\r\n\tScientists have long researched to understand the environment and man’s place in it. The search for this knowledge grows in importance as rapid increases in population and economic development intensify humans’ stresses on ecosystems. Fortunately, rapid increases in multiple scientific areas are advancing our understanding of environmental sciences. Breakthroughs in computing, molecular biology, ecology, and sustainability science are enhancing our ability to utilize environmental sciences to address real-world problems.
\r\n\tThe four topics of this book series - Pollution; Environmental Resilience and Management; Ecosystems and Biodiversity; and Water Science - will address important areas of advancement in the environmental sciences. They will represent an excellent initial grouping of published works on these critical topics.
\r\n\tPollution is caused by a wide variety of human activities and occurs in diverse forms, for example biological, chemical, et cetera. In recent years, significant efforts have been made to ensure that the environment is clean, that rigorous rules are implemented, and old laws are updated to reduce the risks towards humans and ecosystems. However, rapid industrialization and the need for more cultivable sources or habitable lands, for an increasing population, as well as fewer alternatives for waste disposal, make the pollution control tasks more challenging. Therefore, this topic will focus on assessing and managing environmental pollution. It will cover various subjects, including risk assessment due to the pollution of ecosystems, transport and fate of pollutants, restoration or remediation of polluted matrices, and efforts towards sustainable solutions to minimize environmental pollution.
",annualVolume:11966,isOpenForSubmission:!0,coverUrl:"https://cdn.intechopen.com/series_topics/covers/38.jpg",editor:{id:"110740",title:"Dr.",name:"Ismail M.M.",middleName:null,surname:"Rahman",fullName:"Ismail M.M. Rahman",profilePictureURL:"https://mts.intechopen.com/storage/users/110740/images/2319_n.jpg",institutionString:null,institution:{name:"Fukushima University",institutionURL:null,country:{name:"Japan"}}},editorTwo:{id:"201020",title:"Dr.",name:"Zinnat Ara",middleName:null,surname:"Begum",fullName:"Zinnat Ara Begum",profilePictureURL:"https://mts.intechopen.com/storage/users/201020/images/system/201020.jpeg",institutionString:null,institution:{name:"Fukushima University",institutionURL:null,country:{name:"Japan"}}},editorThree:null,editorialBoard:[{id:"252368",title:"Dr.",name:"Meng-Chuan",middleName:null,surname:"Ong",fullName:"Meng-Chuan Ong",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRVotQAG/Profile_Picture_2022-05-20T12:04:28.jpg",institutionString:null,institution:{name:"Universiti Malaysia Terengganu",institutionURL:null,country:{name:"Malaysia"}}},{id:"63465",title:"Prof.",name:"Mohamed Nageeb",middleName:null,surname:"Rashed",fullName:"Mohamed Nageeb Rashed",profilePictureURL:"https://mts.intechopen.com/storage/users/63465/images/system/63465.gif",institutionString:null,institution:{name:"Aswan University",institutionURL:null,country:{name:"Egypt"}}},{id:"187907",title:"Dr.",name:"Olga",middleName:null,surname:"Anne",fullName:"Olga Anne",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bSBE5QAO/Profile_Picture_2022-04-07T09:42:13.png",institutionString:null,institution:{name:"Klaipeda State University of Applied Sciences",institutionURL:null,country:{name:"Lithuania"}}}]},{id:"39",title:"Environmental Resilience and Management",keywords:"Anthropic effects, Overexploitation, Biodiversity loss, Degradation, Inadequate Management, SDGs adequate practices",scope:"\r\n\tThe environment is subject to severe anthropic effects. Among them are those associated with pollution, resource extraction and overexploitation, loss of biodiversity, soil degradation, disorderly land occupation and planning, and many others. These anthropic effects could potentially be caused by any inadequate management of the environment. However, ecosystems have a resilience that makes them react to disturbances which mitigate the negative effects. It is critical to understand how ecosystems, natural and anthropized, including urban environments, respond to actions that have a negative influence and how they are managed. It is also important to establish when the limits marked by the resilience and the breaking point are achieved and when no return is possible. The main focus for the chapters is to cover the subjects such as understanding how the environment resilience works, the mechanisms involved, and how to manage them in order to improve our interactions with the environment and promote the use of adequate management practices such as those outlined in the United Nations’ Sustainable Development Goals.
",annualVolume:11967,isOpenForSubmission:!0,coverUrl:"https://cdn.intechopen.com/series_topics/covers/39.jpg",editor:{id:"137040",title:"Prof.",name:"Jose",middleName:null,surname:"Navarro-Pedreño",fullName:"Jose Navarro-Pedreño",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRAXrQAO/Profile_Picture_2022-03-09T15:50:19.jpg",institutionString:"Miguel Hernández University of Elche, Spain",institution:null},editorTwo:null,editorThree:null,editorialBoard:[{id:"177015",title:"Prof.",name:"Elke Jurandy",middleName:null,surname:"Bran Nogueira Cardoso",fullName:"Elke Jurandy Bran Nogueira Cardoso",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRGxzQAG/Profile_Picture_2022-03-25T08:32:33.jpg",institutionString:"Universidade de São Paulo, Brazil",institution:null},{id:"211260",title:"Dr.",name:"Sandra",middleName:null,surname:"Ricart",fullName:"Sandra Ricart",profilePictureURL:"https://mts.intechopen.com/storage/users/211260/images/system/211260.jpeg",institutionString:null,institution:{name:"University of Alicante",institutionURL:null,country:{name:"Spain"}}}]},{id:"40",title:"Ecosystems and Biodiversity",keywords:"Ecosystems, Biodiversity, Fauna, Taxonomy, Invasive species, Destruction of habitats, Overexploitation of natural resources, Pollution, Global warming, Conservation of natural spaces, Bioremediation",scope:"