Computer simulation techniques of textile forms already represent an important tool for textile and garment designers, since they offer numerous advantages, such as quick and simple introduction of changes while developing a model in comparison with conventional techniques. Therefore, the modeling and simulation of textile forms will always be an important issue and challenge for the researchers, since close‐to‐reality models are essential for understanding the performance and behavior of textile materials. This chapter deals with computer simulation of different textile forms. In the introductory part, it reviews the development of complex modeling and simulation techniques related to different textile forms. The main part of the chapter focuses on study of the fabric and fused panel drape by using the finite element method and on development of some representative textile forms, above all, on functional and protective clothing for persons who are sitting during performing different activities. Computer simulation techniques and scanned 3D body models in a sitting posture are used for this purpose. Engineering approaches to textile forms’ design for particular purposes, presented in this chapter, show benefits and limitations of specific 3D body scanning and computer simulation techniques and outline the future research challenges.
Part of the book: Computer Simulation
“Nobody is Perfect” is a phrase we often hear and use for different purposes. It can relate to our physical appearances or behavioral properties. A great share of the world’s population is faced with difficulties caused by postural disorders and spinal deformities. In our chapter we are not dealing with medical points of view. Instead, our intention is to highlight the problems and needs of affected people for suitable, well-fitted, and attractive garments. It is a fact that they need clothing items, not only for everyday use but also for special, festive occasions and sports. Finding suitable garments can be a nightmare for them. Normally, ready-made garments cannot be used if the postural disorders and spinal deformities are very expressive. Therefore, an individual approach is needed for planning, designing, and producing such garments. We propose virtual prototyping and CASP methodology for analyzing digitized geometry supported by computer-aided pattern designs for designing suitable, well-fitted garments for people with postural disorders and spinal deformities. “CASP” stands for Curvature, Acceleration, Symmetry, and Proportionality. It is used for methodology to analyze those four properties on surfaces in a virtual computer environment, as explained further on.
Part of the book: Innovations in Spinal Deformities and Postural Disorders