Chapters authored
Holographically Recorded Low Spatial Frequency Volume Bragg Gratings and Holographic Optical Elements
Low spatial frequency volume gratings (a few hundred lines per millimetre) are near the borderline of what can be considered Bragg gratings. Nevertheless, in some applications, their very low selectivity can be a benefit because it increases the angular and spectral working range of the holographic optical element. This chapter presents work carried out using an instantaneously selfdeveloping photopolymer recording material and examines holographic optical elements with spatial frequencies below 500 lines/mm. The advantages of volume photopolymer holographic gratings are discussed in the context of existing research. Specific examples explored include a combination of off‐axis cylindrical lenses used to direct light from a solar simulator onto a c‐Si solar cell, producing increases of up to 60% in the energy collected. A study of the microstructure of such elements is also presented. A good fit is obtained between the experimental and theoretical Bragg curves and the microstructure of the element is examined directly using microscopy. This is followed by a discussion of an unusual holographic recording approach that uses the nonlinearities inherent in low spatial frequency grating profiles to record gratings using a single beam. In conclusion, the properties of low spatial frequency volume gratings are summarized and future development discussed.
Part of the book: Holographic Materials and Optical Systems