Kok Yeow You

By Kok Yeow You, Li Ling You, Chen Son Yue, Hou Kit Mun and Chia Yew Lee

Two main species of cultivated rice in the world are Oryza sativa (Asian rice) and Oryza glaberrima (African rice). The Oryza sativa species, which is grown worldwide, is far more widely utilized compared with the Oryza glaberrima species, which is grown in West Africa. Recently, the annual rice production has reached almost 480 million tonnes, and this demand is expected to rise to 550 million tonnes in 2035. Thus, this increases the need to characterize and maintain the quality of rice and hence to determine the price of rice appropriately. Obviously, modern technologies that can provide fast and accurate measurement are essential in the large-scale industrial rice processing. In this chapter, several technologies and instruments used for rice processing are reviewed. The principle of the measurement for each technology is briefly described. The strength of this chapter is to introduce the application of microwave technology during rice processing, such as rice dying process, rice moisture detection, broken rice measurement and rice insect control. The pros and cons of the microwave method will be discussed in detail. Hence, some standard test laboratory for monitoring of carbohydrate, protein, fat and trace elements content is also described in this chapter.

Part of the book: Rice

By Kok Yeow You

This chapter reviews the application and characterization of material that uses the microwave waveguide systems. For macroscopic characterization, three properties of the material are often tested: complex permittivity, complex permeability and conductivity. Based on the experimental setup and sub-principle of measurements, microwave measurement techniques can be categorized into either resonant technique or nonresonant technique. In this chapter, calibration procedures for non-resonant technique are described. The aperture of open-ended coaxial waveguide has been calibrated using Open-Short-Load procedures. On the other hand, the apertures of rectangular waveguides have been calibrated by using Short-Offset-Offset Short procedures and Through-Reflect-Line calibration kits. Besides, the extraction process of complex permittivity and complex permeability of the material which use the waveguide systems is discussed. For one-port measurement, direct and inverse solutions have been utilized to derive complex permittivity and complex permeability from measured reflection coefficient. For two-port measurement, in general, the material filled in the waveguide has been conventional practice to measure the reflection coefficient and the transmission coefficient by using Nicholson-Ross-Weir (NRW) routines and convert these measurements to relative permittivity, εr and relative permeability, μr. In addition, this chapter also presents the calculation of dielectric properties based on the difference in the phase shifts for the measured transmission coefficients between the air and the material.

Part of the book: Microwave Systems and Applications

By Kok Yeow You

Part of the book: Emerging Microwave Technologies in Industrial, Agricultural, Medical and Food Processing