LNG carrier classes.
\r\n\t- Breeding and Molecular Breeding
\r\n\t- Tissue Culture and Somatic Hybrids
\r\n\t- Diseases and their Management
\r\n\t- Value Addition
\r\n\t- Genomics, Genetics, and Biotechnology
\r\n\t- Whole-Genome Sequencing and QTL mapping
\r\n\t- Genetic transformation and trait development, etc
\r\n\t
The LNG shipping industry had been tremendously cautious in choosing the propulsion system, and the steam turbine had been practically an exclusive option for LNG carriers over the last several decades. Influencing factors including economic consideration, environmental regulation, as well as safety issues made a profound impact on the technology developments implemented on LNG carrier propulsion systems. Since 2004 many LNG carrier projects with propulsion other than steam turbine have been under construction, such as dual-fuel diesel electric propulsion and two-stroke diesel engine propulsion with reliquefaction plant. Steam turbine domination in the LNG carrier sector has been gradually broken. So far there is no standard propulsion system that applicable to all types of LNG carriers [1, 2].
\nThe development history of the propulsion system for LNG carriers is presented in Figure 1. Steam turbine has been the dominating propulsion plant used on LNG carriers since 1960. Because it offers dual fuel burning capability, low maintenance cost and high reliability. However, in order to improve operational efficiency, reduce engine room size and increase cargo capacity, a number of alternative propulsion options have been developed in the industry. In 2004, the four-stroke dual fuel engine broke the domination of the steam turbine and started to be used on LNG carriers as a part of dual fuel diesel electric propulsion system. After 2010, two-stroke dual fuel technology has made a breakthrough and has been applied to LNG carriers, including both the high pressure and low pressure gas injection concept. The two-stroke dual fuel engines can offer substantial efficiency advantages over both the DFDE and steam turbines. So they become a popular propulsion system choice for LNG carriers.
\nLNGC fleet and order book by propulsion type (as of May 2017).
The driving factors for the development of the propulsion system come from the following three aspects [3]:
Change of trade pattern. Traditionally, LNG was almost exclusively traded under inflexible long-term contracts and the vessels are operating on fixed sailing routes. However, the proportion of short-term contracts and even spot cargoes has increased substantially since 2000. So this change requires a more flexible and efficient propulsion system to accommodate various operating profiles.
Upgrading of emission regulation. The NOx emission limits and the Energy Efficiency Design Index (EEDI) are getting more and more stringent. In order to comply with the stricter regulation, the propulsion plant has to improve its emission performance and fuel efficiency.
Improvement on insulation technology. The boil off rate is significantly reduced due to the improvement in LNG tank insulation. This results in the insufficient BOG to fuel the propulsion plant and leads to the development of alternative more fuel efficient propulsion systems.
After an exhaustive review of works related to propulsion systems of LNG carriers, an extensive variety of systems installed on board has been found, ranging from turbines to internal combustion engines with endless variants. Therefore, the purpose of this chapter is to investigate the various LNG carrier propulsion systems, taking into account the latest technology progress and innovation in this field.
\nThe size of an LNG carrier is based on its obtainable volumetric capacity of liquid natural gas in m3. The most common size of LNG carriers delivered or on order is between 120,000 and 180,000 m3, and often referred to as conventional type [4]. The demand for lower LNG transportation costs is most effectively met by increasing the LNG capacity of the LNG carriers. Thus, the LNG carriers to and from Qatar ordered over the last few years are of the large sizes of approx. 210,000 and 265,000 m3, and referred to as Q-flex and Q-max, respectively. The LNG carrier classes often used today can therefore be referred to as listed in Table 1.
\nLNG carrier classes | \nDimensions | \nShip size—LNG capacity | \n
---|---|---|
Small | \nB: up to 40 m, LOA: up to 250 m | \nUp to 90,000 m3 | \n
Small conventional | \nB: 41–49 m, LOA: 270–298 m | \n120,000–149,999 m3 | \n
Large conventional | \nB: 43–46 m, LOA: 285–295 m | \n150,000–180,000 m3 | \n
Q-flex | \nB: approx. 50 m, LOA: approx. 315 m | \n200,000–220,000 m3 | \n
Q-max | \nB: 53–55 m, LOA: approx. 345 m | \nMore than 260,000 m3 | \n
LNG carrier classes.
The traditional LNG trade mode is based on long term shipping contracts and dedicated fleets of ships sailing on the fixed routes and schedules between LNG terminals in the world. The LNG supply chain does not have much buffering capacity and it is very important that the cargo is delivered on time. However, due to the increasing demand and supply of LNG the number of short-term contracts and even spot trade has increased significantly.
\nFrom the shipping point of view this means that the operators are bound to look for ships with more operational flexibility and efficiency in response to varying contractual situations. Primarily this calls for a flexible and efficient propulsion plant able to accommodate different ship speeds and alternative operating profiles [3].
\nMost of LNG carriers have the boil-off gas problem which takes place during storage, loading or discharging and the ship’s voyage. LNG carriers are designed to carry natural gas in liquid form at a temperature below its boiling temperature point. Despite tank insulation designed to limit the admission of external heat, even a small amount of it will cause slight evaporation of the cargo, known as boil-off gas (BOG). The amount of liquid that is evaporating from cargo due to heat leakage and expressed in % of total liquid volume per unit time. Typical values are 0.15%/day or below, recent projected LNG carriers are offered with a boil off rate close to 0.1%.
\nThe BOG result from natural evaporation is unavoidable and has to be removed from the tanks in order to maintain the cargo tank pressure. To relieve the pressure in LNG tanks, BOG can be re-liquefied, used as fuel or burned in a combustion unit. Reliquefaction occurs when evaporated LNG is cooled and reverted back to its liquid state. Excess gas can also be led to the engines which have a capability of burning gas fuel. Another alternative is to burn the unwanted gas in a combustion unit, but this results in wastage of materials and valuable energy.
\nCategorization of containment systems for LNG carriers is shown in Figure 2. The IGC code categorizes cargo tanks into two main types: integral tanks and independent tanks. In addition, the integral tanks are mainly of membrane type and the independent tanks can be further classified into three subcategories, which are referred to as Type A, Type B and Type C. For small-scale LNG carriers and LNG fuelled ships other than LNG carriers, we typically use type C tank. On large-scale carriers, type B and membrane tanks are mainly used. From the fleet breakdown by containment system, we found that over 70% of the active fleet had a membrane tank. This is most likely because prismatic membrane tanks utilize the hull shape more efficiently, and thus have less void space between the cargo tanks and ballast tanks. However, self-supporting type B tanks are more robust and have greater resistance to sloshing forces.
\nCategorization of containment systems for LNG carriers.
The safety requirements for the propulsion system are specified by the international code and classification rules and the regulatory framework is constantly improving along with the development of the propulsion system. Since the dual fuel engines are extensively used on LNG carriers, the revised IGC code has included the gas-fuelled engines. IACS proposed new Unified Requirement to cover the low pressure gas engines. Classifications also issued dedicated rules or guidelines for propulsion system applied on LNG carriers. ABS (American Bureau of Shipping) has issued guide for propulsion systems for LNG carriers, and CCS (China Classification Society) has released guidelines for design, installation and testing of gas engines on LNG carriers [5, 6].
\nThe propulsion system for LNG vessels is closely related with the generation and consumption of the BOG [7]. There are various proposed propulsion systems being used and considered by the industry. From the categorization of propulsion systems for LNG carriers as shown in Figure 3, we can see that the prime movers include steam turbine, gas turbine, diesel engine, dual fuel engine. Based on the prime movers and their combinations, we have six propulsion system options, including steam turbine propulsion, dual fuel diesel electric propulsion, slow speed dual fuel engine propulsion, gas turbine propulsion, slow speed diesel engine propulsion with re-liquefaction plant, and hybrid propulsion system based on steam turbine and gas engine.
\nCategorization of propulsion systems for LNG carriers.
Figure 4 shows a simplified schematic of a typical steam propulsion system. A steam turbine based propulsion system usually comprises two gas/HFO fuelled boilers supplying overheated high pressure steam, typically at a pressure of 60–70 bar at 520°C, to the high and low pressure turbines driving a single propeller via a reduction gearbox [8, 9]. The steam is also used to feed turbo generators which provide electric power for auxiliary services (e.g., hotel load, powering pumps). Two turbo generators are installed to guarantee the redundancy, and each one has a power capacity capable of covering the peak load demand which is normally during full rate cargo discharge. Two auxiliary diesel engines are installed as well, with a combined capacity equal to one of the turbo generator sets, as a safety requirement to supply sufficient power during black outs. The excessive BOG generated in situations when the steam turbine is out of service or at low load is also burned in the boilers, and the steam generated is dumped in the condenser to dissipate the energy to the sea. Through this simple philosophy it is able to stabilize the tank pressure, eliminating the need for a gas combustion unit (GCU).
\nSimplified schematic of a steam propulsion system [9].
The boilers can burn the heavy fuel oil (HFO) and boil-off gas (BOG) simultaneously at any liquid/gas ratio, thus offering a very easy method to handle the BOG. In addition, the steam turbine propulsion is also featured with ease of use, intrinsic reliability, and reduced maintenance costs. However, the steam turbine has the lowest overall efficiency of the propulsion system available, approximately 35% at full load and the efficiency becomes lower as the turbine load goes down, which directly led to high fuel cost and the resulting high CO2 emissions. Another disadvantage is the steam turbine is not space efficient, so in the case of Q-Flex/Q-Max ships with twin screw designs, it is very difficult to arrange side by side steam turbine machinery in the engine rooms. Therefore, steam turbine propulsion is not a feasible solution for Q-Flex/Q-Max ships.
\nThe other big group of vessels with non-steam propulsion is featured with Dual Fuel Diesel Electric plants (DFDE). The DFDE configuration provides a more straightforward and simple layout of the propulsion system. The DFDE propulsion system employs multiple engines of the same type, typically four or five, coupled to electrical generators to supply energy to the entire ship including propulsion, which is driven by means of electric motors [10]. The schematic of a four-stroke DFDE propulsion system is shown in Figure 5.
\nSchematic main machinery of a four-stroke DFDE plant [10].
Dual fuel engines can operate on BOG, MDO or HFO. Duel fuel engines have different operation modes depending on the fuel to be used. When gas is burned as fuel (gas mode), the engine adopts the concept of the lean Otto cycle. On the contrary, if MDO or HFO are used, the engine operates at diesel cycle (diesel mode). In Gas Mode, the BOG is injected to the air intake before each cylinder individually through a gas admission valve, where it is mixed with the charged air before entry to the combustion chamber. The mechanism enables the compressing and injecting of the BOG at a relatively low pressure, approximately 5–6 bar, which reduce the complexity of the fuel gas supply system and thus the risks using methane at high pressure in the engine room. A small amount (approx. 1%) of MDO is also required as a pilot fuel when operating on gas, giving a high-energy ignition source for the main fuel gas charge in the combustion chamber. In diesel mode, the DF-engine works resemble any diesel engine, utilizing traditional jerk pump fuel injection system. Switching between the two operating modes can be conducted stably without interruption in power supply. Gas mode and diesel mode follow the different operating principles, and as a result they have different operating features. The diesel mode performances better in terms of thermal efficiency and dynamic response, while the Gas mode has advantages in terms of fuel cost and exhaust emissions.
\nThe combustion control system is an important issue that must be taken into account in DF engines. In gas mode following Otto cycle, as the engine load increased along with the mean effective pressure, the operating window between misfiring and knocking becomes narrower. To stay within the operating window and have optimal performance for all cylinders regarding safety, efficiency and emissions in all conditions, it requires a system to control the combustion process each cylinder individually and precisely.
\nThe largest dual fuel engines available can develop 950–1000 kW per cylinder and are configured as L-type of 6–9 cylinders or V-type of 12–18 cylinders. The number of engines and configuration of cylinder are selected so as to provide as near optimal loading as possible for the engines required to be operated during the various working conditions of the vessel. With a multi-engine configuration, the DFDE propulsion system provides a superior performance in terms of redundancy and safety.
\nIf there is more BOG available than the power required for the propulsion or electric load, then the excess BOG is sent to the gas combustion unit (GCU). The installed capacity of GCU is usually sized to handle the total BOG capacity on a typical laden journey.
\nIn the DFDE concept, since the power demand for propulsion and cargo handling are in different operating time phase the installed power of the ship can be considerably reduced compared with other mechanical propulsion system, which is a notable advantage. The drawback of this propulsion system is the high investment and maintenance costs, resulting from the dual fuel engines and the increased amount of equipment comprised in the electric propulsion system.
\nTwo-stroke slow speed diesel engines are predominant propulsion plant in merchant shipping, which is benefit from its high efficiency, capability of burning low-quality low cost fuels, and low maintenance costs. Since the two-stroke slow speed engine is a single fuelled (HFO) propulsion plant without a BOG burning capability, the natural BOG from cargo tanks shall be liquefied and sent back to cargo tanks. With the increase in LNG carrier’s dimension to approximately 210,000 and 265,000 m3, referred to as Q-flex and Q-max respectively, the volume of BOG of the tanks has increased significantly and is now within the capacity range of re-liquefaction plant. In this context, the two-stroke slow speed diesel engines with re-liquefaction plant turn into a feasible and attractive option for the ship owners. For this kind of propulsion concept, the abbreviation SSDR is typically used for reference.
\nThe schematic main machinery of a two-stroke diesel engine powered LNG carrier with re-liquefaction plant is illustrated in Figure 6. The main machinery of SSDR based LNG carrier of Q-flex/Q-max size typically comprises two low speed diesel engines for propulsion in twin screw format, and four auxiliary generator sets for electric power generation. The re-liquefaction plant is used for re-liquefying the BOG generated in cargo tanks and returning it to into a liquid state, maintaining a proper pressure in cargo tanks, and moreover avoiding any wastage of the LNG being transported. Besides, a GCU is also equipped to burn the BOG generated which, in case of re-liquefaction plant failures, would be impossible to treat, avoiding the pressure increase in the tanks and could cause great damage.
\nSchematic main machinery of a two-stroke LNG carrier with re-liquefaction plant [10].
The BOG re-liquefaction principal is based on a closed cycle using nitrogen as a refrigerant, absorbing the heat from BOG. In this cycle, cargo boil off is suctioned from the LNG tanks and compressed to 5 bar by a low duty compressor, and then the vapor is cryogenically cooled to −160°C in a heat exchanger. This ensures condensation of all hydrocarbons in the BOG so they can be converted back to LNG, while the nitrogen and other non-condensable remain at gaseous state. These gas impurities are finally removed in a gas-liquid separator where the LNG is separated and delivered back to the cargo tanks with the nitrogen-rich non-condensable gases either discharged to the atmosphere or burnt in the GCU.
\nThe operation of a re-liquefaction plant requires a high electric power supply by auxiliary generators composed of either 3 or 4 power generators. Taking the case of a 149,000 m3 LNG vessel, the re-liquefaction plant has a consumption of 3.5-7 MW depending on the BOG generated in the cargo tanks. The vessel’s net auxiliary power is therefore increased to the order of 14 and 16 MW. Considering the overall performance of the system, the tremendous power consumption of the re-liquefaction plant substantially diminishes the efficiency advantages provided by the two-stroke slow speed diesel engines.
\nThe propulsion system of choice for the majority of LNGC new buildings was the four-stroke engine based DFDE option, from around 2002 until 2012. In December 2012, the slow speed two-stroke dual fuel engines received the first orders for a pair of gas fuelled container vessels, marked the beginning of the two-stroke dual-fuel power train era. Dual fuel engines of two-stroke low-speed types offer major propulsive efficiency advantages over both the DFDE and steam turbines, the most popular propulsion system options during the early stages of development for LNG carriers. Distinct technical routes have been adopted by the two main manufacturers. MAN Diesel & Turbine utilize the high pressure concept while Wartsila focuses on the low pressure concept.
\nInitial LNG ship owner interest in two-stroke, dual-fuel propulsion was focused primarily on the MDT high-pressure plant, known as its Mechanically operated, Electronically controlled, Gas Injection (ME-GI) diesel engine. In recent years, the WinGD low pressure X-DF two-stroke engines have also undergone substantial development and application [11].
\nFigure 7 shows the schematic main machinery of a ME-GI propulsion plant. The ME-GI high pressure gas engines operate on the diesel cycle. The BOG is pressurized through the fuel gas supply system (FGSS), and then directly injected at high pressure (250–300 bar) into the cylinder after the diesel pilot fuel has ignited near the top dead center. It is claimed that this concept would have significant advantages compared with the premixed Otto cycle gas process, i.e. eliminates the risk of knocking and capable of burning gas from any source irrespective of the methane number, due to the fact that the fuel gas is not involved in the compression stroke. This concept makes it possible to utilize high compression ratio designs, thereby offering higher energy efficiency. For a LNG carrier with a capacity of 145,000 m3 or larger, double ME-GI engine solution is the most attractive option, providing the redundancy in terms of propulsion.
\nSchematic main machinery of a ME-GI propulsion plant (high-pressure gas).
The high pressure FGSS for ME-GI engines have two basic system configurations. One system where a piston compressor feeds the ME-GI with high-pressure fuel gas, and one system where an LNG pump and a vaporizer feed the ME-GI with high pressure gas [12, 13]. Besides, a combined option based on the compressor and the LNG pump solution also offers a feasible configuration. For dealing with the BOG exceeds the capability of FGSS or the demand of the engines, a full or partial re-liquefaction system can be installed on board.
\nThe high pressure gas is supplied from the FGSS to the engine room through a double wall piping system, where the gas fuel is contained in the inner pipe and space between the gas fuel piping and the wall of the outer pipe or duct shall be equipped with mechanical underpressure ventilation. This specific arrangement secures that the engine room is regarded as an ordinary engine room rather than a hazardous area, which complies with requirement of “inherently gas safe machinery spaces” specified in the IMO IGF code.
\nIn terms of emissions, the high pressure two-stroke engines reduce the NOx emissions by 40% compared to HFO without exhaust gas treatment, which fulfills the IMO Tier II NOx limits. To achieve Tier III limits, ME-GI engine requires equipping with an EGR or SCR system. Furthermore, the CO2 emissions are reduced by approximately 24% and methane emissions are at a very low level.
\nFigure 8 shows the schematic main machinery of an X-DF propulsion plant. The low pressure X-DF technology is based on the lean-burn Otto cycle, in which fuel and air are premixed and burned at a relatively high air-to-fuel ratio. When gas admission in the cylinder occurs, the piston is at about mid stroke of the compression phase and therefore the pressure in the combustion chamber is low. This allows the gas to be injected at low pressure, ranging from 5 to 16 bar. With the low-pressure gas injection, the gas-air mixtures need an ignition source to start the combustion. The most common ignition method is using a fuel oil pilot injection, with the amount of fuel as low as 0.5% of the total injected fuel [14].
\nSchematic main machinery of a X-DF propulsion plant (low-pressure gas).
The low pressure concept offers the possibility of applying a simple FGSS, since the fuel gas is mixed with the scavenge air at about mid stroke position, the required gas injection pressure is below 16 bar at any operating point. It is claimed that the FGSS is relatively simple, reliable and well-proven. In addition, low pressure gas supply means wider selection of system vendors and installation of less auxiliary engine power, thereby lowering the investment and operating costs.
\nThe most significant advantage of the low-pressure X-DF engine is the low level of emissions of any exhaust gas element. As the low-pressure X-DF engine has a pre-mixed homogeneous lean mixture of gas and air in the combustion chamber, the flame temperatures are relatively low. This results in low levels of NOx production without any after treatment system, approximately 50% of the IMO Tier III limits. Besides, the weighted average of relative methane emission is about 3 g/kWh.
\nSince WinGD X-DF and MAN ME-GI use distinct technical routes, each option has its own advantages and disadvantages in terms of power performance, emission and economy, as the comparison shown in Table 2. The low pressure engines have certain advantages in terms of NOx emissions, gas fuel supply systems and investment costs, while high pressure engines perform better in terms of power, thermal efficiency, gas compatibility and methane slip [15].
\n\n | Low pressure (WinGD X-DF) | \nHigh pressure (MAN ME-GI) | \n
---|---|---|
Power performance | \n\n
| \n\n
| \n
Thermal efficiency | \nApprox. 47% | \nApprox. 50% | \n
NOx emission | \nIMO Tier III | \nIMO Tier II | \n
CH4 slip | \n3 g/kWh | \n0.2 g/kWh | \n
Methane Number (MN) | \nMN ≥ 65 (DCC technology) | \nAdapt to various MN | \n
Gas consumption | \n140–142 g/kWh @100%MCR | \n136–138 g/kWh @100%MCR | \n
Pilot fuel consumption | \n\n
| \n\n
| \n
Fuel gas supply system | \n\n
| \n\n
| \n
CAPEX | \n\n
| \n|
OPEX | \nThe two options are comparable | \n
Comparison of the low pressure system and high pressure system.
Aircraft derivative gas turbine has been used as propulsion machinery for navy ships and electric power generator combined with steam or diesel generators for cruise vessels. The gas turbine is an innovative option introduced on LNG vessels because of their dual fuel (gas and diesel oil) burning capability, high reliability derived from the aeronautical industry, high power/weight ratio, and excellent emission performance [16]. However, the relative low thermal efficiency along with the requirement of using MGO as a backup fuel which with a relative high price, hampers the gas turbines to be an attractive option to be applied on LNG carriers. The gas turbines combined with a steam turbine cycle for waste heat recovery, referred to as Combined Gas turbine Electric & Steam system (COGES), enable the overall efficiency increase to 40%.
\nWith the COGES system, the gas turbine drives the generator, which feeds into the main switchboard in turn and provides the electric power and propulsion demand. The propeller is driven by a frequency-controlled electric motor. The exhaust gases from the gas turbine are used to raise steam in a heat recovery steam generator (HRSG). This steam drives the steam turbine generator in turn, which also feeds into the main switchboard.
\nThe schematic main machinery of a COGES propulsion plant (Rolls-Royce) is illustrated in Figure 9. The COGES designed by the manufacturer Rolls-Royce has two GTs with different powers, one of 36 MW and another of 5 MW. In addition, a 10 MW steam turbine is coupled with a HRSG. During sailing, only the main GT, HSRG, and steam turbine would be in service, providing the electric power and propulsion demand. The purpose of the less powerful turbine (5 MW) is to generate power at port, hence avoiding running the main GT at high fuel consumption.
\nSchematic main machinery of a COGES propulsion plant (Rolls-Royce).
Another COGES configuration is designed by the manufacturer General Electric. The schematic main machinery of this COGES propulsion plant (General Electric) is illustrated in Figure 10. The COGES system has two 20 MW gas turbines, thereby increasing the reliability because the system could guarantee 50% of the electric power supply to continue with the voyage in case of a GT failures. However, as it does not have a low power auxiliary generator as in the case of the Rolls-Royce design, this will result in high consumption while at port. This system requires installing a more powerful steam turbine, approximately 15 MW, to meet the larger demand of waste heat recovery.
\nSchematic main machinery of a COGES propulsion plant (General Electric) [20].
The primary disadvantage of gas turbines is the relatively high capital cost, stemming from the fact that the overall drive system is more complex and expensive than mechanical drives. For a 20–30 MW class gas turbine, its capital cost is approximately 15–20% higher than its diesel engine counterpart. Besides, gas turbines do not have their line-up of engine types for the customer’s selection upon various power demands like diesel engines.
\nSTaGE is an abbreviation for Steam Turbine and Gas Engine, which is a hybrid propulsion system that comprises an ultra-steam turbine (UST) plant on the port side and a combination of a dual-fuel engine and a propulsion electric motor (DFE-PEM plant) on the starboard side [17]. The dual-fuel engine can work on both gas and oil. The configuration of a STaGE propulsion plant is shown in Figure 11.
\nSchematic main machinery of a STaGE propulsion plant (Mitsubishi Heavy Industries) [17].
By using a waste heat recovery system of STaGE plant, the exhaust gas and jacket waste heat from the dual-fuel engine are recovered to heat the feed water going toward the UST plant, achieving significant improvement in fuel efficiency. In the UST plant, the heated feed water flows to the boiler to generate steam to be used to drive the turbine. The electricity generated by the dual-fuel engine drives the propulsion electric motor. Typically, a huge amount of waste heat from the dual-fuel engine is dumped into the exhaust-gas and jacket cooling water. But the STaGE plant uses the waste heat to heat the boiler feedwater, enhancing the total efficiency of the propulsion plant. The waste heat from the dual-fuel engine is also recycled to generate auxiliary steam as well as the drive steam for the main turbine, also enhancing total efficiency. Instead of a turbine generator used in conventional steam turbine plants, the power generator of the dual-fuel engine supplies power to the ship, achieving a simpler plant configuration and higher efficiency. As such, the STaGE plant achieves significant efficiency enhancement by combining two different propulsion engines and by optimizing the waste heat energy.
\nA typical LNG carrier equipped with STaGE plant emits about 40% less CO2 per cargo unit than conventional LNG carriers with a cargo capacity of 147,000 m3 propulsed by a conventional turbine plant. Furthermore, gas burning is available in all operation modes, including in harbors, achieving high environmental performance that meets the IMO Tier III emission regulations implemented in the global ECA. The STaGE plant gains high-reliability by combining the proven turbine plant and DFE-PEM plant and high-redundancy by using different propulsion systems on both port and starboard sides.
\nFigure 12 indicates the trends of investment cost and delivery schedule of LNG carriers of different propulsion system. During the 2000s, the average construction cost of LNG carrier kept within a narrow scope. The swift increase in demand for vessels using new propulsion technologies starting from 2014, particularly DFDE propulsion based vessels, pushed average construction costs to rise from $1300/m3 in 2005 to $1770/ m3 in 2014. This increase was mainly due to the icebreaker vessels in Yamal LNG project. Nevertheless, the costs for TFDE and ME-GI vessels in 2017 reduced to $1072/m3 and $1082/m3, respectively [18].
\nTrends of investment cost and delivery schedule [18].
In most cases, it takes 30–50 months to complete the construction of a vessel after the order is confirmed. However, the different type of propulsion system also affects the delivery schedule of the vessels. For example, when DFDE vessels were first ordered in the early 2000s, it takes longer time to delivery as shipyards need longer time to apply the new propulsion technology. The delivery time of DFDE carriers between 2006 and 2010 reached an average length of 50 months, but cut down to 37 months after 2010. If a sister ship is ordered, the delivery time can be reduced to within 24 months, because few modifications are required in design.
\nTrends of LNG spot charter rates are illustrated in Figure 13. During the most of 2017, spot charter rates kept a low level, approximately $23,500/day for conventional steam carriers and $37,000/day for DFDE carriers. The gap between charter rates for conventional steam carriers and DFDE carriers has remained because the larger and more fuel-efficient carriers are more preferred by the charterers. The charter rates of vessels equipped with ME-GI and X-DF propulsion systems are even higher than that of DFDE carriers as the newer technologies can offer increased efficiency. Remarkably, toward the end of the year, there was a significant increase in the charter rates. For conventional steam carriers, the charter rates reached an average $44,300/day, while the charter rates for DFDE carriers reached an average $81,700/day.
\nTrends of LNG spot charter rates [18].
The propulsion efficiency is calculated based on the thermal efficiency of the engine and the transmission efficiency of the components, as shown in Table 3. LSDF can achieve the efficiency nearly 50% owing to the high efficiency of 2-Stroke DF Engine and direct mechanical driving. The propulsion efficiency of UST, SSDR, DFDE and COGES has almost similar performance, ranging from 40 to 42%. The efficiency of SSD is reduced mainly due to extra power consumed by the re-liquefaction plant.
\nPropulsion efficiency of different propulsion options.
The comparison of emission performance of different propulsion system is illustrated in Figure 14 and Table 4. In terms of SOx emission, SSDR and ST have higher SOx emission since they burn the HFO purely and partially, respectively. DF engine’s SOx emissions are from sulfur in the pilot fuel and hence are much lower than SSDR and ST.
\nEmission performance of different propulsion options.
Fuel | \nDFDE | \nME-GI | \nX-DF | \nCOGES | \nSTaGE | \n
---|---|---|---|---|---|
LNG | \nIMO Tier III | \nIMO Tier II | \nIMO Tier III | \nIMO Tier III | \nIMO Tier III | \n
MGO | \nIMO Tier II | \nIMO Tier II | \nIMO Tier II | \nIMO Tier III | \nIMO Tier II | \n
Comparison of emission performance of different propulsion options [20].
In term of NOx emission, SSDR and LSDF-HP have relatively higher NOx emission. DFDE, ST and COGES release lower NOx missions. GT produces approx. 2–3 times NOx in comparison to ST. COGES can comply with Tier III in both gas and MGO mode [19].
\nBy comparing the order book and the active fleet, as shown in Figure 15, we can see that the orderbook reflects a variety of new propulsion systems, including LSDF(HP), LSDF(LP), UST and STaGE. The preferred option is shifted from DFDE to slow speed dual fuel engine, LSDF accounting for 57% of the orders while DFDE accounting for 28%. MAN ME-GI high pressure engines have evolved into a popular propulsion choice. WinGD X-DF low pressure technology has been gradually gaining ground recently. Improved steam propulsion, including UST and StaGE, have entered into the commercial arena.
\nDevelopment trends of propulsion system.
The economic market trends as well as global emission regulations are leading to diversified development of propulsion systems for LNG carriers.
The UST, improved based on the conventional ST, substantially increase the thermal efficiency and emission performance (approx. 15%).
LSDF(HP) featured with high fuel efficiency, free of knocking risk and negligible methane slip remains a popular propulsion option.
LSDF(LP) can offer relatively less capital cost and Tier III compliance, and thus has been gaining ground recently.
COGES can offer excellent emission performance and design & arrangement flexibility, the high capital cost, however, makes this technology being awaiting the first order.
STaGE, as a hybrid propulsion system combining UST and DFDE and providing high reliability and improve efficiency, has entered into the commercial arena.
In conclusion, there is not a unique optimum solution for the propulsion of LNG carriers. Each option has its advantages and disadvantages that must be evaluated before the selection of the propulsion plant for a specific project. Therefore, the decision for which propulsion system to be utilized, must be examined case by case, based on the specific size of the vessel, the operating profile (speed, trade mode and distance, use of natural BOG and forced BOG or BOG and fuel oil as add-on, or fuel oil only and BOG re-liquefaction, etc.), the fuel oil and LNG price trends and the availability of bunkers of the correct grade in the operating route, the initial cost and maintenance cost, the emission regulation compliance, the crew availability and so on.
\n\n American Bureau of Shipping boil-off gas brake mean effective pressure China Classification Society combined gas turbine electric & steam system conventional steam turbine dual fuel (medium-speed) diesel electric propulsion energy efficiency design index exhaust gas recirculation fuel gas supply system gas combustion unit gas turbine heavy fuel oil high pressure heat recovery steam generator International Association of Classification Societies international code for the construction and equipment of ships carrying liquefied gases in bulk liquefied natural gas liquefied natural gas carrier length over all low pressure low speed dual fuel marine diesel oil methane number selective catalytic reduction slow speed diesel with re-liquefaction plant steam turbine steam turbine and gas engine tri-fuel diesel electric propulsion ultra steam turbine
IntechOpen books are indexed by the following abstracting and indexing services:
",metaTitle:"Indexing and Abstracting",metaDescription:"IntechOpen was built by scientists, for scientists. We understand the community we serve, but to bring an even better service to the table for IntechOpen Authors and Academic Editors, we partnered with the leading companies and associations in the industry and beyond.",metaKeywords:null,canonicalURL:"/page/indexing-and-abstracting",contentRaw:'[{"type":"htmlEditorComponent","content":"Clarivate Web Of Science - Book Citation Index
\\n\\nCroatian Library (digital NSK)
\\n\\nOCLC (Online Computer Library Center) - WorldCat® Digital Collection Gateway
\\n\\n\\n\\n
\\n"}]'},components:[{type:"htmlEditorComponent",content:'
Clarivate Web Of Science - Book Citation Index
\n\nCroatian Library (digital NSK)
\n\nOCLC (Online Computer Library Center) - WorldCat® Digital Collection Gateway
\n\n\n\n
\n'}]},successStories:{items:[]},authorsAndEditors:{filterParams:{sort:"featured,name"},profiles:[{id:"6700",title:"Dr.",name:"Abbass A.",middleName:null,surname:"Hashim",slug:"abbass-a.-hashim",fullName:"Abbass A. Hashim",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/6700/images/1864_n.jpg",biography:"Currently I am carrying out research in several areas of interest, mainly covering work on chemical and bio-sensors, semiconductor thin film device fabrication and characterisation.\nAt the moment I have very strong interest in radiation environmental pollution and bacteriology treatment. The teams of researchers are working very hard to bring novel results in this field. I am also a member of the team in charge for the supervision of Ph.D. students in the fields of development of silicon based planar waveguide sensor devices, study of inelastic electron tunnelling in planar tunnelling nanostructures for sensing applications and development of organotellurium(IV) compounds for semiconductor applications. I am a specialist in data analysis techniques and nanosurface structure. I have served as the editor for many books, been a member of the editorial board in science journals, have published many papers and hold many patents.",institutionString:null,institution:{name:"Sheffield Hallam University",country:{name:"United Kingdom"}}},{id:"54525",title:"Prof.",name:"Abdul Latif",middleName:null,surname:"Ahmad",slug:"abdul-latif-ahmad",fullName:"Abdul Latif Ahmad",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"20567",title:"Prof.",name:"Ado",middleName:null,surname:"Jorio",slug:"ado-jorio",fullName:"Ado Jorio",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Universidade Federal de Minas Gerais",country:{name:"Brazil"}}},{id:"47940",title:"Dr.",name:"Alberto",middleName:null,surname:"Mantovani",slug:"alberto-mantovani",fullName:"Alberto Mantovani",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"12392",title:"Mr.",name:"Alex",middleName:null,surname:"Lazinica",slug:"alex-lazinica",fullName:"Alex Lazinica",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/12392/images/7282_n.png",biography:"Alex Lazinica is the founder and CEO of IntechOpen. After obtaining a Master's degree in Mechanical Engineering, he continued his PhD studies in Robotics at the Vienna University of Technology. Here he worked as a robotic researcher with the university's Intelligent Manufacturing Systems Group as well as a guest researcher at various European universities, including the Swiss Federal Institute of Technology Lausanne (EPFL). During this time he published more than 20 scientific papers, gave presentations, served as a reviewer for major robotic journals and conferences and most importantly he co-founded and built the International Journal of Advanced Robotic Systems- world's first Open Access journal in the field of robotics. Starting this journal was a pivotal point in his career, since it was a pathway to founding IntechOpen - Open Access publisher focused on addressing academic researchers needs. Alex is a personification of IntechOpen key values being trusted, open and entrepreneurial. Today his focus is on defining the growth and development strategy for the company.",institutionString:null,institution:{name:"TU Wien",country:{name:"Austria"}}},{id:"19816",title:"Prof.",name:"Alexander",middleName:null,surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/19816/images/1607_n.jpg",biography:"Alexander I. Kokorin: born: 1947, Moscow; DSc., PhD; Principal Research Fellow (Research Professor) of Department of Kinetics and Catalysis, N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, Moscow.\r\nArea of research interests: physical chemistry of complex-organized molecular and nanosized systems, including polymer-metal complexes; the surface of doped oxide semiconductors. He is an expert in structural, absorptive, catalytic and photocatalytic properties, in structural organization and dynamic features of ionic liquids, in magnetic interactions between paramagnetic centers. The author or co-author of 3 books, over 200 articles and reviews in scientific journals and books. He is an actual member of the International EPR/ESR Society, European Society on Quantum Solar Energy Conversion, Moscow House of Scientists, of the Board of Moscow Physical Society.",institutionString:null,institution:{name:"Semenov Institute of Chemical Physics",country:{name:"Russia"}}},{id:"62389",title:"PhD.",name:"Ali Demir",middleName:null,surname:"Sezer",slug:"ali-demir-sezer",fullName:"Ali Demir Sezer",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/62389/images/3413_n.jpg",biography:"Dr. Ali Demir Sezer has a Ph.D. from Pharmaceutical Biotechnology at the Faculty of Pharmacy, University of Marmara (Turkey). He is the member of many Pharmaceutical Associations and acts as a reviewer of scientific journals and European projects under different research areas such as: drug delivery systems, nanotechnology and pharmaceutical biotechnology. Dr. Sezer is the author of many scientific publications in peer-reviewed journals and poster communications. Focus of his research activity is drug delivery, physico-chemical characterization and biological evaluation of biopolymers micro and nanoparticles as modified drug delivery system, and colloidal drug carriers (liposomes, nanoparticles etc.).",institutionString:null,institution:{name:"Marmara University",country:{name:"Turkey"}}},{id:"61051",title:"Prof.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"100762",title:"Prof.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"St David's Medical Center",country:{name:"United States of America"}}},{id:"107416",title:"Dr.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Texas Cardiac Arrhythmia",country:{name:"United States of America"}}},{id:"64434",title:"Dr.",name:"Angkoon",middleName:null,surname:"Phinyomark",slug:"angkoon-phinyomark",fullName:"Angkoon Phinyomark",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/64434/images/2619_n.jpg",biography:"My name is Angkoon Phinyomark. I received a B.Eng. degree in Computer Engineering with First Class Honors in 2008 from Prince of Songkla University, Songkhla, Thailand, where I received a Ph.D. degree in Electrical Engineering. My research interests are primarily in the area of biomedical signal processing and classification notably EMG (electromyography signal), EOG (electrooculography signal), and EEG (electroencephalography signal), image analysis notably breast cancer analysis and optical coherence tomography, and rehabilitation engineering. I became a student member of IEEE in 2008. During October 2011-March 2012, I had worked at School of Computer Science and Electronic Engineering, University of Essex, Colchester, Essex, United Kingdom. In addition, during a B.Eng. I had been a visiting research student at Faculty of Computer Science, University of Murcia, Murcia, Spain for three months.\n\nI have published over 40 papers during 5 years in refereed journals, books, and conference proceedings in the areas of electro-physiological signals processing and classification, notably EMG and EOG signals, fractal analysis, wavelet analysis, texture analysis, feature extraction and machine learning algorithms, and assistive and rehabilitative devices. I have several computer programming language certificates, i.e. Sun Certified Programmer for the Java 2 Platform 1.4 (SCJP), Microsoft Certified Professional Developer, Web Developer (MCPD), Microsoft Certified Technology Specialist, .NET Framework 2.0 Web (MCTS). I am a Reviewer for several refereed journals and international conferences, such as IEEE Transactions on Biomedical Engineering, IEEE Transactions on Industrial Electronics, Optic Letters, Measurement Science Review, and also a member of the International Advisory Committee for 2012 IEEE Business Engineering and Industrial Applications and 2012 IEEE Symposium on Business, Engineering and Industrial Applications.",institutionString:null,institution:{name:"Joseph Fourier University",country:{name:"France"}}},{id:"55578",title:"Dr.",name:"Antonio",middleName:null,surname:"Jurado-Navas",slug:"antonio-jurado-navas",fullName:"Antonio Jurado-Navas",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/55578/images/4574_n.png",biography:"Antonio Jurado-Navas received the M.S. degree (2002) and the Ph.D. degree (2009) in Telecommunication Engineering, both from the University of Málaga (Spain). He first worked as a consultant at Vodafone-Spain. From 2004 to 2011, he was a Research Assistant with the Communications Engineering Department at the University of Málaga. In 2011, he became an Assistant Professor in the same department. From 2012 to 2015, he was with Ericsson Spain, where he was working on geo-location\ntools for third generation mobile networks. Since 2015, he is a Marie-Curie fellow at the Denmark Technical University. His current research interests include the areas of mobile communication systems and channel modeling in addition to atmospheric optical communications, adaptive optics and statistics",institutionString:null,institution:{name:"University of Malaga",country:{name:"Spain"}}}],filtersByRegion:[{group:"region",caption:"North America",value:1,count:5698},{group:"region",caption:"Middle and South America",value:2,count:5172},{group:"region",caption:"Africa",value:3,count:1689},{group:"region",caption:"Asia",value:4,count:10243},{group:"region",caption:"Australia and Oceania",value:5,count:888},{group:"region",caption:"Europe",value:6,count:15647}],offset:12,limit:12,total:117315},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{sort:"dateendthirdsteppublish"},books:[],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:9},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:18},{group:"topic",caption:"Business, Management and Economics",value:7,count:2},{group:"topic",caption:"Chemistry",value:8,count:7},{group:"topic",caption:"Computer and Information Science",value:9,count:11},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:5},{group:"topic",caption:"Engineering",value:11,count:15},{group:"topic",caption:"Environmental Sciences",value:12,count:2},{group:"topic",caption:"Immunology and Microbiology",value:13,count:5},{group:"topic",caption:"Materials Science",value:14,count:4},{group:"topic",caption:"Mathematics",value:15,count:1},{group:"topic",caption:"Medicine",value:16,count:62},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:1},{group:"topic",caption:"Neuroscience",value:18,count:1},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:6},{group:"topic",caption:"Physics",value:20,count:2},{group:"topic",caption:"Psychology",value:21,count:3},{group:"topic",caption:"Robotics",value:22,count:1},{group:"topic",caption:"Social Sciences",value:23,count:3},{group:"topic",caption:"Technology",value:24,count:1},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:2}],offset:0,limit:12,total:null},popularBooks:{featuredBooks:[{type:"book",id:"7802",title:"Modern Slavery and Human Trafficking",subtitle:null,isOpenForSubmission:!1,hash:"587a0b7fb765f31cc98de33c6c07c2e0",slug:"modern-slavery-and-human-trafficking",bookSignature:"Jane Reeves",coverURL:"https://cdn.intechopen.com/books/images_new/7802.jpg",editors:[{id:"211328",title:"Prof.",name:"Jane",middleName:null,surname:"Reeves",slug:"jane-reeves",fullName:"Jane Reeves"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8545",title:"Animal Reproduction in Veterinary Medicine",subtitle:null,isOpenForSubmission:!1,hash:"13aaddf5fdbbc78387e77a7da2388bf6",slug:"animal-reproduction-in-veterinary-medicine",bookSignature:"Faruk Aral, Rita Payan-Carreira and Miguel Quaresma",coverURL:"https://cdn.intechopen.com/books/images_new/8545.jpg",editors:[{id:"25600",title:"Prof.",name:"Faruk",middleName:null,surname:"Aral",slug:"faruk-aral",fullName:"Faruk Aral"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9961",title:"Data Mining",subtitle:"Methods, Applications and Systems",isOpenForSubmission:!1,hash:"ed79fb6364f2caf464079f94a0387146",slug:"data-mining-methods-applications-and-systems",bookSignature:"Derya Birant",coverURL:"https://cdn.intechopen.com/books/images_new/9961.jpg",editors:[{id:"15609",title:"Dr.",name:"Derya",middleName:null,surname:"Birant",slug:"derya-birant",fullName:"Derya Birant"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9157",title:"Neurodegenerative Diseases",subtitle:"Molecular Mechanisms and Current Therapeutic Approaches",isOpenForSubmission:!1,hash:"bc8be577966ef88735677d7e1e92ed28",slug:"neurodegenerative-diseases-molecular-mechanisms-and-current-therapeutic-approaches",bookSignature:"Nagehan Ersoy Tunalı",coverURL:"https://cdn.intechopen.com/books/images_new/9157.jpg",editors:[{id:"82778",title:"Ph.D.",name:"Nagehan",middleName:null,surname:"Ersoy Tunalı",slug:"nagehan-ersoy-tunali",fullName:"Nagehan Ersoy Tunalı"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8686",title:"Direct Torque Control Strategies of Electrical Machines",subtitle:null,isOpenForSubmission:!1,hash:"b6ad22b14db2b8450228545d3d4f6b1a",slug:"direct-torque-control-strategies-of-electrical-machines",bookSignature:"Fatma Ben Salem",coverURL:"https://cdn.intechopen.com/books/images_new/8686.jpg",editors:[{id:"295623",title:"Associate Prof.",name:"Fatma",middleName:null,surname:"Ben Salem",slug:"fatma-ben-salem",fullName:"Fatma Ben Salem"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7434",title:"Molecular Biotechnology",subtitle:null,isOpenForSubmission:!1,hash:"eceede809920e1ec7ecadd4691ede2ec",slug:"molecular-biotechnology",bookSignature:"Sergey Sedykh",coverURL:"https://cdn.intechopen.com/books/images_new/7434.jpg",editors:[{id:"178316",title:"Ph.D.",name:"Sergey",middleName:null,surname:"Sedykh",slug:"sergey-sedykh",fullName:"Sergey Sedykh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9839",title:"Outdoor Recreation",subtitle:"Physiological and Psychological Effects on Health",isOpenForSubmission:!1,hash:"5f5a0d64267e32567daffa5b0c6a6972",slug:"outdoor-recreation-physiological-and-psychological-effects-on-health",bookSignature:"Hilde G. Nielsen",coverURL:"https://cdn.intechopen.com/books/images_new/9839.jpg",editors:[{id:"158692",title:"Ph.D.",name:"Hilde G.",middleName:null,surname:"Nielsen",slug:"hilde-g.-nielsen",fullName:"Hilde G. Nielsen"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9208",title:"Welding",subtitle:"Modern Topics",isOpenForSubmission:!1,hash:"7d6be076ccf3a3f8bd2ca52d86d4506b",slug:"welding-modern-topics",bookSignature:"Sadek Crisóstomo Absi Alfaro, Wojciech Borek and Błażej Tomiczek",coverURL:"https://cdn.intechopen.com/books/images_new/9208.jpg",editors:[{id:"65292",title:"Prof.",name:"Sadek Crisostomo Absi",middleName:"C. Absi",surname:"Alfaro",slug:"sadek-crisostomo-absi-alfaro",fullName:"Sadek Crisostomo Absi Alfaro"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9139",title:"Topics in Primary Care Medicine",subtitle:null,isOpenForSubmission:!1,hash:"ea774a4d4c1179da92a782e0ae9cde92",slug:"topics-in-primary-care-medicine",bookSignature:"Thomas F. Heston",coverURL:"https://cdn.intechopen.com/books/images_new/9139.jpg",editors:[{id:"217926",title:"Dr.",name:"Thomas F.",middleName:null,surname:"Heston",slug:"thomas-f.-heston",fullName:"Thomas F. Heston"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9343",title:"Trace Metals in the Environment",subtitle:"New Approaches and Recent Advances",isOpenForSubmission:!1,hash:"ae07e345bc2ce1ebbda9f70c5cd12141",slug:"trace-metals-in-the-environment-new-approaches-and-recent-advances",bookSignature:"Mario Alfonso Murillo-Tovar, Hugo Saldarriaga-Noreña and Agnieszka Saeid",coverURL:"https://cdn.intechopen.com/books/images_new/9343.jpg",editors:[{id:"255959",title:"Dr.",name:"Mario Alfonso",middleName:null,surname:"Murillo-Tovar",slug:"mario-alfonso-murillo-tovar",fullName:"Mario Alfonso Murillo-Tovar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8697",title:"Virtual Reality and Its Application in Education",subtitle:null,isOpenForSubmission:!1,hash:"ee01b5e387ba0062c6b0d1e9227bda05",slug:"virtual-reality-and-its-application-in-education",bookSignature:"Dragan Cvetković",coverURL:"https://cdn.intechopen.com/books/images_new/8697.jpg",editors:[{id:"101330",title:"Dr.",name:"Dragan",middleName:"Mladen",surname:"Cvetković",slug:"dragan-cvetkovic",fullName:"Dragan Cvetković"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7831",title:"Sustainability in Urban Planning and Design",subtitle:null,isOpenForSubmission:!1,hash:"c924420492c8c2c9751e178d025f4066",slug:"sustainability-in-urban-planning-and-design",bookSignature:"Amjad Almusaed, Asaad Almssad and Linh Truong - Hong",coverURL:"https://cdn.intechopen.com/books/images_new/7831.jpg",editors:[{id:"110471",title:"Dr.",name:"Amjad",middleName:"Zaki",surname:"Almusaed",slug:"amjad-almusaed",fullName:"Amjad Almusaed"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:12,limit:12,total:5141},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"9208",title:"Welding",subtitle:"Modern Topics",isOpenForSubmission:!1,hash:"7d6be076ccf3a3f8bd2ca52d86d4506b",slug:"welding-modern-topics",bookSignature:"Sadek Crisóstomo Absi Alfaro, Wojciech Borek and Błażej Tomiczek",coverURL:"https://cdn.intechopen.com/books/images_new/9208.jpg",editors:[{id:"65292",title:"Prof.",name:"Sadek Crisostomo Absi",middleName:"C. Absi",surname:"Alfaro",slug:"sadek-crisostomo-absi-alfaro",fullName:"Sadek Crisostomo Absi Alfaro"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9139",title:"Topics in Primary Care Medicine",subtitle:null,isOpenForSubmission:!1,hash:"ea774a4d4c1179da92a782e0ae9cde92",slug:"topics-in-primary-care-medicine",bookSignature:"Thomas F. Heston",coverURL:"https://cdn.intechopen.com/books/images_new/9139.jpg",editors:[{id:"217926",title:"Dr.",name:"Thomas F.",middleName:null,surname:"Heston",slug:"thomas-f.-heston",fullName:"Thomas F. Heston"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8697",title:"Virtual Reality and Its Application in Education",subtitle:null,isOpenForSubmission:!1,hash:"ee01b5e387ba0062c6b0d1e9227bda05",slug:"virtual-reality-and-its-application-in-education",bookSignature:"Dragan Cvetković",coverURL:"https://cdn.intechopen.com/books/images_new/8697.jpg",editors:[{id:"101330",title:"Dr.",name:"Dragan",middleName:"Mladen",surname:"Cvetković",slug:"dragan-cvetkovic",fullName:"Dragan Cvetković"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9343",title:"Trace Metals in the Environment",subtitle:"New Approaches and Recent Advances",isOpenForSubmission:!1,hash:"ae07e345bc2ce1ebbda9f70c5cd12141",slug:"trace-metals-in-the-environment-new-approaches-and-recent-advances",bookSignature:"Mario Alfonso Murillo-Tovar, Hugo Saldarriaga-Noreña and Agnieszka Saeid",coverURL:"https://cdn.intechopen.com/books/images_new/9343.jpg",editors:[{id:"255959",title:"Dr.",name:"Mario Alfonso",middleName:null,surname:"Murillo-Tovar",slug:"mario-alfonso-murillo-tovar",fullName:"Mario Alfonso Murillo-Tovar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9785",title:"Endometriosis",subtitle:null,isOpenForSubmission:!1,hash:"f457ca61f29cf7e8bc191732c50bb0ce",slug:"endometriosis",bookSignature:"Courtney Marsh",coverURL:"https://cdn.intechopen.com/books/images_new/9785.jpg",editors:[{id:"255491",title:"Dr.",name:"Courtney",middleName:null,surname:"Marsh",slug:"courtney-marsh",fullName:"Courtney Marsh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7831",title:"Sustainability in Urban Planning and Design",subtitle:null,isOpenForSubmission:!1,hash:"c924420492c8c2c9751e178d025f4066",slug:"sustainability-in-urban-planning-and-design",bookSignature:"Amjad Almusaed, Asaad Almssad and Linh Truong - Hong",coverURL:"https://cdn.intechopen.com/books/images_new/7831.jpg",editors:[{id:"110471",title:"Dr.",name:"Amjad",middleName:"Zaki",surname:"Almusaed",slug:"amjad-almusaed",fullName:"Amjad Almusaed"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9376",title:"Contemporary Developments and Perspectives in International Health Security",subtitle:"Volume 1",isOpenForSubmission:!1,hash:"b9a00b84cd04aae458fb1d6c65795601",slug:"contemporary-developments-and-perspectives-in-international-health-security-volume-1",bookSignature:"Stanislaw P. Stawicki, Michael S. Firstenberg, Sagar C. Galwankar, Ricardo Izurieta and Thomas Papadimos",coverURL:"https://cdn.intechopen.com/books/images_new/9376.jpg",editors:[{id:"181694",title:"Dr.",name:"Stanislaw P.",middleName:null,surname:"Stawicki",slug:"stanislaw-p.-stawicki",fullName:"Stanislaw P. Stawicki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7769",title:"Medical Isotopes",subtitle:null,isOpenForSubmission:!1,hash:"f8d3c5a6c9a42398e56b4e82264753f7",slug:"medical-isotopes",bookSignature:"Syed Ali Raza Naqvi and Muhammad Babar Imrani",coverURL:"https://cdn.intechopen.com/books/images_new/7769.jpg",editors:[{id:"259190",title:"Dr.",name:"Syed Ali Raza",middleName:null,surname:"Naqvi",slug:"syed-ali-raza-naqvi",fullName:"Syed Ali Raza Naqvi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9279",title:"Concepts, Applications and Emerging Opportunities in Industrial Engineering",subtitle:null,isOpenForSubmission:!1,hash:"9bfa87f9b627a5468b7c1e30b0eea07a",slug:"concepts-applications-and-emerging-opportunities-in-industrial-engineering",bookSignature:"Gary Moynihan",coverURL:"https://cdn.intechopen.com/books/images_new/9279.jpg",editors:[{id:"16974",title:"Dr.",name:"Gary",middleName:null,surname:"Moynihan",slug:"gary-moynihan",fullName:"Gary Moynihan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7807",title:"A Closer Look at Organizational Culture in Action",subtitle:null,isOpenForSubmission:!1,hash:"05c608b9271cc2bc711f4b28748b247b",slug:"a-closer-look-at-organizational-culture-in-action",bookSignature:"Süleyman Davut Göker",coverURL:"https://cdn.intechopen.com/books/images_new/7807.jpg",editors:[{id:"190035",title:"Associate Prof.",name:"Süleyman Davut",middleName:null,surname:"Göker",slug:"suleyman-davut-goker",fullName:"Süleyman Davut Göker"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"7434",title:"Molecular Biotechnology",subtitle:null,isOpenForSubmission:!1,hash:"eceede809920e1ec7ecadd4691ede2ec",slug:"molecular-biotechnology",bookSignature:"Sergey Sedykh",coverURL:"https://cdn.intechopen.com/books/images_new/7434.jpg",editedByType:"Edited by",editors:[{id:"178316",title:"Ph.D.",name:"Sergey",middleName:null,surname:"Sedykh",slug:"sergey-sedykh",fullName:"Sergey Sedykh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8545",title:"Animal Reproduction in Veterinary Medicine",subtitle:null,isOpenForSubmission:!1,hash:"13aaddf5fdbbc78387e77a7da2388bf6",slug:"animal-reproduction-in-veterinary-medicine",bookSignature:"Faruk Aral, Rita Payan-Carreira and Miguel Quaresma",coverURL:"https://cdn.intechopen.com/books/images_new/8545.jpg",editedByType:"Edited by",editors:[{id:"25600",title:"Prof.",name:"Faruk",middleName:null,surname:"Aral",slug:"faruk-aral",fullName:"Faruk Aral"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9569",title:"Methods in Molecular Medicine",subtitle:null,isOpenForSubmission:!1,hash:"691d3f3c4ac25a8093414e9b270d2843",slug:"methods-in-molecular-medicine",bookSignature:"Yusuf Tutar",coverURL:"https://cdn.intechopen.com/books/images_new/9569.jpg",editedByType:"Edited by",editors:[{id:"158492",title:"Prof.",name:"Yusuf",middleName:null,surname:"Tutar",slug:"yusuf-tutar",fullName:"Yusuf Tutar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9839",title:"Outdoor Recreation",subtitle:"Physiological and Psychological Effects on Health",isOpenForSubmission:!1,hash:"5f5a0d64267e32567daffa5b0c6a6972",slug:"outdoor-recreation-physiological-and-psychological-effects-on-health",bookSignature:"Hilde G. Nielsen",coverURL:"https://cdn.intechopen.com/books/images_new/9839.jpg",editedByType:"Edited by",editors:[{id:"158692",title:"Ph.D.",name:"Hilde G.",middleName:null,surname:"Nielsen",slug:"hilde-g.-nielsen",fullName:"Hilde G. Nielsen"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7802",title:"Modern Slavery and Human Trafficking",subtitle:null,isOpenForSubmission:!1,hash:"587a0b7fb765f31cc98de33c6c07c2e0",slug:"modern-slavery-and-human-trafficking",bookSignature:"Jane Reeves",coverURL:"https://cdn.intechopen.com/books/images_new/7802.jpg",editedByType:"Edited by",editors:[{id:"211328",title:"Prof.",name:"Jane",middleName:null,surname:"Reeves",slug:"jane-reeves",fullName:"Jane Reeves"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8063",title:"Food Security in Africa",subtitle:null,isOpenForSubmission:!1,hash:"8cbf3d662b104d19db2efc9d59249efc",slug:"food-security-in-africa",bookSignature:"Barakat Mahmoud",coverURL:"https://cdn.intechopen.com/books/images_new/8063.jpg",editedByType:"Edited by",editors:[{id:"92016",title:"Dr.",name:"Barakat",middleName:null,surname:"Mahmoud",slug:"barakat-mahmoud",fullName:"Barakat Mahmoud"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10118",title:"Plant Stress Physiology",subtitle:null,isOpenForSubmission:!1,hash:"c68b09d2d2634fc719ae3b9a64a27839",slug:"plant-stress-physiology",bookSignature:"Akbar Hossain",coverURL:"https://cdn.intechopen.com/books/images_new/10118.jpg",editedByType:"Edited by",editors:[{id:"280755",title:"Dr.",name:"Akbar",middleName:null,surname:"Hossain",slug:"akbar-hossain",fullName:"Akbar Hossain"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9157",title:"Neurodegenerative Diseases",subtitle:"Molecular Mechanisms and Current Therapeutic Approaches",isOpenForSubmission:!1,hash:"bc8be577966ef88735677d7e1e92ed28",slug:"neurodegenerative-diseases-molecular-mechanisms-and-current-therapeutic-approaches",bookSignature:"Nagehan Ersoy Tunalı",coverURL:"https://cdn.intechopen.com/books/images_new/9157.jpg",editedByType:"Edited by",editors:[{id:"82778",title:"Ph.D.",name:"Nagehan",middleName:null,surname:"Ersoy Tunalı",slug:"nagehan-ersoy-tunali",fullName:"Nagehan Ersoy Tunalı"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9961",title:"Data Mining",subtitle:"Methods, Applications and Systems",isOpenForSubmission:!1,hash:"ed79fb6364f2caf464079f94a0387146",slug:"data-mining-methods-applications-and-systems",bookSignature:"Derya Birant",coverURL:"https://cdn.intechopen.com/books/images_new/9961.jpg",editedByType:"Edited by",editors:[{id:"15609",title:"Dr.",name:"Derya",middleName:null,surname:"Birant",slug:"derya-birant",fullName:"Derya Birant"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8686",title:"Direct Torque Control Strategies of Electrical Machines",subtitle:null,isOpenForSubmission:!1,hash:"b6ad22b14db2b8450228545d3d4f6b1a",slug:"direct-torque-control-strategies-of-electrical-machines",bookSignature:"Fatma Ben Salem",coverURL:"https://cdn.intechopen.com/books/images_new/8686.jpg",editedByType:"Edited by",editors:[{id:"295623",title:"Associate Prof.",name:"Fatma",middleName:null,surname:"Ben Salem",slug:"fatma-ben-salem",fullName:"Fatma Ben Salem"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"949",title:"Solid Mechanics",slug:"solid-mechanics",parent:{title:"Metals and Nonmetals",slug:"metals-and-nonmetals"},numberOfBooks:6,numberOfAuthorsAndEditors:169,numberOfWosCitations:179,numberOfCrossrefCitations:85,numberOfDimensionsCitations:249,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicSlug:"solid-mechanics",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"6234",title:"Contact and Fracture Mechanics",subtitle:null,isOpenForSubmission:!1,hash:"2625b0c2edba9239b4f1b07e20fb8d70",slug:"contact-and-fracture-mechanics",bookSignature:"Pranav H. Darji and Veera P. Darji",coverURL:"https://cdn.intechopen.com/books/images_new/6234.jpg",editedByType:"Edited by",editors:[{id:"141348",title:"Dr.",name:"Pranav H.",middleName:null,surname:"Darji",slug:"pranav-h.-darji",fullName:"Pranav H. Darji"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5983",title:"Severe Plastic Deformation Techniques",subtitle:null,isOpenForSubmission:!1,hash:"859d778bfff0b9e24c7ff6360a164c8c",slug:"severe-plastic-deformation-techniques",bookSignature:"Marcello Cabibbo",coverURL:"https://cdn.intechopen.com/books/images_new/5983.jpg",editedByType:"Edited by",editors:[{id:"180609",title:"Prof.",name:"Marcello",middleName:null,surname:"Cabibbo",slug:"marcello-cabibbo",fullName:"Marcello Cabibbo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5474",title:"Study of Grain Boundary Character",subtitle:null,isOpenForSubmission:!1,hash:"591ee927a4e438667ce39c8251cdacfa",slug:"study-of-grain-boundary-character",bookSignature:"Tomasz Tanski and Wojciech Borek",coverURL:"https://cdn.intechopen.com/books/images_new/5474.jpg",editedByType:"Edited by",editors:[{id:"15700",title:"Prof.",name:"Tomasz Arkadiusz",middleName:null,surname:"Tański",slug:"tomasz-arkadiusz-tanski",fullName:"Tomasz Arkadiusz Tański"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"2800",title:"Nanoindentation in Materials Science",subtitle:null,isOpenForSubmission:!1,hash:"bf2cff0c009d78d80db94161ef08c8ca",slug:"nanoindentation-in-materials-science",bookSignature:"Jiri Nemecek",coverURL:"https://cdn.intechopen.com/books/images_new/2800.jpg",editedByType:"Edited by",editors:[{id:"136403",title:"Dr.",name:"Jiri",middleName:null,surname:"Nemecek",slug:"jiri-nemecek",fullName:"Jiri Nemecek"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1380",title:"Corrosion Resistance",subtitle:null,isOpenForSubmission:!1,hash:"07e772d5bde6effcc31982a3f4fc0038",slug:"corrosion-resistance",bookSignature:"Hong Shih",coverURL:"https://cdn.intechopen.com/books/images_new/1380.jpg",editedByType:"Edited by",editors:[{id:"89658",title:"Dr",name:null,middleName:null,surname:"Shih",slug:"shih",fullName:"Shih"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1379",title:"Recent Researches in Corrosion Evaluation and Protection",subtitle:null,isOpenForSubmission:!1,hash:"391f1fb716c1a300e76e61f387901dc9",slug:"recent-researches-in-corrosion-evaluation-and-protection",bookSignature:"Reza Shoja Razavi",coverURL:"https://cdn.intechopen.com/books/images_new/1379.jpg",editedByType:"Edited by",editors:[{id:"31536",title:"Prof.",name:"Reza",middleName:null,surname:"Shoja Razavi",slug:"reza-shoja-razavi",fullName:"Reza Shoja Razavi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:6,mostCitedChapters:[{id:"26668",doi:"10.5772/33844",title:"Use of Electrochemical Impedance Spectroscopy (EIS) for the Evaluation of Electrocoatings Performances",slug:"use-of-electrochemical-impedance-spectroscopy-eis-for-the-evaluation-of-electrocoatings-performances",totalDownloads:7864,totalCrossrefCites:8,totalDimensionsCites:25,book:{slug:"recent-researches-in-corrosion-evaluation-and-protection",title:"Recent Researches in Corrosion Evaluation and Protection",fullTitle:"Recent Researches in Corrosion Evaluation and Protection"},signatures:"Marie-Georges Olivier and Mireille Poelman",authors:[{id:"97361",title:"Prof.",name:"Marie-Georges",middleName:null,surname:"Olivier",slug:"marie-georges-olivier",fullName:"Marie-Georges Olivier"},{id:"100581",title:"Dr.",name:"Mireille",middleName:null,surname:"Poelman",slug:"mireille-poelman",fullName:"Mireille Poelman"}]},{id:"34482",doi:"10.5772/35634",title:"Tribocorrosion: Material Behavior Under Combined Conditions of Corrosion and Mechanical Loading",slug:"tribocorrosion-material-behaviour-under-combined-conditions-of-corrosion-and-mechanical-loading",totalDownloads:3515,totalCrossrefCites:6,totalDimensionsCites:17,book:{slug:"corrosion-resistance",title:"Corrosion Resistance",fullTitle:"Corrosion Resistance"},signatures:"Pierre Ponthiaux, François Wenger and Jean-Pierre Celis",authors:[{id:"105257",title:"Prof.",name:"Jean Pierre",middleName:null,surname:"Celis",slug:"jean-pierre-celis",fullName:"Jean Pierre Celis"},{id:"105319",title:"Prof.",name:"Pierre",middleName:null,surname:"Ponthiaux",slug:"pierre-ponthiaux",fullName:"Pierre Ponthiaux"},{id:"105320",title:"Prof.",name:"François",middleName:null,surname:"Wenger",slug:"francois-wenger",fullName:"François Wenger"}]},{id:"40035",doi:"10.5772/50002",title:"Uncertainties and Errors in Nanoindentation",slug:"uncertainties-and-errors-in-nanoindentation",totalDownloads:3670,totalCrossrefCites:8,totalDimensionsCites:16,book:{slug:"nanoindentation-in-materials-science",title:"Nanoindentation in Materials Science",fullTitle:"Nanoindentation in Materials Science"},signatures:"Jaroslav Menčík",authors:[{id:"142710",title:"Prof.",name:"Jaroslav",middleName:null,surname:"Menčík",slug:"jaroslav-mencik",fullName:"Jaroslav Menčík"}]}],mostDownloadedChaptersLast30Days:[{id:"40036",title:"Nanoindentation as a Tool to Clarify the Mechanism Causing Variable Stiffness of a Silane Layer on Diamond",slug:"nanoindentation-as-a-tool-to-clarify-the-mechanism-causing-variable-stiffness-of-a-silane-layer-on-d",totalDownloads:1588,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"nanoindentation-in-materials-science",title:"Nanoindentation in Materials Science",fullTitle:"Nanoindentation in Materials Science"},signatures:"Ksenia Shcherbakova, Akiko Hatakeyama, Yosuke Amemiya and Nobuo Shimamoto",authors:[{id:"140148",title:"Dr.",name:"Nobuo",middleName:null,surname:"Shimamoto",slug:"nobuo-shimamoto",fullName:"Nobuo Shimamoto"},{id:"154607",title:"MSc.",name:"Ksenia",middleName:null,surname:"Shcherbakova",slug:"ksenia-shcherbakova",fullName:"Ksenia Shcherbakova"},{id:"154608",title:"Dr.",name:"Yosuke",middleName:null,surname:"Amemiya",slug:"yosuke-amemiya",fullName:"Yosuke Amemiya"},{id:"154609",title:"Dr.",name:"Akiko",middleName:null,surname:"Hatakeyama",slug:"akiko-hatakeyama",fullName:"Akiko Hatakeyama"}]},{id:"34479",title:"A Systematic Study and Characterization of Advanced Corrosion Resistance Materials and Their Applications for Plasma Etching Processes in Semiconductor Silicon Wafer Fabrication",slug:"a-systematic-study-and-characterization-of-advanced-corrosion-resistance-materials-and-their-applica",totalDownloads:11365,totalCrossrefCites:1,totalDimensionsCites:2,book:{slug:"corrosion-resistance",title:"Corrosion Resistance",fullTitle:"Corrosion Resistance"},signatures:"Hong Shih",authors:[{id:"89658",title:"Dr",name:null,middleName:null,surname:"Shih",slug:"shih",fullName:"Shih"}]},{id:"58051",title:"Numerical Analysis Methods of Structural Fatigue and Fracture Problems",slug:"numerical-analysis-methods-of-structural-fatigue-and-fracture-problems",totalDownloads:670,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"contact-and-fracture-mechanics",title:"Contact and Fracture Mechanics",fullTitle:"Contact and Fracture Mechanics"},signatures:"Qiu Zhiping, Zhang Zesheng and Wang Lei",authors:[{id:"196882",title:"Prof.",name:"Zhiping",middleName:null,surname:"Qiu",slug:"zhiping-qiu",fullName:"Zhiping Qiu"},{id:"198421",title:"Dr.",name:"Lei",middleName:null,surname:"Wang",slug:"lei-wang",fullName:"Lei Wang"},{id:"223109",title:"Mr.",name:"Zesheng",middleName:null,surname:"Zhang",slug:"zesheng-zhang",fullName:"Zesheng Zhang"}]},{id:"56456",title:"Innovative Applications of Ultrafine-Grained Materials",slug:"innovative-applications-of-ultrafine-grained-materials",totalDownloads:1157,totalCrossrefCites:1,totalDimensionsCites:1,book:{slug:"severe-plastic-deformation-techniques",title:"Severe Plastic Deformation Techniques",fullTitle:"Severe Plastic Deformation Techniques"},signatures:"Jie Xu, Bin Guo and Debin Shan",authors:[{id:"202981",title:"Associate Prof.",name:"Jie",middleName:null,surname:"Xu",slug:"jie-xu",fullName:"Jie Xu"},{id:"202990",title:"Prof.",name:"Bin",middleName:null,surname:"Guo",slug:"bin-guo",fullName:"Bin Guo"},{id:"202991",title:"Prof.",name:"Debin",middleName:null,surname:"Shan",slug:"debin-shan",fullName:"Debin Shan"}]},{id:"55117",title:"Ultrafine-Grained Materials Fabrication with High Pressure Torsion and Simulation of Plastic Deformation Inhomogeneous Characteristics",slug:"ultrafine-grained-materials-fabrication-with-high-pressure-torsion-and-simulation-of-plastic-deforma",totalDownloads:1132,totalCrossrefCites:0,totalDimensionsCites:1,book:{slug:"severe-plastic-deformation-techniques",title:"Severe Plastic Deformation Techniques",fullTitle:"Severe Plastic Deformation Techniques"},signatures:"Yuepeng Song, Wenke Wang, Miaomiao Chen, Jing Guo, Lingfeng\nXu, Dongsheng Gao and Hyoung Seop Kim",authors:[{id:"201882",title:"Prof.",name:"Yuepeng",middleName:null,surname:"Song",slug:"yuepeng-song",fullName:"Yuepeng Song"},{id:"205676",title:"Prof.",name:"Hyoungseop",middleName:null,surname:"Kim",slug:"hyoungseop-kim",fullName:"Hyoungseop Kim"}]},{id:"58988",title:"Fracture Toughness Determination with the Use of Miniaturized Specimens",slug:"fracture-toughness-determination-with-the-use-of-miniaturized-specimens",totalDownloads:948,totalCrossrefCites:1,totalDimensionsCites:1,book:{slug:"contact-and-fracture-mechanics",title:"Contact and Fracture Mechanics",fullTitle:"Contact and Fracture Mechanics"},signatures:"Jan Dzugan, Pavel Konopik and Martin Rund",authors:[{id:"184961",title:"Dr.",name:"Jan",middleName:null,surname:"Dzugan",slug:"jan-dzugan",fullName:"Jan Dzugan"},{id:"214165",title:"Dr.",name:"Pavel",middleName:null,surname:"Konopik",slug:"pavel-konopik",fullName:"Pavel Konopik"},{id:"214166",title:"Mr.",name:"Martin",middleName:null,surname:"Rund",slug:"martin-rund",fullName:"Martin Rund"}]},{id:"40034",title:"Application of Nanoindentation Technique in Martensitic Structures",slug:"application-of-nanoindentation-technique-in-martensitic-structures",totalDownloads:4518,totalCrossrefCites:2,totalDimensionsCites:8,book:{slug:"nanoindentation-in-materials-science",title:"Nanoindentation in Materials Science",fullTitle:"Nanoindentation in Materials Science"},signatures:"L. Zhang, T. Ohmura and K. Tsuzaki",authors:[{id:"142321",title:"Dr.",name:"Ling",middleName:null,surname:"Zhang",slug:"ling-zhang",fullName:"Ling Zhang"}]},{id:"40084",title:"Effect of the Spherical Indenter Tip Assumption on the Initial Plastic Yield Stress",slug:"effect-of-the-spherical-indenter-tip-assumption-on-the-initial-plastic-yield-stress",totalDownloads:3189,totalCrossrefCites:2,totalDimensionsCites:6,book:{slug:"nanoindentation-in-materials-science",title:"Nanoindentation in Materials Science",fullTitle:"Nanoindentation in Materials Science"},signatures:"Li Ma, Lyle Levine, Ron Dixson, Douglas Smith and David Bahr",authors:[{id:"139014",title:"Dr.",name:"Li",middleName:null,surname:"Ma",slug:"li-ma",fullName:"Li Ma"},{id:"142547",title:"Dr.",name:"Ronald",middleName:null,surname:"Dixson",slug:"ronald-dixson",fullName:"Ronald Dixson"},{id:"142548",title:"Dr.",name:"Douglas",middleName:null,surname:"Smith",slug:"douglas-smith",fullName:"Douglas Smith"},{id:"142550",title:"Dr.",name:"Lyle",middleName:null,surname:"Levine",slug:"lyle-levine",fullName:"Lyle Levine"},{id:"155208",title:"Dr.",name:"David",middleName:null,surname:"Bahr",slug:"david-bahr",fullName:"David Bahr"}]},{id:"55935",title:"High‐Pressure Torsion: Experiments and Modeling",slug:"high-pressure-torsion-experiments-and-modeling",totalDownloads:989,totalCrossrefCites:1,totalDimensionsCites:2,book:{slug:"severe-plastic-deformation-techniques",title:"Severe Plastic Deformation Techniques",fullTitle:"Severe Plastic Deformation Techniques"},signatures:"Marina Borodachenkova, Wei Wen and António Manuel de Bastos\nPereira",authors:[{id:"201639",title:"Dr.",name:"Marina",middleName:null,surname:"Borodachenkova",slug:"marina-borodachenkova",fullName:"Marina Borodachenkova"},{id:"208006",title:"Dr.",name:"Wei",middleName:null,surname:"Wen",slug:"wei-wen",fullName:"Wei Wen"},{id:"211131",title:"Prof.",name:"António",middleName:"Bastos",surname:"Pereira",slug:"antonio-pereira",fullName:"António Pereira"}]},{id:"58697",title:"Experimental Studies of Nanometer-Scaled Single-Asperity Contacts with Metal Surfaces",slug:"experimental-studies-of-nanometer-scaled-single-asperity-contacts-with-metal-surfaces",totalDownloads:566,totalCrossrefCites:0,totalDimensionsCites:1,book:{slug:"contact-and-fracture-mechanics",title:"Contact and Fracture Mechanics",fullTitle:"Contact and Fracture Mechanics"},signatures:"Arnaud Caron",authors:[{id:"209993",title:"Dr.Ing.",name:"Arnaud",middleName:null,surname:"Caron",slug:"arnaud-caron",fullName:"Arnaud Caron"}]}],onlineFirstChaptersFilter:{topicSlug:"solid-mechanics",limit:3,offset:0},onlineFirstChaptersCollection:[],onlineFirstChaptersTotal:0},preDownload:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[{type:"book",id:"10176",title:"Microgrids and Local Energy Systems",subtitle:null,isOpenForSubmission:!0,hash:"c32b4a5351a88f263074b0d0ca813a9c",slug:null,bookSignature:"Prof. Nick Jenkins",coverURL:"https://cdn.intechopen.com/books/images_new/10176.jpg",editedByType:null,editors:[{id:"55219",title:"Prof.",name:"Nick",middleName:null,surname:"Jenkins",slug:"nick-jenkins",fullName:"Nick Jenkins"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:8,limit:8,total:1},route:{name:"profile.detail",path:"/profiles/185289/cheryl-latimer",hash:"",query:{},params:{id:"185289",slug:"cheryl-latimer"},fullPath:"/profiles/185289/cheryl-latimer",meta:{},from:{name:null,path:"/",hash:"",query:{},params:{},fullPath:"/",meta:{}}}},function(){var e;(e=document.currentScript||document.scripts[document.scripts.length-1]).parentNode.removeChild(e)}()