Multilayer or blend heterostructures based on porphyrins and phthalocyanines were obtained on different substrates using VTE and MAPLE methods. Stacked structures based on ZnPc and C60 with NTCDA were prepared by VTE on ITO/glass, their current value being increased by the deposition of the materials in an inverted configuration or by using ITO/PEDOT:PSS as a substrate. Multilayer structures comprising ZnPc and NTCDA were fabricated by MAPLE on an AZO/glass. Treating the AZO in oxygen plasma, a higher current value was obtained for the deposited heterostructures. The oxygen plasma treatment can increase the work function of the AZO resulting in a decrease of the energetic barrier from AZO/organic interface and finally improving the charge transport. Stacked layers or blend heterostructures having ZnPc, MgPc and TPyP were deposited by MAPLE on ITO/PET. In the case of those containing MgPc and TPyP, an increase in the current value (in dark) was obtained for the blend compared to the stacked layer configuration. For those with ZnPc and TPyP, under illumination, a photovoltaic effect was observed for the blend structure. All heterostructures are featured by a large absorption in the visible domain of the solar spectrum and suitable electrical properties for their use in OPV applications.
Part of the book: Phthalocyanines and Some Current Applications
Laser techniques such as pulsed laser deposition, combinatorial pulsed laser deposition, and matrix-assisted pulsed laser evaporation were used to deposit thin films for optoelectronic applications. High-quality transparent conductor oxide films ITO, AZO, and IZO were deposited on polyethylene terephthalate by PLD, an important experimental parameter being the target-substrate distance. The TCO films present a high transparency (>95%) and a reduced electrical resistivity (5 × 10−4 Ωcm) characteristics very useful for their integration in the flexible electronics. InxZn1−xO films with a compositional library were obtained by CPLD. These films are featured by a high optical transmission (>95%), the lowest resistivity (8.6 × 10−4 Ωcm) being observed for an indium content of about 44–49 at.%. Organic heterostructures based on arylenevinylene oligomers (P78 and P13) or arylene polymers (AMC16 and AMC22) were obtained by MAPLE. In the case of ITO/P78/Alq3/Al heterostructures, a higher current value is obtained when the film thickness increases. Also, a photovoltaic effect was observed for heterostructures based on AMC16 or AMC22 deposited on ITO covered by a thin layer of PEDOT:PSS. Due to their optical and electrical properties, such organic heterostructures can be interesting for the organic photovoltaic cells (OPV) applications.
Part of the book: Nanoscaled Films and Layers