Mohamed Fellah

By Zine El Abiddine Fellah, Mohamed Fellah, Claude Depollier, Erick Ogam and Farid G. Mitri

This chapter provides different models for the acoustic wave propagation in porous materials having a rigid and an elastic frames. The direct problem of reflection and transmission of acoustic waves by a slab of porous material is studied. The inverse problem is solved using experimental reflected and transmitted signals. Both high- and low-frequency domains are studied. Different acoustic methods are proposed for measuring physical parameters describing the acoustic propagation as porosity, tortuosity, viscous and thermal characteristic length, and flow resistivity. Some advantages and perspectives of this method are discussed.

Part of the book: Computational and Experimental Studies of Acoustic Waves

By Zine El Abiddine Fellah, Mohamed Fellah, Claude Depollier, Erick Ogam and Farid G. Mitri

This chapter provides a temporal method for measuring the porosity and the tortuosity of air-saturated porous materials using experimental reflected waves. The direct problem of reflection and transmission of acoustic waves by a slab of porous material is studied. The equivalent fluid model has considered in which the acoustic wave propagates only in the pore-space. Since the acoustic damping in air-saturated porous materials is important, only the reflected waves by the first interface are taken into account, and the multiple reflections are neglected. The study of the sensitivity analysis shows that porosity is much more sensitive than tortuosity to reflection, especially when the incident angle is less than its critical value, at which the reflection coefficient vanishes. The inverse problem is solved using experimental data at a different incidence angle in reflection. Some advantages and perspectives of this method are discussed.

Part of the book: Porosity