Omar M. Basha

By Badie I. Morsi and Omar M. Basha

Mass transfer in reactive and non-reactive multiphase systems is of vital importance in chemical, petrochemical, and biological engineering applications. In this chapter, theories and models of mass transfer in gas-liquid, gas-solid and gas-liquid-solid systems with and without chemical reactions are briefly reviewed. Literature data on the mass transfer characteristics in multiphase reactors over the last two decades with applications to the Fischer-Tropsch (F-T) synthesis are summarized. Moreover, the F-T reactions are described and an overview of the use of Slurry Bubble Column Reactors (SBCRs) and Multitubular Fixed Bed Reactors (MTFBRs) for low temperature F-T (LTFT) synthesis are discussed. The important factors affecting the hydrodynamic (gas holdup, bubble size/distribution) and mass transfer parameters (volumetric mass transfer coefficients) in SBCRs for F-T synthesis, including operating conditions, gas-liquid-solid properties, reactor geometry and internals as well as gas distributors are also discussed. The discussion reveals that the performance of the LTFT SBCR operating in the churn-turbulent flow regime is controlled by the resistance in the liquid-side film and/or the F-T reaction kinetics depending on the operating conditions prevailing in the reactor. Also, there is a great need to understand the behavior and quantify the hydrodynamics and mass transfer in SBCRs operating with syngas (H2 + CO) and F-T reactor wax in the presence of active catalyst (iron or cobalt) under typical F-T synthesis conditions in a large SBCR with an inside diameter ≥0.15m.

Part of the book: Mass Transfer

By Omar M. Basha and Badie I. Morsi

Despite the notion that computational fluid dynamics (CFD) models are considered complicated, expensive, time-consuming and difficult to formulate, their implementation offers an advanced prospect to move beyond empirical models, which inherit severe limitations in terms of flexibility, scale-up, and optimization of slurry bubble column reactors (SBCRs). This is because complex hydrodynamics coupled with chemical reactions in such reactors increase the uncertainty in using empirical models, leading to significant startup delays and overruns. Recent work by Basha et al. has shown that properly validated CFD models provide an exceptional opportunity to gain detailed temporal and spatial information about the local hydrodynamics and overall behavior as well as performance of SBCRs. This chapter provides a comprehensive overview of different CFD frameworks which could be used to model SBCRs, namely the multi-Eulerian, direct numerical simulations (DNS) and large Eddy simulation (LES). The steps required in developing CFD models and the optimization of different sub-models, such as interphase interactions, solid-phase representation, bubble population balance, bubble-induced turbulence, mass transfer and reaction kinetics are highlighted. Different convergence criteria for meshing, solution stability and techniques for maximizing the CFD model scale without compromising accuracy are addressed. An example of using CFD multi-Eulerian frameworks to describe the local hydrodynamics in a pilot-scale SBCR (0.3-m ID, 3-m height) operating under the Fisher-Tropsch (F-T) synthesis process are also provided.

Part of the book: Computational Fluid Dynamics