Thermoplastic materials such as polyamides (nylon), acetal resins, epoxy resins, polystyrene, polycarbonate resins, polyurethane and acrylic thermoplastic resins were introduced in dentistry as an alternative to classic resins, which have major disadvantages such as the toxicity of the residual monomer, awkward wrapping system and difficult processing.
Part of the book: Thermoplastic Elastomers
Alloys are used in various areas of dentistry. The field of dental alloys is a very extensive one, encompassing both the materials themselves as well as the manufacturing methods, which are constantly developing. Our chapter focuses on corrosion and biocompatibility assessment, using various methods. At present there is no perfect dental alloy. Superalloys for dental use are not yet available, and only few studies concerning the new generation of superalloy candidates for medical applications have recently been developed, with promising results.
Part of the book: Superalloys
Alloys are used in various areas of dentistry, but mainly in prosthetics. Their properties, behavior, and corrosion resistance are of great importance for the success of the prosthetic treatment. Among the investigations used for assessing dental alloys, in this chapter, we focus on metallographic observation, scanning electron microscopy, and energy-dispersive X-ray spectroscopy and present the ways we investigated several types of dental alloys. We obtained important data concerning their structure and corrosion potential that could explain certain shortcomings which appeared after luting of the fixed partial dentures.
Part of the book: Micro and Nanotechnologies for Biotechnology
Acrylic resins dominated dentures technology for several decades. Due to their many disadvantages, new classes of resins, which promise better quality, constantly appear. Mechanical properties of acrylic resins, including fracture behaviour, water absorption and mechanical strength degradation caused by the exposure to saliva of classical heat-cured acrylic resins compared to alternative urethane-based light-cured resins, were carried out. The allergy potential of acrylic resins was evaluated by in vivo and in vitro tests. New choices of resins, like thermoplastic injected resins, light-cured or milled high-performance polymers, with better properties compared to acrylics, suitable for dental applications are being presented.
Part of the book: Acrylic Polymers in Healthcare