Summary of blending and sintering methods for the production of Al/CNT composites.
\\n\\n
IntechOpen Book Series will also publish a program of research-driven Thematic Edited Volumes that focus on specific areas and allow for a more in-depth overview of a particular subject.
\\n\\nIntechOpen Book Series will be launching regularly to offer our authors and editors exciting opportunities to publish their research Open Access. We will begin by relaunching some of our existing Book Series in this innovative book format, and will expand in 2022 into rapidly growing research fields that are driving and advancing society.
\\n\\nLaunching 2021
\\n\\nArtificial Intelligence, ISSN 2633-1403
\\n\\nVeterinary Medicine and Science, ISSN 2632-0517
\\n\\nBiochemistry, ISSN 2632-0983
\\n\\nBiomedical Engineering, ISSN 2631-5343
\\n\\nInfectious Diseases, ISSN 2631-6188
\\n\\nPhysiology (Coming Soon)
\\n\\nDentistry (Coming Soon)
\\n\\nWe invite you to explore our IntechOpen Book Series, find the right publishing program for you and reach your desired audience in record time.
\\n\\nNote: Edited in October 2021
\\n"}]',published:!0,mainMedia:{caption:"",originalUrl:"/media/original/132"}},components:[{type:"htmlEditorComponent",content:'With the desire to make book publishing more relevant for the digital age and offer innovative Open Access publishing options, we are thrilled to announce the launch of our new publishing format: IntechOpen Book Series.
\n\nDesigned to cover fast-moving research fields in rapidly expanding areas, our Book Series feature a Topic structure allowing us to present the most relevant sub-disciplines. Book Series are headed by Series Editors, and a team of Topic Editors supported by international Editorial Board members. Topics are always open for submissions, with an Annual Volume published each calendar year.
\n\nAfter a robust peer-review process, accepted works are published quickly, thanks to Online First, ensuring research is made available to the scientific community without delay.
\n\nOur innovative Book Series format brings you:
\n\nIntechOpen Book Series will also publish a program of research-driven Thematic Edited Volumes that focus on specific areas and allow for a more in-depth overview of a particular subject.
\n\nIntechOpen Book Series will be launching regularly to offer our authors and editors exciting opportunities to publish their research Open Access. We will begin by relaunching some of our existing Book Series in this innovative book format, and will expand in 2022 into rapidly growing research fields that are driving and advancing society.
\n\nLaunching 2021
\n\nArtificial Intelligence, ISSN 2633-1403
\n\nVeterinary Medicine and Science, ISSN 2632-0517
\n\nBiochemistry, ISSN 2632-0983
\n\nBiomedical Engineering, ISSN 2631-5343
\n\nInfectious Diseases, ISSN 2631-6188
\n\nPhysiology (Coming Soon)
\n\nDentistry (Coming Soon)
\n\nWe invite you to explore our IntechOpen Book Series, find the right publishing program for you and reach your desired audience in record time.
\n\nNote: Edited in October 2021
\n'}],latestNews:[{slug:"intechopen-supports-asapbio-s-new-initiative-publish-your-reviews-20220729",title:"IntechOpen Supports ASAPbio’s New Initiative Publish Your Reviews"},{slug:"webinar-introduction-to-open-science-wednesday-18-may-1-pm-cest-20220518",title:"Webinar: Introduction to Open Science | Wednesday 18 May, 1 PM CEST"},{slug:"step-in-the-right-direction-intechopen-launches-a-portfolio-of-open-science-journals-20220414",title:"Step in the Right Direction: IntechOpen Launches a Portfolio of Open Science Journals"},{slug:"let-s-meet-at-london-book-fair-5-7-april-2022-olympia-london-20220321",title:"Let’s meet at London Book Fair, 5-7 April 2022, Olympia London"},{slug:"50-books-published-as-part-of-intechopen-and-knowledge-unlatched-ku-collaboration-20220316",title:"50 Books published as part of IntechOpen and Knowledge Unlatched (KU) Collaboration"},{slug:"intechopen-joins-the-united-nations-sustainable-development-goals-publishers-compact-20221702",title:"IntechOpen joins the United Nations Sustainable Development Goals Publishers Compact"},{slug:"intechopen-signs-exclusive-representation-agreement-with-lsr-libros-servicios-y-representaciones-s-a-de-c-v-20211123",title:"IntechOpen Signs Exclusive Representation Agreement with LSR Libros Servicios y Representaciones S.A. de C.V"},{slug:"intechopen-expands-partnership-with-research4life-20211110",title:"IntechOpen Expands Partnership with Research4Life"}]},book:{item:{type:"book",id:"8039",leadTitle:null,fullTitle:"Theorizing STEM Education in the 21st Century",title:"Theorizing STEM Education in the 21st Century",subtitle:null,reviewType:"peer-reviewed",abstract:"Theorising STEM Education in the 21st Century is a book that captures the essence of Science, Technology, Engineering and Mathematics and the intricacies of STEM education in the contemporary society. It explores STEM as an interdisciplinary field as well as the individual disciplines that make up STEM. This ensures the field of STEM as a whole is theorised. The book provides critical insight on STEM education from Cairo to Cape Town or from America to Indonesia. With a team of authors from universities across the world, the book is a vital contribution to critical scholarship on STEM education in contemporary times.",isbn:"978-1-78985-702-3",printIsbn:"978-1-78985-701-6",pdfIsbn:"978-1-78985-607-1",doi:"10.5772/intechopen.77870",price:119,priceEur:129,priceUsd:155,slug:"theorizing-stem-education-in-the-21st-century",numberOfPages:236,isOpenForSubmission:!1,isInWos:null,isInBkci:!1,hash:"0c99d528dbcc6ed5e8a26f96b36c812d",bookSignature:"Kehdinga George Fomunyam",publishedDate:"February 26th 2020",coverURL:"https://cdn.intechopen.com/books/images_new/8039.jpg",numberOfDownloads:13240,numberOfWosCitations:2,numberOfCrossrefCitations:14,numberOfCrossrefCitationsByBook:0,numberOfDimensionsCitations:22,numberOfDimensionsCitationsByBook:1,hasAltmetrics:1,numberOfTotalCitations:38,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"February 12th 2019",dateEndSecondStepPublish:"March 28th 2019",dateEndThirdStepPublish:"May 27th 2019",dateEndFourthStepPublish:"August 15th 2019",dateEndFifthStepPublish:"October 14th 2019",currentStepOfPublishingProcess:5,indexedIn:"1,2,3,4,5,6",editedByType:"Edited by",kuFlag:!1,featuredMarkup:null,editors:[{id:"267912",title:"Dr.",name:"Kehdinga George",middleName:null,surname:"Fomunyam",slug:"kehdinga-george-fomunyam",fullName:"Kehdinga George Fomunyam",profilePictureURL:"https://mts.intechopen.com/storage/users/267912/images/system/267912.jpg",biography:"Dr. Kehdinga George Fomunyam holds a Ph.D. in Curriculum Studies from the University of KwaZulu-Natal, South Africa (UKZN). He is currently working as a lecturer and researcher at Mangosuthu University of Technology, South Africa. Before this, he was a lecturer and researcher at the Durban University of Technology, University of KwaZulu-Natal and the University of Adam Barka d’Abéché. His research areas are curriculum, pedagogy, quality assurance, research and development, STEM education, social science, teacher education, literature, and higher education. He has presented papers at various national and international conferences, published three peer-reviewed books and several chapters in books. He has also published about 25 peer-reviewed research articles in national and international journals.",institutionString:"Mangosuthu University of Technology",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"2",totalChapterViews:"0",totalEditedBooks:"1",institution:{name:"Mangosuthu University of Technology",institutionURL:null,country:{name:"South Africa"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"1316",title:"Higher Education",slug:"higher-education"}],chapters:[{id:"70484",title:"Introductory Chapter: Theorising STEM Education in the Contemporary Society",doi:"10.5772/intechopen.90422",slug:"introductory-chapter-theorising-stem-education-in-the-contemporary-society",totalDownloads:698,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,abstract:null,signatures:"Kehdinga George Fomunyam",downloadPdfUrl:"/chapter/pdf-download/70484",previewPdfUrl:"/chapter/pdf-preview/70484",authors:[{id:"267912",title:"Dr.",name:"Kehdinga George",surname:"Fomunyam",slug:"kehdinga-george-fomunyam",fullName:"Kehdinga George Fomunyam"}],corrections:null},{id:"68144",title:"Implementation and Didactic Validation of STEM Experiences in Primary Education: Analysis of the Cognitive and Affective Dimension",doi:"10.5772/intechopen.88048",slug:"implementation-and-didactic-validation-of-stem-experiences-in-primary-education-analysis-of-the-cogn",totalDownloads:741,totalCrossrefCites:3,totalDimensionsCites:6,hasAltmetrics:1,abstract:"Several studies highlight the need to improve STEM competencies from an early age, where the first attitudes and vocations toward these subjects begin to be forged. This research pursued two general objectives: First, to analyze the cognitive and affective dimension of primary education students in relation to STEM content, using a sample of 801 students. Second, to implement and validate STEM experiences as didactic strategies that improve the teaching/learning of these areas in students aged 10–12, using a sample of 455 students. The design of the research was quasi-experimental with pretest, posttest, control, and experimental groups, analyzing both cognitive and affective variables. The inferential statistical analysis of the obtained data reveals that STEM education promotes a positive evolution in the students both in the learning and emotional variables, existing statistically significant differences compared to a traditional methodology.",signatures:"Guadalupe Martínez-Borreguero, Milagros Mateos-Núñez and Francisco Luis Naranjo-Correa",downloadPdfUrl:"/chapter/pdf-download/68144",previewPdfUrl:"/chapter/pdf-preview/68144",authors:[{id:"86775",title:"Dr.",name:"Guadalupe",surname:"Martinez Borreguero",slug:"guadalupe-martinez-borreguero",fullName:"Guadalupe Martinez Borreguero"},{id:"298368",title:"Dr.",name:"Francisco Luis",surname:"Naranjo-Correa",slug:"francisco-luis-naranjo-correa",fullName:"Francisco Luis Naranjo-Correa"},{id:"298369",title:"Mrs.",name:"Milagros",surname:"Mateos-Núñez",slug:"milagros-mateos-nunez",fullName:"Milagros Mateos-Núñez"}],corrections:null},{id:"69373",title:"Inverse Modeling Problems in Task Enrichment for STEM Courses",doi:"10.5772/intechopen.89109",slug:"inverse-modeling-problems-in-task-enrichment-for-stem-courses",totalDownloads:744,totalCrossrefCites:1,totalDimensionsCites:0,hasAltmetrics:0,abstract:"Problem solving is considered as one of the most important topics in STEM (science, technology, engineering, and mathematics) education, and this is especially relevant when problems require modeling skills in order to be solved. Also, it should be noted that in many branches of science and technology, typical problems are posed in an inverse form. Then, combining both characteristics, the so-called inverse modeling problems deserve to be studied deeply, particularly in their potential for task enrichment. For those reasons, since 2016, a research project was carried out, by using inverse modeling problems to develop prospective teacher’s task enrichment skills. The results of this experience that took place in 2017 showed nine different groups of proposals where only few participants were very creative, whereas many others posed trivial problems or simply imitated examples analyzed previously. After that, a new research design was proposed during 2018 and implemented during the first months of 2019, with the aim of avoiding—or at least attenuating—those difficulties observed in the previous fieldwork. The new results showed interesting differences and few similarities when compared with the other experience. In this chapter, both experiences are analyzed, and lastly, findings and final conclusions are reported.",signatures:"Victor Martinez-Luaces, José Antonio Fernández-Plaza and Luis Rico",downloadPdfUrl:"/chapter/pdf-download/69373",previewPdfUrl:"/chapter/pdf-preview/69373",authors:[{id:"112457",title:"Dr.",name:"Victor",surname:"Martinez-Luaces",slug:"victor-martinez-luaces",fullName:"Victor Martinez-Luaces"},{id:"298788",title:"Dr.",name:"Luis",surname:"Rico",slug:"luis-rico",fullName:"Luis Rico"},{id:"298789",title:"Dr.",name:"José Antonio",surname:"Fernández-Plaza",slug:"jose-antonio-fernandez-plaza",fullName:"José Antonio Fernández-Plaza"}],corrections:null},{id:"68079",title:"Integrated STEM Education in K-12: Theory Development, Status, and Prospects",doi:"10.5772/intechopen.88141",slug:"integrated-stem-education-in-k-12-theory-development-status-and-prospects",totalDownloads:802,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,abstract:"In this chapter, we focus on the integrated nature of STEM education in a wide-ranging view. Frist, we briefly interpret reasons why STEM education and synthesize various standpoints of integration in the literature. Then, on the basis of the relevant literature on integrated STEM education, an ideal model is proposed, which include four elements: discipline knowledge, teaching strategies, expectations, and learning system. After that, some analysis and discussion of this ideal model together with all parts of the model are provided. Followed by this ideal model, we have examined the literature on integrated STEM education in action so as to discuss the way to be integrated toward STEM education and enactment of integrated STEM education in practice. Finally, based on this ideal model, a couple of conclusions are summarized and implications are discussed.",signatures:"Bing Wei and Yue Chen",downloadPdfUrl:"/chapter/pdf-download/68079",previewPdfUrl:"/chapter/pdf-preview/68079",authors:[{id:"298845",title:"Associate Prof.",name:"Bing",surname:"Wei",slug:"bing-wei",fullName:"Bing Wei"},{id:"306275",title:"Ms.",name:"Yue",surname:"Chen",slug:"yue-chen",fullName:"Yue Chen"}],corrections:null},{id:"67864",title:"‘Making’ as a Catalyst for Engaging Young Female Adolescents in STEM Learning",doi:"10.5772/intechopen.87036",slug:"-making-as-a-catalyst-for-engaging-young-female-adolescents-in-stem-learning",totalDownloads:903,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,abstract:"STEM enrichment programs have demonstrated positive impacts on young female adolescents’ interest and aptitude in STEM, personal/social-psychological well-being, and educational aspirations. Introducing STEM knowledge and skills in an environment of ‘making,’ that is, in a setting of hands-on activities, may further enhance adolescent girls’ engagement in STEM learning. The maker movement, defined as the convergence of technology and traditional artistry, has generated interest among educators for its potential to nurture STEM learning, including its capacity to engage diverse populations of youths in the making of creative objects through experimentation in science, technology, engineering, and math (i.e., STEM-based making). STEM-based making is a way to support young girls, who often approach making from an esthetic or personal expression perspective, to more fully integrate systems and technologies that advance critical thinking, innovative prototyping, and problem-solving into the making process. Insights are presented as to how STEM-based making designed for young female adolescents—a group that has traditionally had limited access to extracurricular STEM experiences as well as to makerspaces—may foster greater access to, and equity in, STEM learning. The role of universities in facilitating access to and equity in STEM-based making also is addressed.",signatures:"Karen Hyllegard, Jennifer Ogle and Sonali Diddi",downloadPdfUrl:"/chapter/pdf-download/67864",previewPdfUrl:"/chapter/pdf-preview/67864",authors:[{id:"297924",title:"Prof.",name:"Karen",surname:"Hyllegard",slug:"karen-hyllegard",fullName:"Karen Hyllegard"},{id:"297926",title:"Prof.",name:"Jennifer",surname:"Ogle",slug:"jennifer-ogle",fullName:"Jennifer Ogle"},{id:"297927",title:"Prof.",name:"Sonali",surname:"Diddi",slug:"sonali-diddi",fullName:"Sonali Diddi"}],corrections:null},{id:"69249",title:"STEM for Sustainable Skills for the Fourth Industrial Revolution: Snapshot at Some TVET Colleges in South Africa",doi:"10.5772/intechopen.89294",slug:"stem-for-sustainable-skills-for-the-fourth-industrial-revolution-snapshot-at-some-tvet-colleges-in-s",totalDownloads:925,totalCrossrefCites:2,totalDimensionsCites:4,hasAltmetrics:0,abstract:"Technological advancement is a major driver of the economic growth and has raised living standards enormously (though unevenly) across the globe. Digital technologies radically transform the structure of organisations and employment models, including teaching and learning. Youth and people who lack high-level technological and interpersonal skills are becoming vulnerable due to digital automated jobs. There is a need for targeted and strategic skills, and STEM that is responding to the changing technological world. The digital revolution and an increasing demand for designing and manufacturing are driving the growth of the creative sector, which extends from arts to science and technology and involves cultural creativity and innovation. Science, technology, engineering and mathematics (STEM) students should be equipped with designing and making skills for the twenty-first-century jobs. There is growing polarisation of labour market opportunities between high- and low-skill jobs, unemployment and underemployment especially among young people. Globally, almost 75 million youth are officially unemployed. This chapter present the driving forces for new jobs and skills for the future. The chapter also outlines the contribution of STEM knowledge and skills for digital literacy from basics to an advance level. The implication of digital literacy for the fourth industrial revolution is highlighted. The empirical part of this chapter presents results based on the investigation done on the vocational educational and training practices at three TVET colleges in one province in South Africa. The study focused on vocational pedagogic and didactic practices, workshop material and equipment for practical training, work-integrated learning and integration of theory and practice in vocational subjects. This investigation is a case study to gauge the extent of readiness of some TVET colleges for the fourth industrial revolution. The methodology of collecting data was questionnaires, interviews and observation. The participants of the study were students and lecturers. On the basis of these data, the paper determines the extent of readiness of TVET as well as CET colleges in the country. The paper recommends measures to position the TVET and CET colleges for the fourth industrial revolution.",signatures:"Moses Makgato",downloadPdfUrl:"/chapter/pdf-download/69249",previewPdfUrl:"/chapter/pdf-preview/69249",authors:[{id:"301731",title:"Dr.",name:"Moses",surname:"Makgato",slug:"moses-makgato",fullName:"Moses Makgato"}],corrections:null},{id:"67951",title:"Gender Equity in STEM Education: The Case of an Egyptian Girls’ School",doi:"10.5772/intechopen.87170",slug:"gender-equity-in-stem-education-the-case-of-an-egyptian-girls-school",totalDownloads:1080,totalCrossrefCites:2,totalDimensionsCites:3,hasAltmetrics:1,abstract:"This chapter explored gender equity in STEM education within the context of an Egyptian STEM school for girls. An intrinsic case study design was used to explore the experiences of girls in STEM from a socio-cultural perspective within a critical theory framework. The participants were STEM school graduates currently enrolled in engineering tracks in higher education institutions in the United States. Though STEM fields, especially engineering, are stereotyped as male dominated fields, Egyptian girls at a Cairo single sex STEM school pursued further studies in STEM fields. Findings show that gender gaps in STEM fields in Egypt and girls’ education and work decisions were deeply influenced by their childhood background, family education level, socioeconomic status, and idiosyncratic factors like self-efficacy and resistance. At the school level, teachers’ support, challenging STEM curriculum, dynamic formative assessment, student-centered pedagogies, female friendly teaching approaches, and a positive school environment played a great role in developing Egyptian female students’ potential to pursue STEM fields in higher education institutions.",signatures:"Mohamed El Nagdi and Gillian Heather Roehrig",downloadPdfUrl:"/chapter/pdf-download/67951",previewPdfUrl:"/chapter/pdf-preview/67951",authors:[{id:"296626",title:"Dr.",name:"Mohamed",surname:"El Nagdi",slug:"mohamed-el-nagdi",fullName:"Mohamed El Nagdi"},{id:"296627",title:"Prof.",name:"Gillian",surname:"Roehrig",slug:"gillian-roehrig",fullName:"Gillian Roehrig"}],corrections:null},{id:"68740",title:"A Theoretical Framework for Implementing STEM Education",doi:"10.5772/intechopen.88304",slug:"a-theoretical-framework-for-implementing-stem-education",totalDownloads:1523,totalCrossrefCites:1,totalDimensionsCites:3,hasAltmetrics:0,abstract:"Globally, strengthening Science, Technology, Engineering and Mathematics (STEM) education is recognized as embedding solutions to many societal problems like the depletion of natural resources and issues related to climate change. The recognition of STEM disciplines as economic drivers motivated the initiation of STEM education in both developed and developing nations. This is based on the thinking that an effective STEM education is a vehicle for developing in students the much desired twenty-first century competences. Yet, its operationalization has remained a great challenge in many nations. In most nations, educators lack a cohesive understanding of STEM education and are also deprived of an easy-to-understand STEM education framework that informs classroom practices. This chapter proposes a practical theoretical framework that nations may adopt and/or adapt for their STEM education to be successful.",signatures:"Vongai Mpofu",downloadPdfUrl:"/chapter/pdf-download/68740",previewPdfUrl:"/chapter/pdf-preview/68740",authors:[{id:"299343",title:"Dr.",name:"Vongai",surname:"Mpofu",slug:"vongai-mpofu",fullName:"Vongai Mpofu"}],corrections:null},{id:"69139",title:"Formative Assessment in Mathematics Education in the Twenty-First Century",doi:"10.5772/intechopen.88996",slug:"formative-assessment-in-mathematics-education-in-the-twenty-first-century",totalDownloads:1307,totalCrossrefCites:2,totalDimensionsCites:2,hasAltmetrics:0,abstract:"Assessment does not always have to involve paper and pencil but can instead be a project, an observation, or a task that shows a student has acquired the concept and can make sound connections and linkages with other related concepts. Learning is meaningful when the student comprehends the relationship of what is being learned to other knowledge. Furthermore, concept map measures aspects of learning, which conventional tests cannot measure such as students’ misconceptions. As such, the chapter shall focus on formative assessment in mathematics classroom mediated by a method of teaching (concept mapping) that promotes critical thinking, which assists teachers to teach and assess students’ understanding and make connections between concepts explicitly.",signatures:"Benard Chigonga",downloadPdfUrl:"/chapter/pdf-download/69139",previewPdfUrl:"/chapter/pdf-preview/69139",authors:[{id:"298587",title:"Dr.",name:"Benard",surname:"Chigonga",slug:"benard-chigonga",fullName:"Benard Chigonga"}],corrections:null},{id:"68166",title:"Towards a Forward-Thinking College Calculus Program",doi:"10.5772/intechopen.87940",slug:"towards-a-forward-thinking-college-calculus-program",totalDownloads:758,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:1,abstract:"Calculus is perceived as serving many roles in college STEM students’ education, including as a way to ‘weed out’ students who should not be in the major to teaching fundamental concepts. No matter its purpose, it is clear that college calculus is viewed as a critical course in university STEM education. It is also clear that in the US and other countries, STEM education is disproportionately serving men and white and Asian students. In this chapter, I discuss how calculus has come to occupy this position over time and the current state of college calculus drawing on two national studies in the United States. I then define a forward thinking-calculus program as one designed to support a diverse population of students to thrive, provide an example of a program aligned with this approach, and discuss key features to consider in designing a calculus program for the modern age.",signatures:"Jessica Hagman",downloadPdfUrl:"/chapter/pdf-download/68166",previewPdfUrl:"/chapter/pdf-preview/68166",authors:[{id:"296965",title:"Dr.",name:"Jessica",surname:"Hagman",slug:"jessica-hagman",fullName:"Jessica Hagman"}],corrections:null},{id:"68547",title:"The Role of Mathematical Modeling in STEM Integration and Education",doi:"10.5772/intechopen.88615",slug:"the-role-of-mathematical-modeling-in-stem-integration-and-education",totalDownloads:1271,totalCrossrefCites:2,totalDimensionsCites:3,hasAltmetrics:0,abstract:"With the rapidly developing technology, the labor force of the society has changed direction, and in the age of informatics, creative engineering applications have come to the forefront. Accordingly, the education levels of the labor force were also changed. The science, technology, engineering, and mathematics (STEM) education model in most countries aims to teach science, mathematics, technology, and engineering in relation to primary, secondary, high school, and higher education. STEM education, which has an impact in our country in recent years, has an important role in acquiring new skills, supporting creativity, innovation, and entrepreneurship, gaining the ability to transition between professions and adapting to new occupations. Nowadays, technology is expected to have different skills from individuals who will work in different fields with rapid development. Also, different teaching strategies play a major role in STEM integration and training. One of them, mathematical modeling, is the process of analyzing real-life or realistic situation using mathematical methods in the most general sense. The idea that mathematical modeling cycles should be used in STEM education at all levels from primary to tertiary education has gained importance in recent years, since it increases the students’ motivation towards the lesson and they learn better by concentrating their attention.",signatures:"Murat Tezer",downloadPdfUrl:"/chapter/pdf-download/68547",previewPdfUrl:"/chapter/pdf-preview/68547",authors:[{id:"299964",title:"Associate Prof.",name:"Murat",surname:"Tezer",slug:"murat-tezer",fullName:"Murat Tezer"}],corrections:null},{id:"69130",title:"Discipline, Task and Reader Characteristics of Introductory Physics Students’ Graph Comprehension in Mathematics and Kinematics",doi:"10.5772/intechopen.88235",slug:"discipline-task-and-reader-characteristics-of-introductory-physics-students-graph-comprehension-in-m",totalDownloads:732,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,abstract:"Students’ comprehension of graphs may be affected by the characteristics of the discipline in which the graph is used, the type of the task, as well as the background of the students who are the readers or interpreters of the graph. This research study investigated these aspects of the graph comprehension from 152 first year undergraduate physics students by comparing their responses to the corresponding tasks in the mathematics and physics disciplines. The discipline characteristics were analysed for four task-related constructs, namely coordinates, representations, area and slope. Students’ responses to corresponding visual decoding and judgement tasks set in mathematics and kinematics contexts were statistically compared. The effects of the participants’ gender, year of school completion and study course were determined as reader characteristics. The results of the empirical study indicated that participants generally transferred their mathematics knowledge on coordinates and representation of straight-line graphs to the physics contexts, but not in the cases of parabolic and hyperbolic functions or area under graphs. Insufficient understanding of the slope concept contributed to weak performances on this construct in both mathematics and physics contexts. Discipline characteristics seem to play a vital role in students’ understanding, whilst reader characteristics had insignificant to medium effects on their responses.",signatures:"Itumeleng Phage",downloadPdfUrl:"/chapter/pdf-download/69130",previewPdfUrl:"/chapter/pdf-preview/69130",authors:[{id:"284624",title:"Mr.",name:"Itumeleng",surname:"Phage",slug:"itumeleng-phage",fullName:"Itumeleng Phage"}],corrections:null},{id:"68653",title:"Implementation of Elliptic Curve25519 in Cryptography",doi:"10.5772/intechopen.88614",slug:"implementation-of-elliptic-curve25519-in-cryptography",totalDownloads:845,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:1,abstract:"Bernstein’s design implementation of elliptic Curve25519 in key exchange is claimed to be highly secure and efficient. This curve is, for example, used in the key exchange scheme of TextSecure for Instant Messaging. In this paper, we present an implementation of elliptic Curve25519 in the simplified Elliptic Curve Integrated Encryption Scheme, thus showing that elliptic Curve25519 can also serve other purposes than key exchange. The curve is in Montgomery form, which makes it possible to use Montgomery ladder. Point compression, point decompression, encryption, and decryption algorithms are presented for the simplified Elliptic Curve Integrated Encryption Scheme.",signatures:"Intan Muchtadi-Alamsyah and Yanuar Bhakti Wira Tama",downloadPdfUrl:"/chapter/pdf-download/68653",previewPdfUrl:"/chapter/pdf-preview/68653",authors:[{id:"299438",title:"Dr.",name:"Intan",surname:"Muchtadi-Alamsyah",slug:"intan-muchtadi-alamsyah",fullName:"Intan Muchtadi-Alamsyah"},{id:"306265",title:"Mr.",name:"Yanuar Bhakti Wira",surname:"Tama",slug:"yanuar-bhakti-wira-tama",fullName:"Yanuar Bhakti Wira Tama"}],corrections:null},{id:"68243",title:"Programme Integrating Courses Making Engineering Students Reflect",doi:"10.5772/intechopen.88253",slug:"programme-integrating-courses-making-engineering-students-reflect",totalDownloads:913,totalCrossrefCites:1,totalDimensionsCites:1,hasAltmetrics:0,abstract:"A programme integrating course (PIC) is a special type of course, lasting for several academic years and aiming to strengthen programme coherence, by tying the students, instructors and programme director closer together. The first PIC was started at KTH in 2008. Since then, the concept has been polished and adopted by many engineering and masters of science programmes at KTH and at other universities. The course is built around regular (four times a year) reflection seminars in small cross-grade groups, mentored by a teacher. Each seminar has a topic, for example, study skills, procrastination, exchange studies, generic skills, minorities and equal treatment and ergonomics and mental health. Before the seminar, the students are presented with some material to read and view. Based on the texts and videos, each student should write a reflection document and read and comment some other students’ reflections. At the seminar, the students will further discuss the topic and discuss the courses that they are currently taking. PIC has been evaluated and found very valuable by both the students and the teachers acting as mentors. This chapter will review the existing literature on PICs, which is mostly in Swedish.",signatures:"Viggo Kann",downloadPdfUrl:"/chapter/pdf-download/68243",previewPdfUrl:"/chapter/pdf-preview/68243",authors:[{id:"300465",title:"Prof.",name:"Viggo",surname:"Kann",slug:"viggo-kann",fullName:"Viggo Kann"}],corrections:null}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},subseries:null,tags:null},relatedBooks:[{type:"book",id:"1990",title:"International Perspectives of Distance Learning in Higher Education",subtitle:null,isOpenForSubmission:!1,hash:"e9f445b89a42e6221004f529ac247127",slug:"international-perspectives-of-distance-learning-in-higher-education",bookSignature:"Joi L. Moore and Angela D. Benson",coverURL:"https://cdn.intechopen.com/books/images_new/1990.jpg",editedByType:"Edited by",editors:[{id:"102403",title:"Dr.",name:"Joi L.",surname:"Moore",slug:"joi-l.-moore",fullName:"Joi L. Moore"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9040",title:"Pedagogy in Basic and Higher Education",subtitle:"Current Developments and Challenges",isOpenForSubmission:!1,hash:"3ef45143bf2a8d798f0e423e098afe6c",slug:"pedagogy-in-basic-and-higher-education-current-developments-and-challenges",bookSignature:"Kirsi Tirri and Auli Toom",coverURL:"https://cdn.intechopen.com/books/images_new/9040.jpg",editedByType:"Edited by",editors:[{id:"234399",title:"Prof.",name:"Kirsi",surname:"Tirri",slug:"kirsi-tirri",fullName:"Kirsi Tirri"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7804",title:"Teacher Education in the 21st Century",subtitle:null,isOpenForSubmission:!1,hash:"1722e45e6ebd731426bc0e4ac5c6eee2",slug:"teacher-education-in-the-21st-century",bookSignature:"Reginald Botshabeng Monyai",coverURL:"https://cdn.intechopen.com/books/images_new/7804.jpg",editedByType:"Edited by",editors:[{id:"210249",title:"Prof.",name:"Reginald",surname:"Monyai",slug:"reginald-monyai",fullName:"Reginald Monyai"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5773",title:"Global Voices in Higher Education",subtitle:null,isOpenForSubmission:!1,hash:"98977ad0f9bc0a5224a23d6f67b343ca",slug:"global-voices-in-higher-education",bookSignature:"Susan L. Renes",coverURL:"https://cdn.intechopen.com/books/images_new/5773.jpg",editedByType:"Edited by",editors:[{id:"158868",title:"Dr.",name:"Susan",surname:"Renes",slug:"susan-renes",fullName:"Susan Renes"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7576",title:"Reimagining New Approaches in Teacher Professional Development",subtitle:null,isOpenForSubmission:!1,hash:"7ebab0695715a9b2a759da32380ded9a",slug:"reimagining-new-approaches-in-teacher-professional-development",bookSignature:"Vimbi Petrus Mahlangu",coverURL:"https://cdn.intechopen.com/books/images_new/7576.jpg",editedByType:"Edited by",editors:[{id:"196797",title:"Prof.",name:"Vimbi",surname:"Mahlangu",slug:"vimbi-mahlangu",fullName:"Vimbi Mahlangu"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11004",title:"Medical Education for the 21st Century",subtitle:null,isOpenForSubmission:!1,hash:"f8863875cdefa578f26a438ea21bdc1e",slug:"medical-education-for-the-21st-century",bookSignature:"Michael S. Firstenberg and Stanislaw P. Stawicki",coverURL:"https://cdn.intechopen.com/books/images_new/11004.jpg",editedByType:"Edited by",editors:[{id:"64343",title:"Dr.",name:"Michael S.",surname:"Firstenberg",slug:"michael-s.-firstenberg",fullName:"Michael S. Firstenberg"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10495",title:"Insights Into Global Engineering Education After the Birth of Industry 5.0",subtitle:null,isOpenForSubmission:!1,hash:"e83ddb1aa8017926d0635bbe8a90feca",slug:"insights-into-global-engineering-education-after-the-birth-of-industry-5-0",bookSignature:"Montaha Bouezzeddine",coverURL:"https://cdn.intechopen.com/books/images_new/10495.jpg",editedByType:"Edited by",editors:[{id:"313464",title:"Dr.Ing.",name:"Montaha",surname:"Bouezzeddine",slug:"montaha-bouezzeddine",fullName:"Montaha Bouezzeddine"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8283",title:"Innovations in Higher Education",subtitle:"Cases on Transforming and Advancing Practice",isOpenForSubmission:!1,hash:"9c8b8a6fe8578fbf2398932ce8c1b717",slug:"innovations-in-higher-education-cases-on-transforming-and-advancing-practice",bookSignature:"Dominique Parrish and Joanne Joyce-McCoach",coverURL:"https://cdn.intechopen.com/books/images_new/8283.jpg",editedByType:"Edited by",editors:[{id:"197795",title:"Associate Prof.",name:"Dominique",surname:"Parrish",slug:"dominique-parrish",fullName:"Dominique Parrish"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophile",surname:"Theophanides",slug:"theophile-theophanides",fullName:"Theophile Theophanides"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],ofsBooks:[]},correction:{item:{id:"79356",slug:"corrigendum-to-risk-assessment-and-health-safety-and-environmental-management-of-carbon-nanomaterial",title:"Corrigendum to: Risk Assessment and Health, Safety, and Environmental Management of Carbon Nanomaterials",doi:null,correctionPDFUrl:"https://cdn.intechopen.com/pdfs/80612.pdf",downloadPdfUrl:"/chapter/pdf-download/80612",previewPdfUrl:"/chapter/pdf-preview/80612",totalDownloads:null,totalCrossrefCites:null,bibtexUrl:"/chapter/bibtex/80612",risUrl:"/chapter/ris/80612",chapter:{id:"66689",slug:"risk-assessment-and-health-safety-and-environmental-management-of-carbon-nanomaterials",signatures:"Guilherme Lenz e Silva, Camila Viana, Danieli Domingues and Fernanda Vieira",dateSubmitted:null,dateReviewed:"February 26th 2019",datePrePublished:"April 11th 2019",datePublished:"February 19th 2020",book:{id:"8137",title:"Nanomaterials",subtitle:"Toxicity, Human Health and Environment",fullTitle:"Nanomaterials - Toxicity, Human Health and Environment",slug:"nanomaterials-toxicity-human-health-and-environment",publishedDate:"February 19th 2020",bookSignature:"Simona Clichici, Adriana Filip and Gustavo M. do Nascimento",coverURL:"https://cdn.intechopen.com/books/images_new/8137.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"64160",title:"Prof.",name:"Simona",middleName:null,surname:"Clichici",slug:"simona-clichici",fullName:"Simona Clichici"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"251730",title:"Dr.",name:"Guilherme",middleName:"Fredeico Bernardo",surname:"Lenz E Silva",fullName:"Guilherme Lenz E Silva",slug:"guilherme-lenz-e-silva",email:"guilhermelenz@usp.br",position:null,institution:null},{id:"286148",title:"Dr.",name:"Camila",middleName:null,surname:"Viana",fullName:"Camila Viana",slug:"camila-viana",email:"camilaoviana@gmail.com",position:null,institution:{name:"Centro de Desenvolvimento da Tecnologia Nuclear",institutionURL:null,country:{name:"Brazil"}}},{id:"286149",title:"Dr.",name:"Fernanda",middleName:null,surname:"Vieira",fullName:"Fernanda Vieira",slug:"fernanda-vieira",email:"fevieira2001@gmail.com",position:null,institution:{name:"Centro de Desenvolvimento da Tecnologia Nuclear",institutionURL:null,country:{name:"Brazil"}}},{id:"286151",title:"M.Sc.",name:"Danieli",middleName:"Silva",surname:"Domingues",fullName:"Danieli Domingues",slug:"danieli-domingues",email:"danielisilva@ymail.com",position:null,institution:{name:"Centro de Desenvolvimento da Tecnologia Nuclear",institutionURL:null,country:{name:"Brazil"}}}]}},chapter:{id:"66689",slug:"risk-assessment-and-health-safety-and-environmental-management-of-carbon-nanomaterials",signatures:"Guilherme Lenz e Silva, Camila Viana, Danieli Domingues and Fernanda Vieira",dateSubmitted:null,dateReviewed:"February 26th 2019",datePrePublished:"April 11th 2019",datePublished:"February 19th 2020",book:{id:"8137",title:"Nanomaterials",subtitle:"Toxicity, Human Health and Environment",fullTitle:"Nanomaterials - Toxicity, Human Health and Environment",slug:"nanomaterials-toxicity-human-health-and-environment",publishedDate:"February 19th 2020",bookSignature:"Simona Clichici, Adriana Filip and Gustavo M. do Nascimento",coverURL:"https://cdn.intechopen.com/books/images_new/8137.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"64160",title:"Prof.",name:"Simona",middleName:null,surname:"Clichici",slug:"simona-clichici",fullName:"Simona Clichici"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"251730",title:"Dr.",name:"Guilherme",middleName:"Fredeico Bernardo",surname:"Lenz E Silva",fullName:"Guilherme Lenz E Silva",slug:"guilherme-lenz-e-silva",email:"guilhermelenz@usp.br",position:null,institution:null},{id:"286148",title:"Dr.",name:"Camila",middleName:null,surname:"Viana",fullName:"Camila Viana",slug:"camila-viana",email:"camilaoviana@gmail.com",position:null,institution:{name:"Centro de Desenvolvimento da Tecnologia Nuclear",institutionURL:null,country:{name:"Brazil"}}},{id:"286149",title:"Dr.",name:"Fernanda",middleName:null,surname:"Vieira",fullName:"Fernanda Vieira",slug:"fernanda-vieira",email:"fevieira2001@gmail.com",position:null,institution:{name:"Centro de Desenvolvimento da Tecnologia Nuclear",institutionURL:null,country:{name:"Brazil"}}},{id:"286151",title:"M.Sc.",name:"Danieli",middleName:"Silva",surname:"Domingues",fullName:"Danieli Domingues",slug:"danieli-domingues",email:"danielisilva@ymail.com",position:null,institution:{name:"Centro de Desenvolvimento da Tecnologia Nuclear",institutionURL:null,country:{name:"Brazil"}}}]},book:{id:"8137",title:"Nanomaterials",subtitle:"Toxicity, Human Health and Environment",fullTitle:"Nanomaterials - Toxicity, Human Health and Environment",slug:"nanomaterials-toxicity-human-health-and-environment",publishedDate:"February 19th 2020",bookSignature:"Simona Clichici, Adriana Filip and Gustavo M. do Nascimento",coverURL:"https://cdn.intechopen.com/books/images_new/8137.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"64160",title:"Prof.",name:"Simona",middleName:null,surname:"Clichici",slug:"simona-clichici",fullName:"Simona Clichici"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}}},ofsBook:{item:{type:"book",id:"10016",leadTitle:null,title:"Advances in Heat Pump Technology",subtitle:null,reviewType:"peer-reviewed",abstract:"\r\n\tDuring the past decade heat pump technology has received tremendous interest from the researchers, engineers and manufacturers and great progress has been made particularly in its energy performance and applications. Heat pump which controls temperature by transferring heat (without generating heat) is an energy saving multipurpose technology. For instance, heat pump technology provides an energy efficient way for space (building) heating/cooling. Due to its long term cost-effective performance and applications in various sectors the global market of heat pumps is expanding rapidly. However, despite its well-known working principles and energy saving capabilities, its full potentials are not yet reached and recognized widely for the betterment of the human being as well as for the environment.
\r\n\r\n\t
\r\n\tThis book intends to cover a wide range of important areas of heat pump technology starting from fundamentals, theories, performance to advanced applications. It will also present a state of the art in research and development of heat pumps, their performance and impact in various sectors like social, economic and environment.
\r\n\t
\r\n\tThe book will be of great interest to engineers, researchers, graduate students, and manufacturers whose study/work/business involves heat pumps.
Composite materials have been in the spotlight of material science and engineering for a long time already. They provide the capability of tailoring their properties by managing very simple variables such as the reinforcement fraction or the processing parameters, among others. Their application area is found in a wide range of dissimilar fields, ranging from bioengineering [1,2] up to aerospace [3]. The applicability relies on the proper selection of both, the matrix phase and the reinforcing phase. By matrix, the phase with the largest volume fraction is meant, whereas the opposite is valid for the reinforcing phase. In the former – according to the specific application – polymers, ceramics or metals are used. Polymer-matrix composites are mainly used in applications where lightweight is required, working in environments that do not present high temperatures. On the opposite, ceramic matrices are used where inertness under high temperatures is required as well as high mechanical properties. Finally, metal matrix composites (MMC) lie in between both application fields, presenting in most cases tailored microstructures (and subsequently, tailored physical properties) and, in certain cases, lightweight.
\nReinforcing phases can be of very dissimilar nature. The most widespread phases are usually ceramic fibres and/or particles (i.e. Al2O3, TiC), which show very good mechanical properties, thus enhancing the overall mechanical properties of the composite. However, when considering the transfer properties (electrical and thermal), their ceramic nature plays a detrimental role. Furthermore, the fact that the material being subjected to improvement is a metal, with usually very good transport properties, the task becomes indeed non-trivial.
\nIn recent years, the appearance of carbon nanotubes (CNTs) has opened an interesting new field. Since CNTs show intrinsically outstanding physical properties, the aforementioned drawback brought by ceramic reinforcements might be straightforwardly overcome. Yet, the predicted physical properties of CNTs are only realisable if the CNT is in a “perfect” structural state. By “perfect” structural state, it is meant that there are (a) no structural defects on its lattice, (b) no exo- or endohedral contaminants (synthesis/catalysis residues) and (c) the CNTs are in an isolated state (no CNT agglomeration). Those three conditions are quite challenging to achieve in the praxis.
\nWhen it comes to CNTs, different synthesis methods have to be considered. CNT synthesis renders unavoidably contaminants (sulphur/amorphous carbon) and catalyst particles. The most common synthesis methods employed are chemical vapour deposition (CVD), arc discharge and laser ablation. The CVD synthesis is the one with the highest capacity to be scaled to industrial quantities and provides a better control on the morphology of the obtained CNTs [4,5] in comparison with other standard synthesis methods. Yet, the defect state is usually high and should be thoroughly analysed before the application.
\nMost of the recent research works are leaning towards commercially available MWCNTs as starting material for the composite production. Some of the most recurring suppliers are Nanocyl (Belgium), Nanolab Inc. (USA), Iljin Nanotechnology Co. Ltd (Korea), Bayer MaterialScience (Germany), Chengdu Organic Chemicals Co. Ltd (China), Chinananotech Co. Ltd (China) and Hanhwa Nanotech Co. Ltd (Korea) to name just a few [6–31]. But also self-produced CNTs are used for composite manufacturing. For this purpose, catalytic chemical vapour deposition (CCVD) is the most common way to synthesize CNTs that are used as reinforcement phase in composites [6,7,10,32–39]. The MWCNTs generally show a purity between 90% [10] and 99.5% [19], but mostly around 95%. The diameter ranges from 10 nm to 80 nm with a length of 0.5 µm–50 µm [6–39]. All the information about CNT-MMCs in this book chapter is derived from the research works of the last ten years, including some relevant exceptions.
\nConsidering that commercial CNTs are usually delivered in agglomerated form, different methods have to be employed to disaggregate and blend them with the metallic matrix material. There are a lot of dispersing and blending processes like magnetic stirring [40], nanoscale dispersion processing [18,21,41], colloidal mixing [6,16,22,26–31,41–49], molecular-level mixing [7,9,11,12,14,24,25,50–54], particle composite system mixing [15,55], friction stir processing [56], layer stacking [57], ball milling [8,10,17,19,20,22–24,32–36,38,50,53,58–74], dipping [75] or roller mixing [37,76]. However, three of them have to be pointed out as the most commonly used ways to disperse and blend CNT metal matrix systems. These three processing methods are ball milling, molecular-level mixing and colloidal mixing. The methods will be briefly commented in the following paragraphs.
\nIt is usually performed using a planetary or attrition ball mill. The mixing is done by filling in the Metal powders and reinforcement phase together with some hard balls into mixing jars and rotating the jar with a certain rotational speed (Figure 1 a).
\nSchematic draft of the ball milling process (a). The used balls are hitting the CNTs and the matrix powder material (b), welding and integrating the two components (c) and bounce of the powder particle to restart this process again at another spot (d).
During the rotational movement, the added balls are falling on top of the powder material (Figure 1 b), thus leading to a size reduction, particle welding and integration of CNTs into the matrix powder material (Figure 1 c and d) generated by the impact energy. Different ball materials and sizes, rotational speeds, balls to powder ratios, gas atmospheres and mixing times can be chosen as main mixing parameters. Usually, a process control agent, for example ethanol, is added in order to prevent cold welding of the matrix material powder particles. In other cases, like mechanical alloying, a cold welding of the particles is desired. Ball milling is known to produce a homogenous distribution of reinforcement phase in metal matrix composites as particle agglomerates are segmented, and dispersed CNTs are partially welded together with the matrix powder material (Figure 1 d). In general, high energy ball milling and low energy ball milling are distinguished in literature when it comes to the mixing process of CNTs with metal matrix material. This is because of the main drawback of the method, which is the increasing defect density of CNTs during the mixing process by the direct application of large contact pressures (up to 30 GPa) [77]. Using low energy ball milling, this unwanted effect can be reduced, but it will not vanish. The importance of a low defect density of CNTs will be discussed later on in entry 2.2 [8,10,17,19,20,22–24,32–36,38,50,53,58–74].
\nFor this mixing method, it is of utmost importance to functionalize the CNTs, for example with an acid treatment (Figure 2 a). After this, the CNTs can be dispersed in various solvents, for example using ultrasonic agitation to obtain a stable suspension.
\nSchematic draft of the molecular-level mixing method. CNTs are functionalized by functional groups, which will be covalently bond onto the CNTs surface (a). After this, metal ions can electrostatically interact with the functional groups, thus coating the CNT surface with metal ions (b). These ions are transformed to a pure metal layer by calcination and reduction under temperature and H2, N2 or CO atmosphere (c). Finally, the CNTs are fully decorated or even integrated in the metal matrix material (d).
A metal salt is added and reduced by an added reducing agent to form a metal oxide CNT suspension with the CNTs acting as nucleation centres for the metal oxide formation (Figure 2 b). Finally, after washing off all the remaining chemicals, the powder is calcinated and then reduced, for example under hydrogen atmosphere to reduce it to the metal/CNT powder (Figure 2 c and d). The advantage of this process is that the CNT particles are embedded or coated by the metal matrix, thus resulting in very homogeneous distributions within the metal matrix (Figure 2 d). In many other mixing methods, the reinforcement phase can only be situated at the grain boundaries, offering weak interfacial bonding between the reinforcement phase and the matrix material and reducing the homogeneity of the distribution. For the molecular-level mixing process, this is not true, therefore being favoured for applications where a good connectivity of the reinforcement phase network is needed like thermal or electrical applications. The main drawback of the method is the required functionalization, which involves breaking up covalent carbon bonds to add functional groups to the surface of CNTs, thus diminishing their outstanding properties [7,9,11,12,14,24,25,50–54].
\nFor colloidal mixing, the CNTs are dispersed using an ultrasonic bath, homogenizer or magnetic stirrer in a solvent (for the most part, ultrasonic agitation is used (Figure 3 a)). There are many different solvents that allow for a fine and stable dispersion of the CNTs, which is discussed in [81] (e.g. DMF or ethylene glycol). The dispersion grade and stability of the CNT suspensions are not only depending on the used solvent, but also on the surface of the used CNTs. Some research works functionalize the surface of the CNTs to obtain electrochemically stable dispersions, which works great but influences the physical properties of CNTs as already discussed for the molecular-level mixing. Other works avoid functionalization, thus using the pristine CNTs, retaining their properties in detriment of the dispersion quality.
\nSchematic draft of the colloidal mixing method. First, the CNTs are dispersed in a liquid solvent using ultrasonic agitation, after which the matrix material powder is added (a). The two components are mixed again by ultrasonic agitation (c), and the solvent is evaporated (c) to finally obtain the mixed CNT/metal matrix powder (d).
One point that is controversially discussed is the impact of ultrasonic agitation on the defect density of CNTs. There are studies claiming for a rise in the defect density as a function of the time spent in the ultrasonic bath and others which report the opposite. The observed decrease in the defect density might be a misinterpretation of Raman spectra of disentangled CNTs (which would render improved ID/IG ratio stemming from the avoidance of intertube interactions). After the dispersion of CNTs in the solvent, the metal powder is added and mixed with the dispersed CNTs again by ultrasonic agitation, stirring or a homogenizer (Figure 3 b). Finally, the solvent is evaporated to obtain a dry mixed powder (Figure 3 c and d). A significant advantage of this method is that it can be very easily upscaled and still yield the same results [6,16,22,26–31,41–49].
\nAfter merging the CNT/metal composite powders, different densification methods are used for the consolidation of the final samples. Examples of these are cold pressed sintering (CPS) [8,14,17,20,27,28,34,35,47,53,63,74,78], hot uniaxial pressing (HUP) [10,19,26,27,29–31,39,40,47,49,62,67–70], spark plasma sintering (SPS) [6,7,9,11,12,14–16,18,21,23–25,42,44–46,48,50–52,55,64,75,79,80], hot or cold rolling [7,50,59,60,64], hot extrusion [18,20,23,40,58,79], high pressure torsion (HPT) [22,31–33,41,54,61,65,66,71,73], friction stir processing [56], hot isostatic pressing (HIP) [22,57], microwave sintering [43], laser engineered net shaping (LENS) [36–38,76] or a combination of those methods. Methods like cold or hot rolling, hot extrusion or HPT are often used for post-processing of the already consolidated samples [7,22,31,50,59,60,64]. The most often used methods for the production of metal matrix composites are CPS, HUP and SPS, which will be described briefly in the following.
\nThis is by far the simplest method to densify the blended powder. Using a uniaxial press or an isostatic press, the powder is pre-compacted to the desired shape (Figure 4).
\nSchematic draft of pressureless sintering or cold pressed sintering. A die is filled with the powder material, which is then pressed uniaxial to a green pellet. The sample is then removed and sintered without pressure in a furnace under vacuum or inert gas atmosphere.
After this, the sample is sintered without further pressure under vacuum or an inert gas atmosphere to form the consolidated sample (Figure 4). Even though one heating–cooling cycle might be very time-consuming (the resistive furnaces usually have a very limited heating rate), it has the advantage that many samples of dissimilar shapes can be sintered at the same time, making this sintering method very time efficient. However, the densification mechanism is mainly based on lattice and grain boundary diffusion [81], and large porosities cannot be closed without applying pressure, thus resulting in a poor final density of the composite [8,14,17,20,27,28,34,35,47,53,63,74,78].
\nIn addition to lattice and grain boundary diffusion (mechanisms for pressureless sintering), plastic deformation and creep can be major sintering mechanisms. As the overall densification rate of a compact is a function of the sum of the active densification mechanisms, pressure-assisted sintering is much more effective than pressureless sintering. The application of an external pressure leads to an increase in the densification driving force and kinetics. As grain growth is not related to the applied external pressure, it is more effective in systems with a large grain growth to densification rate. To sum up, by using an external pressure, the sintering temperature as well as the sintering time can be reduced [81].
\nSchematic draft of the hot uniaxial pressing method. A pre-compacted green pellet is inserted in a die, and uniaxial pressure is applied while the pellet is heated by induction under vacuum or inert gas atmosphere. The densified sample is finally removed.
When it comes to HUP, as with the CPS method, the mixed powder is usually pre-compacted using a uniaxial press or an isostatic press to obtain green pellets. After this, the green pellets are typically inserted in a die (often a steel die) where two punches (e.g. alumina) exert a uniaxial pressure onto the sample (Figure 5). The heating of the sample is usually conducted by induction, and thus, this system is very limited in the heating rate, rendering HUP as a very time-consuming sintering process. However, high pressures (several hundred MPa) can be applied with this method while sintering and almost full densification can be achieved (as punches with good mechanical properties can be used). To conclude, HUP is a time-consuming way to sinter samples, but it is also very effective when it comes to the final maximum densification of the sample [10,19,26,27,29–31,39,40,47,49,62,67–70].
\nThe active sintering mechanisms in SPS do not vary much from the active mechanisms in HUP. Yet, it provides a much quicker way to consolidate the composite powders [81].
\nSchematic draft of the Spark plasma sintering method. A graphitic die is filled with the powder material, and a uniaxial pressure is applied via two graphite punches. A pulsed electric DC is applicated, which leads to the heating of the sample by its electrical resistance. The process is conducted under vacuum or inert gas atmosphere.
As with HUP, the mixed powders are pre-compacted using a uniaxial press or an isostatic press to obtain green pellets, which are inserted in a graphite die. With this method, graphite punches are used to allow for inducing a pressure at the sample and conducting a pulsed electric DC through the sample at the same time (Figure 6). The sample is heated by its electrical resistance, which depends on the used material. By controlling the used current, the heating rate can be adjusted. This method allows for a very high heating rate of several hundred °C/min, being therefore very time efficient. In contrast to HUP, the used pressure during sintering is much lower (typically about 50 MPa) because of the mechanically weak graphite punches. However, as with HUP, almost full densification can be reached with this method. Overall, this method offers a quick and effective way to consolidate the CNT-reinforced metal matrix powders, therefore being the most employed method in this area [6,7,9,11,12,14–16,18,21,23–25,42,44–46,48,50–52,55,64,75,79,80].
\nThe main application of the CNT-reinforced metal matrix composites is in structural applications. This is due to the fact that most of the literature is devoted to the study of the mechanical properties of the composites. From the mechanical point of view, the addition of an intrinsically strong second phase would certainly improve the overall properties. Considering that, in the ideal state, the CNTs show a Young’s modulus of approximately 1 TPa and a maximum tensile strength of over 60 GPa [82], it is easy to trace their influence. Additionally, a set of factors influences the mechanical behaviour of these composites. First, it has been demonstrated that the addition of CNTs acts on the grain boundary mobility by hindering their displacement during grain growth [83–85]. This effect influences the final microstructure (by refining it) and thus the mechanical behaviour (grain boundary strengthening). Second, a proper distribution of CNTs acts as an obstacle for dislocation movement, activating another strengthening mechanism known as particle dispersion strengthening (Orowan strengthening). Third, it has been shown that the CNTs present a very low or even negative coefficient of thermal expansion (CTE) in a wide temperature range [86,87]. When combined with high CTE materials (such as metals), this CTE mismatch acts also as a strengthening factor. Finally, considering the aforementioned values of the mechanical properties of the CNTs, the strengthening of the composite due to load transfer is expected to be significant. Summarizing, the addition of CNTs to MMCs is clearly expected to be beneficial in terms of the improvement of the mechanical behaviour, and subsequently, it is clear why most of the studies are focused towards this feature. The strengthening effect of the CNTs in MMCs is shown in Figure 4. There, the measured yield strength improvement of different systems is given as a function of the CNT volume concentration in the composite. The scattering of results is related to the different mixing and processing methods that were employed. In this context, it becomes clear that after a direct comparison of different research works involving a wide span of production methods for the same system, the task of correlating dissimilar results becomes non-trivial. Due to a lack of available information on the yield strength of Ni-CNT composites, this illustration provides only a summary of the mechanical reinforcement effect that was achieved so far with Al-CNT and Cu-CNT MMC systems.
\nYield strength improvement against the volume fraction of CNTs in (a) Al/CNT composites [
However, the transport properties occupy also a large amount of the research in this field. CNTs are predicted to have the highest thermal conductivity known (SWCNT: 6600 W/m.K [88], MWCNT: 3000 W/m.K [89]) and are expected to present a ballistic type of electrical conduction mechanism [90,91]. Both factors are of utmost importance when considering that the material to be improved is a metal (which usually shows very high thermal and electrical properties). However, it is critical to obtain individual CNTs after dispersion, since the transport properties could be reduced up to one order of magnitude If the CNTs are in agglomerated form [92]. In this regard, some parts of the research on Cu-CNT were aimed at the improvement of the thermal properties. Cho et al. observed an improvement of the thermal conductivity for very low CNT concentrations (up to 1 vol. %) [42]. For larger CNT concentrations, the agglomeration of CNTs starts to play a fundamental role in the conductivity decrease. The same effect was observed by Yamanaka et al. for Ni-CNT [46]. Inversely, Firkowska et al. tested several functionalization routes so as to improve the interface in Cu-CNT composites and thus the thermal transport [14]. They observed that for all cases, the degradation of the CNT’s intrinsic thermal properties was so relevant and that it was not able to increase the thermal conductivity of the composites in any case.
\nThe electrical behaviour was also studied in several MMC-CNT systems, usually resulting in reduced conductivity. The major factor influencing this behaviour is the presence of agglomerates that, analysed from an electrical transport point of view, are seen as voids. This happens mainly due to the fact that the interfaces between CNT agglomerates and the metal matrices are weak. Only marginal improvements in conductivity were observed for low CNT concentrations in Ni/CNT composites [46].
\nThe tribological properties of CNT-reinforced composites have also been reported in the literature. In most cases, a reduction in both the coefficient of friction (COF) and wear has been observed. In the case of Ni-CNT composites, the COF was reduced in margins from 40 [37] to 75 % [27]. Regarding the Cu-CNT system, the COF reductions ranged from 50 to 75 % [6,8,43,51,63]. For both systems, the reduction in wear losses achieved in certain cases up to 6 [51], 7 [27] and 8 [43] times that of the reference metal under the same experimental conditions.
\nThe former is usually traced back to a solid lubricant activity of the CNTs during the experiments [37]. Due to their high mechanical properties, they tend to act as rolling second phases at the interface between the rubbing surfaces, thus avoiding the direct contact between the surfaces. In some cases, also the development of a graphitic layer is observed, acting as a solid lubricant [37]. The wear reduction is mainly correlated to the increase in the mechanical properties of the composite, which—as already stated—is generated by a stabilization of the microstructure due to grain boundary pinning. Moreover, Kim et al. stated that a reduction in the wear loss might be due to the reduction in the grain peeling mechanism due to a CNT anchoring of the matrix grains [51].
\nAl/CNT composites are mainly interesting, because of their high potential being a lightweight, reinforced material, which can be used in manifold applications. Therefore, Al/CNT composites have been in the focus of research since 1998 [40] and the interest is still growing.
\nThere is a large variety of starting materials on the market that have been used to fabricate the composites. Some of the most mentionable suppliers for Al powders are ECKA Granules Japan Co. Ltd (Japan), Aluminium Powder Company Ltd (United Kingdom), Alpha Industries (South Korea) and AlfaAesar (Germany) [18,19,21,58,61,62]. The range of used powders goes from several µm up to 75 µm in mean particle size, having different particle shapes and various purity grades between >99% and >99.99% [18,22,39–41,50,56–59,79]. The most used blending method for Al/CNT composites is ball milling [19,20,22,23,50,58–62].
\nA detailed overview of the research papers in the Al/CNT composite manufacturing can be found in Table 1.
\nReference | \nBlending method | \nSintering method | \nCNT content | \nRelative density | \n
---|---|---|---|---|
300 rpm for 0.5h, drying in vacuum furnace. | \nAl case and preheated for 1.5 h at 873 K in vacuum (0.53 Pa) and then compressed with 100 MPa in steel dies for 60 min. The heating and loading rates were 29.1 K/min and 10 MPa/ min, respectively. Then, the composites are extruded at 773 K (extrusion ratio = 25 : 1) at a speed of 10 mm/min | \n5 vol% 10 vol% | \n94% 96.2% | \n|
MPa for more than 30 min. | \n1 wt% 4 wt% 10 wt% | \nXXX | \n||
Mixing by sonication for 5min and then evaporation of the solvent. | \napplied pressure of 2.5GPa. The rotation is initiated 5s after the load application and terminated after 30 turns. | \n5 wt% | \n98.4% | \n|
gas atomized Al powder, CNTs and natural rubber. The precursor is heat treated at 500 °C for 2 h in an argon atmosphere (1 l/min) to evaporate the natural rubber. | \n600 °C, holding time of 20 min, heating rate of 40 °C/min and pressure of 50 MPa. The sintered compact was extruded in a 60° conical die at 400 °C with a pressure of 500 kN. The extrusion velocity and the extrusion ratio were fixed at 2mm/min and 20, respectively. | \n5 vol% | \nSintered: 96.1% Hot extruded: 98% | \n|
and 6h using 75 stainless steel milling balls (10mm diameter); giving a ball-to-powder weight ratio of 10:1. The jars are filled with argon and 2ml of methanol is added. | \nHot extrusion of the compact is conducted at 500°C using an extrusion ratio of 4:1. | \n2 wt% | \nXXX | \n|
gas atomized Al powder, MWCNTs and natural rubber. The precursor was heat treated at 500 °C for 2 h in an argon atmosphere (1 l/min) to evaporate the natural rubber. | \n480, 500, 560, and 600°C with a heating rate and holding time of 40 °C/min and 20 min, respectively. A pressure of 50 MPa is used. SPSed compacts were extruded in a 60° conical die at 400 °C with a 500 kN press. The extrusion velocity and extrusion ratio were fixed at 2mm/min and 20, respectively | \n1 vol% | \nUp to 96.8% | \n|
chips are ball-milled at 500 rpm under argon atmosphere for up to 48 h. The ball-to-chip weight ratio was 15:1. A control agent of 1.0 wt% stearic acid is added. The composite powder is then produced by ball-milling 18-h A2024 powder and CNTs | \nof 450 °C and then hot rolled with every 12% reduction per a pass; the initial thickness was 20mm, and the final thickness was 1 mm. | \n1 vol% 2 vol% 3 vol% | \nXXX | \n|
powder was solely ball-milled for 18h or 12h and then mixed with CNTs by ball-milling for 6h. Or Aluminium powder is directly mixed with CNTs by ball milling for 6h. | \nof 450°C, 480°C or 530°C and then hot rolled with every 12% reduction per a pass; the initial thickness was 20mm and the final thickness was 1 mm. | \n1.5 vol% 3 vol% 4.5 vol% 6 vol% 7.5 vol% 9 vol% | \n96.3%- 99.9% depending on parame ters. | \n|
argon atmosphere; 360 rpm, Ø 10mm ball, 10:1 ball to powder weight ratio, and 20 wt% heptane was used as the process control agent. | \nfor 5min under a uniaxial pressure of 57 MPa. | \n5 vol% 10 vol% 15 vol% | \n100% | \n|
obtained by ball milling of near- spherical powder with an initial ball-to-powder weight ratio of 20:1 and 423 rpm for several hours in flowing Ar atmosphere with water cooling. The as-prepared Al nanoflakes are first surface modified by PVA with 1700–1800 repeat units and then mixed with a CNT suspension, which is then heated in flowing Ar atmosphere at 500 °C for 2 h to remove the PVA. 1kg blend in 8 hours. | \nunder 500 MPa pressure, and then sintered in flowing Ar atmosphere at 550 °C for 2h. Then heated to 440 °C with a heating rate of 10 °C/min within a vacuum furnace installed with the extruder. And extruded with an extrusion ratio of 20:1 at a ram speed of 0.5 mm/min. | \n0.5 vol% 2 vol% | \nAfter CPS: 80-85% After hot extrusion: > 99.5% | \n|
solution and CNTs are mixed by tumbler ball milling for 48 h, followed by drying in vacuum at 100 °C. The PVA-coated CNTs, Cu(CH3COO)•2 H2O and 2 M NaOH aqueous solution are dispersed in water and heated to 80 °C to form a CNT/CuO composite. This is followed by vacuum filtering and reduction at 300 °C under a hydrogen atmosphere. CNT/Cu composite powders and Al powders are then mixed using a planetary mill for 3 h with rotation speed of 200 rpm; the ball to powder ratio was 10:1. The composition of the Al–Cu matrix is Al-4wt%. | \nat 500 °C for 5 min in a vacuum of 10-3 torr under a pressure of 50 MPa . The CNT/Al–Cu composites are solution heat treated at 550 °C for 12 h and quenched in a water bath at room temperature. They were then cold rolled to achieve 5% plastic deformation. The composites are finally aged at 130 °C for 0 to 24 h. | \n2 vol% 4 vol% | \nXXX | \n|
treated at 500°C for 2 h in an argon atmosphere (1 l/min) in order to evaporate the natural rubber. | \ntime 20 min, heating rate 40 °C/min, and pressure 50 MPa. Then heat- treated in an alumina pan at 670 °C and at 800 °C for 1 h in an argon atmosphere (1 l/min) inside a tube furnace. | \n5 vol% | \n96% | \n|
Plates of aluminium alloy are used as the substrate materials. Holes with a depth of 3.5 mm and a diameter of 0 mm, 2 mm, 4 mm, 6 mm, 8 mm and 10 mm respectively were drilled in the aluminium plates, which are then filled with various quantities of CNTs. | \ntilt angle of 2° is applied on the fixed pin tool during FSP. The pitch distance was 0.3 mm. The forward velocity of the rotating pin is kept as a constant of about 30 mm/min, and a rotational speed of 950 rpm is used. Five passes on the same position were conducted on each plate. | \n1.6 vol% 2.5 vol% 4.4 vol% 5.3 vol% 6 vol% | \nXXX | \n|
pressure of ~1 GPa. Then, the green compacts are compressed and deformed under the applied pressure of 6 GPa at room temperature. The rotation of the lower anvil was started after 30 seconds of load application with a rotational speed of 1 rpm and was terminated after various numbers of revolutions up to 15. | \n3 vol% | \n98.5% - 99.5% | \n||
and dispersed in ethanol by sonication. Then, Al powders and CNT suspension were mixed by mechanical stirring and simultaneously heated in order to evaporate most of the ethanol. The slurry is then processed in a high energy ball mill for 2 h with 250 rpm. Drying is accomplished at 60 °C using a vacuum oven. | \ncompaction, capsule free method HIP is accomplished under pressure of 103 MPa, at 600 °C for 30 min. Straining was carried out at room temperature, by torsion to 5 revolutions, under pressure of about 5 GPa and at rotation speed of 2 rpm. The specimens are then annealed in vacuum for 3 h at temperatures of 100 °C, 150 °C, 200 °C and 250 °C. | \n0.5 vol% 1 vol% 1.5 vol% 2 vol% | \nXXX | \n|
CNTs are added to a solution composed of 4 wt.%, PVA dissolved in distilled water. This mixture is magnetically stirred at 1000 rpm during 1 h, followed by a sonication at energies between 40 and 60 kJ and a power of 100W. Finally, this mixture is cured at room temperature in a Petri dish for 8 days. The composite sheets are cut into small sections and stretched at a rate of 2mm/min in a tensile machine at 80 °C. Then, two composite sheets of polymer/CNTs are alternately stacked with three aluminium sheets. | \nThe pressure and temperature are raised gradually during 1.5 h to 40MPa and 650 °C for 30 min. This allows for the evaporation of PVA and aluminium diffusion between the sheets to finally produce the consolidation of the composite. | \n0.5 wt% 2 wt% | \nXXX | \n|
88-12 wt% and CNTs are mixed using 12 steel milling balls with 10-mm diameter, presenting a ball-to-powder weight ratio of 10:1. The jar was placed in a rotation device, and the mixing was made with a constant rotation speed of 40 rpm, during 6 days (low-energy ball milling). | \nof 35MPa and a temperature of 550°C during 10min. | \n2 wt% 4 wt% 6 wt% | \nXXX | \n|
powder is milled with 2 wt.% stearic acid. The powder is sealed in a ZrO2 jar together with 600 g ZrO2 media balls (10mm in diameter) in an argon gas atmosphere. The rotation speed is 200 for 240 min. Then, Al-flake powder is mechanically bathed in isopropyl alcohol-based solution with ~1 wt.% zwitterionic surfactants and 1 wt.% CNTs in a plastic bottle on a rocking ball milling machine for 120 min. Thirty-gram ZrO2 media balls were added to assist the coating of CNTs on flaky powders. | \nSintering at 800 K, 850 K and 900 K. The heating rate is 20 K/min and the holding time at target temperatures is 60min. A pressure of 30MPa is applied on the sample under a vacuum of ~5 Pa. Before hot extrusion, the sintered sample is preheated to 700 K and kept for 180 s under an argon gas atmosphere. Then, the billet is immediately put into a steel container) and extruded through a die. The extrusion ratio and the ram speed are 37:1 and 3mm/s, respectively. | \n1 wt% | \n>99% | \n
Summary of blending and sintering methods for the production of Al/CNT composites.
In all the analysed articles, CNT agglomeration is observed, being the size and amount of those agglomerates strongly related to the chosen dispersion method. Specifically, in those reports where ball milling is used, a significant clustering is noticed. This might be due to the use of non-functionalized CNTs that tend to easily re-agglomerate during processing. Yet, the utilization of functionalized CNTs in ball milling mixed blends would not bring any further improvement, since the structural quality of the CNTs would be significantly lower. However, despite the presence of unavoidable agglomerates, very fine cluster dispersion and a homogeneous distribution can be observed. Interestingly, one would assume that the formation of clusters would be detrimental to the proper densification of the composites. However, as already depicted in Table 1, the final densities of the composites were never below 94%. The formation of clusters is one of the most challenging problems to overcome when dealing with CNTs, since a trade-off between an optimal initial agglomerate disentanglement and the lowest possible damage to the CNT structural state must be found. There are two ways to observe the amount of agglomerates in the composites. Certain reports focus on the evaluation by electron microscopy on the polished surface of the samples, whereas other authors evaluate fracture surfaces of the composites. Both approaches are valid, in the sense that they show a good overview of the agglomeration. However, SEM imaging of the surface would allow a further quantification of the agglomerates size and distribution by segmenting the C-containing phases. Bakshi proposed an interesting methodology to quantify the dispersion, based on distance calculation algorithms from electron micrographs, which can be found in
If we focus our attention on the CNT degradation during blending and after densification, we observe dissimilar results obtained by Raman spectroscopy, even for the same manufacturing method. For example, in samples densified by SPS (a technique known to exert strong thermomechanical stress on the CNTs), negligible variation of the ID/IG ratio is reported [23,79] as opposed to an increase in the defect density in other reports [18]. It is therefore very difficult to discern whether the sintering process has indeed any sort of influence on the CNT degradation. It has been already reported that given the strong stresses from SPS, CNTs are usually either damaged or degraded within the matrix material [94]. When strong shear forces are applied as in the case of HPT, sharp increases in the D band intensity are measured, depicting a modification of the graphitic structure. In all cases, an increased amount of structural damage would favour the reactivity of the CNT shells.
\nThe CNT degradation is a major issue when working with metals which are strong carbide builders [95]. It is well known that aluminium tends to form a stable carbide (Al4C3) in a wide compositional range [96], being of brittle nature and having the major drawback of being water soluble [97]. Some authors mention that the formation of this carbide would not be as detrimental as expected [18,58], since it only sacrifices the outermost CNT layer, providing an optimal interface with the matrix. However, despite being able to efficiently transfer the applied load, the utilization of the composite in structural applications in humid environments would lead to an interfacial degradation. Another way to obtain this carbide is by transitioning from Al2O3 to Al4C3 [98]. Yet, this phase transition occurs only under certain circumstances that are rarely achieved in solid-state processing.
\nReports on the solid-state processing of Cu/CNT systems deal with a variety of different raw materials, blending methods and sintering techniques, therefore sticking out in the research field of CNT-reinforced metal matrix composites.
\nWhen it comes to the used Cu starting material, a great many of commercially available powders or chemicals are employed, making it very hard to compare the Cu/CNT systems of different publications. The materials used depend directly on the blending and production process that has been used. The range goes from nanosized to almost 100 µm sized Cu powder particles, having different particle shapes (spherical, dendritic) and various purity grades between >99.5% and >99.95% [6–12,14,15,32–35,42–44,50,52–55,63–71]. The most used blending methods are ball milling, molecular-level mixing or colloidal mixing, each having their advantages and disadvantages as discussed in the introduction [6–12,14–17,32–35,42–45,51–55,63–75]. But especially for Cu, molecular-level mixing is employed very often, using copper compounds in solvents that have to be chemically treated in order to become pure copper (e.g. copper(II) acetate monohydrate, Cu(II) sulphate pentahydrate or simply CuO). Some prominent suppliers for the Cu starting materials are Sigma-Aldrich (USA), Alfa Aesar GmbH & Co. KG (Germany), Chang Sung Co. (Korea), Junsei Chemical Co. Ltd (Japan), Kojundo Chemical Lab. Co. Ltd (Japan), TLS Technik GmbH (Germany) or New Materials Research Co. Ltd (China) [6,12,14–16,32,33,42,54].
\nTherefore, to review the progress in Cu/CNT composites, a detailed comparison of blending methods, sintering techniques and achieved final relative composite densities has to be conducted, which can be found in Table 2.
\nReference | \nBlending method | \nSintering method | \nCNT content | \nRelative density | \n
---|---|---|---|---|
are milled for 8 h in an organic liquid. Then, CNTs are sensitized, activated and finally coated by electroless nickel. Copper- and nickel-coated CNTs are mixed for 30 min in a ball mill. | \nat a pressure of 600 MPa at 100 °C for 10 min under vacuum. Then sintered at 800 °C for 2 h. | \n4 vol% 8 vol% 12 vol% 16 vol% | \n97.5% 97.5% 97% 95% | \n|
sensitized, activated and then coated by electroless nickel for 15 min. Then, copper powder and nickel- coated CNTs are mixed by ball milling for 30 min. | \nat a pressure of 600 MPa at 100 °C for 10 min under vacuum. Then sintered at 800 °C for 2 h. | \n4 vol% 8 vol% 12 vol% 16 vol% | \n97.5% 97.5% 97% 95% | \n|
powder and CNTs are mixed through high energy ball milling process for 24h with 150rpm. | \nPre-compacted under a pressure of 10 MPa and then sintered at 700 °C for 1 min in vacuum (0.13 Pa) under a pressure of 50 MPa with a heating rate of 100 °C/min. Finally, the samples are cold rolled up to 50% reduction, followed by full annealing at 650 °C for 3 h. | \n5 vol% 10 vol% | \n99.3% 99.1% | \n|
purified and functionalized by acid treatment. Then, Cu acetate monohydrate is added and sonicated for 2h. The solution is vaporized with magnetic stirring at 100 °C, followed by calcination at 350 °C in air. and reduction under N2 atmosphere. | \nfor 1 min in vacuum( 0.1 Pa) with a pressure of 50MPa and a heating rate of 100 K/min. | \n5 vol% 10 vol% | \n99% 99% | \n|
CNTs were purified under sonication for 10 hours and then functionalized. Then, 20 mg of CNTs are sonicated in 300ml ethanol for 2 hours. Cu(CH3COO)•2 H2O is added and sonicated again for 2 hours. After drying at 250 °C in air and calcinating at 300 °C in air, the powder is reduced under a hydrogen atmosphere. | \nunder a pressure of 10 MPa and then sintered at 550°C for 1 minute in vacuum (0.13 Pa) with a pressure of 50 MPa. The heating rate is 100°C/ min. | \n5 vol% 10 vol% | \n98 ± 2% 98 ± 1.5% | \n|
cleaned and functionalized. Then, 10.5 mg of CNTs are dispersed in 100 ml of oleylamine in an ultrasonic bath for 3 h. 3 g of copper acetate monohydrate is added and the solution is purged with argon for 1 h. Then, the mixture is heated to 523 K for 10 min with a heating rate of 10 K/min. After cooling, the powders are reduced at 573 K for 2 h under hydrogen atmosphere. | \nfor 1 min in vacuum (0.13 Pa) with a pressure of 50 MPa and a heating rate of 100 K/min. | \n5 vol% | \nXXX | \n|
Copper (II) sulphate pentahydrate, tri-sodium citrate monohydrate and CNTs are stirred with 500 rpm magnetic stirrer for 2 h at room temperature to suspend the CNTs in the solution. The equivalent formaldehyde amount is added with a rate of 0.1 ml/min within 30 min. The solution is filtered, washed and vacuum dried at 100°C for 2 h and finally reduced at 400°C for 30 min under hydrogen atmosphere. | \nfor 1 min with a pressure of 20 MPa under vacuum (0.13 Pa). | \n10 vol% 20 vol% 30 vol% 40 vol% | \n97.9% 97% 96. 7% 96% | \n|
in nitric acid in the ultrasonic bath. Mixing condition is 5000 rpm in rotary speed for 40 min. | \nfor 5 min. The heating rate is 100 °C/min and a pressure of 50 MPa is applied. | \n5 vol% 10 vol% 15 vol% | \n98.4% 98.6% 96.1% | \n|
argon protected environment at room temperature. The mass ratio of ball to powder is 10:1, and the milling time is 5 h. | \n500 MPa in air at room temperature. Then consolidated under 6 GPa for 5 revolutions at room temperature. | \n1 wt% | \nXXX | \n|
argon protected environment for 5 h | \nand then consolidated under 6 GPa for 5 revolutions at room temperature. | \n1 wt% | \nXXX | \n|
purified in nitric acid in an ultrasonic bath, then filtered,washed and dried at 120°C. The mixing is performed with 5,000 rpm for 40 min. | \nin vacuum (<5 Pa) with a pressure of 40-60 MPa for 5-10 min. The heating rate is 100°C/ min. | \n5 vol% 10 vol% | \n96.2% - 99.2% 95.3% - 98.9% | \n|
CNTs are sonicated in acid solution at 323 K for 24h. Then, Cu powder and CNTs were sonicated separately in ethanol solution for 1 h, blended, stirred for 30 min and oven-dried at 323 K. The powders are finally heat-treated at 623 K for 1 h in Ar–5% H2 atmosphere. | \nfor 1 min under a uniaxial pressure of 50 MPa. The heating rate is 50 K/min. | \n0.5 vol% 1 vol% 1.5 vol% 2 vol% 3 vol% 5 Vol% 10 vol% | \n96.8 - 99.0% | \n|
atmosphere and for different hours with 50 stainless steel balls (diameter of each ball: 10 mm, ball to powder ratio 10:1, milling speed: 200 rpm). For bronze composites, the chemical composition is Cu 79%, Sn 10%, Zn 3% and Ni 8%. | \nwith pressure of 40 MPa for Cu–CNT composites in Ar- atmosphere, whereas 800 °C and 40 MPa for Bronze–CNT composites. | \nCu 0.1 wt% Cu 0.5 wt% Cu 1 wt% Cu 2 wt% Cu 4 wt% Bronze 0.1 wt% Bronze 0.5 wt% Bronze 1 wt% Bronze 2 wt% Bronze 4 wt% | \n96.8% 96.8% 93.7% 91% 82.6% 95.9% 93.8% 88.9% 89.9% 85.6% | \n|
for 5 h in an organic liquid. | \nMPa, then sintered at 850 °C in vacuum atmosphere for 5 h. After cooling, a second pressing at 600 MPa and a second sintering are performed. | \n10 vol% | \n96% | \n|
cold pressing. Then consoli dated at RT and 373 K with a pressure of 2.5 GPa and 10 revolutions. | \n3 vol% | \n97% | \n||
and functionalized. Then, the CNTs are dispersed within ethanol by sonication. Cu (CH3- COO)• 2H2O is added to the CNT suspension and sonicated for 2 h. After vaporization at 333–373 K and calcination at 573 K in air, the powders are reduced at 523 K for 4 h under hydrogen atmosphere. | \nhydraulic press 130 kN. Then s intered in a tube furnace at 600 °C in vacuum (10.6 Pa) or 1 min in vacuum (0.13 Pa) with a pressure of 50 MPa. | \n5 vol% 10 vol% | \nXXX | \n|
CNTs are purified and oxidized using nitric acid treatment by sonication for 10 min at 60°C Then, the CNTs are sensitized and activated. The activated CNTs are introduced into the electroless copper bath and stirred for 30 min while using sonication. The coated CNTs are dispersed in ethanol with vigorous sonication for 10min after which the copper powder is added. The solution is stirred and evaporated at 120°C. The powder is finally mixed in an electric agate pestle mortar for 2 h. | \ncompacted in a hydraulic press. Sintering at 800°C with the soaking time of 5 min with a ramp rate of 12 °C/min. | \n5 vol% 10 vol% 15 vol% 20 vol% | \n95.5% 96% 96.5% 94% | \n|
CNTs are dispersed in deionized water using a sonotrode for a few seconds. The Cu powder is added. After further sonication of 1 min, the dispersion is immersed in liquid N2 for 2 min and freeze- dried at- 40 °C for 48 h in vacuum (12 Pa). | \n( <10 Pa) at 700°C with a heating rate of 100 °C/min for 6 min. The pressure of 100 MPa is gradually applied within the first minute of the dwell and maintained during the remaining 5 min. Samples are naturally cooled. | \n0.5 vol% 1 vol% 2 vol% 3 vol% 4 vol% 5 vol% 10 vol% 16 vol% | \n95% 96% 98% 96% 93% 93% 88% 78% | \n|
treated in acid at 60 °C for 4 h. Then, the CNTs are dispersed in acetone. The Cu powder and the CNTs dispersed in acetone are mixed through a high-energy ball milling process for 6 h at 300 rpm. | \ntemperatures of 850, 900 and 950° C for 2 h in argon atmosphere. | \n0.5 wt% 1 wt% 1.5 wt% 2 wt% 2.5 wt% 3 wt% 3.5 wt% | \nXXX | \n|
CNTs are functionalized by polymer wrapping and dispersed in 1 wt% Poly(sodium 4-styrenesulfonate) by sonication for 2 h and stirring overnight. Then, CNTs are oxidized, washed and suspended in water by ultrasonic treatment. Copper acetate is added. After 12 h, the suspension is heated up to 70 °C to evaporate the solvent. After calcination, the mixture is finally reduced under H2 at 350 °C for 2 h | \na hydraulic press 130 kN. Then sintered in a tube furnace at 600 °C in vacuum (10.6 Pa) for 60 minutes. compacted under a pressure of 6 kN. Then sintered at 600 °C for 5 min in a vacuum a pressure of 50 MPa and a heating rate of 100 °C/min. | \n0.2 wt% 1 wt% 3 wt% 10 wt% | \nXXX | \n|
Dispersion of CNT in ethanol (1 g/l) by sonication for 30 min. Cu(CH3COO)•2H2O (2g/ml) is dissolved in NH3•H2O (40%), mixed and sonicated for 30 min with the CNT dispersion. After solvent vaporization and calcination, the powder is reduced at 250 °C for 2 h under hydrogen atmosphere. | \nAt 550 °C (vacuum 0.1 Pa) under a pressure of 50 MPa for 5 min with a heating rate of 100 °C/min. Then hot rolled up to 50% reduction at 650 °C. | \n5 vol% | \nXXX | \n|
steel balls of Ø 3/8 inch (ball to powder ratio 5:1) under argon with 200 rpm for 20h. | \nwith 30 MPa pressure under vacuum (0.001 Pa) for 30 minutes. | \n5 vol% | \n93.4% | \n|
with Cu–Ti powders with 1200 rpm for 2h. Ball-to- powder weight ratio is 10:1. Alcohol is added. | \nunder an uniaxial pressure of 40 MPa | \n5 vol% 10 vol% 15 vol% | \n99% 98% 96% | \n|
CNTs are dispersed in deionized water using a sonotrode (a few s econds). Cu powder is then added and sonicated for one minute. The dispersion is immersed in liquid N2 for 2 min and freeze-dried at -40 °C for 48 h in vacuum (12 Pa). | \nPa) under a pressure of 100 MPa for 6 min with a heating rate of 100 °C/min. Then natural cooling. | \n5 vol% 8,4 vol% 17,1 vol% 33,2 vol% | \n96% 85% 82% 73% | \n|
pressing and consolidated at RT and 373 K with 2.5 GPa and 10 revolutions. | \n3 vol% | \n97% | \n||
functionalized in acidic solution. After washing and drying, they are dispersed in Sodium dodecyl sulphate (SDS). And coated with copper. Copper powder is ball milled for 10 h at 500 rpm using stainless steel balls (5 mm). Ball to powder ratio is 10:1 and ethanol is taken as a process control reagent. Copper- coated CNTs are milled together with previously milled Cu powder for 5 h at 250 rpm. | \nMPa pressure. Then sintering at 900°C for 4 h under vacuum (1.33 Pa). | \n0.5 wt% 1 wt% 1.5 wt% | \nXXX | \n|
CNTs are functionalized and treated with 250 ml of oleylamine at room temperature for 2.5 h. 3 g of copper (II) acetate monohydrate are added and the mixture is sealed and purged in an argon-protected environment for 4 h. After heating to 523 K with 10K/min for 15 min, the powder is cooled, calcinated at 573 K in air for 2 h and then reduced in a N2 atmosphere. | \nrpm with a load of 2.5 GPa at room temperature for 5 revolutions. The rotation is initiated 5 s after the load application. | \n5 vol% | \nXXX | \n|
steel balls of 10 mm diameter (ball to powder ratio 5:1) under argon atmosphere at 200 rpm for 20 h. | \nmin using 30 MPa uniaxial stress under vacuum (0.001 Pa). The compacts produced underwent delamination in the centre on cooling and were repressed at 725°C under same conditions. | \n0.2 vol% SWCNT 5 vol% SWCNT 10 vol% S WCNT 5 vol% MWCNT 10 vol% MWCNT | \n95% 99% 97% 96% 98% | \n|
Cu–0.76wt.% Cr alloying powder under argon atmosphere with a rotary speed of 1200 rpm for 120 min. A ball-to-powder weight ratio of 10:1 is used, and alcohol is added. | \ngreen density of 75% and then consolidated at 750 °C for 15 min with a heating rate of 50 °C/min and a pressure of 40 MPa . | \n5 vol% 10 vol% 15 vol% | \nXXX | \n|
steel balls for 1 h (ball-to- powder weight ratio was 15:1) and 15 rpm. | \nand 6 GPa using 10 revolutions at a constant speed of 1 rpm. | \n5 vol% 10 vol% | \n99% 99% | \n|
Copper powder and CNTs are dispersed separately in 60 ml ethanol using sonication. CNTs were sonicated for 1 h, stirred for 5 min, sonicated again for 30 min and stirred again for 3 min. Copper powder is sonicated in ethanol for 1 h and stirred for 2 min. The slurries are mixed together, sonicated for 1 h and stirred for 3 min. After drying using a rotary evaporator, the powder is annealed for 30 min at 550 °C with a heating rate of 5 °C/min under inert Ar atmosphere to reduce the oxygen content. | \na vacuum of 1 hPa. A constant pulse-to-pause ratio of 10:5 (10 ms on and 5 ms off) is applied under a pressure of 50 MPa. | \n1 vol% | \n97% | \n|
sonicated in acetone for 20 and cleaned in nitric acid for 1 h. Cu and Fe powder is milled for 15h. Then, CNTs are added and milled a gain for 15h using chromium steel balls under argon atmosphere with 300 rpm and a ball to powder weight ratio of 20:1 | \nXXX | \nXXX | \nXXX | \n|
Cu0.5 Ti powder into a zwitterionic surfactant water solution (3-(N,N-dimethyl stearylammonio) propanesulfonate) with CNTs. The powders are then dried at 353 K for 7200 s in air. To remove surfactant films, powders are heated to 873K in H2 and Ar atmosphere. | \n1800 s under 30 MPa in vacuum (6 Pa). The compacts are preheated at 1073K for 800s with a heating rate of 1K/s in Ar atmosphere. After preheating, immediately extruded by using hydraulic press under an extrusion ratio of 12.8. | \n0.19 wt% 0.34 wt% | \nXXX | \n|
atmosphere for 3 h at 200 rpm using 10 mm balls, with a 10:1 ball to powder weight ratio and 0.5 wt% of stearic acid. | \nat a load of 150 MPa and a temperature of 973 K with a holding time of 30 min. Then, HPT process at room temperature with 6 GPa and various numbers of revolutions. | \n4 vol% | \n99.6% | \n|
and NbSe2 are coated with copper by electroless plating. CNTs and NbSe2 are mixed with Cu powder mechanically. | \npressed with 200 MPa and sintered at 750 °C for 2 h in N2 shielding. The sintered compact is crushed, repressed at 400 MPa and sintered again at 750 °C for 2 h in N2 shielding. | \n1-4 vol% CNT with various amounts of copper-coated NbSe2 | \nXXX | \n|
are sonicated in ethanol for 1 h and stirred for 5 min using a magnetic stirrer. Then, Ru powder is added, combined with further sonication for 1 h and stirring for 3 min. Copper powder was ultrasonicated in ethanol for 1 h and stirred for 2 min. The slurries are mixed together and are sonicated for 1 h and stirred for 3 min. After drying, the powders are further blended in a Turbula T2F mixer for 1h at a speed of 101 revolutions per minute and finally annealed for 30 min at 550 °C with a heating rate of 5 °C/min under inert Ar atmosphere to reduce the oxygen content. | \nwith a heating rate of 80°C/min, a holding time of 5 min and a pressure of 50 MPa. | \n1 vol% CNT (600°C) 2 vol% CNT (600°C) 0.5 vol% CNT 0.5 vol% Ru (600°C) l vol% CNT 0.5 vol% Ru (600°C) 2 vol% CNT 0.5 vol% Ru (600°C) l vol% CNT 0.5 vol% Ru (650°C) 2 vol% CNT 0.5 vol% Ru (650°C) | \n98.28% 98.15% 97.72% 96.77% 96.15% 97.63% 97.08% | \n|
Cu–CNT nanocomposite powders are synthesized by 5h of ball milling, using a rotation speed of 300rpm; the ball-to-powder ratio is 5:1. | \nMPa of uniaxial pressure at room temperature. Then, the green pellet is warm-pressed at 500 MPa for 1 h at 500°C and finally sintered in a tube furnace at 950°C for 2 h under argon atmosphere | \n0.5 wt% 1 wt% 0.15 wt% 0.2 wt% 0.25 wt% 3 wt% 5 wt% | \nDecreasing density with increasing CNT content. | \n
Summary of blending and sintering methods for the production of Cu/CNT composites.
The only stable copper carbide known is the copper acetylide Cu2C2 [99]. It is usually observed as a transition phase during the purification of Cu and after the reaction of cuprous oxide with water [99]. In the studied Cu-CNT composites, no carbide was detected whatsoever. However, in certain cases, CuO and Cu2O were observed as a result of the selected manufacturing process. This issue is overcome by utilizing reagents (such as EDTA) or a reducing atmosphere as a post-processing method.
\nRegarding interfacial features, there is a publication that reported on the influence of adsorbed oxygen on the CNT surface on the interfacial strength, observing an improved interface but a reduction in the transport properties [14]. Theoretical simulations have demonstrated that the addition of oxygen-containing functional groups results in improved interfaces. The assertion is based on the fact that chemically active oxygen on CNT surfaces might improve the binding of metals with CNTs by enhancing the electron exchange between the metal and the carbon atoms or by directly interacting with the metal [100].
\nIn some cases, the presence of alloying elements in the matrix degraded the CNTs into carbides as for example: the presence of Al leads to the formation of Al4C3 [50], and the presence of Cr leads to the formation of Cr3C2 [70]. Another approach was considered by mixing the CNTs with a Cu-Ti alloy. Chu et al. showed that the CNTs reacted in the presence of Ti, resulting in a degradation of the CNTs into a TiC interphase, despite having only 0.85 wt% Ti in the mixture [68]. This reaction between the CNTs and the carbide forming alloying elements is usually referred to as an interfacial improvement, leaving aside the fact that the CNTs are likely degraded into a hardly improving second phase in the composites.
\nOn the other side, there are reports in which a seamless interface was achieved even avoiding any phase formation, as shown by Cho et al. [42]. This coherent interface would then result in the reduction of detrimental features such as thermal resistance.
\nIn certain cases, XRD is used to observe the possible interphase formation; however, it would not be sufficient to resolve it since the volume fraction of the formed phases would be low. HR-TEM is the most suitable way to characterize these interphases with the aid of SAED.
\nA very interesting way to overcome the reaction between the CNTs and the alloying elements was addressed by decorating the CNTs with Cu nanoparticles [14,43]. In this case, a good distribution was achieved, rendering improvements in hardness and thermal resistance, despite reducing the CNTs intrinsic properties.
\nThe analysis of the agglomeration and distribution of CNTs was, in all cases, qualitatively reported. As a general case, the CNT distribution was acceptable, with low reagglomeration activity. Both, the reaction with alloying elements as well as the covalent functionalization of the CNTs (as in MLM) tends to reduce significantly the intrinsic properties of the nanotubes, thus hindering an optimal exploitation of the CNT usage.
\nRegarding the adhesion of the reinforcement to the matrix, the best outcomes are observed when covalent functionalization is used (MLM) or an interphase is formed. In the case of non-functionalized CNTs, the adhesion to the matrix is poor, mainly due to a poor metal-CNT wettability [95].
\nFor Ni/CNT, as for the other composite materials, there is a large variety of starting materials that have been used to fabricate the composites. Suppliers that are found very frequent for Ni powders are Alfa Aesar (Germany) and Crucible research (USA) [26–31,36–38,47,76,78,80]. The range of used powders reaches from 120 nm up to 149 µm in particle size, having a dendritic or spherical morphology and showing a purity of 99.8% to 99.99% [24–31,36–38,46–49,76,78,80]. The most used blending method for Ni/CNT composites is colloidal mixing and ball milling [24,26–31,36,38,46–49].
\nA detailed overview of the research papers in the Ni/CNT composite manufacturing can be found in Table 3.
\nReference | \nBlending method | \nSintering method | \nCNT content | \nRelative density | \n
---|---|---|---|---|
Stirred with an ultrasonic homogenizer and a scroller is used as a means to obtain a homogenous mixture. The slurry is dried for 24 h using a porous Al2O3 board. | \nrate of 50K/min with a holding time of 1min. Sintered within the range of 673–1073 K. The sintering pressure is 50 MPa in vacuum (<5 Pa). | \n1 vol% (673 K) 1 vol% (773 K) 1 vol% (873 K) 1 vol% (973 K) 1 vol% (1073 K) 2 vol% (1073 K) 3 vol% (1073 K) 4 vol% (1073 K) 5 vol% (1073 K) 10 vol% (1073 K) | \n80% 94% 97% 97% 99% 99.5% 99.5% 99.9% 98.3% 97.5% | \n|
in a twin-roller mixer consisting of two rolls rotating in opposite directions (one clockwise and one anticlockwise). This mixing is carried out for 24 h. | \n10 vol% | \nXXX | \n||
in a twin-roller mixer consisting of two rolls rotating in opposite directions (one clockwise and one anticlockwise). This mixing is carried out for 24 h. | \naluminium garnet laser (power rating of 500 W, wavelength of 1.064 nm) is focused on the substrate to create a melt pool into which the powder feedstock is delivered through Ar gas (mass flow rate 3.5 l/min). Laser power of 400 W, 35 A current, hatch width of 6.35 mm, layer thickness of 0.01 in. | \n10 vol% | \nXXX | \n|
hours using two different sizes of tungsten carbide balls of diameter 12.7 and 6.35 mm. | \n(power rating of 500 W, wavelength of 1.064 nm) is focused on the substrate to create a melt pool into which the powder feedstock is delivered through Ar gas. Laser power of 300 W, 30 A current. | \n5 wt% | \nXXX | \n|
using two different sizes of tungsten carbide balls of diameter 12.7 and 6.35 mm. | \n(power rating of 500 W, wavelength of 1.064 nm) is focused on the substrate to create a melt pool into which the powder feedstock is delivered through Ar gas. | \n15 vol% | \nXXX | \n|
Merging of the dispersion of the CNTs in an ultrasound bath with N,N-dimethylfor mamide (DMF) and the subsequent addition of Ni powder. The CNT concentration is 0.023 mg/ml. After 10min in the ultrasound bath, the resulting solution was stirred to homogenize the mixture and then dried in a ventilated furnace. The powder is finally milled in an agate mortar. | \npressed with a pressure of 990 MPa. Then sintered in a vacuum (2 Pa) tube furnace at 950°C for 2.5 h. Or sintered in a hot uniaxial press in vacuum (0.2 Pa) at 750°C for 2.5h with an axial pressure of 264MPa. | \n1 wt% | \n93.7% (CPS) 95.5% (HUP) | \n|
CNTs were purified and functionalized by using HF, acid solution mixture of H2 SO4/HNO3. After cleaning and drying, they are dispersed in ethylene glycol solution by ultra-sonication and Ni(C2H3O2)2•4H2O is added. Then 2 M-NaOH and hydrazine are injected into the mixed solution, heated to 70 °C and kept 30 min. Finally, the reduction process of fabricated CNT/Ni composite powders is performed in H2 + CO mixed atmosphere for 2 h at 400°C. | \na pressure of 10 MPa. Sintered at 700 °C for 1 min under vacuum (0.13 Pa) employing a pressure of 50 MPa. The heating rate is maintained at 100 °C/ min. | \n6 vol% | \n98-99% | \n|
XXX | \npressing at 990 MPa and sintering at 950 °C for 2.5 h in vacuum. . | \n1 wt% 3 wt% 5 wt% | \n95-96% | \n|
Merging of the dispersion of the CNTs in an ultrasound bath with ethylene glycol and the subsequent addition of Ni powder. The CNT concentration is 0.2 mg/ml. After 10min in the ultrasound bath, the resulting solution was stirred to homogenize the mixture and then dried in a ventilated furnace. The powder is finally milled in an agate mortar. | \n990 MPa. Then sintered in a hot uniaxial press under vacuum (0.2 Pa) at 750 °C for 2.5 h with a 264MPa axial pressure. | \n1 wt% 2 wt% 3 wt% 5 wt% | \n95-97% | \n|
No mixing, only pure Ni (high purity 99.99%) with a size range from 1 to 5 μm. | \npressure of 5 MPa. Then sintered at 700, 850 or 1000 °C for 5 min under a controlled argon atmosphere under a pressure of 50, 65 or 80 MPa. The heating rate is maintained at 100°C/min. | \nXXX | \n96.8- 97.7% (700°C) 97.8-99% (850°C) 98.1 -99.2% (1000°C) | \n|
for 24 h at 400 rpm. For the MLM process, CNTs are purified and functionalized by acid treatment. After cleaning and drying, they are dispersed in ethylene glycol by ultra-sonication and Ni(C2H3O2)2•4H2O is added. Then, 2 M-NaOH and hydrazine are injected, the solution is heated to 70 °C and kept 30 min. Finally, the CNT/Ni composite powders are reduced in H2 + CO mixed atmosphere for 2 h at 400°C. | \npressure of 5 MPa. Then sintered at 800 °C for 5 min under controlled argon atmosphere under a pressure of 80 MPa. The heating rate is maintained at 100° C/min. | \n5 vol% | \nXXX | \n|
Functionalization of the metal powders and CNTs by zwitter-ionic surfactant, 3-(N,N-dimethylstearylammonio)- propane-sulfonate (ZW). Suspensions with varying concentration of ZW (0.04-0.10 wt%) in de-ionized water are heated to 353 K for 10 min with a fixed CNT concentration (0.1 wt%) and ultrasonicated for 15 min. The metal powder is submersed in 100 ml of the 0.06 wt% ZW-0.1 wt% CNT suspensions with varying amounts of dwell time from 1 to 6 h. The ZW-CNT-metal powder suspensions are then dried at 423 K in vacuum, and the dried powders are subsequently annealed in a vacuum furnace at 693 K for 10 min to decompose a majority of the surfactant. | \n650 °C in a vacuum environment of 6 Pa, using a holding time of 3 min and a pressure of 200 MPa. | \n0.1 wt% | \n93% (550°C) >97% (650°C) | \n|
Merging of the dispersion of the CNTs in an ultrasound bath with ethylene glycol and the subsequent addition of Ni powder. The CNT concentration is 0.2 mg/ml. After 10min in the ultrasound bath, the resulting solution was stirred to homogenize the mixture and then dried in a ventilated furnace. The powder is finally milled in an agate mortar. | \nwith an axial pressure of 990 MPa. Then densified by pressureless sintering (CPS) under vacuum (1 Pa) at 1223 K for 2.5 h. The second set is densified in a hot uniaxial press (HUP) under vacuum (0.1 Pa) at 1023 K also for 2.5 h. | \n1 wt% 2 wt% 3 wt% 5 wt% | \n95.5% (CPS) 98% (HUP) | \n|
Merging of the dispersion of the CNTs in an ultrasound bath with ethylene glycol and the subsequent addition of Ni powder. The CNT concentration is 0.2 mg/ml. After 10 min in the ultrasound bath, the resulting solution was stirred to homogenize the mixture and then dried in a ventilated furnace. The powder is finally milled in an agate mortar. | \nThen sintered at 950 °C for 2.5 h in vacuum. | \n1 wt% (6.5 vol%) 2 wt% (12 vol%) 3 wt% (18 vol%) 5 wt% (27 vol%) | \nXXX | \n|
Merging of the dispersion of the CNTs in an ultrasound bath with ethylene glycol and the subsequent addition of Ni powder. The CNT concentration is 0.2 mg/ml. After 10min in the ultrasound bath, the resulting solution was stirred to homogenize the mixture and then dried in a ventilated furnace. The powder is finally milled in an agate mortar. | \n990 MPa and then sintered in under vacuum (0.2 Pa) for 2.5 h at 750°C with a 264 MPa axial pressure. | \n1 wt% (6.5 vol%) 2 wt% (12 vol%) 3 wt% (18 vol%) 5 wt% (27 vol%) | \nUp to 99% | \n|
Merging of the dispersion of the CNTs in an ultrasound bath with ethylene glycol and the subsequent addition of Ni powder. The CNT concentration is 0.2 mg/ml. After 10min in the ultrasound bath, the resulting solution was stirred to homogenize the mixture and then dried in a ventilated furnace. The powder is finally milled in an agate mortar. | \nMPa and then sintered in under vacuum (0.2 Pa) for 2.5 h at 750°C with a 264 MPa axial pressure. | \n1 wt% (6.5 vol%) 2 wt% (12 vol%) 3 wt% (18 vol%) | \nXXX | \n|
Dispersion of CNTs in ethylene glycol (0.2 mg/ml) is mixed in an ultrasound bath with the metallic powders for 20 min and then evaporated to obtain a metal–CNT blend. | \n(0.1 Pa) for 2.5 h at 750°C at a compacting pressure of 264 MPa. The densified composites were further processed at room temperature inducing severe plastic deformation by HPT with 4 rotations applying a 4 GPa pressure. For the thermal stability studies, the HPT-processed samples are annealed at 573 K with a heating rate of 20°C/min and a dwell time of 3 h. | \n1 wt% 3 wt% | \nXXX | \n|
CNT concentration in ethylene glycol is 0.006 vol%. A homogenizer (5-min treatment) combined with an ultrasonic bath (20-min treatment) is used for the dispersion of the CNTs. After that, Ni powder is added and mixed with the CNT dispersion for 5 min using the homogenizer. Finally, the solvent is evaporated at 150°C in a furnace. | \nThen sintered in a hot uniaxial press (axial pressure of 264 MPa) in vacuum (0.2 Pa) at 750°C for 2.5 h. | \n6.5 vol% | \n98% | \n
Summary of blending and sintering methods for the production of Ni/CNT composites.
As observed in the other metal-CNT systems, agglomeration is observed in all cases. If the different blending methods are considered, it is very unlikely to obtain a predominantly individual CNT dispersion rather than a homogeneous cluster distribution. Nevertheless, this cluster distribution provides also diverse improvements with regard to microstructural refinement and properties enhancement. Furthermore, when the initial agglomerate size (as-received state) is considered, all dispersion methods render very good disaggregation. Regarding the damage to the CNTs during processing, it is clear that highly energetic processing as ball milling increases the amount of defects on the CNTs, whereas milder processing routes as colloidal mixing present a fairly unmodified state of the CNTs structure. Interestingly, the sintering process tends to help in the defect healing [29]. The application of temperature in a non-reactive environment (vacuum sintering of non-carbide forming metal matrices) diminishes the ID/IG ratio as observed with Raman spectroscopy. Furthermore, the purity index IG’/ID also is reduced, evidencing some sort of contaminant removal (e.g. amorphous carbon).
\nNickel does not form stable carbides [101]
Yamanaka et al. and Nguyen et al. show that the application of SPS rendered a very smooth interface between the CNTs and the matrix [46,48]. This was also observed in HR-TEM for hot pressed samples [29]. In general, all the different approaches have resulted in seamless interfaces that are later translated in improved mechanical properties [26,48], thermal properties [46], tribological [27,37] and thermal expansion behaviour [47,78]. Additionally, a proper interface would favour a grain boundary drag that improves the microstructural control by achieving refined microstructures [26,28,48].
\nAlthough a large amount of efforts was directed towards the development of CNT-MMCs systems, there is still a significant room for improvement. This statement is supported by the fact that as described, dissimilar results have been obtained by even using the same processing methods as well as the same type and amount of CNTs. This is generated by a scarcity of proper knowledge of each particular system. As an example, there is still an ongoing discussion in the community about the most suitable dispersion and blending methods for a certain application. Furthermore, it can be noticed that the impact of interphases on the physical properties of the composites is still not well understood. Thus, we foresee a very high potential to gain new insights on each particular system and subsequently achieve further developments in this field.
\nThe present work is supported by funding from the Deutsche Forschungsgemeinschaft (DFG, projects: MU 959/38-1 and SU 911/1-1). The authors wish to acknowledge the EFRE Funds of the European Commission for support of activities. This work was also supported by the CREATe-Network Project, Horizon 2020 of the European Commission (RISE Project No. 644013).
\nPneumothorax (PNX) is an abnormal collection of air in the pleural space. It is defined as primary spontaneous pneumothorax (PSP) or secondary, based on age, causes, and the requirement of different management [1].
A PSP usually occurs following the rupture of subvisceral pleural blebs and its cause is unknown. Most frequently, patients are males, healthy teenagers or young adults, and smokers [2].
Instead, a spontaneous secondary pneumothorax (SPS) is often associated with a known lung disease and the main cause is a chronic obstructive pulmonary disease (COPD). Other causes are, for instance, idiopathic fibrosis, acquired immunodeficiency syndrome (AIDS), and neoplastic disease. Secondary pneumothorax (SP) could also occur after a chest trauma (post-traumatic pneumothorax) or after invasive procedures (iatrogenic). A specific subgroup is represented by the catamenial pneumothorax, as discussed further on.
The annual incidence of SPS is in general 26 cases per 100.000 and it is more common in men with a 3:1 ratio. It is mainly observed in patients aged 50–60 years old [3, 4].
In general, symptoms include chest pain and shortness of breath, but symptoms could differ according to the cause of pneumothorax [5].
In the following chapter, all the aspects related to a secondary pneumothorax are described.
The annual incidence of an SP is approximately 6.3 cases per 100.000 in men and 2 cases per 100.000 in women, every year [3].
A SP may occur:
in the presence of pre-existing lung diseases, like COPD, infections (e.g., tuberculosis, necrotizing pneumonia, and pneumocystis carinii), inflammatory disease (e.g., rheumatoid arthritis, polymyositis and dermatomyositis, and systemic sclerosis);
in the presence of neoplastic disease (e.g., primary lung cancer, sarcoma metastases, and malignant pleural mesothelioma);
as a consequence of a chest trauma;
as a complication of medical or surgical procedures (iatrogenic pneumothorax); or
concomitant to other pre-existing pathologies (e.g., catamenial pneumothorax) [6].
Moreover, compared to a primary pneumothorax, SP afflicts patients with a known history of lung disease. For such reasons, an SP:
is less tolerated by patients because of a co-existing lung disease;
is generally characterized by the presence of a persistent air leak that does not tend to resolve spontaneously, requiring an active intervention; and
oxygen could be required to promote air reabsorption, especially in the case of subcutaneous emphysema.
Generally, the management of such patients is complex and the treatment requires a chest tube insertion, prolonged hospitalization, and consideration for a surgical procedure to induce pleurodesis.
The main cause of SP is COPD, with an incidence of 26 cases per 100.000 patients per year [7]; COPD is one of the three main causes of death in the world and one of the main causes of chronic disease [8].
Based on computed tomography (CT) images, COPD may be divided into:
emphysema- and airway-dominant COPD: SP generally occurs as a consequence of bullae disruptions (Figure 1);
nonemphysematous COPD.
Emphysema dominant COPD.
According to the GOLD guideline [9], COPD severity depends on pulmonary function, evaluated by means of a spirometry. The risk of an SP is higher in patients affected by severe COPD. Patients with FEV1 < 1 L and/or a FEV1/FVC < 40% are deemed at high-risk [10], with a common observance of severe hypoxemia associated with hypercapnia in case of pneumothorax [8].
The development of a secondary pneumothorax in COPD patients is a parameter of high mortality and, in fact, it has been demonstrated that each SP event increases fourfold the chances of death in such patients [11].
When a pneumothorax occurs in a COPD patient with a low respiratory function, it is common to observe severe hypoxemia caused by a lower ventilation-perfusion (V/Q) rate, which is capable to determine an incremented shunt that is directly proportional to the PNX size. Compensatory hypercapnia is often associated [8].
For such reasons, an SP onset in COPD patients is generally associated with a rapidly progressive dyspnea and pleuritic chest pain where a prompt management is mandatory.
Generally, COPD patients present with hyperinflated lungs and abnormal lung auscultation. A reduced or absent vesicular murmur associated with symptoms such as shortness of breath, low saturation, and hyperventilation should easily guide to diagnose a PNX.
A chest X-ray is mandatory to assess the presence of a PNX, which usually appears as a complete collapse of the lung. Seldomly, a subcutaneous emphysema may occur, concealing the PNX at the chest X-ray (Figure 2).
Massive subcutaneous emphysema. Red arrow to indicate the small size SP.
Generally, at chest X-ray, bullous lesions have a concave appearance while a pneumothorax has a concave profile (Figure 3).
The different appearance between an SP and bullae. Image a: a secondary pneumothorax in a COPD patient. At the chest X-ray, a pneumothorax has a concave profile. Image b: bulls lesion has a concave appearance.
In COPD patients, however, a CT scan is useful to better analyze the pneumothorax size and the severity of the lung disease. Moreover, The CT scan can help in distinguishing a big bulla from a true PNX. This may not be an easy task; however, if a bulla is detected, a chest tube is not always indicated, or if it is, it should be carefully placed under CT guidance, in order to avoid an iatrogenic rupture of the bulla determining a complex PNX, which potentially requires a surgical treatment.
It is important to remember that due to the underlying pathology and the low functional reserve, these patients could become suddenly critical in case of a PNX and should therefore be treated accordingly. For the same reason, even if the PNX is correctly treated by means of a chest drain, these patients still remain at a higher risk of death. Death causes are, in fact, associated with the onset of an acute or late respiratory failure [12, 13], or with a higher risk of developing sepsis as a consequence of pneumonia or empyema due to the pneumothorax management (i.e., chest tube and/or pleurodesis) [14].
Any noxa capable to affect the integrity of the visceral pleura and reduce the lung elasticity could be a cause of a secondary pneumothorax and therefore, a secondary pneumothorax may be diagnosed in the process of:
Infection: tuberculosis, necrotizing pneumonia, and
Interstitial diseases: cystic fibrosis, acute severe asthma. Idiopathic pulmonary fibrosis (IPF) is a chronic, progressive, and fibrosing lung disease of unknown etiology. The rates of pneumothorax range from 2 to 20% in patients with IPF, becoming the second cause of SP after chronic obstructive pulmonary disease (COPD) [15].
Inflammatory or connective-related diseases: such as rheumatoid arthritis, polymyositis, dermatomyositis, systemic sclerosis, Marfan’s syndrome, and Ehlers-Danlos syndrome.
Pneumothorax caused by tubercular infection.
Acquired immunodeficiency syndrome (AIDS) could be another cause of SP, likely related to an increased risk of developing cystic lesions in the sub-pleural space [16].
As in the case of primary pneumothorax, the treatment goals should aim at:
evacuating the pleural cavity from the air to restore the normal intrapleural negative pressure;
obtaining lung re-expansion and pleural apposition;
reducing the risk of recurrence.
According to the BTS guidelines, a secondary pneumothorax that occurred in a known diseased lung requires the insertion of a small-bore chest tube to drain the air in the pleural space [17].
Pneumothorax aspiration, which finds a treatment indication in the primary spontaneous pneumothorax, has a high-risk of failure, but it may be taken into account in the case of symptomatic patients with a small pneumothorax. A persistent air leak can be managed conservatively obtaining a complete resolution [17].
A talc slurry pleurodesis could be a nonsurgical therapeutic management option to be considered for persistent air leak in patients deemed unfit for surgery. According to the American College of Chest Physicians (ACCP) consensus, a talc slurry pleurodesis through the chest tube is indicated to avoid recurrence after the first episode [14].
By contrast, the BTS guidelines suggest pleurodesis in case of a recurrent SP or in case of a persistent air leak, which in COPD patients may resolve in a long time compared to non-COPD patients [18]. Surgery is an option in SP, but COPD patients may not be deemed fit enough for surgery because of their clinical status. A prerequisite for talc pleurodesis is a complete or major re-expansion of the lung. In case of partially expanded or nonexpandable lungs, other options should be advocated, such as permanent drains connected to a Heimlich valve. Furthermore, prior to proceeding to talc pleurodesis, the increased risk of a pulmonary restrictive dysfunction secondary to talc insufflation should be well pondered and discussed interdisciplinary.
Contrarily to the ACCP guidelines that suggest medical thoracoscopy or VATS as the first choice to perform talc pleurodesis, because of their lower morbidity, the BTS guidelines consider an open approach (thoracotomy) as the procedure of choice, limiting VATS procedures to unfit patients [17].
Furthermore, in nonsurgical patients with a persistent air leak a talc slurry via chest tube should be taken into consideration.
The 2021 GOLD guidelines consider as the main surgical option in high-grade COPD [9]:
lung volume reduction surgery (LVRS);
bullectomy/blebectomy, which are associated with an improvement of dyspnea and lung function;
lung transplantation: in very high-risk patients, with progressive COPD. Inclusion criteria are exacerbations associated with hypercapnia (pCO2 ≥ 50 mmHg), pulmonary hypertension, FEV1 < 20%, and/or a diffusing capacity for carbon monoxide (Dlco <20%) [9].
LVRS can improve survival in severe lung emphysema, mainly in the upper lobes localized emphysema, and low-ability exercise patients [17]. The National Emphysema Treatment Trial (NETT) identified four groups of patients [19] on the basis of their postoperative exercise tolerance and their emphysema pattern at the CT scan (Table 1).
Emphysema at CT scan | Pre-operative exercise capacity | LVRS risk of death | Survival | Post-operative exercise tolerance | Symptoms control |
---|---|---|---|---|---|
Upper lobe-predominant emphysema | Low | Lower than medical therapy | Improved | Improved within 3 years from surgery | Improved |
High | Not improved | Improved (years 1–3) | Improved (years 1–4) | ||
Non-upper lobe-predominant emphysema | Low | No effects | Not improved | No effects | |
High | Increased | Not improved | No effects | No effects |
Results in the four groups studied in the NETT trial.
The NETT demonstrated that the effects of LVRS are durable and that it is strongly recommended in upper lobe-predominant emphysema with low exercise capacity and should be considered for palliation in patients with upper lobe emphysema and high exercise capacity (Figure 5).
Results of NETT. Image D: Upper lobe–predominant emphysema with low exercise capacity group. The surgical group has a lower probability of death than the medical group.
Predominantly, the following endobronchial procedures find an indication in reducing the end-expiratory lung volume and to improve exercise tolerance:
endobronchial lung volume reduction with one-way valves (BLVR);
endobronchial coils filling;
thermal ablation.
Endobronchial valves are placed in segmental or lobar bronchi through rigid bronchoscopy, allowing peripheral lung deflation, lung volume reduction, and improvement of symptoms with an accepted mortality rate equal to 5–10% [20]. The valve mechanism does not permit air to go through the segmental or lobar bronchus during the inspiration but, instead, it allows it passage during the expiratory phase. The valves are available in multiple diameters, ranging from 4 to 8.5 mm.
In general, two main devices are available:
the “aspiration umbrella”, which is an implantable Intra-Bronchial Valve (IBV) that can be positioned via flexible bronchoscopy, leaving the umbrella shape adherent to the airway wall and limiting the airflow distally;
the Emphasis Bronchial Valve (EBV), which is able to prevent air entering in the lung during inspiration but allows outflow of air and secretion. A flexible aspiration valve is present in the endobronchial valve structure from which exhaled air and secretions can be cleared out or aspirated because of the unidirectional valve.
Both devices are inserted in the operating theater with the patient sedated and in spontaneous assisted (jet-) ventilation [21].
The VENT trial (Endobronchial Valve for Emphysema Palliation Trial) [22] is a two-arm, randomized, controlled, multi-center trial that showed a 4.3% FEV1 increase in the EBV group compared to the 2.5% in the control medical group.
However, the study shows that complications following the procedure may counterbalance the advantages of the procedure itself. In fact, on the one hand, patients may obtain an improvement in their respiratory function, and on the other hand, it may be associated with hemoptysis, pneumothorax with persistent air leak, and COPD exacerbations, which may occur more frequently in advanced, hyper-inflated emphysema patients. Moreover, as evidenced in the VENT trial, the 2-yrs mortality rate in the EBV group was 2.8% compared to no deaths in the control group, but the difference wasn’t statistically significant (p = 0.19).
Although rare findings, the main causes of SP from malignant diseases are primary cancers of the lung and pleura (e.g., mesothelioma) followed by infiltrative/metastatic pleural diseases, such as in the case of germ cell tumors, breast cancer, or osteogenic and soft tissue sarcomas metastasis [21, 22, 23].
The occurrence of an SP as the first manifestation of a lung cancer ranges between 0.03% and 0.05% and usually allows to detect the unknown presence of a lung tumor or metastasis [24] without affecting the prognosis [25, 26].
By contrast, a review published in 2010 analyzed data available in the literature concerning pneumothorax secondary to sarcoma, highlighting increased mortality in such patients compared to those without such complications [26].
Several hypotheses have been taken into account to explain the pathogenesis of pneumothorax secondary to malignant disease, which include (i) an alteration of the pleural surface following tumoral pleural infiltration; (ii) rupture of a necrotic tumoral nodule; and (iii) necrosis of subpleural metastases [27].
Moreover, adjuvant or neoadjuvant chemotherapy and/or radiotherapy treatments may alter the lung parenchymal structure. In these cases, the high-risk of infection associated with a reduced functional repair mechanism could enhance the risk of pleural alterations, possibly leading to a secondary pneumothorax. Also, a tumoral invasion of the small airways could be responsible for a distal alveolar space dilatation determining air-trapping, which may lead to rupture and pneumothorax.
The clinical presentation depends on the patients’ performance status according to their functional status and disease stage. Usually, clinical signs and symptoms are chest pain and shortness of breath.
A chest X-ray is mandatory to assess the presence of a pneumothorax, which usually appears as a complete collapse of the normal areas of the lung. A CT scan is useful to better analyze the pneumothorax size and to investigate a possible progression of disease.
Pneumothorax can be the first sign of neoplastic disease, especially when it assumes a recurrent nature in high-risk patients (heavy smokers, COPD), who will therefore undergo further investigations, which will lead to eventually diagnose the tumor.
Diagnosis and management of a secondary pneumothorax concomitant to a pulmonary neoplastic disease are the same for a pneumothorax happening in a pre-existing neoplastic condition. A chest tube is recommended according to its size and the clinical features of patients.
In case of a persistent air leak or in a recurrent pneumothorax, surgery is an option in order to investigate the causes and proceed to talc pleurodesis in case of nonoperable tumors or unfit for surgery patients. If surgery is contemplated, the surgeon may proceed to obtain a diagnosis in case this was not achieved previously, by means of pleural biopsy/wedge resection/lymph node sampling. Cases of recurrent pneumothorax as the first sign of pleural mesothelioma or sarcoma metastasis have been reported, identifying the thoracoscopic bullectomy as the key to the best diagnosis and treatment [28, 29].
Thoracic trauma is the third leading cause of death following abdominal injury and head trauma in polytrauma patients [30]. Management of chest trauma patients is complex and requires an interdisciplinary team with experience in anesthesia, critical care, and surgical disciplines, especially neurosurgery, trauma surgery, abdominal surgery, and thoracic surgery.
Blunt and penetrating chest traumas can be the cause of pneumothorax and trauma should be taken into account when discussing secondary pneumothoraces.
Thoracic trauma can be differentiated into blunt or penetrating.
Penetrating injuries, such as blade wounds and firearm injuries, are disruptive to tissue integrity. Gunshot and stabbing account for 10% and 9.5% of penetrating chest injuries, making these the most common etiology of penetrating trauma.
A blunt trauma (Figure 6) is a nonpenetrating injury of the chest. Blunt thoracic injuries are more common than penetrating injuries [30].
Pneumothorax after a barotrauma.
Blunt injuries can cause damage to organs and structures without disrupting the integrity of the tissue. Falls from a great height, motor vehicle accidents, and occupational accidents are the main mechanisms of blunt injuries [31, 32, 33].
Depending on the mechanism of injury (e.g., acceleration-deceleration and direct impacts on the chest) an SP may be detected and should be treated and investigated on the cause of its onset (rib fractures, tracheal/bronchial or esophageal disruptions, lung contusion, and lung laceration).
Particular attention is reserved for a tension pneumothorax, in which air enters the pleural space at each inspiration, while the air in the pleural space cannot escape from the pleural space due to the one-way valve mechanism. The continuous accumulation of air in the pleural space determines a lung collapse, hypoxia, tachypnea, and tachycardia, a mediastinal shift with compression of the contralateral lung and the superior vena cava (SVC), leading to respiratory distress and rapidly to respiratory failure with cardiovascular collapse.
Management of patients following major trauma should follow the standardized protocol of emergency and resuscitation advanced trauma life support guidelines (ATLS), and a primary survey of the airway, breathing, circulation, disability, and exposure (ABCDE approach) should be performed.
Particular attention is required in a tension pneumothorax because, if a prompt intervention is not carried out, can rapidly lead to death [34]. Immediate evacuation through a chest tube is mandatory as recommended by the ATLS [35].
In general, a chest tube has to be positioned in a post-traumatic pneumothorax, in order to stabilize the patient.
Once the patient is stabilized, radiological investigations, such as chest X-ray and chest CT scan are mandatory to identify the cause of pneumothorax and eventually determine the need for further treatments (surgery).
At the same time, minor blunt traumas may be cause of small pneumothoraces, which may not require a chest tube and can be treated conservatively with high flow oxygen, pain control, and repeated CXR [36].
Penetrating injuries are disruptive to tissue integrity, with direct communication between the pleural space and the external environment and they can be acutely life-threatening.
It is mandatory to know the mechanism of injury as the management may vary. For example, stab versus gunshot injury to the chest can result in different patterns of injury.
Depending on the penetrating trauma, immediate surgery may be deemed necessary and a chest tube is required to stabilize the patient for surgery (e.g., during patient transportation from the trauma site to the hospital). Frequently, when a post-traumatic pneumothorax is present it can be associated with a hemothorax [37].
Iatrogenic pneumothorax is a possible complication of several invasive procedures, such as a central venous line insertion (0.5–5%), thoracentesis (1, 5–7%), and CT-guided lung biopsy (1–6%); at times they can be associated with hemothorax (1% of all procedures) [38, 39].
In some cases, it may occur as a complication following bronchoscopic positioning of unidirectional valves in emphysematous patients [21].
The term “catamenial” derives from two Greek words meaning “pertaining to” and “monthly.”
Catamenial pneumothorax is defined as a recurrent accumulation of air in the pleural cavity in reproductive-age women.
A catamenial pneumothorax (CP) arises within 48–72 h from menstruation. It occurs in 3–6% of spontaneous pneumothoraces and most frequently involves the right side [40].
This kind of pneumothorax is, mainly, included in two syndromes:
the thoracic endometriosis syndrome (TES), which is associated with hemothorax and lung nodules. It is a rare clinical disease that sometimes is secondary to the presence of endometrial gland tissue in the lungs, pleura, diaphragm, and tracheobronchial tree [41]. TES has been reported for the first time in 1953, in a case report of a young woman that developed hemothorax. In 1958, Mauerer described recurrent pneumothoraces in association with menstruation and pelvic endometriosis [42].
the porous diaphragmatic syndrome: cases of CP without any evidence of endometrial implants, but secondary to the presence of diaphragmatic defects [43]. In rare cases, in fact, diaphragm fenestrations over the tendinous portion may be visualized during surgery and appear as orifices in the muscle, becoming the cause of pneumothorax.
The cancer antigen 125 (CA-125), a gynecological serum marker, has assumed a role in the diagnostic work-up for TES. In fact, high levels of CA-125 have been associated with recurrent SP with evidence of thoracic endometriosis, such as focal thoracic endometrial implants, during VATS procedures. On the contrary, patients without thoracoscopic evidence of endometrial disease have normal CA-125 serum level [44].
The presence of a CP is not always related to pelvic endometriosis.
In a prospective study, 32 women had a CP diagnosis, but only 2 had pelvic endometriosis associated [41].
The occurrence of PSP in women of childbearing age is not unusual and there appears to be an increased risk of recurrence during pregnancy and during parturition with potential risks to the mother and fetus.
A more recent case series and literature review have recommended the use of more modern conservative management methods for which favorable outcomes have now been experienced [17, 45]. Pneumothorax in pregnancy can be managed by simple observation, if the mother is not symptomatic, there is no fetal distress and the pneumothorax is small (<2 cm). Otherwise, aspiration can be performed, chest drain insertion being reserved for those with a persistent air leak or a greater pneumothorax.
To avoid spontaneous delivery or cesarean section, both of which have been associated with an increased risk of recurrence, the safest approach will usually be that of elective assisted delivery at or near term. Less maternal effort is required with forceps delivery, which is therefore preferable. Because of the risk of recurrence in subsequent pregnancies, a minimally invasive VATS surgical procedure should be considered few weeks from delivery. Successful pregnancies and spontaneous deliveries without pneumothorax recurrence have been reported after a VATS procedure [17, 45].
In contrast to the benign clinical course of a PSP, SP is associated with pre-existing underlying lung disease, trauma, or invasive procedures and can be a life-threatening event. Patients with pre-existing lung disease tolerate a pneumothorax less well, and the distinction between PSP and SSP should be made at the time of diagnosis to guide appropriate management. The consequences of a pneumothorax in patients with a pre-existing lung disease are significantly greater, and the management is potentially more complex than in PSP patients. Furthermore, SP is correlated to a higher morbidity and mortality compared to PSP. Differently from a PSP, where the management is well defined by different international guidelines, SP treatment may vary because of the clinical conditions, previous episodes, severity and duration of symptoms, and the presence of an underlying pulmonary disease. Its treatment will therefore vary accordingly, from observation to needle aspiration or thoracostomy tube drainage with or without pleurodesis and potentially escalating to an open thoracotomy or VATS procedures, as described in this chapter. In case of surgery in high-risk patients (e.g., COPD patients, frail patients), the risk of proceeding to surgery with the aim of resolving the underlying cause and securing the lung with adequate pleurodesis should be well pondered both from the surgical and anesthesiological point of view based onto the patients’ clinical status and consent.
As an Open Access publisher, IntechOpen is dedicated to maintaining the highest ethical standards and principles in publishing. In addition, IntechOpen promotes the highest standards of integrity and ethical behavior in scientific research and peer-review. To maintain these principles IntechOpen has developed basic guidelines to facilitate the avoidance of Conflicts of Interest.
",metaTitle:"Conflicts of Interest Policy",metaDescription:"As an Open Access publisher, IntechOpen is dedicated to maintaining the highest ethical standards and principles in publishing. In addition, IntechOpen promotes the highest standards of integrity and ethical behavior in scientific research and peer-review.",metaKeywords:null,canonicalURL:"/page/conflicts-of-interest-policy",contentRaw:'[{"type":"htmlEditorComponent","content":"In each instance of a possible Conflict of Interest, IntechOpen aims to disclose the situation in as transparent a way as possible in order to allow readers to judge whether a particular potential Conflict of Interest has influenced the Work of any individual Author, Editor, or Reviewer. IntechOpen takes all possible Conflicts of Interest into account during the review process and ensures maximum transparency in implementing its policies.
\\n\\nA Conflict of Interest is a situation in which a person's professional judgment may be influenced by a range of factors, including financial gain, material interest, or some other personal or professional interest. For IntechOpen as a publisher, it is essential that all possible Conflicts of Interest are avoided. Each contributor, whether an Author, Editor, or Reviewer, who suspects they may have a Conflict of Interest, is obliged to declare that concern in order to make the publisher and the readership aware of any potential influence on the work being undertaken.
\\n\\nA Conflict of Interest can be identified at different phases of the publishing process.
\\n\\nIntechOpen requires:
\\n\\nCONFLICT OF INTEREST - AUTHOR
\\n\\nAll Authors are obliged to declare every existing or potential Conflict of Interest, including financial or personal factors, as well as any relationship which could influence their scientific work. Authors must declare Conflicts of Interest at the time of manuscript submission, although they may exceptionally do so at any point during manuscript review. For jointly prepared manuscripts, the corresponding Author is obliged to declare potential Conflicts of Interest of any other Authors who have contributed to the manuscript.
\\n\\nCONFLICT OF INTEREST – ACADEMIC EDITOR
\\n\\nEditors can also have Conflicts of Interest. Editors are expected to maintain the highest standards of conduct, which are outlined in our Best Practice Guidelines (templates for Best Practice Guidelines). Among other obligations, it is essential that Editors make transparent declarations of any possible Conflicts of Interest that they might have.
\\n\\nAvoidance Measures for Academic Editors of Conflicts of Interest:
\\n\\nFor manuscripts submitted by the Academic Editor (or a scientific advisor), an appropriate person will be appointed to handle and evaluate the manuscript. The appointed handling Editor's identity will not be disclosed to the Author in order to maintain impartiality and anonymity of the review.
\\n\\nIf a manuscript is submitted by an Author who is a member of an Academic Editor's family or is personally or professionally related to the Academic Editor in any way, either as a friend, colleague, student or mentor, the work will be handled by a different Academic Editor who is not in any way connected to the Author.
\\n\\nCONFLICT OF INTEREST - REVIEWER
\\n\\nAll Reviewers are required to declare possible Conflicts of Interest at the beginning of the evaluation process. If a Reviewer feels he or she might have any material, financial or any other conflict of interest with regards to the manuscript being reviewed, he or she is required to declare such concern and, if necessary, request exclusion from any further involvement in the evaluation process. A Reviewer's potential Conflicts of Interest are declared in the review report and presented to the Academic Editor, who then assesses whether or not the declared potential or actual Conflicts of Interest had, or could be perceived to have had, any significant impact on the review itself.
\\n\\nEXAMPLES OF CONFLICTS OF INTEREST:
\\n\\nFINANCIAL AND MATERIAL
\\n\\nNON-FINANCIAL
\\n\\nAuthors are required to declare all potentially relevant non-financial, financial and material Conflicts of Interest that may have had an influence on their scientific work.
\\n\\nAcademic Editors and Reviewers are required to declare any non-financial, financial and material Conflicts of Interest that could influence their fair and balanced evaluation of manuscripts. If such conflict exists with regards to a submitted manuscript, Academic Editors and Reviewers should exclude themselves from handling it.
\\n\\nAll Authors, Academic Editors, and Reviewers are required to declare all possible financial and material Conflicts of Interest in the last five years, although it is advisable to declare less recent Conflicts of Interest as well.
\\n\\nEXAMPLES:
\\n\\nAuthors should declare if they were or they still are Academic Editors of the publications in which they wish to publish their work.
\\n\\nAuthors should declare if they are board members of an organization that could benefit financially or materially from the publication of their work.
\\n\\nAcademic Editors should declare if they were coauthors or they have worked on the research project with the Author who has submitted a manuscript.
\\n\\nAcademic Editors should declare if the Author of a submitted manuscript is affiliated with the same department, faculty, institute, or company as they are.
\\n\\nPolicy last updated: 2016-06-09
\\n"}]'},components:[{type:"htmlEditorComponent",content:"In each instance of a possible Conflict of Interest, IntechOpen aims to disclose the situation in as transparent a way as possible in order to allow readers to judge whether a particular potential Conflict of Interest has influenced the Work of any individual Author, Editor, or Reviewer. IntechOpen takes all possible Conflicts of Interest into account during the review process and ensures maximum transparency in implementing its policies.
\n\nA Conflict of Interest is a situation in which a person's professional judgment may be influenced by a range of factors, including financial gain, material interest, or some other personal or professional interest. For IntechOpen as a publisher, it is essential that all possible Conflicts of Interest are avoided. Each contributor, whether an Author, Editor, or Reviewer, who suspects they may have a Conflict of Interest, is obliged to declare that concern in order to make the publisher and the readership aware of any potential influence on the work being undertaken.
\n\nA Conflict of Interest can be identified at different phases of the publishing process.
\n\nIntechOpen requires:
\n\nCONFLICT OF INTEREST - AUTHOR
\n\nAll Authors are obliged to declare every existing or potential Conflict of Interest, including financial or personal factors, as well as any relationship which could influence their scientific work. Authors must declare Conflicts of Interest at the time of manuscript submission, although they may exceptionally do so at any point during manuscript review. For jointly prepared manuscripts, the corresponding Author is obliged to declare potential Conflicts of Interest of any other Authors who have contributed to the manuscript.
\n\nCONFLICT OF INTEREST – ACADEMIC EDITOR
\n\nEditors can also have Conflicts of Interest. Editors are expected to maintain the highest standards of conduct, which are outlined in our Best Practice Guidelines (templates for Best Practice Guidelines). Among other obligations, it is essential that Editors make transparent declarations of any possible Conflicts of Interest that they might have.
\n\nAvoidance Measures for Academic Editors of Conflicts of Interest:
\n\nFor manuscripts submitted by the Academic Editor (or a scientific advisor), an appropriate person will be appointed to handle and evaluate the manuscript. The appointed handling Editor's identity will not be disclosed to the Author in order to maintain impartiality and anonymity of the review.
\n\nIf a manuscript is submitted by an Author who is a member of an Academic Editor's family or is personally or professionally related to the Academic Editor in any way, either as a friend, colleague, student or mentor, the work will be handled by a different Academic Editor who is not in any way connected to the Author.
\n\nCONFLICT OF INTEREST - REVIEWER
\n\nAll Reviewers are required to declare possible Conflicts of Interest at the beginning of the evaluation process. If a Reviewer feels he or she might have any material, financial or any other conflict of interest with regards to the manuscript being reviewed, he or she is required to declare such concern and, if necessary, request exclusion from any further involvement in the evaluation process. A Reviewer's potential Conflicts of Interest are declared in the review report and presented to the Academic Editor, who then assesses whether or not the declared potential or actual Conflicts of Interest had, or could be perceived to have had, any significant impact on the review itself.
\n\nEXAMPLES OF CONFLICTS OF INTEREST:
\n\nFINANCIAL AND MATERIAL
\n\nNON-FINANCIAL
\n\nAuthors are required to declare all potentially relevant non-financial, financial and material Conflicts of Interest that may have had an influence on their scientific work.
\n\nAcademic Editors and Reviewers are required to declare any non-financial, financial and material Conflicts of Interest that could influence their fair and balanced evaluation of manuscripts. If such conflict exists with regards to a submitted manuscript, Academic Editors and Reviewers should exclude themselves from handling it.
\n\nAll Authors, Academic Editors, and Reviewers are required to declare all possible financial and material Conflicts of Interest in the last five years, although it is advisable to declare less recent Conflicts of Interest as well.
\n\nEXAMPLES:
\n\nAuthors should declare if they were or they still are Academic Editors of the publications in which they wish to publish their work.
\n\nAuthors should declare if they are board members of an organization that could benefit financially or materially from the publication of their work.
\n\nAcademic Editors should declare if they were coauthors or they have worked on the research project with the Author who has submitted a manuscript.
\n\nAcademic Editors should declare if the Author of a submitted manuscript is affiliated with the same department, faculty, institute, or company as they are.
\n\nPolicy last updated: 2016-06-09
\n"}]},successStories:{items:[]},authorsAndEditors:{filterParams:{},profiles:[{id:"396",title:"Dr.",name:"Vedran",middleName:null,surname:"Kordic",slug:"vedran-kordic",fullName:"Vedran Kordic",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/396/images/7281_n.png",biography:"After obtaining his Master's degree in Mechanical Engineering he continued his education at the Vienna University of Technology where he obtained his PhD degree in 2004. He worked as a researcher at the Automation and Control Institute, Faculty of Electrical Engineering, Vienna University of Technology until 2008. His studies in robotics lead him not only to a PhD degree but also inspired him to co-found and build the International Journal of Advanced Robotic Systems - world's first Open Access journal in the field of robotics.",institutionString:null,institution:{name:"TU Wien",country:{name:"Austria"}}},{id:"441",title:"Ph.D.",name:"Jaekyu",middleName:null,surname:"Park",slug:"jaekyu-park",fullName:"Jaekyu Park",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/441/images/1881_n.jpg",biography:null,institutionString:null,institution:{name:"LG Corporation (South Korea)",country:{name:"Korea, South"}}},{id:"465",title:"Dr.",name:"Christian",middleName:null,surname:"Martens",slug:"christian-martens",fullName:"Christian Martens",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Rheinmetall (Germany)",country:{name:"Germany"}}},{id:"479",title:"Dr.",name:"Valentina",middleName:null,surname:"Colla",slug:"valentina-colla",fullName:"Valentina Colla",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/479/images/358_n.jpg",biography:null,institutionString:null,institution:{name:"Sant'Anna School of Advanced Studies",country:{name:"Italy"}}},{id:"494",title:"PhD",name:"Loris",middleName:null,surname:"Nanni",slug:"loris-nanni",fullName:"Loris Nanni",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/494/images/system/494.jpg",biography:"Loris Nanni received his Master Degree cum laude on June-2002 from the University of Bologna, and the April 26th 2006 he received his Ph.D. in Computer Engineering at DEIS, University of Bologna. On September, 29th 2006 he has won a post PhD fellowship from the university of Bologna (from October 2006 to October 2008), at the competitive examination he was ranked first in the industrial engineering area. He extensively served as referee for several international journals. He is author/coauthor of more than 100 research papers. He has been involved in some projects supported by MURST and European Community. His research interests include pattern recognition, bioinformatics, and biometric systems (fingerprint classification and recognition, signature verification, face recognition).",institutionString:null,institution:null},{id:"496",title:"Dr.",name:"Carlos",middleName:null,surname:"Leon",slug:"carlos-leon",fullName:"Carlos Leon",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Seville",country:{name:"Spain"}}},{id:"512",title:"Dr.",name:"Dayang",middleName:null,surname:"Jawawi",slug:"dayang-jawawi",fullName:"Dayang Jawawi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Technology Malaysia",country:{name:"Malaysia"}}},{id:"528",title:"Dr.",name:"Kresimir",middleName:null,surname:"Delac",slug:"kresimir-delac",fullName:"Kresimir Delac",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/528/images/system/528.jpg",biography:"K. Delac received his B.Sc.E.E. degree in 2003 and is currentlypursuing a Ph.D. degree at the University of Zagreb, Faculty of Electrical Engineering andComputing. His current research interests are digital image analysis, pattern recognition andbiometrics.",institutionString:null,institution:{name:"University of Zagreb",country:{name:"Croatia"}}},{id:"557",title:"Dr.",name:"Andon",middleName:"Venelinov",surname:"Topalov",slug:"andon-topalov",fullName:"Andon Topalov",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/557/images/1927_n.jpg",biography:"Dr. Andon V. Topalov received the MSc degree in Control Engineering from the Faculty of Information Systems, Technologies, and Automation at Moscow State University of Civil Engineering (MGGU) in 1979. He then received his PhD degree in Control Engineering from the Department of Automation and Remote Control at Moscow State Mining University (MGSU), Moscow, in 1984. From 1985 to 1986, he was a Research Fellow in the Research Institute for Electronic Equipment, ZZU AD, Plovdiv, Bulgaria. In 1986, he joined the Department of Control Systems, Technical University of Sofia at the Plovdiv campus, where he is presently a Full Professor. He has held long-term visiting Professor/Scholar positions at various institutions in South Korea, Turkey, Mexico, Greece, Belgium, UK, and Germany. And he has coauthored one book and authored or coauthored more than 80 research papers in conference proceedings and journals. His current research interests are in the fields of intelligent control and robotics.",institutionString:null,institution:{name:"Technical University of Sofia",country:{name:"Bulgaria"}}},{id:"585",title:"Prof.",name:"Munir",middleName:null,surname:"Merdan",slug:"munir-merdan",fullName:"Munir Merdan",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/585/images/system/585.jpg",biography:"Munir Merdan received the M.Sc. degree in mechanical engineering from the Technical University of Sarajevo, Bosnia and Herzegovina, in 2001, and the Ph.D. degree in electrical engineering from the Vienna University of Technology, Vienna, Austria, in 2009.Since 2005, he has been at the Automation and Control Institute, Vienna University of Technology, where he is currently a Senior Researcher. His research interests include the application of agent technology for achieving agile control in the manufacturing environment.",institutionString:null,institution:null},{id:"605",title:"Prof",name:"Dil",middleName:null,surname:"Hussain",slug:"dil-hussain",fullName:"Dil Hussain",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/605/images/system/605.jpg",biography:"Dr. Dil Muhammad Akbar Hussain is a professor of Electronics Engineering & Computer Science at the Department of Energy Technology, Aalborg University Denmark. Professor Akbar has a Master degree in Digital Electronics from Govt. College University, Lahore Pakistan and a P-hD degree in Control Engineering from the School of Engineering and Applied Sciences, University of Sussex United Kingdom. Aalborg University has Two Satellite Campuses, one in Copenhagen (Aalborg University Copenhagen) and the other in Esbjerg (Aalborg University Esbjerg).\n· He is a member of prestigious IEEE (Institute of Electrical and Electronics Engineers), and IAENG (International Association of Engineers) organizations. \n· He is the chief Editor of the Journal of Software Engineering.\n· He is the member of the Editorial Board of International Journal of Computer Science and Software Technology (IJCSST) and International Journal of Computer Engineering and Information Technology. \n· He is also the Editor of Communication in Computer and Information Science CCIS-20 by Springer.\n· Reviewer For Many Conferences\nHe is the lead person in making collaboration agreements between Aalborg University and many universities of Pakistan, for which the MOU’s (Memorandum of Understanding) have been signed.\nProfessor Akbar is working in Academia since 1990, he started his career as a Lab demonstrator/TA at the University of Sussex. After finishing his P. hD degree in 1992, he served in the Industry as a Scientific Officer and continued his academic career as a visiting scholar for a number of educational institutions. In 1996 he joined National University of Science & Technology Pakistan (NUST) as an Associate Professor; NUST is one of the top few universities in Pakistan. In 1999 he joined an International Company Lineo Inc, Canada as Manager Compiler Group, where he headed the group for developing Compiler Tool Chain and Porting of Operating Systems for the BLACKfin processor. The processor development was a joint venture by Intel and Analog Devices. In 2002 Lineo Inc., was taken over by another company, so he joined Aalborg University Denmark as an Assistant Professor.\nProfessor Akbar has truly a multi-disciplined career and he continued his legacy and making progress in many areas of his interests both in teaching and research. He has contributed in stochastic estimation of control area especially, in the Multiple Target Tracking and Interactive Multiple Model (IMM) research, Ball & Beam Control Problem, Robotics, Levitation Control. He has contributed in developing Algorithms for Fingerprint Matching, Computer Vision and Face Recognition. He has been supervising Pattern Recognition, Formal Languages and Distributed Processing projects for several years. He has reviewed many books on Management, Computer Science. Currently, he is an active and permanent reviewer for many international conferences and symposia and the program committee member for many international conferences.\nIn teaching he has taught the core computer science subjects like, Digital Design, Real Time Embedded System Programming, Operating Systems, Software Engineering, Data Structures, Databases, Compiler Construction. In the Engineering side, Digital Signal Processing, Computer Architecture, Electronics Devices, Digital Filtering and Engineering Management.\nApart from his Academic Interest and activities he loves sport especially, Cricket, Football, Snooker and Squash. He plays cricket for Esbjerg city in the second division team as an opener wicket keeper batsman. He is a very good player of squash but has not played squash since his arrival in Denmark.",institutionString:null,institution:null},{id:"611",title:"Prof.",name:"T",middleName:null,surname:"Nagarajan",slug:"t-nagarajan",fullName:"T Nagarajan",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Universiti Teknologi Petronas",country:{name:"Malaysia"}}}],filtersByRegion:[{group:"region",caption:"North America",value:1,count:13389},{group:"region",caption:"Middle and South America",value:2,count:11661},{group:"region",caption:"Africa",value:3,count:4168},{group:"region",caption:"Asia",value:4,count:22334},{group:"region",caption:"Australia and Oceania",value:5,count:2019},{group:"region",caption:"Europe",value:6,count:33642}],offset:12,limit:12,total:135275},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{},books:[{type:"book",id:"9985",title:"Geostatistics",subtitle:null,isOpenForSubmission:!0,hash:"423cb3896195a618c4acb493ce4fd23d",slug:null,bookSignature:"Prof. Jeffrey M. Yarus, Dr. Marko Maucec, Dr. Timothy C. Coburn and Associate Prof. Michael Pyrcz",coverURL:"https://cdn.intechopen.com/books/images_new/9985.jpg",editedByType:null,editors:[{id:"78011",title:"Prof.",name:"Jeffrey M.",surname:"Yarus",slug:"jeffrey-m.-yarus",fullName:"Jeffrey M. Yarus"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10845",title:"Marine Ecosystems - Biodiversity, Ecosystem Services and Human Impacts",subtitle:null,isOpenForSubmission:!0,hash:"727e7eb3d4ba529ec5eb4f150e078523",slug:null,bookSignature:"Dr. Ana M.M. Marta Gonçalves",coverURL:"https://cdn.intechopen.com/books/images_new/10845.jpg",editedByType:null,editors:[{id:"320124",title:"Dr.",name:"Ana M.M.",surname:"Gonçalves",slug:"ana-m.m.-goncalves",fullName:"Ana M.M. Gonçalves"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11027",title:"Basics of Hypoglycemia",subtitle:null,isOpenForSubmission:!0,hash:"98ebc1e36d02be82c204b8fd5d24f97a",slug:null,bookSignature:"Dr. Alok Raghav",coverURL:"https://cdn.intechopen.com/books/images_new/11027.jpg",editedByType:null,editors:[{id:"334465",title:"Dr.",name:"Alok",surname:"Raghav",slug:"alok-raghav",fullName:"Alok Raghav"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11124",title:"Next-Generation Textiles",subtitle:null,isOpenForSubmission:!0,hash:"093f9e26bb829b8d414d13626aea1086",slug:null,bookSignature:"Dr. Hassan Ibrahim",coverURL:"https://cdn.intechopen.com/books/images_new/11124.jpg",editedByType:null,editors:[{id:"90645",title:"Dr.",name:"Hassan",surname:"Ibrahim",slug:"hassan-ibrahim",fullName:"Hassan Ibrahim"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11369",title:"RNA Viruses Infection",subtitle:null,isOpenForSubmission:!0,hash:"52f8a3a1486912beae40b34ac557fed3",slug:null,bookSignature:"Ph.D. Yogendra Shah",coverURL:"https://cdn.intechopen.com/books/images_new/11369.jpg",editedByType:null,editors:[{id:"278914",title:"Ph.D.",name:"Yogendra",surname:"Shah",slug:"yogendra-shah",fullName:"Yogendra Shah"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11433",title:"Human Migration in the Last Three Centuries",subtitle:null,isOpenForSubmission:!0,hash:"9836df9e82aa9f82e3852a60204909a8",slug:null,bookSignature:"Dr. Ingrid Muenstermann",coverURL:"https://cdn.intechopen.com/books/images_new/11433.jpg",editedByType:null,editors:[{id:"77112",title:"Dr.",name:"Ingrid",surname:"Muenstermann",slug:"ingrid-muenstermann",fullName:"Ingrid Muenstermann"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11438",title:"Fake News in the Era of Global Crises",subtitle:null,isOpenForSubmission:!0,hash:"5f61f975031e13ee705d8b5853f1aa58",slug:null,bookSignature:"Dr. David Eller",coverURL:"https://cdn.intechopen.com/books/images_new/11438.jpg",editedByType:null,editors:[{id:"476616",title:"Dr.",name:"Jack",surname:"Eller",slug:"jack-eller",fullName:"Jack Eller"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11447",title:"Swarm Intelligence - Recent Advances and Current Applications",subtitle:null,isOpenForSubmission:!0,hash:"f68e3c3430a74fc7a7eb97f6ea2bb42e",slug:null,bookSignature:"Dr. Marco Antonio Aceves Fernandez",coverURL:"https://cdn.intechopen.com/books/images_new/11447.jpg",editedByType:null,editors:[{id:"24555",title:"Dr.",name:"Marco Antonio",surname:"Aceves Fernandez",slug:"marco-antonio-aceves-fernandez",fullName:"Marco Antonio Aceves Fernandez"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11452",title:"Cryopreservation - Applications and Challenges",subtitle:null,isOpenForSubmission:!0,hash:"a6c3fd4384ff7deeab32fc82722c60e0",slug:null,bookSignature:"Dr. Marian Quain",coverURL:"https://cdn.intechopen.com/books/images_new/11452.jpg",editedByType:null,editors:[{id:"300385",title:"Dr.",name:"Marian",surname:"Quain",slug:"marian-quain",fullName:"Marian Quain"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11453",title:"Biomimetics - Bridging the Gap",subtitle:null,isOpenForSubmission:!0,hash:"173e62fa4d7bf5508cec3bdd8e3cb32d",slug:null,bookSignature:"Prof. Ziyad S. Haidar",coverURL:"https://cdn.intechopen.com/books/images_new/11453.jpg",editedByType:null,editors:[{id:"222709",title:"Prof.",name:"Ziyad S.",surname:"Haidar",slug:"ziyad-s.-haidar",fullName:"Ziyad S. Haidar"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11456",title:"Autonomous Mobile Mapping Robots",subtitle:null,isOpenForSubmission:!0,hash:"405e1f7c0ef62700f4d590722cf428be",slug:null,bookSignature:"Dr. Janusz Bȩdkowski",coverURL:"https://cdn.intechopen.com/books/images_new/11456.jpg",editedByType:null,editors:[{id:"63695",title:"Dr.",name:"Janusz",surname:"Bȩdkowski",slug:"janusz-bdkowski",fullName:"Janusz Bȩdkowski"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11459",title:"Soft Robotics - Recent Advances and Applications",subtitle:null,isOpenForSubmission:!0,hash:"06e947238d5d4ea1162509a5d66de887",slug:null,bookSignature:"Dr. Mahmut Reyhanoglu",coverURL:"https://cdn.intechopen.com/books/images_new/11459.jpg",editedByType:null,editors:[{id:"15068",title:"Dr.",name:"Mahmut",surname:"Reyhanoglu",slug:"mahmut-reyhanoglu",fullName:"Mahmut Reyhanoglu"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:27},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:7},{group:"topic",caption:"Business, Management and Economics",value:7,count:4},{group:"topic",caption:"Chemistry",value:8,count:16},{group:"topic",caption:"Computer and Information Science",value:9,count:18},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:8},{group:"topic",caption:"Engineering",value:11,count:42},{group:"topic",caption:"Environmental Sciences",value:12,count:5},{group:"topic",caption:"Immunology and Microbiology",value:13,count:8},{group:"topic",caption:"Materials Science",value:14,count:17},{group:"topic",caption:"Mathematics",value:15,count:9},{group:"topic",caption:"Medicine",value:16,count:68},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:3},{group:"topic",caption:"Neuroscience",value:18,count:3},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:7},{group:"topic",caption:"Physics",value:20,count:6},{group:"topic",caption:"Psychology",value:21,count:5},{group:"topic",caption:"Robotics",value:22,count:2},{group:"topic",caption:"Social Sciences",value:23,count:8},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:2}],offset:12,limit:12,total:495},popularBooks:{featuredBooks:[{type:"book",id:"7827",title:"Interpersonal Relationships",subtitle:null,isOpenForSubmission:!1,hash:"ebf41f4d17c75010eb3294cc8cac3d47",slug:"interpersonal-relationships",bookSignature:"Martha Peaslee Levine",coverURL:"https://cdn.intechopen.com/books/images_new/7827.jpg",editors:[{id:"186919",title:"Dr.",name:"Martha",middleName:null,surname:"Peaslee Levine",slug:"martha-peaslee-levine",fullName:"Martha Peaslee Levine"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10808",title:"Current Concepts in Dental Implantology",subtitle:"From Science to Clinical Research",isOpenForSubmission:!1,hash:"4af8830e463f89c57515c2da2b9777b0",slug:"current-concepts-in-dental-implantology-from-science-to-clinical-research",bookSignature:"Dragana Gabrić and Marko Vuletić",coverURL:"https://cdn.intechopen.com/books/images_new/10808.jpg",editors:[{id:"26946",title:"Prof.",name:"Dragana",middleName:null,surname:"Gabrić",slug:"dragana-gabric",fullName:"Dragana Gabrić"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10796",title:"Extracellular Vesicles",subtitle:"Role in Diseases, Pathogenesis and Therapy",isOpenForSubmission:!1,hash:"eb5407fcf93baff7bca3fae5640153a2",slug:"extracellular-vesicles-role-in-diseases-pathogenesis-and-therapy",bookSignature:"Manash K. Paul",coverURL:"https://cdn.intechopen.com/books/images_new/10796.jpg",editors:[{id:"319365",title:"Assistant Prof.",name:"Manash K.",middleName:null,surname:"Paul",slug:"manash-k.-paul",fullName:"Manash K. Paul"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10908",title:"Advances in Decision Making",subtitle:null,isOpenForSubmission:!1,hash:"126486f7f91e18e2e3539a32c38be7b1",slug:"advances-in-decision-making",bookSignature:"Fausto Pedro García Márquez",coverURL:"https://cdn.intechopen.com/books/images_new/10908.jpg",editors:[{id:"22844",title:"Prof.",name:"Fausto Pedro",middleName:null,surname:"García Márquez",slug:"fausto-pedro-garcia-marquez",fullName:"Fausto Pedro García Márquez"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"95",title:"Applications and Experiences of Quality Control",subtitle:null,isOpenForSubmission:!1,hash:"4bcb22b1eee68210a977a97d5a0f363a",slug:"applications-and-experiences-of-quality-control",bookSignature:"Ognyan Ivanov",coverURL:"https://cdn.intechopen.com/books/images_new/95.jpg",editors:[{id:"22230",title:"Prof.",name:"Ognyan",middleName:null,surname:"Ivanov",slug:"ognyan-ivanov",fullName:"Ognyan Ivanov"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"2160",title:"MATLAB",subtitle:"A Fundamental Tool for Scientific Computing and Engineering Applications - Volume 1",isOpenForSubmission:!1,hash:"dd9c658341fbd264ed4f8d9e6aa8ca29",slug:"matlab-a-fundamental-tool-for-scientific-computing-and-engineering-applications-volume-1",bookSignature:"Vasilios N. Katsikis",coverURL:"https://cdn.intechopen.com/books/images_new/2160.jpg",editors:[{id:"12289",title:"Prof.",name:"Vasilios",middleName:"N.",surname:"Katsikis",slug:"vasilios-katsikis",fullName:"Vasilios Katsikis"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"3560",title:"Advances in Landscape Architecture",subtitle:null,isOpenForSubmission:!1,hash:"a20614517ec5f7e91188fe8e42832138",slug:"advances-in-landscape-architecture",bookSignature:"Murat Özyavuz",coverURL:"https://cdn.intechopen.com/books/images_new/3560.jpg",editors:[{id:"93073",title:"Dr.",name:"Murat",middleName:null,surname:"Ozyavuz",slug:"murat-ozyavuz",fullName:"Murat Ozyavuz"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10739",title:"Global Decline of Insects",subtitle:null,isOpenForSubmission:!1,hash:"543783652b9092962a8fa4bed38eeb17",slug:"global-decline-of-insects",bookSignature:"Hamadttu Abdel Farag El-Shafie",coverURL:"https://cdn.intechopen.com/books/images_new/10739.jpg",editors:[{id:"192142",title:"Dr.",name:"Hamadttu",middleName:null,surname:"Abdel Farag El-Shafie",slug:"hamadttu-abdel-farag-el-shafie",fullName:"Hamadttu Abdel Farag El-Shafie"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10911",title:"Higher Education",subtitle:"New Approaches to Accreditation, Digitalization, and Globalization in the Age of Covid",isOpenForSubmission:!1,hash:"223a02337498e535e967174c1f648fbc",slug:"higher-education-new-approaches-to-accreditation-digitalization-and-globalization-in-the-age-of-covid",bookSignature:"Lee Waller and Sharon Waller",coverURL:"https://cdn.intechopen.com/books/images_new/10911.jpg",editors:[{id:"263301",title:"Dr.",name:"Lee",middleName:null,surname:"Waller",slug:"lee-waller",fullName:"Lee Waller"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"3568",title:"Recent Advances in Plant in vitro Culture",subtitle:null,isOpenForSubmission:!1,hash:"830bbb601742c85a3fb0eeafe1454c43",slug:"recent-advances-in-plant-in-vitro-culture",bookSignature:"Annarita Leva and Laura M. R. Rinaldi",coverURL:"https://cdn.intechopen.com/books/images_new/3568.jpg",editors:[{id:"142145",title:"Dr.",name:"Annarita",middleName:null,surname:"Leva",slug:"annarita-leva",fullName:"Annarita Leva"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"3737",title:"MATLAB",subtitle:"Modelling, Programming and Simulations",isOpenForSubmission:!1,hash:null,slug:"matlab-modelling-programming-and-simulations",bookSignature:"Emilson Pereira Leite",coverURL:"https://cdn.intechopen.com/books/images_new/3737.jpg",editors:[{id:"12051",title:"Prof.",name:"Emilson",middleName:null,surname:"Pereira Leite",slug:"emilson-pereira-leite",fullName:"Emilson Pereira Leite"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"1770",title:"Gel Electrophoresis",subtitle:"Principles and Basics",isOpenForSubmission:!1,hash:"279701f6c802cf02deef45103e0611ff",slug:"gel-electrophoresis-principles-and-basics",bookSignature:"Sameh Magdeldin",coverURL:"https://cdn.intechopen.com/books/images_new/1770.jpg",editors:[{id:"123648",title:"Dr.",name:"Sameh",middleName:null,surname:"Magdeldin",slug:"sameh-magdeldin",fullName:"Sameh Magdeldin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:12,limit:12,total:4797},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"7827",title:"Interpersonal Relationships",subtitle:null,isOpenForSubmission:!1,hash:"ebf41f4d17c75010eb3294cc8cac3d47",slug:"interpersonal-relationships",bookSignature:"Martha Peaslee Levine",coverURL:"https://cdn.intechopen.com/books/images_new/7827.jpg",publishedDate:"July 27th 2022",numberOfDownloads:7175,editors:[{id:"186919",title:"Dr.",name:"Martha",middleName:null,surname:"Peaslee Levine",slug:"martha-peaslee-levine",fullName:"Martha Peaslee Levine"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10808",title:"Current Concepts in Dental Implantology",subtitle:"From Science to Clinical Research",isOpenForSubmission:!1,hash:"4af8830e463f89c57515c2da2b9777b0",slug:"current-concepts-in-dental-implantology-from-science-to-clinical-research",bookSignature:"Dragana Gabrić and Marko Vuletić",coverURL:"https://cdn.intechopen.com/books/images_new/10808.jpg",publishedDate:"July 27th 2022",numberOfDownloads:1981,editors:[{id:"26946",title:"Prof.",name:"Dragana",middleName:null,surname:"Gabrić",slug:"dragana-gabric",fullName:"Dragana Gabrić"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10796",title:"Extracellular Vesicles",subtitle:"Role in Diseases, Pathogenesis and Therapy",isOpenForSubmission:!1,hash:"eb5407fcf93baff7bca3fae5640153a2",slug:"extracellular-vesicles-role-in-diseases-pathogenesis-and-therapy",bookSignature:"Manash K. Paul",coverURL:"https://cdn.intechopen.com/books/images_new/10796.jpg",publishedDate:"July 20th 2022",numberOfDownloads:2308,editors:[{id:"319365",title:"Assistant Prof.",name:"Manash K.",middleName:null,surname:"Paul",slug:"manash-k.-paul",fullName:"Manash K. Paul"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10908",title:"Advances in Decision Making",subtitle:null,isOpenForSubmission:!1,hash:"126486f7f91e18e2e3539a32c38be7b1",slug:"advances-in-decision-making",bookSignature:"Fausto Pedro García Márquez",coverURL:"https://cdn.intechopen.com/books/images_new/10908.jpg",publishedDate:"July 27th 2022",numberOfDownloads:1473,editors:[{id:"22844",title:"Prof.",name:"Fausto Pedro",middleName:null,surname:"García Márquez",slug:"fausto-pedro-garcia-marquez",fullName:"Fausto Pedro García Márquez"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"95",title:"Applications and Experiences of Quality Control",subtitle:null,isOpenForSubmission:!1,hash:"4bcb22b1eee68210a977a97d5a0f363a",slug:"applications-and-experiences-of-quality-control",bookSignature:"Ognyan Ivanov",coverURL:"https://cdn.intechopen.com/books/images_new/95.jpg",publishedDate:"April 26th 2011",numberOfDownloads:318571,editors:[{id:"22230",title:"Prof.",name:"Ognyan",middleName:null,surname:"Ivanov",slug:"ognyan-ivanov",fullName:"Ognyan Ivanov"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"2160",title:"MATLAB",subtitle:"A Fundamental Tool for Scientific Computing and Engineering Applications - Volume 1",isOpenForSubmission:!1,hash:"dd9c658341fbd264ed4f8d9e6aa8ca29",slug:"matlab-a-fundamental-tool-for-scientific-computing-and-engineering-applications-volume-1",bookSignature:"Vasilios N. Katsikis",coverURL:"https://cdn.intechopen.com/books/images_new/2160.jpg",publishedDate:"September 26th 2012",numberOfDownloads:271836,editors:[{id:"12289",title:"Prof.",name:"Vasilios",middleName:"N.",surname:"Katsikis",slug:"vasilios-katsikis",fullName:"Vasilios Katsikis"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"3560",title:"Advances in Landscape Architecture",subtitle:null,isOpenForSubmission:!1,hash:"a20614517ec5f7e91188fe8e42832138",slug:"advances-in-landscape-architecture",bookSignature:"Murat Özyavuz",coverURL:"https://cdn.intechopen.com/books/images_new/3560.jpg",publishedDate:"July 1st 2013",numberOfDownloads:243450,editors:[{id:"93073",title:"Dr.",name:"Murat",middleName:null,surname:"Ozyavuz",slug:"murat-ozyavuz",fullName:"Murat Ozyavuz"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10739",title:"Global Decline of Insects",subtitle:null,isOpenForSubmission:!1,hash:"543783652b9092962a8fa4bed38eeb17",slug:"global-decline-of-insects",bookSignature:"Hamadttu Abdel Farag El-Shafie",coverURL:"https://cdn.intechopen.com/books/images_new/10739.jpg",publishedDate:"July 20th 2022",numberOfDownloads:1582,editors:[{id:"192142",title:"Dr.",name:"Hamadttu",middleName:null,surname:"Abdel Farag El-Shafie",slug:"hamadttu-abdel-farag-el-shafie",fullName:"Hamadttu Abdel Farag El-Shafie"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10911",title:"Higher Education",subtitle:"New Approaches to Accreditation, Digitalization, and Globalization in the Age of Covid",isOpenForSubmission:!1,hash:"223a02337498e535e967174c1f648fbc",slug:"higher-education-new-approaches-to-accreditation-digitalization-and-globalization-in-the-age-of-covid",bookSignature:"Lee Waller and Sharon Waller",coverURL:"https://cdn.intechopen.com/books/images_new/10911.jpg",publishedDate:"July 13th 2022",numberOfDownloads:2082,editors:[{id:"263301",title:"Dr.",name:"Lee",middleName:null,surname:"Waller",slug:"lee-waller",fullName:"Lee Waller"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"3568",title:"Recent Advances in Plant in vitro Culture",subtitle:null,isOpenForSubmission:!1,hash:"830bbb601742c85a3fb0eeafe1454c43",slug:"recent-advances-in-plant-in-vitro-culture",bookSignature:"Annarita Leva and Laura M. R. Rinaldi",coverURL:"https://cdn.intechopen.com/books/images_new/3568.jpg",publishedDate:"October 17th 2012",numberOfDownloads:256294,editors:[{id:"142145",title:"Dr.",name:"Annarita",middleName:null,surname:"Leva",slug:"annarita-leva",fullName:"Annarita Leva"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"10808",title:"Current Concepts in Dental Implantology",subtitle:"From Science to Clinical Research",isOpenForSubmission:!1,hash:"4af8830e463f89c57515c2da2b9777b0",slug:"current-concepts-in-dental-implantology-from-science-to-clinical-research",bookSignature:"Dragana Gabrić and Marko Vuletić",coverURL:"https://cdn.intechopen.com/books/images_new/10808.jpg",editedByType:"Edited by",publishedDate:"July 27th 2022",editors:[{id:"26946",title:"Prof.",name:"Dragana",middleName:null,surname:"Gabrić",slug:"dragana-gabric",fullName:"Dragana Gabrić"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11328",title:"Botulinum Toxin",subtitle:"Recent Topics and Applications",isOpenForSubmission:!1,hash:"7dd05a316001cef143e209eda51387a7",slug:"botulinum-toxin-recent-topics-and-applications",bookSignature:"Suna Sabuncuoglu",coverURL:"https://cdn.intechopen.com/books/images_new/11328.jpg",editedByType:"Edited by",publishedDate:"July 27th 2022",editors:[{id:"270856",title:"Associate Prof.",name:"Suna",middleName:null,surname:"Sabuncuoglu",slug:"suna-sabuncuoglu",fullName:"Suna Sabuncuoglu"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11085",title:"Polycystic Ovary Syndrome",subtitle:"Functional Investigation and Clinical Application",isOpenForSubmission:!1,hash:"3066dd3ff29e1fac072fd60b08d4d3e7",slug:"polycystic-ovary-syndrome-functional-investigation-and-clinical-application",bookSignature:"Zhengchao Wang",coverURL:"https://cdn.intechopen.com/books/images_new/11085.jpg",editedByType:"Edited by",publishedDate:"July 27th 2022",editors:[{id:"204883",title:"Dr.",name:"Zhengchao",middleName:null,surname:"Wang",slug:"zhengchao-wang",fullName:"Zhengchao Wang"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10833",title:"Tumor Angiogenesis and Modulators",subtitle:null,isOpenForSubmission:!1,hash:"f29b575c46128b2da061ef7f9bd1070b",slug:"tumor-angiogenesis-and-modulators",bookSignature:"Ke Xu",coverURL:"https://cdn.intechopen.com/books/images_new/10833.jpg",editedByType:"Edited by",publishedDate:"July 27th 2022",editors:[{id:"59529",title:"Dr.",name:"Ke",middleName:null,surname:"Xu",slug:"ke-xu",fullName:"Ke Xu"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11356",title:"Molecular Cloning",subtitle:null,isOpenForSubmission:!1,hash:"671c629dd86e97f0fb467b9e70e92296",slug:"molecular-cloning",bookSignature:"Sadık Dincer, Hatice Aysun Mercimek Takcı and Melis Sumengen Ozdenef",coverURL:"https://cdn.intechopen.com/books/images_new/11356.jpg",editedByType:"Edited by",publishedDate:"July 27th 2022",editors:[{id:"188141",title:"Prof.",name:"Sadik",middleName:null,surname:"Dincer",slug:"sadik-dincer",fullName:"Sadik Dincer"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7827",title:"Interpersonal Relationships",subtitle:null,isOpenForSubmission:!1,hash:"ebf41f4d17c75010eb3294cc8cac3d47",slug:"interpersonal-relationships",bookSignature:"Martha Peaslee Levine",coverURL:"https://cdn.intechopen.com/books/images_new/7827.jpg",editedByType:"Edited by",publishedDate:"July 27th 2022",editors:[{id:"186919",title:"Dr.",name:"Martha",middleName:null,surname:"Peaslee Levine",slug:"martha-peaslee-levine",fullName:"Martha Peaslee Levine"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10908",title:"Advances in Decision Making",subtitle:null,isOpenForSubmission:!1,hash:"126486f7f91e18e2e3539a32c38be7b1",slug:"advances-in-decision-making",bookSignature:"Fausto Pedro García Márquez",coverURL:"https://cdn.intechopen.com/books/images_new/10908.jpg",editedByType:"Edited by",publishedDate:"July 27th 2022",editors:[{id:"22844",title:"Prof.",name:"Fausto Pedro",middleName:null,surname:"García Márquez",slug:"fausto-pedro-garcia-marquez",fullName:"Fausto Pedro García Márquez"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10669",title:"Corrosion",subtitle:"Fundamentals and Protection Mechanisms",isOpenForSubmission:!1,hash:"4a76d54f8a40fc2e7002a8d13fd617c1",slug:"corrosion-fundamentals-and-protection-mechanisms",bookSignature:"Fahmina Zafar, Anujit Ghosal and Eram Sharmin",coverURL:"https://cdn.intechopen.com/books/images_new/10669.jpg",editedByType:"Edited by",publishedDate:"July 27th 2022",editors:[{id:"89672",title:"Dr.",name:"Fahmina",middleName:null,surname:"Zafar",slug:"fahmina-zafar",fullName:"Fahmina Zafar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10677",title:"Advanced Topics of Topology",subtitle:null,isOpenForSubmission:!1,hash:"bf964c52f9e653fac20a7fcab58070e5",slug:"advanced-topics-of-topology",bookSignature:"Francisco Bulnes",coverURL:"https://cdn.intechopen.com/books/images_new/10677.jpg",editedByType:"Edited by",publishedDate:"July 27th 2022",editors:[{id:"92918",title:"Dr.",name:"Francisco",middleName:null,surname:"Bulnes",slug:"francisco-bulnes",fullName:"Francisco Bulnes"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11195",title:"Recent Advances in Biometrics",subtitle:null,isOpenForSubmission:!1,hash:"2d32e33e0f499cb5241734bb75dd2a83",slug:"recent-advances-in-biometrics",bookSignature:"Muhammad Sarfraz",coverURL:"https://cdn.intechopen.com/books/images_new/11195.jpg",editedByType:"Edited by",publishedDate:"July 27th 2022",editors:[{id:"215610",title:"Prof.",name:"Muhammad",middleName:null,surname:"Sarfraz",slug:"muhammad-sarfraz",fullName:"Muhammad Sarfraz"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"1268",title:"Industrial Robot",slug:"automation-industrial-robot",parent:{id:"247",title:"Automation",slug:"automation"},numberOfBooks:1,numberOfSeries:0,numberOfAuthorsAndEditors:30,numberOfWosCitations:20,numberOfCrossrefCitations:6,numberOfDimensionsCitations:20,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicId:"1268",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"152",title:"Robot Arms",subtitle:null,isOpenForSubmission:!1,hash:"ad134b214c187871a4740c54c479eccb",slug:"robot-arms",bookSignature:"Satoru Goto",coverURL:"https://cdn.intechopen.com/books/images_new/152.jpg",editedByType:"Edited by",editors:[{id:"6232",title:"Prof.",name:"Satoru",middleName:null,surname:"Goto",slug:"satoru-goto",fullName:"Satoru Goto"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:1,seriesByTopicCollection:[],seriesByTopicTotal:0,mostCitedChapters:[{id:"15861",doi:"10.5772/16257",title:"3D Terrain Sensing System Using Laser Range Finder with Arm-Type Movable Unit",slug:"3d-terrain-sensing-system-using-laser-range-finder-with-arm-type-movable-unit",totalDownloads:3827,totalCrossrefCites:1,totalDimensionsCites:4,abstract:null,book:{id:"152",slug:"robot-arms",title:"Robot Arms",fullTitle:"Robot Arms"},signatures:"Toyomi Fujita and Yuya Kondo",authors:[{id:"24469",title:"Dr.",name:"Toyomi",middleName:null,surname:"Fujita",slug:"toyomi-fujita",fullName:"Toyomi Fujita"},{id:"36556",title:"Mr.",name:"Yuya",middleName:null,surname:"Kondo",slug:"yuya-kondo",fullName:"Yuya Kondo"},{id:"128029",title:"Prof.",name:"Yuya",middleName:null,surname:"Kondo",slug:"yuya-kondo",fullName:"Yuya Kondo"}]},{id:"15864",doi:"10.5772/16383",title:"From Robot Arm to Intentional Agent: the Articulated Head",slug:"from-robot-arm-to-intentional-agent-the-articulated-head",totalDownloads:3616,totalCrossrefCites:1,totalDimensionsCites:4,abstract:null,book:{id:"152",slug:"robot-arms",title:"Robot Arms",fullTitle:"Robot Arms"},signatures:"Christian Kroos, Damith C. Herath and Stelarc",authors:[{id:"24913",title:"Dr.",name:"Christian",middleName:null,surname:"Kroos",slug:"christian-kroos",fullName:"Christian Kroos"},{id:"34698",title:"Dr.",name:"Damith C.",middleName:null,surname:"Herath",slug:"damith-c.-herath",fullName:"Damith C. Herath"},{id:"34699",title:"Mr.",name:null,middleName:null,surname:"Stelarc",slug:"stelarc",fullName:"Stelarc"}]},{id:"15859",doi:"10.5772/16799",title:"Robotic Grasping of Unknown Objects",slug:"robotic-grasping-of-unknown-objects1",totalDownloads:3882,totalCrossrefCites:1,totalDimensionsCites:3,abstract:null,book:{id:"152",slug:"robot-arms",title:"Robot Arms",fullTitle:"Robot Arms"},signatures:"Mario Richtsfeld and Markus Vincze",authors:[{id:"1121",title:"Dr.",name:"Mario",middleName:null,surname:"Richtsfeld",slug:"mario-richtsfeld",fullName:"Mario Richtsfeld"},{id:"65017",title:"Prof.",name:"Markus",middleName:null,surname:"Vincze",slug:"markus-vincze",fullName:"Markus Vincze"}]},{id:"15855",doi:"10.5772/17732",title:"Kinematics of AdeptThree Robot Arm",slug:"kinematics-of-adeptthree-robot-arm",totalDownloads:14670,totalCrossrefCites:1,totalDimensionsCites:2,abstract:null,book:{id:"152",slug:"robot-arms",title:"Robot Arms",fullTitle:"Robot Arms"},signatures:"Adelhard Beni Rehiara",authors:[{id:"29287",title:"Dr.",name:"Adelhard",middleName:"Beni",surname:"Rehiara",slug:"adelhard-rehiara",fullName:"Adelhard Rehiara"}]},{id:"15858",doi:"10.5772/16267",title:"Cartesian Controllers for Tracking of Robot Manipulators under Parametric Uncertainties",slug:"cartesian-controllers-for-tracking-of-robot-manipulators-under-parametric-uncertainties",totalDownloads:3555,totalCrossrefCites:0,totalDimensionsCites:2,abstract:null,book:{id:"152",slug:"robot-arms",title:"Robot Arms",fullTitle:"Robot Arms"},signatures:"R. Garcia-Rodriguez and P. Zegers",authors:[{id:"24519",title:"Dr.",name:"Rodolfo",middleName:null,surname:"Garcia-Rodriguez",slug:"rodolfo-garcia-rodriguez",fullName:"Rodolfo Garcia-Rodriguez"},{id:"35461",title:"Dr.",name:"Pablo",middleName:null,surname:"Zegers",slug:"pablo-zegers",fullName:"Pablo Zegers"}]}],mostDownloadedChaptersLast30Days:[{id:"15855",title:"Kinematics of AdeptThree Robot Arm",slug:"kinematics-of-adeptthree-robot-arm",totalDownloads:14668,totalCrossrefCites:1,totalDimensionsCites:2,abstract:null,book:{id:"152",slug:"robot-arms",title:"Robot Arms",fullTitle:"Robot Arms"},signatures:"Adelhard Beni Rehiara",authors:[{id:"29287",title:"Dr.",name:"Adelhard",middleName:"Beni",surname:"Rehiara",slug:"adelhard-rehiara",fullName:"Adelhard Rehiara"}]},{id:"15862",title:"Design of a Bio-Inspired 3D Orientation Coordinate System and Application in Robotised Tele-Sonography",slug:"design-of-a-bio-inspired-3d-orientation-coordinate-system-and-application-in-robotised-tele-sonograp",totalDownloads:3347,totalCrossrefCites:0,totalDimensionsCites:0,abstract:null,book:{id:"152",slug:"robot-arms",title:"Robot Arms",fullTitle:"Robot Arms"},signatures:"Courreges Fabien",authors:[{id:"24499",title:"Dr.",name:"Fabien",middleName:null,surname:"Courreges",slug:"fabien-courreges",fullName:"Fabien Courreges"}]},{id:"15859",title:"Robotic Grasping of Unknown Objects",slug:"robotic-grasping-of-unknown-objects1",totalDownloads:3881,totalCrossrefCites:1,totalDimensionsCites:3,abstract:null,book:{id:"152",slug:"robot-arms",title:"Robot Arms",fullTitle:"Robot Arms"},signatures:"Mario Richtsfeld and Markus Vincze",authors:[{id:"1121",title:"Dr.",name:"Mario",middleName:null,surname:"Richtsfeld",slug:"mario-richtsfeld",fullName:"Mario Richtsfeld"},{id:"65017",title:"Prof.",name:"Markus",middleName:null,surname:"Vincze",slug:"markus-vincze",fullName:"Markus Vincze"}]},{id:"14974",title:"Distributed Nonlinear Filtering Under Packet Drops and Variable Delays for Robotic Visual Servoing",slug:"distributed-nonlinear-filtering-under-packet-drops-and-variable-delays-for-robotic-visual-servoing",totalDownloads:3183,totalCrossrefCites:0,totalDimensionsCites:1,abstract:null,book:{id:"152",slug:"robot-arms",title:"Robot Arms",fullTitle:"Robot Arms"},signatures:"Gerasimos G. Rigatos",authors:[{id:"5488",title:"Dr.",name:"Gerasimos G.",middleName:null,surname:"Rigatos",slug:"gerasimos-g.-rigatos",fullName:"Gerasimos G. Rigatos"}]},{id:"15860",title:"Object-Handling Tasks Based on Active Tactile and Slippage Sensations",slug:"object-handling-tasks-based-on-active-tactile-and-slippage-sensations",totalDownloads:3327,totalCrossrefCites:1,totalDimensionsCites:1,abstract:null,book:{id:"152",slug:"robot-arms",title:"Robot Arms",fullTitle:"Robot Arms"},signatures:"Masahiro Ohka, Hanafiah Bin Yussof and Sukarnur Che Abdullah",authors:[{id:"26303",title:"Prof.",name:"Masahiro",middleName:null,surname:"Ohka",slug:"masahiro-ohka",fullName:"Masahiro Ohka"},{id:"32065",title:"Dr.",name:"Hanafiah",middleName:null,surname:"Yussof",slug:"hanafiah-yussof",fullName:"Hanafiah Yussof"},{id:"32066",title:"MSc",name:"Sukarnur",middleName:"Che",surname:"Abdullah",slug:"sukarnur-abdullah",fullName:"Sukarnur Abdullah"}]}],onlineFirstChaptersFilter:{topicId:"1268",limit:6,offset:0},onlineFirstChaptersCollection:[],onlineFirstChaptersTotal:0},preDownload:{success:null,errors:{}},subscriptionForm:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[],offset:8,limit:8,total:0},allSeries:{pteSeriesList:[{id:"14",title:"Artificial Intelligence",numberOfPublishedBooks:9,numberOfPublishedChapters:90,numberOfOpenTopics:6,numberOfUpcomingTopics:0,issn:"2633-1403",doi:"10.5772/intechopen.79920",isOpenForSubmission:!0},{id:"7",title:"Biomedical Engineering",numberOfPublishedBooks:12,numberOfPublishedChapters:108,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2631-5343",doi:"10.5772/intechopen.71985",isOpenForSubmission:!0}],lsSeriesList:[{id:"11",title:"Biochemistry",numberOfPublishedBooks:33,numberOfPublishedChapters:330,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2632-0983",doi:"10.5772/intechopen.72877",isOpenForSubmission:!0},{id:"25",title:"Environmental Sciences",numberOfPublishedBooks:1,numberOfPublishedChapters:19,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2754-6713",doi:"10.5772/intechopen.100362",isOpenForSubmission:!0},{id:"10",title:"Physiology",numberOfPublishedBooks:14,numberOfPublishedChapters:145,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2631-8261",doi:"10.5772/intechopen.72796",isOpenForSubmission:!0}],hsSeriesList:[{id:"3",title:"Dentistry",numberOfPublishedBooks:9,numberOfPublishedChapters:140,numberOfOpenTopics:2,numberOfUpcomingTopics:0,issn:"2631-6218",doi:"10.5772/intechopen.71199",isOpenForSubmission:!0},{id:"6",title:"Infectious Diseases",numberOfPublishedBooks:13,numberOfPublishedChapters:123,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2631-6188",doi:"10.5772/intechopen.71852",isOpenForSubmission:!0},{id:"13",title:"Veterinary Medicine and Science",numberOfPublishedBooks:11,numberOfPublishedChapters:112,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2632-0517",doi:"10.5772/intechopen.73681",isOpenForSubmission:!0}],sshSeriesList:[{id:"22",title:"Business, Management and Economics",numberOfPublishedBooks:1,numberOfPublishedChapters:22,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2753-894X",doi:"10.5772/intechopen.100359",isOpenForSubmission:!0},{id:"23",title:"Education and Human Development",numberOfPublishedBooks:0,numberOfPublishedChapters:11,numberOfOpenTopics:1,numberOfUpcomingTopics:1,issn:null,doi:"10.5772/intechopen.100360",isOpenForSubmission:!0},{id:"24",title:"Sustainable Development",numberOfPublishedBooks:1,numberOfPublishedChapters:19,numberOfOpenTopics:5,numberOfUpcomingTopics:0,issn:"2753-6580",doi:"10.5772/intechopen.100361",isOpenForSubmission:!0}],testimonialsList:[{id:"13",text:"The collaboration with and support of the technical staff of IntechOpen is fantastic. The whole process of submitting an article and editing of the submitted article goes extremely smooth and fast, the number of reads and downloads of chapters is high, and the contributions are also frequently cited.",author:{id:"55578",name:"Antonio",surname:"Jurado-Navas",institutionString:null,profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRisIQAS/Profile_Picture_1626166543950",slug:"antonio-jurado-navas",institution:{id:"720",name:"University of Malaga",country:{id:null,name:"Spain"}}}},{id:"6",text:"It is great to work with the IntechOpen to produce a worthwhile collection of research that also becomes a great educational resource and guide for future research endeavors.",author:{id:"259298",name:"Edward",surname:"Narayan",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/259298/images/system/259298.jpeg",slug:"edward-narayan",institution:{id:"3",name:"University of Queensland",country:{id:null,name:"Australia"}}}}]},series:{item:{id:"23",title:"Education and Human Development",doi:"10.5772/intechopen.100360",issn:null,scope:"\r\n\tEducation and Human Development is an interdisciplinary research area that aims to shed light on topics related to both learning and development. This Series is intended for researchers, practitioners, and students who are interested in understanding more about these fields and their applications.
",coverUrl:"https://cdn.intechopen.com/series/covers/23.jpg",latestPublicationDate:"August 12th, 2022",hasOnlineFirst:!0,numberOfPublishedBooks:0,editor:{id:"280770",title:"Dr.",name:"Katherine K.M.",middleName:null,surname:"Stavropoulos",slug:"katherine-k.m.-stavropoulos",fullName:"Katherine K.M. Stavropoulos",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRdFuQAK/Profile_Picture_2022-05-24T09:03:48.jpg",biography:"Katherine Stavropoulos received her BA in Psychology from Trinity College, in Connecticut, USA and her Ph.D. in Experimental Psychology from the University of California, San Diego. She completed her postdoctoral work at the Yale Child Study Center with Dr. James McPartland. Dr. Stavropoulos’ doctoral dissertation explored neural correlates of reward anticipation to social versus nonsocial stimuli in children with and without autism spectrum disorders (ASD). She has been a faculty member at the University of California, Riverside in the School of Education since 2016. Her research focuses on translational studies to explore the reward system in ASD, as well as how anxiety contributes to social challenges in ASD. She also investigates how behavioral interventions affect neural activity, behavior, and school performance in children with ASD. She is also involved in the diagnosis of children with ASD and is a licensed clinical psychologist in California. She is the Assistant Director of the SEARCH Center at UCR and is a faculty member in the Graduate Program in Neuroscience.",institutionString:null,institution:{name:"University of California, Riverside",institutionURL:null,country:{name:"United States of America"}}},editorTwo:null,editorThree:null},subseries:{paginationCount:2,paginationItems:[{id:"89",title:"Education",coverUrl:"https://cdn.intechopen.com/series_topics/covers/89.jpg",isOpenForSubmission:!1,editor:{id:"260066",title:"Associate Prof.",name:"Michail",middleName:null,surname:"Kalogiannakis",slug:"michail-kalogiannakis",fullName:"Michail Kalogiannakis",profilePictureURL:"https://mts.intechopen.com/storage/users/260066/images/system/260066.jpg",biography:"Michail Kalogiannakis is an Associate Professor of the Department of Preschool Education, University of Crete, and an Associate Tutor at School of Humanities at the Hellenic Open University. He graduated from the Physics Department of the University of Crete and continued his post-graduate studies at the University Paris 7-Denis Diderot (D.E.A. in Didactic of Physics), University Paris 5-René Descartes-Sorbonne (D.E.A. in Science Education) and received his Ph.D. degree at the University Paris 5-René Descartes-Sorbonne (PhD in Science Education). His research interests include science education in early childhood, science teaching and learning, e-learning, the use of ICT in science education, games simulations, and mobile learning. He has published over 120 articles in international conferences and journals and has served on the program committees of numerous international conferences.",institutionString:"University of Crete",institution:{name:"University of Crete",institutionURL:null,country:{name:"Greece"}}},editorTwo:{id:"422488",title:"Dr.",name:"Maria",middleName:null,surname:"Ampartzaki",slug:"maria-ampartzaki",fullName:"Maria Ampartzaki",profilePictureURL:"https://mts.intechopen.com/storage/users/422488/images/system/422488.jpg",biography:"Dr Maria Ampartzaki is an Assistant Professor in Early Childhood Education in the Department of Preschool Education at the University of Crete. Her research interests include ICT in education, science education in the early years, inquiry-based and art-based learning, teachers’ professional development, action research, and the Pedagogy of Multiliteracies, among others. She has run and participated in several funded and non-funded projects on the teaching of Science, Social Sciences, and ICT in education. She also has the experience of participating in five Erasmus+ projects.",institutionString:"University of Crete",institution:{name:"University of Crete",institutionURL:null,country:{name:"Greece"}}},editorThree:null},{id:"90",title:"Human Development",coverUrl:"https://cdn.intechopen.com/series_topics/covers/90.jpg",isOpenForSubmission:!0,editor:{id:"191040",title:"Dr.",name:"Tal",middleName:null,surname:"Dotan Ben-Soussan",slug:"tal-dotan-ben-soussan",fullName:"Tal Dotan Ben-Soussan",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bSBf1QAG/Profile_Picture_2022-03-18T07:56:11.jpg",biography:"Tal Dotan Ben-Soussan, Ph.D., is the director of the Research Institute for Neuroscience, Education and Didactics (RINED) – Paoletti Foundation. Ben-Soussan leads international studies on training and neuroplasticity from neurophysiological and psychobiological perspectives. As a neuroscientist and bio-psychologist, she has published numerous articles on neuroplasticity, movement and meditation. She acts as an editor and reviewer in several renowned journals and coordinates international conferences integrating theoretical, methodological and practical approaches on various topics, such as silence, logics and neuro-education. She lives in Assisi, Italy.",institutionString:"Research Institute for Neuroscience, Education and Didactics, Patrizio Paoletti Foundation",institution:null},editorTwo:null,editorThree:null}]},overviewPageOFChapters:{paginationCount:11,paginationItems:[{id:"83053",title:"Apologies in L2 French in Canadian Context",doi:"10.5772/intechopen.106557",signatures:"Bernard Mulo Farenkia",slug:"apologies-in-l2-french-in-canadian-context",totalDownloads:0,totalCrossrefCites:0,totalDimensionsCites:0,authors:[{name:"Bernard",surname:"Mulo Farenkia"}],book:{title:"Second Language Acquisition - Learning Theories and Recent Approaches",coverURL:"https://cdn.intechopen.com/books/images_new/11480.jpg",subseries:{id:"89",title:"Education"}}},{id:"82903",title:"Walking Accessibility to Primary Healthcare Services: An Inequity Factor for Olders in the Lisbon Metropolitan Area (Portugal)",doi:"10.5772/intechopen.106265",signatures:"Eduarda Marques da Costa, Ana Louro, Nuno Marques da Costa, Mariana Dias and Marcela Barata",slug:"walking-accessibility-to-primary-healthcare-services-an-inequity-factor-for-olders-in-the-lisbon-met",totalDownloads:4,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Social Aspects of Ageing - Selected Challenges, Analyses, and Solutions",coverURL:"https://cdn.intechopen.com/books/images_new/11479.jpg",subseries:{id:"90",title:"Human Development"}}},{id:"82622",title:"Contemporary Geographical Gerontology: Reconciling Space and Place in Population Ageing",doi:"10.5772/intechopen.105863",signatures:"Hamish Robertson",slug:"contemporary-geographical-gerontology-reconciling-space-and-place-in-population-ageing",totalDownloads:13,totalCrossrefCites:0,totalDimensionsCites:0,authors:[{name:"Hamish",surname:"Robertson"}],book:{title:"Social Aspects of Ageing - Selected Challenges, Analyses, and Solutions",coverURL:"https://cdn.intechopen.com/books/images_new/11479.jpg",subseries:{id:"90",title:"Human Development"}}},{id:"82610",title:"Perspective Chapter: The Role of Learning Styles in Active Learning",doi:"10.5772/intechopen.105964",signatures:"Armando Lozano-Rodríguez, Fernanda Inez García-Vázquez and José Luis García-Cué",slug:"perspective-chapter-the-role-of-learning-styles-in-active-learning",totalDownloads:11,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Active Learning - Research and Practice",coverURL:"https://cdn.intechopen.com/books/images_new/11481.jpg",subseries:{id:"89",title:"Education"}}}]},overviewPagePublishedBooks:{paginationCount:0,paginationItems:[]},openForSubmissionBooks:{paginationCount:0,paginationItems:[]},onlineFirstChapters:{paginationCount:42,paginationItems:[{id:"82914",title:"Glance on the Critical Role of IL-23 Receptor Gene Variations in Inflammation-Induced Carcinogenesis",doi:"10.5772/intechopen.105049",signatures:"Mohammed El-Gedamy",slug:"glance-on-the-critical-role-of-il-23-receptor-gene-variations-in-inflammation-induced-carcinogenesis",totalDownloads:12,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Chemokines Updates",coverURL:"https://cdn.intechopen.com/books/images_new/11672.jpg",subseries:{id:"18",title:"Proteomics"}}},{id:"82875",title:"Lipidomics as a Tool in the Diagnosis and Clinical Therapy",doi:"10.5772/intechopen.105857",signatures:"María Elizbeth Alvarez Sánchez, Erick Nolasco Ontiveros, Rodrigo Arreola, Adriana Montserrat Espinosa González, Ana María García Bores, Roberto Eduardo López Urrutia, Ignacio Peñalosa Castro, María del Socorro Sánchez Correa and Edgar Antonio Estrella Parra",slug:"lipidomics-as-a-tool-in-the-diagnosis-and-clinical-therapy",totalDownloads:7,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Fatty Acids - Recent Advances",coverURL:"https://cdn.intechopen.com/books/images_new/11669.jpg",subseries:{id:"17",title:"Metabolism"}}},{id:"82440",title:"Lipid Metabolism and Associated Molecular Signaling Events in Autoimmune Disease",doi:"10.5772/intechopen.105746",signatures:"Mohan Vanditha, Sonu Das and Mathew John",slug:"lipid-metabolism-and-associated-molecular-signaling-events-in-autoimmune-disease",totalDownloads:17,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Fatty Acids - Recent Advances",coverURL:"https://cdn.intechopen.com/books/images_new/11669.jpg",subseries:{id:"17",title:"Metabolism"}}},{id:"82483",title:"Oxidative Stress in Cardiovascular Diseases",doi:"10.5772/intechopen.105891",signatures:"Laura Mourino-Alvarez, Tamara Sastre-Oliva, Nerea Corbacho-Alonso and Maria G. Barderas",slug:"oxidative-stress-in-cardiovascular-diseases",totalDownloads:10,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Importance of Oxidative Stress and Antioxidant System in Health and Disease",coverURL:"https://cdn.intechopen.com/books/images_new/11671.jpg",subseries:{id:"15",title:"Chemical Biology"}}},{id:"82751",title:"Mitochondria-Endoplasmic Reticulum Interaction in Central Neurons",doi:"10.5772/intechopen.105738",signatures:"Liliya Kushnireva and Eduard Korkotian",slug:"mitochondria-endoplasmic-reticulum-interaction-in-central-neurons",totalDownloads:6,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Updates on Endoplasmic Reticulum",coverURL:"https://cdn.intechopen.com/books/images_new/11674.jpg",subseries:{id:"14",title:"Cell and Molecular Biology"}}},{id:"82709",title:"Fatty Acid Metabolism as a Tumor Marker",doi:"10.5772/intechopen.106072",signatures:"Gatot Nyarumenteng Adhipurnawan Winarno",slug:"fatty-acid-metabolism-as-a-tumor-marker",totalDownloads:10,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Fatty Acids - Recent Advances",coverURL:"https://cdn.intechopen.com/books/images_new/11669.jpg",subseries:{id:"17",title:"Metabolism"}}},{id:"82716",title:"Advanced glycation end product induced endothelial dysfunction through ER stress: Unravelling the role of Paraoxonase 2",doi:"10.5772/intechopen.106018",signatures:"Ramya Ravi and Bharathidevi Subramaniam Rajesh",slug:"advanced-glycation-end-product-induced-endothelial-dysfunction-through-er-stress-unravelling-the-rol",totalDownloads:13,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Updates on Endoplasmic Reticulum",coverURL:"https://cdn.intechopen.com/books/images_new/11674.jpg",subseries:{id:"14",title:"Cell and Molecular Biology"}}},{id:"82388",title:"Epigenetics: Science of Changes without Change in DNA Sequences",doi:"10.5772/intechopen.105039",signatures:"Jayisha Dhargawe, Rita Lakkakul and Pradip Hirapure",slug:"epigenetics-science-of-changes-without-change-in-dna-sequences",totalDownloads:17,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Modifications of Biomolecules",coverURL:"https://cdn.intechopen.com/books/images_new/11098.jpg",subseries:null}},{id:"82583",title:"Leukaemia: The Purinergic System and Small Extracellular Vesicles",doi:"10.5772/intechopen.104326",signatures:"Arinzechukwu Ude and Kelechi Okeke",slug:"leukaemia-the-purinergic-system-and-small-extracellular-vesicles",totalDownloads:11,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Purinergic System",coverURL:"https://cdn.intechopen.com/books/images_new/10801.jpg",subseries:{id:"17",title:"Metabolism"}}},{id:"82531",title:"Abnormal Iron Metabolism and Its Effect on Dentistry",doi:"10.5772/intechopen.104502",signatures:"Chinmayee Dahihandekar and Sweta Kale Pisulkar",slug:"abnormal-iron-metabolism-and-its-effect-on-dentistry",totalDownloads:12,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Iron Metabolism - A Double-Edged Sword",coverURL:"https://cdn.intechopen.com/books/images_new/10842.jpg",subseries:{id:"17",title:"Metabolism"}}}]},subseriesFiltersForOFChapters:[{caption:"Chemical Biology",value:15,count:2,group:"subseries"},{caption:"Proteomics",value:18,count:2,group:"subseries"},{caption:"Cell and Molecular Biology",value:14,count:17,group:"subseries"},{caption:"Metabolism",value:17,count:18,group:"subseries"}],publishedBooks:{paginationCount:9,paginationItems:[{type:"book",id:"10808",title:"Current Concepts in Dental Implantology",subtitle:"From Science to Clinical Research",coverURL:"https://cdn.intechopen.com/books/images_new/10808.jpg",slug:"current-concepts-in-dental-implantology-from-science-to-clinical-research",publishedDate:"July 27th 2022",editedByType:"Edited by",bookSignature:"Dragana Gabrić and Marko Vuletić",hash:"4af8830e463f89c57515c2da2b9777b0",volumeInSeries:11,fullTitle:"Current Concepts in Dental Implantology - From Science to Clinical Research",editors:[{id:"26946",title:"Prof.",name:"Dragana",middleName:null,surname:"Gabrić",slug:"dragana-gabric",fullName:"Dragana Gabrić",profilePictureURL:"https://mts.intechopen.com/storage/users/26946/images/system/26946.png",institutionString:"University of Zagreb",institution:{name:"University of Zagreb",institutionURL:null,country:{name:"Croatia"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"9493",title:"Periodontology",subtitle:"Fundamentals and Clinical Features",coverURL:"https://cdn.intechopen.com/books/images_new/9493.jpg",slug:"periodontology-fundamentals-and-clinical-features",publishedDate:"February 16th 2022",editedByType:"Edited by",bookSignature:"Petra Surlin",hash:"dfe986c764d6c82ae820c2df5843a866",volumeInSeries:8,fullTitle:"Periodontology - Fundamentals and Clinical Features",editors:[{id:"171921",title:"Prof.",name:"Petra",middleName:null,surname:"Surlin",slug:"petra-surlin",fullName:"Petra Surlin",profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",institutionString:"University of Medicine and Pharmacy of Craiova",institution:{name:"University of Medicine and Pharmacy of Craiova",institutionURL:null,country:{name:"Romania"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"9588",title:"Clinical Concepts and Practical Management Techniques in Dentistry",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/9588.jpg",slug:"clinical-concepts-and-practical-management-techniques-in-dentistry",publishedDate:"February 9th 2022",editedByType:"Edited by",bookSignature:"Aneesa Moolla",hash:"42deab8d3bcf3edf64d1d9028d42efd1",volumeInSeries:7,fullTitle:"Clinical Concepts and Practical Management Techniques in Dentistry",editors:[{id:"318170",title:"Dr.",name:"Aneesa",middleName:null,surname:"Moolla",slug:"aneesa-moolla",fullName:"Aneesa Moolla",profilePictureURL:"https://mts.intechopen.com/storage/users/318170/images/system/318170.png",institutionString:"University of the Witwatersrand",institution:{name:"University of the Witwatersrand",institutionURL:null,country:{name:"South Africa"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"8202",title:"Periodontal Disease",subtitle:"Diagnostic and Adjunctive Non-surgical Considerations",coverURL:"https://cdn.intechopen.com/books/images_new/8202.jpg",slug:"periodontal-disease-diagnostic-and-adjunctive-non-surgical-considerations",publishedDate:"February 5th 2020",editedByType:"Edited by",bookSignature:"Nermin Mohammed Ahmed Yussif",hash:"0aee9799da7db2c732be44dd8fed16d8",volumeInSeries:6,fullTitle:"Periodontal Disease - Diagnostic and Adjunctive Non-surgical Considerations",editors:[{id:"210472",title:"Dr.",name:"Nermin",middleName:"Mohammed Ahmed",surname:"Yussif",slug:"nermin-yussif",fullName:"Nermin Yussif",profilePictureURL:"https://mts.intechopen.com/storage/users/210472/images/system/210472.jpg",institutionString:"MSA University",institution:null}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"8837",title:"Human Teeth",subtitle:"Key Skills and Clinical Illustrations",coverURL:"https://cdn.intechopen.com/books/images_new/8837.jpg",slug:"human-teeth-key-skills-and-clinical-illustrations",publishedDate:"January 22nd 2020",editedByType:"Edited by",bookSignature:"Zühre Akarslan and Farid Bourzgui",hash:"ac055c5801032970123e0a196c2e1d32",volumeInSeries:5,fullTitle:"Human Teeth - Key Skills and Clinical Illustrations",editors:[{id:"171887",title:"Prof.",name:"Zühre",middleName:null,surname:"Akarslan",slug:"zuhre-akarslan",fullName:"Zühre Akarslan",profilePictureURL:"https://mts.intechopen.com/storage/users/171887/images/system/171887.jpg",institutionString:"Gazi University",institution:{name:"Gazi University",institutionURL:null,country:{name:"Turkey"}}}],equalEditorOne:{id:"52177",title:"Prof.",name:"Farid",middleName:null,surname:"Bourzgui",slug:"farid-bourzgui",fullName:"Farid Bourzgui",profilePictureURL:"https://mts.intechopen.com/storage/users/52177/images/system/52177.png",biography:"Prof. Farid Bourzgui obtained his DMD and his DNSO option in Orthodontics at the School of Dental Medicine, Casablanca Hassan II University, Morocco, in 1995 and 2000, respectively. Currently, he is a professor of Orthodontics. He holds a Certificate of Advanced Study type A in Technology of Biomaterials used in Dentistry (1995); Certificate of Advanced Study type B in Dento-Facial Orthopaedics (1997) from the Faculty of Dental Surgery, University Denis Diderot-Paris VII, France; Diploma of Advanced Study (DESA) in Biocompatibility of Biomaterials from the Faculty of Medicine and Pharmacy of Casablanca (2002); Certificate of Clinical Occlusodontics from the Faculty of Dentistry of Casablanca (2004); University Diploma of Biostatistics and Perceptual Health Measurement from the Faculty of Medicine and Pharmacy of Casablanca (2011); and a University Diploma of Pedagogy of Odontological Sciences from the Faculty of Dentistry of Casablanca (2013). He is the author of several scientific articles, book chapters, and books.",institutionString:"University of Hassan II Casablanca",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"7",totalChapterViews:"0",totalEditedBooks:"2",institution:{name:"University of Hassan II Casablanca",institutionURL:null,country:{name:"Morocco"}}},equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"7060",title:"Gingival Disease",subtitle:"A Professional Approach for Treatment and Prevention",coverURL:"https://cdn.intechopen.com/books/images_new/7060.jpg",slug:"gingival-disease-a-professional-approach-for-treatment-and-prevention",publishedDate:"October 23rd 2019",editedByType:"Edited by",bookSignature:"Alaa Eddin Omar Al Ostwani",hash:"b81d39988cba3a3cf746c1616912cf41",volumeInSeries:4,fullTitle:"Gingival Disease - A Professional Approach for Treatment and Prevention",editors:[{id:"240870",title:"Ph.D.",name:"Alaa Eddin Omar",middleName:null,surname:"Al Ostwani",slug:"alaa-eddin-omar-al-ostwani",fullName:"Alaa Eddin Omar Al Ostwani",profilePictureURL:"https://mts.intechopen.com/storage/users/240870/images/system/240870.jpeg",institutionString:"International University for Science and Technology.",institution:{name:"Islamic University of Science and Technology",institutionURL:null,country:{name:"India"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"7572",title:"Trauma in Dentistry",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7572.jpg",slug:"trauma-in-dentistry",publishedDate:"July 3rd 2019",editedByType:"Edited by",bookSignature:"Serdar Gözler",hash:"7cb94732cfb315f8d1e70ebf500eb8a9",volumeInSeries:3,fullTitle:"Trauma in Dentistry",editors:[{id:"204606",title:"Dr.",name:"Serdar",middleName:null,surname:"Gözler",slug:"serdar-gozler",fullName:"Serdar Gözler",profilePictureURL:"https://mts.intechopen.com/storage/users/204606/images/system/204606.jpeg",institutionString:"Istanbul Aydin University",institution:{name:"Istanbul Aydın University",institutionURL:null,country:{name:"Turkey"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"7139",title:"Current Approaches in Orthodontics",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7139.jpg",slug:"current-approaches-in-orthodontics",publishedDate:"April 10th 2019",editedByType:"Edited by",bookSignature:"Belma Işık Aslan and Fatma Deniz Uzuner",hash:"2c77384eeb748cf05a898d65b9dcb48a",volumeInSeries:2,fullTitle:"Current Approaches in Orthodontics",editors:[{id:"42847",title:"Dr.",name:"Belma",middleName:null,surname:"Işik Aslan",slug:"belma-isik-aslan",fullName:"Belma Işik Aslan",profilePictureURL:"https://mts.intechopen.com/storage/users/42847/images/system/42847.jpg",institutionString:"Gazi University Dentistry Faculty Department of Orthodontics",institution:null}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"6668",title:"Dental Caries",subtitle:"Diagnosis, Prevention and Management",coverURL:"https://cdn.intechopen.com/books/images_new/6668.jpg",slug:"dental-caries-diagnosis-prevention-and-management",publishedDate:"September 19th 2018",editedByType:"Edited by",bookSignature:"Zühre Akarslan",hash:"b0f7667770a391f772726c3013c1b9ba",volumeInSeries:1,fullTitle:"Dental Caries - Diagnosis, Prevention and Management",editors:[{id:"171887",title:"Prof.",name:"Zühre",middleName:null,surname:"Akarslan",slug:"zuhre-akarslan",fullName:"Zühre Akarslan",profilePictureURL:"https://mts.intechopen.com/storage/users/171887/images/system/171887.jpg",institutionString:"Gazi University",institution:{name:"Gazi University",institutionURL:null,country:{name:"Turkey"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null}]},subseriesFiltersForPublishedBooks:[{group:"subseries",caption:"Prosthodontics and Implant Dentistry",value:2,count:3},{group:"subseries",caption:"Oral Health",value:1,count:6}],publicationYearFilters:[{group:"publicationYear",caption:"2022",value:2022,count:3},{group:"publicationYear",caption:"2020",value:2020,count:2},{group:"publicationYear",caption:"2019",value:2019,count:3},{group:"publicationYear",caption:"2018",value:2018,count:1}],authors:{paginationCount:35,paginationItems:[{id:"248645",title:"Dr.",name:"Sérgio",middleName:null,surname:"Lousada",slug:"sergio-lousada",fullName:"Sérgio Lousada",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/248645/images/system/248645.jpg",biography:"Sérgio António Neves Lousada has an international Ph.D. in Civil Engineering (Hydraulics). He teaches Hydraulics, Environment, and Water Resources and Construction at the University of Madeira, Portugal. He has published articles and books and participated in events mainly in the areas of hydraulics, urban planning, and land management. Furthermore, he collaborates with the Environmental Resources Analysis Research Group (ARAM), University of Extremadura (UEx); VALORIZA - Research Center for the Enhancement of Endogenous Resources, Polytechnic Institute of Portalegre (IPP), Portugal; CITUR - Madeira - Centre for Tourism Research, Development and Innovation, Madeira, Portugal; and Institute of Research on Territorial Governance and Inter-Organizational Cooperation, Dąbrowa Górnicza, Poland. Moreover, he holds an International master\\'s degree in Ports and Coasts Engineering.",institutionString:"University of Madeira",institution:{name:"University of Madeira",country:{name:"Portugal"}}},{id:"424419",title:"Dr.",name:"Matthew",middleName:"Ayorinde",surname:"Ayorinde Adebayo",slug:"matthew-ayorinde-adebayo",fullName:"Matthew Ayorinde Adebayo",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/424419/images/17356_n.jpg",biography:null,institutionString:null,institution:null},{id:"215342",title:"Prof.",name:"José Manuel",middleName:null,surname:"Naranjo Gómez",slug:"jose-manuel-naranjo-gomez",fullName:"José Manuel Naranjo Gómez",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Extremadura",country:{name:"Spain"}}},{id:"354033",title:"Dr.",name:"Ahmed",middleName:null,surname:"Nasri",slug:"ahmed-nasri",fullName:"Ahmed Nasri",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Carthage",country:{name:"Tunisia"}}},{id:"435702",title:"Dr.",name:"Amel",middleName:null,surname:"Hannachi",slug:"amel-hannachi",fullName:"Amel Hannachi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Carthage",country:{name:"Tunisia"}}},{id:"420857",title:"Prof.",name:"Ezzeddine",middleName:null,surname:"Mahmoudi",slug:"ezzeddine-mahmoudi",fullName:"Ezzeddine Mahmoudi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Carthage",country:{name:"Tunisia"}}},{id:"420856",title:"Prof.",name:"Hamouda",middleName:null,surname:"Beyrem",slug:"hamouda-beyrem",fullName:"Hamouda Beyrem",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Carthage",country:{name:"Tunisia"}}},{id:"435703",title:"Dr.",name:"Hary",middleName:null,surname:"Demey",slug:"hary-demey",fullName:"Hary Demey",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Polytechnic University of Cartagena",country:{name:"Spain"}}},{id:"425026",title:"Mr.",name:"Kholofelo",middleName:null,surname:"Clifford Malematja",slug:"kholofelo-clifford-malematja",fullName:"Kholofelo Clifford Malematja",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Tshwane University of Technology",country:{name:"South Africa"}}},{id:"435701",title:"Dr.",name:"Mohamed",middleName:null,surname:"Allouche",slug:"mohamed-allouche",fullName:"Mohamed Allouche",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Carthage",country:{name:"Tunisia"}}},{id:"420855",title:"Prof.",name:"Patricia",middleName:null,surname:"Aïssa",slug:"patricia-aissa",fullName:"Patricia Aïssa",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Carthage",country:{name:"Tunisia"}}},{id:"435699",title:"Dr.",name:"Takoua",middleName:null,surname:"Mhadhbi",slug:"takoua-mhadhbi",fullName:"Takoua Mhadhbi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Carthage",country:{name:"Tunisia"}}},{id:"442300",title:"Prof.",name:"Véronique",middleName:null,surname:"Perrier",slug:"veronique-perrier",fullName:"Véronique Perrier",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Montpellier",country:{name:"France"}}},{id:"445179",title:"Mr.",name:"Aman",middleName:null,surname:"Jaiswal",slug:"aman-jaiswal",fullName:"Aman Jaiswal",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Indian Institute of Science Education and Research Mohali",country:{name:"India"}}},{id:"445178",title:"Mr.",name:"Dhiraj",middleName:null,surname:"Dutta",slug:"dhiraj-dutta",fullName:"Dhiraj Dutta",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Defence Research Laboratory",country:{name:"India"}}},{id:"445180",title:"Dr.",name:"Rama",middleName:null,surname:"Dubey",slug:"rama-dubey",fullName:"Rama Dubey",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Defence Research Laboratory",country:{name:"India"}}},{id:"424992",title:"Dr.",name:"Mohamed",middleName:null,surname:"Helal",slug:"mohamed-helal",fullName:"Mohamed Helal",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"National Institute of Oceanography and Fisheries",country:{name:"Egypt"}}},{id:"426808",title:"Associate Prof.",name:"Yesim",middleName:null,surname:"Gucbilmez",slug:"yesim-gucbilmez",fullName:"Yesim Gucbilmez",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Eskisehir Technical University",country:{name:"Turkey"}}},{id:"428329",title:"Mr.",name:"Collet",middleName:null,surname:"Maswanganyi",slug:"collet-maswanganyi",fullName:"Collet Maswanganyi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Limpopo",country:{name:"South Africa"}}},{id:"428546",title:"MSc.",name:"Ndivhuwo",middleName:null,surname:"Shumbula",slug:"ndivhuwo-shumbula",fullName:"Ndivhuwo Shumbula",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of the Witwatersrand",country:{name:"South Africa"}}},{id:"352155",title:"Dr.",name:"Poslet",middleName:"Morgan",surname:"Shumbula",slug:"poslet-shumbula",fullName:"Poslet Shumbula",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Limpopo",country:{name:"South Africa"}}},{id:"435064",title:"Dr.",name:"Mohammadtaghi",middleName:null,surname:"Vakili",slug:"mohammadtaghi-vakili",fullName:"Mohammadtaghi Vakili",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Yangtze Normal University",country:{name:"China"}}},{id:"437268",title:"Dr.",name:"Linda Lunga",middleName:null,surname:"Sibali",slug:"linda-lunga-sibali",fullName:"Linda Lunga Sibali",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"437269",title:"Dr.",name:"Peter P.",middleName:null,surname:"Ndibewu",slug:"peter-p.-ndibewu",fullName:"Peter P. Ndibewu",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"424106",title:"Ph.D. Student",name:"Siyabonga",middleName:null,surname:"Aubrey Mhlongo",slug:"siyabonga-aubrey-mhlongo",fullName:"Siyabonga Aubrey Mhlongo",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"424233",title:"Ph.D. Student",name:"Ifeoluwa Oluwafunmilayo",middleName:null,surname:"Daramola",slug:"ifeoluwa-oluwafunmilayo-daramola",fullName:"Ifeoluwa Oluwafunmilayo Daramola",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"446429",title:"Dr.",name:"Dev Vrat",middleName:null,surname:"Kamboj",slug:"dev-vrat-kamboj",fullName:"Dev Vrat Kamboj",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"425585",title:"Dr.",name:"NISHA",middleName:null,surname:"GAUR",slug:"nisha-gaur",fullName:"NISHA GAUR",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"226635",title:"Prof.",name:"Amany",middleName:null,surname:"El-Sikaily",slug:"amany-el-sikaily",fullName:"Amany El-Sikaily",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"435668",title:"Dr.",name:"Sara",middleName:null,surname:"Ghanem",slug:"sara-ghanem",fullName:"Sara Ghanem",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null}]}},subseries:{item:{id:"41",type:"subseries",title:"Water Science",keywords:"Water, Water Resources, Freshwater, Hydrological Processes, Utilization, Protection",scope:"