Mustafa Serdar Genç

By M. Serdar Genç, İlyas Karasu, H. Hakan Açıkel and M. Tuğrul Akpolat

Part of the book: Low Reynolds Number

By Ünver Kaynak, Samet Çaka Çakmakçıoğlu and Mustafa Serdar Genç

Part of the book: Low Reynolds Number

By Mustafa Serdar Genç, Kemal Koca, Hacımurat Demir and Halil Hakan Açıkel

Prevailing utilization of airfoils in the design of micro air vehicles and wind turbines causes to gain attention in terms of determination of flow characterization on these flight vehicles operating at low Reynolds numbers. Thus, these vehicles require flow control techniques to reduce flow phenomena such as boundary layer separation or laminar separation bubble (LSB) affecting aerodynamic performance negatively. This chapter presents a detailed review of traditional passive control techniques for flight vehicle applications operating at low Reynolds numbers. In addition to the traditional methods, a new concept of the pre-stall controller by means of roughness material, flexibility and partial flexibility is highlighted with experimental and numerical results. Results indicate that passive flow control methods can dramatically increase the aerodynamic performance of the aforementioned vehicles by controlling the LSB occurring in the pre-stall region. The control of the LSB with new concept pre-stall control techniques provides lift increment and drag reduction by utilizing significantly less matter consumption and low energy. In particular, new types of these methods presented for the first time by the chapter’s authors have enormously influenced the progress of separation and LSB, resulting in postponing of the stall and enhancing the aerodynamic performance of wind turbine applications.

Part of the book: Autonomous Vehicles