\\n\\n
Dr. Pletser’s experience includes 30 years of working with the European Space Agency as a Senior Physicist/Engineer and coordinating their parabolic flight campaigns, and he is the Guinness World Record holder for the most number of aircraft flown (12) in parabolas, personally logging more than 7,300 parabolas.
\\n\\nSeeing the 5,000th book published makes us at the same time proud, happy, humble, and grateful. This is a great opportunity to stop and celebrate what we have done so far, but is also an opportunity to engage even more, grow, and succeed. It wouldn't be possible to get here without the synergy of team members’ hard work and authors and editors who devote time and their expertise into Open Access book publishing with us.
\\n\\nOver these years, we have gone from pioneering the scientific Open Access book publishing field to being the world’s largest Open Access book publisher. Nonetheless, our vision has remained the same: to meet the challenges of making relevant knowledge available to the worldwide community under the Open Access model.
\\n\\nWe are excited about the present, and we look forward to sharing many more successes in the future.
\\n\\nThank you all for being part of the journey. 5,000 times thank you!
\\n\\nNow with 5,000 titles available Open Access, which one will you read next?
\\n\\nRead, share and download for free: https://www.intechopen.com/books
\\n\\n\\n\\n
\\n"}]',published:!0,mainMedia:null},components:[{type:"htmlEditorComponent",content:'
Preparation of Space Experiments edited by international leading expert Dr. Vladimir Pletser, Director of Space Training Operations at Blue Abyss is the 5,000th Open Access book published by IntechOpen and our milestone publication!
\n\n"This book presents some of the current trends in space microgravity research. The eleven chapters introduce various facets of space research in physical sciences, human physiology and technology developed using the microgravity environment not only to improve our fundamental understanding in these domains but also to adapt this new knowledge for application on earth." says the editor. Listen what else Dr. Pletser has to say...
\n\n\n\nDr. Pletser’s experience includes 30 years of working with the European Space Agency as a Senior Physicist/Engineer and coordinating their parabolic flight campaigns, and he is the Guinness World Record holder for the most number of aircraft flown (12) in parabolas, personally logging more than 7,300 parabolas.
\n\nSeeing the 5,000th book published makes us at the same time proud, happy, humble, and grateful. This is a great opportunity to stop and celebrate what we have done so far, but is also an opportunity to engage even more, grow, and succeed. It wouldn't be possible to get here without the synergy of team members’ hard work and authors and editors who devote time and their expertise into Open Access book publishing with us.
\n\nOver these years, we have gone from pioneering the scientific Open Access book publishing field to being the world’s largest Open Access book publisher. Nonetheless, our vision has remained the same: to meet the challenges of making relevant knowledge available to the worldwide community under the Open Access model.
\n\nWe are excited about the present, and we look forward to sharing many more successes in the future.
\n\nThank you all for being part of the journey. 5,000 times thank you!
\n\nNow with 5,000 titles available Open Access, which one will you read next?
\n\nRead, share and download for free: https://www.intechopen.com/books
\n\n\n\n
\n'}],latestNews:[{slug:"stanford-university-identifies-top-2-scientists-over-1-000-are-intechopen-authors-and-editors-20210122",title:"Stanford University Identifies Top 2% Scientists, Over 1,000 are IntechOpen Authors and Editors"},{slug:"intechopen-authors-included-in-the-highly-cited-researchers-list-for-2020-20210121",title:"IntechOpen Authors Included in the Highly Cited Researchers List for 2020"},{slug:"intechopen-maintains-position-as-the-world-s-largest-oa-book-publisher-20201218",title:"IntechOpen Maintains Position as the World’s Largest OA Book Publisher"},{slug:"all-intechopen-books-available-on-perlego-20201215",title:"All IntechOpen Books Available on Perlego"},{slug:"oiv-awards-recognizes-intechopen-s-editors-20201127",title:"OIV Awards Recognizes IntechOpen's Editors"},{slug:"intechopen-joins-crossref-s-initiative-for-open-abstracts-i4oa-to-boost-the-discovery-of-research-20201005",title:"IntechOpen joins Crossref's Initiative for Open Abstracts (I4OA) to Boost the Discovery of Research"},{slug:"intechopen-hits-milestone-5-000-open-access-books-published-20200908",title:"IntechOpen hits milestone: 5,000 Open Access books published!"},{slug:"intechopen-books-hosted-on-the-mathworks-book-program-20200819",title:"IntechOpen Books Hosted on the MathWorks Book Program"}]},book:{item:{type:"book",id:"217",leadTitle:null,fullTitle:"Recent Trends in Processing and Degradation of Aluminium Alloys",title:"Recent Trends in Processing and Degradation of Aluminium Alloys",subtitle:null,reviewType:"peer-reviewed",abstract:"In the recent decade a quantum leap has been made in production of aluminum alloys and new techniques of casting, forming, welding and surface modification have been evolved to improve the structural integrity of aluminum alloys. \nThis book covers the essential need for the industrial and academic communities for update information. It would also be useful for entrepreneurs technocrats and all those interested in the production and the application of aluminum alloys and strategic structures. It would also help the instructors at senior and graduate level to support their text.",isbn:null,printIsbn:"978-953-307-734-5",pdfIsbn:"978-953-51-6077-9",doi:"10.5772/741",price:159,priceEur:175,priceUsd:205,slug:"recent-trends-in-processing-and-degradation-of-aluminium-alloys",numberOfPages:530,isOpenForSubmission:!1,isInWos:1,hash:"6b334709c43320a6e92eb9c574a8d44d",bookSignature:"Zaki Ahmad",publishedDate:"November 21st 2011",coverURL:"https://cdn.intechopen.com/books/images_new/217.jpg",numberOfDownloads:114699,numberOfWosCitations:106,numberOfCrossrefCitations:32,numberOfDimensionsCitations:109,hasAltmetrics:0,numberOfTotalCitations:247,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"October 20th 2010",dateEndSecondStepPublish:"November 17th 2010",dateEndThirdStepPublish:"March 24th 2011",dateEndFourthStepPublish:"April 23rd 2011",dateEndFifthStepPublish:"June 22nd 2011",currentStepOfPublishingProcess:5,indexedIn:"1,2,3,4,5,6,7",editedByType:"Edited by",kuFlag:!1,editors:[{id:"52898",title:"Prof.",name:"Zaki",middleName:null,surname:"Ahmad",slug:"zaki-ahmad",fullName:"Zaki Ahmad",profilePictureURL:"https://mts.intechopen.com/storage/users/52898/images/1942_n.jpg",biography:"Professor Dr. Zaki Ahmad worked at King Fahd University of Petroleum and Minerals for thirty years in rendered distinguished services in teaching and research. He obtained his PhD from LEEDS University, UK. He was a chartered metallurgical engineer (C.Eng) from engineering council UK. He was a fellow of the institute of Materials, Minerals and Mining(FIMMM). He was a member of the European federation of corrosion and a fellow of institute of Metal Finishing. He substantially contributed to the founding activities in material science, corrosion engineering and nanotechnology at KFUPM and in Iran. He worked on international projects on aluminum with Aluminum, Ranshofen, Austria and Forschungzentrum, Geethscht, Germany and with Metallgesselscheft, Germany. He worked on international projects with Ministry of Technology, Germany. He was a founder contributor of center of excellence in corrosion at KFUPM, Dhahran, Saudi Arabia. He worked on the foundation and development of nanotechnology in Saudi Arabia in 2004. He was the author of “Principles of Corrosion Engineering and Corrosion Control” published by Elsevier in 2006. He has written over 95 research papers and international journals and over forty papers in international research conferences. His research activities included development of Al/SC alloys, Nanostructured superhydrophrobic surfaces, Nanocoatings and self-healing techniques. He was nominated for best researcher award in the Middle East by Energy Exchange in 2011. He was a consultant of several research organizations.",institutionString:null,position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"5",totalChapterViews:"0",totalEditedBooks:"4",institution:{name:"COMSATS University Islamabad",institutionURL:null,country:{name:"Pakistan"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"944",title:"Metallurgy",slug:"metals-and-nonmetals-metallurgy"}],chapters:[{id:"24031",title:"Aluminium Countergravity Casting – Potentials and Challenges",doi:"10.5772/17690",slug:"aluminium-countergravity-casting-potentials-and-challenges",totalDownloads:6625,totalCrossrefCites:1,totalDimensionsCites:2,signatures:"Bolaji Aremo and Mosobalaje O. Adeoye",downloadPdfUrl:"/chapter/pdf-download/24031",previewPdfUrl:"/chapter/pdf-preview/24031",authors:[{id:"29142",title:"Mr.",name:"Bolaji",surname:"Aremo",slug:"bolaji-aremo",fullName:"Bolaji Aremo"},{id:"43844",title:"Dr.",name:"Mosobalaje",surname:"Adeoye",slug:"mosobalaje-adeoye",fullName:"Mosobalaje Adeoye"}],corrections:null},{id:"24032",title:"Intermetallic Phases Examination in Cast AlSi5Cu1Mg and AlCu4Ni2Mg2 Aluminium Alloys in As-Cast and T6 Condition",doi:"10.5772/21453",slug:"intermetallic-phases-examination-in-cast-alsi5cu1mg-and-alcu4ni2mg2-aluminium-alloys-in-as-cast-and-",totalDownloads:3080,totalCrossrefCites:5,totalDimensionsCites:10,signatures:"Grazyna Mrówka-Nowotnik",downloadPdfUrl:"/chapter/pdf-download/24032",previewPdfUrl:"/chapter/pdf-preview/24032",authors:[{id:"43149",title:"Prof.",name:"Grazyna",surname:"Mrowka-Nowotnik",slug:"grazyna-mrowka-nowotnik",fullName:"Grazyna Mrowka-Nowotnik"}],corrections:null},{id:"24033",title:"Rotary-Die Equal Channel Angular Pressing Method",doi:"10.5772/21541",slug:"rotary-die-equal-channel-angular-pressing-method",totalDownloads:2780,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Akira Watazu",downloadPdfUrl:"/chapter/pdf-download/24033",previewPdfUrl:"/chapter/pdf-preview/24033",authors:[{id:"43632",title:"Dr.",name:"Akira",surname:"Watazu",slug:"akira-watazu",fullName:"Akira Watazu"}],corrections:null},{id:"24034",title:"Welding of Aluminum Alloys",doi:"10.5772/18757",slug:"welding-of-aluminum-alloys",totalDownloads:19846,totalCrossrefCites:2,totalDimensionsCites:8,signatures:"R.R. Ambriz and V. Mayagoitia",downloadPdfUrl:"/chapter/pdf-download/24034",previewPdfUrl:"/chapter/pdf-preview/24034",authors:[{id:"32466",title:"Dr.",name:"Ricardo",surname:"Ambriz",slug:"ricardo-ambriz",fullName:"Ricardo Ambriz"},{id:"123451",title:"MSc.",name:"Vicente",surname:"Mayagoitia",slug:"vicente-mayagoitia",fullName:"Vicente Mayagoitia"}],corrections:null},{id:"24035",title:"Prediction of Tensile and Deep Drawing Behaviour of Aluminium Tailor-Welded Blanks",doi:"10.5772/22687",slug:"prediction-of-tensile-and-deep-drawing-behaviour-of-aluminium-tailor-welded-blanks",totalDownloads:4424,totalCrossrefCites:1,totalDimensionsCites:1,signatures:"R. Ganesh Narayanan and G. Saravana Kumar",downloadPdfUrl:"/chapter/pdf-download/24035",previewPdfUrl:"/chapter/pdf-preview/24035",authors:[{id:"7290",title:"Prof.",name:"R Ganesh",surname:"Narayanan",slug:"r-ganesh-narayanan",fullName:"R Ganesh Narayanan"},{id:"48760",title:"Dr.",name:"Saravana Kumar",surname:"Gurunathan",slug:"saravana-kumar-gurunathan",fullName:"Saravana Kumar Gurunathan"}],corrections:null},{id:"24036",title:"Laser Surface Treatments of Aluminum Alloys",doi:"10.5772/18451",slug:"laser-surface-treatments-of-aluminum-alloys",totalDownloads:5906,totalCrossrefCites:1,totalDimensionsCites:5,signatures:"Reza Shoja Razavi and Gholam Reza Gordani",downloadPdfUrl:"/chapter/pdf-download/24036",previewPdfUrl:"/chapter/pdf-preview/24036",authors:[{id:"31536",title:"Prof.",name:"Reza",surname:"Shoja Razavi",slug:"reza-shoja-razavi",fullName:"Reza Shoja Razavi"},{id:"106184",title:"Dr.",name:"Gholam",surname:"Reza Gordani",slug:"gholam-reza-gordani",fullName:"Gholam Reza Gordani"}],corrections:null},{id:"24037",title:"Microstructural Changes of Al-Cu Alloys After Prolonged Annealing at Elevated Temperature",doi:"10.5772/22195",slug:"microstructural-changes-of-al-cu-alloys-after-prolonged-annealing-at-elevated-temperature",totalDownloads:5383,totalCrossrefCites:1,totalDimensionsCites:3,signatures:"Malgorzata Wierzbinska and Jan Sieniawski",downloadPdfUrl:"/chapter/pdf-download/24037",previewPdfUrl:"/chapter/pdf-preview/24037",authors:[{id:"46737",title:"Dr.",name:"Malgorzata",surname:"Wierzbinska",slug:"malgorzata-wierzbinska",fullName:"Malgorzata Wierzbinska"},{id:"109232",title:"Prof.",name:"Jan",surname:"Sieniawski",slug:"jan-sieniawski",fullName:"Jan Sieniawski"}],corrections:null},{id:"24038",title:"PIII for Aluminium Surface Modification",doi:"10.5772/18476",slug:"piii-for-aluminium-surface-modification",totalDownloads:1649,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Régulo López-Callejas, Raúl Valencia-Alvarado, Arturo Eduardo Muñoz-Castro, Rosendo Pena-Eguiluz, Antonio Mercado-Cabrera, Samuel R. Barocio, Benjamín Gonzalo Rodríguez-Méndez and\nAnibal de la Piedad-Beneitez",downloadPdfUrl:"/chapter/pdf-download/24038",previewPdfUrl:"/chapter/pdf-preview/24038",authors:[{id:"31606",title:"Dr.",name:"Regulo",surname:"Lopez-Callejas",slug:"regulo-lopez-callejas",fullName:"Regulo Lopez-Callejas"},{id:"31633",title:"Dr.",name:"Raul",surname:"Valencia-Alvarado",slug:"raul-valencia-alvarado",fullName:"Raul Valencia-Alvarado"},{id:"31634",title:"MSc.",name:"Arturo Eduardo",surname:"Munoz-Castro",slug:"arturo-eduardo-munoz-castro",fullName:"Arturo Eduardo Munoz-Castro"},{id:"31635",title:"Dr.",name:"Antonio",surname:"Mercado-Cabrera",slug:"antonio-mercado-cabrera",fullName:"Antonio Mercado-Cabrera"},{id:"31636",title:"Dr.",name:"Rosendo",surname:"Pena-Eguiluz",slug:"rosendo-pena-eguiluz",fullName:"Rosendo Pena-Eguiluz"},{id:"31637",title:"Dr.",name:"Samuel R.",surname:"Barocio",slug:"samuel-r.-barocio",fullName:"Samuel R. Barocio"},{id:"31638",title:"Dr.",name:"Benjamin Gonzalo",surname:"Rodriguez-Mendez",slug:"benjamin-gonzalo-rodriguez-mendez",fullName:"Benjamin Gonzalo Rodriguez-Mendez"},{id:"31639",title:"MSc.",name:"Anibal",surname:"de la Piedad-Beneitez",slug:"anibal-de-la-piedad-beneitez",fullName:"Anibal de la Piedad-Beneitez"}],corrections:null},{id:"24039",title:"Optimizing the Heat Treatment Process of Cast Aluminium Alloys",doi:"10.5772/21659",slug:"optimizing-the-heat-treatment-process-of-cast-aluminium-alloys",totalDownloads:14196,totalCrossrefCites:7,totalDimensionsCites:15,signatures:"Andrea Manente and Giulio Timelli",downloadPdfUrl:"/chapter/pdf-download/24039",previewPdfUrl:"/chapter/pdf-preview/24039",authors:[{id:"44147",title:"Prof.",name:"Giulio",surname:"Timelli",slug:"giulio-timelli",fullName:"Giulio Timelli"},{id:"45290",title:"Mr.",name:"Andrea",surname:"Manente",slug:"andrea-manente",fullName:"Andrea Manente"}],corrections:null},{id:"24059",title:"High Strength Al-Alloys: Microstructure, Corrosion and Principles of Protection",doi:"10.5772/18766",slug:"high-strength-al-alloys-microstructure-corrosion-and-principles-of-protection",totalDownloads:6428,totalCrossrefCites:5,totalDimensionsCites:43,signatures:"Anthony E. Hughes, Nick Birbilis, Johannes M.C. Mol, Santiago J. Garcia, Xiaorong Zhou and George E. Thompson",downloadPdfUrl:"/chapter/pdf-download/24059",previewPdfUrl:"/chapter/pdf-preview/24059",authors:[{id:"32486",title:"Prof.",name:"Anthony",surname:"Hughes",slug:"anthony-hughes",fullName:"Anthony Hughes"},{id:"43567",title:"Prof.",name:"Nick",surname:"Birbilis",slug:"nick-birbilis",fullName:"Nick Birbilis"},{id:"43568",title:"Prof.",name:"Arjan",surname:"Mol",slug:"arjan-mol",fullName:"Arjan Mol"},{id:"43569",title:"Prof.",name:"Santiago",surname:"Garcia Espallargas",slug:"santiago-garcia-espallargas",fullName:"Santiago Garcia Espallargas"},{id:"43570",title:"Prof.",name:"Xiaorang",surname:"Zhou",slug:"xiaorang-zhou",fullName:"Xiaorang Zhou"},{id:"83528",title:"Prof.",name:"George",surname:"Thompson",slug:"george-thompson",fullName:"George Thompson"}],corrections:null},{id:"24060",title:"Mechanical Behavior and Plastic Instabilities of Compressed Al Metals and Alloys Investigated with Intensive Strain and Acoustic Emission Methods",doi:"10.5772/19694",slug:"mechanical-behavior-and-plastic-instabilities-of-compressed-al-metals-and-alloys-investigated-with-i",totalDownloads:1701,totalCrossrefCites:0,totalDimensionsCites:2,signatures:"Andrzej Pawelek",downloadPdfUrl:"/chapter/pdf-download/24060",previewPdfUrl:"/chapter/pdf-preview/24060",authors:[{id:"35886",title:"Prof.",name:"PaweÅ‚ek",surname:"Andrzej",slug:"paweandaringek-andrzej",fullName:"PaweÅ‚ek Andrzej"}],corrections:null},{id:"24061",title:"Aluminum Alloys for Al/SiC Composites",doi:"10.5772/20121",slug:"aluminum-alloys-for-al-sic-composites",totalDownloads:10138,totalCrossrefCites:5,totalDimensionsCites:11,signatures:"Martin I. Pech-Canul",downloadPdfUrl:"/chapter/pdf-download/24061",previewPdfUrl:"/chapter/pdf-preview/24061",authors:[{id:"37486",title:"Prof.",name:"MARTIN",surname:"PECH-CANUL",slug:"martin-pech-canul",fullName:"MARTIN PECH-CANUL"}],corrections:null},{id:"24062",title:"Effects of Dry Sliding Wear of Wrought Al-Alloys on Mechanical Mixed Layers (MML)",doi:"10.5772/20480",slug:"effects-of-dry-sliding-wear-of-wrought-al-alloys-on-mechanical-mixed-layers-mml-",totalDownloads:2857,totalCrossrefCites:1,totalDimensionsCites:1,signatures:"Mariyam Jameelah Ghazali",downloadPdfUrl:"/chapter/pdf-download/24062",previewPdfUrl:"/chapter/pdf-preview/24062",authors:[{id:"39167",title:"Dr.",name:"Mariyam",surname:"Ghazali",slug:"mariyam-ghazali",fullName:"Mariyam Ghazali"}],corrections:null},{id:"24063",title:"Comparison of Energy-Based and Damage-Related Fatigue Life Models for Aluminium Components Under TMF Loading",doi:"10.5772/22643",slug:"comparison-of-energy-based-and-damage-related-fatigue-life-models-for-aluminium-components-under-tmf",totalDownloads:3578,totalCrossrefCites:1,totalDimensionsCites:2,signatures:"Eichlseder Wilfried, Winter Gerhard, Minichmayr Robert and Riedler Martin",downloadPdfUrl:"/chapter/pdf-download/24063",previewPdfUrl:"/chapter/pdf-preview/24063",authors:[{id:"48539",title:"Prof.",name:"Wilfried",surname:"Eichlseder",slug:"wilfried-eichlseder",fullName:"Wilfried Eichlseder"},{id:"123925",title:"Dr.",name:"Gerhard",surname:"Winter",slug:"gerhard-winter",fullName:"Gerhard Winter"},{id:"123926",title:"Dr.",name:"Martin",surname:"Riedler",slug:"martin-riedler",fullName:"Martin Riedler"},{id:"123928",title:"Dr.",name:"Robert",surname:"Minichmayr",slug:"robert-minichmayr",fullName:"Robert Minichmayr"}],corrections:null},{id:"24064",title:"Deformation Characteristics of Aluminium Composites for Structural Applications",doi:"10.5772/21147",slug:"deformation-characteristics-of-aluminium-composites-for-structural-applications",totalDownloads:4063,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Theodore E. Matikas and Syed T. Hasan",downloadPdfUrl:"/chapter/pdf-download/24064",previewPdfUrl:"/chapter/pdf-preview/24064",authors:[{id:"41974",title:"Prof.",name:"Theodore",surname:"Matikas",slug:"theodore-matikas",fullName:"Theodore Matikas"},{id:"62308",title:"Dr.",name:"Syed",surname:"Hasan",slug:"syed-hasan",fullName:"Syed Hasan"}],corrections:null},{id:"24065",title:"Corrosion Behavior of Aluminium Metal Matrix Composite",doi:"10.5772/23631",slug:"corrosion-behavior-of-aluminium-metal-matrix-composite",totalDownloads:5344,totalCrossrefCites:1,totalDimensionsCites:2,signatures:"Zaki Ahmad, Amir Farzaneh and B. J. Abdul Aleem",downloadPdfUrl:"/chapter/pdf-download/24065",previewPdfUrl:"/chapter/pdf-preview/24065",authors:[{id:"52898",title:"Prof.",name:"Zaki",surname:"Ahmad",slug:"zaki-ahmad",fullName:"Zaki Ahmad"},{id:"52909",title:"Mr.",name:"Abdul Aleem",surname:"B. J.",slug:"abdul-aleem-b.-j.",fullName:"Abdul Aleem B. J."},{id:"52910",title:"Dr.",name:"Amir",surname:"Farzaneh",slug:"amir-farzaneh",fullName:"Amir Farzaneh"}],corrections:null},{id:"24066",title:"Interrelation Between Failure and Damage Accumulation in the Pre-Fracture Zone Under Low-Cycle Loading",doi:"10.5772/17511",slug:"interrelation-between-failure-and-damage-accumulation-in-the-pre-fracture-zone-under-low-cycle-loadi",totalDownloads:1614,totalCrossrefCites:0,totalDimensionsCites:2,signatures:"Vladimir Kornev, Evgeniy Karpov and Alexander Demeshkin",downloadPdfUrl:"/chapter/pdf-download/24066",previewPdfUrl:"/chapter/pdf-preview/24066",authors:[{id:"28546",title:"Prof.",name:"Vladimir",surname:"Kornev",slug:"vladimir-kornev",fullName:"Vladimir Kornev"},{id:"44924",title:"Dr.",name:"Evgeniy",surname:"Karpov",slug:"evgeniy-karpov",fullName:"Evgeniy Karpov"},{id:"45765",title:"Dr.",name:"Alexander",surname:"Demeshkin",slug:"alexander-demeshkin",fullName:"Alexander Demeshkin"}],corrections:null},{id:"24067",title:"Nanostructure, Texture Evolution and Mechanical Properties of Aluminum Alloys Processed by Severe Plastic Deformation",doi:"10.5772/18567",slug:"nanostructure-texture-evolution-and-mechanical-properties-of-aluminum-alloys-processed-by-severe-pla",totalDownloads:3981,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Abbas Akbarzadeh",downloadPdfUrl:"/chapter/pdf-download/24067",previewPdfUrl:"/chapter/pdf-preview/24067",authors:[{id:"31876",title:"Prof.",name:"Abbas",surname:"Akbarzadeh",slug:"abbas-akbarzadeh",fullName:"Abbas Akbarzadeh"}],corrections:null},{id:"24068",title:"Statistical Tests Based on the Geometry of Second Phase Particles",doi:"10.5772/21809",slug:"statistical-tests-based-on-the-geometry-of-second-phase-particles",totalDownloads:1300,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Viktor Beneš, Lev Klebanov, Radka Lechnerová and Peter Sláma",downloadPdfUrl:"/chapter/pdf-download/24068",previewPdfUrl:"/chapter/pdf-preview/24068",authors:[{id:"44930",title:"Prof.",name:"Viktor",surname:"Benes",slug:"viktor-benes",fullName:"Viktor Benes"}],corrections:null},{id:"24069",title:"Microstructural Evolution During the Homogenization of Al-Zn-Mg Aluminum Alloys",doi:"10.5772/34695",slug:"microstructural-evolution-during-the-homogenization-of-al-zn-mg-aluminum-alloys",totalDownloads:9810,totalCrossrefCites:1,totalDimensionsCites:2,signatures:"Ali Reza Eivani, Jie Zhou and Jurek Duszczyk",downloadPdfUrl:"/chapter/pdf-download/24069",previewPdfUrl:"/chapter/pdf-preview/24069",authors:[{id:"18464",title:"Dr.",name:"Ali Reza",surname:"Eivani",slug:"ali-reza-eivani",fullName:"Ali Reza Eivani"}],corrections:null}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},relatedBooks:[{type:"book",id:"3053",title:"Aluminium Alloys",subtitle:"New Trends in Fabrication and Applications",isOpenForSubmission:!1,hash:"2b3d8fcf0bcf5e05087c7fce9c799ecf",slug:"aluminium-alloys-new-trends-in-fabrication-and-applications",bookSignature:"Zaki Ahmad",coverURL:"https://cdn.intechopen.com/books/images_new/3053.jpg",editedByType:"Edited by",editors:[{id:"52898",title:"Prof.",name:"Zaki",surname:"Ahmad",slug:"zaki-ahmad",fullName:"Zaki Ahmad"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"4590",title:"New Trends in Alloy Development, Characterization and Application",subtitle:null,isOpenForSubmission:!1,hash:"699eba8ca34add2a760b11f168e1795a",slug:"new-trends-in-alloy-development-characterization-and-application",bookSignature:"Zaki Ahmad",coverURL:"https://cdn.intechopen.com/books/images_new/4590.jpg",editedByType:"Edited by",editors:[{id:"52898",title:"Prof.",name:"Zaki",surname:"Ahmad",slug:"zaki-ahmad",fullName:"Zaki Ahmad"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5205",title:"High Temperature Corrosion",subtitle:null,isOpenForSubmission:!1,hash:"b04403ba3287b9a301028c82c3e5ddf4",slug:"high-temperature-corrosion",bookSignature:"Zaki Ahmad",coverURL:"https://cdn.intechopen.com/books/images_new/5205.jpg",editedByType:"Edited by",editors:[{id:"52898",title:"Prof.",name:"Zaki",surname:"Ahmad",slug:"zaki-ahmad",fullName:"Zaki Ahmad"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3817",title:"Developments in Corrosion Protection",subtitle:null,isOpenForSubmission:!1,hash:"8ff86fac7ac8bce142fdc3c0e5a79f30",slug:"developments-in-corrosion-protection",bookSignature:"M. Aliofkhazraei",coverURL:"https://cdn.intechopen.com/books/images_new/3817.jpg",editedByType:"Edited by",editors:[{id:"155413",title:"Dr.",name:"Mahmood",surname:"Aliofkhazraei",slug:"mahmood-aliofkhazraei",fullName:"Mahmood Aliofkhazraei"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"27",title:"Magnesium Alloys",subtitle:"Design, Processing and Properties",isOpenForSubmission:!1,hash:null,slug:"magnesium-alloys-design-processing-and-properties",bookSignature:"Frank Czerwinski",coverURL:"https://cdn.intechopen.com/books/images_new/27.jpg",editedByType:"Edited by",editors:[{id:"16295",title:"Dr.",name:"Frank",surname:"Czerwinski",slug:"frank-czerwinski",fullName:"Frank Czerwinski"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3494",title:"Titanium Alloys",subtitle:"Advances in Properties Control",isOpenForSubmission:!1,hash:"83dc0b49b280c4df33cb4cac06fc3660",slug:"titanium-alloys-advances-in-properties-control",bookSignature:"Jan Sieniawski and Waldemar Ziaja",coverURL:"https://cdn.intechopen.com/books/images_new/3494.jpg",editedByType:"Edited by",editors:[{id:"109232",title:"Prof.",name:"Jan",surname:"Sieniawski",slug:"jan-sieniawski",fullName:"Jan Sieniawski"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3844",title:"Light Metal Alloys Applications",subtitle:null,isOpenForSubmission:!1,hash:"6ddeae36c90447289dd3320146d31861",slug:"light-metal-alloys-applications",bookSignature:"Waldemar A. Monteiro",coverURL:"https://cdn.intechopen.com/books/images_new/3844.jpg",editedByType:"Edited by",editors:[{id:"118821",title:"Dr.",name:"Waldemar Alfredo",surname:"Monteiro",slug:"waldemar-alfredo-monteiro",fullName:"Waldemar Alfredo Monteiro"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"920",title:"Magnesium Alloys",subtitle:"Corrosion and Surface Treatments",isOpenForSubmission:!1,hash:"33740111d2545ae64a3b2c3d938fc432",slug:"magnesium-alloys-corrosion-and-surface-treatments",bookSignature:"Frank Czerwinski",coverURL:"https://cdn.intechopen.com/books/images_new/920.jpg",editedByType:"Edited by",editors:[{id:"16295",title:"Dr.",name:"Frank",surname:"Czerwinski",slug:"frank-czerwinski",fullName:"Frank Czerwinski"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"44",title:"Aluminium Alloys",subtitle:"Theory and Applications",isOpenForSubmission:!1,hash:null,slug:"aluminium-alloys-theory-and-applications",bookSignature:"Tibor Kvackaj",coverURL:"https://cdn.intechopen.com/books/images_new/44.jpg",editedByType:"Edited by",editors:[{id:"17752",title:"Prof.",name:"Tibor",surname:"Kvackaj",slug:"tibor-kvackaj",fullName:"Tibor Kvackaj"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1471",title:"Titanium Alloys",subtitle:"Towards Achieving Enhanced Properties for Diversified Applications",isOpenForSubmission:!1,hash:"dcdcf80b9cadfb4e2797127a5cf85700",slug:"titanium-alloys-towards-achieving-enhanced-properties-for-diversified-applications",bookSignature:"A.K.M. Nurul Amin",coverURL:"https://cdn.intechopen.com/books/images_new/1471.jpg",editedByType:"Edited by",editors:[{id:"112624",title:"Dr.",name:"A.K.M. Nurul",surname:"Amin",slug:"a.k.m.-nurul-amin",fullName:"A.K.M. Nurul Amin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],ofsBooks:[]},correction:{item:{id:"68579",slug:"corrigendum-to-industrial-heat-exchanger-operation-and-maintenance-to-minimize-fouling-and-corrosion",title:"Corrigendum to: Industrial Heat Exchanger: Operation and Maintenance to Minimize Fouling and Corrosion",doi:null,correctionPDFUrl:"https://cdn.intechopen.com/pdfs/68579.pdf",downloadPdfUrl:"/chapter/pdf-download/68579",previewPdfUrl:"/chapter/pdf-preview/68579",totalDownloads:null,totalCrossrefCites:null,bibtexUrl:"/chapter/bibtex/68579",risUrl:"/chapter/ris/68579",chapter:{id:"52929",slug:"industrial-heat-exchanger-operation-and-maintenance-to-minimize-fouling-and-corrosion",signatures:"Teng Kah Hou, Salim Newaz Kazi, Abu Bakar Mahat, Chew Bee Teng,\nAhmed Al-Shamma’a and Andy Shaw",dateSubmitted:"March 23rd 2016",dateReviewed:"October 10th 2016",datePrePublished:null,datePublished:"April 26th 2017",book:{id:"6080",title:"Heat Exchangers",subtitle:"Advanced Features and Applications",fullTitle:"Heat Exchangers - Advanced Features and Applications",slug:"heat-exchangers-advanced-features-and-applications",publishedDate:"April 26th 2017",bookSignature:"S M Sohel Murshed and Manuel Matos Lopes",coverURL:"https://cdn.intechopen.com/books/images_new/6080.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"24904",title:"Prof.",name:"S. M. Sohel",middleName:null,surname:"Murshed",slug:"s.-m.-sohel-murshed",fullName:"S. M. Sohel Murshed"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"93483",title:"Dr.",name:"Salim Newaz",middleName:null,surname:"Kazi",fullName:"Salim Newaz Kazi",slug:"salim-newaz-kazi",email:"salimnewaz@um.edu.my",position:null,institution:{name:"University of Malaya",institutionURL:null,country:{name:"Malaysia"}}},{id:"187135",title:"Ph.D.",name:"Kah Hou",middleName:null,surname:"Teng",fullName:"Kah Hou Teng",slug:"kah-hou-teng",email:"alex_teng1989@hotmail.com",position:null,institution:{name:"Liverpool John Moores University",institutionURL:null,country:{name:"United Kingdom"}}},{id:"194347",title:"Prof.",name:"Abu Bakar",middleName:null,surname:"Mahat",fullName:"Abu Bakar Mahat",slug:"abu-bakar-mahat",email:"ir_abakar@um.edu.my",position:null,institution:null},{id:"194348",title:"Dr.",name:"Bee Teng",middleName:null,surname:"Chew",fullName:"Bee Teng Chew",slug:"bee-teng-chew",email:"chewbeeteng@um.edu.my",position:null,institution:null},{id:"194349",title:"Prof.",name:"Ahmed",middleName:null,surname:"Al-Shamma'A",fullName:"Ahmed Al-Shamma'A",slug:"ahmed-al-shamma'a",email:"A.Al-Shamma'a@ljmu.ac.uk",position:null,institution:null},{id:"194350",title:"Prof.",name:"Andy",middleName:null,surname:"Shaw",fullName:"Andy Shaw",slug:"andy-shaw",email:"A.Shaw@ljmu.ac.uk",position:null,institution:null}]}},chapter:{id:"52929",slug:"industrial-heat-exchanger-operation-and-maintenance-to-minimize-fouling-and-corrosion",signatures:"Teng Kah Hou, Salim Newaz Kazi, Abu Bakar Mahat, Chew Bee Teng,\nAhmed Al-Shamma’a and Andy Shaw",dateSubmitted:"March 23rd 2016",dateReviewed:"October 10th 2016",datePrePublished:null,datePublished:"April 26th 2017",book:{id:"6080",title:"Heat Exchangers",subtitle:"Advanced Features and Applications",fullTitle:"Heat Exchangers - Advanced Features and Applications",slug:"heat-exchangers-advanced-features-and-applications",publishedDate:"April 26th 2017",bookSignature:"S M Sohel Murshed and Manuel Matos Lopes",coverURL:"https://cdn.intechopen.com/books/images_new/6080.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"24904",title:"Prof.",name:"S. M. Sohel",middleName:null,surname:"Murshed",slug:"s.-m.-sohel-murshed",fullName:"S. M. Sohel Murshed"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"93483",title:"Dr.",name:"Salim Newaz",middleName:null,surname:"Kazi",fullName:"Salim Newaz Kazi",slug:"salim-newaz-kazi",email:"salimnewaz@um.edu.my",position:null,institution:{name:"University of Malaya",institutionURL:null,country:{name:"Malaysia"}}},{id:"187135",title:"Ph.D.",name:"Kah Hou",middleName:null,surname:"Teng",fullName:"Kah Hou Teng",slug:"kah-hou-teng",email:"alex_teng1989@hotmail.com",position:null,institution:{name:"Liverpool John Moores University",institutionURL:null,country:{name:"United Kingdom"}}},{id:"194347",title:"Prof.",name:"Abu Bakar",middleName:null,surname:"Mahat",fullName:"Abu Bakar Mahat",slug:"abu-bakar-mahat",email:"ir_abakar@um.edu.my",position:null,institution:null},{id:"194348",title:"Dr.",name:"Bee Teng",middleName:null,surname:"Chew",fullName:"Bee Teng Chew",slug:"bee-teng-chew",email:"chewbeeteng@um.edu.my",position:null,institution:null},{id:"194349",title:"Prof.",name:"Ahmed",middleName:null,surname:"Al-Shamma'A",fullName:"Ahmed Al-Shamma'A",slug:"ahmed-al-shamma'a",email:"A.Al-Shamma'a@ljmu.ac.uk",position:null,institution:null},{id:"194350",title:"Prof.",name:"Andy",middleName:null,surname:"Shaw",fullName:"Andy Shaw",slug:"andy-shaw",email:"A.Shaw@ljmu.ac.uk",position:null,institution:null}]},book:{id:"6080",title:"Heat Exchangers",subtitle:"Advanced Features and Applications",fullTitle:"Heat Exchangers - Advanced Features and Applications",slug:"heat-exchangers-advanced-features-and-applications",publishedDate:"April 26th 2017",bookSignature:"S M Sohel Murshed and Manuel Matos Lopes",coverURL:"https://cdn.intechopen.com/books/images_new/6080.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"24904",title:"Prof.",name:"S. M. Sohel",middleName:null,surname:"Murshed",slug:"s.-m.-sohel-murshed",fullName:"S. M. Sohel Murshed"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}}},ofsBook:{item:{type:"book",id:"8640",leadTitle:null,title:"Cancer Chemoresistance",subtitle:null,reviewType:"peer-reviewed",abstract:"
\r\n\tNeoplasia is considered to be the result of aberrations in the homeostatic mechanisms regulating cell turnover. This may be due to a combination of genetic, epigenetic and stochastic factors. Drug resistance is one of the major reasons for treatment failure and tumor relapse. Hence, an improved understanding of the mechanisms of neoplastic growth is possible based on systematic cataloging of the druggable targets for each of the major hallmarks of cancer. This approach can also aid in the refinement and validation of the in vitro and in vivo models, as well as provide pointers for the development of novel systems. Genomic instability and mutation, as well as tumor-promoting inflammation should be included as underlying factors influencing the process of neoplasia along with factors dysregulating energetics. The focus of this book is to update the reader on an integrated perspective including epigenetics data and corroborative mechanistic evidence from multiple model systems including humans. This will enable the reader to better comprehend the current scenario in terms of the pharmacological aspects pertaining to cancer chemoresistance. Also, the challenges for the molecular oncology will be discussed as well as probable strategies and a road-map for cancer chemotherapeutic drug development.
",isbn:null,printIsbn:null,pdfIsbn:null,doi:null,price:0,priceEur:null,priceUsd:null,slug:null,numberOfPages:0,isOpenForSubmission:!1,hash:"2a80fe34c552bb6ca76ef9cd8f21e377",bookSignature:"Dr. Suresh P.K.",publishedDate:null,coverURL:"https://cdn.intechopen.com/books/images_new/8640.jpg",keywords:"Molecular Mechanisms of Aberrations, Proliferation Mechanisms, Types of Cell Death, Signal Transduction Pathways, Angiogenesis in Cancer, Angiogenesis in Wound Healing, Molecular Mechanisms of Invasion, Molecular Mechanisms of Metastasis, Telomeres, Stem Cells, Delivery Challenges, Evasion Mechanisms",numberOfDownloads:null,numberOfWosCitations:0,numberOfCrossrefCitations:0,numberOfDimensionsCitations:null,numberOfTotalCitations:null,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"November 5th 2018",dateEndSecondStepPublish:"November 26th 2018",dateEndThirdStepPublish:"January 25th 2019",dateEndFourthStepPublish:"April 15th 2019",dateEndFifthStepPublish:"June 14th 2019",remainingDaysToSecondStep:"2 years",secondStepPassed:!0,currentStepOfPublishingProcess:5,editedByType:null,kuFlag:!1,biosketch:null,coeditorOneBiosketch:null,coeditorTwoBiosketch:null,coeditorThreeBiosketch:null,coeditorFourBiosketch:null,coeditorFiveBiosketch:null,editors:[{id:"190244",title:"Dr.",name:"Suresh",middleName:null,surname:"P.K.",slug:"suresh-p.k.",fullName:"Suresh P.K.",profilePictureURL:"https://mts.intechopen.com/storage/users/190244/images/system/190244.jpeg",biography:"P.K. Suresh is a Professor at the School of Biosciences & Technology, VIT, Vellore (2009 to date). He has approximately 18.5 years of teaching, research and administrative experience in Biotechnology & Industrial Biotechnology and allied disciplines. He had also headed Biotechnology & Industrial Biotechnology departments and has handled a wide variety of theory papers. He has 45 research publications in SCOPUS-indexed journals and has completed 3 funded projects as the Principal Investigator. He has made several presentations at International conferences. He has guided 5 doctoral students (2 as co-guide) and is currently guiding 5 students in the doctoral program. He has organized and participated actively in several Faculty Development Programs in areas as diverse as Stem Cells, Bio-inspired Design and Pharmacokinetics and was also a resource person in these events.",institutionString:"School of Biosciences & Technology",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"0",totalChapterViews:"0",totalEditedBooks:"0",institution:{name:"Vellore Institute of Technology University",institutionURL:null,country:{name:"India"}}}],coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"6",title:"Biochemistry, Genetics and Molecular Biology",slug:"biochemistry-genetics-and-molecular-biology"}],chapters:null,productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},personalPublishingAssistant:{id:"177731",firstName:"Dajana",lastName:"Pemac",middleName:null,title:"Ms.",imageUrl:"https://mts.intechopen.com/storage/users/177731/images/4726_n.jpg",email:"dajana@intechopen.com",biography:"As a Commissioning Editor at IntechOpen, I work closely with our collaborators in the selection of book topics for the yearly publishing plan and in preparing new book catalogues for each season. This requires extensive analysis of developing trends in scientific research in order to offer our readers relevant content. Creating the book catalogue is also based on keeping track of the most read, downloaded and highly cited chapters and books and relaunching similar topics. I am also responsible for consulting with our Scientific Advisors on which book topics to add to our catalogue and sending possible book proposal topics to them for evaluation. Once the catalogue is complete, I contact leading researchers in their respective fields and ask them to become possible Academic Editors for each book project. Once an editor is appointed, I prepare all necessary information required for them to begin their work, as well as guide them through the editorship process. I also assist editors in inviting suitable authors to contribute to a specific book project and each year, I identify and invite exceptional editors to join IntechOpen as Scientific Advisors. I am responsible for developing and maintaining strong relationships with all collaborators to ensure an effective and efficient publishing process and support other departments in developing and maintaining such relationships."}},relatedBooks:[{type:"book",id:"6694",title:"New Trends in Ion Exchange Studies",subtitle:null,isOpenForSubmission:!1,hash:"3de8c8b090fd8faa7c11ec5b387c486a",slug:"new-trends-in-ion-exchange-studies",bookSignature:"Selcan Karakuş",coverURL:"https://cdn.intechopen.com/books/images_new/6694.jpg",editedByType:"Edited by",editors:[{id:"206110",title:"Dr.",name:"Selcan",surname:"Karakuş",slug:"selcan-karakus",fullName:"Selcan Karakuş"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophanides",surname:"Theophile",slug:"theophanides-theophile",fullName:"Theophanides Theophile"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3092",title:"Anopheles mosquitoes",subtitle:"New insights into malaria vectors",isOpenForSubmission:!1,hash:"c9e622485316d5e296288bf24d2b0d64",slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",bookSignature:"Sylvie Manguin",coverURL:"https://cdn.intechopen.com/books/images_new/3092.jpg",editedByType:"Edited by",editors:[{id:"50017",title:"Prof.",name:"Sylvie",surname:"Manguin",slug:"sylvie-manguin",fullName:"Sylvie Manguin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"371",title:"Abiotic Stress in Plants",subtitle:"Mechanisms and Adaptations",isOpenForSubmission:!1,hash:"588466f487e307619849d72389178a74",slug:"abiotic-stress-in-plants-mechanisms-and-adaptations",bookSignature:"Arun Shanker and B. Venkateswarlu",coverURL:"https://cdn.intechopen.com/books/images_new/371.jpg",editedByType:"Edited by",editors:[{id:"58592",title:"Dr.",name:"Arun",surname:"Shanker",slug:"arun-shanker",fullName:"Arun Shanker"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"314",title:"Regenerative Medicine and Tissue Engineering",subtitle:"Cells and Biomaterials",isOpenForSubmission:!1,hash:"bb67e80e480c86bb8315458012d65686",slug:"regenerative-medicine-and-tissue-engineering-cells-and-biomaterials",bookSignature:"Daniel Eberli",coverURL:"https://cdn.intechopen.com/books/images_new/314.jpg",editedByType:"Edited by",editors:[{id:"6495",title:"Dr.",name:"Daniel",surname:"Eberli",slug:"daniel-eberli",fullName:"Daniel Eberli"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"57",title:"Physics and Applications of Graphene",subtitle:"Experiments",isOpenForSubmission:!1,hash:"0e6622a71cf4f02f45bfdd5691e1189a",slug:"physics-and-applications-of-graphene-experiments",bookSignature:"Sergey Mikhailov",coverURL:"https://cdn.intechopen.com/books/images_new/57.jpg",editedByType:"Edited by",editors:[{id:"16042",title:"Dr.",name:"Sergey",surname:"Mikhailov",slug:"sergey-mikhailov",fullName:"Sergey Mikhailov"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"2270",title:"Fourier Transform",subtitle:"Materials Analysis",isOpenForSubmission:!1,hash:"5e094b066da527193e878e160b4772af",slug:"fourier-transform-materials-analysis",bookSignature:"Salih Mohammed Salih",coverURL:"https://cdn.intechopen.com/books/images_new/2270.jpg",editedByType:"Edited by",editors:[{id:"111691",title:"Dr.Ing.",name:"Salih",surname:"Salih",slug:"salih-salih",fullName:"Salih Salih"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},chapter:{item:{type:"chapter",id:"23116",title:"Soil Loss-Rainfall Duration Relations as Affected by Peat Content, Soil Type and Compaction Effort",doi:"10.5772/24478",slug:"soil-loss-rainfall-duration-relations-as-affected-by-peat-content-soil-type-and-compaction-effort",body:null,keywords:null,chapterPDFUrl:"https://cdn.intechopen.com/pdfs/23116.pdf",chapterXML:null,downloadPdfUrl:"/chapter/pdf-download/23116",previewPdfUrl:"/chapter/pdf-preview/23116",totalDownloads:2185,totalViews:102,totalCrossrefCites:1,totalDimensionsCites:2,hasAltmetrics:0,dateSubmitted:"December 7th 2010",dateReviewed:"January 17th 2011",datePrePublished:null,datePublished:"November 21st 2011",dateFinished:null,readingETA:"0",abstract:null,reviewType:"peer-reviewed",bibtexUrl:"/chapter/bibtex/23116",risUrl:"/chapter/ris/23116",book:{slug:"soil-erosion-studies"},signatures:"E.I. Ekwue and S.D. Ramoutar",authors:[{id:"57641",title:"Prof.",name:"Edwin",middleName:null,surname:"Ekwue",fullName:"Edwin Ekwue",slug:"edwin-ekwue",email:"edwin.ekwue@sta.uwi.edu",position:null,institution:null},{id:"57646",title:"Mr.",name:"Shivanand",middleName:null,surname:"Ramoutar",fullName:"Shivanand Ramoutar",slug:"shivanand-ramoutar",email:"shivanand.Ramoutar@sta.uwi.edu",position:null,institution:null}],sections:null,chapterReferences:null,footnotes:null,contributors:null,corrections:null},book:{id:"1354",title:"Soil Erosion",subtitle:"Studies",fullTitle:"Soil Erosion Studies",slug:"soil-erosion-studies",publishedDate:"November 21st 2011",bookSignature:"Danilo Godone and Silvia Stanchi",coverURL:"https://cdn.intechopen.com/books/images_new/1354.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"313983",title:"Dr.",name:"Danilo",middleName:null,surname:"Godone",slug:"danilo-godone",fullName:"Danilo Godone"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"23108",title:"Natural Potential for Erosion for Brazilian Territory",slug:"natural-potential-for-erosion-for-brazilian-territory",totalDownloads:3317,totalCrossrefCites:1,signatures:"Alexandre Marco da Silva, Clayton Alcarde Alvares and Claudia Hitomi Watanabe",authors:[{id:"50872",title:"Dr.",name:"Alexandre Marco",middleName:null,surname:"Da Silva",fullName:"Alexandre Marco Da Silva",slug:"alexandre-marco-da-silva"},{id:"52326",title:"MSc.",name:"Clayton",middleName:null,surname:"Alcarde Alvares",fullName:"Clayton Alcarde Alvares",slug:"clayton-alcarde-alvares"},{id:"52332",title:"Ms.",name:"Claudia",middleName:"Hitomi",surname:"Watanabe",fullName:"Claudia Watanabe",slug:"claudia-watanabe"}]},{id:"23109",title:"Soil Erosion Processes in Semiarid Areas: The Importance of Native Vegetation",slug:"soil-erosion-processes-in-semiarid-areas-the-importance-of-native-vegetation",totalDownloads:4273,totalCrossrefCites:2,signatures:"Rebeca Vásquez-Méndez, Eusebio Ventura-Ramos, Klavdia Oleschko, Luis Hernández-Sandoval and Miguel Angel Domínguez-Cortázar",authors:[{id:"51105",title:"Prof.",name:"Rebeca",middleName:null,surname:"Vasquez-Mendez",fullName:"Rebeca Vasquez-Mendez",slug:"rebeca-vasquez-mendez"},{id:"51117",title:"Dr.",name:"Eusebio",middleName:null,surname:"Ventura",fullName:"Eusebio Ventura",slug:"eusebio-ventura"},{id:"51118",title:"Dr.",name:"Luis G",middleName:null,surname:"Hernandez-Sandoval",fullName:"Luis G Hernandez-Sandoval",slug:"luis-g-hernandez-sandoval"},{id:"51119",title:"Prof.",name:"Klavdia",middleName:null,surname:"Oleschko",fullName:"Klavdia Oleschko",slug:"klavdia-oleschko"},{id:"51120",title:"Dr.",name:"Migue A",middleName:null,surname:"Dominguez-Cortazar",fullName:"Migue A Dominguez-Cortazar",slug:"migue-a-dominguez-cortazar"}]},{id:"23110",title:"Deforestation / Reforestation in Mediterranean Europe: The Case of Greece",slug:"deforestation-reforestation-in-mediterranean-europe-the-case-of-greece",totalDownloads:2903,totalCrossrefCites:3,signatures:"Olga G. Christopoulou",authors:[{id:"52144",title:"Prof.",name:"Olga",middleName:null,surname:"Christopoulou",fullName:"Olga Christopoulou",slug:"olga-christopoulou"}]},{id:"23111",title:"Soil Erosion Under Different Land Use and Cover Types in a Marginal Area of Portugal",slug:"soil-erosion-under-different-land-use-and-cover-types-in-a-marginal-area-of-portugal",totalDownloads:3396,totalCrossrefCites:0,signatures:"Adélia Nobre Nunes",authors:[{id:"55644",title:"Prof.",name:"Adélia",middleName:null,surname:"Nunes",fullName:"Adélia Nunes",slug:"adelia-nunes"}]},{id:"23112",title:"Soil Erosion and Conservation Measures in Semiarid Ecosystems Affected by Wildfires",slug:"soil-erosion-and-conservation-measures-in-semiarid-ecosystems-affected-by-wildfires",totalDownloads:2480,totalCrossrefCites:4,signatures:"David Badía, Clara Martí and Raquel Charte",authors:[{id:"59686",title:"Prof.",name:"David",middleName:null,surname:"Badía",fullName:"David Badía",slug:"david-badia"},{id:"110456",title:"Prof.",name:"Clara",middleName:null,surname:"Martí",fullName:"Clara Martí",slug:"clara-marti"},{id:"110457",title:"Ms.",name:"Raquel",middleName:null,surname:"Charte",fullName:"Raquel Charte",slug:"raquel-charte"}]},{id:"23113",title:"Investigation of Effective Factors on Runoff Generation and Sediment Yield of Loess Deposits Using Rainfall Simulator",slug:"investigation-of-effective-factors-on-runoff-generation-and-sediment-yield-of-loess-deposits-using-r",totalDownloads:1986,totalCrossrefCites:0,signatures:"S. Feiznia , M. Nohtani, H. Ahmadi and H. Peyrowan",authors:[{id:"52204",title:"Dr.",name:"Sadat",middleName:null,surname:"Feiznia",fullName:"Sadat Feiznia",slug:"sadat-feiznia"},{id:"63054",title:"Prof.",name:"Mohammad",middleName:null,surname:"Nohtani",fullName:"Mohammad Nohtani",slug:"mohammad-nohtani"},{id:"63055",title:"Mr.",name:"Hasan",middleName:null,surname:"Ahmadi",fullName:"Hasan Ahmadi",slug:"hasan-ahmadi"},{id:"63056",title:"Mr.",name:"Hamid Reza",middleName:null,surname:"Peyrovan",fullName:"Hamid Reza Peyrovan",slug:"hamid-reza-peyrovan"}]},{id:"23114",title:"Plot-Scale Experimental Studies",slug:"plot-scale-experimental-studies",totalDownloads:2180,totalCrossrefCites:0,signatures:"Lúcio Flávio Ferreira Moreira, Flaviane de Oliveira Silva, Serena Chen, Herbert Tadeu de Almeida Andrade, José Hilário Tavares da Silva and Antonio Marozzi Righetto",authors:[{id:"53164",title:"Dr.",name:"Lucio Flavio",middleName:"Ferreira",surname:"Moreira",fullName:"Lucio Flavio Moreira",slug:"lucio-flavio-moreira"},{id:"62055",title:"Prof.",name:"Antonio",middleName:null,surname:"Marozzi Righetto",fullName:"Antonio Marozzi Righetto",slug:"antonio-marozzi-righetto"},{id:"62193",title:"Dr.",name:"Serena",middleName:null,surname:"Chen",fullName:"Serena Chen",slug:"serena-chen"},{id:"98093",title:"MSc.",name:"Flaviane",middleName:null,surname:"Silva",fullName:"Flaviane Silva",slug:"flaviane-silva"},{id:"98094",title:"Dr.",name:"Herbet",middleName:null,surname:"Andrade",fullName:"Herbet Andrade",slug:"herbet-andrade"},{id:"98100",title:"BSc.",name:"José Hilário",middleName:null,surname:"Silva",fullName:"José Hilário Silva",slug:"jose-hilario-silva"}]},{id:"23115",title:"Impact of Rainfall Microstructure on Erosivity and Splash Soil Erosion Under Simulated Rainfall",slug:"impact-of-rainfall-microstructure-on-erosivity-and-splash-soil-erosion-under-simulated-rainfall",totalDownloads:3692,totalCrossrefCites:1,signatures:"Mohamed A. M. Abd Elbasit, Hiroshi Yasuda, Atte Salmi and Zahoor Ahmad",authors:[{id:"55384",title:"Dr.",name:"Mohamed A. M.",middleName:null,surname:"Abd Elbasit",fullName:"Mohamed A. M. Abd Elbasit",slug:"mohamed-a.-m.-abd-elbasit"},{id:"61907",title:"Dr.",name:"Hiroshi",middleName:null,surname:"Yasuda",fullName:"Hiroshi Yasuda",slug:"hiroshi-yasuda"},{id:"61908",title:"Mr.",name:"Atte",middleName:null,surname:"Salmi",fullName:"Atte Salmi",slug:"atte-salmi"},{id:"61909",title:"Dr.",name:"Zahoor",middleName:null,surname:"Ahmed",fullName:"Zahoor Ahmed",slug:"zahoor-ahmed"}]},{id:"23116",title:"Soil Loss-Rainfall Duration Relations as Affected by Peat Content, Soil Type and Compaction Effort",slug:"soil-loss-rainfall-duration-relations-as-affected-by-peat-content-soil-type-and-compaction-effort",totalDownloads:2185,totalCrossrefCites:1,signatures:"E.I. Ekwue and S.D. Ramoutar",authors:[{id:"57641",title:"Prof.",name:"Edwin",middleName:null,surname:"Ekwue",fullName:"Edwin Ekwue",slug:"edwin-ekwue"},{id:"57646",title:"Mr.",name:"Shivanand",middleName:null,surname:"Ramoutar",fullName:"Shivanand Ramoutar",slug:"shivanand-ramoutar"}]},{id:"23117",title:"Soil Erosion and Surface Runoff on Slopes in Mountain Environment Depending on Application Technique and Seed Mixture – A Case-Study",slug:"soil-erosion-and-surface-runoff-on-slopes-in-mountain-environment-depending-on-application-technique",totalDownloads:3308,totalCrossrefCites:1,signatures:"Wilhelm Graiss and Bernhard Krautzer",authors:[{id:"62005",title:"Dr.",name:"Wilhelm",middleName:null,surname:"Graiss",fullName:"Wilhelm Graiss",slug:"wilhelm-graiss"},{id:"62006",title:"Dr.",name:"Bernhard",middleName:null,surname:"Krautzer",fullName:"Bernhard Krautzer",slug:"bernhard-krautzer"}]},{id:"23118",title:"Combined Hydroseeding and Coconet Reinforcement for Soil Erosion Control",slug:"combined-hydroseeding-and-coconet-reinforcement-for-soil-erosion-control",totalDownloads:6454,totalCrossrefCites:0,signatures:"Mervin M. Cereno, Fibor J. Tan and Francis Aldrine A. Uy",authors:[{id:"53999",title:"Prof.",name:"Mervin",middleName:null,surname:"Cereno",fullName:"Mervin Cereno",slug:"mervin-cereno"},{id:"63052",title:"Prof.",name:"Fibor",middleName:"J.",surname:"Tan",fullName:"Fibor Tan",slug:"fibor-tan"},{id:"99596",title:"Prof.",name:"Francis Aldrine",middleName:null,surname:"Uy",fullName:"Francis Aldrine Uy",slug:"francis-aldrine-uy"}]},{id:"23119",title:"SCALES: An Original Model to Diagnose Soil Erosion Hazard and Assess the Impact of Climate Change on Its Evolution",slug:"scales-an-original-model-to-diagnose-soil-erosion-hazard-and-assess-the-impact-of-climate-change-on-",totalDownloads:2355,totalCrossrefCites:0,signatures:"Le Gouée Patrick, Cantat Olivier, Bensaid Abdelkrim and Goulet Alexis",authors:[{id:"52252",title:"Dr.",name:"Patrick",middleName:null,surname:"Le Gouée",fullName:"Patrick Le Gouée",slug:"patrick-le-gouee"},{id:"60657",title:"Dr.",name:"Olivier",middleName:null,surname:"Cantat",fullName:"Olivier Cantat",slug:"olivier-cantat"},{id:"60658",title:"Mr.",name:"Abdelkrim",middleName:null,surname:"Bensaid",fullName:"Abdelkrim Bensaid",slug:"abdelkrim-bensaid"},{id:"60659",title:"Mr.",name:"Alexis",middleName:null,surname:"Goulet",fullName:"Alexis Goulet",slug:"alexis-goulet"}]},{id:"23120",title:"SATEEC GIS System for Spatiotemporal Analysis of Soil Erosion and Sediment Yield",slug:"sateec-gis-system-for-spatiotemporal-analysis-of-soil-erosion-and-sediment-yield",totalDownloads:2787,totalCrossrefCites:0,signatures:"Kyoung Jae Lim, Youn Shik Park, Bernard A. Engel and Nam Won Kim",authors:[{id:"61924",title:"Prof.",name:"Kyoung Jae",middleName:null,surname:"Lim",fullName:"Kyoung Jae Lim",slug:"kyoung-jae-lim"},{id:"61995",title:"Prof.",name:"Bernard A.",middleName:null,surname:"Engel",fullName:"Bernard A. Engel",slug:"bernard-a.-engel"},{id:"102136",title:"MSc.",name:"Younshik",middleName:null,surname:"Park",fullName:"Younshik Park",slug:"younshik-park"},{id:"110952",title:"Dr.",name:"Nam Won",middleName:null,surname:"Kim",fullName:"Nam Won Kim",slug:"nam-won-kim"}]},{id:"23121",title:"Internal Erosion Due to Water Flow Through Earth Dams and Earth Structures",slug:"internal-erosion-due-to-water-flow-through-earth-dams-and-earth-structures",totalDownloads:16240,totalCrossrefCites:4,signatures:"Raul Flores-Berrones and Norma Patricia Lopez-Acosta",authors:[{id:"58505",title:"Dr.",name:"Raul",middleName:null,surname:"Flores-Berrones",fullName:"Raul Flores-Berrones",slug:"raul-flores-berrones"},{id:"139295",title:"Dr.",name:"Norma Patricia",middleName:null,surname:"Lopez-Acosta",fullName:"Norma Patricia Lopez-Acosta",slug:"norma-patricia-lopez-acosta"}]},{id:"23122",title:"Lake Mladotice in the Western Czech Republic – Sediments as a Geoarchive for Flood Events and Pre- to Postcommunist Change in Land Use since 1872",slug:"lake-mladotice-in-the-western-czech-republic-sediments-as-a-geoarchive-for-flood-events-and-pre-to-p",totalDownloads:1862,totalCrossrefCites:1,signatures:"Achim Schulte, Bohumir Jansky and Julius Česak",authors:[{id:"62018",title:"Prof.",name:"Achim",middleName:null,surname:"Schulte",fullName:"Achim Schulte",slug:"achim-schulte"},{id:"62020",title:"Prof.",name:"Bohumir",middleName:null,surname:"Jansky",fullName:"Bohumir Jansky",slug:"bohumir-jansky"},{id:"138264",title:"Prof.",name:"Julius",middleName:null,surname:"Česak",fullName:"Julius Česak",slug:"julius-cesak"}]}]},relatedBooks:[{type:"book",id:"410",title:"Soil Erosion Issues in Agriculture",subtitle:null,isOpenForSubmission:!1,hash:"ab3ad713d24941e8ce0649ae94643ec3",slug:"soil-erosion-issues-in-agriculture",bookSignature:"Danilo Godone and Silvia Stanchi",coverURL:"https://cdn.intechopen.com/books/images_new/410.jpg",editedByType:"Edited by",editors:[{id:"313983",title:"Dr.",name:"Danilo",surname:"Godone",slug:"danilo-godone",fullName:"Danilo Godone"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"20459",title:"Soil Degradation",slug:"soil-degradation",signatures:"Rajendra Hegde, A. Natarajan, L G K Naidu and Dipak Sarkar",authors:[{id:"56582",title:"Dr.",name:"Rajendra",middleName:null,surname:"Hegde",fullName:"Rajendra Hegde",slug:"rajendra-hegde"},{id:"80856",title:"Dr.",name:"A.M.",middleName:null,surname:"Natarajan",fullName:"A.M. Natarajan",slug:"a.m.-natarajan"},{id:"135951",title:"Dr.",name:"L G K",middleName:null,surname:"Naidu",fullName:"L G K Naidu",slug:"l-g-k-naidu"},{id:"135952",title:"Dr.",name:"Dipak",middleName:null,surname:"Sarkar",fullName:"Dipak Sarkar",slug:"dipak-sarkar"}]},{id:"20460",title:"Water Erosion from Agricultural Land Under Atlantic Climate",slug:"water-erosion-from-agricultural-land-under-atlantic-climate",signatures:"Montserrat Valcárcel, Antonio Paz González, Jorge Dafonte, José Manuel Mirás-Avalos, Jorge Paz-Ferreiro, Ildegardis Bertol and Eva Vidal Vázquez",authors:[{id:"51269",title:"Prof.",name:"Antonio",middleName:null,surname:"Paz González",fullName:"Antonio Paz González",slug:"antonio-paz-gonzalez"},{id:"61849",title:"Prof.",name:"Jorge",middleName:null,surname:"Dafonte",fullName:"Jorge Dafonte",slug:"jorge-dafonte"},{id:"61850",title:"Dr.",name:"Montserrat",middleName:null,surname:"Valcárcel",fullName:"Montserrat Valcárcel",slug:"montserrat-valcarcel"},{id:"61851",title:"Prof.",name:"Ildegardis",middleName:null,surname:"Bertol",fullName:"Ildegardis Bertol",slug:"ildegardis-bertol"},{id:"61852",title:"Dr.",name:"José Manuel",middleName:null,surname:"Mirás-Avalos",fullName:"José Manuel Mirás-Avalos",slug:"jose-manuel-miras-avalos"},{id:"61853",title:"Dr.",name:"Jorge",middleName:null,surname:"Paz-Ferreiro",fullName:"Jorge Paz-Ferreiro",slug:"jorge-paz-ferreiro"},{id:"61854",title:"Dr.",name:"Eva",middleName:null,surname:"Vidal Vázquez",fullName:"Eva Vidal Vázquez",slug:"eva-vidal-vazquez"}]},{id:"20461",title:"Micro-Topographic Characteristics in Coordinate with Surface Erosion",slug:"micro-geomorphology-characteristics-in-coordinate-with-surface-erosion",signatures:"Qingfeng Zhang, Longshan Zhao, Faqi Wu and Jian Wang",authors:[{id:"51286",title:"Prof.",name:"Qingfeng",middleName:null,surname:"Zhang",fullName:"Qingfeng Zhang",slug:"qingfeng-zhang"},{id:"86439",title:"Prof.",name:"Faqi",middleName:null,surname:"Wu",fullName:"Faqi Wu",slug:"faqi-wu"},{id:"86440",title:"Dr.",name:"Longshan",middleName:null,surname:"Zhao",fullName:"Longshan Zhao",slug:"longshan-zhao"},{id:"102584",title:"Mr.",name:"Jian",middleName:null,surname:"Wang",fullName:"Jian Wang",slug:"jian-wang"}]},{id:"20462",title:"Losses of Soil and Nutrients from a Purplish Soil on Slopping Lands as Affected by Rain Intensity and Farming Practices",slug:"losses-of-soil-and-nutrients-from-a-purplish-soil-on-slopping-lands-as-affected-by-rain-intensity-an",signatures:"Chaowen Lin, Chunyan Luo, Liangyu Pang and Shihua Tu",authors:[{id:"55413",title:"Prof.",name:"Shihua",middleName:null,surname:"Tu",fullName:"Shihua Tu",slug:"shihua-tu"},{id:"62632",title:"Dr.",name:"Chaowen",middleName:null,surname:"Lin",fullName:"Chaowen Lin",slug:"chaowen-lin"},{id:"62633",title:"Dr.",name:"Chunyan",middleName:null,surname:"Luo",fullName:"Chunyan Luo",slug:"chunyan-luo"},{id:"62634",title:"Dr.",name:"Liangyu",middleName:null,surname:"Pang",fullName:"Liangyu Pang",slug:"liangyu-pang"}]},{id:"20463",title:"Soil Erosion Aspects in Agricultural Ecosystem",slug:"soil-erosion-aspects-in-agricultural-ecosystem",signatures:"Elena Comino, Paolo Marengo and Valentina Rolli",authors:[{id:"59517",title:"Dr.",name:"Elena",middleName:null,surname:"Comino",fullName:"Elena Comino",slug:"elena-comino"},{id:"62653",title:"MSc",name:"Paolo",middleName:null,surname:"Marengo",fullName:"Paolo Marengo",slug:"paolo-marengo"},{id:"62654",title:"MSc",name:"Valentina",middleName:null,surname:"Rolli",fullName:"Valentina Rolli",slug:"valentina-rolli"}]},{id:"20464",title:"Evaluation of Erosion Intensity and Some of Its Consequences in Vineyards from Two Hilly Environments Under a Mediterranean Type of Climate, Italy",slug:"evaluation-of-erosion-intensity-and-some-of-its-consequences-in-vineyards-from-two-hilly-environment",signatures:"Giuseppe Corti, Eugenio Cavallo, Stefania Cocco, Marcella Biddoccu, Giorgia Brecciaroli and Alberto Agnelli",authors:[{id:"62089",title:"Prof.",name:"Giuseppe",middleName:null,surname:"Corti",fullName:"Giuseppe Corti",slug:"giuseppe-corti"},{id:"62092",title:"Mr.",name:"Eugenio",middleName:null,surname:"Cavallo",fullName:"Eugenio Cavallo",slug:"eugenio-cavallo"},{id:"62093",title:"Mr.",name:"Stefania",middleName:null,surname:"Cocco",fullName:"Stefania Cocco",slug:"stefania-cocco"},{id:"62094",title:"Mr.",name:"Giorgia",middleName:null,surname:"Brecciaroli",fullName:"Giorgia Brecciaroli",slug:"giorgia-brecciaroli"},{id:"62095",title:"Dr.",name:"Alberto",middleName:null,surname:"Agnelli",fullName:"Alberto Agnelli",slug:"alberto-agnelli"},{id:"62268",title:"Dr.",name:"Marcella",middleName:null,surname:"Biddoccu",fullName:"Marcella Biddoccu",slug:"marcella-biddoccu"}]},{id:"20465",title:"Hydrological Effects of Different Soil Management Practices in Mediterranean Areas",slug:"hydrological-effects-of-different-soil-management-practices-in-mediterranean-areas",signatures:"Giuseppe Bombino, Vincenzo Tamburino, Demetrio Antonio Zema and Santo Marcello Zimbone",authors:[{id:"56177",title:"Dr.",name:"Demetrio Antonio",middleName:null,surname:"Zema",fullName:"Demetrio Antonio Zema",slug:"demetrio-antonio-zema"},{id:"62045",title:"Dr.",name:"Giuseppe",middleName:null,surname:"Bombino",fullName:"Giuseppe Bombino",slug:"giuseppe-bombino"},{id:"62047",title:"Prof.",name:"Vincenzo",middleName:null,surname:"Tamburino",fullName:"Vincenzo Tamburino",slug:"vincenzo-tamburino"},{id:"62048",title:"Prof.",name:"Santo Marcello",middleName:null,surname:"Zimbone",fullName:"Santo Marcello Zimbone",slug:"santo-marcello-zimbone"}]},{id:"20466",title:"Planting System on Permanent Beds; A Conservation Agriculture Alternative for Crop Production in the Mexican Plateau",slug:"planting-system-on-permanent-beds-a-conservation-agriculture-alternative-for-crop-production-in-the-",signatures:"Agustin Limon-Ortega",authors:[{id:"52208",title:"Dr.",name:"Agustin",middleName:null,surname:"Limon-Ortega",fullName:"Agustin Limon-Ortega",slug:"agustin-limon-ortega"}]},{id:"20467",title:"The Significance of Soil Erosion on Soil Fertility Under Different Tillage Systems and Granitic Sandy Soils in Semi-Arid Zimbabwe: A Comparison of Nutrient Losses Due to Sheet Erosion, Leaching and Plant Uptake",slug:"the-significance-of-soil-erosion-on-soil-fertility-under-different-tillage-systems-and-granitic-sand",signatures:"Adelaide Munodawafa",authors:[{id:"54809",title:"Dr.",name:"Adelaide",middleName:null,surname:"Munodawafa",fullName:"Adelaide Munodawafa",slug:"adelaide-munodawafa"}]},{id:"20468",title:"Effect of Slope Position and Land-Use Changes to Bio- Physical Soil Properties in Nakasongola Pastoral Rangeland Areas, Central Uganda",slug:"effect-of-slope-position-and-land-use-changes-to-bio-physical-soil-properties-in-nakasongola-pastora",signatures:"M. Buyinza and M. Nabalegwa",authors:[{id:"60757",title:"Prof.",name:"Buyinza",middleName:null,surname:"Mukadasi",fullName:"Buyinza Mukadasi",slug:"buyinza-mukadasi"},{id:"60764",title:"Dr.",name:"Muhammod",middleName:null,surname:"Nabalegwa",fullName:"Muhammod Nabalegwa",slug:"muhammod-nabalegwa"}]},{id:"20469",title:"Pastoral Hill Slope Erosion in New Zealand and the Role of Poplar and Willow Trees in Its Reduction",slug:"pastoral-hill-slope-erosion-in-new-zealand-and-the-role-of-poplar-and-willow-trees-in-its-reduction",signatures:"Ian McIvor, Grant Douglas, John Dymond, Garth Eyles and Michael Marden",authors:[{id:"56900",title:"Mr.",name:"Ian",middleName:null,surname:"McIvor",fullName:"Ian McIvor",slug:"ian-mcivor"},{id:"60671",title:"Dr.",name:"John",middleName:null,surname:"Dymond",fullName:"John Dymond",slug:"john-dymond"},{id:"136759",title:"Prof.",name:"Grant",middleName:null,surname:"Douglas",fullName:"Grant Douglas",slug:"grant-douglas"},{id:"136760",title:"Prof.",name:"Garth",middleName:null,surname:"Eyles",fullName:"Garth Eyles",slug:"garth-eyles"},{id:"136761",title:"Mr.",name:"Michael",middleName:null,surname:"Marden",fullName:"Michael Marden",slug:"michael-marden"}]},{id:"20470",title:"Erosion Control in Furrow Irrigation Using Polyacrylamide",slug:"erosion-control-in-furrow-irrigation-using-polyacrylamide",signatures:"Carlos Chávez, Carlos Fuentes and Fernando Brambila",authors:[{id:"55317",title:"Dr.",name:"Carlos",middleName:null,surname:"Chávez",fullName:"Carlos Chávez",slug:"carlos-chavez"},{id:"60920",title:"Dr.",name:"Carlos",middleName:null,surname:"Fuentes",fullName:"Carlos Fuentes",slug:"carlos-fuentes"},{id:"60921",title:"Dr.",name:"Fernando",middleName:null,surname:"Brambila",fullName:"Fernando Brambila",slug:"fernando-brambila"}]},{id:"20471",title:"Soil Erosion Control on Arable Lands from North-East Romania",slug:"soil-erosion-control-on-arable-lands-from-north-east-romania",signatures:"Bucur Daniel, Jitareanu Gerard and Ailincai Costica",authors:[{id:"50794",title:"Prof.",name:"Daniel",middleName:"G",surname:"Bucur",fullName:"Daniel Bucur",slug:"daniel-bucur"},{id:"62016",title:"Prof.",name:"Gerard",middleName:null,surname:"Jitareanu",fullName:"Gerard Jitareanu",slug:"gerard-jitareanu"},{id:"62017",title:"Prof.",name:"Costica",middleName:null,surname:"Ailincai",fullName:"Costica Ailincai",slug:"costica-ailincai"}]},{id:"20472",title:"Terracing as a Measure of Soil Erosion Control and Its Effect on Improvement of Infiltration in Eroded Environment",slug:"terracing-as-a-measure-of-soil-erosion-control-and-its-effect-on-improvement-of-infiltration-in-erod",signatures:"Marcin K. Widomski",authors:[{id:"58898",title:"Dr.",name:"Marcin",middleName:null,surname:"Widomski",fullName:"Marcin Widomski",slug:"marcin-widomski"}]}]}]},onlineFirst:{chapter:{type:"chapter",id:"73406",title:"Workplace Innovation for Social Sustainable Development",doi:"10.5772/intechopen.93791",slug:"workplace-innovation-for-social-sustainable-development",body:'\nDue to the growing market of employment, the Workplace issue needs to be given serious attention [1, 2]. Research findings distinguished that workplace organization, layout, human resource management, top management, workers’ participation, policy and training were overlooked areas in spite of considering the need for strong workplace safety and health improvements approaches through innovative approaches. At various levels, especially at the national level, OSH problems lack top management commitment, national policy and uniform standards. In addition to these factors, absence of awareness within the enterprise, organizations and at individual employees’ level, dearth of cultural norms of workplace health and safety are areas missed unconsidered for the workplace improvement.
\nThe hazards which require innovation at workplace can be classified as health hazards and physical hazards [3]. Health hazards are categorized into; biological hazards such as bacteria, fungi and viral; chemical hazards such as fumes, dusts, smokes, gases, vapors, heavy metals and physical hazards such as noise, temperature, illumination, vibration and radiation. All the mentioned types of workplace hazards which cause stress on our employees can be handled by the science the so-called workplace innovation even though it is a recent emerging workplace improving science.
\nWorkplace in globe is the place where the interaction of people and machine or equipment involves. Unless and otherwise workplace being attractive, safe, healthy and productive for the citizen, it results in disruption of the whole economy and social values in a globe. To bring the workplace productivity and safe workplace to flexible quality, the timely tool is innovation that looks into the mechanism that changes the dynamic workplace movements. The workplace innovation for any organization improvement in productivity and safety of well-being is one of the key variables. This leads the globe and citizens to sustainable development. The outbreaks like COVID-19 have more negative impact on workplace and productivity of the employees. To curb such sudden and unpredictable outbreaks, workplace innovation is very important in setting a new mechanism how to work in controlling such outbreaks to sustain the economy of globe. Therefore, this chapter helps to show new focus points were our globe is changing dynamically with outbreaks. The outbreaks such as COVID-19 or other that may arise in the future should have to be addressed how to challenge this at workplace before it emerges. That is an important issue to consider workplace innovation and consider sustainable development of the society.
\nWorkplace is the environment where people participate and do their operation in their day to day life activities. Workplace can be related with organizational behavior, organizational culture, organizational motivation and conflict. Among the most important variables and considerations of workplace one is workplace safety and health (WSH). WSH issue is remained a neglected socio-economic development priority, particularly in developing countries including Africa. Occupational safety and health (OSH) are becoming priority areas of concern within the spheres of industrialization and the labor market that requires workplace revolution. This is because of industrialization all over the world is developing at a debauched rate and the labor market continues to upsurge. Due to the growing market of employment, the OSH issue needs to be given serious attention [2] at workplace environment. In this chapter, we can distinguish and see that workplace organization, layout, human resource management, top management, workers’ participation, policy and training are some of the areas were overlooked in previous studies that are under studied in spite of considering the need for strong WSH improvements approaches. At various levels, especially at the national level of developing countries, OSH problems lack top management commitment, national policy and uniform standards implementation. In addition to these factors, absences of awareness within the enterprise, organizations and at individual employee’s level, dearth of cultural norms of WSH are areas missed and unnoticed in the workplace improvement process.
\nIt can be seen that occupational health and safety is the concern of human wellbeing that, this day, industrialization and service giving sectors development is accelerating resulting in workplace health problems. WSH existence is in line with the sayings that “Health is Wealth” [4, 5]. In recent years, the quality of health and safety requirements in many countries have been more stringent than was the case before. Hence, pressures from communities have led to the enactment of various safety legislations and safety standards in different countries and regions for different industries [6]. Despite the fact that people are working and spending most of their working hours at the workplace, little attention and resources are accorded to health and safety at workplace [7, 8].
\nIn emerging economies, workplace has been overlooked in their industrial development policies and strategies. They are mostly focused on the production volume or profit undermining the latent effect of unsatisfactory working environment. For instance, in some of African countries like Ethiopia, there had been no workplace policy standing alone for the manufacturing industries and other sectors that enforce WSH of employees and working equipment. Healthy people are expected to contribute more to productivity and innovation. Workplace accidents and absenteeism from workplace site causes productivity loss [8, 9]. The productivity directly related to workplace comfort and work behavior in the organization. Specially, employee productivity and performance increase when there is less conflict, high motivation, good workplace culture, dynamic teamwork and social interaction.
\nWorkplace design and hazards interventions have been seen as barriers in researches. Miroslav et al. [10] found in their studies that barriers identified in manufacturing industries, which need innovation. In this chapter, the barriers identified to intervention of workplace safety and health were negative managements’ attitude, negative workers attitudes, ineffective or excessive legal requirements, bureaucracy, lack of time, lack of training, lack of economic resources, lack of economic results, presence of geographical delocalized activities, and workers participation [11].
\nWhile research conducted on WSH spans across disciplines in medicine, public health, engineering, psychology, and business, researches to date have not adopted a multilevel theoretical perspective that integrates theoretical issues and findings from various disciplines [7]. Nowadays, researches require improving workplace as time bringing new scenarios. The emergency of COVID-19 is one of good example that is changing the global economic and social set up. The workplace innovation is, therefore, very important with regard to this COVID-19 to learn and prepare ourselves to tackle such pandemic situation. Hence, a learning organization is very important in the future global development process to keep sustainable development environment. Learning organization is an organization that promotes management tools concerned with the improvement of individual and organizational learning [12]. This learning organizational process helps the globe to predict new ventures that may happen suddenly and change the global economic, social, cultural, technological, political and environmental dimensions. According to the study of Agneta et al. [13] implementing social sustainable innovation is important for industrial development of workplace environment.
\nUnder this subtopic, it can be seen in subsection of innovation and workplace innovation. This section is presented to show the clear description of innovation, workplace innovation and safety at workplace.
\nStudies have shown that innovation was first introduced by Joseph Schumpeter in 1934 and the researchers call this man as father of Innovation [14]. As researchers put forward their point that Schumper argued that economic development is driven by innovation by a process of “creative destruction.” They said that he argued innovations could be considered “radical” when people generate major disruptive changes, while if these innovations produced small improvements generating a slow change process that people could be considered “incremental.” Joseph Schumpeter [14] finally proposed five types of innovations which are (1) introduction of new products, (2) introduction of new methods of production, (3) opening new markets, (4) development of new sources for raw materials or other inputs; and (5) creation of new market structures in an industry. In this study, we can understand that more of the discussion and division focuses more on product process that unnoticed the workplace services and intangible environmental factors innovation.
\nThe Oslo Manual defines innovation as the implementation of a new or significantly improved product (good or service), or process, a new marketing method, or a new organizational method in business practices, workplace organization or external relations. Thus, the manual moves away from Shumpeter’s typology and reduces it to four types which are (1) product and services innovations; (2) process innovations; (3) organizational innovation; and (4) marketing innovations. Here, we can also see that social innovation or workplace innovation is less considered.
\nAccording to the previous researchers finding, innovation was considered as a phenomenon which for centuries serves the only purpose of making human beings’ lives more comfortable [15]. The same study has considered it as a history, supporting, generating and implementing innovation has been of outstanding importance not only for the well-being but sometimes the survival of individuals, entities and even for whole civilizations and nations. However, innovation is the process of creation, improvement, or adopting new ideas that does not exist in another workplace.
\nWorkplace innovation (WPI) definition is adopted from Pot [16] that is defined WPI as the implementation of new and combined interventions in the fields of work organization, human resource management and supportive technologies. He added that it is a complementary to technological innovation even though it was unnoticed as being a basic workplace environment comfort forming process.
\nWorkplace innovation (WPI) brings radical change in the workers’ environment, thereby enhancing the profitability of companies [1]. It can be said that the term workplace innovation refers to how people are deployed in order to improve performance and also to create good quality jobs [17].
\nStudy also defined workplace innovation (WPI) as conceptualized, developed and implemented practice or combination of practices that structurally makes division of labor and/or culturally focuses on empowerment enabling employees to participate in organizational change and renewal to improve quality of working life and organizational performance [7, 18, 19]. WPI is narrowed down as an ‘HR-toy’ which is resulted decision makers on technological innovation, business model innovation and marketing innovation underestimate and underuse the potential of WPI, as they are largely unaware of the role of organization and people to make nontechnical innovations a success [6, 8]. They stated that within organizations, HR-managers and line- and operational managers too strongly function within separate silos. The technological and economic innovation alone is insufficient to solve today’s social issues, like poverty, environmental pollution, climate control, and geopolitical tensions [20, 21]. WPI is defined as designate new and combined interventions in work organization, human resource management, labor relations and supportive technologies [22]. Workplace Innovation is defined as a social process which shapes work organization and working life, combining their human, organizational and technological dimensions. We can see examples which are including participative job design, self-organized teams, continuous improvement, and high involvement in innovation and employee involvement in corporate decision making. Such interventions are highly participatory, integrating the knowledge, experience, and creativity of management and employees at all levels of the organization in a process of co-creation and co-design. This simultaneously results in improved organizational performance and enhanced quality of working life. It is important to see Workplace Innovation not as an end state but as a dynamic, reflexive process in which all stakeholders are continually engaged in reflecting on, learning about and transforming work processes and employment practices in response to both internal and external drivers. Workplace Innovation is to contribute to sustainable economics, ecological and social change by fostering the innovative capacity of organizations and individuals. Workplace Innovation is considered a necessary enabler of effective technological innovation. Developing and deploying human talent and fostering a willingness to cooperate are an indispensable component of a versatile network economy, relying heavily on participation, dialog and self-organization by engaged individuals working in and between organizations.
\nWorkplace innovation was defined as the process of improving or creating workplace interaction confortable for the organizations. Workplace safety and health needs to be prior area for productivity, workplace comfort and wellbeing improvement. Industrial safety is the focuses on multiple improvements were over all organization involvement based on. In workplace there are numbers of challenges like conflict, health issue, safety, performance and grievance. In general to solve organizational behaviors that results in ill health and performance reduction, workplace innovation has importance. Some of the importance of workplace innovations are sustainability for financial success strategically implementing the social innovation dimension as an integrated part of business operations; sustainable development, increasing the quality of human resources which is a key competitive issue, requiring constant management attention to several dimensions of economic, social, and environmental change; workplace innovations complement economic innovations and are focused primarily on achieving social welfare [23]; improve service of workplace. Innovative workplace helps in increasing workers performance, creating bonds among workers and amendment of managements, upgrading productivity, insuring health and safety of employee, reducing safety cost due to accidents and injuries at work, improving organizational culture toward hard work, building the organization to team up in solving innovative problems, reducing conflicts and increasing motivation, enhancing environmental protection through social corporate integration and enhancing technical innovation success. Therefore, workplace innovation covers broader areas of improvement even though it not defined as technical innovation that commercialize product to the market.
\nAs stated in the previous sections, innovations have the score to optimize manufacturing processes in workplaces in organizations and develop employees’ general experience of work. Here, employers’ association, employer and trade unions have a significant part to play in promoting work organization innovations, which can provide win–win benefits for employees and employers. Change comes when we are working smarter, not harder [3, 24]. Higher productivity goes hand in hand with better communication and higher employability, resulting from both a decrease in absenteeism and an increase in social and vocational competences [25]. Figure 1 indicates that WPI empowers performance of work organization, and employee relationship increasing well-being and OSH final achievement of health condition. The intersection of OSH and WPI is the overall improvement of well-being.
\nOverlap of OSH and workplace innovation (Leiven, 2012).
WPI and OSH have different policies with different objectives and instruments. It should not mix up as WPI is not directed at fewer OAs or ODs or less absenteeism, but it might help. OSH policies refer to healthy and productive jobs. Health is a value in itself. Additionally, healthy people are expected to contribute more to productivity and innovation. Absenteeism causes productivity loss [22]. A healthy workforce is a prerequisite for social and economic development and for productivity. Protecting the health of the workforce through access to decent jobs, universally available health services, and social health protection contributes both to sustainable development as well as to worker productivity [26]. Hazardous working conditions and unemployment currently contribute to a very large avoidable burden of disease and loss of income-earning potential [27]. In the discussions made previously, workplace innovation contribution is remarkable.
\nIn solving OSH problems, one of the methods is workplace innovation (WPI). WIP is different from technical innovation (scientific technologies) in which new end product or a service development process is undertaken, rather than nontechnical innovation (supportive technologies). It is defined by Pot [16] as the implementation of new and combined interventions in the fields of work organization, human resource management and supportive technologies. It is a complementary to use technological innovation. The chapter stresses new and combined interventions, by which new is understood as innovation and combined as a bundle of measures referring to work organization, human resource management and supportive technologies. Thus, innovation is not a goal but a means in which it improves a process performance [3]. There is a growing importance of nontechnical factors to foster economic growth; implying technological innovation alone is not enough to make renewal of an organization’s work. It needs efforts of looking into overall process optimization and changing organizational systems. Innovations considered as nontechnical factors are for, instance, high performance work systems and new ways of working. Such nontechnical innovations are considered by studies interchangeably as organizational innovation [20, 28], workplace innovation [16, 22], and social innovation in the workplace [24, 25, 29, 30]. These innovations are neither the end products (new products or services), nor the Research and Development expenditures. But they deal with renewal and improvement of the deployment of people, management, human resource, organizational structure, primary process, marketing methods, production methods, organizational policies, redesigning, workplace improvements and refreshment of systems.
\nThe major problems which are not addressed in workplace improvement are workplace innovation and the meaning it conveys in recent times. Innovation was painstaking and it is the only new idea creation and/or new product development process as discussed under many literature reviews. Hence, workplace innovation was not stated well in the research findings like that of ordinary innovation [3]. The author of this study has identified workplace innovation being ignored in OSH improvement system one of the remaining improvement factors [1, 25].
\nThis study defined how workplace safety and health is influenced by workplace innovation, and how workplace innovation contributes to workplace overall improvements. The systematic review has summarized the recent scientific evidence on the effectiveness of the innovation impact on workplace safety and health. The review also reflected the relationships between innovation and OSH problem contributing factors [1, 22]. The present systematic review is thus an attempt to address the challenge and fill the gap that exists on the relationship and impact of innovation in relation to workplace safety and health overall characteristics for controlling of occupational accidents and diseases in the workplace.
\nCompetitiveness is not achieved without innovation, technology and the use of science aggregation in workplace safety and health improvement as one of the typical business processes indication [1, 3]. Researchers wind-up their results that in organizational innovation, it is possible to see into workplace arrangement, attractiveness and employee satisfaction with the work they are doing.
\nIn general, workplace innovations were found to play a key role in decreasing workforce and increasing labor productivity; global competition and knowledge based economy (development of competence and skills); making new technology work through innovative work organization [1]. Workplace innovation explains a larger part of innovation success than technological innovation; high performance work systems have a positive effect on performance outcomes (including labor productivity, and innovation levels); diversity and equality systems have a positive effect as well; on reduced employee turnover (considered to be an indicator for employee wellbeing).
\nWorkplace innovation helps to improve workplace performance, quality of working life, human resource management, and policy issues. European countries are initiating these workplace innovation programmes [22]. Therefore, workplace innovation programme is indispensable for the policymakers to improve workplace safety and health. Studies indicate that workplace innovation and safety issues have been ignored in developing countries. Therefore, this calls for the need to continue conducting research in the future to modernize workplace safety and health improvements. At the same time, this section highlights the workplace innovation is one of the methods to OSH improvement approaches (Figure 2). This is a section where it is important to come out from the black box and extend our research approaches to diversified factors with different tools looking forward to dynamic changes to meet the demands of globalization. Workplace innovation needs human resources, technology and knowledge. The presences of these drivers of innovation are the primary inputs of workplace innovation. The measures or initiatives within the model of workplace innovation are divided into three elements; namely work organization, labor relations and network relations. Work organization focuses tasks to be accomplished with autonomy, on opportunities to work either together or independently on employees’ choice to determine their working hours in consultation. It means work is facilitated or made flexible by using ICT, among other things and employees spend part of their working hours on developing new ideas, while diverse workforce uses its time and lobor effectively. Meanwhile the logistical processes are organized as efficiently as possible in consultation with employees.
\nModified model of workplace innovation at the organization level [1].
The second element refers to giving high priority to labor relations. This means focusing on employees and management jointly formulating the organization’s ambitions, with employees having a say in the organization and its decisions, management and employees encouraging each other to learn innovate and to show creativity, and daring, and most importantly, management and employees trusting each other in undertaking joint endeavors. It also means employees having autonomy in managing their tasks, employees and managers admitting their mistakes and taking corrective measures in time. The third major element is that of prioritizing network linkage both inside and outside the firm. They focus on components within the organization to work with peers and partners such as suppliers, clients, and people in the community, etc. Knowledge organizations are involved to deal with community and social issues by strengthening and multiplying the ties within the networks.
\nThe model then looks at the goals or desired effects of workplace innovation. These effects can be of direct benefit to the organization and/or employees or be indirectly beneficial to society (Figure 2). The workplace innovation goals are aimed at to improving organizational, employee and or societal benefits.
\nThe workplace innovation improves workplace condition and employee’s moral. The process needs to have cyclical check at each stage of improvement. The approach creates workplace innovation with positive effects. These effects are improved well-being, productivity, organizational performance, better use and development of human talents, and increase in economic levels attributed to firms, workers and the society in general.
\nSustainable development is the important aspect of the global society to overcome all the challenges of the citizen’s health, safety, wellbeing and overall productivity performance. Sustainable can be defined as foundation of the citizens economic, social and environmental set up continuous existence and transition after generation to generation without major change from now onward in the future. This definition is drawn out from prospective point of view of Mirland [31] and Amponsah-Tawiah [32] model. Both of them defined sustainable development depends on the three dimensions or pillars which are economic, social and environmental. The one that make this definition to most of the researchers common is the intersecting points at each dimension in providing a clear picture to their sustainability dimension. For instance, the common area between economic and social dimension is social equity and the common point of economic and environmental dimension is results in sustainable economy of the citizen. The social and environmental intersection ends up with healthy environment that is not polluted and convenient to all life on the earth. The economic dimension includes the jobs, employment, capital assets, investment, creation of worth & prosperity; the environmental dimensions include climate, water, natural resources and biodiversity while that of social dimension encompasses the elements such as health and safety, skilled work force, knowledge workers, community development, inclusion and cohesion. It can be learned that from Figure 3 the link and the results of the integration of the three dimensions mentioned in the discussion are the indication of sustainable development pillars with the so far studies finding. However, there is another approach which viewed the sustainable development pillars in other angle introducing other factors.
\nThe three dimensions of sustainable development [31, 32].
The previous studies conducted on OSH link with sustainable development showed that there are three pillars of sustainable development as economic, environment and society [1]. The studies have unnoticed that culture, politics and technology are the three new pillars as stated by the researches [1]. These researchers tried to include the other three new dimensions to sustainable development pillars mentioned in the previous researchers finding. These were culture, technology and political dimensions.
\nHow culture affect sustainable development of workplace can be described in short. Culture of workplace involvement induces positive or negative effect on productivity, safety and health of the organization. The culture of safety practice and workplace comfort to employees is the one as a dimension. We can say social dimension can consolidate culture but the culture of workplace safety and health improvement to ward productivity improvement was summered by other social factors. For that purpose, culture of workplace safety and health is demanded to stand as individual dimension. The other dimension which is not considered boldly was technological change. The technological development and introduction of new advanced systems enforced the globe to enhance workplace improvement. The technological dimension also considered as a pillar since the chronological changes are bringing to the globe different technological usage and utilization. But the uses and impact of technology was not considered as sustainable development pillar as it was not boldly shown in the researches and practice. The third new dimension introduced as pillar of sustainable development is political dimension. The globe is swaying by the different political challenges. It has not been considered as the one of the dimensions that affects sustainable development. The evidences and analysis of these newly introduced factors can be seen in the article cited in [1, 33]. The six pillars introduced and the existing once is indicated in Figure 4.
\nPillars of sustainable development and approaches to safety and health [1].
The impact of human behavior (culture) on nature gives increasing rise to public and governmental concern [34]. A learning culture, defined as set of shared beliefs, values and attitudes favorable to learning can be seen as an essential part of the organizational context within which specific organizational design principles and types of work organization are successfully implemented [12].
\nIt is very important to ask the question what are the key considerations workplace designers take into account when designing and building sustainable workplaces of the future? Sustainability in the workplace has the potential to affect many aspects of an organization, including employee productivity [35]. According to the same study [35] sustainable designers, such as LEED (Leadership in Energy and Environmental Design) professionals, claim that sustainability has numerous positive impacts in the workplace and they impact including fewer employee sick leaves days, increased building occupant satisfaction, and increased employee productivity. The workplace safety matters the organizational productivity increment and wellbeing. The workplace well designed and built, creates high productivity of employees, keep the health of employees and reduce the cost of the organizations that incurred due to the accidents at workplace. This results in increased organizational sustainable economy. A bad office can really impact on output and happiness. The workplaces designed and prepared for employees must meet the mind and physical of the employees so that they are healthy, happy, comfortable and psychological in rest. To create a space that truly encourages a culture of wellness for employees, it is critical to identify the organization’s project goals and needs through a process that emphasizes collaboration, consensus building, and innovation. The sustainability of organization is guaranteed when we do have people-oriented workplace design. To make workplace more productive and sustainable for the organization, it is important to focus on the psychological benefits and the wellbeing of workers; how technology integrates and enhances workflow; and the sustainability of the initial build and ongoing maintenance. Hence, the safest workplace design guarantees the employees satisfaction and organizational sustainability in reducing overall costs that comes from multifaceted directions.
\nIn general, we can conclude that this chapter has given the highlight of workplace innovation for sustainable development putting ignition toward in-depth research works by many researchers. It has focused on the workplace innovation and sustainable development in consideration of workplace innovation and technical innovation differences and importance. Sustainable development dimensions are also discussed from the point of three pillars and six pillars with their differences. The dimensions in the previous study mentioned are environmental, social, and economic dimensions. The new three introduced in addition to these are cultural, political, and technological dimensions. These areas are very crucial to focus in the future research to see one by one in detail and their individual advantages and disadvantages. The workplace innovation contribution is also discussed with respect to workplace safety and health, social corporate, and importance in industrial development. The workplace innovation and technical innovation difference and contribution have been considered even though they require further studies.
\nThe authors declare that there is no conflict of interest.
Open Access publishing helps remove barriers and allows everyone to access valuable information, but article and book processing charges also exclude talented authors and editors who can’t afford to pay. The goal of our Women in Science program is to charge zero APCs, so none of our authors or editors have to pay for publication.
",metaTitle:"What Does It Cost?",metaDescription:"Open Access publishing helps remove barriers and allows everyone to access valuable information, but article and book processing charges also exclude talented authors and editors who can’t afford to pay. The goal of our Women in Science program is to charge zero APCs, so none of our authors or editors have to pay for publication.",metaKeywords:null,canonicalURL:null,contentRaw:'[{"type":"htmlEditorComponent","content":"We are currently in the process of collecting sponsorship. If you have any ideas or would like to help sponsor this ambitious program, we’d love to hear from you. Contact us at info@intechopen.com.
\\n\\nAll of our IntechOpen sponsors are in good company! The research in past IntechOpen books and chapters have been funded by:
\\n\\nWe are currently in the process of collecting sponsorship. If you have any ideas or would like to help sponsor this ambitious program, we’d love to hear from you. Contact us at info@intechopen.com.
\n\nAll of our IntechOpen sponsors are in good company! The research in past IntechOpen books and chapters have been funded by:
\n\n