Mikhail E. Belkin

By Mikhail E. Belkin

Part of the book: Photodetectors

By M. E. Belkin, L. Belkin, A. Loparev, A. S. Sigov and V. Iakovlev

We address the challenge of decreasing the size, cost and power consumption for practical applications of next generation microwave photonics systems by using long-wavelength vertical cavity surface emitting lasers. Several demonstrations of new concepts of microwave photonics devices are presented and discussed.

Part of the book: Optoelectronics

By Mikhail E. Belkin, Vladislav Golovin, Yuri Tyschuk, Mikhail G. Vasil’ev and Alexander S. Sigov

In the process of design, a developer of new microwave-photonics-based RF apparatuses is facing a problem of choosing appropriate software. As of today, the existing optical and optoelectronic CAD tools (OE-CAD) are not developed like CAD tools intended for modeling of RF circuits (E-CAD). On the contrary, operating at symbolic level, modern high-power microwave E-CAD tools simply and with high precision solve this problem, but there are no models of active photonic components in their libraries. To overcome this problem, we proposed and validated experimentally a new approach to model a broad class of promising analog microwave radio-electronics systems based on microwave photonics technology. This chapter reviews our known, updated, new models and simulation results using microwave-electronics off-the-shelf computer tool NI AWRDE to pursue advanced performances corresponding to the last generation of key photonics structural elements and important RF devices on their basis.

Part of the book: RF Systems, Circuits and Components

By Mikhail E. Belkin, Dmitriy Fofanov, Vladislav Golovin, Yuriy Tyschuk and Alexander S. Sigov

In this chapter, we review the worldwide progress referred to designing optical beamforming networks intended to the next-generation ultra-wideband millimeter-wave phased array antennas for incoming fifth-generation wireless systems, which in recent years is under the close attention of worldwide communication community. Following the tendency, we study in detail the design concepts below true-time-delay photonics beamforming networks based on switchable or continuously tunable control. Guided by them, we highlight our NI AWRDE CAD-based simulation experiments in the frequency range of 57–76 GHz on design of two 16-channel photonics beamforming networks using true-time-delay approach. In the first scheme of the known configuration, each channel includes laser, optical modulator, and 5-bit binary switchable chain of optical delay lines. The second scheme has an optimized configuration based on only 3-bit binary switchable chain of optical delay lines in each channel, all of which are driven by four lasers with wavelength division multiplexing and a common optical modulator. In the result, the novel structural and cost-efficient configuration of microwave-photonics beamforming network combining wavelength division multiplexing and true-time-delay techniques is proposed and investigated.

Part of the book: Array Pattern Optimization

By Mikhail E. Belkin, Tatiana N. Bakhvalova and Alexander S. Sigov

For today, much attention in the upcoming 5G New Radio (NR) mobile networks is paid to radically expanding the available spectral bands up to millimeter wavelengths (MMW). Following this tendency, currently, the local telecommunication commissions of various countries are proposing and harmonizing the plans of frequency allocation in MMW band, which will be reviewed this year at the World Radio Conference (WRC-2019). Another milestone of great importance is the development of access networks. Here, well-known radio-over-fiber (RoF) technology is considered as the most promising approach, which is implemented based on fiber-wireless (FiWi) architecture. Elaborating the direction, in this chapter we review the worldwide progress of RoF-architected 5G NR access networks and highlight our last simulation results on design and optimization of millimeter-photonic-based FiWi interface. All schemes are modeled using VPIphotonics Design Suite software tool. In the result of simulation experiments, optimal design principles of optical distribution network (ODN), fiber-wireless interface (FWI), and fiber-wireless fronthaul network (FWFN) as a whole have been proposed, described, and validated.

Part of the book: Recent Trends in Communication Networks

By Mikhail E. Belkin, Tatiana Bakhvalova, Vladislav Golovin, Yuriy Tyschuk and Alexander S. Sigov

In this chapter, with the goal to recover an optimal mean for computer-aided modeling and simulating a newer class of microwave-photonics-based radio electronic apparatuses, a number of comparative simulation experiments for the basic microwave band electronic devices and systems using well-known software tools referred to photonic design automation or upgraded electronic design automation platforms are carried out. As a result, it is shown that exploiting the software of upgraded electronic design automation platform provides significantly better accuracy of calculations for the devices and systems of this class.

Part of the book: Modeling and Simulation in Engineering

By Mikhail E. Belkin, Leonid I. Zhukov, Dmitriy A. Fofanov, Mikhail G. Vasil’ev and Alexander S. Sigov

A detailed comparative experimental study was carried out to pursue advanced performances corresponding to the key parameters of two photodetectors based on vertical cavity surface emitting laser (VCSEL) operating in free-running or optically injection locked mode, as well as an inherent pin-photodetector. During the preliminary study, the key static and dynamic parameters were quantitatively determined and the optimal operating modes were derived for the both versions of VCSEL-based photodetectors as separate microwave-photonics circuit elements. Based on them, a final experiment was conducted to evaluate the processing quality, when one of the versions of VCSEL-based photodetectors or a inherent pin-photodetector is implemented as an optical-to-electrical converter for a typical microwave-photonics circuit that processes 120-Mbps 16-position quadrature amplitude modulated signal on the radio frequency carrier of 1–6 GHz. As a result, it was confirmed that better processing quality, i.e. Error Vector Magnitude value of less than 4%, could be obtained by using the free-running VCSEL-based photodetector version.

Part of the book: Light-Emitting Diodes and Photodetectors