Open access peer-reviewed chapter - ONLINE FIRST

Driving a Sustainable University-Industry Partnership

By Zainuddin Abd Manan and Sharifah Rafidah Wan Alwi

Submitted: May 27th 2020Reviewed: November 11th 2020Published: November 28th 2020

DOI: 10.5772/intechopen.94990

Downloaded: 53

Abstract

There has been a lot of emphasis on the need for academia-industry collaboration. A successful and sustainable academia-industry partnership can result from a university’s efforts in driving values in its collaboration with industry. This chapter describes a model for mainstreaming a sustainable university partnership with industry through the university’s academic curriculum. The University-Industry Innovation eXchange (UNIX) internship program is a project-based industrial training scheme that is integrated with research projects to provide students with an engaging experience of working with industry for up to one year to solve practical industrial problems. Successful implementation of UNIX projects within the Universiti Teknologi Malaysia’s (UTM) work-based curriculum contributes toward nurturing life-ready and job-ready graduates, development of resilient and sustainable organisation through improved operations, and enhanced university-industry partnership.

Keywords

  • work-based learning
  • sustainable partnership
  • university-industry innovation eXchange (UNIX)
  • sustainable organisation
  • industrial training

1. University’s role in driving sustainable partnership with industry

Among the key roles of a university is to educate and empower people with knowledge and skills so that they will become prosperers of lives. To effectively achieve this mission, universities must formulate a sustainable partnership with industry, government and community, apart from with other universities. In order to foster and drive a sustainable partnership, a university must begin by building a compelling case and unique offerings on how the partnership could benefit collaborators. This chapter presents the strategies and unique offerings of Universiti Teknologi Malaysia (UTM) in creating a sustainable partnership through a work-based curriculum that contributes toward nurturing life-ready and job-ready graduates, development of resilient and sustainable organisation through improved operations, and enhanced partnership with industry.

At UTM, the traditional practice of having a short industrial training or odd career days toward the end of a degree program has undergone sweeping transformation toward a customised and immersive UTM-Industry Innovation Exchange (UNIX) project that includes up to 50% work-based learning elements that is implemented in close collaboration with UTM industry. The partnership combines industrial training, trans-disciplinary action research and design projects that embed contemporary challenged-based topics including elements of Fourth Industrial Revolution (4IR) as part of student learning time (SLT) to enable students to be inclusively involved in real-life problem solving that benefits industry and community.

2. UTM-industry innovation eXchange (UNIX) program

The School of Chemical and Energy Engineering, Universiti Teknologi Malaysia (UTM-SCEE) founded the “UTM-Industry Innovation Exchange” (UNIX-Internship) project back in 2010 as one of its signature global branding through creativity and innovation (GBCI) project. UNIX is aimed at value-adding, expanding and maximising the benefits of the industrial training program to university, students and the industry.

Since 1983, UTM-SCEE sends an average of 150 undergraduate students to undergo a ten-week Industrial Training (InTra) program. The purpose of InTra is to provide students with industrial exposure and experience before they graduate. This training is also designed to meet the accreditation requirements for the engineering program by the Engineering Accreditation Council of Malaysia (EAC) of Malaysia.

Over the years, UTM-SCEE received numerous feedbacks from stakeholders, especially from the industry and students regarding InTra. Most companies found that they were not able to assign InTra students with reasonably challenging projects because of the short ten weeks duration of the InTra. Most industries typically accept students for InTra just to fulfil their corporate their social responsibility (CSR) goals. Except for providing students with exposure to day-to-day industrial operations, industries generally do not expect any added-value or contributions from universities through the InTra program. As a result, there is no commitment from the industry to provide students with the opportunity to apply their knowledge to solve industrial problems.

In some cases, there are mismatches between internship training provided by the company and the students’ industrial training programme requirement. In a paper reported by Ayob et al. [1], some engineering students were given tasks such as the promotion of business product and management of foreign workers, which are not related to their studies. According to the article by Feijoo et al. [2], it is emphasised on the need to introduce a more in-depth study of specific topics that could be included as an additional project scope to improve industrial training.

Many universities generally regard the InTra program as not more than a means to provide short industrial exposure to students. Students generally appreciate their short industrial exposures but found that they were not able to fully benefit from undergoing InTra. The minimum of eight weeks internship period (according to the Engineering Accreditation Council guide [3]) is typically too short for them to be immersed in projects to solve industrial problems and does not allow them to deeply apply the theories and knowledge that they have learnt over the period of their studies. Phang et al. [4] stated that a longer industrial training duration can increase the job-readiness and the future career development of engineering undergraduates. According to the authors, many parties regard the standard 10–12 weeks internship period as being too short and should be reviewed. The need for a longer industrial training duration is also supported by the study of Jamaluddin et al. [5]. In addition, Filho et al. [6] stated that, to enhance sustainability in the curricula, academia needs to develop a more engaging collaborative approaches in working with industries.

SCEE fully recognised the limitations of the traditional InTra program and the importance of offering a practical and mutually beneficial cooperation program for the industry. In October of 2010, SCEE established the UNIX-Internship project as one of SCEE’s global branding projects through creativity and innovation (Global Branding through Creativity and Innovation - GBCI).

UNIX is an innovative program to foster and facilitate a win-win” collaborative partnership via human capital development, research as well as consultancy services between UTM-SCEE and the industry. UNIX integrates three core courses offered by the UTM- SCEE, namely the (i) Industrial Training (IT) and (ii) Undergraduate Project 1 and II (UGP1 & UGP2). Integration of professional work placement and engineering research project was also introduced by Cork Institute of Technology, Ireland [7]. Their industrial attachment model includes four months of professional work placement, followed by seven months of engineering research project involving the company where the students are placed.

The objectives of the UTM-SCEE UNIX project are to:

  1. enhance graduate employability via industrial/government, project-oriented internship programs,

  2. form a vibrant, symbiotic, and sustainable linkage between UTM and the industry/government/community

  3. create a market-driven as well as technology-driven R & D ecosystem.

To ensure the success and effectiveness of the program, a pilot-scale UNIX-internship at SCEE was initiated by selecting 10% of the total students to undergo InTra via the UNIX program. Selected students were placed in industries that have become members of the UNIX consortium and will conduct training/activities related to pre-agreed research projects. During the InTra, students will be co-supervised by the industry as well as by a research project supervisor from SCEE. The UNIX program spans across one academic year involving UGP 1 (Semester 1), ten weeks InTra and UGP 2 (Semester 2).

2.1 Stages of UNIX implementation

The SCEE UNIX-Internship program involves three stages of implementation:

Stage 1: Project Conception

This stage involves a discussion between the UTM team comprising of the UNIX committee and the prospective research leader, and the industry. The UTM team begins by presenting the possible research topics, the offer for collaboration initiatives and UNIX as one of the possible collaborative programs for the company to consider as a starting point. The meeting is aimed to identify possible areas of collaboration and specific projects of interest to companies.

Stage 2: Appointment of Academic and Industrial Supervisors

The second stage of UNIX involves the appointment of the research and industrial supervisors with expertise relevant to the needs and interests of the industry, and in line with the academic requirements. This stage involves more detailed discussions between the supervisor and the company to come up with a project proposal that will address the needs of all parties involved.

Stage 3: Selection of students

In this stage, the UNIX committee identifies students to participate in the UNIX program based on (i) the project topics agreed upon by UTM research supervisors and UNIX consortium companies, and (ii) the performances of students in the academic as well as extra-curricular activities.

Typically, between 10 and 15% of the total students undergoing IT will be selected to undergo the UNIX program. Selected students will be placed in companies that have become members of the SCEE-UNIX consortium to conduct market-driven as well as industry-driven research projects that typically begins with state-of-the-art literature and technology screening during their Undergraduate Project 1 (from February until May of the academic year). This is followed by the student undergoing industrial internship attachment that involves industrial data collection and analysis by the student from June until early September. The project closes with the compilation and presentation of results and proposed solutions to the company in December. During the one-year course of UNIX, students will be supervised by an academic and an industrial supervisor. Table 1 shows the typical UNIX-Internship timeline.

Table 1.

UNIX-internship timeline.

2.2 Benefits of UNIX

From the feedbacks and evaluations conducted on the industry, students, and supervisors, it has been found that the UNIX-Internship program has provided a positive learning experience that has significantly impacted the cognitive and affective domains of learning in students. Students developed problem-solving, time management, communication and team working skills during the 1-year course of continuous communication and engagement with industry. This allows them to function more effectively in learning together and in producing high-quality engineering solutions. The feedbacks also show that there is significant inculcation and drive toward sustainable development practices from the aspect of knowledge as well as behaviour. One of the most vital points of UNIX is the effectiveness of collaboration between faculty and industry in successfully solving complex and practical industrial problems. Such collaboration enriched participating students and faculties, and contributed toward sustainable development of organisations. All in all, the program has become an innovation that can sustainably provide a comprehensive and dynamic learning environment that had enhanced deep learning and instill positive behaviours among students and collaborating parties.

Follow are the multiple benefits of the UNIX program:

2.2.1 To industry

The human resource support to perform cutting-edge R & D provided by UNIX has enabled industries to:

  • Gain competitive technical and commercial advantages and allow industries to achieve sustainable industrial operations. To date, UNIX has led to improved industrial processes, productivities, and profitability as well as enhanced safety and environmental practices for more than 100 local and multinational companies in Malaysia and abroad.

  • Gain access to human resources with high-level generic as well as technical skills to solve complex problems encompassing optimal operations, sustainable development, safety-health-environment, economics & project management.

  • Gain access to academic resources such as R & D grants, research expertise and facilities toward enhancing a company’s competitive edge.

2.2.2 To the academia, and the nation

UNIX enables:

  • The university and the nation to create an ecosystem of market-driven R & D through synergistic industry-academia-government-community engagement.

  • Students and staff to gain extended exposure and experience working and engaging on collaborative projects with industry.

  • Students’ employability, and faculty members’ skills to be enhanced. This will ultimately contribute toward industrial and national productivity.

2.3 Sample of UNIX projects

Table 2 shows the list of industry collaboration projects that have been successfully implemented since 2006.

CompanyR&D projectsYear startedStudent involvement
BERNASToward a Resource-Efficient, Integrated Rice Mill Complex – Optimisation of Rice Supply Chain20091 PhD
Optimisation Rice-Husk Based CHP System20081 undergrad
CCMDevelopment Of Math Models for Retrofit based on Minimum Water Network Technique and considering multiple contaminants20091 undergrad
1 MSc
Combined Mass and Heat Exchange Networks20091 MSc
TITAN PetchemComputational Fluid Dynamics Modelling of Ethylene Cracker Furnace20082 undergrads
Development of Soft Sensor for Ethylene Cracker20091 PhD
Steam Trap Optimisation20081 MSc
Mechmar BoilerTechno-Economic Feasibility of CDM Project from Palm Oil Waste20081 MSc (part time)
Malaysian Energy Centre & Malaysian Venture CapitalOptimal-Audit, Optimal-Heat, Optimal-Water Software Development20065 undergrads, 2 MSc, 2 programmers
Pan Century Oleo Chemical (PCOC)Maximum heat recovery network and hydraulic system analysis20071 undergrad
Maximum Heat Recovery System (Pinch Analysis)20071 undergrad
FELDA Oil ProductsHeat recovery network retrofit20081 undergrad
MIMOS Semiconductor (MySEM)Cost Effective Minimum Water Network using graphical approach20061 PhD
1 undergrad
Malaysian Newsprint Industry (MNI)Maximum water recovery with regeneration targeting using numerical method20061 MSc
Optimisation of CHP system20081 MSc
PolycoreElectrical Energy Management20082 undergrad
InfineonOverall Plant Utility Optimisation20081 MSc (part time)
Ethylene MalaysiaPower recovery network20061 MSc
TITAN Polymer (M) Sdn BhdModelling The Product Quality and Production Rate of Propylene Polymerisation in Industry Reactors
Formulation of Modelling and Simulation Algorithm for Propylene Homopolymerization Loop Reactor
Artificial Neural Network Modelling of Propylene Polymerisation in Industrial Loop Reactors
Development and Simulation of Hybrid Model for Propylene Polymerisation in Industrial Reactors
20083 MSc
4 undergrads
Kempas Edible Oil Sdn BhdDevelop a prediction model for:
Phosphoric acid and bleaching earth dosage for degumming and bleaching process, respectively, in palm oil refinery.
Product quality of the refined oil from degumming and bleaching process.
20092 undergrads
Mensilin Holdings Sdn BhdOptimisation of decentralised electricity generation from biogas and biomass.20101 PhD
Kerry IngredientsModelling and optimisation of Industrial Spray Dryer20101 undergrad
Kerteh Petronas Gas BhdModelling of Benfield CO2 removal system
Integrated reformer Methanol with natural gas plant
Life cycle analysis (LCA)
20102 undergrads
PPNJ, Kahang, KluangPerformance Study of POME Treatment using SBR20081 undergrad
PPNJ, Kahang, KluangPerformance Study of POME Treatment using MBR20091 undergrad
PPNJ, Kahang, KluangCost Benefit Analysis of Producing PHA from POME20101 undergrad
Agensi Nuklear MalaysiaCharacterisation and Properties of Ethylene Vinyl Acetate/ Sepiolite Nano Composite
Preparation of Polyamide-6 Polypropylene EFB Composite
20122 undergrads
Lembaga Minyak Sawit Malaysia (MPOB)Study of Polylactic Acid (PLA)/Empty Fruit Bunch Fibre (EFBF) Compatibilizer With Maleic Anhydride
Low Density Polyethylene/Oil Palm Mesocarp Fibre Composite
Effect of Inorganic Plasticiser On Low Density Polyethylene/Palm Pressed Fibre Composite Film
Polyurethane/Oil Palm Biomass Fibres Composite Foam
20124 undergrads
PGEO Edible Oils SdnBhdBlending of Polymer with Shea Latex for Plastics Applications
Blending Of Polymer with Shea Latex for Plastics Applications
20132 undergrads
Agensi Nuklear MalaysiaSuspended Solid Removal by Natual Adsorbent
Oil Removal from Superabsorbent For Waste Treatment
20132 undergrads
Lembaga Getah MalaysiaPreparation of Nanoparticle Assembly Using Natural Rubber Latex20131 undergrad
Lipidchem Sdn BhdFormulation of Water-soluble beta carotene powder palm oil.20131 undergrad
Lipidchem Sdn Bhd1. Formulation and pilot prototype of Water soluble MCT powder from coconut oil20141 undergrad
Naturemedic Supply Sdn Bhd1. Anti-inflammatory properties of herbal supplement for gout, R-38.
2. Anti-inflammatory and antioxidant properties of botanical drinks
20142 undergrads
Pantai Medivest1. Detailed Design of Heat Recovery System and Fuel Switching20092 Master
Malakoff R&D Sdn Bhd1. Feasibility of study of steam demand requirement in Tanjung Langsat industrial area20111 UG
Jabatan Alam Sekitar1. Development of Environmental Impact Assessment (EIA) guidelines for solid waste incineration plant20111 PhD
Pertamina1. Maximising heat recovery for retrofit20111 PhD Student, 1 Undergrad Student
Middle Distillate Plant1. Retrofit of Middle Distillate Refinery Plant for Utility Conservation Using Pinch Analysis20123 PhD Students
Synthomer1. Sustainable energy management system.20121 MSc student
2. Cooling load optimization20121 Undergrad student
3. Batch heat integration with exothermic reaction20121 Undergrad Student
Mudra Tropika1. Water reuse and rainwater harvesting design20121 Master
UTM1. Carbon emission reduction in UTM20121 Master
Iskandar Malaysia1. Low carbon society2012–20155 PhD, 8 Master, 2 UG
Institute Development Bank1. Draft-1 of the Green Technology Blueprint for the OIC Countries20134 PhD
Evyap Sabun Sdn Bhd1. HAZOP analysis and 3-D pipe modelling
Design Gap Analysis
2013 and 20143 PhD students
AMR Sdn Bhd1. Cogeneration feasibility study for hospital clinical waste heat recovery20141 PhD
Johor Port Authority1. Ships emission analysis at Johor Port and Port of Tanjung Pelepas20151 Master
Sterling Engineering Sdn Bhd1. Heat pipe operability study20152 UG
UTM1. Energy factor analysis for university20151 UG
Malaysian BioXcell Sdn BhdGreenhouse Gas Emission Reporting System Software20151 undergrad
Total113 students

Table 2.

List of industry on our UNIX-internship program.

2.4 International Paper publication from industrial cooperation

Some samples of collaborative projects related to the sustainable development of organisations published in high impact magazine articles and journals include:

  • Article in ‘Chemical Engineering’ magazine published with MIMOS Semiconductor Sdn Bhd [8].

  • Article in ‘Chemical Engineering Progress’ magazine published with MIMOS Semiconductor Sdn Bhd [9].

  • An international journal published with MIMOS Semiconductor Sdn Bhd in the Journal of Environmental Management, which currently has an impact factor as high as 5.65 [10].

  • An international journal published with the Malaysia Energy Center (MEC) in the Renewable and Sustainable Energy Reviews Journal, which currently has an impact factor as high as 12.1 [11].

2.5 Awards & recognitions

UNIX has also led to recognition and awards such as Prince Sultan Abdul Aziz International Prize for Water [12] which is the “spin-off” results of the collaboration with MIMOS Semi-Conductor and Sultan Ismail Mosque in UTM (see Figure 1). Table 3 shows the list of water savings from UNIX projects.

Figure 1.

Prince Sultan Abdul Aziz international prize for water as a result of the UNIX program.

UTM’s Sultan Iskandar MosqueFW reduction: 95.3%
WW reduction: 64.7%
Savings = USD 5, 400/yr.
Payback period = 5 years
MIMOS Semi-conductor (Near) Zero-Discharge Semi-Conductor PlantFW reduction: 85.1%
WW reduction: 97.7%
Savings = RM 190, 000/yr.
Payback period = 4 mths
CCM Chemicals Holistic Water MinimizationFW reduction: 35.8%
WW reduction: 100%
Savings = USD 105,000 /yr.
Payback period = 1.87 yrs

Table 3.

List of water savings from UNIX projects.

In addition, SCEE also won USD 100,000 Islamic Development Bank (IDB) Prize of Excellence in Science and Technology 2017, cited as an Institution having achieved outstanding contribution to a given scientific discipline” (Figure 2).

Figure 2.

SCEE was awarded the Islamic Development Bank (IDB) prize of excellence in science and technology 2017.

2.6 Consultancy spin-off as a result of UNIX

UNIX has also spin-off to bigger industrial collaboration after the spin-off either in the form of R&D grants or consultancy projects as listed in Table 4.

CompanyConsultancy projectsOutcomes
Greentech MalaysiaBaseline study of Energy efficiency and renewable energy award in MalaysiaA full report with extensive literature review and stakeholder analysis for energy efficiency and renewable energy award in Malaysia
Pantai Medivest Sdn BhdImprovement of Heat Recovery System and Fuel Switching for Pantai Medivest Sdn Bhd (PMSB) Incinerator PlantThe savings for the heat recovery system and fuel switching results in savings of RM 983, 386/year for fuel oil and RM63,612/year for electricity. The total investment is RM141, 000 with a payback period of less than two months.
Padi Beras Nasional BerhadDesign of cogeneration system for rice millThe proposed cogen scheme manages to satisfy the total drying heat requirement as well as the boiler turndown ratio constraint while generating a maximum of 582 kW power and making full use of the limited available rice husk quantity of an average 2.3 ton/hr. The total annual power saving for this scheme is RM 547,485, and yearly diesel savings is RM 3,312,276. The project payback period is 3.34 years.
Greentech MalaysiaDevelopment of a Hazard & Operability Studies (HAZOP) for Biomass-Based Power Generation System for Palm Oil MillsA 3 days training module for Biomass-Based Power Generation System HAZOP for Palm Oil Mills
Greentech MalaysiaDevelopment of UTM-GTM Energy Audit Software for Malaysian Industries and BuildingsAn energy audit software that consists of macro (e.g. fuel switching, cogen) and technical level (e.g. motor, fan, chiller, compressor) analysis for current equipment/system benchmarking.
IOI GroupsRetrofit for Energy Efficiency ImprovementA detailed study that includes benchmarking, data validation and sampling, hydraulic analysis, heat integration, system troubleshooting. The cooling water pump has successfully been reduced to two from three.
MIMOS SemiconductorUTM-MIMOS Water Minimisation ProjectSavings of freshwater and wastewater bills worth RM 50 k per month with two years payback period. This is a reduction of more than 80% of freshwater consumption.

Table 4.

Consultancy projects from UNIX.

2.7 Companies’ responses

Below are some sample feedbacks from the UNIX-Internship Invitations:

Response from Petlin (PETRONAS):

----------------------------------

Dear Prof. Zainuddin,

Unfortunately, this year (2011), our student quota is pretty occupied. As per email below, we are interested with the sandwich course as below, especially now that we are embarking Energy Loss Management System (ELMS). Good to study back our energy and mass balance throughout the plant (after eight years running). Maybe to study the water balance as well. This also will benefit the student and PM Sdn Bhd very much.

2012 then? When usually the best month to start the planning? Please advise. Will put it in my calendar. So when the month comes, will trigger the need for communication and will directly communicate with you.

Regards,

Process Safety Technical Department

PM Sdn. Bhd.

Response from Indah Water Konsortium:

-----------------------------------

Dear Prof Zainuddin,

Yes, we accept students for their industrial training subject to review and acceptance by the relevant department in IW Sdn Bhd. For this, we would advise that a written letter applying for the industrial training is submitted to our Human Resource Department. The letter shall include the details of the student, discipline, faculty, etc.; training dates and duration; the name of UTM coordinator and his/her details. Should there be any preferred area for the training (e.g. Engineering Design, Environmental Management, R&D, Planning, etc.), please state it in the letter. Our HR Department will reply accordingly. Kindly ensure adequate notice period is given for IW to process the application and reply accordingly. Thanks.

Regards, Manager

Response from PL Sdn Bhd

-----------------------------------

Dear Dr. Sharifah Rafidah,

I had received a good response from my boss. He is very interested with F2C program, especially for Chemistry or Polymer majors. If you do not mind, can I arrange you to do a presentation of the F2C program at our workplace.

Here is the tentative date:

Date: 30/12/2010 or 31/12/2010

Venue: PL Sdn Bhd

Time: Please advise us.

Enclosed here is the map to our plant. Your reply is highly appreciated.

Thanks.

| Human Resource Assistant | Human Resource

| PL Sdn Bhd

3. Examples of impactful UNIX programs to contribute toward sustainable organisation

UNIX has resulted in impactful outcomes for companies driving toward a sustainable organisation. Below are some examples:

3.1 Middle distillate company

A PhD student was attached in a middle distillate company in Sarawak, East Malaysia. The company requested a study on their existing heat integration system and proposed possible measures to further improve their thermal energy recovery systems, reduce emissions and minimise utility costs. The student performed a comprehensive ‘Pinch Analysis’ study for the company and proposed heat recovery retrofit measures. The study has helped the company improved its heat integration network and resulted in a reduction in 1.6 MW of energy, with annual savings of USD4.1Million. The study has also contributed to a more sustainable energy system for the company.

The student received the Vice-Chancellor Award during the 55th UTM Convocation Ceremony. In addition, he was also selected as the National Young Scientist Representative during the 65th Lindau Nobel Laureate Meeting 2015 (see Figure 3). He was also chosen as the top 3 finalists for the European Federation of Chemical Engineer (EFCE) Excellence Award in Recognition of an Outstanding PhD Thesis on Computer-Aided Process Engineering (CAPE).

Figure 3.

Liew Peng yen selected as National Young Scientist Representative during the 65th Lindau Nobel laureate meeting 2015. The picture was taken with Steven Chu, former United States secretary of energy. He is the winner of the 1997 Nobel prize in physics.

The work also resulted in software called Optimal Site which won the Jury and Gold Award in the 16th Industrial Art and Technology Exhibition (INATEX), UTM and Silver Medal in the 14th International Conference and Exposition on Inventions by Institutions of Higher Learning (PECIPTA).

3.2 MIMOS semiconductor Sdn Bhd

Another PhD student was attached in MIMOS Semiconductor. She performed a feasibility study on water sustainability programs for MIMOS. The study predicted savings of freshwater and wastewater bills of worth Ringgit Malaysia (RM) 50 k per month with two years payback period. The savings represent a reduction of more than 80% of freshwater consumption. The water minimisation strategies holistically included measures for water elimination, reduction, reuse, outsourcing and treatment. The work produced a UTM commercial software, Optimal Water, that won several national and international product innovation awards, and resulted in joint collaborative international publications involving UTM and MIMOS. The work also won prestigious international awards such as the Saudi Prince Sultan bin Abdul Aziz International Prize for Water 2008 (Water Management Category), the Germany Green Talent Award (see Figure 4) [13] and the Malaysia’s Sarawak State 2008 Maal Hijrah Outstanding Achievement Award.

Figure 4.

Sharifah rafidah Wan Alwi (front row, second from left) was selected as one of the green talents 2009 by the government of Germany.

3.3 Synthomer

One undergraduate and one postgraduate student were attached in Synthomer Malaysia under the UNIX program. The undergraduate student developed software to monitor the cooling duty and scheduling of reactor for polymerisation reaction (see Figure 5). The software has helped the company to reduce its reactor downtime, minimise cooling requirement and optimise production.

Figure 5.

Output of UNIX - software for cooling duty monitoring & reactor scheduling of semi-batch free radical emulsion polymerisation.

The master student was assigned to develop a sustainable energy management system and performed an energy audit for the company. The feasibility study conducted by the student managed to identify scope for annual energy savings of up to RM740,000 and recommended a sustainable energy management program for the company. UTM collaboration with Synthomer has also resulted in a memorandum of understanding (MOU) [14] that provided placement for more students to undertake various other UNIX projects.

4. Conclusion

Over the years, more than 100 public and private institutions had benefited from UNIX collaboration with UTM. Having access to UTM’s R&I ecosystem, network, resources, technology, and know-how allow collaborators to add value, improve efficiency, raise competitiveness, and drive innovation that ultimately enhances the image, profitability and sustainability of their businesses. The UTM-Industry Innovation Exchange Internship Program (UNIX-Internship) transformed a routine university’s conventional short exposure industrial training programs into a 1-year, value-laden, industry-oriented, project-based internship programs. It has huge potential to be a game-changer to the teaching and learning ecosystem in the following major ways:

  • Sharpening of student’s generic skills, including lifelong learning, problem-solving, communication, teamworking, and leadership skills, while positively impacting the cognitive and affective domains of learning among students.

  • Providing students with vital practical industrial experiences of project execution and management and the skill to solve complex problems encompassing sustainable development, safety-health-environment, economic analysis & project management.

  • Providing students with better career prospects through prolonged exposure and experience working and engaging with the industry.

  • Providing affordable R & D support to companies toward the development of sustainable organisations. To date, UNIX has benefitted more than 100 local and multinational companies.

  • Forming a vibrant, synergistic, and sustainable linkage between UTM and stakeholders (SDG17 – Partnerships for the Goals).

  • Creating a culture and an ecosystem of market-driven R & D among the young students.

The works particularly provide impactful contributions toward advancing Quality education (SDG Goal #4) and Partnership for the Goals (SDG Goal #17) of the Sustainable Development Goals. The numerous UNIX projects with industries, among others, also address other specific SDG goals related to energy and water sustainability and climate action, industry innovation and sustainable consumption and production.

Apart from successfully benefitting more than 100 organisations, the UNIX project-based industrial internship program has enhanced UTM graduate employability. In addition, UNIX has formed a vibrant, synergistic and sustainable linkage between UTM and stakeholders, and created a culture and an ecosystem of market-driven R & D for universities.

Acknowledgments

The authors acknowledge the contributions of the academic and industrial supervisors and appreciate the facilities and resources provided by all the companies involved in the UNIX program.

Conflict of interest

The authors declare no conflict of interest in this written chapter.

Download for free

chapter PDF

© 2020 The Author(s). Licensee IntechOpen. This chapter is distributed under the terms of the Creative Commons Attribution 3.0 License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to cite and reference

Link to this chapter Copy to clipboard

Cite this chapter Copy to clipboard

Zainuddin Abd Manan and Sharifah Rafidah Wan Alwi (November 28th 2020). Driving a Sustainable University-Industry Partnership [Online First], IntechOpen, DOI: 10.5772/intechopen.94990. Available from:

chapter statistics

53total chapter downloads

More statistics for editors and authors

Login to your personal dashboard for more detailed statistics on your publications.

Access personal reporting

We are IntechOpen, the world's leading publisher of Open Access books. Built by scientists, for scientists. Our readership spans scientists, professors, researchers, librarians, and students, as well as business professionals. We share our knowledge and peer-reveiwed research papers with libraries, scientific and engineering societies, and also work with corporate R&D departments and government entities.

More About Us