Fungal Deterioration of Cultural Heritage Objects

Significant percent of world cultural heritage artifacts is threatened by fungal infestation. Fungi can deteriorate different substrates via various physical and chemical mechanisms. Hyphal growth and penetration into the substrate can cause symptoms like discoloration, biopitting, cracking, exfoliation and patina formation. On the other hand, chemical mechanisms include acid secretion, release of extracellular enzymes, pigment production, oxidation/reduction reactions and secondary mycogenic minerals formation. These processes can lead to serious, both esthetic and structural, alterations which may be irreversible and could permanently impair artworks. Proper isolation and identification of autochthonous isolates, as well as employment of different microscopic techniques and in vitro biodegradation tests are pivotal in understanding complex biodeterioration mechanisms caused by microorganisms, including fungal deteriogens. Biodeterioration and biodegradation studies require multidisciplinary approach and close collaboration of microbiolo-gists, chemists, geologists and different personnel responsible for the safeguarding of cultural heritage monuments and artifacts, especially restorers and conservators.


Introduction
Ars longa, vita brevis -states the ancient Roman proverb, emphasizing that human need for artistic expression is as old as the civilization itself. Unfortunately, extant artworks are only a fragment of humanity's creations throughout history. Along with artistic creation, there is a need for protection of the artwork from external, frequently damaging influences. Since works of art are an essential part of the cultural heritage legacy of every nation, they ought to be protected for future generations. Biodeterioration is defined as any undesired alteration of the property of the material which is caused by living organisms and cultural heritage objects are frequently prone to this process [1]. Mentioned alterations can be induced by both macroorganisms (plants and animals) and microorganisms (bacteria, algae and fungi). Inadequate storage and irregular maintenance of artifacts in archives, museums and depots oftentimes favorize microbial, especially fungal, proliferation [2]. Since fungi are ubiquitous organisms, with pronounced metabolic activities, they or damage the colonized substrate. Since hyphae have high surface to volume ratio, these metabolites can quickly diffuse between the cells as well as from the cell into the substrate [7,8]. Nowadays, various microbiological, biochemical and petrographical tests are employed to study chemical biodeterioration. In vitro tests provide rapid, cost effective estimation of fungal degradation capacity, which helps in evaluating a potential risk to cultural heritage artifacts [3].
Acid production and acidolysis are the most studied biodeterioration mechanisms, particularly on inorganic materials [8,12]. Due to their metabolic activities, fungi produce organic acids such as gluconic, citric, oxalic, malic, succinic, itaconic etc. [13]. Once the spore germination occurs, organic acids are produced by respiration in mitochondria as intermendiary products of the citric acid cycle. If the fungi grow on nutrient enriched substrates, these acids are formed in excess and excreted as secondary metabolites [6]. The secreted acids then react with different substances via cation solubilization and chelation reactions. The reaction of acids with different metals (i.e. K, Fe and Mn) results in the formation of organic salts and complex compounds [7]. It should be mentioned that many organic acids, especially the oxalic, are able to chelate different metals in the process called complexolysis. The oxalic acid is able to form complexes with diverse metals (Ca, Mg, Fe, Cu and others), consequently leading to secondary mycogenic minerals formation, calcium oxalate being the most well-known [14]. The aforementioned crystals are present in patinas on stone, frescoes, oil paintings, glass, wood and other materials [8]. It is ascertained that most of the fungi have the ability, in greater or lesser extent, to produce oxalic acid, and subsequently precipitate oxalates [3]. Furthermore, CO 2 , as a product of respiration, in the conditions of increased humidity is transformed into carbonic acid, which then solubilizes calcium carbonate and magnesium carbonate present in limestone, mortar and gypsum. As a result, water soluble bicarbonates are formed. Additionally, increased H + concentration favorizes the colonization of acidofilic fungi, which further facilitates the biodeterioration process [7,8].
Enzymes. Fungi are able to digest organic matter, altering and weakening those materials, by the action of extracellular hydrolytic enzymes, such as lignocellulases, proteases, lipases, pectinases, chitinases, etc. [15,16]. Enzymes that convert large, complex and often water-insoluble compounds (cellulose, hemicellulose, lignin, proteins and lipids) into low-molecular-weight soluble compounds, play an important role in the biodeterioration and biodegradation processes [7]. Although filamentous fungi primarily use simple sugars as a carbon source, they can be producers of lignocellulolytic enzymes to depolymerize wood or cellulose material for nutritional purposes [17]. Cellulolytic enzyme complex, which is responsible for degradation of cellulose to glucose monomers, comprises of: endoglucanase (hydrolyzes β-1,4-glycosidic bonds within cellulose fibers), exoglucanase (hydrolyzes β-glycosidic bonds and remove cellobiose units from the free ends of chains) and β-glucosidase (hydrolyzes cellobiose and cellodextrin to glucose) [18,19]. Hemicellulases hydrolyze hemicellulose, which is made up of hexoses (mannose, glucose, galactose) and pentoses (xylose, arabinose) to monomeric sugars and acetic acid. The complex of enzymes that hydrolyze hemicellulose consists of at least eight enzymes: endo-1,4-β-D xylanase, exo-1,4-β-D xylocuronidase, α-L arabinofuranosidase, endo-1,4-β-D mananase, β-mannosidase, acetyl-acid esterase, α-glucuronidase and α-galactosidase [19]. Lignin degradation, characteristic for white-rot fungi, is catalyzed by nonspecific polyphenol oxidases: manganese oxidizing peroxidases, lignin peroxidases, and laccase. This process involves breaking inter-monomer bonds, demethylation, hydroxylation, side chain modification, and aromatic ring cleavage [20,21]. Some fungal species inhabit art objects that are substrates rich in fibrillar proteins (wool, parchment, leather, silk, etc.). Proteolytic enzymes (proteases) degrade various protein fibers such as collagen (wool), fibroin (silk) and keratin (parchment) [11]. Lipases catalyze the hydrolysis of triacylglycerols to glycerol and fatty acids. These enzymes might take part in the degradation of widely used painting constituents, linseed and shellac, derived primarily from unsaturated oleic, linoleic and linolenic acids [22]. Pigment production. Micromycetes produce pigments which vary in chemical composition and color and are species specific [7,8]. They are present in hyphae, conidia, or are secreted into the substrate whilst their production is determined by the availability of nutrients and minerals, UV radiation, pH, temperature and other environmental factors [6]. Pigment secretion on/into the substrate leads to the appearance of different, frequently irreversible, colorations leading to the observable changes on cultural heritage objects. This diminishes the aesthetic value of the artwork and accelerates biodeterioration process [7,11,23]. Many fungi produce dark colored pigments -melanins, which are responsible for characteristic brownish color of mycelia and reproductive structures. These water insoluble, very stable and resistant, molecules are formed by oxidative polymerization of phenolic compounds (ortho-dihydroxy phenols) [24]. Dark colored melanins are characteristic for dematiaceous fungi (representatives of the former family Deamtiaceae) and are present in cell walls in both granular of amorphic form, while their amount increases with aging [6,25]. On the other hand, the secretion of various water soluble exopigments into the substrate can also cause different aesthetic damage to artworks, especially on those made from organic materials. A vast number of different pigments are identified and grouped in three main families: the derivatives of toluquinone, of naphthoquinone and of beta-methyl-quinone [8].

Stone artifacts
A significant percentage of world cultural heritage objects is represented by stone artworks, such as architectural monuments, statues and tombstones, to name just a few [26]. Stone is considered an extreme environment for microbial growth and proliferation, mostly due to the intensive oscillations of diurnal and seasonal microclimatic parameters and low nutrient and water content [27]. Stone surfaces directly exposed to sunlight could achieve temperatures above 60°C, while being simultaneously susceptible to freezing-thawing cycles [28,29]. Regardless, certain groups of microorganisms, the so called lithobionts, are able to colonize such environments. Primary colonizers are photoautothrophic organisms -cyanobacteria, algae and lichens, while hemolithotrophic and hemoorganotrophic bacteria and fungi are considered secondary. The latter are oligotrophic or poikilotrophic organisms which adapted to survive and grow in harsh or variable environmental conditions [29].
Microbial dwellers of stone surfaces frequently form biofilm, highly structurised microbial consortium embedded in a mutual extracellular matrix. Biofilm formation starts with unspecific, reversible interactions, followed by stable interactions which are initiated as a consequence of the formation of specific molecules and structures (lipopolysaccharides, membrane proteins, flagellae). After initial adhesion, extracellular polymeric substances are produced and excreted, enhancing the adhesion and cohesion of cells [8]. Evolutionary advantages of biofilm are to provide protection, resistance to physical and chemical stressors, metabolic cooperation and mutually regulated gene expression [30]. All groups of microbial dwellers of stone are characterized with a high phenotypic plasticity, which is reflected in polymorphism -the change of growth or sporulation forms with regard to external conditions. Therefore, micromycetes, which colonize this environment, are able to form different somatic and reproductive structures -sclerotia, chlamidospores, conidial clusters, perithecia and pycnidia [29,31]. Moreover, stone interior is a specific microenvironment for the growth of certain microorganisms such are endolithic fungi. The microclimatic conditions in this environment are a little more favorable -water retention is higher and solar radiation and air current intensities are lower [27].
Among fungal colonizers of stone, micorcolonial fungi constitute a specific ecological group characterized by its slow growth and formation of irregular shaped cells, often packed in aggregates. They rarely form specialized reproductive structures and in turn, by active growth, form thick, pigmented cell walls which enable transition to the state of dormancy during prolonged, unfavorable environmental conditions. The ability to secrete extracellular polymeric substances and thick cell walls, enable water retention, nutrient absorption, desiccation reduction and cellular adhesion/cohesion. These organisms are able to survive for long periods without metabolic activities and their metabolic rates are low even during optimal environmental conditions [27].
Fungi can deteriorate stone via physical and chemical mechanisms. Physical mechanisms include hyphal penetration of the rock surface which causes its fragmentation, while chemical ones include secretion of acidic metabolites and pigments and oxidation of mineral forming cations. Although many microorganisms are able to produce acids, fungi are considered as the most potent ones in nature that degrade rocks and minerals. The production of various acidic metabolites leads to the biocorrosion -dissolution of the mineral substrate, resulting in the formation of various secondary mycogenic minerals [26]. In vitro acid production and formation of calcium oxalate and calcium carbonate minerals have been reported by autochthonous isolates from limestone monuments such as ancient Roman stela and Portuguese king tomb [26,33]. Synthesis and excretion of extracellular pigments mostly affect the stone aesthetically, although studies concerning pigment production on stone monuments are generally scarce [26]. Due to the mentioned processes, symptoms such as biopitting, biogenic patina and colorations can occur [11]. The growth of dematiaceous fungi results in the presence of dark stains while microcolonial fungi are the main culprits of biopitting phenomena on limestone and marble artworks, [32,34]. Sanctuary of Delos in Greece is an example of mentioned biopitting phenomena [35].
Lichenized fungi are important colonizers of stone substrates. These organisms have a high tolerance to variations of environmental factors, especially temperature, insolation and water availability, which is responsible for their cosmopolitan distribution and ability to colonize extreme environments [36]. These organisms are poikilohydric, i.e. they are capable of enduring cycles of desiccation and rehydration due to their ability of lowering their metabolic rate and enter cryptobiosis under conditions of low water availability [37]. Endolithic lichens are of special importance to stone deterioration, since they are capable of the deepest penetration into the stone compared to other microorganisms [38]. Apart from the fact that hyphae of the mycobiont can penetrate the rock surface ( Figure 1E and F), perithecia formation by some endolithic species can penetrate the surface from the inside out, which leads to biopitting [27]. Additionally, lichen growth could cause exfoliations, encrustations and disaggregation of the stone surface [11,39]. Conversely, lichen morphology and its adhesive capability aren't always in correlation with its capacity to alter the substrate and physiological differences between the species are considered to be more significant [40,41]. In fact, synthesis of different chemical deterioration agents is done by the mycobiont. Apart from carboxylic, lichens have the ability to produce lichen acids, semisoluble polyphenolic compounds which are able to form complexes with metal cations. The capability of lichens to absorb and maintain water enhances the duration of chemical reactions and therefore facilitates deterioration process [39,41]. Lastly, some authors have reported the presence of orange-brownish patinas (scialbatura) on stone monuments made from limestone and marble. These colorations mainly consist of calcium carbonate and calcium oxalate minerals, sometimes intermixed with fragmented lichen thalli [42,43]. Although this symptom is associated with deterioration, it is hypothesized that it may have a protective role to the monuments [27].

Wall paintings
Wall painting, as the pictorial technique, encompasses all painting techniques aimed at beautifying wall surfaces. There is no universally accepted definition of fresco, as well as consensus on what techniques can be included in this type of wall painting, however, the term al fresco generally refers to paintings made on a fresh lime mortar with mineral pigments mixed with water [44]. On the contrary, in fresco a secco or al secco technique painting is done on a dry plaster with paints prepared by mixing mineral pigments with various organic binders [32,45]. Although hallmarked as an extreme type of habitat, painted layer and lime mortar are also considered to be very suitable and bioreceptive substrates for fungal growth. This is due to the mineral composition and porous nature of lime mortar, and the fact that organic and inorganic components of the painted layer represent a suitable niche for the development of a wide range of heterotrophic microorganisms [46].
Fungal infestation of wall paintings can occur from several sources including contaminated indoor air as the main, but also soil and plants of immediate vicinity, visitors, contaminated conservation tools, and indoor hotspots as secondary sources [7]. Whether a certain fungus will be able to colonize the painted layer or mortar depends on the ecological and physiological requirements of a given species. If the requirements are met the process is further controlled by three main factors: nutrient availability, relative humidity, and temperature [32]. The origin of nutrients in fresco painting is related to (1) additives (chaff, wheat paste, barley flakes, animal hair, hemp and flax fibers, egg whites, oils, fats) mixed with mineral and complex fillers of chopped straw and lime mortar; (2) additives used in the preparation of mortar (liquid resins, tar, polymer latex, emulsions, bitumen, milk, olive and linseed oil, lard, animal blood); (3) binders of plant and animal origin mixed with mineral pigments; (4) casein, paraloid mixtures, fixatives and consolidants based on polymer components (cellulose acetates, polyvinyl acetate, polymethyl acrylate, etc.) used in restoration works [32,45,[47][48][49][50]. These organic components determine the richness of the fresco mycobiota. Since the composition of the painted layer and mortar is predominated by inorganic components, its mycobiota differs greatly from the fungal communities established on other painted works of art [45]. Furthermore, heterogeneously pigmented zones of the painted layer can be considered as selective substrates that condition the development of a specific mycobiota [51]. Using culture-dependent methods, the most commonly documented fungi on painted layer and mortar of wall paintings are Ascomycota of genera Acremonium, Alternaria, Arthrinium, Aspergillus, Aureobasidium, Beauveria, Botrytis, Chaetomium, Chrysosporium, Cladosporium, Curvularia, Dreschlera, Engyodontium, Epicoccum, Eurotium, Exophiala, Fusarium, Geomyces, Gliomastix, Phoma, Penicillium, Scopulariopsis, Sepedonium, Sporotrichum, Stachybotrys, Stemphylium, Trichoderma, Trichotecium, Ulocladium and Verticillium [7,45,[52][53][54]. Contamination by fungi from phyla Basidiomycota is rare (e.g. Coprinus spp.), while Zygomycota of genera Mucor and Rhizopus are isolated frequently but are considered only surface contaminants [45,55].
Species of the genera Aspergillus, Aureobasidium, Alternaria, Cladosporium and Penicillium, are frequently listed as the most common wall paintings contaminants, as well as the primary fresco deterioration agents in temperate climates [56]. Many Cladosporium species are recognized as the main biological agents in the process of biodeterioration of wall paintings since they are able to not only induce brown discolorations, but also penetrate through the entire painted layer all the way to the mortar support [57] (Figure 1C and D). Many species of the genus Penicillium are known to develop and intensely sporulate in a period of only few days to a few weeks on periodically moist fresco paintings [58]. Furthermore, in addition to dominant members of fungal community, species from less represented genera can also significantly contribute to the damage of wall paintings. For example, isolation of Phoma species from the surface of painted layer indicates that given wall paintings are in an active process of decay [59]. Chaetomium, Aureobasidium and Epicoccum species, due to strong proteolytic activity, degrade protein binders of the painted layer, which results in the lifting and separation of the painted layer from the support. Likewise, it has been recently contemplated that species of the genera Mucor and Rhizopus might be more involved in process of biodeterioration of wall paintings than originally considered, as it was shown in in vitro experiments that they are able to degrade protein binders and epoxy resins [60].
Mechanical (1) and chemical (2) activity of fungi directly results in damages to structural and esthetic integrity of fresco paintings. (1) Hyphal penetration, together with formation of fruiting bodies and various modifications of mycelium, increases internal pressure thereby forming new cracks in the painted layer and mortar, as well as expanding the existing ones. Damages caused by mechanical activity are considered by some to be of greater importance compared to changes induced by environmental factors and fungal chemical activity [61]. Furthermore, aside from mechanical activity, damages as the result of change in substrate properties can also incur due to utilizing fresco components as a source of nutrients for fungal growth (2′1) and/or due to secretion and interaction of fungal metabolites with organic and inorganic components of the painted layer and mortar (2′2) [7,62]. (2′1) Extracellular enzymes break down complex organic components into simpler molecules enabling their absorption and easier penetration of hyphae into the substrate which results in cracking and peeling of the painted layer and mortar. The main enzymes involved in this process are β-glucosidase, phosphatase, lipase, arylsulfatase, esterase, protease and endo-N-acetyl-PD-glucosamidase [63,64]. (2′2) Excreted organic acids chelate metal ions present in mineral pigments and mortar, resulting in the formation of mineral salts and complex compounds that increase pressure in pores, which leads to cracking, peeling, and loss of fragments of the painted layer and mortar [65,66]. Additionally, salts stimulate formation of surface irregularities that serve as suitable sites for the settlement of heterotrophic microorganisms, thereby increasing the bioreceptivity of fresco painting [67]. In these circumstances, there is an uncontrolled biofilm development and acceleration of chemical dissimilation activity through oxidation, reduction and transformation of metal ions in pigments, primarily Fe and Mn, but also As, Pb, Cu, Zn and Hg, resulting in the alterations to the original color of the painted layer [53,68]. Aside from organic acids, very stable and persistent fungal pigments (melanins, mycosporins, quinones, hydroxyanthraquinones and carotenoids) secreted onto the surface induce changes in the original coloration, which is process that depends on the chemical composition of the pigment, environmental conditions and interactions with substrate components [7,32].

Canvas oil paintings
One of the best-known pictorial technique today, oil painting on canvas, emerged in the Middle Ages and has since been one of the most important art expressions, constituting outstanding works of art with important historic and cultural value [69]. Structurally speaking, these works of art are composed of the pictorial layer between the protective covering varnish and the ground (or preparatory layer) spread on a linen canvas. Compared to the other forms of artwork, oil paintings on canvas possibly provide the widest range of microhabitats and nutrients that may be exploited by a large variety of microbial species [70]. Materials that constitute the painting, i.e. the cellulose of the canvas support, organic adhesives (i.e. various animal, fish and plant glues) used in sizing the support, natural varnishes, and the oils used in binding the pigments (linseed, turpentine and other oils) are all composed of organic molecules of high nutritional content that are all easily degraded [32,63]. These organic molecules encompass sugars, gums, and other polysaccharides, proteins and waxes, but also less chemically defined mixtures of biomolecules, such as egg yolk, bile, and urine, as well [45]. Organic glue pastes used to coat the back of paintings with linen canvas, i.e. "re-lining", may also represent a rich nutrient source [71]. Furthermore, dirt, dust and other environmental contaminants (volatile hydrocarbons released from machinery, respiration and cigarette smoke) deposited on the surface of the oil paintings provide nutrients as well [63].
Given the wide range of organic molecules that are present in oil paintings, many different microorganisms may grow provided inadequate storage and favorable environmental conditions, primarily high relative humidity and temperature, are met [45]. These specific environmental conditions may start and/or accelerate the microbial growth, which otherwise would persist on the obverse and the reverse side of the painting in a dormant metabolic state [70]. Among multitudes of different microorganisms, fungi are notorious for their ability to inhabit and decay paintings due to their enormous metabolic activity and ability to grow at low a w values [32]. However, to the best of our knowledge, despite being one of the most numerous objects exhibited and stored in museums and warehouses worldwide, relatively fewer number of studies to date have been engaged in describing the fungal communities dwelling on canvas oil paintings compared to the other forms of art. Using culture-dependent methods, the most commonly documented fungi on painted surface, canvas and wooden frame are Ascomycota of genera Alternaria, Aspergillus, Aureobasidium, Botrytis, Cladosporium, Drechslera, Epicoccum, Fusarium, Penicillium, Ulocladium, Scopulariopsis, Stemphylium, Trichoderma and Wardomyces, with occasional observations of teleomorphs from Chaetomium, Emericella and Eurotium genera [32,63,69,70,72,73]. Review of the above referenced literature data has highlighted fungi that were most frequently isolated from the infested oil paintings: Alternaria alternata, Aspergillus flavus, A. niger, A. versicolor, Aureobasidium pullulans, Chaetomium globosum, Cladosporium cladosporioides, Eurotium chevalieri, and Penicillium chrysogenum. Aside from the Ascomycota, the only other documented species are Zygomycota of Cunninghamella, Mucor and Rhizopus genera, but they are in most cases regarded as transients only, i.e. part of the surface dust deposits, and not partaking in the complex process of biodeterioration [32,74]. Air mycobiota of the depots and exhibition rooms, where paintings are stored and exhibited, respectively, was shown to correlate well with fungal communities observed on the surface of the paintings indicating airborne origin of the infestations. Furthermore, higher density and diversity of the fungal communities on the obverse of the painting is a direct result of the higher amount of airborne fungal propagules deposited on the painted surface due to gravitational settling of propagules from the air [22]. It has to be noted, however, that there are discrepancies between results of the studies utilizing culture-dependent and -independent methods. Results of the limited number of studies on non-culturable fraction of the oil paintings fungal communities showed discrepancies in numbers, with unculturable or not viable part of the community being more dense and prevalent, as well as in composition: Ascomycota of genera  75,76].
Fungal induced deterioration of canvas oil paintings can occur on both the obverse and the reverse side. It usually starts on the reverse side as canvas components are more readily degraded than those found on the obverse side. In addition, support polymers and the glue sizing in the canvas act as supplementary substrates for fungal growth [22]. Canvas was shown to be one of the most susceptible painting materials (only surpassed by linseed oil), with the susceptibility depending on the percentage content of cellulose, lignin, and other organic components [74,77]. The higher the percentage of cellulose and lignin, the more resistant it will be to fungal attack [78]. Due to their ability to produce cellulolytic enzymes responsible for cellulose fibers dissolution, fungi of the genus Alternaria, Aspergillus, Cladosporium and Ulocladium are considered to be the main agents of canvas deterioration [63, 69,76].
On the other hand, the degree of deterioration on the obverse side depends on the oil paints and their mode of application. Varnish, added to provide protection against environmental attacks, is the least susceptible painting material to fungal attack, while many pigments are known to possess antifungal properties [74]. Fungal communities are found to be less dense and diverse in pictorial layers containing pigments with heavy metals (e.g. Pb, Cu and Hg), compared to those found in pictorial layers without such compounds [75]. On the obverse side, hydrolytic activities that the fungi undertake to sustain growth results in the detachment of the paint layer from the support, with further increase in the loss of material happening due to excretion of destructive metabolites, i.e. organic or inorganic acids and the additional production of extracellular enzymes: lipases, esterases, endo-N-acetyl-glucosaminidases and proteases [22]. Such activities lead to formation of structural impairments usually manifested as exfoliation of paint layers, cracking, peeling, formation of paint blisters, detachment of the paint layer from the support, deformations and loss of strength of support. Strongly linked to these damages are the esthetic impairments (preceding the structural damages or forming as a resulting consequence) manifesting as the change of the original coloration due to pigment alterations, biofilm formation on the painted surface or staining as the result of pigment excretion by fungi [75]. Fungi of Aspergillus and Penicillium genera degrade glues and oil binders, and dissolve paints, contributing Fungal Deterioration of Cultural Heritage Objects DOI: http://dx.doi.org /10.5772/intechopen.98620 to chromatic alterations of the painted surfaces and detachment of the support, while Aureobasidium pullulans is considered by many to be the main biological agent of paint deterioration [1,45,69].

Wood and paper
Wood as a material has been widely used as a structural element for many types of constructions or for ritual, religious and decorative purpose. Historically, human usage of wood is embedded in wood cultural heritage reflecting past and present human life, culture, ideals, symbols and values. Wood cultural heritage objects can be classified as: moveable (musical instruments, frames, furniture, sculptures, iconic altar etc.), immovable (temples, churches, chapels, royal palaces, pagodas, wooden bridges etc.) and underwater (shipwrecks, foundation piles, wooden cargo or contents which were partially or totally underwater, periodically or continuously for at least 100 years), according to UNESCO [79]. Lignocellulose is the major component of wood biomass and consists of three types of polymers, cellulose (40-55%), hemicelluloses (24-40%) and lignin (18-35%) that are strongly intermeshed and chemically bonded by non-covalent bonds and by covalent crosslinkages [19]. Organic nature and optimal water content make the wooden substrate suitable for microbial attack [80]. However, microbial deterioration of these materials occurs only under poor conservation conditions: high humidity level, soil contact, poor ventilation, and rare maintenance [81]. Even though deterioration of wood cultural heritage is a process conducted by all groups of microorganisms, fungi have the most significant potential to affect this type of historic artworks [82]. Biodegradation and biodeterioration of wood materials is predominantly dependent on its moisture content, requiring a minimum of 20% of water. Despite dry wooden objects are considered to be resistant to fungal degradation due to low moisture content, occasional wetting, leaks and flooding can increase humidity, enabling conditions for fungal growth. The mechanism of biodeterioration implies the development of fungi on the surface (Figure 1G and H) or between internal structures, the production of extracellular enzymes, the structural change of basic biopolymers, which ultimately results in visible changes of the object [81]. Generally, fungi that attack wooden material can be distinguished as white-rot, brown-rot and soft rot fungi. White rot fungi are the only organisms that can completely depolymerize and degrade all lignin components as well as cellulose and hemicellulose. The largest number, of about 1500 species, belongs to the Basidiomycota and a smaller number belongs to Ascomycota. Most commonly found species are from genera Bjerkandera, Donkioporia, Fomes, Irpex, Phanerochaete, Pholiota, Pleurotus and Trametes. Brown rot fungi decompose cellulose and hemicellulose while lignin degradation is limited to the process of demethylation of methoxyl groups, partial oxidation and depolymerization in a non-enzymatic catalytic cycle of the Fenton type where the free radical reaction is initiated by hydroxyl radicals (OH•). Only 6% of the total number of species that have been confirmed to be able to decompose wood mass belong to this group, and almost all representatives inhabit coniferous wood (species from the genera Antrodia, Aspergillus, Coniophora, Coriolellus, Fusarium, Gloeophyllum, Merulis, Paxillus, Poria, Postia, Serpula, etc.). Soft rot fungi decompose cellulose and hemicellulose, while the process of lignin modification is limited to demethylation. It is typical for this group of fungi to attack wood mass with high levels of humidity and low lignin content, forming a microscopic cavities inside the wood, sometimes leading to discoloration and occurrence of cracking pattern similar to brown rot (species from the genera Alternaria, Chaetomium, Daldinia, Humicola, Stemphylium, Xylaria, etc.) [79,82,83]. Soft-rot decay has been described frequently from construction timbers, ancient Egyptian wooden coffins, wooden structures of Buddhist temples, waterlogged archeological wooden material, which can be related to more tolerant growth conditions. In comparison to soft-rot species, other two groups of wood decay fungi have a relatively narrow spectrum of growth conditions (preferring moisture content between 35% and 50%) but were documented in wooden churches, historic timbers and various historic buildings [79]. Objects of wood cultural heritage in the outdoors have been more disposed to deterioration process than those in the indoor as they are exposed to the relative humidity of 70% or higher, which is stimulatory for fungal growth. Additionally, the physical contact with moisture-absorbing surface can also provoke fungal decay [79]. On the other hand, fungal degradation of waterlogged and buried wood is much slower than for that found in dry environment, but once excavated decay can occur rapidly [82]. Finally, it should also be emphasized that in some cases fungal decay can be observed in extreme conditions such as in wood with 17.4% of moisture content [79].
Additionally, paper, which is mostly produced by mechanical and chemical processing of cellulose fibers, originating from wood, is the most important material on which cultural achievements in the whole world are recorded and preserved. Since it is created as a product of the wood industry and consists of 90-99% of cellulose fibers, in the ecological sense, paper is considered to be a cellulose substrate. Books, documents, writings, old maps, photographs, etc. are objects made of paper that are most often kept in libraries, archives and museums. Apart from paper, cotton and linen are fabrics which main components are cellulose fibers. Also, paraments, defined as hangings or ornaments used for decorations of Christian churches' interiors are often tailored of cotton and linen. In that sense, it should be emphasized that, art objects made of cellulose fibers can be colonized by cellulolytic fungi. These fungi can degrade cellulose fibers via process off cellulolysis, defined as an enzymatic hydrolysis of cellulose polymer into glucose units. In that sense, the fungi capable for production of cellulolytic enzymes are frequently isolated from paper, especially from old books or documents kept in libraries, archives and museum depots. Among the frequently encountered species on the paper substrates are the members of genera Chaetomium, Penicillium, Aspergillus, Eurotium, and Trichoderma [84,85]. Some authors reported the presence of Fusarium sp., Humicola sp., Paecilomyces variotti and Trichoderma viride on deteriorated art photographs which were part of the collection of the Museum of Contemporary Art (Belgrade, Serbia) [86]. Due to their ability to degrade cellulose fibers, these fungi are referred to soft rot fungi [87]. Ascospores and conidia of different cellulolytic microfungi ubiquitously present in the environment worldwide could easily be deposited on papers and other cellulolytic materials (books), and when optimal conditions are met, they could germinate, elongate and proliferate and consequently lead to fast book decay. Also, fungi can deteriorate the paper-based materials mechanically via hyphal penetration or through production and excretion of pigments and organic acids [88]. A specific and irreversible phenomenon in the form of brown to red spots on paper material has been described in the literature [89]. Since the color of these spots resembles the color of fox fur, the phenomenon is called "foxing". The origin of this phenomenon on paper documents is explained by two theories -abiotic and biotic. According to the abiotic theory, "foxing" is a consequence of natural chemical processes, most often oxidation, which takes place on paper material, as well as a consequence of the deposition of certain compounds on the paper surface [90]. According to the biotic theory, "foxing" is caused by microorganisms, especially fungi that produce organic acids which deteriorate the paper, permanently damaging it [89]. Isolation of a large number of fungal species from the parts of the paper on which the symptoms of "foxing" are observed, speaks in favor of biotic theory. The famous piece of art affected with foxing symptoms is self-portrait of Leonardo da Vinci's drawn in red chalk on paper and deposited in Royal Library in Turin. As a main culprit responsible for "foxing" spots on this famous piece of art, certain authors reported the fungus Eurotium halophilicum, which spores are documented near the foxing spots via SEM analyses, along with oxalates of fungal origin [91]. Additionally, they pointed out that tonophilic fungi can germinate on paper materials and also can metabolize organic acids, oligosaccharides and proteins, which react chemically with the material at a low water activity, forming brown products and, via oxidative reactions, leading to foxing spots.

Textile
Textile is defined as elastic material produced by spinning of natural or synthetic raw fibers and which are in final form composed of interlocked network of threads or yarns. Apart from synthetic fibers, materials used for textile production could be of plant or animal origin. Cotton, linen, hemp and jute are widely used fabrics of plant origin and hence they are composed of cellulose fibers. Many old-fashioned and vintage attires and garments, worn by our ancestors were woven from these fabrics and deposited in museum depots and exhibition rooms, or still worn during traditional festivities. In that sense, those fibers could be easily attacked by cellulolytic fungi, and mechanisms of biodeterioration are similar to those of the fungi capable of degrading paper-based materials. On the other hand, animal fibers include wool and silk [92]. Wool is a textile fiber obtained from various hairy mammals, but mostly from sheep, and main constituent of wool is a protein keratin. When compared with textile fibers of plant origin, wool is more resistant to fungal attack due to its specific cross-linked structure with disulphide bonds [93]. However, fungi capable for keratinolysis can attack wool fibers and cause wool degradation. Pioneer research by some authors demonstrated that fungi are the main "culprits" responsible for wool degradation, in much higher degree then bacteria, and members of genera Aspergillus, Chaetomium, Fusarium, Microsporum, Penicillium, Rhizopus and Trichophyton are among the most frequent wool colonizers [94]. In an in vitro study, other investigators showed that fungi do not grow directly on the wool fibers but rather between the fibers, and reported that proteolytic fungi Cladosporium cladosporioides and Penicillium corylophilum have the most intensive growth when inoculated on wool and also the highest impact on degradation and aging of wool fibers [93]. Although wool is very resilient to microbial attack, the silk is considered to be a natural fiber most resistant to the biodeterioration [92]. Silks are defined as fibrous proteins spun into fibers through activity of spiders and insects. The main producer of commercial silk is a domestic silkworm Bombyx mori. Chemically, raw silks are composed of highly crystalline polypeptide fibers, fibroin, linked to one another by a gum-like protein, sericin [95]. The amino acid composition of silk polypeptides results in a very stable β-pleated crystal structure, making fibroin totally insoluble in aqueous solvents and hence very resistant to enzymatic hydrolysis [96]. In that sense, scientific reports regarding the microbial deterioration of silk material are scarce. Still, some authors reported for the first time the mechanical deterioration of Japanese silk from Serbian museum collections caused by proteolytic fungus Chaetomium globosum. Scanning electron microscopy analysis of the analyzed scroll indicated that C. globosum hyphae are capable of the mechanical deterioration of silk, causing cracks and gaps in fibroin fibers and consequently lead to visible impairment of silk artifact itself (Figure 1A and B) [97].

Conclusion
Specific morphology and physiology of fungi enables them to colonize multifarious substrates, including cultural heritage artifacts. Due to their pronounced metabolic capacity, fungal deteriogens are able to significantly influence both aesthetical appearance and integrity of monuments, sculptures, murals, paintings, textile and documentary heritage. Nowadays, conversance of fungal biology is becoming crucial in proper assessment of contamination and colonization of artworks but also in their adequate storage and protection. Since mycology as a science gains more and more application in the conservation and restauration procedures, the investigations in this scientific filed become essential in cultural heritage safeguard.
© 2021 The Author(s). Licensee IntechOpen. This chapter is distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/ by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.