Magnetite Molybdenum Disulphide Nanofluid of Grade Two: A Generalized Model with Caputo-Fabrizio Derivative Magnetite Molybdenum Disulphide Nanofluid of Grade Two: A Generalized Model with Caputo-Fabrizio Derivative

Heat and mass transfer analysis in magnetite molybdenum disulphide nanofluid of grade two is studied. MoS 2 powder with each particle of nanosize is dissolved in engine oil chosen as base fluid. A generalized form of grade-two model is considered with fractional order derivatives of Caputo and Fabrizio. The fluid over vertically oscillating plate is subjected to isothermal temperate and species concentration. The problem is modeled in terms of partial differential equations with sufficient initial conditions and boundary conditions. Fractional form of Laplace transform is used and exact solutions in closed form are determined for velocity field, temperature and concentration distributions. These solutions are then plotted for embedded parameters and discussed. Results for the phys- ical quantities of interest (skin friction coefficient, Nusselt number and Sherwood number) are computed in tables. Results obtained in this work are compared with some published results from the open literature.


Introduction
The idea of fractional order calculus is as old as traditional order calculus. The pioneering systematic studies are devoted to Riemann-Liouville and Leibniz [1]. The subject is growing day by day and its applications have been utilized in different fields, for example, viscoelasticity, bioengineering, biophysics and mechatronics [2]. The applications of non-integer order calculus have also been encountered in different areas of science despite mathematics and physics drastically [3][4][5]. In fluid dynamics, the fractional order calculus has been broadly used to describe the viscoelastic behaviour of the material. Viscoelasticity of a material is defined it deforms evince both viscous and elastic behaviour via storage of mechanical energy and simultaneous behaviour. Mainardi [6] examined the connections among fractional calculus, wave motion and viscoelasticity. It is increasingly seen as an efficient tool through which useful generalization of physical concepts can be obtained. Hayat et al. [7] studied the periodic unidirectional flows of a viscoelastic fluid with the Maxwell model (fractional). Qi and Jin [8] analyzed the unsteady rotating flows of viscoelastic fluid with the fractional Maxwell model between coaxial cylinders. Many other researchers used the idea of fractional calculus and published quite number of research papers in some reputable journals [9][10][11].
Several versions of fractional derivatives are now available in the literature; however, the widely used derivatives are the Riemann-Liouville fractional derivatives and Caputo/fractional derivative [12,13]. However, the researchers were facing quite number of difficulties in using them. For example, the Riemann-Liouville derivative of a constant is not zero and the Laplace transform of Riemann-Liouville derivative contains terms without physical significance. Though the Caputo fractional derivative has eliminated the short fall of Riemann-Liouville derivative, its kernal has singularity point. Ali et al. [14] reported the conjugate effect of heat and mass transfer on time fraction convective flow of Brinkman type fluid using the Caputo approach. Shahid et al. [15] investigated the approach of Caputo fractional derivatives to study the magnetohyrodynamic (MHD) flow past over an oscillating vertical plate along with heat and mass transfer. Recently, Caputo and Fabrizio (CF) have initiated a fractional derivative with no singular kernel [16]. However, Shah and Khan [17] analyzed that heat transfer analysis in a grade-two fluid over an oscillating vertical plate by using CF derivatives. Ali et al. [18] studied the application of CF derivative to MHD free convection flow of generalized Walter's-B fluid model. Recently, Sheikh et al. [19] applied CF derivatives to MHD flow of a regular second-grade fluid together with radiative heat transfer.
However, the idea of fractional calculus is very new in nanoscience, particularly in nanofluid also called smart fluid [20]. In this study, we have applied the fractional calculus idea more exactly, the idea of CF derivatives to a subclass of differential type fluid known as the secondgrade fluid with suspended nanoparticles in spherical shape of molybdenum disulphide (MoS 2 ). Generally, the purpose of nanoparticles when dropped in regular fluid/base fluid/host fluid is to enhance the thermal conductivity of the host fluid. The inclusion of nanomaterial not only increases the thermal conductivity but also increases the base fluid viscosity (Wu et al. [21], Wang et al. [22], Garg et al. [23] and Lee et al. [24]). For this purpose, several types of nanomaterials, such as carbides, oxides and iron, and so on, are available in the market with their specific usage/characteristics and applications. For example, nanomaterial can be used as a nanolubricants, friction reductant, anti-wear agent and additive to tribological performance.
Oxides, such as copper CuO 2 ð Þ and titanium oxides TiO 2 ð Þ, can be used as an additive to lubricants. The combustion of fossil fuels produces injurious gases (CO and NO) that cause air pollution and global warming. To save natural recourses and produce environment-friendly products, currently, nanomaterials are used to enhance the fuel efficiency of the oils [25].
Among the different types of nanomaterial, there is one called molybdenum disulphide nanomaterial MoS 2 , used very rarely in nanofluid studies. Although MoS 2 nanoparticles are not focused more, they have several interesting and useful applications. Applications of molybdenum disulphide can be seen in MoS 2 -based lubricants such as two-stroke engines, for example, motorcycle engines, automotive CV and universal joints, bicycle coaster brakes, bullets and ski waxes [26]. Moreover, the MoS 2 has a very high boiling point and many researchers have investigated it as a lubricant The first theoretical study on MoS 2 -based nanofluid was performed by Shafie et al. [27], where they studied the shape effect of MoS 2 nanoparticles of four different shapes (platelet, cylinder, brick and blade) in convective flow of fluid in a channel filled with saturated porous medium.
By keeping in mind the importance of MoS 2 nanoparticles, this chapter studies the joint analysis of heat and mass transfer in magnetite molybdenum disulphide viscoelastic nanofluid of grade two. The concept of fractional calculus has been used in formulating the generalized model of grade-two fluid. MoS 2 nanoparticles of spherical shapes have been used in engine oil chosen as base fluid. The problem is formulated in fractional form and Laplace transform together. CF derivatives have been used for finding the exact solution of the problem. Results are obtained in tabular and graphical forms and discussed for rheological parameters.

Solution of the problem
Let us consider heat and mass transfer analysis in magnetite molybdenum disulphide nanofluid of grade two with viscosity and elasticity effects. MoS 2 nanoparticles in powder form of spherical shape are dissolved in engine oil chosen as base fluid. MoS 2 nanofluid is taken over an infinite plate placed in xy-plane. The plate is chosen in vertical direction along x-axis, and y-axis is transverse to the plate. Electrically conducting fluid in the presence of uniform magnetic B 0 is considered which is taken normal to the flow direction. Magnetic Reynolds number is chosen very small so that induced magnetic field can be neglected. Before the time start, both the fluid and plate are stationary with ambient temperature T ∞ and ambient concentration C ∞ . At time t = 0 + , both the plate and fluid starts to oscillate in its own direction with constant amplitude U and frequency ω. Schematic diagram is shown in Figure 1.
Under these assumptions, the problem is governed by the following system of differential equations: where are the density, electrical conductivity, viscosity, thermal expansion coefficient, coefficient of concentration, thermal conductivity, heat capacity and mass diffusivity of nanofluid. α 1 shows second two parameters, and g denotes acceleration due to gravity.
The appropriate initial and boundary conditions are For nanofluids, the expressions for ρ nf , μ nf , ρβ nf , ρc p À Á nf are given by: where ϕ describes the volume fraction of nanoparticles. The subscripts s and f stands for solid nanoparticles and base fluid, respectively. The numerical values of physical properties of nanoparticle and base fluid are mentioned in Table 1. where where Re is the Reynolds number, β ¼ α1U 2 ρ f ν 2 is the non-dimensional second-grade parameter, shows the Hartmann number (magnetic parameter), Gr ¼ gνβ Tf

Exact solution
In order to develop the generalized second-grade nanofluid model, we replace the partial derivative with respect to τ by CF fractional operator of order α , and Eqs. (5)- (7) can be written as where D α τ (.) is known as Caputo-Fabrizio time fractional operator and is defined as: Applying Laplace transform to Eqs. (9)-(11) and using the corresponding initial conditions from Eq. (8), we have: Boundary conditions are transformed to: Upon solving Eqs. (13)-(15) and using the boundary conditions from Eqs. (16)-(18), we get: Eqs. (19) and (20) are written in simplified form where Now, inverse Laplace transform of Eqs. (21), (23) and (24) is: Velocity field for regular grade-two fluid without mass transfer.
For Gm ¼ ϕ ¼ 0 in Eq. (22) reduce to the following form: which is quite identical to the solution of Sheikh et al. [19] for 1 k ¼ R ¼ 0.

Graphical discussion
A fractional model for the outflow of the second-grade fluid with nanoparticles over an isothermal vertical plate is studied. The coupled partial differential equations with Caputo-Fabrizio time-fractional derivatives are solved analytically via Laplace transform method. Furthermore, the influence of different embedded parameters such as α, ϕ, β, M, t Gr, Gm and Sc is shown graphically.   obvious that the boundary layer thickness of second-grade fluid velocity is greater as compared to boundary layer thickness of Newtonian fluid. More clearly, the velocity of secondgrade fluid is smaller than Newtonian fluid. Figure 3 shows the influence of ϕ on the flow. It was found that the velocity of fluid decreases with the increase in ϕ due to the increase in viscosity. Because by increasing volume fraction, the fluid becomes more viscous, which leads to a decrease in the fluid velocity.   when Sc value increases. The effect of Schmidt number on velocity is identical to that of the magnetic parameter. The influence of phase angle ωτ on the velocity profile is shown in Figure 8.
The velocity is showing fluctuating behaviour.
In order to show the effect of α, τ and ϕ on the temperature profile in Figure 9, it is found that temperature increasing with increasing value of ϕ: Figure 10 shows the effect of α and τ on temperature profile. This figure shows the effect of α on the temperature profile for two different values of τ: For smaller value of τ τ ¼ 0:2 ð Þ , classical temperature is less than fractional temperature, and for larger value, when τ ¼ 2, then the graph shows opposite behaviour. Figure 11 shows the comparison of present solution with published result of Sheikh et al. [19]. It is noted that in the absence of porosity and radiation, the present result is similar to those obtained in [19. See Figure 9], which shows the validity of our obtained results.
Variations in skin friction, Nusselt number and Sherwood number are shown in Tables 2-4. The effect of β, α, Gr, Gm, M, Sc, ϕ, ωτ and τ on the skin friction is studied in Table 2. It is found that skin friction increases when there is an increase in α, Gr, Gm, M, Sc, ωτ and τ:but it is noticed that for increasing value of β and ϕ, skin friction decreases. It is due to the fact that when ϕ increases, it gives rise to lubricancy of the oil. Table 3 represents the effect of α, ϕ and τ on Nusselt number. As values of α, ϕ and τ increase, Nusselt number decreases. From Table 4, it is clear that when Sc increases, Sherwood number increases, and an increase in τ decreases Sherwood number.

Conclusion remarks
Unsteady MHD flow of generalized second-grade fluid along with nanoparticles has been analyzed. The exact solution has been obtained for velocity, temperature and concentration profile via the Laplace transform technique. The effects of various physical parameters are studied in various plots and tables with the following conclusions:     Magnetite Molybdenum Disulphide Nanofluid of Grade Two: A Generalized Model with Caputo-Fabrizio Derivative http://dx.doi.org/10.5772/intechopen.72863 Figure 11. Comparison of this study with Sheikh et al. [19], when 1 k ¼ R ¼ 0.  • With increase in volume friction ϕ of nanofluid, lubricancy of the fluid increases.
• An increase in second-grade parameter β leads to a decrease in fluid velocity.
• The velocity profile shows different behaviour for fractional parameter for different values of time.
• In limited cases, the obtained solutions reduced to the solution of Sheikh et al. [19].