Microbial Bioremediation of Petroleum Hydrocarbon– Contaminated Marine Environments

Petroleum pollution has become a serious environmental problem, which can cause harmful damage to the environment and human health. This pollutant is introduced into the environment from both natural and anthropogenic sources. Various physicochemical and biological treatments were developed for the cleanup of contaminated environments. However, bioremediation is based on the metabolic capabilities of microorganisms, and it is considered as the most basic and reliable way to eliminate contaminants, particularly petroleum and its recalcitrant compounds. It is more effective alternative comparing to classical remediation techniques. A high diversity of potential hydrocarbon degrader’s microorganisms was reported, and bacteria constitute the most abundant group, which has been well studied for hydrocarbon degradation. Several bioremediation approaches through bioaugmentation or/and biostimulation have been successfully applied. The interest on the optimizing of different parameters to achieve successful bioremediation technologies has been increased. In this chapter, we summarize the diversity and the hydrocarbon degradation potential of microorganism involved in the remediation of contaminated environments. We also present an overview of the efficient bioremediation strategies used for the decontamination of polluted marine environments.


Introduction
Oil is a primary and necessary energy source, which is widely used in different fields, including industry, transport and daily human activities [1]. However, the widespread distribution and the overexploitation of hydrocarbons become a serious problem causing harmful impacts on the environment and health due to their toxicity and their carcinogenic and mutagenic properties [2]. Hydrocarbon pollution may occur through several sources that may be natural or anthropogenic. We can distinguish numerous anthropogenic sources such as oil extraction and treatment field, transportation fuels accidents, leakage from underground storage tanks, petrochemical industry activities and release from oil refinery sites [3][4][5]. To reduce this contamination, different chemical, physical and biological treatment methods are considered. The choice of remediation methods depends on several parameters such as the type of pollutant and its characteristics (the physicochemical nature of the pollutant and its toxicity), the properties of contaminated site (the pollution source, the nature of the site) and the type of the pollution (old or recent). The treatment of a polluted site is carried out only after evaluating the type of pollutant, the environmental and human-associated risks and the treatment feasibility and predicted efficiency.
Depending on its location, we distinguish in situ and ex situ contaminated site remediation methods [6][7][8][9]. However, bioremediation is considered as one of the best environmentfriendly way to remove hydrocarbons presenting several advantages compared to other methods [9][10][11]. In fact it is a natural, efficient and economic method. Moreover, it converts hydrocarbon onto less toxic compound through metabolic and enzymatic reactions [10,12]. The biodegradation is mainly carried out by bacteria, yeast and fungi. Bacteria represent the major class of microorganisms involved in the degradation of hydrocarbons [2,13]. There are two approaches for bioremediation: bioaugmentation and biostimulation [14][15][16]. Bioaugmentation consists in the addition of highly efficient oil-degrading bacteria to improve and enhance the degradation. While biostimulation consists in the modification of the environment conditions in order to stimulate indigenous bacteria activity.
The aim of this chapter is to provide an overview on the diversity of hydrocarbonoclastic bacteria and their hydrocarbon degradation potential as well as an update on the different bioremediation strategies adopted for the treatment of polluted marine environments particularly the Mediterranean basin. The mechanism by which hydrocarbonoclastic bacteria degrade hydrocarbons will also be discussed.

Hydrocarbon pollution in the Mediterranean Sea
The Mediterranean Sea is highly exposed to hydrocarbon pollution due to its geographical situation taking into account the location of most oil-producing and oil-consuming countries, placed, respectively, on the Southern and Northern sides of the basin [17]. It is an enclosed basin and is a very strategic maritime route that hosts about 20% of the global oil tanker traffic, and its coasts host about 80 petroleum harbors. Every year approximately 150,000 tons of hydrocarbons are transported in the Mediterranean Sea [18,19].
The Mediterranean Sea is highly exposed to several sources of hydrocarbon pollution particularly linked to maritime traffic as well as extraction and refinery activities can affect human health and disturb ecological balance. Moreover, this pollution seriously threatens the marine life [20]. A very high microbial diversity was detected and estimated at 17,000 different species in the Mediterranean Sea constituting a habitat and a reservoir for novel microorganisms [20].
The Regional Marine Pollution Emergency Response Centre for the Mediterranean Sea (REMPEC) was established in 1989. It aims the protection of areas and biological diversity in the Mediterranean Sea against pollution by oil and other harmful substances. According to the REMPEC database on alerts and accidents in the Mediterranean Sea, a high number of marine accidents that caused pollution of the Mediterranean Sea by oil were recorded since 1977. It is estimated at 659 accidents (Figure 1) that have led to the spillage of approximately 310,000 tons of oil since 1977 and at least 120,000 tons of hazardous and noxious substances since 1988 [21].

Different classes of hydrocarbons
Crude oil is an extremely complex mixture of tens of thousands of hydrocarbons (aliphatics and aromatics) and nonhydrocarbons (containing sulfur, nitrogen, oxygen and various trace metals). The composition of oil varies depending on their origin. Moreover, in the same source, we can also observe a time-dependent variation. For that reason, it is difficult to give a detailed composition of oil [22].
In general, the different compounds of crude oil can be classified into three groups as described in Figure 2.

Aliphatic hydrocarbons
Aliphatic hydrocarbons are composed of hydrogen and carbon, which can be linear, branched or cyclic. Aliphatic compounds can be saturated or unsaturated. There are several types of aliphatic hydrocarbons, including alkanes, alkenes and alkynes. Alkanes are the most abundant constituents in crude oil and are the first component to be degraded.  The most dangerous consequences of acute hydrocarbon ingestion likely arise from aspiration and result in pneumonitis [26]. Moreover, PAHs are well described for their toxic, mutagenic and/or carcinogenic properties [27][28][29]. Sixteen PAHs were identified by the US Environmental Protection Agency and the European Union as priority pollutant, and seven PAHs are regarded as carcinogens [30].
The American Association of Poison Control Centers Toxic Exposure Surveillance System studied 318,939 exposures to benzene, toluene/xylene, halogenated hydrocarbons, kerosene and lamp oil [31]. They demonstrated that hydrocarbons absorbed systemically and characterized by a low viscosity-induced higher hazard factors [31].

Hydrocarbon toxicity toward microorganisms
Considering the fact that hydrocarbon bioremediation is an important route for their environmental decontamination, these pollutants should not exert a toxic effect on the microbial community. However, several hydrocarbons and especially cyclic ones are known to be toxic to microbial cells. This toxicity is directly correlated to their partition coefficient between octanol and water (logP). The lipophilic compound accumulates into the lipid bilayers enhancing their availability to the cells. Due to hydrocarbon accumulation, the membrane loses its integrity and its permeability to protons and ions [32]. Due to those disturbances, dissipation of the proton motive force and impairment of intracellular pH homeostasis occur [32]. In order to overcome this toxicity and be able to degrade hydrocarbons, microbial strains should use a tolerance strategy toward those compounds. Sikkema and coworkers reported some adaptation mechanisms [32]. Microorganisms are thus able to increase structuring of the bilayer by changing the fatty acid conformation from cis to trans or by saturation of the fatty acid acyl chains. Another adaptation mechanism consists of the enhancement of the cross-linking degree between constituents of the cell wall and modifications of the cell wall hydrophobicity.

Hydrocarbon bioremediation: bioaugmentation, biostimulation and landfarming
Due to their high environmental and health-associated hazards, several physical and chemical hydrocarbon treatment methods have been investigated such as incineration, chlorination, UV oxidation and solvent extraction [24]. However, most of these approaches are associated to several drawbacks in terms of ecological impact and of removal efficiency.
In the meanwhile, the biological approach revealed to be of great interest for hydrocarbon removal. Several approaches were reported. We mainly distinguish (a) phytoremediation strategy that uses plants for decontamination purposes and (b) bioremediation that involves the use of microbial population for the cleanup of contaminated sites.
Bioremediation is considered as a tool for the decontamination of hydrocarbon polluted sites and as an extremely effective approach associated to eco-friendly features and relatively low cost. It is also considered as a safe approach. It is based on the catabolic activities of microorganisms and their ability to use pollutant as carbon and energy source by transforming it into less or non-toxic compounds.
Different bioremediation strategies are adopted depending on several factors such as site characteristics, type and concentration of pollutants [33]. Bioremediation can either be carried out ex situ or in situ. Ex situ methods involve the physical removal of the contaminated land for treatment process. However, in situ techniques involve treatment of the contaminated material in place [34].
The bioremediation efficiency depends mainly on the microbial structure, the sites to be decontaminated and the environmental conditions. These factors influence the degradation rate and the microbial activity. Moreover, bioremediation efficiency can be enhanced by three complementary approaches: bioaugmentation, biostimulation and landfarming [35].

Bioaugmentation
Bioaugmentation consists in the addition of selected microbial species, harboring specific catabolic abilities, into a contaminated environment. However, this technique involves the application of allochthonous or autochthonous microorganisms. The autochthonous bioaugmentation (ABA) consists on the exclusive introduction of indigenous microorganisms to the sites to be decontaminated [35,36]. As described in Figure 3, the bioaugmentation treatment is detailed, where A is related to the cultivation of bacteria and/or consortium with high biodegradative capability in laboratory; B showed the addition on natural polluted environment; Cs explain the attack of bacteria and/or microbial consortium selected of pollutant (crude oil and/or hydrocarbons) and D showed the development of biodegradative process. The ABA approach consists on the addition of autochthonous microbial isolates or consortia that are adapted to the contaminated environments [37]. Different studies confirmed the efficiency of autochthonous microorganisms in the decontamination of hydrocarbon-polluted sites based on the fact that environmental conditions are suitable for their growth and metabolism [36,38]. They significantly contribute to the biochemical activities in soil. Allochthonous microorganisms are defined as non-indigenous and originated from other site. When they are added into contaminated sites, they cannot easily integrate and adapt to the activities of the indigenous microbial community. Fodelianakis et al. [38] confirmed that bioaugmentation with allochthonous hydrocarbon-degrading bacterial consortia did not enhance the remediation process of hydrocarbon-contaminated sediments. Thus, the application of autochthonous microorganism is more effective [35]. Generally, Bioaugmentation is performed by using mixed consortia ( [39]). Mrozik and Piotrowsk [40] showed the successful bioaugmentation of contaminated sites with a mixture of PAHs (naphthalene, phenanthrene, anthracene, pyrene, dibenzo[a] anthracene, benzo[a]pyrene) using a reconstructed microbial consortium. The addition of Absidia cylindrospora enhance the degradation of polycyclic aromatic hydrocarbons (more than 90% of fluorine was removed) more than of fluorine (a within 288 h) [41].
For a successful bioaugmentation treatment, environmental conditions, selected and indigenous microorganisms should be well controlled and characterized.

Biostimulation
Biostimulation consists in the addition of different substance to polluted environments to stimulate the natural biodegradation by indigenous degrading microorganisms. The biodegradation of hydrocarbons in marine environment is limited by low oxygen and nutriment availability, more specifically nitrogen and phosphorous [42]. The low bioavailability of pollutants is also considered as a limiting factor [42]. The biostimulation increases the growth of indigenous hydrocarbon degraders by the addition of growth-limiting nutrients.
Moreover, the addition of specific substrate promotes and stimulates the degradation of the pollutant [43] (Figure 4). Adams et al. [44] showed the effectiveness of Biostimulation treatment with the addition of organic nutrients in contaminated soil containing more than 38,000 mg/kg TPH, and the result showed 100% removal of 2-3 ringed PAHs within the first treated by landfarming [45]. Landfarming presents various advantages comparing to other treatment technologies. It has low cost, energy consumption and simple to implement. It has been successfully practiced for the remediation of hydrocarbon-contaminated soils [46]. The effectiveness of bioaugmentation in the bioremediation of oil-contaminated sediments, from the Mediterranean Sea, treated ex situ by landfarming was reported [38].

Factors affecting the bioremediation treatment
Various physical and chemical factors affect the rate of hydrocarbon degradation. Among many, we can cite the nature and amount of hydrocarbons, the type of polluted matrix (soil, sediment, water and effluents), the environmental conditions and the microbial community activity.
The environmental factors include the availability of nutrients, the temperature, the water content or humidity, oxygen, the bioavailability of the pollutant and the pH [47][48][49].

Nutrient availability
Inorganic sources such as nitrogen, phosphorus, potassium, hydrogen or oxygen are essential for microbial metabolism and affect the growth and the activity of microorganisms [48], whereas micronutrients, including zinc, manganese, iron, nickel, cobalt, molybdenum, copper and chlorine, are required but at a very low quantity. The ratios of carbon/nitrogen or carbon/phosphorus are considered as a determining factor of biodegradation rates and are high in hydrocarbon-contaminated sites which limit and affect the degradation rate [50].

Recent Insights in Petroleum Science and Engineering
Considerable effort has been devoted to the development of nutrient delivery systems that overcome the washout problems characteristic of open sea and intertidal environments; the use of slow release fertilizers and/or oleophilic nutrients can provide a continuous source of nutrients to polluted environment areas. Slow release fertilizers consist typically of inorganic nutrients in solid form coated with a hydrophobic compound like paraffin or vegetable oil. Successful alternative that overcomes the problem of quick dilution and wash out of watersoluble nutrients containing nitrogen and phosphorus is oleophilic biostimulants. The application of N and P sources in oleophilic form is considered to be the most effective nutrient application method, since oleophilic additives remain dissolved in the oil phase and thus are available at the oil-water or oil-sediment interface where they enhance bacterial growth and metabolism [43,51].

Temperature
Temperature has a considerable effect on the ability of microorganisms to degrade hydrocarbons. At high temperatures, solubility, bioavailability, hydrocarbons distribution and diffusion rate increase, which promote the microbial biodegradation ability and enhance the biodegradation rate. On the other hand, very high temperature decreases oxygen solubility and limits the aerobic microbial biodegradation [52,53].
Beside, Boopathy [34] confirmed that the degradation of pollutant in mesophilic temperatures is better and more efficient than the degradation at very low or high temperatures. However, it was reported that microorganisms are able to metabolize PAHs at extreme temperatures: for example, a high degradation rate of PAHs occurred in seawater at low temperatures (low as 0°C) and at 50°C [54]. Bargiela et al. [55] confirmed the correlation between the relative percentage of genes encoding enzymes participating in the biodegradation and temperature in oil-polluted sites along the coastlines of the Mediterranean Sea. The authors proved that low temperature increases bacterial richness with decreasing catabolic diversity. The relative percentage of gene sequences encoding enzymes for biodegradation ranged from 0.56 to 1.30% in low temperature (<3°C), whereas this number increased with site temperature 5.6-fold higher in the moderately warmer sites (from 13 to 26.5°C) [55].

Oxygen limitations
The initial steps in the catabolism of aliphatic, cyclic and aromatic hydrocarbons by bacteria and fungi involve the oxidation of the substrate by oxygenases for which molecular oxygen is required. Although anaerobic biodegradation has been shown to occur in different ecosystems including marine environments, its ecological significance has been generally considered to be minor and the biodegradation rate is rather low [24]. Conditions of oxygen limitation normally exist in aquatic sediments and soils. Oxygen depletion can occur in the presence of easily utilizable substrates that increase microbial oxygen consumption. In several instances, the concentration of dissolved oxygen can be close to zero leading to practically zero aerobic biodegradation rates. Although oxygen can be successfully delivered (in various forms) to hydrocarbon-contaminated soils and groundwater, enhancing biodegradation rates, this is not the case in marine environments as it is very difficult to implement such technologies in the field. Tilling is essentially the only option in aerating the top layers of contaminated sediments during low tide [34,48]. Thus, oxygen represents a very significant and potentially factor which limit the rate of hydrocarbon degradation.

pH
pH varies less in aquatic environments and most bacteria and fungi capable of degrading hydrocarbon require a neutral pH [52,53]. In general, microbial activity is influenced by extremely low or high pH [53]. According to Bamforth and Singleton [48], 40% of phenanthrene degradation was observed for Burkholderia cocovenenans at pH 5.5. However, the degradation at neutral pH in the same conditions was 80%. Additionally, Leahy and Colwell [53] reported that microbial degradation of naphthalene decreased at pH 5.0 compared to the highest rate of degradation observed at pH 7. Moreover, other reports described the efficiency of some microorganisms, such as Pseudomonas, to degrade hydrocarbon at alkaline pH [48].
A degradation of PAH in acidic contaminated environment (pH 2) by indigenous microorganisms was reported [54]. The adequate pH depends on microorganisms to be used for the bioremediation.

Bioavailability of hydrocarbon
The bioavailability is defined as the rate of substrate mass transfer into the microbial cells. It is considered as one of the most determinant parameters regarding hydrocarbon degradation rate. PAHs are characterized by a low bioavailability due to their low aqueous solubility. That is the reason why they are reported to be resistant to the degradation process and persistent in the environment [24]. Unsuccessful remediation of PAH-contaminated sites was reported due to the low bioavailability of PAHs [24]. It has been reported that bioavailability of hydrocarbon decreases with time [24]. Although the photo-oxidation increased the biodegradation of petroleum hydrocarbon by increasing its bioavailability which promote microbial activities [56]. Hydrocarbon and particularly PAHs become more bioavailable when they are dissolved or evaporated [27]. The bioavailability of pollutant in contaminated environment may be increased by the application of surfactants.

Distribution of hydrocarbon-degrading microorganisms
Oil spill in the marine environment can be highly toxic to the marine microbial communities. However, a part of these communities resist to this type of pollution and are able to metabolize the pollutant.
Several studies have revealed a huge diversity of microorganisms (bacteria, fungi, archaea and algae), which were isolated from contaminated environments and were able to degrade hydrocarbons. Recent research reported that 79 bacterial, 9 cyanobacterial, 103 fungal and 14 algal are able to use hydrocarbons as a sole source of carbon and energy [39]. Moreover, in the marine environment, at least 25 bacterial genera of hydrocarbon degrader were found [57].

Bacteria are the most important and abundant group known for hydrocarbon degradation.
However, there is a class of bacteria that uses exclusively hydrocarbons as substrates and has been characterized as obligate hydrocarbonoclastic bacteria (OHCB) [39,58,59]. This group is present at low or undetectable levels in marine environment before a contamination with hydrocarbon. Hydrocarbon-degrading microorganisms are widely distributed and ubiquitous in marine environment especially after a contamination with hydrocarbons. Their number and activity increase and can represent 100% of the total microbial community. However, they can be found in non-contaminated environment but in very small proportion which can represent 0.1% of the total microbial community [53,60,61].
Based on microbial isolation and cultivation from hydrocarbon-contaminated environment, several microorganisms were isolated and characterized. However, this method can detect only 1-2% of the most dominant microbial species and only a small fraction of those communities are able to be cultivated [62]. In addition, different molecular approaches were used to study the composition and the structure of the bacterial community in different environment such as denaturing gradient gel electrophoresis (DGGE), terminal restriction fragment length polymorphism (T-RFLP), automated ribosomal intergenic spacer analysis (ARISA) and 16SrRNA gene clone libraries [62][63][64].
With recent advances in genomics and sequencing technologies, more techniques based on high throughput sequencing of DNA (next generation sequencing technologies) are improved in metagenomic studies ( Figure 5). These hydrocarbonoclastic bacteria are of great importance since they belong to the key players in oil removal from contaminated marine sites. Among these OHCB, Alcanivorax, Marinobacter, Thallassolituus, Cycloclasticus and Oleispira are the most representative genera and they play a key role in the degradation of hydrocarbons [65]. As described in Figure 6, bacteria, which are able to degrade saturated and polycyclic aromatic hydrocarbons, were presented by red and blue, respectively, whereas the green organism is able to degrade dioxin compounds. The organisms shown in black color in Figure 6 are able to degrade both saturated and PAH.
Among obligate hydrocarbonoclastic bacteria, Alcanivorax borkumensis is ubiquitous in hydrocarbon-polluted marine environment. This strain is able to metabolize linear and branched alkanes, but unable to degrade aromatic hydrocarbons [66,67]. Thallassolituus oleivorans is highly specialized to degrade aliphatic hydrocarbons from C7 to C20 carbons [68]. Also, Oleiphilus and Oleispira are well known in the degradation of aliphatic hydrocarbons [58].
Whereas Cycloclasticus is reported to mineralize various PAHs such as naphthalene, phenanthrene, anthracene, pyrene and fluorene [69]. Marinobacter strains are able to degrade Figure 6. A phylogenetic tree of the distribution of hydrocarbon-degrading bacteria based on 16S rDNA partial sequences for type strains using MEGA 6.06. 16S rRNA sequence accession numbers of the reference type strains are indicated in parentheses. Microorganisms * showed obligate hydrocarbonoclastic bacteria.
hydrocarbon compounds efficiently [70]. Other non-obligate hydrocarbonoclastic bacteria have been described for their abilities to degrade different classes of hydrocarbons and were isolated from oil-contaminated environment. Among this group, able to degrade PAHs, we distinguish Pseudomonas, Marinomonas, Halomonas and Micrococcus. Moreover, Acinetobacter and Sphingomonas are well described in the degradation of aliphatic compounds [58].
Several studies reported that the efficiency of biodegradation ranged from: 6 to 82%, 0.13 to 50% and 0.003 to 100%, respectively, by fungi, soil bacteria and marine bacteria [71].
Since crude oil is a complex mixture of hydrocarbon and individual microorganism is able to degrade only a limited number of crude oil components, several studies reported the efficiency of the degradation of crude oil by a whole consortium. It was defined as mixed cultures of hydrocarbon-degrading microorganism composed either by known hydrocarbon degrader microorganisms or by enrichment of indigenous microbial consortia. Several reports confirmed that the application of a consortium, with a broad enzymatic capacities to degrade a wide range of hydrocarbons, accelerate bioremediation treatment [33,39,44,72]. A reconstructed consortium composed by a mixture of bacteria and fungi was able to achieve a high degradation of petroleum based on their complimentary metabolic potentials to metabolize the different components [72].

Mechanism of hydrocarbon degradation
The trend in biodegradation of petroleum hydrocarbons rate is performed in the following order: n-alkanes > branched alkanes > low molecular weight aromatics > cyclic alkanes. Resin and asphaltenes are the most recalcitrant compounds of the petroleum hydrocarbons [73].
The major fraction of crude oil can be composed by alkanes which constitute more than 50% of crude oil depending on the type and source of oil.
Various aerobic and anaerobic microorganisms possess the metabolic capacity to use alkanes as sole carbon source and energy. Bacteria, fungi and yeasts were reported to degrade alkanes. The degradation of alkane by bacteria has been extensively studied [58]. The biodegradation of saturated hydrocarbons is essentially an aerobic process carried out by bacteria.
Microorganism-degrading alkanes are widely distributed in the environment. The biodegradation of n-alkanes is better known than other classes of saturated hydrocarbons. Alkane hydroxylase is a key enzyme involved in alkane degradation [74].
Methane monooxygenase is involved in the degradation of short-chain length alkanes (C 2 -C 4 ) [74]. The degradation of medium n-alkanes (C 5 -C 17 ) was carried out via cytochrome P450 and monooxygenases including AlkB [73]. For the degradation of long n-alkanes > C 18 , multiple alkane hydroxylases are reported [74].
Alcanivorax spp., initially undetectable in oil-contaminated sea water, were reported to constitute 90% of the whole bacterial community after nutrient addition in biostimulation treatment [39]. The detection of alkB genes, which encode the catalytic activity of alkane hydroxylase allowing the degradation of medium to long chain hydrocarbons, was also reported [74]. This gene was firstly discovered in Pseudomonas putida GPo1. Afterward, it was found in the majority of alkane-degrading bacteria. With advanced researches, 250 alkB gene homologs were reported in hydrocarbonoclastic bacteria [74].

Polycyclic aromatic hydrocarbons (PAHs)
PAHs represent a class of hazardous environmental pollutants that are accumulated in the environment from various origins and mainly from anthropogenic activities. PAHs are present in crude oil but in low concentrations. They are highly toxic and recalcitrant [60,61].
Currently, there are many reports on aerobic catabolism of aromatics compounds and various catabolic pathways were investigated. In general, we distinguish two major strategies for PAHs degradation in the presence and absence of oxygen [74].
Usually, the degradation of PAHs by bacteria involves mono and dioxygenase since the first step is the hydroxylation of the aromatic ring via a dioxygenase which is a complex of enzymes composed by reductase, ferredoxin and terminal oxygenase subunits. Besides, several bacteria degrade PAHs through cytochrome P450 [24].
PAHs can be completely metabolized to carbon dioxide and water due to the presence of oxygen [61,75].
The anaerobic biodegradation of PAHs is a slow process, and a few numbers of preliminary studies have reported the degradation pathways, catabolic genes and enzymes of this degradation. Among PAHs reported for their degradation in anoxic condition, we can cite naphthalene, anthracene, phenanthrene, fluorene, acenaphthene and fluoranthene [74].

Biosurfactant
The bioavailability of contaminants is considered as a major limit for the degradation and bioremediation of contaminated sites. This limit may be recovered by the use of biosurfactant produced by bacteria. Biosurfactant reduces the surface tension and facilitates the contact between microorganism and pollutants. Numerous studies reported the effect of biosurfactants on biodegradation of hydrocarbons and their industrial and commercial potentials [76,77].
Biosurfactants are of great interest since these compounds are widely used in various fields, including industrial applications, agriculture, crude-oil recovery, cosmetics, pharmaceuticals, Recent Insights in Petroleum Science and Engineering detergents, food processing and textile, and in various fields of biomedicine. Therefore, these compounds have advantages compared to chemical surfactant because these molecules are nontoxic, biodegradable and can be used under extreme conditions of temperature, pH and salinity [78][79][80].
Studies dealing with the biotechnological use of biosurfactants have significantly increased within the last years. Nowadays, with the research advance, the use of biosurfactants is being a potential alternative and promising tool for bioremediation.
Acinetobacter, Stenotrophomonas, Pseudomonas, Koccuria and Bacillus, isolated from hydrocarbon-contaminated sites in Tunisia, showed significant biosurfactant production and emulsification activities [2]. Several microorganism genera including Corynebacterium, Rhodococcus, Pseudomonas, Bacillus, Achromobacter and Ochrobactrum were identified as efficient biosurfactant producers (Table 1) [83]. Therefore, these bacteria may constitute potential candidates for bioremediation and can be useful for biotechnological applications. Pseudomonas has been widely studied for their ability to produce biosurfactants with a glycolipid structure. Rhamnolipids are the better characterized biosurfactants and enhanced oil recovery and bioremediation process [84][85][86]. Bacillus subtilis is known for its ability to produce lipopeptide biosurfactant known as surfactin, which is used in commercial application [82,87]. Additionally, the ability of Brevibacillus sp. to produce biosurfactant during phenanthrene degradation and an association between biodegradation and production of biosurfactants was shown [88]. Other report describes the rhamnolipids produced by Burkholderia plantarii and their application in pharmaceutical and industries [89]. According to Bordoloi and Konwar [81], a higher solubilization of pyrene and fluorine due to the addition of biosurfactant was observed. Rhodococcus erythropolis produced Trehalose lipids, biosurfactant which stimulate the solubilization of phenanthrene to facilitate the degradation of this hydrocarbon [90].

Case studies of bioremediation strategies used for the decontamination of polluted marine environments
Numerous and different studies can be carried out, for example, as application of bioremediation processes in the Mediterranean Sea, however, is particularly interesting is the example that can be extracted from the work of Cappello et al. [91], Genovese et al. [65] and Fodelianakis et al. [38].
In the work of Cappello et al. [91] and Genovese et al. [65], a modular system aimed at optimizing the biodegradation process was implemented and tested for the remediation of hydrocarbon-contaminated sediments collected in Messina harbor (Italy). The system was designed to operate directly in the field but retains the advantages of controlled methods that do not impact the surrounding environment. The effects of the addition of air and/or slow-released fertilizer, temperature regulation and the addition of oil sorbents on the efficiency of the system were evaluated. The abundance of the indigenous microbial communities was monitored for 30 days of treatment. Measures of microbial activity, biochemical oxygen demand (BOD), screen of functional genes, quantitative of petroleum hydrocarbon degradation and ecotoxicological bioassays using the organism Corophium orientale were carried out.
The proposed system was designed according to the two needs highlighted by Nikolopoulou and Kalogerakis: (a) the development of low-cost oxygenation systems for aerobic bioremediation of contaminated anoxic sediments and (b) the development of novel biostimulant methods that are nontoxic to the marine environment ( Table 2).
The results showed the effect of the air injection in the development of bacterial biomass with an increase of bacterial population by the DAPI and MPN counts with air insufflations comparing to the control (untreated sediments). The addition of nutrients and the regulation of temperature enhance the degradation rate to achieve a high degradation in the shortest possible time. In the mesocosm system, ~70% of the total oil and linear hydrocarbons were degraded with the development of mesophilic bacteria. Besides, the addition of fertilizers promoted the degradation of crude oil improving the degradation efficiency within the 30 days of the treatment when >90% of n-alkanes (C 15 -C 30 ) and >60% of (alkyl)naphthalenes were degraded.
However, the authors found that biostimulation treatment through nutrient amendment to hydrocarbon-contaminated sediments enhanced the biodegradation activity of the indigenous microbial community and especially hydrocarbonoclastic bacteria such as Alcanivorax, Marinobacter and Cycloclasticus. In fact, sediment toxicity was evaluated by ecotoxicological method using Corophium orientale, an endemic and widespread Mediterranean amphipod, used as an indicator species in toxicity of harbor sediments [94]; a decrease of toxicity in treated sediments was observed (~30%) comparing to untreated system (95%). Thus, the success of the bioremediation treatment was explained by both reduction of the hydrocarbon in sediment and shift of toxicity.
As another example for bioremediation strategy to evaluate the effectiveness of bioaugmentation with allochthonous bacterial consortia in the bioremediation of oil-contaminated sediments collected from a coast adjacent to an oil refinery (Elefsina bay, Greece) treated ex situ by landfarming. For the bioaugmentation treatment, a bacterial consortia composed by hydrocarbonoclastic strains isolated from different oil-contaminated sediments collected from North Africa (Morocco, Tunisia, Egypt) and Red Sea (Jordan) were used. Besides, the

Conclusion
Petroleum hydrocarbons are the most common pollutants in marine environment and the Mediterranean Sea is particularly endangered by hydrocarbon pollution. This pollution generates a great hazard to marine ecosystems. Bioremediation through bioaugmentation or biostimulation constitutes a promising strategy for the cleanup of oil contamination. It was based on the presence of catabolic genes and enzymes, which allow microorganisms to utilize hydrocarbons as carbon and energy source. This chapter presents an overview of different efficient strategies used for the decontamination of polluted marine environments.
There are various factors that affect bioremediation efficiency such as oxygen, pH, temperature and nutrient availability. Thus, it has been confirmed that the combination of autochthonous bioaugmentation and biostimulation constitutes the best and efficient strategy for the decontamination of petroleum-contaminated marine environment. However, further researches are still required to answer multiple questions to develop a successful system for bioremediation.