Hydroxyapatite-Based Materials for Potential Use in Bone Tissue Infections Hydroxyapatite-Based Materials for Potential Use in Bone Tissue Infections

Hydroxyapatite materials, due to their high biocompatibility, play a crucial role in ortho- paedics and bone surgery as alternatives to autologous bone grafts. It was also found that coatings of metallic implants with hydroxyapatite layer improve significantly their osseointegration. Due to its bioactivity, osteoconductivity and non-toxicity, hydroxyapatite is also widely used as a component of hybrid biomaterials. The implantation of “foreign” materials brings one major concern that is the risk of potential bone tissue infections or chronic osteomyelitis. In turn, the main problem concerning bacterial infec- tion treatment is to obtain an adequate, bactericidal drug concentration maintained for a sufficient period of time in the bone tissue. Therefore, recent developments of materials engineering are focused on delivery antibiotics directly into the affected bone. To achieve this goal, hydroxyapatite-based materials are frequently studied as carriers for antibacte- rial drugs. For effective support of antibiotic therapy, the antibacterial activity of certain ions (including silver, zinc or copper) may be applied. In our work, we present recent developments on ceramic materials for bacterial bone infections: hydroxyapatite-based carriers for antibiotics and modifications of hydroxyapatite with antibacterial ions. In this review, state-of-the-art and current applications of such materials are presented and discussed. We want to also present our recent results.


Introduction
Hydroxyapatite (HA) is a material widely used in regenerative medicine, bone and dental surgery, conservative dentistry as well as implantology [1,2]. HA resembles the main inorganic component of mineralized tissues (biological apatite), which in combination with its non-toxic and, most importantly, osseoconductive properties makes it an asset for biomaterial engineering [3]. HA is considered to be the gold standard in bone tissue regeneration. In clinical practice, it is used in the form of powders or granules as filler for bone replacement or for repair of post-resection defects [4,5]. HA is also successfully used as a coating material for metallic implants due to its bioactivity and favourable effects on the osseointegration process [6]. Porous structures may be used as temporary scaffolds for newly formed osseous tissue. In dentistry, HA is a component of dental materials such as dental cements and toothpastes [7]. Moreover, it has further uses in polymer/ceramic bone composite materials, not only as a bioactive material but also as a provider of desirable mechanical properties [8,9]. Current research on HA bioceramics is conducted with a view to achieve two main goals: (1) to improve the biocompatibility of synthetic HA and (2) to provide synthetic HA with additional biological properties. The first goal can be achieved using partial ionic modification of synthetic HA. It should be stressed at this point that biological apatite is not pure hydroxyapatite, it is carbonated hydroxyapatite with a considerably reduced content of calcium and structural hydroxyl groups [10]. It also contains a number of various ions, primarily magnesium (Mg 2+ ), but also sodium (Na + ), potassium (K + ), zinc (Zn 2+ ), manganese (Mn 2+ ), silicate (SiO 4 4− ) and hydrogen phosphate (HPO 4 2− ). The "foreign ions" incorporated into the structure of HA contribute significantly to its properties such as the size of single crystals, agglomeration tendency and solubility.
New biological properties of HA may also lead to its enrichment with additional ions. For example, the introduction of strontium ions (Sr 2+ ) provides HA with antiresorptive properties, as the strontium ions have an inhibiting effect on the activity of osteoclasts, while also stimulating osteoblasts [11]. HA material containing selenites (SeO 3 2− ) may be used in turn in bone tumour therapy [12]. Commercially available apatite material enriched with silicon ions (Actifuse ® ) contributes positively to osteogenesis by promoting the formation of bone and its natural remodelling [13].
Upgrading HA materials may be achieved using physical or chemical binding of drugs. Therefore, recent research on HA bioceramics focused on producing multifunctional materials, which, in addition to being used as scaffolds for growing tissue, could also release drugs directly into the bone in the affected area [14]. The literature describes research on HA as a delivery system for antiresorptive (e.g., bisphosphonates) and anticancer drugs (e.g., doxorubicin and cisplatin), as well as antibiotics mainly against perioperative and intraoperative infections [15][16][17].
This chapter presents so far achievements in the field of HA materials for bone tissue infections (see Figure 1). In addition to antibiotic delivery systems, herein the focus will be put on HA modified by ions with proved antibacterial activity. Further on, opportunities for developing multifunctional HA-based materials for applications related to prevention and treatment of bone infections will be discussed.

Hydroxyapatite-based antibiotic delivery systems
Bone tissue infections are one of the most frequently occurring side effects of bone surgeries. Such a complication may lead to severe bone loss, implant failure or even amputation [14]. Osteomyelitis, periodontitis and spondylodiscitis are important bone tissue infections [18,19]. They are most commonly caused by infectious isolates of G-positive bacteria, such as Staphylococcus aureus and Streptococcus spp.; G-negative bacteria: Salmonella spp., Mycobacterium tuberculosis, Pseudomonas aeruginosa; and fungi: Candida spp. The treatment of bone infections meets several serious clinical problems. Usually, antibiotic therapy involves 3 weeks of oral treatment followed by 3 weeks of intravenous therapy [19]. Bone tissue is poorly vascularized; thus, the antibiotic doses must be high enough to reach prolonged antibacterial concentration at the infected site. This high dosage of antibiotics may cause systemic toxic effects like nephrotoxicity, ototoxicity, hepatotoxicity, allergy or gastrointestinal syndromes [14].
Despite long, high-dose therapies, standard treatments of bone infections are still not effective enough. Due to the problems mentioned above, drug delivery systems targeting bones have been developed. The material frequently chosen as the system matrix is hydroxyapatite (HA).

Vancomycin
Vancomycin (VAN) is used to treat methicillin-resistant Staphylococcus aureus (MRSA) infections in bone. The drug is administered parenterally; however, poor vascularization of bone tissues may cause insufficient local concentration of the antibiotic. Furthermore, severe side effects, such as ototoxicity and nephrotoxicity, are driving investigations into local delivery systems for VAN.
In one study [62], different materials characterized by various pHs were used to incorporate VAN. Namely, the investigations were focused on brushite cement (pH = 2.4), HA cement (pH = 9.4) and apatite xerogel (pH = 7.4). The influence of pH on the antibiotic release mode was analysed. The outcomes of the experiment revealed that pH affected the release kinetics. Despite the fact that the eluent from apatite cement exceeded the minimum inhibitory concentration (MIC), the system based on this material was ineffective against S. aureus. Yang et al. [27] covered metallic implants of bone with a chitosan/vancomycin composite. The composite's components were interconnected with hydrogen bonding. The electrochemical deposition technique was employed to cover the implant with a layer of composite. Next, the additional, external HA layer was placed on the implant. The kinetics of the antibiotic release from both type coatings were then compared. The kinetics showed that chitosan coating resulted in an impressive initial burst of a drug compared with the chitosan/HA composite. It may be concluded that the addition of HA has a significant impact on the prolonged release of the antibiotic.
The antibacterial activity of HA-based VAN-loaded delivery systems is usually examined in vitro. However, some studies involve in vivo tests to investigate the antibacterial effectiveness of fabricated systems. Joosten et al. [61] tested the antibacterial activity of VAN-loaded HA cement in S. aureus-induced chronic osteomyelitis. The infection was induced in the tibia of New Zealand white rabbits. The HA cement was an effective VAN carrier even for the treatment of MRSA.
Lian et al. [31] tested HA/collagen/calcium sulphate composites loaded with VAN also in rabbits. Bone infection was induced in the condyle lateralis femoris. After 12 weeks of implantation, micro-CT graphs have shown an excellent bone reconstruction with implants containing VAN (see Figure 2).
Some commercial materials were also tested for their effectiveness as the matrices of antibiotic drug delivery systems [18, 53,65]. Interesting outcomes were found by Rauschmann et al. [65] who compared PerOssal ® and calcium sulphate (CS) as drug loading matrices. PerOssal ® is a biodegradable composite consisting of nano-sized HA and CS. The pellets synthesized from  both materials were soaked in two antibiotics: VAN and gentamicin. The release of the drugs from the materials was studied. Surprisingly, PerOssal ® demonstrated a higher initial release and a lower release of VAN after approximately 5 days, while in the case of gentamicin, the release mode from the materials exhibited no significant difference.

Gentamicin
Gentamicin (GT) is a broad-spectrum antibiotic from the group of aminoglycosides. It is mainly used in infections involving Gram-negative bacteria (i.e. Pseudomonas and Enterobacter spp.). Due to poor oral absorption, GT is commonly administered by injection. GT is frequently used as a model, antibacterial agent in HA-based drug delivery systems. Guo et al. [57] examined the influence of the HA's porosity on GT's loading. Mesoporous, carbonated HA microspheres exhibited a higher drug loading efficiency of 70-75% more than the conventional HA particles. It is important to note that the hierarchical nanostructure with developed meso-and microporosity allowed for an efficient loading of drug and, at the same time, a slow and sustained release of GT.
The association between porosity and drug loading was also studied by other researchers.
To synthesize porous HA microspheres, the ice-template spray drying (ITSD) technique was applied by Yu et al. [34]. Drug loading efficacy increased with the increase of the porosity of the HA microspheres. Additionally, the transformation of the structure of the pores from cellular and independent ones to three-dimensional interconnected pore networks had a significant impact on the initial burst of the drug.
A hybrid material containing HA and covalently coated, hardly degradable keratin was described in Ref. [66] as an innovative system for GT delivery. The presence of keratin resulted in a greater immobilization of the antibiotic compared with HA/gelatine material. Moreover, the hybrid was non-toxic and stimulated osteoblast proliferation. It is important to note that the sustainable, prolonged GT release provided efficient antibacterial activity for at least 120 days.
Stigter et al. [44] compared the efficacy of the incorporation of different antibiotics into carbonated HA coatings on titanium implants. The outcomes showed that the incorporation rate depends on the chemical structure of the drug. Antibiotics that contained a carboxylic group, such as cefalotin, carbenicillin or cefamandole, were better incorporated than the others. In addition, these drugs exhibited a slower release from HA coatings.
In turn, Ferraz et al. [22] loaded nanohydroxyapatite microspheres with amoxicillin, amoxicillin + clavulanic acid and erythromycin. Two types of microspheres, with varied porosity, were tested. The release profile from both types of microspheres consisted of a fast initial release followed by long-term sustained release. The microspheres with higher porosity and a greater surface area released more antibiotic during the first days. The antibacterial activity was tested against S. aureus and Escherichia coli. The obtained results have shown that the materials exhibited good, long-term antimicrobial activity.
Detailed study focused on HAs with controlled porosity and loaded with three antimicrobial agents (vancomycin, ciprofloxacin and gentamicin) were described in Ref. [48]. It was concluded that the adsorption of antibiotics was significantly higher in microporous HA than in crude dense discs. Moreover, the amount of adsorbed VAN was significantly higher than ciprofloxacin and gentamicin. Exposure to different bacteria species such as S. aureus, Staphylococcus epidermidis and E. coli demonstrated efficient antibacterial activity for all the materials. However, the microporosity of HA disc significantly prolonged the release of antibacterial agents.
A very interesting research was presented by Ghosh et al. [49]. HA cements were prepared with two types of nanohydroxyapatites and loaded with ciprofloxacin or VAN. Self-setting time reactions were controlled using the different weight ratios of the nanohydroxyapatites and had an impact on the release rate of antibiotics. The results have shown that, with modification of cement components, tuneable antibiotic release rates may be obtained. The biological tests presented good biocompatibility and non-toxicity to osteoblastic and osteoclastic cells.
The possibility of efficient fast loading of antibiotics in HA was studied by Brohede et al. [46]. The HA coatings on titanium implants were loaded with tobramycin, gentamicin, amoxicillin or cefalotin via soaking for varying periods of time (15 mins to 24 h). The results of antibacterial tests have shown that even the shortest loading time was sufficient to release enough drug for the next 24 h and inhibit bacterial growth.

Hydroxyapatite materials doped with antibacterial ions
The antibiotic resistance demonstrated by many bacterial species has stimulated attempts to produce new materials with efficient antibacterial properties. It is also important to note that implant-related/bone infections are caused by bacterial adhesion and biofilm formation.
Biofilms are difficult to treat with standard antibiotic therapy. Thus, searching for new antibacterial strategies seems to be justifiable. As was mentioned above, HA doped with functional ions (i.e. Ag + , Zn 2+ , Cu 2+ , SeO 3 2− ) may be applied for perioperative and intraoperative prevention and treatment of bone infections.
The main mechanism of action consists of the inactivation of microbial proteins through interactions with thiol groups (−SH) and the formation of inactive S-Ag bonding. Silver also affects bacterial DNA, precluding its replication. Another mechanism includes increased reactive oxygen species (ROS) production, leading to abnormally high permeability of microbial cells [68].
Silver-substituted HA (Ag-HA) can be obtained using several main synthesis methods, such as wet precipitation (using salts [74] or the neutralization reaction [77]), sol-gel technique [71,78], hydrothermal method [79], electrochemical deposition [80] and magnetron sputtering [73]. Additional treatment includes sintering [81] or microwave assistance [72]. A wide range of silver substitutions have been investigated-from ultra-trace amounts such as 0.04 ppm [79] or 0.002 mole Ag per 1 mole HA [77] up to 10 wt.% [82,83]. To better evaluate the relationship between silver concentration and physicochemical properties and the biological activity of Ag-HA samples, studies usually include a series of samples with various Ag contents.
The antibacterial activity of silver is dose-dependent and increases with higher silver concentrations. However, higher doses of silver increase the risk of severe cytotoxic effects to mammalian cells. HA with 10 wt% of silver was synthesized by Nath et al. [82] via the sintering of mechanically mixed powders at 1200°C. Biocompatibility was confirmed on mouse fibroblast (L929) and human osteosarcoma (MG-63) cells. Rajendran et al. [83] also confirmed >80% viability of NIH3T3 cells cultured on HA with 10 wt% Ag, but even 3 wt% Ag was sufficiently effective against S. aureus. However, Ag-HA nanocomposite coatings on Ti implants with 5 wt% content of metallic Ag exhibited cytotoxic effect on mice osteoblasts, while 2 wt% of Ag was both cytocompatible and inhibited growth of S. aureus [84]. These results are consistent with research by Yan et al. [80], where Ag + -substituted HA coatings with 2.03 wt% of silver exhibited optimal osteogenic and antimicrobial properties. According to Shi et al. [79], the optimal doping concentration of Ag ranges from 0.27 to 2.2 ppm. Lu et al. [85] also emphasized the importance of incorporating an adequate amount of the element to balance antibacterial activity and biocompatibility. Interestingly, heat treatment enhanced biocompatibility without decreasing antimicrobial properties. Another study indicated improved antibacterial activity against S. aureus, K. pneumoniae and C. albicans after thermal treatment at 600 and 1000°C [81].
Lee et al. [86] prepared nanocomposite fibres composed of Ag-doped HA and polyamide 6. Ag + ions were loaded through the ion-exchange mechanism. HA was synthesized in agarose and ethanol medium to obtain the desired properties. Such composites exhibited excellent antimicrobial activity against K. pneumoniae and E. coli while being slightly less effective against S. aureus. Further modification of the antibacterial fibre could extend the application field of Ag-HA, so far predominantly used in hard tissue injuries, to the treatment of skin diseases.
In Ref. [75], HA powders enriched in silver ions were used as coatings on a silicon previously covered with an elastomer, polydimethylsiloxane (PDMS). The antimicrobial activity was measured against E. coli, S. aureus and C. albicans strains. The obtained layers successfully inhibited microbial growth after 24 h of test (see Figure 3). Other polymer-based composites with polyvinyl alcohol [71], polyethylene glycol [78] and chitosan [87] were also examined.
Novel nanoscaffold biomaterials, based on porous HA, polyamide 66, titanium dioxide (TiO 2 ) and various concentrations of Ag + ions, were developed and thoroughly examined by Lu et al. [88]. Therapeutic effects of the biomaterial were tested in vivo on a large cohort of rabbits with osteomyelitis for 12 weeks. The treatment was successful, scaffolds exhibited both antimicrobial and anti-inflammatory effects and, in addition, stimulation of osteogenesis was observed. In vivo silver concentrations following implantation were under toxic levels and no failure of liver or kidney functions occurred.
Titanium discs coated with thermal sprayed Ag-HA (0.5-3.0 wt%) were tested in vitro, revealing a reduced ability of biofilm formation by a methicillin-resistant S. aureus strain. The effect was confirmed in vivo on rats with an MRSA-inoculated 3% Ag-HA disc implanted hypodermic for 7 days. No skin disorder (such as argyria) or wound healing complications were observed [89]. The reduction of viable MRSA by Ag-based coating on tibia implants was also indicated in vivo on rat models [70]. An interesting study by Xie et al. [87] concerned the successful doping of bone morphogenetic protein 2 (BMP-2) into a nanosilver/hydroxyapatite/ chitosan composite, which was then implanted into the femurs of rabbits. Favourable bone formation and antibacterial properties were demonstrated in vivo.
In 2016, the first clinical study was conducted on 20 human patients with total hip arthroplasty, in which a silver oxide (Ag 2 O)-HA implant coating was used. The highest reported silver blood level following the surgery was far below the toxic level. For 1 year after surgery, no significant adverse reactions were observed and the coating prevented postoperative infection [90].
A popular strategy to further improve the properties of Ag-HA is to co-substitute additional ions. The most frequently studied combinations concern the addition of silicate SiO 4 4− ions (to improve osteogenic properties) [91] and strontium (Sr 2+ ) ions (to reduce silver cytotoxicity and boost antibacterial properties) [92]. Recently, Aksakal et al. [93] examined multiple HA substitutions with silver, zirconia and yttria, while Kolmas et al. [94] indicated that co-substitution of Ag-HA with carbonate (CO 3

2−
) ions increased the solubility of samples, thus exhibiting greater antibacterial effect.
Recently, researchers have conducted in-depth investigations into the antibacterial action of zinc-substituted hydroxyapatites (Zn-HA). Samples with various levels of Zn 2+ substitution were synthesized via the most common methods, namely co-precipitation [100,102], ion exchange [99], sol-gel [104] and hydrothermal synthesis [101]. Anwar et al. [98] proposed a novel technique: continuous plastic flow synthesis (CPFS), which enables rapid production of HA nanocrystals with a high surface area. Electrospinning of fibres [96] and synthesis mediated by surfactant addition TritonX-100 [103] were also examined.
Thian et al. [102] proved that the addition of Zn 2+ ions stimulated the bioactivity of HA, since the increased growth of MSC cells, as well as elevated expression of collagen type I and osteocalcin, was observed in case of Zn-HA (1.6 wt% of Zn). Moreover, Tank et al. [103] indicated no significant haemolytic activity of Zn-HA on human blood. Bioactivity in vitro was proved by the ability of Zn-HA to form apatite crystals on samples soaked in simulated body fluid (SBF), which increased as the concentration of Zn raised.
Some research provides a comparison of antimicrobial activity against several pathogens. Radovanović et al. [101] investigated the inhibition of growth of E. coli, S. aureus, P. aeruginosa and C. albicans caused by Zn-HA samples (0.2 and 0.4 mol%) and undoped HA. It was found that sintering the apatites at 1200°C, which led to partial decomposition to more soluble α-TCP, improved antibacterial activity of samples. All tested microorganisms were susceptible to Zn-HA and the degree of reduction increased with higher content of zinc ions.
Slightly different results were reported by Tank et al. [103] who focused on P. aeruginosa, S. flexneri, M. luteus, S. aureus and B. cereus. Zn substitution ranged from 1.3 wt% to 4.8 wt%. S. aureus was the most sensitive strain, even to undoped HA. M. luteus was also highly susceptible to Zn-HA samples, while both B. cereus and S. flexneri exhibited a moderate reduction in the number of colonies. In contrast, Zn-HA samples were ineffective against P. aeruginosa.
Several studies indicated that Zn-HA-based materials could also be suitable for the treatment of oral cavity bacterial infections. Zn-HA was effective in inhibiting the growth of common oral pathogenic strains, namely Aggregatibacter actinomycetemcomitans, Fusobacterium nucleatum and S. mutans [99]. Zn-HA coating on titanium implants demonstrated antibacterial properties against Porphyromonas gingivalis, a major cause of chronic periodontitis [104]. An additional advantage of Zn-HA used as an additive to toothpaste is protection against acid enamel erosion [105].

Copper-substituted hydroxyapatite
The antimicrobial activity of copper is linked to its interaction with bacterial proteins, membranes and nucleic acids. An extensive review of antimicrobial applications of copper in the environment was provided by Vincent et al. [111].
Li et al. [112] synthesized copper-substituted HA (molar rate of Cu 2+ /Ca 2+ up to 0.15) via ion exchange wet chemical reaction. Obtained materials exhibited a high antibacterial effect against E. coli, which increased with the concentration of Cu 2+ ions. Unfortunately, all Cu-HA samples were cytotoxic to human foetal osteoblast (hFOB) cell lines.
Sahithi et al. [113] combined copper-soaked HA with polyethylene glycol 400 (PEG 400) to further extend its antimicrobial activity. Cu-HA exhibited antibacterial activity against E. coli and S. aureus, the effect of which increased against S. aureus after combination with PEG 400. MTT assay carried out on rat primary osteoprogenitor cells indicated cytocompatibility of the samples.
Antimicrobial activity of Cu-HA as well as Cu-FA (copper-substituted fluorapatite) was tested against E. coli, S. aureus and C. albicans [114]. The increase of copper substitution in hydroxyapatite enhanced activity against S. aureus and C. albicans, but Cu-HAs were not active enough against E. coli. Cu-FA was effective against all tested microorganisms with increasing activity in the following order: C. albicans < S. aureus < E. coli. Cu-FA may be more effective due to the release of fluoride ions. The same pathogen strains were used in Ref. [115], where the antibacterial activity of Cu-HA was compared with results for Zn-HA.
Radovanović et al. [116] compared Ag + -and Cu 2+ -substituted biphasic materials, based on ion-doped HA and α-TCP, obtained after annealing monophasic-substituted HA samples at 1200°C. For antimicrobial tests in vitro, S. aureus, E. coli, P. aeruginosa and C. albicans were used. Antimicrobial activity increased with the increase of ionic concentration. The activities of biphasic materials were very high and comparable in the case of Ag + and Cu 2+ substitution. The only difference was observed in monophasic Cu-HA against C. albicans, which was much less effective, especially with the smaller concentration of Cu 2+ ions. In vitro biocompatibility was demonstrated on MRC-5 human fibroblast cells, but it should be noted that the addition of Cu 2+ ions slightly reduced the viability of cells.

Selenium-substituted hydroxyapatite
Tran et al. [117] confirmed antibacterial properties of cellulose discs coated with organoselenium-methacrylate polymer against P. aeruginosa and S. aureus. 0.2 wt% of selenium completely inhibited bacterial attachment, growth and formation of a biofilm. Strong activity of selenium nanoparticles against S. aureus was confirmed by Tran and Webster [118]. These studies led to more research concerning the antimicrobial activity of selenium-based hydroxyapatite (Se-HA) [119][120][121]. Rodriguez-Valencia et al. [119] fabricated selenium-substituted carbonated HA coatings by the pulsed laser deposition method. Samples contained selenium in the form of selenite ion SeO 3 2− . Coatings prevented the formation of biofilms by P. aeruginosa and S. aureus strains and reduced the number of colony-forming units (CFUs). Uskoković et al. [120] compared Se-HA obtained by co-precipitation and ion-exchange sorption methods. Selenite contents ranged from 0.3 to 3 wt% and the precipitation synthesis was about 10 times more effective in introducing selenium. Se-HA samples were strongly effective against E. coli and S. aureus, while being less effective against Salmonella enteritidis and ineffective against P. aeruginosa. Similar results were obtained by Kolmas et al. [121]. Figure 4 illustrates significant bacterial growth inhibition caused by selenite anions. Moreover, selenium content was in correlation with the reduction of the viability of mouse osteosarcoma cells, and the induction of apoptosis was selective, without reducing the viability of fibroblast cells. Se-HA also exhibited osteoinductive effect by increasing the gene expression of pre-osteoblastic MC3T3-E1 cells. These promising results mean that selenium substitution in hydroxyapatite will probably get more popular in upcoming years.
In addition to the well-known elements with well-established antibacterial activity, some less popular elements for such a combination, like cerium, gallium, cobalt and strontium, should be mentioned [122].

Hydroxyapatite with antibacterial ions and loaded antibiotics
Some hydroxyapatites enriched with antibacterial ions have been used to create systems containing antibiotics. Most of these systems have been developed using silver ions because of their strong antibacterial properties.
Ivashenko et al. [123] investigated the effect of silver ions in HA structure on the adsorption rates of ciprofloxacin. The research was carried out using commercially available materials such as Biomin G ® (HA) and Biomin GIS ® (HA enriched in an Ag + amount of <0.1 wt%). Interestingly, the presence of silver ions in HA led to lowered specific surface area and significantly decreased adsorption rates of ciprofloxacin when compared with undoped material. Unfortunately, no research was done to test the antibacterial activity or release of silver ions or ciprofloxacin.
Another work [124] proposes long HA nanowires enriched with Ag + ions and ciprofloxacin. The material performed high and long-termed effectiveness against E. coli and S. aureus.
Ciprofloxacin and tetracycline were also adsorbed on a thin film made of Ag-HA [125]. In vitro microbiological tests have shown that thin films containing Ag-HA and selected antibiotics may become an effective solution in the prevention and treatment of bone infections (see Figure 5). Hydroxyapatite with an additional phase of sphere-shaped silver phosphate molecules and enriched with vancomycin or gentamicin has been developed by Suvannapruk et al. [126]. The authors have proved that such a combination of silver phosphate nanoparticles and antibiotic prolongs the antibacterial activity and increases the efficiency of the material.
An interesting experiment was proposed by Sampath Kumar [127], resulting in the creation of HA enriched with Ag + , Sr 2+ or Zn 2+ ions. These materials were used as doxycycline-releasing media. Of all the materials under investigation, Ag-HA had the lowest doxycycline loading. The most optimal system was the Zn-HA, because it produced a sufficiently effective level of antibacterial activity and, at the same time, contained an adequate quantity of loaded antibiotic.
Recently, Yu et al. [128] synthesized Cu-HA microspheres using a microwave-hydrothermal method. Interestingly, the phosphorous source for the synthesis was creatine phosphate -a substrate for ATP production. Chitosan-based scaffolds were created by freeze drying and loaded with doxorubicin to examine drug loading and release. Osteogenic and angiogenic properties were evaluated both in vitro and in vivo. Samples were bioactive and non-toxic. The authors claim that the release of Cu 2+ ions, by stabilizing HIF-1α, induced hypoxia in the bone tissue, which significantly stimulated neovascularization and improved bone regeneration.

Conclusions
Sophisticated porous hydroxyapatite structures and hydroxyapatite/polymer structures seem to offer potential as systems for the delivery of antibacterial agents directly into the bone. Thus, rather than delivering a single medicine, it would be possible to conduct combined therapy with various antibacterial agents with different dissolution profiles. The simultaneous application of antibiotics and HA modified by ions with antibacterial activity may contribute to development of the effective prevention and treatment methodology for postsurgical osseous inflammations. A therapy designed to directly target the affected area may significantly reduce general side effects of using antibiotics, improving therapeutic efficiency, while also allowing a reduction in dosage, which seems to be beneficial in both medical and economic terms.
[13] Lerner T, Liljenqvist U. Silicate-substituted calcium phosphate as a bone graft substitute in surgery for adolescent idiopathic scoliosis.