Plasmonics Devoted to Photocatalytic Applications in Liquid, Gas, and Biological Environments

Plasmonic nanomaterials have emerged in the last years as a very interesting option for many photocatalytic processes. Their localized surface plasmon resonance (LSPR) brings in some unique properties that overcome some of the drawbacks associated with traditional photocatalysis based on semiconductors. Even when in its infancy, many advances have been made in the field, mainly related to the synthesis of new structures with the capabilities of light absorption in the whole solar spectrum. A great number of reactions have been attempted using nanoplasmonic materials. In this chapter, we present the most recent advances made in the field of plasmonic photocatalysis comprising an introductory section to define the main types of plasmonic nanomaterials available, including the most recently labeled alternatives. Following with the major areas of catalytic application, a second section of the chapter has been devoted to liquid-phase reactions for the treatment of pollutants and a selection of organic reactions to render added-value to chemicals under mild conditions. The third part of the chapter addresses two specific applications of nanoplasmonic photocatalysts in gas-phase reactions involving the remediation of volatile organic compounds and the transformation of carbon dioxide into valuable energy-related chemicals. Finally, a fourth section of the chapter introduces the most recent applications of plasmonics in biochemical processes involving the regulation of cofactor molecules and their mimetic behavior as potential enzyme-like surrogates.


Introduction
Solar energy harvesting has become an important matter nowadays.The use of solar light as energy source is a cleaner and even a more economic way to provide energy to processes. In this sense, conventional photocatalysis, as it makes use of mainly semiconductors as catalyst, is not the most efficient way to harvest the light coming from the sun, since it only contains 5% of UV light, which is the kind of radiation necessary to excite those catalysts [1]. In the quest of new materials that could help to improve the efficiency of traditional photocatalyst, plasmonic nanomaterials have attracted much attention lately among the scientific community. This is so because this new family of materials offers/exhibits several advantages over their bulk counterparts that can be useful in very different fields like sensors, biomedicine, photocatalysis, etc [2]. Besides their size, what makes these materials so interesting is their characteristic localized surface plasmon resonance band (LSPR). This LSPR can be defined as the collective coherent oscillation of free charges on the surface of the nanoparticle when they are in resonance with the incident light. This resonance generates an enhancement in the electric field on the surface of the nanomaterials that may affect molecules or materials surrounding it. The LSPR can be very useful for photocatalysis in many different aspects depending mostly on the type of plasmonic material used. We have tentatively classified them into three main categories: (1) Pure plasmonic materials; (2) Hybrid plasmonic materials and (3) Alternative plasmonic materials.

Pure plasmonic materials
The photocatalysts belonging to this group are only composed by unsupported plasmonic metals and those supported on photocatalytic insulators allowing all the chemistry to happen on the metal nanomaterial. In this case, after excitation of the plasmon band, a high density of charge carriers are generated on the surface of the nanoparticle that can undergo reduction or oxidation reactions with the molecules adsorbed on their surfaces [3].
This mechanism is generally referred to as direct charge transfer since the carrier is directly transferred from higher energy levels in the metal to the lower unoccupied molecular orbital of the adsorbate initiating the chemical reaction (Figure 1). Another property of the plasmonic nanoparticles is the generation of heat on their vicinity. Following the excitation, the charges generated can suffer radiative or nonradiative relaxation. The former will be discussed later in this section. The nonradiative relaxation is mainly related with electron-electron and electronphonon interactions, which give rise to the generation of heat, very localized in the surface of the nanoparticle. This heat can be transferred to the surrounding media, helping in thermally activated reactions. The temperature reached on the surface of the metal is dependent on the nature of the metal itself. For gold, it has been estimated to be as high as 500-700°C [4] and for silver, is expected to be much higher since the absorption cross section of the latter is around 10 times higher than for gold. An example of photocatalytic reaction performed by gold plasmonic nanoparticle (AuNP) is given by Hallet-Tapley et al., using them for the selective oxidation of alcohols [5]. They used green laser and LED in order to excite the plasmon band of the AuNP and oxidize selectively the alcohol molecules surrounding the AuNP. In their work, the authors proposed two possible mechanisms for the reaction, one involving a single electron transfer from gold to H 2 O 2 providing the radicals that initiate a chain reaction, and the other implicating the generation of heat as the cause for the breaking of the peroxide bond. Another interesting example is the use of nanorattles composed of a gold nanosphere inside and a nanoshell of gold/silver [6]. In this case, the authors claim that the better performance of this structure comes from the formation of electromagnetic hot spots in the interface of the two different materials. These hot spots create a higher density of reactive oxygen species responsible for the oxidation reaction. In order to expand the absorption of light to the visible and even the IR part of the spectrum, many researchers have tried to synthesize anisotropic nanoparticles. One of these examples is the synthesis of hexagonal Pd nanoplates for their use in the Suzuki coupling reaction. Trinh et al. [7] were able to obtain plasmonic Pd nanoparticles with their plasmon band located along the visible and the near IR according to their aspect ratio. They used this LSPR to generate hot electrons with the energy to perform the Suzuki reaction on the surface of the catalyst.
In this group, we can also include nanomaterials consisting of metal nanoparticles supported on photochemical insulators. The latter means that since the bandgap of the material is too high, it cannot be excited in the visible or near UV part of the spectrum. Metal oxides like ZrO 2 , Al 2 O 3 , or SiO 2 with bandgap energies above 5-6 eV are representative of this group. Liu et al. [8] performed a selective reduction of nitrocompounds to the azoxy derivatives using Ag-Cu alloy nanoparticles supported on ZrO 2 . They demonstrated that by irradiating in the visible region, they could control the selectivity of the reaction only with the composition of alloy with no influence from the support.

Hybrid plasmonic materials
Semiconductors photocatalysts have dominated the field since Fujishima and Honda used TiO 2 to do water splitting with UV light in 1972 [9]. Despite the convenient properties of this semiconductor for photocatalysis, it also has some drawbacks in order to use them in real photocatalytic applications like low photon efficiency, high charge carriers recombination rate and a high bandgap (3.2 eV), that means it can only be excited with UV light. To overcome these problems, great efforts have been devoted in the past years to develop a new family of photocatalysts consisting of supporting metal plasmonic nanoparticles on the surface of semiconductors. The metal nanoparticle brings in some properties that complement and fix some of the downsides previously mentioned for the semiconductors (Figure 2). First, they enhance the absorption of light bythe material. They do this in different ways. The plasmon bands of the metal nanoparticles are usually in the visible region, expanding the absorption of the hybrid material to the visible or even near IR. Also, the huge absorption extinction coefficient of plasmonic materials allows them to absorb most of the light incoming to the hybrid, therefore, keeping most of the photon absorbed on the surface of the material, avoiding in a high extent the recombination of carriers that usually takes place in the semiconductor. Another feature of these materials that aids the absorption of light is the scattering. Plasmonic nanoparticles can scatter part of the light that are not able to absorb, thereby allowing its reemission and potential absorption by other nanoparticles allocated on its vicinity and increasing the pathway of light absorbed by the material. Another characteristic of these materials is the formation of what is called Schottky barrier between the metal and the semiconductor. In that interface, an electric field is built in that separates the charge carriers formed in or close to the barrier, avoiding in that way of the recombination of electron and holes, and therefore increasing the lifetime of those carriers, so they can react with other molecules adsorbed on the surface. Besides absorption, plasmonic materials contribute to improve the photocatalytic performance of semiconductors through other mechanisms. After absorption of light, the excited electrons reach high-energy levels, so they can overcome the Schottky barrier formed between the metal and the semiconductor, and can be transferred from the nanoparticle to the semiconductor and start the photocatalytic process. This electron transfer means that a material that was only viable before for use with UV light due to its high bandgap, now can be used in almost any wavelength, because the shape and size of these metal nanoparticles can be tailored to have the plasmon band in the visible or even in the IR region of the spectrum. This is a very important feature when we think about the use of these materials under solar light illumination, since the excitation area can be expanded to the other 95% of the solar spectrum. Other mechanism by which plasmonic materials can enhance the photocatalytic performance of semiconductors is by the generation of an intensive local electric field that can promote/enhance the generation of more charge carriers on the surface of the semiconductors. Because of this electric field, plasmonic nanoparticles can also generate charge carriers without any contact with the support, which is beneficial when the contact between the metal and the semiconductor is not well enough to form a Schottky barrier, or when a layer of other material is needed to support the nanoparticles. It has also been probed that this electric field may help to polarize nonpolar molecules surrounding the metal nanoparticles and increase their adsorption to the surface of the semiconductor. Finally, another important feature of the plasmonic materials that enhances the photocatalytic response of these hybrid systems is the generation of heat on the vicinity of the nanoparticles. The high temperature generated in highly localized points can improve the reactions rate and the mass transfer in the reaction system. Due to these properties, plasmonic hybrid materials are certainly a very interesting option to make some industrial processes environmentally and economically attractive.

Alternative plasmonic materials
Until very recently, nonmetal materials considered were not able to hold a LSPR due to the low free charge carrier concentration on their surface. However, lately many studies have probed that a whole variety of materials can be tuned to increase the free carrier concentration, and therefore be able to behave as plasmonic materials in the visible and IR regions [10]. Usually, doping the structure of metal oxides or adding oxygen vacancies increase the concentration of free electron within the metal oxide, and is a good way to get a plasmonic material. Examples of this are oxides of aluminum, zinc, cadmium, or tungsten, which after doping with different element acquire plasmonic characteristics in the visible or IR region due to the increase of the electron concentration [11]. Creating oxygen vacancies is also possible to get an analogous effect. For instance, tungsten oxide renders a plasmonic behavior in the IR, allowing their use in photocatalytic applications after the induced generation of oxygen vacancies [12]. A different circumstance happens with chalcogenides like CuS, in which the reduction of the Cu percentage creates an increase of the hole concentration, which results in a wide plasmon band in the IR region (Figure 3) [13]. All these materials are suitable to act as plasmonic photocatalysts with any of the mechanisms mentioned before.

Plasmonic-driven photocatalytic degradation of aqueous contaminants
Heterogeneous photocatalysis has been demonstrated as an economical and effective technology to remove organic pollutants from aqueous environments [14,15]. In recent years, the LSPR effect of plasmonic materials has been applied to boost the photocatalytic performance of chemical transformations under visible light irradiation. A vast number of studies have focused on the preparation of plasmonic nanostructures and further application for the removal of pollutants from aqueous media. As there are some previous reviews reporting the use of plasmonic materials for pollutant removal [16][17][18], in this section we only show some recent applications on this topic, aiming at illustrating various types of plasmonic photocatalysts as well as target contaminants. These are summarized in Table 1.
Among the target pollutants, dyes such as rhodamine B (RhB), methylene blue (MB), or methyl orange (MO) are the most studied ones due to the ease of monitoring their removal. Nevertheless, in dye compounds the effect of photosensitization could produce extra electrons and accelerate the photocatalytic process. For this reason, the photoremediation of colorless target contaminants represents a more interesting case study [19]. For instance, the photocatalytic removal of other organic pollutants such as phenolic compounds, including bisphenol A, nitrophenol, and chlorophenols, antibiotics such as tetracycline or ciprofloxacine, organic solvent as trichloroethylene or even chlorinated paraffins have also been reported and summarized in Table 1. In addition to organic pollutants, this technology has been successfully applied for the treatment of hazardous inorganic compounds, such as the reduction of carcinogenic Cr (VI), from K 2 Cr 2 O 7 to Cr (III) [20].  Although most of plasmonic photocatalysts devoted to pollutants removal have been based on hybrid structures containing noble metals such as Au and Ag, supported on semiconductors (mostly TiO 2 or ZnO), novel plasmonic materials and structures are currently under development [21]. For instance, low-cost bismuth (Bi) has been reported to be an alternative to noble metals due to their direct plasmonic photocatalytic ability [22] which makes it a promising cocatalyst to enhance the efficiency of multiple photocatalysts, as reported in various recent studies [22][23][24]. Plasmonic semiconductor Cu 2−x Se deposited on the surface of graphitic carbon nitride (g-C 3 N 4 ) was also proposed as visible light photocatalysts for dye removal [25].
Recently, Meng and Zhang [26] developed and investigated for the first time a Pd-doped Bi 2 MoO 6 photocatatalyst (Pd/PdCl 2 -Bi 2 MoO 6 ) which exhibited an enhanced efficiency for phenol removal due to the reduction of electron-hole recombination rate, the SPR of Pd nanoparticles, and the generation of the strong oxidizing agent Cl 0 from Cl − on the surface of Bi 2 MoO 6 .

Organic synthesis
The application of heterogeneous photocatalysis in organic synthesis constitutes a more challenging issue than the degradation of organic contaminants [37] and much effort is being devoted in this field, as recently reviewed elsewhere [37][38][39][40]. The use of plasmonic nanomaterials as visible light-driven photocatalysts constitutes an interesting and appealing alternative to carry out a wide variety of chemical reactions to generate fine chemicals of industrial

Nanoplasmonics -Fundamentals and Applications
interest while working under mild conditions [41]. This chapter section overviews some examples of representative reactions with both industrial and fundamental interests.

Oxidation reactions
The selective oxidation of alcohols to their corresponding carbonyl counterparts is one type of mostly studied plasmon-assisted photocatalyzed reactions [16]. For instance, Au/CeO 2 was applied for the selective oxidation of benzyl alcohols to corresponding benzaldehydes in aqueous suspensions under irradiation by visible light from a green LED [42]. Hallet-Tapley et al. [43] also demonstrated the ability of Au supported on hydrotalcite, ZnO, or Al 2 O 3 to selectively oxidize sec-phenethyl to acetophenone and benzyl alcohol to benzaldehyde, in presence of H 2 O 2 using 530 nm LED as the photoexcitation source ( Figure 4A). Yu et al. [44] and more recently, Chen et al. [45] supported gold catalysts for the selective aerobic oxidation of benzyl alcohol to benzaldehyde driven by visible light. Plasmonic photocatalysis has also been applied to amide production via tandem oxidation/amidation processes catalyzed by Au/SiO 2 under 532 nm laser irradiation [46].
Esterification is one of the fundamental reactions in organic synthesis, as its products are widely used as precursors and intermediates for the production of fine chemicals, fragrances, natural products, or polymers [38]. Traditionally, esters are synthesized by the reaction of activated acid derivatives with alcohols, in multi-step reaction processes that yield high amounts of undesirable byproducts. In addition, these usually require harsh conditions of temperature, pressure, and pH [38,47]. Xiao et al. [47] reported a one-pot process for the direct oxidative esterification of aliphatic alcohols under mild conditions, using gold-palladium alloy nanoparticles (Au-Pd alloy NPs) on a phosphate-modified hydrotalcite as a recyclable photocatalyst ( Figure 4B). It was found that the intensity and wavelength of the irradiated light could remarkably change the reactivity. The explanation was that higher irradiance provides more light excited energetic electrons, resulting in a stronger electromagnetic field in the vicinity of the NPs (LSPR field enhancement effect). On the other hand, photons with a shorter wavelength (<550 nm) are able to excite metal electrons to higher energy levels, and these electrons have more chances to transfer to the antibonding orbitals and induce reaction. Wavelength effect is more important at low temperatures, when the excited electron transfer effect dominates the photocatalytic activity, and the thermal and photothermal effect contributes much less [47].
Likewise, Zhang et al. [48] reported the visible light driven esterification from aldehydes and alcohols using supported Au nanoparticles (Au/Al 2 O 3 ) at ambient temperatures. From the results at different wavelength ranges, it is concluded that gold plays an active role in harvesting visible light and that the LSPR effect plays a critical role in enhancing the reaction activity in the catalyzed processes.

Reduction reactions
Chemical reduction reactions constitute another interesting route for the synthesis of fine chemicals, and plasmonic materials have also been utilized in several photocatalytic reduction processes. For instance, plasmonic gold nanoparticles (Au NPs) were successfully applied as catalyst to perform the reduction of resazurin to resorufin [49] via laser drop (532 nm) or LED (530 nm) plasmon excitation. The use of Au NPs supported on different materials was also investigated for the selective reduction of organic compounds under visible light (or simulated sunlight) [50]. Au/CeO 2 catalysts were found to be efficient in the reduction of nitroaromatics to azocompounds, hydrogenation of azobenzene to hydroazobenzene, reduction of ketones to alcohols, and deoxygenation of epoxides to alkenes. The SPR effect of Au NPs was reported to play a key role in assisting activation of N=O bonds, so that the main product in the reduction of nitrobenzene under visible irradiation was different from that obtained under UV irradiation [50].
It has also been reported that Cu/graphene catalyst exhibits high activity for the reductive coupling of nitroaromatics to aromatic azocompounds under solar irradiation [51].
The product selectivity changed significantly with temperature, and conversion was found light intensity dependent. The light absorbed by Cu nanoparticles was the major driving force of the reaction as the highest conversion in the visible light range was in the range 530-600 nm, where the Cu nanoparticles strongly absorb the light due to the LSPR effect [52].
Another representative example is referred to the reduction of styrene in the presence of hydrogen to yield ethylbenzene. This chemical reduction was successfully achieved in the presence of Ag-Pd nanocages under visible light irradiation. In these photocatalysts, Pd provides active sites for hydrogenation reactions, whereas Ag offers plasmonic properties to convert light into heat [53].

Cross-coupling reactions
Plasmonic materials have also been investigated as photocatalysts for cross-coupling reactions, which have been accepted as convenient one-step methods to render complex molecules of interest for the synthesis of natural and advanced materials, bioactive products, agrochemicals, or medicines [38]. Au-Pd nanostructures consisting of Au nanocrystal cores and tightly bonded Pd nanoparticles could harvest visible to near-infrared (NIR) light for Suzuki coupling of iodobenzene or bromobenzenes and aromatic boronic acids to biphenyls under solar radiation, and also under 809 nm laser irradiation [54].
In a study by Xiao et al. [3], five different cross-coupling reactions, namely the Sonogashira, Stille, Hiyama and Ullmann C-C couplings, and the Buchwald-Hartwig amination (C-N cross-coupling) were investigated to demonstrate the possibility of applying Au-Pd alloy NP photocatalyst to enhance the intrinsic catalytic activity of Pd sites under visible light irradiation and at low temperatures ( Figure 4C). The results suggest that electrons of alloy NP are excited under light irradiation and are then transferred from the nanoparticle surface to the reactant molecules adsorbed on the nanoparticle surface, weakening the chemical bonds of the molecules and facilitating the reactions. Increasing the light intensity accelerates the reaction rate due to increased population of photoexcited electrons. The irradiation wavelength also affected the reaction rates, and ultraviolet irradiation was required to drive some reactions with certain substrates.
Hu et al. [55] developed a novel and efficient approach to synthesize interfaced dimers made of Au NPs and bimetallic nanoshells, such as Au/Ag, Pt/Ag, or Pd/Ag. The Au NP-Pd/ Ag bimetallic nanoshells were then used for catalyzing Suzuki coupling reactions between phenylboronic acid and iodobenzene at 80°C, yielding biphenyl. After 45 min in the dark, the conversion of reactants was 95%. Under visible light illumination, the reaction was significantly accelerated, 95% conversion in only 15 min. The increase in the reaction rate under illumination was attributed to the strong SPRs in the Au NPs, which enabled absorption of visible light in the dimers, leading to an enhancement in catalytic performance.
Cui et al. [56] synthesized Cu 7 S 4 @Pd heteronanostructures and probed their photocatalytic potential for Suzuki coupling reaction, hydrogenation of nitrobenzene, and oxidation of benzyl alcohol in the NIR range, respectively. As the Cu 7 S 4 @Pd LSPR peak position was close to 1500 nm, a 1500 nm diode laser was used as illumination source for the photocatalytic reactions. Additionally, irradiation at 808 and 980 nm were also evaluated. The highest conversions rates were obtained for 1500 nm irradiation due to LSPR enhancement in this region. To evaluate the pragmatic feasibility of the photocatalyst, the catalytic reactions were evaluated under real sunlight irradiation (~40 mW/cm 2 ) as well, and high conversion rates were attained ( Figure 4D).
In a study by Trinh et al. [7], plasmonic Pd hexagonal nanoplates, with tunable longitudinal LSPR were synthesized and applied to catalyze Suzuki coupling reaction. The catalytic activity of the Pd nanoplates was 2.5 and 2.7 times higher than that of nonplasmonic Pd nanooctahedral and Pd nanocubes, respectively, upon illumination at wavelengths in the range 300-1000 nm. These results, along with theoretical studies, revealed that Pd hexagonal nanoplates are able to harvest visible to NIR light, and that the increase in the catalytic activity on Pd nanoplates is primarily a result of the plasmonic photocatalytic effect of plasmon-induced hot electrons. Recently, it has been revealed that metal oxide nanostructures, such as WO 3−x , MoO 3−x , and TiO 2−x , can exhibit LSPR in the visible and NIR region due to abundant oxygen vacancies or heavy doping [57,58]. Lou et al. [57] demonstrated that the plasmon excitation of WO 3−x nanowires by long wavelength irradiation can enhance main product yield and selectivity in Suzuki coupling reactions catalyzed by the attached Pd nanoparticles.

Disinfection
While TiO 2 photocatalytic inactivation of bacteria and viruses has been known for decades [59], the number of studies using plasmonic materials for water disinfection is still rather limited.
Silver halides (Ag/AgX where X = Cl, Br, I) supported on TiO 2 or carbon materials have been the most studied photocatalysts for antimicrobial applications. Tian et al. [60] prepared a AgCl@Ag@TiO 2 sandwich-structured photocatalyst and evaluated its bactericidal activities in terms of the inactivation of Gram-negative bacteria Escherichia coli K12 (E. coli K12) under visible light irradiation. In the absence of irradiation, the catalyst exhibited a negligible killing response, whereas visible light irradiation in absence of photocatalyst only achieved the inactivation of 6% E. coli colonies in 30 min. In contrast, when AgCl@ Ag@TiO 2 was used, nearly 77% of E. coli K12 population was inactivated after 6 min under These species, along with • OH produced from holes in the surface of AgBr, are involved in the photocatalytic bacterial inactivation process.
More recently, Xia et al. [62] prepared a series of Ag/AgX/RGOs (RGO = reduced graphene oxide) composites and evaluated their performance for water disinfection upon visible light. The visible light irradiation without plasmonic catalyst or the photocatalyst in the absence of light irradiation showed no bactericidal effect. Upon visible light irradiation, Ag-AgBr/RGO exhibited high photocatalytic inactivation efficiency and attained complete inactivation of 7 log cfu/mL E. coli cells in 8 min. Remarkably, additional experiments were also carried out to evaluate the possible effect of Ag + ions in order to clarify the disinfection mechanism of Ag-based plasmonic photocatalyst. Authors found that light irradiation promoted the release of free Ag + ions from Ag-AgBr/RGO and also enhanced the antimicrobial activities of Ag + ions. These were able to induce the damage of metabolic process while the cell membrane damage was rather limited. The primary bactericidal effect of visible light irradiated Ag-AgBr/RGO resulted from the sustainable generation of reactive species. Plasmonic-induced H 2 O 2 plays the leading role, collaborating with e-, • O 2 − , • OH to induce damage of microbial metabolism processes, destroy the cell envelope and lead to the leakage and degradation of intracellular substances.
AuNP-based nanocomposites have also been investigated for disinfection applications. In this regard, Sarkar et al. [63] developed a plasmonic photocatalyst derived from functionalized amylopectin and in situ incorporated TiO 2 and AuNPs (g-AP-pAA/TiO 2 -Au), and demonstrated its antimicrobial activity in the presence of both UV, and especially, visible light irradiation, as depicted in Figure 5.
Li et al. [64] developed a nonnoble metal plasmonic photocatalyst consisting of a TiN/TiO 2 composite and evaluated its performance for the photocatalytic disinfection of E. coli in a buffer solution under visible light illumination. In the absence of photocatalyst or visible light,

Nanoplasmonic photocatalysis in gas-phase reactions
Besides their use in aqueous media photocatalysis, plasmonic nanomaterials have been lately investigated for their use in gas-phase reactions. Due to the broad range of reactions in gas phase currently under study, in this section we will focus on two big groups of them: degradation of volatile organic compounds (VOCs) and chemical to energy conversion.

Photo-degradation of volatile organic compounds
Air pollution is of great concern nowadays due to the damage that a long exposure can do to human health. Indoor and outdoor environments are suitable to suffer from high concentration of VOCs due to human activity, so currently it is considered urgent to address this problem in a more efficient way. Currently, the methods used to eliminate VOCs vary from physical methods like filtration or adsorption, to chemical ones like UV irradiation or ozone treatment [65]. The latter, being efficient for the purpose of eliminating the hazardous materials from air, is also harmful to human health, so there is a need for new methods to eliminate VOCs from air. In this case, the use of plasmonic materials seems to be a logical step forward, not only in order to avoid exposure to dangerous atmospheres, but also because of the possibility of using solar energy instead of other expensive and unsafe source of energy.
While the examples of photocatalysis for VOCs elimination are growing lately, the ones using plasmonic materials, even when growing every year, are still far from conventional semiconductors ones. One of the first examples in using plasmonic materials for VOCs remediation comes from Chen et al. [66]. They used Au NPs supported in different metal oxides to get the total oxidation of formaldehyde with visible light. In this case, the authors wanted to use a pure plasmonic material, so they attached the Au NPs to oxide supports like ZrO 2 or SiO 2 , both with high band gap (5 and 9 eV, respectively) in order to avoid excitation of the support from the visible light source. The mechanism proposed involves two of the features of plasmonic materials mentioned above. In one hand, irradiating the Au NPs on their plasmon band will increase the temperature locally high enough to perform the VOCs oxidation in high extent. Besides the temperature effect, the high electric field generated on the surface of the nanoparticles would activate polar molecules as formaldehyde present on the surface of Au NPs, aiding to the total oxidation of the compound. Another example of decomposition of VOCs using plasmonic materials is the isopropanol oxidation performed by Dinh et al. [67]. In this case, the structure of the catalyst is a key for its performance. It consists of Au/TiO 2 nanostructured photocatalyst that is constructed by the three-dimensional ordered assembly of thin-shell Au/TiO 2 hollow nanospheres. Due to that composition, it can be considered a hybrid plasmonic structure with some special qualities. The authors claim that the photonic structure of the catalyst enhances the absorption of the plasmonic AuNP by the multiple scattering and the slow photon effect characteristic of these architectures. This enhancement absorption of the plasmon band provides an activity several times higher than the normal Au/TiO 2 structure.
The last example for VOCs oxidation using plasmonic materials comes from Sellappan et al. [68]. They combine gold and silver nanoparticles with TiO 2 with different configurations in order to evaluate the electron transfer after light excitation. They evaluate the photocatalysis of the degradation of methanol and ethylene under different conditions. One of those conditions is the physical contact between the metal and the semiconductor. When the nanoparticles are in contact with TiO 2 , a Schottky barrier is formed, which enhances the charge separation under UV light illumination. When the metals are not in contact with the support, they also observe an enhancement in the activity of the photocatalyst that they assign to a near and far field effect of the plasmonic nanomaterial. This is so because, even when they are separated, the distance is short enough from the support to feel the high electric field generated on the metal nanoparticle.

Plasmonic-driven chemical to energy conversion processes
Global warming is nowadays one of the biggest problems to be addressed in our society. The vast amount of fossil fuel consumed during the last decades has broken the natural balance of CO 2 emission and uptake, leading to high concentrations of this gas in the atmosphere and in the oceans, and provoking a sharp climate change. Besides, due to this enormous growing in fossil fuel consumption, the society is exhausting their reserves at a very high rate creating an urgent need for alternative sources of energy. With this in mind, photocatalysis has emerged as a promising tool to kill two birds with one stone. On one hand, it can help to reduce the CO 2 emitted to the atmosphere and also in that process give products that could be able to store energy. As a first example of this, in 1979 Inoue et al. [69] attained for the first time the reduction of CO 2 with light using several semiconductors as photocatalysts. Even when the reaction was performed in liquid phase, we consider appropriate to mention it here since it was the first attempt that obtained valuable products after the reduction of CO 2 using light as energy source. Since that first work, many attempts have been made in order to synthesize photocatalysts to reduce CO 2 to different interesting products. Most of those catalysts are semiconductors like TiO 2 or ZnO which, while they possess many interesting properties to be used as photocatalysts, they also have some drawbacks that limit their use on large scale applications, as low photon absorption efficiency, high charge carrier recombination rate or being restricted to the UV region of the spectra. In order to overcome these downsides, in recent years the scientific community have paid attention to plasmonic materials as an attractive tool to be used for the reduction of CO 2 . Liu et al. [70] first reported the use of plasmonic gold catalyst for the dry reforming of CO 2 with methane to obtain syngas. This reaction usually requires high temperatures (800-1000°C) and is of great interest since it would transform two greenhouse gases into molecules suitable for energy storage like CO and H 2 . They prepared a catalyst consisted of Rh and Au supported on SBA-15 in order to use the good properties of Rh for this reaction and the plasmon band of Au to activate the reactants. They claim that the high electric field generated on the AuNP induces polarization on the CO 2 and the CH 4 molecules activating them, and enhances the conversion to syngas. Another interesting reaction involving the consumption of CO 2 is the reverse water gas shift reaction (RWGS). Upadhye et al. [71] probed that using AuNP supported over TiO 2 and CeO 2 , they could enhance the yield of the reaction illuminating with visible light from 30 to 1300%. According to them, the LSPR of the catalyst changed the intrinsic kinetics of the reaction on the surface of the catalyst by increasing the rate constant of either the carboxyl decomposition or the hydroxyl hydrogenation, two of the key steps in this reaction. They attributed the rate enhancement either to the generation of hot electrons or the polarization effect of the high electric field generated by the plasmonic nanoparticles on the adsorbates. Not only conventional semiconductor materials have been used to support plasmonic nanoparticles, lately several authors have used graphene and derivative as active supports for photocatalysis. This is the case of Shown et al. [72] that evaluated the activity of Cu NPs supported on graphene oxide (GO) for the reduction of CO 2 (Figure 6). In their work, they prepared the catalyst with different Cu loading and evaluated the photoreduction using visible light, and compared the results with GO alone and with TiO 2 P25. The authors found an increase in the products yield for the CuGO hybrid material by 60 times with respect to the GO, and 240 times with respect to the P25, obtaining methanol and acetaldehyde as the main products. They attributed the enhancement to a modification in the work function of the GO by the Cu NPs that improved the charge separation.
Finally, some additional examples where CO 2 has been successfully hydrogenated to yield methane in the presence of nanoplasmonic photocatalysts are briefly described below and summarized in Table 2. Methane has gained an increasing interest, given its abundance and its extended use as fuel in fertilizers or as intermediate in the petrochemical industry [73]. Most of the studies report the combination of titania or P25 semiconductor supports with noble-metal-based cocatalysts, which are able to expand the band gap toward the visible range through their surface plasmon band [74], act as charge reservoirs, and also as active and selective catalytic centers [74][75][76][77][78][79][80][81]. In this regard, the presence of Pd or Pt strongly enhances the selectivity toward methane in comparison with the preferential pathway toward CO observed in TiO 2 , being of paramount importance for the proper formation of organic intermediates. As a major drawback, progressive deactivation was observed upon oxidation of Pd into PdO domains [79]. Furthermore, the effective formation of Au-Cu alloys was also found extremely active, thereby outperforming the photo- catalytic conversions of their respective single metal counterparts, while expanding their response in the visible range as nicely demonstrated by transient absorption spectroscopy studies [74].
Other relevant studies additionally dealt with the use of catalytic monoliths [75], fluidizedbed reactors combined with LEDs [77] or included the use of novel semiconductor supports based on carbon nitride or reduced graphene oxide that provided additional sites for the accommodation of CO 2 and the active cocatalysts [76,82]. Finally, Zhang et al. synthesized a hybrid material consisted of Rh nanocubes supported on Al 2 O 3 and used for the selective hydrogenation of CO 2 to CH 4 , avoiding almost completely the competitive production of CO (see Figure 7). The authors used UV and blue light coming from LED irradiators in order to excite the plasmon band of the metal nanoparticles and generate high-energy electrons that are transferred to the adsorbates [81].

Photobiocatalysis
A promising field for the use of nanoplasmonics currently under development is the photobiocatalysis. In this relatively novel area, the main goal is obtaining photocatalysts inspired in natural photosynthetic centers. A brief overview of the current state of the art in this field devoted to regular semiconductors has been recently published elsewhere [83].More recent studies involving the use of plasmonic materials have been reported by Sanchez-Iglesias et al. Their studies focused on the evaluation of multiple gold-shaped plasmonic nanostructures (see Figure 8) and their effect on the effective photoregeneration of nicotinamide adenine dinucleotide (NADH) molecules. These latter molecules are extremely important in natural biochemical routes as mediating cofactors in many enzymes [84,85]. Moreover, cofactor molecules are necessary, for instance, in the photosynthesis process as light harvesters and intervening in the reduction-oxidation balances involved in respiration [86]. The major drawbacks associated with cofactor molecules have arisen from the limited success achieved in the past year attempting their regeneration (reduction) via nonenzymatic pathways. Organic dyes, semiconductors, or polymers have been previously used as photocatalysts to regenerate NADH cofactors, but these molecules intrinsically possess a poor quenching ability to accept electrons. Therefore, the need for implementing an electron relays acting as mediator has been suggested to overcome this limitation. Up to date, the choice of suitable mediators has been rather scarce and limited to a few examples of Rh-based organometallic complexes. The use of gold plasmonic nanostructures represents a more straightforward and affordable alternative.
The first successful example of plasmonic cofactor photoregenerator was reported for gold nanorods coated with Pt domains on their tips (Figure 8B), thereby representing a previously defined plasmonic photocatalyst containing a heterojunction that combines a plasmonic structure (Au NRs) and a catalytic active site (Pt) to successfully carry out the regeneration (reduction) of NADH cofactor molecules [85]. A subsequent study carried out by the same authors determined an even more remarkable photo-response of gold nanostars with epitaxially grown Pt domains that was associated to the major light harvesting capacity of the star-shaped plasmonic structures (see Figure 8A) [84,85]. The potential combination of these plasmonic heterojunctions with other semiconductors represents a very promising alternative to obtain suitable mediators that can help to modulate multiple biochemical processes via light-induced inputs.

Artificial enzymes
Another niche of great biotechnological interest for the potential application of nanoplasmonics is related with the search for novel artificial enzymes [86]. Natural enzymes are wellknown biocatalysts that regulate every biochemical processes involving living organisms.
Recently, an emerging research subfield has emerged to find novel nanomaterials that can mimic the role of natural enzymes as highly active, and specific catalysts without incurring in their intrinsic limitations, such as limited stability by denaturalization, strong sensibility on variations of their optimal environment, difficulties for effective retrieval and reuse, and high costs derived from the multiple synthesis and purification steps implied in their preparation. In order to circumvent these major drawbacks, the search for stable and affordable alternatives has brought the spotlight on the development of artificial systems based on inorganic/ organic nanomaterials.
In this regard, it is worth mentioning that Prof. Santamaria's group recently developed and tested one of the first NIR-activated enzyme-like plasmonic photocatalysts used as a glucoseoxidase surrogate (Figure 9) [87]. Glucose-oxidase biomimetic systems hold a huge potential for biomass conversion, selective detection of glucose in blood at trace levels, and control/monitoring of internal metabolism in cells. Previous candidates based on photocatalytic semiconductors such as TiO 2 or ZnO rendered promising photoconversion of glucose [88,89], but the combination of plasmonic gold nanorods cores holding excellent NIR absorption capabilites with an outer titania nanoshell proposed by Ortega-Liebana et al. provided not only an extended response toward the whole visible-NIR range, but also additional thermal stability and photoactivity toward the effective and preferential oxidation of glucose into gluconic acid and hydrogen peroxide (Figure 9). In addition, the activity of these core-shell nanostructures was maintained in a wide pH range and was effective at near room temperature. The authors claimed that the minimal thickness of the TiO 2 shell ensured the formation of an effective Schottky barrier at the interface between Au and TiO 2 . It was also remarkable to find out that the uncoated Au NRs exhibited negligible photo-response toward the glucose oxidation, thereby corroborating the need of the semiconductor titania shell fraction to promote the generation of active radicals and the selective oxidation of the sugar molecules [87].

Conclusions
Plasmonic-based nanomaterials hold a very promising future as potential alternatives for the fabrication of next generation photocatalysts and processes where the wavelength irradiation range is expanded toward the visible and near-infrared windows, thereby maximizing the use of the solar irradiation. A wide variety of fields of action can be foreseen including those described in the present chapter and some additional options including the generation of biofuels from water or biomass, photoelectrocatalysis, solar cells, or photovoltaics. The use of these types of catalysts for light-triggered therapy treatments and the specific targeting for cell-mechanisms can also be envisioned as another promising area of expansion. In conclusion, the use of plasmonics is likely going to emerge with abundant and interesting breakthroughs in the next future.