Ion-Exchange Reactions for Two-Dimensional Quantum Antiferromagnetism

Topotactic low-temperature reactions such as intercalation, deintercalation and ionexchange reactions provide a rational design of new structures of non-molecular extended solids which are otherwise not accessible by conventional high-temperature solid-state reactions [1-4]. Among candidate oxide materials used as a precursor of such reactions, the most intensively studied system is the Dion-Jacobson (DJ) type layered perovskite (Figure 1). The chemical formula of the DJ phase is expressed as A ́[An–1BnO3n+1], where A ́ is an alkali metal (Na, Rb, ...), A is an alkaline earth or rare earth metal (Ca, Sr, La, ...), B is a d0 transition metal (Ti, Nb, Ta, ...), and n is the number of perovskite layers (2, 3, 4, ...) [5, 6]. Here, alkali metal ions at the A ́ site are highly reactive because of ionic (i.e., weak) A ́-O bonding, while the perovskite unit [An–1BnO3n+1] is strongly bonded and is chemically inert. By exploiting ion-exchange reactions with various reagents, a wide variety of new or improved chemical and physical functionalities including (photo)catalysis [7, 8], ionic conductivity [9] and superconductivity [10] have been developed. However, ion-exchange reactions are rarely employed for the purpose of materials design toward low-dimensional magnetism, because those who work in this filed (mostly physicists) are not familiar with such chemical processing. In addition, compounds obtained by soft-chemical approaches involve negative effects on the crystal structure, for example, poor crystallinity, nonstoichiometry and defects. In particular, it is known that a tiny defect can easily destroy or mask intrinsic magnetic properties of low-dimensional quantum systems.


Insertion of metal halide array
Topotactic low-temperature reactions such as intercalation, deintercalation and ionexchange reactions provide a rational design of new structures of non-molecular extended solids which are otherwise not accessible by conventional high-temperature solid-state reactions [1][2][3][4].Among candidate oxide materials used as a precursor of such reactions, the most intensively studied system is the Dion-Jacobson (DJ) type layered perovskite (Figure 1).The chemical formula of the DJ phase is expressed as A´ , where A´ is an alkali metal (Na, Rb, …), A is an alkaline earth or rare earth metal (Ca, Sr, La, …), B is a d 0 transition metal (Ti, Nb, Ta, …), and n is the number of perovskite layers (2, 3, 4, …) [5,6].Here, alkali metal ions at the A´ site are highly reactive because of ionic (i.e., weak) A´-O bonding, while the perovskite unit [An-1BnO3n+1] is strongly bonded and is chemically inert.By exploiting ion-exchange reactions with various reagents, a wide variety of new or improved chemical and physical functionalities including (photo)catalysis [7,8], ionic conductivity [9] and superconductivity [10] have been developed.However, ion-exchange reactions are rarely employed for the purpose of materials design toward low-dimensional magnetism, because those who work in this filed (mostly physicists) are not familiar with such chemical processing.In addition, compounds obtained by soft-chemical approaches involve negative effects on the crystal structure, for example, poor crystallinity, nonstoichiometry and defects.In particular, it is known that a tiny defect can easily destroy or mask intrinsic magnetic properties of low-dimensional quantum systems.
In 1999, John B. Wiley et al. in the University of New Orleans reported a new type of ionexchange reactions involving the simultaneous co-exchange of transition-metal cation and chloride anion [11].As shown in Figure 1(a) and 1(b), the reactions of the n = 2 and 3 DJ phases using CuX2 (X = Cl, Br) result in the Rb + -to-(CuX) + exchange, yielding new metastable compounds (CuX) + [An-1BnO3n+1] - [11,12].Here, the Cu 2+ ions are octahedrally coordinated, bridging between two apical oxide ions from the perovskite blocks and also surrounded by four halogen ions.The CuO2X4 octahedra share edges to form a square lattice network in the ab plane.(CuX)An-1BnO3n+1 has two interesting features in terms of magnetic interactions.First, the chemical bonds between the transition-metal cations and halide anions are covalent, thereby providing sizable Cu-X-Cu superexchange interactions within the CuX layer.Second, the two-dimensional (2D) CuX layers are well-separated by the nonmagnetic perovskite blocks An-1BnO3n+1 along the c-axis, with the interlayer distance of 12 Å (n = 2) and 16 Å (n = 3).Thus, (CuX)An-1BnO3n+1 is regarded as an ideal candidate of S = 1/2 2D square lattice systems (Figure 1(c)).What is also important is the fact that this ionexchange reaction proceeds stoichiometrically, making it possible in principle to observe intrinsic quantum phenomena.

A new family of two-dimensional quantum antiferromagets
A simple geometrical consideration reveals that the magnetism of (CuX)An-1BnO3n+1 is described by a square-lattice J1-J2 model, where J1 and J2 represent the nearest neighbor (NN) interaction and the 2nd NN interaction (Figure 1(c)).According to the Goodenough-Kanamori rule, J1 and J2 are expected to be ferromagnetic (FM) and antiferromagnetic (AFM), respectively, giving a situation where geometrical frustration is present in the lattice.The J1-J2 model was originally proposed to explain the origin of high-Tc superconductivity in carrier-doped cuprates with S = 1/2 square lattice [13].Although the detail of theoretical phase diagram is still controversial [14][15][16][17][18], regardless of the approaches employed, several interesting phases appear as a function of  = J2/J1 (see Figure 2).Let us define hereafter positive and negative J as AFM and FM interaction, respectively.The most interesting phase predicted is a spin liquid phase with a spin-singlet ground state, being located at around |0.5| (in the regions of both J1 < 0, J2 > 0 and J1, J2 > 0), where frustration effect is most prominent.So far, several prototypes of the J1-J2 model were reported, for example, Li2VO(Si,Ge)O4 [19] and Pb2VO(PO4)2 [20].Unfortunately, all of them undergo magnetic long-range ordering at low temperatures and the estimated  values are far from |0.5|.
In contrast, the magnetic study for (CuCl)LaNb2O7 revealed that this material does not show long-range magnetic order down to low temperatures [21].(CuCl)LaNb2O7 and related compounds obtained by ion-exchange process exhibit a rich variety of quantum phenomena due to geometrical frustration.Hereafter, we will overview recent studies of the ionexchanged (CuX)An-1BnO3n+1 compounds, which allows a systematic understanding and tuning of magnetic properties.

(CuCl)LaNb2O7
A polycrystalline sample of (CuCl)LaNb2O7 is typically synthesized by heating a mixture of RbLaNb2O7 and anhydrous CuCl2 at 320 °C for 1 weak.The white specimen becomes light green after the ion-exchange reaction.This color change is due to insertion of Cu 2+ .The crystal structure of (CuCl)LaNb2O7 was originally assigned as tetragonal (space group P4/mmm), with one copper ion at (1/2, 1/2, 1/2) and one chlorine ion at (0, 0, 1/2) per unit cell, forming the ideal S = 1/2 square lattice.Shortly later, the neutron powder diffraction suggested the same space group but a random distribution of chlorine atoms at more general site (x, 0, 1/2) [22].The tetragonal lattice constants are a = 3.88 Å, c = 11.73Å.Compared with RbLaNb2O7 (a = 3.90 Å, c = 11.03Å), the c-axis of the ion-exchanged product significantly increases by ~ 0.7 Å, while the a-axis remains almost unchanged.This is consistent with cupper occupation between two terminal apical oxide ions from NbO6 octahedra.
The absence of long-range magnetic order in (CuCl)LaNb2O7 down to low temperatures was demonstrated first by means of magnetic susceptibility and inelastic neutron scattering (INS) experiments [21].On cooling, the magnetic susceptibility  (= M/T) (Figure 3) exhibits a Curie-Weiss (CW) behavior followed by a broad peak at around 16.5 K, which is characteristic of low-dimensional AFM system.The  decreases rapidly with decreasing temperature further.The Weiss temperature  estimated from the CW fitting is -9.6 K.The magnitude of  is smaller than the temperature at the broad maximum, indicating the presence of competing FM and AFM interactions.The obtained value of C (= 0.385 emu K/mol) agrees well with that expected theoretically for 1 mol of Cu 2+ , ensuring (almost) completion of the ion-exchange reaction.The upturn at 3.5 K in the raw data is ascribed to a tiny amount of Cu-containing impurities or defects in the CuCl layers.When the impurity contribution was subtracted, the intrinsic susceptibility approaches to zero for T  0. As shown in Figure 4(a), the INS measurements (constant-Q scan in zero field), carried out at JRR-3, Tokai, Japan, provide direct evidence for the spin-singlet ground state with a onetriplet excitation gap of  = 2.3 meV.The full widths at half maximum (FWHM) for the 2.3 meV excitation is 1.3 meV, being close to the instrumental resolution.The scattering intensity of the one-triplet excitation decreases with increasing T and levels off above approximately 20 K, a temperature comparable to the spin gap.There is another excitation centered at 5.0 meV, whose T-dependence shows the same tendency as that of the onetriplet transition.Accordingly, the second mode is the collective bound state excitations of several elementary triplets.
In general, magnetic excitations in 2D systems with a spin-singlet ground state are highly dispersive along the magnetic plane.However, the spectrum shape in constant Q scans for the one-triplet mode in powder (CuCl)LaNb2O7 specimen is completely symmetric and almost independent of Q (E ~ 0.2 meV), indicating an extremely localized nature of the excited triplets.Such a flat dispersion is characteristic of isolated spin dimer systems such as CaCuGe2O6 [23].Since the Cu spins in (CuCl)LaNb2O7 are not isolated, the observation of the dispersionless spin spectrum is a consequence of geometrical frustration.The same behavior has been observed in the 2D Shastry-Sutherland system SrCu2(BO3)2, where compared to in-plane exchange constants (5 -8 meV) the dispersion of the single-triplet excitation is much suppressed (~ 0.02 meV) [24].As shown in Figure 4(b), the Q dependence of the scattering intensity of the singlet-triplet excitation, I(1.7 K) -I(20 K), exhibits a fast oscillation.The geometrical frustration in (CuCl)LaNb2O7 gives a situation that the spinsinglet pairs are effectively isolated, which may allow us to use the isolated dimer model: where the second term sinQR/(QR) is the interference term reflecting the intradimer distance R. Unexpectedly, the estimated value of R is 8.8 Å, which is far longer than the NN Cu-Cu distance (~ 3.9 Å), and is rather close to the 4th NN distance (8.67 Å).This result contradicts the J1-J2 model, where the NN bonds are responsible for the spin-singlet formation.Figure 5 shows the field dependence of magnetization M-H and the differential magnetization dM/dH at 1.3 K [25], demonstrating field-induced phase transitions at Hc1 = 10.3T and Hc2 = 30.1 T. Reflecting the spin-singlet ground state with a finite energy gap, the initial magnetization slope is very small.Note that the small increase for H < Hc1 comes from a tiny amount of impurities or defects as also seen in the magnetic susceptibility for T < 5 K.The intrinsic magnetization curve is obtained by subtracting the extrinsic component (2.0% of free magnetic ions of S = 1/2) from the raw magnetization.The field-induced transition at Hc1 should be caused by the level crossing of the singlet and one of triplet states, following the relation Hc1 = /gB, where is the gap in zero field.However, the observed value of Hc1 is much smaller than 18.5 T calculated from the neutron data ( = 2.3 meV).This observation indicates that some other states like a twotriplet bound state causes the level crossing at Hc1.When the magnetic field is increased up to 7 T, the broad maximum of Cp/T shifts gradually to lower temperature, indicating reduction of the spin gap owing to Zeeman splitting of the excited triplet states (Figure 6(a)).The broad maximum in Cp(T)/T changes into a cusp at and above 11 T (Hc1), corresponding to the field-induced transition to the BEC state.When the magnetic field is further increased, the peak associated with the phase transition develops and shifts systematically to higher temperatures.The transition temperatures TN at 11 T and 14 T are 2.3 K and 3.3 K, respectively.The growth of the peak area at TN is consistent with the BEC scenario.Nuclear magnetic resonance (NMR) is a useful tool to clarify the local symmetry.It is revealed that none of the Cu, Cl, and La sites have the tetragonal symmetry [31], which is incompatible with the initially reported tetragonal structure with P4/mmm [11].For example, the Cu-and Cl-NMR spectra could not be accounted for by C4 symmetry along the c direction.Furthermore, transmission electron microscopy (TEM) measurements demonstrated superlattice reflections indicating the doubling along a-and b-axes (2a  2b).From the obtained spectra, a single-site occupation without site disorder is indicated for both Cu and Cl, in contradiction to the early neutron diffraction study [22].In addition, the Nb hyperfine coupling constant for H ||c is as large as 2.84(8) T/B, suggesting a strong Cu-O-Nb hybridization.Thus, the in-plane magnetic interactions come not only by the Cu-Cl-Cl superexchange pathways but also by the Cu-O-O-Cu super-superexchange pathways.Figure 8 shows two possible superstructures of the CuCl layer, proposed on the basis of the NMR and TEM results [31].
A single crystal X-ray diffraction is essential to determine the real crystal structure.However, the difficulty is that one cannot directly obtain the single crystal of (CuCl)LaNb2O7 by a conventional high-temperature flux method, because it is a metastable phase.Nevertheless, the (CuCl)LaNb2O7 single crystals could be obtained topochemically through the ion-exchange reaction of the CsLaNb2O7 single crystals [32,33].The CsLaNb2O7 crystal was grown by a self-flux method [34].As shown in Figure 9, transparent, plateshaped crystals with a typical size of 0.5  0.5  0.1 mm 3 are obtained.The crystals of CsLaNb2O7 were embedded in CuCl2 powder, for the ion exchange at 340 °C for 1 week.This yielded dark-green single crystals of (CuCl)LaNb2O7.Energy dispersive spectroscopy (EDS) shows the absence of Cs in the crystal after the reaction.The time-dependent study revealed that, despite the use of large single crystal and low temperature for reaction, the diffusion occurs surprisingly fast, at a rate of 20 m h -1 .
The crystal structure of (CuCl)LaNb2O7 was refined using single crystal X-ray diffraction and high-resolution powder neutron diffraction data, and Figure 9  The first principles calculations based on the new structure [32] yielded the superexchange interactions (see Figure 10(a) and Table 1).Interestingly, the 4th NN interaction, J4, of the Cu-Cl-Cl-Cu exchange path is the strongest and is AFM.The other 4th NN interaction, J4′ is also AFM, but is much weaker than J4 (J4′/ J4 = 0.18).This is understood as J4 has a larger Cu-Cl-Cl angle and a shorter Cl-Cl distance than J4′ (164.9 and 3.835 Å for J4 vs 156.0 and 4.231 Å for J4′).The other major J′s are FM.The relative strength of the six exchange interactions is   The strongest AFM J4 gives the spin-singlet dimers in (CuCl)LaNb2O7.The distance of Cu-Cl-Cl-Cu (J4 bond) is 8.533 Å, which is in good agreement with the intradimer distance obtained from the INS analysis (Figure 4b).Using the set of J values, the INS data was analyzed again and the better agreement was obtained [32].Most remarkably, the 4th NN Cu ions form spin singlet arranged in a staggered manner in the ab plane (Figure 10a) and the coupling between them is primarily ferromagnetic.Therefore, the spin lattice is best described as ferromagnetically coupled Shastry-Sutherland quantum spin singlet [32,35].In otehr words, (CuCl)LaNb2O7 is a ferromagnetic counterpart of SrCu2(BO3)2.
The color of the cupric bromide is brown.The structure of (CuBr)LaNb2O7 has the tetragonal P4/mmm space group (a = 3.90 Å and c = 11.70Å), without any superstructure.When this structure is assumed when refined, the Br atoms exhibits an extraordinarily large displacement parameter Uiso = 0.087 Å 2 .As in the case of (CuCl)LaNb2O7, a deviation from the tetragonal P4/mmm structure is inferred from the NMR/NQR experiments [36].
The Cl-to-Br replacement resulted in the magnetic order.Figure 3 shows (T) of this material [37].The CW fitting gives  = -5.1 K.The (T) shows a round maximum at Tmax = 36 K, which is much larger than  in magnitude, suggesting competing AFM and FM interactions.A tiny kink is seen at 30 K, right below Tmax, which is ascribed to magnetic order.Consistently, the specific heat measurements show a peak at 32 K.The neutron diffraction experiments demonstrated a collinear antiferromagnetic (CAF) order with a modulation vector of (1/2 0 1/2).The estimated magnetic moment is 0.60(11) B.The reduced magnetic moment probably results from quantum fluctuations.Figure 11 shows the high-field magnetization M(H) measured at 1.3 K.For 0 < H < 30 T, M(H) increases linearly with magnetic fields, which is followed by non-linear growth.The upward curvature should be caused by the gradual suppression of zero-point oscillations by the external field and is expected to be observed in the framework of spin-wave theory.On the assumption of the J1-J2 model [17], J1/kB and J2/kB are estimated as -35.6 K and 41.3 K, giving  = |J2/J1| = 1.10, which is located within the range of the CAF phase in the J1-J2 model (Figure 2).

Cu(Cl, Br)La(Nb, Ta)2O7
Two kinds of solid solutions have been investigated, against Br-for-Cl [38,39] and Ta-for-Nb [39,40] substitution.For (CuCl1  xBrx)LaNb2O7 (0 ≤ x ≤ 1), the a-axis linearly increases with x, while the c-axis decreases.The temperature dependence of the magnetic susceptibility (Figure 12   Muon spin relaxation (SR) offers a unique opportunity in detecting a static magnetic order at high sensitivity.Figure 13 shows the Zero-field (ZF) SR spectra of (CuCl1-xBrx)LaNb2O7 [39].The x = 1 spectrum exhibits a long-lived precession below TN, indicating the existence of a well-defined local field at the muon site expected for homogeneous long-range order.With decreasing x, the internal field at ~ 2 K becomes increasingly inhomogeneous as shown by the damping of the oscillation.The x = 0.05 also exhibits a long-range magnetic order at 7 K, in spite of the spingapped behavior in magnetic susceptibility and magnetization.The inhomogeneous static local field was observed in the low x range, a characteristic behavior often seen in dilute alloy spin-glass systems [41].The change in the initial damping rate between x = 0.33 and 0.05 indicates that the size and/or spatial uniformity of the ordered moment changes between these two Br concentrations.In fact, the neutron scattering experiments for x = 0.05 reveals the CAF ordered structure with a magnetic moment being significantly reduced to 0.2(1) B.The long-range magnetic order induced by only 5%-Br doping and the significantly reduced ordered moment indicates that (CuCl)LaNb2O7 is located in the vicinity of the quantum phase boundary adjacent to the ordered state.
Contrasting behaviors are observed in the Nb-site substituted system, (CuCl)La(Nb1-yTay)2O7 (0 ≤ y ≤ 1) [40].Reflecting similar ionic radii between Nb 5+ and Ta 5+ , the lattice parameters are almost constant with y.However, the magnetic ground state is affected significantly by the Nb-to-Ta substitution.The magnetic susceptibility of (CuCl)LaTa2O7 exhibits a broad maximum at Tmax = 11.5 K, which is close to 16.5 K in (CuCl)LaNb2O7.However, it exhibits only a slight decrease below Tmax, indicating a magnetic ground state.The neutron diffraction and SR experiments (Figure 13(b)) evidence a magnetic order at 7 K, with the reduced magnetic moment of 0.69(1) B and the propagation vector of (1/2 0 1/2).Unlike the (Cl, Br) solid solution, the spin-singlet state is quite robust against the Ta substitution.Substantial substitution up to y ~ 0.4 is necessary to induce the magnetic order.It is remarkable that the spin disordered phase persists up to y = 0.9.This indicates the occurrence of the phase separation.In this range, TN remains almost unchanged against the Ta concentrations (Figure 14).The volume fraction of the spin-disordered phase increases with decreasing y.It should be noted that the observed phase separation is not caused by chemical inhomogeneity because of uniform distribution of the Nb and Ta atoms as revealed by TEM/EDS images.The difference in magnetic behaviors between A-and B-site solid solutions is accounted for by the chemical randomness; the superexchange interactions mediated by halogen atoms should be larger than those mediated the non-magnetic perovskite block.Some theories on 1D systems showed the staggered spin-spin correlations in the vicinity of spin vacancies, which results in the emergence of the ordered phase as observed in CuGeO3 [42] and SrCu2O3 [43].By analogy, the induced magnetic order by a small amount of Br substitution in (CuCl)LaNb2O7 may be associated with staggered correlations induced around Br ions.

(CuBr)Sr2Nb3O10
(CuBr)Sr2Nb3O10 is a triple-layered compound, prepared by the ion-exchange reaction of RbSr2Nb3O10 with CuBr2 at 350 °C for 1 week.The crystal structure of (CuBr)Sr2Nb3O10 at room temperature is tetragonal (a = 3.91069(4) Å, c = 16.0207(3)Å) with the space group P4/mmm [44,45].As in the double layer compounds, a random displacement of the Br atoms from the ideal site is pointed out.In comparison with the double-layered system, the c axis is expanded by ~ 4 Å corresponding to the one-perovskite unit.Thus, the enhanced twodimensionality is expected in magnetism.implies that FM interactions are dominant over the AFM ones, which is in contrast to the negative  for the double layered compounds: -9.6 K for (CuCl)LaNb2O7 [21] and -5.1 K for (CuBr)LaNb2O7 [37].Instead of a broad maximum in (T) typically seen for low-dimensional spin systems, (T) increases with reducing T until it flattens out below 5 K.A noticeable anomaly associated with a long-range magnetic order is not seen.However, specific heat measurements in Figure 15(b) show successive phase transitions at 9.3 K (Tc1) and 7.5 K (Tc2).
Non-discontinuous character and the absence of T hysteresis in Cp(T) as well as (T) indicate the 2nd-order phase transitions.Successive phase transitions are characteristic phenomena observed in spin frustrated systems such as CsNiCl3 and CsCoCl3 [46].Application of magnetic fields finally merges two transitions together at around 3 T.At higher field, the transition temperature has a dome-shaped boundary peaking at 5 T, as shown in Figure 16.
Zero-field SR spectra demonstrate a long-range magnetic order below Tc2, but a paramagnetic state for Tc2 < T < Tc1 [45].Thus, the transitions at Tc1 and Tc2 are, respectively, structural and magnetic.
The most prominent observation in (CuBr)Sr2Nb3O10 is a 1/3 magnetization plateau in the magnetization curve (see Figure 17).The plateau becomes obscured with increasing T and vanishes at 9 K, in agreement with the phase boundary determined by heat capacity measurements.Since the magnetization curves at 4.2 K and 1.3 K are nearly identical, nonflat plateau is not due to thermal effects.Dzyaloshinskii-Moriya interactions and/or staggered g tensors are a possible origin as discussed in SrCu2(BO3)2 [47].The 1/3 magnetization plateau has been theoretically predicted for various triangle-based lattices.Experimentally, triangular-and diamond-lattice antiferromagnets such as Cs2CuBr4 [48] and Cu3(CO3)2(OH)2 [49] exhibit the 1/3 plateau.However, for commensurability reasons, 1/2 and 1/4 plateaus are naturally expected for the square-based systems [50].The exception is found in SrCu2(BO3)2 with the Shastry-Sutherland lattice, which is due to the stronger 2nd NN interdimer interaction than the NN interdimer one [27].Oshikawa et al. formulated the quantization condition [51]; p(S  m) = integer, where p and m are the period of the spin state, the magnetization per site, respectively.For S = 1/2, the minimal necessary condition of the 1/3 plateau (m = 1/6) is p = 3.Since (CuBr)Sr2Nb3O10 has one Cu 2+ ion in its chemical unit cell (p = 1), the breaking of translational symmetry is needed to satisfy the quantization conditions.Based on these considerations, we initially proposed two possible in-plane magnetic structures with a propagation vector of (1/3 0) and (1/3 1/6) as shown in Figure 17(b) and 17(c), respectively [44].
In order to observe the magnetic structure at zero field and at the 1/3 plateau, the neutron powder diffraction experiments were carried out at ILL in Grenoble [52]. Figure 18 shows the magnetic diffraction patterns without magnetic field at 8 K and 2 K after subtraction of the 26 K nuclear data.The magnetic Bragg reflections were discernible below Tc2, while no magnetic reflections were detected above Tc2.The magnetic peaks can be indexed with the propagation vector of (0 3/8 1/2), and the magnetic structure is shown in Figure 19.The Cu moments rotate around the c-axis within the ab plane, and the helix propagates along the baxis with a rotation of 135° between adjacent moments.The helical chains are coupled ferromagnetically along the a-axis.The ordered moment at 2 K is 0.79(7) B/Cu 2+ .
Figure 18.The low angle region of the magnetic diffraction patterns for (CuBr)Sr2Nb3O10 at 8 and 2 K after subtraction of the 26 K nuclear pattern [52].
Ion-Exchange Reactions for Two-Dimensional Quantum Antiferromagnetism 25

(CuBr)A2B3O10 (A = Ca, Sr, Ba, Pb; B = Nb, Ta)
A series of triple layered copper bromides, (CuBr)A2B3O10, was synthesized [45].Since the Rb compounds could not be formed for A = Pb and Ba, CsA2B3O10 was prepared as a precursor.A′Pb2Ta3O10 (A′ = Rb, Cs) could not be isolated because of formation of Pb3Ta4O13 as a main phase.The ion-exchange reaction using CuBr2 successfully proceeded at 320 -350 °C.From the XRD patterns at room temperature, all the (CuBr)A2B3O10 compounds are found to be isostructural with (CuBr)Sr2Nb3O10.Both a-and c-axes show a linear increase with the ionic radius of A 2+ , except Pb.A deviation from the linear relation for A = Pb is due to the steric effect of the 6s 2 lone pair in Pb [57].There is no B-site dependence because of the similar ionic radii.
The -T curves of (CuBr)Ca2B3O10 exhibit a broad maximum.Tmax, is 15 K for Nb and 22 K for Ta.The Weiss temperature  is positive for all the compounds.(CuBr)Ba2Nb3O10 shows a drastic drop at 5 K, suggesting an antiferromagnetic transition, while its Ta counterpart shows a monotonous temperature dependence, which is similar to that of (CuBr)Sr2Nb3O10.The 1/3 plateau phase can be tuned not only by the A site but also by the B site.In the case of B = Ta, only (CuBr)Ba2Ta3O10 showed a 1/3 plateau with Hc1  T andHc2 = 4.0 T.Although the data available are limited, it is anticipated, in analogy to the Nb case, that the plateau-stabilizing region is shifted to the right in Figure 20(e).Conditions for the appearance of the plateau would come from a subtle balance between the magnetic interactions mediated by Br and those mediated by BO6BO6.

(CuCl)Ca2NaNb4O13
A quadruple layered compound, (CuCl)Ca2NaNb4O13 [58], was prepared by the reaction of RbCa2NaNb4O13 [59] and CuCl2 at 320 °C for 1 week.Laboratory XRD patterns of both RbCa2NaNb4O13 and (CuCl)Ca2NaNb4O13 at room temperature could be indexed in the tetragonal cell with the lattice parameters a = 3.869 Å and c = 18.859Å, and a = 3.866 Å and c = 19.608Å, respectively.The TEM and synchrotron powder diffraction experiments revealed superlattice reflections that are correlated with the original cell by 2a  2a  c (Figure 21).Such a structural deviation from the ideal structure is reasonable in light of the tolerance factor (t = [rA  rO]/√2[rB  rO]).Perovskite compounds with the ideal cubic structure such as SrTiO3 have t = 1.When t is smaller than unity, coherent octahedral tilting takes place.Indeed, t = 0.955 for (CuCl)Ca2NaNb4O13, implying the octahedral tilting in the perovskite blocks.However, the precursor exhibited very weak and diffuse superlattice reflections.The difference in the TEM patterns would be related to the difference in the bonding nature connecting adjacent perovskite blocks; in RbCa2NaNb4O13, the adjacent Ca2NaNb4O13 blocks are weakly bound via the Rb cations, while in (CuCl)Ca2NaNb4O13, the adjacent perovskite blocks are connected covalently via the edge-shared CuCl4O2 octahedra, which results in a long-ranged coherent octahedral tilting.In order to find the most reasonable space group for (CuCl)Ca2NaNb4O13, Aleksandrov's analysis of symmetry reduction in response to octahedral tilting in layered perovskites was employed [60].Among possible space groups, only I4/mmm with (++0) tilt met the extinction conditions derived from the TEM and XRD results.Here, + and 0 denote, respectively, in-phase tilt and no tilt in Glazer's notation [61].The temperature dependence of magnetic susceptibility for (CuCl)Ca2NaNb4O13 did not show an anomaly associated with magnetic ordering, which is also supported by SR and specific heat measurements.FM interactions are dominant over AFM interactions, similar to the triple-layered CuBr compounds [45].Figure 22 shows the magnetization curve measured at 1.3 K.The M(H) does not show either a fractional magnetization plateau or other fieldinduced phase transitions, but a rather slow increase.The M(H) does not saturate even at 57 T, implying that the in-plane interaction is fairly strong and that there is a strong competition between FM and AFM interactions.

Conclusion
We have demonstrated that the ion-exchange reaction using the DJ phase that involves the simultaneous co-exchange of metal cations and halide anions is effective approach to design a new class of two-dimensional quantum spin antiferromagnets, with tuned in-plane magnetic interactions and a variety of quantum phases.A series of (CuX)An-1BnO3n+1 with the S = 1/2 square lattice exhibits novel quantum spin phenomena such as spin-liquid state, quantized magnetization plateau, quantum phase separation, and field-induced BEC state.They are caused by the strong competition between FM and AFM interactions.Table 2 summarizes the structural and magnetic properties in (CuX)An-1BnO3n+1.Note that most studies on spin frustrated magnetism has been focused so far on the systems composed of only AFM interactions.It is only recently that attentions have been paid to frustrated systems including FM interactions from both experimentally and theoretically points of view.We hope that the (CuX)An-1BnO3n+1 system will continue to contribute to the development of new physics of the frustrated spin systems in the future.The ion-exchange reaction can be extended to other compounds with transition metals with different spin quantum number, for example, (MCl)LaNb2O7 (M = Mn 2+ , Fe 2+ , etc.) [6265] and (NiCl)Sr2Ta3O10 [66].Reflecting the classical nature of magnetic moment, (MCl)LaNb2O7 (M = Co, Fe, Mn) exhibit antiferromagnetic order, but several anomalous behaviors have been still observed due to geometrical frustration.The nickelic chloride with S = 1 undergoes the successive magnetic phase transitions with an intermediate phase characterized by a partial magnetic order.The advantage of the ion-exchange reactions is that, once one finds an appropriate precursor or hosts, any desired spin lattices can be constructed in principle.Using this topochemical strategy, various magnetic lattices (triangle, kagomé, pyrochlore, etc.) might be prepared.

Figure 1 .
Figure 1.Ion-exchange reaction involving the insertion of copper halide layer into the interlayer spaces of the Dion-Jacobson type layered perovskites A´[An-1BnO3n+1] for (a) n = 2 and (b) n = 3. (c) Local coordination environment around the copper atom.J1 and J2 denote nearest-neighbor and 2nd nearestneighbor exchange constants, respectively.

Figure 5 .
Figure 5. Magnetization curve measured at T = 1.3 K and its derivative [25].Arrows point to the transition fields.For Hc1 < H, the magnetization gradually increases up to the saturated magnetization.This intermediate state is stable over a wide field range (Hc2 -Hc1 = 19.8T), which is due to substantial interdimer interactions.No magnetization plateaus are observed, unlike SrCu2(BO3)2 with 1/8, 1/4, and 1/3 plateaus[26,27] and NH4CuCl3 with 1/4 and 3/4 plateaus[28].Such a difference is understood in terms of competition between localization and delocalization among excited triplets.The magnetization is correlated with the total number of magnons N through the relation M = gBN.The chemical potential of the S z = 1 magnons is described as  = gB(H -Hc1).The transverse components of the exchange interactions generate hopping of the magnons, while the longitudinal components generate repulsion of the magnons.When the delocalization term is dominant as in the present material, the Bose-Einstein condensation (BEC) of excited triplets, or magnons, occurs.On the other hand, when the localization term is dominant, magnons are crystallized in an ordered fashion to minimize the repulsive interactions, leading to a plateau in the magnetization curve.

Figure 6 (
Figure6(a) shows the temperature dependence of total specific heat Cp (in the inset) and Cp/T under applied magnetic fields ranging from 0 to 14 T[29].The zero field data reveal no anomaly associated with a long-range magnetic ordering, in consistent with magnetic susceptibility and INS experiments.The Schottky anomaly is seen at around 7 K.After subtracting the lattice contribution T 3 ( = 0.717 mJ/K 4 mol), the magnetic contribution Cm is obtained, and the subsequent T-integration of Cm/T gives the magnetic entropy Sm of 1.1 J/mol K, which is 13% smaller than the total magnetic entropy (Rln2) for 1mol of S = 1/2.

Figure 6 .
Figure 6.(a) Cp/T for (CuCl)LaNb2O7 collected under several fields.The dotted curve represents the phonon contribution T 3 .The inset shows the Cp vs T plots.Arrows denote the transition temperature [29].(b) Low-temperature magnetizations measured at various external magnetic fields up to 14 T [29].
Figure 6(b) shows the temperature dependence of magnetization at various constant magnetic fields.A cusp-like anomaly above 10 T shows the occurrence of the BEC transition.The increase in magnetization with decreasing temperature below TN corresponds to the increased magnon density on the basis of the BEC scenario.Shown in Figure 7 is a T vs H phase diagram.All Cp(T), M(T) and M(H) data agree well with one another.A theoretical curve based on the Hartree-Fock approximation gives the power low behavior [Hc(T) -Hc(0)]  T  with the critical exponent  = 3/2 [30].

Figure 7 .
Figure 7. Phase boundary between spin-singlet state and the BEC state in (CuCl)LaNb2O7 determined from the results of M(T), M(H), and Cp(T).The solid line represents a theoretical curve described in the text [29].
(b)  shows the determined structure[32].(CuCl)LaNb2O7 adopts the orthorhombic 2a  2b  c superstructure with the Pbam space group.The lattice constants at 2 K are a = 7.7556 Å, b = 7.7507(5) Å, and c = 11.7142(4)Å.The closeness of the in-plane constants is the reason why earlier low-resolution X-ray/neutron studies gave a tetragonal cell.In the new structure, the NbO6 octahedra are strongly tilted around the a-axis in a staggered manner.The tilting pattern of the NbO6 is correlated with the positions of both the Cu and Cl atoms.In particular, the Cl atoms move significantly along the b direction and slightly along a direction from their tetragonal position.The Cu ions occupy the 4h site are displaced along the a-and b-axis, yielding different Cu-Cu distances of 3.626 Å and 4.129 Å along the b-axis and 3.885 Å along the a-axis.The Cu ions take octahedral coordination against two oxide ions with a distance of 1.865 Å and against four chlorine ions with two shorter bonds (2.386 Å and 2.389 Å) and two longer bonds (3.136 Å and 3.188 Å).When the local z and x axes for each Cu 2+ are taken along the Cu-O and the short Cu-Cl bonds, respectively, the overall symmetry of the magnetic orbital including the ligand p orbitals has the z 2 -x 2 character, making the exchange interactions in the CuCl layer highly anisotropic.

Figure 8 .
Figure 8. (a, b) Superstructures and (c, d) their corresponding exchange paths for the CuCl layer, suggested by NMR/NQR and TEM experiments.The yellow/orange and blue circles represent the Cl and Cu ions, respectively [31].The dashed lines in (a) and (b) indicate the unit cell for the superstructure.In the structure (a), the yellow and orange circles represent Cl atoms above and below the Cu layer, respectively.

Figure 14 .
Figure 14.Magnetic phase diagram as a function of temperature and concentration.P, S and CAF stand for the paramagnetic state, the spin-singlet state, and the collinear type AFM state, respectively [40].

Figure 15 (
Figure 15(a) shows the temperature dependence of the magnetic susceptibility for (CuBr)Sr2Nb3O10 measured at H = 0.1 T. The CW fitting gives  = 20.9(3)K.The positive 
Figure 20  shows the magnetizations normalized by the saturation magnetizations.The 1/3 plateau state is remarkably robust against the chemical substitution.As seen in Figure20(c), (CuBr)Pb2Nb3O10 exhibits a 1/3 plateau between Hc1 = 1.7 T and Hc2 = 5.8 T. The narrowed plateau region of the plateau (4.1 T) indicates that the A-site replacement by the larger cation destabilizes the plateau phase.Further increasing the size of the A-site cation leads to the disappearance of the plateau; no plateau was observed in (CuBr)Ba2Nb3O10 (Figure20(d)).Decreasing the size of the A-site (vs.Sr) produces the same results; no plateau was observed in (CuBr)Ca2Nb3O10 (Figure20(a)).As shown in Fig.20(e), the Hc2 Hc1 vs. rA 2+ plot clearly demonstrates an intimate correlation between rA 2+ and the stability of the plateau phase.

Figure 20 .
Figure 20.(a)-(d) Magnetization curves measured for (CuBr)A2B3O10.(e) The compositional dependence of the plateau width Hc2 -Hc1 as a function of the ionic radius of the A site [45].

Table 1 .
[32]ange paths for up to the fourth NN interactions in (CuCl)LaNb2O7 and the corresponding coupling constants relative to the strongest AFM interaction J4[32].

Table 2 .
Space group, magnetic features, Neel temperature, TN, spin-gap energy, kB and Weiss temperature,  for (CuX)An