Microwave Hydrothermal and Solvothermal Processing of Materials and Compounds

s of Papers, 240th ACS National Meeting, Boston, MA, United States, August 2226, 2010, CATL-48. Huang, J.; Xia, C.; Cao, L.; Zeng, X. (2008). Facile microwave hydrothermal synthesis of zinc oxide one-dimensional nanostructure with three-dimensional morphology. Materials Science and Engineering B, 150, 187-193. Microwave Hydrothermal and Solvothermal Processing of Materials and Compounds 133 Katsuki, H.; Furuta, S.; Watari, T.; Komarneni, S. (2005). ZSM-5 zeolite/porous carbon composite: Conventionaland microwave-hydrothermal synthesis from carbonized rice husk. Microporous and Mesoporous Materials, 86(1-3), 145-151. Katsuki, H. (2009). Sintering of -Fe2O3 particles prepared from microwave-hydrothermal reaction. Funtai oyobi Funmatsu Yakin, 56(12), 738-743. Kim, G.B.; Kim, H.G.; Kim, Ji.Y.; Park, S.H. (2011). Preparation method of transition metal oxide/graphene composite using microwave-hydrothermal process and its use in energy-storage devices and gas sensors. 17 pp., KR 2011121584. Koga, N.; Kimizu, T. (2008). Thermal decomposition of indium(III) hydroxide prepared by the microwave-assisted hydrothermal method. Journal of the American Ceramic Society, 91(12), 4052-4058. Komarneni, S.R; Pidugu, Quing Hua Li; Roy, R. (1995). Microwave-hydrothermal processing of metal powders. J. Mater. Res., 10(7), 1687-1692. Komarneni, S.; Hussein, M. Z.; Liu, C.; Breval, E.; Malla, P. B. (1995). Microwavehydrothermal processing of metal clusters supported in and/or on montmorillonite. European Journal of Solid State and Inorganic Chemistry, 32(7/8), 837-849. Komarneni, S. (2003). Nanophase materials by hydrothermal, microwave-hydrothermal, and microwave-solvothermal methods. Current Science, 85(12), 1730-1734. Komarneni, S.; Katsuki, H. (2002). Nanophase materials by a novel microwavehydrothermal process. Pure Appl. Chem., 74(9), 1537–1543. Komarneni, S.; Katsuki, H. (2010). Microwave-hydrothermal synthesis of barium titanate under stirring condition. Ceramics International, 36(3), 1165-1169. Komarneni, S.; Noh, Y.D.; Kim, J.Y.; Kim, S.H.; Katsuki, H. (2010). Solvothermal/hydrothermal synthesis of metal oxides and metal powders with and without microwaves. Zeitschrift fuer Naturforschung, B: A Journal of Chemical Sciences, 65(8), 1033-1037. Kramer, J.W.; Parhi, P.; Manivannan, V. (2008). Microwave Initiated Hydrothermal Synthesis of Nano-Sized Complex Fluorides, KMF3 (Zn, Mn, Co and Fe). Abstracts, 43rd Midwest Regional Meeting of the American Chemical Society, Kearney, NE, United States, October 8-11, 2008, MWRM-319. Krishna, M.; Komarneni, S. (2009). Conventionalvs microwave-hydrothermal synthesis of tin oxide, SnO2 nanoparticles. Ceramics International, 35(8), 3375-3379. Krishnaveni, T.; Murthy, S. R.; Gao, F.; Lu, Q.; Komarneni, S. (2006). Microwave hydrothermal synthesis of nanosize Ta2O5 added Mg-Cu-Zn ferrites. Journal of Materials Science, 41(5), 1471-1474. Kuznetsova, V. A.; Almjasheva, O. V.; Gusarov, V. V. (2009). Influence of microwave and ultrasonic treatment on the formation of CoFe2O4 under hydrothermal conditions. Glass Physics and Chemistry, 35(2), 205-209. Lhoste, J.; Rocquefelte, X.; Adil, K.; Dessapt, R.; Jobic, S.; Leblanc, M.; Maisonneuve, V.; Bujoli-Doeuff, M. (2011). A New Organic-Inorganic Hybrid Oxyfluorotitanate [Hgua]2.(Ti5O5F12) as a Transparent UV Filter. Inorganic Chemistry, 50(12), 5671-5678. The Development and Application of Microwave Heating 134 Li, C.; Yu, R.; Ren, T.; Zhang, W. (2011). Microwave hydrothermal-deposition synthesis method for directional nanobar-structured ZnO thin film. 13 pp. CN 102260046. Li, D.; Wang, F.; Zhu, J.-f.; Xue, X.-s. (2011). Synthesis and characterization of GaN nanorods by microwave hydrothermal method and treatment with ammonia. Gongneng Cailiao Yu Qijian Xuebao, 17(2), 218-222. Li, J.; Huang, J.; Yu, C.; Wu, J.; Cao, L.; Yanagisawa, K. (2011). Hierarchically structured snowflakelike WO3.0.33H2O particles prepared by a facile, green, and microwaveassisted method. Chemistry Letters, 40(6), 579-581. Li, W.-h. (2008). Microwave-assisted hydrothermal synthesis and optical property of Co3O4 nanorods. Materials Letters, 62(25), 4149-4151. Li, Z.-Q.; Zhang, L.; Lin, X.-S.; Chen, X.-T.; Xue, Zi-L. (2012). Fast preparation of flower-like PbGeO3 microstructures at low-temperature via a microwave-assisted hydrothermal process. Materials Letters, 68, 344-346. Li, Y.; Liu, H.; Shen, Z.; Hong, Y.; Wang, Z.; Li, R. (2011). Effect of ZnO and CuO sintering additives on the properties of KNN piezoelectric ceramic. Zhongguo Taoci, 47(10), 28-31. Liu, X.; Zhao, W.; Zhang, G.; Sun, K.; Zhao, Y. (2011). Method for treating persistent organic pollutants through microwave hydrothermal reaction. 6 pp., CN 102068782. Liu, Y.-Ya; Leus, K.; Grzywa, M.; Weinberger, D.; Strubbe, K.; Vrielinck, H.; Van Deun, R.; Volkmer, D.; Van Speybroeck, V.; Van Der Voort, P. (2012). Synthesis, Structural Characterization, and Catalytic Performance of a Vanadium-Based Metal-Organic Framework (COMOC-3). European Journal of Inorganic Chemistry, Ahead of Print http://onlinelibrary.wiley.com/doi/10.1002/ejic.201101099/abstract Liu, H.; He, X.-m.; Li, G.-j.; Cai, Zi-j.; Zhu, Z.-f. (2011). Microwave hydrothermal synthesis of AlOOH and Al2O3 hierarchically nanostructured microspheres self-assembled by nanosheets. Gongneng Cailiao, 42(5), 854-857, 861. Liu, X.; Zhao, W.; Sun, K.; Zhang, G.; Zhao, Y. (2011). Dechlorination of PCBs in the simulative transformer oil by microwave-hydrothermal reaction with zero-valent iron involved. Chemosphere, 82(5), 773-777. Lu, Y.; Zhang, J. (2003). Development of TiO2-Al2O3 semiconductor-dielectric composite ceramics and investigation on its microwave-absorbing properties. Xiyou Jinshu Cailiao Yu Gongcheng, 32(Suppl. 1), 463-466. Lv, Y.; Liu, Y.; Dai, S.; Shi, S. (2009). Synthesis of Bi0.5Na0.5TiO3 spherical particles by microwave hydrothermal process. 7 pp., CN 101525239. Ma, S.B.; Kim, J.G.; Kim, H.-K.; Choi, H.-R.; Kim, K.-B. (2010). Metal oxide/carbon nanotubes nano-hybrid materials for energy storage applications. Abstracts of Papers, 240th ACS National Meeting, Boston, MA, United States, August 22-26, 2010, FUEL-52. Maksimov, V. D.; Meskin, P. E.; Churagulov, B. R. (2008). Hydrothermal microwave synthesis of finely divided powders of simple and complex zirconium and hafnium oxides. Poverkhnost, (2), 76-82. Moreira, M.L.; Andres, J.; Varela, J.A.; Longo, E. (2009). Synthesis of Fine Micro-sized BaZrO3 Powders Based on a Decaoctahedron Shape by the Microwave-Assisted Hydrothermal Method. Crystal Growth & Design, 9(2), 833-839. Microwave Hydrothermal and Solvothermal Processing of Materials and Compounds 135 Morishima, Y.; Kobayashi, M.; Petrykin, V.; Kakihana, M.; Tomita, K. (2007). Microwaveassisted hydrothermal synthesis of brookite nanoparticles from a water-soluble titanium complex and their photocatalytic activity. Journal of the Ceramic Society of Japan, 115(Dec.), 826-830. Motuzas, J.; Julbe, A.; Noble, R. D.; van der Lee, A.; Beresnevicius, Z. (2006). Rapid synthesis of oriented silicalite-1 membranes by microwave-assisted hydrothermal treatment. J. Microporous and Mesoporous Materials, 92(1-3), 259-269. de Moura, A. P.; Lima, R. C.; Moreira, M. L.; Volanti, D. P.; Espinosa, J. W. M.; Orlandi, M. O.; Pizani, P. S.; Varela, J. A.; Longo, E. (2010). ZnO architectures synthesized by a microwave-assisted hydrothermal method and their photoluminescence properties. Solid State Ionics, 181(15-16), 775-780. de Moura, A. P.; Lima, R. C.; Paris, E. C.; Li, M. S.; Varela, J. A.; Longo, E. (2011). Formation of nickel hydroxide plate-like structures under mild conditions and their optical properties. Journal of Solid State Chemistry, 184(10), 2818-2823. Muraza, O.; Rebrov, E.V.; Chen, J.; Putkonen, M.; Niinistoe, L.; de Croon, M.H.J. M.; Schouten, J.C. (2008). Microwave-assisted hydrothermal synthesis of zeolite Beta coatings on ALD-modified borosilicate glass for application in microstructured reactors. Chemical Engineering Journal, 135(Suppl. 1), S117-S120. Nyutu, E.K.; Chun-Hu Che; Dutta, P.K.; Suib, S.L. (2008). Effect of Microwave Frequency on Hydrothermal Synthesis of Nanocrystalline Tetragonal Barium Titanate. J. Phys. Chem. C, 112, 9659–9667. Obata, S.; Kato, M.; Yokoyama, H.; Iwata, Y.; Kikumoto, M.; Sakurada, O. (2011). Synthesis of nano CoAl2O4 pigment for ink-jet printing to decorate porcelain. Journal of the Ceramic Society of Japan, 119(Mar.), 208-213. Pan, G.-T.; Lai, M.-H.; Juang, R.-C.; Chung, T.-W.; Yang, T.C.-K. (2011). Preparation of Visible-Light-Driven Silver Vanadates by a Microwave-Assisted Hydrothermal Method for the Photodegradation of Volatile Organic Vapors. Industrial & Engineering Chemistry Research, 50(5), 2807-2814. Parhi, P.; Kramer, J.; Manivannan, V. (2008). Microwave initiated hydrothermal synthesis of nano-sized complex fluorides, KMF3 (M = Zn, Mn, Co, and Fe). Journal of Materials Science, 43(16), 5540-5545. Paskocimas, C.A.; Longo da Silva, E.; Volanti, D.P.; Varela, J.A.; Silva Junior, W.; Silva, W.; Boeing, E. (2009). Process for preparation of titanium-based nanometer pigments by hydrothermic preparation aided with microwaves. Braz. Pedido PI, 19 pp., BR 2008001228. Paula, A.J.; Parra, R.; Zaghete, M.A.; Varela, J.A. (2008). Synthesis of KNbO3 nanostructures by a microwave assisted hydrothermal method. Materials Letters, 62(17-18), 2581-2584. Pires, F. I.; Joanni, E.; Savu, R.; Zaghete, M. A.; Longo, E.; Varela, J. A. (2008). Microwaveassisted hydrothermal synthesis of nanocrystalline SnO powders. Materials Letters, 62(2), 239-242. The Development and Application of Microwave Heating 136 Prado-Gonjal, J.; Villafuerte-Castrejon, M. E.; Fuentes, L.; Moran, E. (2009). Microwavehydrothermal synthesis of the multiferroic BiFeO3. Materials Research Bulletin, 44(8), 1734-1737. Praveena, K.; Sadhana, K.; Murthy, S.R. (2010). Microwave-hydrothermal synthesis of Ni0.53Cu0.12Zn0.35Fe2O4/SiO2 nanocomposites for MLCI. Integrated Ferroelectrics, 1


Introduction
Hydrothermal synthesis (or hydrothermal method) includes the various techniques of fabrication or crystallizing substances from high-temperature aqueous solutions at high vapor pressures. In case of crystallization processes, the hydrothermal synthesis can be defined as a method of synthesis of single crystals that depends on the solubility of minerals in hot water under high pressure. The crystal growth is performed in an apparatus consisting of a steel pressure vessel called autoclave, in which a nutrient is supplied along with water. A gradient of temperature is maintained at the opposite ends of the growth chamber so that the hotter end dissolves the nutrient and the cooler end causes seeds to take additional growth.
Nowadays, combinations of different techniques are very common and the hydrothermal method is not an exception. Hydrothermal hybrid techniques are frequently applied for synthesis of materials (including nanomaterials) and chemical compounds, mainly inorganics. In order to additionally enhance the reaction kinetics or the ability to make new materials, a great amount of work has been done to hybridize the hydrothermal technique with microwaves (MW) (microwave-hydrothermal processing), electrochemistry (hydrothermalelectrochemical synthesis), ultrasound (hydrothermal-sonochemical synthesis), mechanochemistry (mechanochemicalhydrothermal synthesis), optical radiation (hydrothermal-photochemical synthesis), and hot-pressing (hydrothermal hot pressing) (Suchanek & Riman, 2006). Hydrothermal method itself, microwave-hydrothermal and microwave-solvothermal methods are, in particular, truly low-temperature methods for the preparation of nanophase materials of different sizes and shapes. These methods save energy and are environmentally friendly, because the reactions take place in closed isolated system conditions. The nanophase materials can be produced in either a batch or continuous process using the above methods. In contrast to the conventional heating hydro/solvothermal method, which requires a long time (typically half to several days) and high electric power (over a thousand Watts), microwave-assisted heating is a greener approach to synthesize materials in a shorter time (several minutes to hours) and with lower power consumption (hundreds of Watts) as a consequence of directly and uniformly heating the contents. Particular aspects of these techniques were examined in several reviews (Shangzhao Shi & Jiann-Yang Hwang, 2003;Komarneni, 2003;Komarneni & Katsuki, 2002) and a book chapter (Guiotoku et al., 2011).
In this Chapter, we try to describe briefly main aspects of hydro/solvothermal processes under simultaneous microwave heating (H-MW or S-MW). Reactions, carried out by consecutive application of hydro/solvothermal and microwave treatment, are out of scope of this study.

Typical equipment
Typical commercial equipment, used for MW hydro/solvothermal processing, is shown in Fig. 1. Its cost is usually about 30,000 USD. Several reports describe also home-made combinations of MW-heating and hydro/solvothermal reactions.

Inorganic compounds
The H-MW method was used for preparation of free or supported elemental metals (Cu, Ni, Co, Ag) long ago (Komarneni et al., 1995). Thus, microwave-hydrothermal processing in combination with polyol process was used to prepare Ag o -, Pt o -or Pd o -intercalated montmorillonite (Komarneni, Hussein, et al., 1995). Sub-nanometer metal clusters were introduced into the interlayers while some larger metal particles of 5-100 nm were crystallized on the external surfaces. The small metal clusters in the interlayers and on the external surfaces may be useful in certain catalytic applications. The reduction of chlorocomplexes of gold(III) from muriatic solutions by nanocrystal powders of palladium and platinum at 110 and 130 o C under H-MW conditions was studied, revealing Au-Pd and Microwave Hydrothermal and Solvothermal Processing of Materials and Compounds 109 Au-Pt bimetallic particles with a core-shell structure according to the scheme shown in Fig. 2 (Belousov et al, 2011). The obtained particles had a core of the metal reductant covered with a substitutional solid (Au, Pd) solution in case of palladium, and isolated by a gold layer in the case of platinum. It was shown by the example of the Au-Pd system that the use of microwave irradiation allowed one not only to accelerate the synthesis of particles but also to obtain more homogeneous materials in comparison with conventional heating. In addition, magnetic FeNi3 nanochains were synthesized by reducing iron(III) acetylacetonate and nickel(II) acetylacetonate with hydrazine in ethylene glycol solution without any template according to the mechanism shown in Fig. 3 (Jia et al., 2010). The size of the aligned nanospheres in the magnetic FeNi3 chains could be adjusted from 150 to 550 nm by increasing the amounts of the precursors. Magnetic measurement revealed that the FeNi3 nanochains showed enhanced coercivity and saturation magnetization. As an example of core-shell-type gold nanoparticles, the Au/SnO2 core-shell structure was synthesized using the H-MW method (Yu & Dutta, 2011). In MW preparation, the peak position of the UVvisible plasmon absorption band of Au nanoparticles was red shifted from 520 to 543 nm, due to the formation of an SnO2 shell. An SnO2 shell (thickness 10-12 nm) formation was complete within 5 min.  Among metal oxides, TiO2 is the compound, received obviously main attention of researchers due to its numerous applications, in particular in nanostructurized forms. Similar applied methods led to a variety of its distinct crystalline phases obtained in different reports. Thus, nanoparticles of brookite-type TiO2 were prepared at 200 o C (H-MW-heating time 5 min) for 0-60 min starting from the titanium peroxo glycolate complex in basic solution (Morishima et al., 2007). The activity in photodecomposition of oxalic acid by the samples prepared using H-MW technique was higher than activities of brookite nanoparticles prepared by the conventional hydrothermal method. On the contrary, mesoporous titanium dioxide with highly crystalline anatase phase and high surface area, a promising material for energy and environmental application, was obtained  via H-MW route using stable and water-soluble titanium citrate complexes as the precursors. It was shown that the synthesized TiO2 contained mainly anatase phase with crystallite size of 5.0-8.6 nm at various hydrothermal temperatures and durations ranging from 150 to 180 o C and from 30 to 120 min, respectively. The mesoporous nanocrystals synthesized at 180 o C were then used to prepare the TiO2 photoelectrode using screen-printing deposition method. The MW180-120based TiO2 photoanode exhibited a good efficiency on photocurrent conversion and the conversion efficiency was in the range 4.8-7.1%, depending on active area and film thickness. In addition, TiO2 of the shuttle-like rutile phase (10 nm) was prepared using TiCl4 and HCl by H-MW method . Interestingly, the use of H-MW method resulted in the formation of TiO2 nanotubes comprising anatase and rutile phases (Sikhwivhilu et al., 2010). Conventional hydrothermal heating resulted in the formation of tubes with a titanate structure. The two methods yielded tubular structures with similar size dimensions, surface areas and morphologies. The two methods gave 100 % yields of tubes with different degrees of crystallinity. At last, the combination of sonication and H-MW (three methods at once) led to preparing fluorinated mesoporous TiO2 microspheres (500 nm size) . The authors achieved the fabrication of mesoporous TiO2, doping of fluorine by sonication and then hydrothermal treatment of a solution containing TiO2 precursor sol and sodium fluoride.
Zinc oxide, the principal nanotechnological object, was also intensively studied and reported in distinct forms, in particular as nanobar-structured ZnO thin film  (obtained from Zn salt solution (nitrate, chloride, acetate, and/or sulfate) and hexamethylenetetramine solution as raw materials). The wide interest in ZnO has resulted from the following fundamental characteristic features with potential applications in electronic, structural and bio-materials: direct band gap semiconductor (3.37 eV), large excitation binding energy (60 meV), near UV emission and transparent conductivity. ZnO nanorods were synthesized using zinc nitrate and methenamine aqueous solutions in a H-MW process (Shojaee et al., 2010). It was revealed that concentration of precursors and irradiation power displayed significant influences on the compaction and dimensions of the grown nanorods. The 1D ZnO nanostructures and microstructures with a hexagonal crosssection growing in the (0002) direction were obtained under H-MW method (MW 2.45 GHz) at 130 o C for 30 min (de Moura et al., 2010). In addition, the intriguing results were reported  for a facile H-MW route employing the reaction of Zn(NO3)2 · 6H2O and NaOH to synthesize a single-crystal zinc oxide 1D nanostructure with a 3D morphology (Fig. 4). A substantial reduction in the reaction time as well as the reaction temperature is observed compared with the hydrothermal process. Fig. 5 shows a condensed illustration of the authors' strategies in the morphology control of ZnO nanostructures. First, ZnO nuclei generally evolve into nanorods by preferential c-axis ([002] direction) oriented 1D growth. Second, nanorods can be converted into nanowires by a multiple nanorods growth along the [002] direction and simultaneous local attachment of the polar (0001) surfaces or nanospindles by an increase in diameter and local dissolution. Third, multiple nanorods grow from center results in nanodandelions. Fourth, when the crystal growth along the [002] direction is suppressed, nanoslices can be obtained due to quasi 1D growth. Finally, when multiple nanoslices grow further, nanothruster vanes can be formed by selfassembled growth. The MW-hydrothermal mechanism of ZnO nanostructures can be considered as follows (reactions 1-2): Other simple and mixed/complex oxides are extensively reported. Thus, yttria stabilized zirconia (YSZ) is the main material for preparing functional device such as oxygen sensor, solid state oxide fuel cell and high temperature humidity transducer (Zhao et al., 2007). Its nanopowders were prepared by H-MW method with programmable MARS-5 microwave digester in strong basic media at temperature from 100-120 o C and time from 1 h to 5 h, while the temperature is 190-250 o C by conventional hydrothermal heating (CH). The result showed that compared with CH, H-MW can reduce the reaction time, and influence the content of product. The CH and H-MW techniques were also used for production of nanocrystalline zirconium and hafnium dioxides (8-20 nm) at 180 and 250 o C and highly dispersive powders of barium zirconate and hafnate at 150 o C (Maksimov et al., 2008). HfO2 was also H-MW-obtained in a rice form (Eliziari et al., 2009)   The effect of microwave radiation on the formation of smaller and uniform -Fe2O3 powders from FeCl3 solution at 100-140 o C was investigated (Katsuki, 2009). As a practical application, a new red pigment on their basis for porcelain was developed. Structures of tin oxides in different oxidation states are known, for instance SnO2 nanoparticles (Krishna & Komarneni, 2009) or SnO powders (Pires et al., 2008); the last ones were obtained by the H-MW technique using SnCl2 . 2H2O as a precursor. By changing the hydrothermal processing time, temperature, the type of mineralizing agent (NaOH, KOH, or NH4OH) and its concentration, SnO crystals having different sizes and morphologies could be achieved. Plate-like form was found to be the characteristic morphology of growth. CuO with lesscommon sea urchin-like morphology is also known . Single crystalline Co3O4 nanorods (Li, W.-h., 2008)  MoO3 nanoflowers were synthesized on a Si substrate by a facility H-MW method (Wei et al., 2009). The nanoflowers consisted of tens of nanobelts and the nanobelts were about several micrometers in length, several tens to several hundreds of nanometers in width, and tens of nanometers in thickness. As-grown MoO3 nanobelts exhibited a good field-emission property and have great potential for applications in field-emission devices. In case of tungsten oxide, its compounds with different composition were reported, for example monodisperse crystalline WO3 . 2H2O (H2WO4 . H2O) nanospheres, which were prepared by (+)-tartaric acid-assisted H-MW process (Sun et al., 2008), meanwhile the synthesis of crystalline W18O49 with nanosheet like morphology was carried out by low cost MW irradiation method without employing hydrothermal process (Hariharan et al., 2011). The W18O49 nanosheets had the average dimensions of the order of 250 nm in length and around 150 nm in width. The band gap energies to be 3.28 and 3.47 eV for WO3 . H2O and W18O49 samples, respectively. An hierarchically structured WO3 . 0.33H2O "snowflakes" were synthesized by a template-free and H-MW method . Their particles had an oriented growth along six equivalent <100> directions in (001) plane to form the snowflakelike microstructure, which is significantly different from the sample prepared at conventional hydrothermal conditions. Moreover, microwave heating was considered by authors to accelerate the oriented crystal growth along <100> directions. Mixed Mo-W nanostructures are also known. Thus, W0.4Mo0.6O3 and carbon-decorated WOx-MoO2 (x = 2 and 3) nanorods were synthesized (Yoon & Manthiram, 2011). The carbon-decorated WOx-MoO2 nanorods exhibited excellent capacity retention as the carbon provides an elastic matrix for absorbing the volume expansion-contraction smoothly and prevents aggregation of the nanorods during cycling. In addition, solid solutions of titanium-tin oxide TixSn1-xO2 were prepared by H-MW method from a solution containing TiCl3 and SnCl4 . The advantage and contribution of this technique was revealed to be effective reduction of the difference in the formation rate of TiO2 and SnO2, resulting in the precise control of the solid solution composition. Enlarging the crystal size of single-phase, rutiletype TixSn1-xO2 solid solutions can be achieved by annealing in air and the crystal phase is stable at 800 o C.
A series of reports is devoted to lanthanide oxides, in particular to distinct CeO2 nanostructures, for instance virtually nonaggregated, primarily hexagonal CeO2 nanoparticles (Ivanov et al., 2009). In another research (Dos Santos et al., 2008), crystalline CeO2 nanoparticles were prepared by a simple and fast H-MW method at 130 o C for 20 min and then were calcinated at 500 o C for 1, 2 and 4 h. Ceria powders were found to have, in this case, a spherical shape with particle size below 10 nm, a narrow distribution, and exhibit weak agglomeration. In addition, ceria hollow nanospheres composed of CeO2 nanocrystals were synthesized via a template-free H-MW method ). An Ostwald ripening mechanism ( Fig. 6) coupled with a self-templated, self-assembly process, in which amorphous solid spheres are converted to crystalline nanocrystals and the latter selfassemble into hollow structures, was proposed for the formation of these ceria hollow structures, which showed an excellent adsorption capacity for heavy metal ions, for example, 22.4 mg . g -1 for As(V) and 15.4 mg . g -1 for Cr(VI). The authors noted that these ceria hollow nanospheres are also excellent supports for gold nanoparticles, forming a Au/CeO2 composite catalyst. Nanocrystalline Nd2O3 precursor particles were prepared by a H-MW route from a solution containing Nd(CH3COO)3 . H2O (Zawadzki, 2008). Further thermal treatment of the as-prepared precursors resulted in the formation of the well-crystallized Nd2O3 (cubic or trigonal) nanoparticles with fibrous or rod-like morphology (specific surface area 130 m 2 /g). A small number of hydroxides, obtained by H-MW technique, are known. Thus, the CH and H-MW methods were used to synthesize layered double hydroxides (LDHs) . The microwave treatment LDHs (of MgAl and NiMgAl) were found to have higher crystallinity and smaller crystal sizes than the conventional hydrothermal treatment LDHs. It was indicated that the interactions of both OH --CO3 2-and CO3 2--CO3 2-in NiMgAl-LDH, obtained by H-MW technique, are weaker. Also, the thermal decomposition of OHand CO3 2-in the NiMgAl-LDH sample, obtained by H-MW technique, occurred earlier and faster than that of other LDHs. Nanostructural β-Ni hydroxide β-Ni(OH)2 plates were prepared using the H-MW method at a low temperature and short reaction times (de Moura et al., 2011). An NH3 solution was employed as the coordinating agent, which reacts with [Ni(H2O)6] 2+ to control the growth of β-Ni(OH)2 nuclei. It was revealed that the samples consisted of hexagonal-shaped nanoplates with a different particle size distribution. Hierarchically nanostructured -AlOOH microspheres self-assembled by nanosheets were prepared via H-MW technique at 160 o C for 30 min, by using AlCl3 . 6H2O and NaOH as raw materials and cetyltrimethyl ammonium bromide (CTAB) as surfactant, respectively . The morphology-contained -Al2O3 can be obtained through the thermal decomposition of -AlOOH precursors at 500 o C for 2 h. Both of -AlOOH and -Al2O3 microspheres were used to adsorb Congo red from water solution. Cubic-shaped In(OH)3 particles with average size of 0.348 m were precipitated from a mixed aqueous solution of InCl3 and urea by a H-MW method (Koga & Kimizu, 2008). No intermediate compound was found during the course of thermal decomposition from cubic-In(OH)3 to cubic-In2O3. In addition, GaOOH nanorods were synthesized from Ga(NO3)3 via a facile H-MW method (Sun, M. et al., 2010). It was revealed that the as-synthesized sample was consisted of rodlike particles. The results for degradation of aromatic compounds (such as benzene and toluene) in an O2 gas stream under UV light illumination demonstrated that GaOOH nanorods exhibited superior photocatalytic activity and stability as compared to commercial TiO2 in both benzene and toluene degradation.
A considerable number of publications are devoted to H-MW fabrication of oxygen-containing salts, in particular to metal titanates, both simple as BaTiO3 (Sun, W. et al., 2007;Nyutu et al., 2008) and more complex non-stoichiometric as Ba0.75Sr0.25Zr0.1Ti0.9O3 (Chen & Luo, 2008) or Bi0.5Na0.5TiO3. (Lv et al., 2009). Influence of reaction conditions on their synthesis and structures has been studied. Thus, the role of in situ stirring under H-MW conditions on the preparation of barium titanate was investigated . It was established that stirring under H-MW conditions in the temperature range of 150-200 o C led to enhanced crystallization of Ba titanate as revealed by yields compared to the static condition. In addition, stirring led to smaller and more uniform crystals under H-MW conditions compared to those crystallized without stirring. Nanoparticles (20-40 nm) of barium titanate doped with different amounts of Sn 2+ consisting of single phase perovskite structure were synthesized by using a S-MW reaction (Xie et al., 2009). Ceramic bodies (Fig. 7) were obtained using a spark plasma sintering method under argon atmosphere avoiding the disproportionation and oxidation of Sn 2+ in the air. It was considered that Sn 2+ entered into A site of the perovskite formula, ABO3, because the lattice parameters decreased with increasing the amount of doped Sn 2+ . The particle sizes were about 20-40 nm and increased with increasing the amount of doped Sn 2+ . The H-MW method was used also to synthesize crystalline barium strontium titanate (Ba0.8Sr0.2TiO3) nanoparticles (BST, 40-80 nm) in the temperature range of 100-130 o C (Simoes et al., 2010). Comparing this and conventional techniques, it was shown that the H-MW synthesis route is rapid, cost effective, and could serve as an alternative to obtain BST nanoparticles. In addition, as a combination of three techniques, MW-heating was applied in the sonocatalyzed hydrothermal preparation of tetragonal phase-pure lead titanate nanopowders with stoichiometric chemical composition (Tapala et al., 2008). Related niobates, molybdates (for example SrMoO4 ), zirconates, and tungstates were also widely reported. Thus, crystallization of 1D KNbO3 nanostructures (generally unstable due to the natural tendency to form non-stoichiometric potassium niobates) was carried out through the reaction between Nb2O5 and KOH under H-MW preparation (Paula et al., 2008). The use of this method made possible a very fast preparation of single crystalline powders. Crystalline, single-phase, needle-like Ba(Mn1/3Nb2/3)O3 ceramics possessing high anisotropy were also described (Dias et al., 2009). Large crystals could be prepared from a direct combination of nanosized crystals under H-MW processing, which use leads to fast nucleation and production of nanosized particles, which could undergo a multiplying growth via a "cementing mechanism". It was established that the Mn ions exhibit a particular role in the lattice dynamics in complex perovskites. BaMoO4 powders were prepared by the coprecipitation method and processed in a domestic H-MW equipment . It was shown that the BaMoO4 powders present a polydisperse particle size distribution, are free of secondary phases and crystallize in a tetragonal structure. In another closely related research of the same authors, octahedron-like BaMoO4 microcrystals were synthesized by the same method at room temperature and processed in H-MW equipment at 413 K for different times (from 30 min to 5 h) . The researchers revealed that as-prepared BaMoO4 microcrystals present an octahedron-like morphology with agglomerate nature and polydisperse particle size distribution. It was also indicated that the microcrystals grow along the [001] direction. A fast and economical route based on H-MW reaction was developed to synthesize pancake-like Fe2(MoO4)3 microstructures . It was established that several factors, including the amt. of nitric acid, reaction time, temperature and iron source, play crucial roles in the formation of the Fe2(MoO4)3 multilayer stacked structures. The oriented attachment and layer-by-layer self-assembly of nanosheets is responsible for the formation of these structures. Additionally, micro-sized decaoctahedron BaZrO3 powders (Fig. 8) were synthesized by means of a H-MW method at 140 o C for 40 min ). A theoretical model derived from previous first principle calculations allowed authors to discuss the origin of the photoluminescence emission in BaZrO3 powders which can be related to the local disorder in the network of both ZrO6 octahedral and dodecahedral (BaO12) hence forming the constituent polyhedron of BaZrO3 system. The H-MW processing was also employed to synthesize nanostructured alkaline-earth-metal (Ca, Ba, Sr) tungstate compounds in environmentally friendly conditions (110 o C for times ranging from 5 to 20 min) (Siqueira et al., 2010).   ) and tantalum oxide-added MgCuZn ferrite powders (Krishnaveni et al., 2006).
Other oxygen-containing salts are represented by a relatively small number of examples. Thus, by using H-MW crystallization approach, LiFePO4 nanoparticles were synthesized in several minutes without the use of any organic reducing agent and argon protection . A preferential orientation of crystal growth occurs upon MW hydrothermal field. The LiFePO4 crystals present 1) a change from nanoparticle to nanosheet with the increasing reaction time from 5 to 20 min, 2) a couple of redox peaks in their CV profiles, whose pairs correspond to the charge/discharge reaction of the Fe 3+ /Fe 2+ redox couple. The authors stated that, because of the LiFePO4 samples prepared without any carbon, the initial charge/discharge capacities and cycleability of absolutely are affected by the crystal structure which is controlled by the MW irradiation condition. Flower-like PbGeO3 microstructures were prepared at low temperature via H-MW solution-phase approach (Li, Z.-Q. et al., 2012). It was revealed that the entire structure of the architecture is composed of a large quantity of individual nanorods with 100-300 nm in width and several micrometers in length. Optical test showed that the absorption edge of the PbGeO3 sample was 315 nm, corresponding to a bandgap of 3.94 eV. The CoAl2O4 pigment commonly used for coloring ceramic products was synthesized by the H-MW processing, and ink-jet printing with this aqueous pigment ink was performed to decorate porcelain (Obata et al., 2011). The synthesized CoAl2O4 particles were regular octahedrons measuring approximately 70 nm and were used to prepare an aqueous suspension, which was then used for printing on tiles by an ink-jet printing system. A convenient H-MW synthesis of nanostructured Cu 2+ -substituted ZnGa2O4 spinels was reported (Conrad et al., 2010). A difference was observed in the coordination environments with Zn mostly situated on the tetrahedral sites of the spinel lattice whereas Cu is located on the octahedral sites of the nanostructured ZnGa2O4:Cu 2+ materials. Eu 3+ , Dy 3+ and Sm 3+ doped nano-sized YP0.8V0.2O4 phosphors were synthesized by a simple and facile microwave assisted hydrothermal process (Jin et al., 2011). Under UV excitation, the YP0.8V0.2O4:Ln 3+ showed the VO4 3-self-emission band at approximately 452 nm and the characteristic emission of doped lanthanide ions (Ln 3+ ). In addition, a facile H-MW route was developed to prepare oxynitride-based (Sr1-x-yCexTby)Si2O2- N2+  phosphors (Hsu & Lu, 2011 Uniform nanorod and nanoplate structured Bi2S3 t h i n f i l m s w e r e p r e p a r e d o n I T O substrates using a H-MW-assisted electrodeposition method . The obtained thin films are composed of orthorhombic phase Bi2S3 with good crystallinity. With the increase in the hydrothermal temperature (the best is 130 o C), the crystallinity of the obtained films gradually improves and then decreases. In a related report (Thongtem et al., 2010), Bi2S3 nanorods in flower-shaped bundles were synthesized by decomposition of Bi-thiourea complexes under the microwave-assisted hydrothermal process. It was shown that Bi2S3 has the orthorhombic phase and appears as nanorods in flower-shaped bundles. Their UV-visible spectrum showed the absorbance at 596 nm, with its direct energy band gap of 1.82 eV. In addition, silver sulfide nanoworms (diameter of 50 nm and hundreds of nanometers in length) were prepared via a rapid H-MW by reacting silver nitrate and thioacetamide in the aqueous solution of the Bovine Serum Albumin (BSA) protein (Xing et al., 2011). It was shown that the nanoworms were assembled by multiple adjacent Ag2S nanoparticles and stabilized by a layer of BSA attached to their surface. In vitro assays on the human cervical cancer cell line HeLa showed that the nanoworms exhibited good biocompatibility due to the presence of BSA coating. The authors stated that this combination of features makes the nanoworms attractive and promising building blocks for advanced materials and devices. As an example of practical application of metal calcogenides, obtained by H-MW technique, a red pigment, consisting of zirconium silicate-encapsulated particles of cadmium selenide sulfide, was prepared . The GaN nanorods were synthesized by means of a combination of H-MW process and ammoniation at high temperature using Ga2O3 as raw material (Li, D. et al., 2011). It was found that GaN nanorods with aspect ratio of 5:1 are composed of highly oriented nanoparticles. The nanorods belong to hexagonal structure, whose crystal orientation is (002). The efficiencies of two methods of synthesizing InP micro-scale hollow spheres ( Fig.  9) were compared (Xiuwen Zheng et al., 2009) via the analogous solution-liquid-solid (ASLS) growth mechanism, either through a traditional solvothermal procedure, or via a microwave-assisted method (S(H)-MW). InCl3 . 4H2O, HAuCl4 ethanol solution, P4 and KBH4 were used as precursors with ethylenediamine as solvent. MW synthesis was carried out for ca. 30 min under 180-220 o C at the microwave power 600 W. For traditional solvothermal route, long time (10 h) is necessary to obtain the micrometer hollow spheres, however, for the microwave-assisted route, 30 min is enough for hollow spherical products. Fig. 10 describes the formation mechanism of InP micro-scale hollow spheres, which, according to the authors, is as follows: under the thermal MW irradiation conditions, the reaction between P4 molecules and In is on the surface of the In/Au droplets. Thereafter, the formed InP nanoparticles undergo the solidification to form compact InP layer on the surface of the Au/In core/shell droplets, which block the further reaction of P4 with In molecules in the beads. As a result, when removing the unreacted In by diluted HCl solution, the inner Au cores separate from the outermost InP shells, and finally produce InP hollow spheres. Due to the loss of the support, some collapsed hollow spheres are formed.

Composites
The composites, reported as fabricated by H-MW technique, are mainly based on the simple, double oxides or salts described above. Thus, transition metal oxide/graphene composites are known (Kim et al., 2011). For single-phase unitary/binary oxides-graphene composites, a two-step strategy to prepare them is as follows: precipitation of hydroxides followed by H(S)-MW annealing (Chang et al., 2010). This method was applied to the preparation of Mn3O4-graphene and NiCo2O4-graphene composites. Metal oxide / CNT nano-hybrid materials (LiMn2O4/CNT, LiCoO2/CNT and Li4Ti5O12/CNT nanocomposites) were synthesized through selective heterogeneous nucleation and growth of the oxides on CNT surface using H-MW process (Ma et al., 2010). In the composites, CNTs acted as a substrate to deposit nano-sized metal oxide and to connect the nanoparticles along 1D conduction path. The nano-hybrid materials showed excellent high rate capability and good structural reversibility for energy storage applications. H-MW synthesis method was also applied (Guo et al., 2009) for fabrication of tin dioxide nanoparticles-multiwalled carbon nanotubes (MWCNTs) composite powder for preparation of gas sensor. The mixed solution of SnCl4 . 5H2O and NaOH at mole ratio of 1:(8-12), NaCl and multiwalled carbon nanotubes (MWCNTs) were used as reactants, subjecting to ultrasonic dispersion, and reacting at 110-180 o C for 30-300 min to synthesize SnO2 nanoparticles-MWCNTs composite powder by microwave-assisted hydrothermal reaction. Se/C nanocomposite with core-shell structures was prepared through a facile one-pot H-MW process (Yu, J.C. et al., 2005). This material, consisting of a trigonal-Se (t-Se) core and an amorphous-C (a-C) shell, can be converted to hollow carbon capsules by thermal treatment. GaP nanocrystals/morin composite fluorescent materials were prepared by microwave hydrothermal synthesis method with Na3P, GaCl3 and morin as raw materials (Cui et al., 2001). It was shown that GaP nanocrystals underwent no structure transformation under the microwave hydrothermal condition, but they grew larger after the composite reaction with morin. The wavelength of the composite materials blue-shifted and their luminescent efficiency increased when the particle size of GaP nanocrystals decreased.
Mesoporous composites of metal organic frameworks (MOFs; Cu-based) with boehmite and silica were prepared by one-pot H-MW synthesis in the presence of Pluronic-type triblock-copolymer . Mesoporosity in these composites can be tailored by varying the MOF/oxide phase ratio. Fe-JLU-15 materials with different Si/Fe ratios (Si/Fe = 90, 50, 10) were synthesized by H-MW process (Bachari et al., 2009). These species correspond to hematite particles, very small "isolated" or oligomeric Fe(III) species possibly incorporated in the mesoporous silica wall, and Fe(III) oxide clusters either isolated or agglomerated, forming "rafts" at the surface of the silica and exhibiting ferromagnetic ordering. Applying similar Fe-FSM-16 materials, the liquid-phase benzylation of aromatic compounds with benzyl chloride (BC) was investigated (Bachari et al., 2010). Catalytic data in the benzylation of aromatic compounds such as benzene and toluene with BC show that Fe-FSM-16 samples synthesized by the M-H process are very active and recyclable catalysts. Nano-TiO2 and super fine Al2O3 composite powder was developed by H-MW method, and TiO2-Al2O3 semiconductor-dielectric composite ceramics with uniform fine grain structure were prepared by fast speed sintering in H2 atmosphere (Lu & Zhang, 2003). Titania-hydroxyapatite (TiO2-HAp) nanocomposite was produced by H-MW technique (Pushpakanth et al., 2008); but, in case of related Ca, Sr and Ca0.5Sr0.5 hydroxyapatites (Komarneni, Noh et al., 2010), microwave-assisted reactions did not lead to accelerated syntheses of hydroxyapatites in comparison with conventional-hydrothermal method, because the crystallization of these materials occurred at very low temperature.
In addition, the nano-sized BaTiO3 and NiCuZn ferrite powders (40-60 nm) were synthesized at 160 o C for 45 min (Sadhana, Praveena et al., 2009). These xBaTiO3 + (1x)NiCuZnFe2O4 nano-composites were prepared at different weight percentages. It was observed that these composites were useful for the fabrication of Multilayer Chip Inductors (MLCI). The related nanocomposites of NiCuZnFe2O4-SiO2 (particle size of 20 nm) were prepared using H-MW method in the same conditions (Praveena et al., 2010). Among a little of organic matter-containing composites, we note the synthesis of poly (3,4ethylenedioxythiophene)/V2O5 (PEDOT/V2O5) by in-situ oxidation of monomer (3,4ethylenedioxythiophene) into crystalline nanostrip V2O5 using H-MW technique (Ragupathy et al., 2011). It was observed that the interlayer spacing of V2O5 upon intercalation of the polymer expands from 4.3 to 14 o .

Ceramics
The hydrothermal synthesis of oxidic ceramic powders was reviewed (Somiya et al., 2005) for the decomposition of complex oxides like ilmenite, the hydrothermal oxidation of metals, hydrothermal precipitation, combinations of electrochemical, mechanical, microwave and sonochemical methods with hydrothermal methods. Niobates are widely described as ceramic basis. Thus, using KNN ("kalium" (potassium) nitrate niobate) powder prepared by the H-MW method as raw material, traditional ceramic method was employed to fabricate the KNN based lead-free piezoelectric ceramic with 1 mol.% ZnO or 1 mol.% CuO sintering additives . The preparation method of lithium-doped potassium sodium niobate-based lead-free piezoelectric ceramic powder was based on use of MOH (M=Li, Na, K) and Nb2O5 as raw materials in a H-MW reactor . The advantages of the offered technique were low reaction temperature, short reaction period, high reaction activity of obtained powder, low energy consumption, and environmental friendliness. In addition, K0.5Na0.5NbO3 lead-free piezoelectric ceramics were prepared from their powders which were synthesized by H-MW method . The results indicated that phase of KNN ceramics were pure orthorhombic symmetry. When the powders synthesized at 160 o C for 7 h, the final ceramic grains possess considerably better distribution and more homogonous in size.
Among other ceramics, indium vanadates for severe applications as photocatalysts, anodes for Li rechargeable batteries or electrochromic devices were prepared via H-MW synthesis performed at 220 o C for different reaction times (Bartonickova et al., 2010). The H-MW method was applied to the preparation of strontium-doped lanthanum manganites with different stoichiometric ratio of the three oxides, La1-xSrxMnO3 (x = 0.3, 0.5, 0.6) (Rizzuti & Leonelli, 2009). The complete chemistry, mineralogical and microstructural characterization of the powders revealed the same structural properties of the perovskite powders previously synthesized by ceramic and conventional hydrothermal routes. In addition, a series of Ni0.5-xCuxZn0.5Fe2O4 ( x = 0.05, 0.10, 0.15, and 0.20) ferrites nanopowders were synthesized by H-MW method, and sintered into dense-ceramics under the conditions of 900 o C/4 h (Zheng, Ya-lin et al., 2007). The performed studies showed within a limited Cu content range of x = 0.05-0.20, copper ions were present in different ionic states in the A-and B-sites which could influence the size of lattice parameter. It was also found that crystallite size, initial permeability, resistivity and quality factor were the highest when the Cu content was 0.20.
By treating Cu(NO3)2 · 3H2O with a V-shaped ligand 4,4'-oxydibenzoic acid (H2oba), a dynamic metal-carboxylate framework [Cu2(oba)2(DMF)2] . 5.25DMF (MCF-23, Fig. 12) was synthesized, which features a wavelike layer with rhombic grids based on the paddle-wheel secondary building units (Xiao-Feng Wang et al., 2008). MCF-23 synthesized by conventional solvothermal methods always contained considerable and intractable impurities. In contrast, a S-MW method was proven to be a faster and greener approach to synthesize phase-pure MCF-23 in high yield. Larger crystals suitable for single-crystal diffraction could be obtained by the multistep microwave heating mode. Also, a 3D coordination copper polymer, [Cu2(pyz)2(SO4)(H2O)2]n (pyz = pyrazine), was synthesized under H-MW conditions (Amo-Ochoa et al., 2007). The authors especially note that microwave assisted synthesis produces monocrystal suitable for X-ray diffraction studies, reducing reaction time and with higher yield than the classical hydrothermal procedures.  (Ben Ali et al., 2007). These structures are built up from isolated FeF6 or CrF6 octahedra, water molecules and triprotonated amines; each octahedron is connected by hydrogen bonds to six organic cations and two water molecules. 57 Fe Mossbauer spectrometry proved the hyperfine structure confirming the presence of Fe 3+ in octahedral coordination and reveals the existence of paramagnetic spin fluctuations. Under H-MW conditions, two compounds Zn(pinH)(H2O) and Cd(pinH) were obtained through the reactions of Zn (or Cd) sulfate and 2-phosphonic-isonicotinic acid (pinH3) (Yang Yi-F. et al., 2007). The authors established that the first complex has a layer structure in which double chains composed of corner-sharing {ZnO5N} octahedra and {CPO3} tetrahedra are cross-linked through the carboxylate groups. The latter has a framework structure where the inorganic layers composed of edge-sharing {CdO5N} octahedra and {CPO3} tetrahedra are pillared by the pyridyl carboxylate groups. A 3D open-framework and a chain-structured zinc terephthalate were obtained by hydrothermal crystallization under microwave heating at 180 o C (Rajic et al., 2006). These structures have rather similar principal building units, which facilitates the structure transformation from the low-dimensional to the open-framework one during crystallization. For the optimization of the H-MW synthesis of [Zn(BDC)(H2O)2]n, where H2BDC = 1,4benzenedicarboxylic acid, the reactions were carried out at the fixed temperature of 120 o C for 10, 20, 30 and 40 min (Wanderley et al., 2011). Pure crystalline [Zn(BDC)(H2O)2]n was obtained in high yield (90%) with a reaction time of 10 min.

Other materials and processes
Series of reports are devoted to H-MW fabrication of a variety of molecular sieves and other adsorbents. Thus, a range of nanosize alkaline-free gallosilicate mesoporous molecular sieves (GaMMS) were synthesized using H-MW method . These nanosize GaMMSs exhibited high surface area (240-720 m 2 /g), pore volume (1.06-1.49 m 3 /g), narrow pore size distribution and nano-particle size between 20 and 100 nm and four-coordinated gallium site mainly. It was revealed that the nanosize GaMMS shows a much higher activity than that of conventional GaMCM-41, probably due to higher concentrations of H-form sites, external surface and fast diffusion. Mesoporous molecular sieves MCM-41 modified by single (Ti) and bimetal (Ti-V) ions with highly ordered hexagonal arrangement of their cylindrical channels were prepared by direct synthesis under H-MW conditions at 403 K . It was shown that Ti and V ions were introduced into MCM-41 under M-H conditions and Ti/V-Si bond was formed. The modified materials were high active and selective in the epoxidation of styrene at 343 K in comparison with single functional MCM-41. The applied method greatly improved the selectivity to styrene oxide. In addition, a rapid process to prepare cryptomelane-type octahedral molecular sieve (OMS-2) nanomaterials using a H-MW technique (MW-HT) for 10 s (in comparison with up to 4 days in a conventional hydrothermal reaction) was presented . It was shown that the OMS-2 nanowires were produced from thin nano-flakes with increasing reaction temperatures. Carbon/silica adsorbents (carbosils) were prepared by pyrolisis of CH2Cl2 at 823 K and the reaction time from 0.5 to 6 h on the mesoporous silica gel surface and then hydrothermally treated at 473 K with steam or liquid water by using the classical autoclave with traditional heating way or in the microwave reactor (Skubiszewska-Zieba, 2008). It was stated that hydrothermal treatment in the microwave reactor, contrary to that in the classical autoclave, allowed obtaining adsorbents with noticeably higher values of total pore volume in relation to the initial adsorbents and in majority with a higher specific surface area. Application of microwave energy allowed obtaining adsorbents with lower values of surface free energy in relation to the initial adsorbents and those modified in the autoclave.
Carbon-based materials are also produced by H-MW method. Thus, rice chaff can be converted into activated carbon by alkaline treatment at high temperature, in particular by H-MW treatment with NaOH solution (Inada et al., 2011). Rice chaff was heated at 700 o C for 1 h in N2 after HCl treatment to remove impurity, such as alkali metals, resulting in the formation of charcoal. After further necessary steps, it was revealed that the specific surface area of product was 1060 m 2 /g under microwave irradiation and 690 m 2 /g by conventional heating with autoclave, which indicated that H-MW treatment is effective for activation of charcoal. In addition, acidic suspensions of multi-walled carbon nanotubes (MWCNTs) in 5 M HNO3 solutions were readily obtained by microwave-assisted hydrothermal digestion and their rapid surface functionalization with polyaniline could be achieved growing composite coatings in situ onto graphite electrodes in an acidified suspension of MWCNTs and aniline (Wu et al., 2007). The advantage of the integrity of the MWCNTs after microwave exposure was used to improve the mechanical strength of the composite coatings, especially when an utmost thick coating was attempted for a high capacitance.
Materials and processes using iron-containing compounds. Iron-FSM [folded-sheet mesoporous material]-16 materials with different Si/Fe ratio (Si/Fe = 90, 60, and 10) were synthesized by H-MW process (Bachari et al., 2011). These species correspond to hematite particles, small isolated Fe(III) species possibly incorporated in the mesoporous silica wall, and iron oxide clusters either isolated or agglomerated, forming rafts at the surface of the silica and exhibiting ferromagnetic ordering. It was shown that Fe-FSM-16 synthesized this way are active and recycle catalysts. The high yield and rapid precipitation of Fe(III) arsenate(V) dihydrate (identical to the mineral scorodite) from aqueous Fe(III)-As(V) solutions at pH 0.6-1.1 was achieved long ago using microwave dielectric heating (Baghurst et all., 1995). The process could be useful for As removal from industrial wastes. Metallic iron (-Fe)/manganese-zinc ferrite (Fe3-x-yMnxZnyO4) nanocomposites were synthesized for 15 s using H(S)-MW treatment of alcohol solutions of chloride precursors and sodium ethoxide (Caillot et al., 2011). For all samples, 20% of metallic iron was routinely obtained using the microwave flash synthesis. Consequently, the microwave heating appears to provide an efficient source of energy in producing metallic iron nanoparticles protected against oxidation by an oxide matrix. Additionally, as an improvement of the conventional hydrothermal reaction with iron powder, NaOH and H2O as reactants at 423 K, leading to iron oxide Fe3O4, NaFeO2 and hydrogen, MW-heating was adopted to induce the hydrothermal reaction . Under MWs, NaOH and H2O absorbed microwave energy by space charge polarization and dipolar polarization and instantly converted it into thermal energy, which initiated the hydrothermal reaction that involved with zero-valent iron. The developed microwave-hydrothermal reaction was employed for the dechlorination of PCBs (polychlorinated biphenyls). For PCBs in 10 mL simulative transformer oil, almost complete dechlorination was achieved by 750 W MW irradiation for 10 min, with 0.3 g iron powder, 0.3 g NaOH and 0.6 mL H2O added. The authors stated that MW irradiation combined with the common and cheap materials, iron powder, NaOH and H2O, might provide a fast and cost-effective method for the treatment of PCBs-containing wastes.
Zeolites/alumosilicates, composites and membranes on their basis are frequently (especially ZSM-5) obtained by the discussed method. Thus, evaluation of hydrothermal synthesis of the zeolite BZSM-5 was performed by treating the synthesis mixture by different aging processes, namely, ultrasonic, static, stirring, and microwave-assisted aging prior to the conventional hydrothermal treatment (Abrishamkar et al., 2010). That the ultrasonic and microwave assisted aging shortened the crystallization time and altered the crystal size and the morphology of the obtained products. Mullite (Al6Si2O13) powders were prepared by solgel combined with H-MW process using tetra-Et orthosilicate and Al(NO3)3 . 9H2O as raw materials (Yang, Q. et al., 2010). It was shown that the increasing of microwave hydrothermal temperature can decrease the synthetic temperature of mullite. The initial temperature of the mullitization of gels was about 1046 o C, but the temperature of preparation of pure mullite should be at 1300 o C, which can be decreased to 1200 o C through H-MW process. Using silatrane and alumatrane templates, remarkably uniform zeolites (NaA, EDI-type, ABW-type, FAU-type, K, and ZSM-5 zeolites) were obtained via the sol-gel process and H-MW treatment to obtain small and uniform zeolite crystals to prepare zeolite membranes (Wongkasemjit, 2009). The organic ligands of both precursors not only make the molecules stable to moisture, but also, after hydrolysis, provide trialkanolamine molecules which could function as another template for the reaction. The formation of ZSM-5 zeolite/porous carbon composite from carbonized rice husk was investigated using microwave-and conventional-hydrothermal reaction at 140-160 o C (Katsuki et al., 2005). It was established that, compared to the conventional-hydrothermal (C-H) formation of ZSM-5 zeolite, the H-MW reaction led to increased rate of formation by 3-4 times at 150 o C. The surface area of ZSM-5 zeolite (without template)/porous carbon composite was shown to be 485.4 m 2 /g and this composite had both micropores and mesopores. Zeolite nanocrystals (e.g., silicalite-1, ZSM-5, LTL, BEA and LTA) with controllable size, morphology and SiO2/Al2O3 ratio were prepared (Yuanyuan Hu et al., 2009). It is found that high synthesis temperature and long reaction time benefit the growth of all the referred zeolite nanocrystals. The authors established that for the nanozeolites crystallized in low alkalinity systems (e.g., ZSM-5, BEA and LTA), both increasing the alkalinity and decreasing the water content accelerate their nucleation process and thereby result in the decrease of their crystal size. On the contrary, for those prepared in high alkalinity systems (e.g., LTL and silicalite-1), an inversed trend could be observed. In addition, stable zeolite beta coatings with a thickness of 1-2 m were synthesized on a borosilicate glass substrate by H-MW synthesis (Muraza et al., 2008). In addition, a regular nanocrystalline supramolecular Mg-Al hydrotalcite was prepared via glycol-frequency H-MW reaction using MgCl2 . 6H2O, AlCl3 . 6H2O as raw material and Na2CO3 as precipitator . It was shown that the hydrotalcite exhibited as a homogeneous and hexagonal sheet.
A high quality pure hydroxy-sodalite Na8[AlSiO4]6(OH)2 zeolite membrane was H-MWsynthesized on an a-Al2O3 support (Xiaochun Xu et al., 2004). This process only needed 45 min and synthesis was more than 8 times faster than by the conventional hydrothermal synthesis method. The pure hydroxy-sodalite zeolite membrane method was found to be well inter-grown and the thickness of the membrane was 6-7 m. Gas permeation results showed that the hydrogen/n-butane permselectivity of the hydroxy-sodalite zeolite membrane was larger than 1000, being a promising candidate for the separation of hydrogen from gas mixtures and important for the emerging hydrogen energy fuel system. The potential of microwave heating for the rapid synthesis of thin silicalite-1 membranes by secondary growth from microwave-derived silicalite-1 seeds was evaluated (Motuzas et al. 2006). The morphology, thickness, homogeneity, crystal preferential orientation and single gas permeation properties of the silicalite-1 membranes were studied in relation to the synthesis parameters. Other related zeolite-ceramic membranes (titanosilicalite TS-1 (Sebastian, V.; Motuzas, J. et al., 2010) and MFI-type ) are also known.
Other H-MW-synthesized materials and compounds are rare; some of them also found useful practical applications, as, for example, titanium-based nanometer pigments (Paskocimas et al., 2009). CdS/Titanate nanotubes (TNTs) were also prepared . It was established that the CdS nanoparticles synthesized using a 140-W microwave irradiation power at 423 K photodegraded 26% ammonia in water, while the photocatalytic efficiency increased to 52.3% using the synthesized CdS/TNTs composites. So, it can be stated that the CdS/TNTs photocatalysts possess improved photocatalytic activity than that of CdS or TNTs materials alone. Mesoporous composites of metal organic frameworks (MOFs; Cu-based) with boehmite and silica were prepared by one-pot H-MW synthesis in the presence of Pluronic-type triblock-copolymer . A variety of visible-light-driven silver vanadates, including -AgVO3, -AgVO3, and -Ag3VO4, were synthesized using a H-MW synthesis method (Pan et al., 2011). The -Ag3VO4 crystalline sample with rich hydroxyl functional groups on the surface exhibited the highest degree of photocatalytic activity. Thus, the reaction rates of the photodegradation of isopropanol (IPA) and benzene vapors were approximately 8 times higher than those of P25 under visible-light irradiation. In addition, the photocatalytic activities of H-MW samples were higher than those of samples produced by conventional hydrothermal techniques. The authors explained this due to an increase in the specific surface area and additional hydroxyl functional groups on the surface. Another application of the H-MW method for destruction of organic pollutants was reported in . The reaction of reduced iron powder and NaOH or KOH led to obtaining iron oxides and/or ferrites, releasing hydrogen for quick dechlorination of persistent organic pollutants. The method was shown to have the advantages of short treatment time and high dechlorination efficiency and can be used for treating waste organochlorine pesticides, polychlorobiphenyl oil in transformer, soil and sediment heavily polluted by organochlorine pesticides and polychlorobiphenyl oil, and garbage burning fly ash and chlor-alkali brine sludge containing high-concentration dioxins. Ca(OH)2 alone and Ca(OH)2 with H3PO4 addition (Paddition) were effectively used to remove and recover boron from wastewater using hydrothermal methods (Tsai et al., 2011). A microwave hydrothermal method was also used and compared with the conventional heating method in batch experiments. For the case of Ca(OH)2 alone and the MW method, expterimental results showed that boron recovery efficiency reached 90% within 10 min, and crystals of Ca2B2O5 . H2O were observed. For the case of P-addition and the MW method, boron recovery efficiency reached 99% within 10 min, and Ca phosphate species (CaHPO4 . H2O, CaHPO4 and Ca10(PO4)6(OH)2) were formed. Hydrophobic organoclays (hybrids derived from an ion exchange of hydrophilic clays with quaternary ammonium salts and used as rheological additives in paints, inks, cosmetics, nanocomposites, and as pollutant absorbing agents in soil remediation programs) were studied using a natural (Na-montmorillonite) and several synthetic clays (Nafluorophlogopites) as precursors (Baldassari). These organoclays synthesized using both conventional hydrothermal and H-MW processes.

Conclusions
Nowadays, the H(S)-MW techniques are already classic method for fabrication of distinct chemical compounds and materials, including nanomaterials. Inorganic compounds and materials are generally obtained by this route, although a certain number of organiccontaining compounds are also reported. Use of organic matter in this method can be considered as a careful pioneer experimentation in order to check its suitability for MWhydro(solvo)thermal reactions. Compounds, which are stable in hydrothermal conditions, such as metal oxides, oxygen-containing and other metal salts, a variety of zeolites, carbonbased materials, as well as composites on their basis, are classic synthesis objects by this route. It is expected that more organic/organometallic products could be tried to be prepared in H(S)-MW conditions, for example thermally stable (up to 500-600 o C, that is rare for organic matter) aromatic macrocycles of phthalocyanine (Edrissi et al., 2007) type and related compounds.