Waste in Uganda.
\r\n\tHealth and mental health issues of both children and adults and evidence-based treatments will be included. The types of sexual violence that occur and prevention efforts that have – or have not – been made to address the occurrence of these types of violence will be covered.
\r\n\r\n\tCultural and governmental policies, as well as legal and jurisdiction issues to address victims of these crimes, will also be incorporated in the book. For instance, Meagan’s Law and its worthiness in protecting children will be incorporated as well as the Federal program to reimburse victims of online child pornography and the legal entanglements and ramifications of that program.
\r\n\r\n\tThe typology of offenders and the effectiveness of treatment will also be addressed.
\r\n\tFinally, the direction of prevention strategies, treatment needs for both victims and offenders, and policy issues to move the field forward, particularly in terms of research, will be presented. The field of sexual violence has made significant strides in the past 45 years in terms of understanding sexually deviant behavior, the impact on children who then experience the symptoms of that trauma in adulthood, how to effectively interview sexually victimized children, and finally, treatment and social mores that make disclosure possible and recovery hopeful.
Most of sustainable development goals are food related and should be addressed properly. Particularly in Africa, food and nutrition insecurity is coupled to a growing demand of animal source proteins that could be solved by a different conception of food systems [1]. The ideas about considering insect production as part of livestock have been a long run scholar discussion in the West [1, 2] and emerged as a consistent topic in Africa of recent [3, 4]. Insect consumption also called entomophagy is then widely accepted as a palliative to food scarcity not only for today but also for the future [1, 5, 6]. Insect consumption is part of cultural heritage in tropics and beyond [6, 7, 8]. Insects at different stages are nutritive food sources made cheaper by their availability and sustainable by their nature [5, 7, 9]. Cameroon has been regularly cited for its richness of edible insects and related practices [3, 4]. The objective of this review is to summarize the major features concerning edible insects, few constraints and opportunities for the country in a globalized and changing environment.
Cameroon is an elongated country stretching from Congo Basin (humid tropics) to Lake Chad (Sahel). The country is also described as Africa in miniature by its diversity and position. The entomophagy is present everywhere from Sahelian to humid forest regions [3, 4, 5]. There is a variety of beliefs attached to insect consumption all over the country [5, 10]. Some communities have a larger panel of edible insects throughout the year than other [11]. The differences observed concerning practices and recipes among communities are based on preferences, ability to harvest and process as well as the social importance attached to insect consumption [11, 12]. There is a large number of insects consumed in Cameroon.
Compared to other food sources, there are little taboos in insects’ consumption in most of Sub-Saharan countries [3]. About 1700 insects’ species are consumed around the world with majority from tropical world [1]. Some are widely identified and few less known in the context of recent interest by research in Cameroon.
Caterpillars (order Lepidoptera) are the most populated group of edible insects in Cameroon concerning the number of species [10, 11, 13]. About 200 species have been reported and many are still unveiled. Some are used by limited communities, making their identification a real challenge [5, 11]. Forests provide shelter and perfect milieu for numerous of them [5, 7, 9]. Populations have developed a great knowledge about the bioecology of the most marketed species. In savannah and less woody forests, there are less diversity like in Adamawa and northern regions [10]. Figure 1 below displays the naturel gathering nest (in a tree) and fresh and dried caterpillars found in Cameroon.
Edible caterpillar nest and heap of fresh and dried ones (
The second group of most consumed insects is made up of termites (order Blattodea) with two species,
Processing of termites (
Besides “soft” species, crunchy and crispy are very regarded as a delicacy, mainly of Coleoptera order [15]. Adult Palm weevils are known as pest but “domesticated” by raffia palm harvesters (adults and grubs) [10, 11]. Various adults’ species are the most collected in
Adult dried cetonia (
Palm weevil grubs (
The acridians or grasshoppers (Orthoptera),
Migratory locusts (greyish and greenish) and dried in North Cameroon.
Field crickets and cricket-like species (order Orthoptera) are also exploited in Cameroon humid regions [10, 11]. Giant cricket also called tobacco cricket (
Insects have played important roles in some national communities. For instance, some forest groups like Baka people praise the taste, flavors, contents and properties of some insects at particular stages [5, 11]. Honey bees larvae are considered as a powerful detoxification agent and then prescribed to some recovering patients in those communities [11]. In the same line, red ants (
Insects contribute also to income generation in rural and peri urban households [5, 11]. Local and transboundary trade involving Cameroon has been mentioned in some studies [5, 14]. Insects’ harvesting requires some abilities acquired by empirical experiences which made some people experts and providing livelihoods means. This is for instance the case of
Component rotational analysis of insects’ consumption determinants.
Edible insects have become a more or less “normal” item or commodity in local trading spaces, even in big cities [17, 18]. The main categories of actors involved in collection are youths (irrespective of sex) for seasonal insects, women and youths for crickets and locusts, men for grubs and termites [5, 10, 11, 18]. Intermediate categories are made mainly by women or youths (street vendors) and exclusively women for urban markets. In
With the influence of the mainstream food systems, processing and labeling edible insects are sectors for new food ventures [15, 17]. The type and flavors of spices make the difference for some conserved or already processed items [10]. Fast communication is now harnessing the pickup of technologies and making edible insects’ as a potential popularized food item [1, 2, 6].
Insect production for human consumption started very humbly under a group of researchers from Gembloux—Belgium [2]. Preliminary findings in artificial production of palm weevil larvae are promising [19]. Massive palm grub production is in pilot stages with some important success [19, 20, 21, 22, 23]. Substrates and microclimate conditions have been mastered and trials already done under farmers’ conditions [22]. The investment for edible insects’ production is balanced with substantial income attached and also to environmental health.
If supposed nutritional factors with food habits have factored much entomophagy in Cameroon like in other places, some field experiences are giving evidence [1, 6, 19, 24]. Science communication and access are making consumers more attracted by appealing presentation of edible insects’ nutrition facts. Palm weevil larvae has been largely studies [25] and results are opening avenues for other larvae consumption [26]. Entomophagy is then no more a fancy or traditional habit, but a real response to nutritional insecurity [27, 28]. Food safety in edible insects encompasses both endogenous and environmental factors. Chemical analyses have shown that some insects need special care before their consumption, like
Insects’ consumption even popular or popularized is not yet legal in Cameroon context [30] because of insufficient policies. Most of gathered food in nature in Cameroon is not yet under strict safety regulation which may bring serious public health issues in case of hazardous products. While insects’ farming and trade are gaining population attention, research and other influencers should in connivance with other international bodies invest in the domain. Vocational and higher education systems should also embrace genuinely the trends by crafting appropriate curricula and learn from learning by doing experiences.
Insects’ consumption in Cameroon is a reality for ages. Its biodiversity is very rich and massively exploited diversely. There are large numbers of species, exploited for food and other reasons. Urbanization and communication facilities coupled to food systems unification are favoring the migration of habits across generations and regions. Besides nutritive values at home level, edible insects provide income, jobs and potential enterprises, both for economic, scientific and cultural impacts in Cameroon society. There are gaps that make excellent avenues for innovative approaches in insects research. On the food safety aspects, risks analyses regarding natural or secondary toxicity of consumed insects should be undertaken. Edible insects’ value chain could be made also stronger is legal framework is well designed and implemented. There are needs to train Veterinarians and others on harvesting methods as well as processing and packaging, which could yield norms. These could mainstream numerous affordable insects within animal proteins food systems and improve nutrition security and income generation at many extents. Some indigenous habits and skills (related to products’ properties and bioecology) should be well studied and not regarded as lower knowledge. Many communities practices could be excellent avenues for future, wider than food security alone. Edible insects’ research and policy need to be strengthened locally with the existing findings already uncovered.
We are thankful to authors, namely, Dr. Le Gall, Dr. Muafor and M. Gnetegha for providing their research findings and/or comments to blend the current synthesis.
The author declares to have not “conflict of interest.”
According to the World Bank, the world generates 2.01 billion tonnes of MSW every year and is expected to increase by 70% by 2050 [1]. The mean global temperature increased by 1.9°F since 1880 and is credited to an increase in human activities like waste generation [2]. Specifically, food waste is a global concern with up to 1/3rd of food produced being wasted in high-income countries and this makes it the world’s third-largest emitter [3]. The global population, urbanisation, and economic growth are identified to have a strong correlation to how much waste is produced and yet by 2050, the world population is anticipated to increase to more than 9 billion people with developing economies accounting for 85% of the global population [4] and with the number of people living in urban areas increasing to 6 billion [5].
WTE technologies, through converting the waste generated to energy, are a partial renewable energy source because of the waste that comprises of biomass material like paper, card, and timber. Even though these biodegradable wastes might emit carbon dioxide when burned, the process of photosynthesis enables the plants to absorb the CO2 and this is regarded as a short-term cycle. Note that the waste which is fossil fuel-based generates GHG and contributes to climate changes [6, 7].
Developing countries are failing to invest in waste management and the cry is to take immediate action to reduce this or the effects of waste on the environment through waste management techniques [8]. Also, developed countries are currently promoting economic and social wellbeing through energy supply yet the energy needs of developing countries are still straining to the respective governments [5]. The success of WTE in Europe is observed by determined investors who trust the technology could work in Africa [9] hence there is a need to exploit the possibility of applying sustainable WTE technologies to meet the growing energy needs while improving the SWM system.
The waste management hierarchy designates the best solutions for managing waste according to what is most suitable for environment [10] and is presented in Figure 1.
Illustration of the waste hierarchy [
Priority is given to preventing waste and this entails using less material, waste reduction at source, or retaining products for long [10]. Prevention of waste is advantageous from any waste management strategy such as energy recovery, recycle, and landfill because the production of material that becomes waste as well as its treatment is circumvented. The definition of waste prevention includes avoidance of waste creating products, waste reduction at source, increasing the life cycle of a product, and reuse [11]. According to the World Bank Report, the fastest way to manage and decrease waste is to minimise economic activity because when countries urbanise, their economic wealth grows along with standards of living, disposable incomes, and consumption of goods and services which leads to an increase waste generated [12]. Another suggested solution is moving from a linear to circular economy that is by curtailing resource extraction and material inputs, and improving efficiency through developmental designs, recollection, and recycling [8].
Under these stages, the waste producer is required to check, clean, repair, and reuse the material or shift the use of the material to another function. Useless waste is converted into useful materials, and hazardous waste is turned in harmless material hence improving utilisation [10, 11]. Resource recycling promotes economic, social, and environmental benefits because the country saves on natural resources, decreases energy consumption, promotes employment while decreasing waste and pollution. Useless waste is converting into useful materials, and hazardous waste is turned in harmless material hence improving utilisation [11]. An increase in recyclable material in the composition of waste requires reuse and recycle management, while an increase in organic waste or other unrecyclable material would require other management techniques [13].
Recovery can be through energy recovery techniques and/or using waste for either agricultural purposes or backfilling [10]. Section 3 provides more insight on energy recovery techniques. It involves recovering usefulness from the waste through energy recovery techniques such as anaerobic digestion, fermentation, incineration, gasification and pyrolysis to produce energy (fuel, heat and power), and using waste for backfilling [10]. The recovery of biogas and heat energy from landfills and incineration plants, respectively, will reduce waste generation and help in the appropriate reutilization of resources. Resource utilisation of livestock and manure, agricultural waste, domestic sewage sludge, and other organic SWs during aerobic composting and anaerobic digestion and then recycling the organic substances and nutrients, etc. are some of the efficient ways to realise SW resources and materials recovery systems [11].
Depending on a country’s policies, waste is disposed of through grinding, milling, open dumping, landfilling, and compaction or burned in an incinerator without energy recovery. The waste can also be disposed of in other countries only when it has a market in those specific countries [8, 10, 11].
High income countries mostly dispose through landfilling and thermal treatments while middle- and low-countries mostly dispose by open dumping and poorly managed landfilling. However, the middle-income countries operate with managed dumping processes [12].
In 2016, the total investment in biomass and WTE technologies was 6.8 billion USD which was a decline from 19.9 billion USD in 2011, 14.9 billion in 2012, 12.4 billion in 2013, 10.8 billion in 2014 but an increase from 6.7 billion in 2015 [14]. Despite the increase, it is evident that interest in WTE is not growing across the globe and yet it is successful in European countries. Energy from waste can either be heat, power, or a combination of heat and power and/or secondary energy carriers of gas, liquid or solid. The choice is usually dependent on the energy requirements of the country or region [6].
Landfills are semi-natural terrestrial ecosystems remodelled on lands that were formerly used for disposing of waste. Landfills exist in various regions and are commonly defined by their age, the composition of waste, design, and ecological operation. They are usually disposal for MSW and sometimes for hazardous solid wastes when they are secure [15]. The landfills are designed to make sure the waste is separate from the surrounding environment [16]. Also, two design structures are feasible for a landfill that is landfilling (where waste in packed in an unwanted hole) or land raising (where waste is directly dumped on the ground) [17]. The average landfill occupies 600 acres [18].
The by-products of landfills are landfill leachate produced when rainwater penetrates and channels through the decaying waste, and landfill gas produced through bacterial degradation under anaerobic conditions [15]. These products can be hazardous in the following ways. Firstly, when acids from degrading waste mix with other components waste, it could cause the leachate to become toxic. Secondly, landfill gas is a source of GHG emissions comprising methane and it is highly flammable its leakage poses a risk of explosions to the surrounding environment [17]. Since the by-products can escape or diffuse through cracks in the deposited material, landfills are designed to minimise their movement to protect the environment [15, 19]. Liners and a leachate collection system are installed to prevent leachate from moving to surrounding soil and water while a gas collection system or a landfill cap is installed to hinder the gas from escaping to the air. The system consists of vertical or horizontal wells used to access the gas which can be collected for 7–10 years. Also, its average efficiency is reported to be 70–85% [19]. Figure 2 shows a typical landfill gas system.
Schematic of landfill treatment set-up [
The landfill gas produced contains 45–55% methane and is collected through a system of gas pipes and through combustion it produces electric power by running a gas engine and/or turbine. Also, the gas can be used for cooking in nearby communities, or boiler fuel for district heating and industrial purposes and this is demonstrated in Figure 3 [6, 19]. The energy potential of landfills across regions ranges from 5 to 40 L/kg of waste depending on the organic composition and has a CV of about 4500 kcal/m3. Also, it is key that the landfill gas is purified to remove any hazardous chemicals [16, 19]. Figure 4 shows an example of a landfill recovery site in the UK managed by Viridor. Viridor operates 32 landfill sites in the UK which generate a total of 86 MW of power to supply 50,000 homes with power all year [23].
Set-up showing the use of gas recovered from a landfill [
Viridor Dunbar, a potential landfill energy recovery facility [
When landfills reach the maximum capacity, they are closed for replenishment through appropriate engineering designs and the older type is normally deserted [15]. Many disposal sites are poorly operated and stay as open dumps which pose a risk to the environment both in the short- and long-term [13]. Landfills must be closely monitored by the respective municipalities to prevent leakage of the by-products [15].
Anaerobic digestion involves a sequence of biological processes through which biodegradable waste is digested by microorganisms in the absence of free oxygen to generate biogas [6]. The most suitable waste for this technology is organic waste that includes food and agricultural wastes like animal slurries and that the main end product of anaerobic digestion is biogas usually containing 60 and 40% of methane and carbon dioxide, respectively [24]. The composition of waste is comparable to what is reported by [25] that is 55–70% for methane and 30–35% for carbon dioxide. Anaerobic digestion has relatively long digestion days ranging from 20 to 40 days [24] and because of this decomposition needs to happen by the action of an enzyme [11]. Other factors that affect the process are pH, temperature (35–38°C), loading rate, mixing rate, and toxic compounds [19]. When food waste is added to the process, the methane quantities will increase, and the process of methane production will speed up [24]. The typical amount of biogas produced usually ranges from 50 to 150 m3/tonne of wastes and this also depends on the composition of the waste [19]. The plants emit residue gases which comprise nitrous oxides, hydrogen chloride, carbon monoxide, and the total organic carbon [25].
The biogas is used to produce electricity and/or heat with a biogas CHP gas engine. Also, the biogas can be used as a renewable natural gas or in the transportation sector as a fuel. The other product of the process is a nutrient-enriched digestate used as a soil fertiliser [19, 24]. Figure 5 presents a typical illustration of a biogas plant.
Schematic of biogas plant [
This technology is considered to be environmentally friendly and solves the problem of disposing of the bio-degradable waste [11]. Also, anaerobic digestion is usually used to pre-treat the organic component of waste to reduce its weight, and reduce the methane and leachate emissions [27]. Figure 6 shows a biogas plant established in Nakuru, Kenya which uses the crop residues of a farm to generate 2.2 MW of electricity used to cultivate 1740 acres of vegetables and flowers, supplies electricity to up to 6000 rural homes and sells surplus power to the Kenya National Grid [29]. Figure 7 demonstrates small scale applications of anaerobic digestion in households in India.
Gorge Farm Energy Park, Nakuru Kenya [
A family in Maharashtra, India cooking using biogas [
Incineration is the regulated burning of solid waste with sufficient oxygen under anaerobic conditions at high temperatures above 850°C to release heat. The process also leads to a high-temperature combustion flue gas consisting of CO2 and water and bottom ash which consists of minimal amounts of leftover carbon [6, 11].
The waste burned can either be in a raw form that is waste immediately after the first three stages of the waste hierarchy or in a pre-treated for like RDF and for each case the plant configuration changes depending on the feedstock. The energy content of raw residue typically ranges from 8 to 11 MJ/kg and the energy content of the pre-treated feed is typically between 12 and 17 MJ/kg [6]. The higher energy content in RDF is because water, recyclable (metals and glass), and inert materials (stones) are removed leaving the waste with the higher energy content [6, 19]. The other advantage of RDF over raw residue is it provides an opportunity to remove most of the hazardous material that could be harmful when burned [19].
The major importance of incineration is to get rid of problematic waste [31]. Incineration decreases the initial quantity and weight of waste by 90% and by 75%, respectively [31] and this makes it suitable for disposing of waste especially in countries that are facing disposal management problems [32]. Typically, 65–80% of the organic waste energy content retrieved as energy. This process uses the combustion heat through a boiler to generate steam. The steam is either applied in steam turbines to produce power and/or used in the heat exchanger technologies to meet heating requirements of an industry or community [6, 19, 24, 33]. A CHP plant that generates heat and/or electricity and is reported to be the most efficient way of recovering energy using a steam boiler [6]. When the incinerator produces heat only, or electricity only, or a combination of both, the efficiency of the plants ranges from 70–80%, 20–25%, and 50–60%, respectively [34]. The choice on whether to produce heat or electricity or both will depend on the needs of the country. The residue bottom ash can be discarded in a landfill or applied as construction material [11]. Figure 8 demonstrate a CHP incineration plant.
A schematic illustration of a typical incineration plant [
Even though incineration is efficient, the long-term consequences of pollution become evident and suggests the need to improve the fuel compositions, reduce the moisture in the fuel, reduce the sizes of the waste fuel particles, and modify incinerator designs to reduce pollution [24]. The importance of cleaning the flue gas before letting it out in the environment by placing pollution control devices (electrostatic precipitators), or placing an appropriate furnace configuration, or by controlling the combustion process [11]. This flue gas can also be retrieved in the form of energy to generate electricity [24].
Incineration is considered very expensive in terms of capital, and O&M. The process is reported to be more expensive than controlled landfilling and that for the project to economically feasible the energy recovered must be sold. Also, technology is not efficient when the waste composition has low calorific values [33]. Figure 9 shows a CHP incineration plant in Sweden that handles 700,000 tpa, produces 2174 GWh of heat used in district heating, and 197 GWh of electricity, yearly [36].
The Högdalen CHP-plant in Stockholm, Sweden [
Pyrolysis is the thermochemical degradation of organic waste at high temperatures with no oxygen [24, 37, 38]. Also, the process is usually powered by the energy produced during thermal degradation (endothermic process) [38, 39]. It is reported that the process requires consistent feedstock which limits its commercial-scale applicability from accepting MSW since MSW in its raw form is usually not suitable for pyrolysis and normally would need pre-treatment through mechanical preparation and separation to remove inert materials as well as glass, and metals [6]. However, the process is gaining more attention than incineration because of its ability to use a vast range of industrial and domestic waste and its ability to generate different products [37]. The by-products are either gases (syngas), liquids (bio-oil), or solids (bio-char) and the process comprises a secondary chamber that where the gases or oils are burned to generate electricity or usable heat [24]. Figure 10 presents a schematic of pyrolysis plant and the variation in yield depend on parameters such as heating rate, the pyrolytic temperature, and evacuation of the product from the reaction zone [37, 40, 41].
Illustration of the pyrolysis process [
The biochar comprises non-combustible components plus carbon while syngas comprises combustible matter that is CO, H, H4, and other volatile organic compounds. The bio-oil has high heat value and is used as industrial fuel oil [6, 19]. Also, the products can be a fuel to generate power using gas engines and gas turbines [24]. The CVs for syngas, bio-oil, and biochar range from 10–15 MJ/Nm3, 15–20 MJ/Nm3, and 34 MJ/kg, respectively. Even though char’s CV is comparable to coal, it is limited by the complex nature of waste which might comprise hazardous elements that pose risk to humans and the environment and care must be taken [37]. Nonetheless, the products are ready to use and specifically, the waste polymers generate the best oil product.
The pyrolysis technology is expensive compared to commercial ways of treatment [24] and the need to pre-treat waste. The pre-treatment devices are expensive and complex [37]. Also, the syngas causes tarring which can easily lead to blockages and operational challenges. Because of this, pyrolysis facilities have been associated with failures and inefficiencies [6]. Failure to sort waste before the process could lead to the production of dangerous nitrogen compounds in the products hence the need gas cleaning devices [37].
Figure 11 shows a pyrolysis plant located in Bulgaria that converts plastic waste into diesel oil [42] and despite the various pilot plants and industrial-scale developments, it is reported [37] the process is still not economically viable.
Huayin plastic to diesel oil plant, Bulgaria [
Gasification is the process through which combustible gas is produced through partially oxidising waste at high temperatures of 800–900°C [24]. Gasification could be considered in-between pyrolysis and combustion because oxygen added neither allows full oxidation nor allow full combustion. The gasification process mainly produces its heat however part of the heat is needed to start and continue the process [6]. The gas produced is known as syngas which can be burned to generate heat or in gas engines and gas turbines as a fuel to produce electricity [24]. Figure 12 illustrates the process of MSW gasification to generate power [43].
Schematic of MSW gasification to produce power [
The gas generated from gasification is reported to have Net CV varying between 4 and 10 MJ/Nm3. Another product is a solid residue of ash which is non-combustible and has relatively low levels of carbon [6]. The produced gas can be utilised to generate power using IC engines [19].
The gasification process has advantages of reasonable costs, and flexibility of integrating the working conditions of temperature and equality ratio, and the reactor arrangement to obtain syngas [24]. The process is reported to improve the heating value of gas produced and has lesser quantities of residues compared to incineration and pyrolysis [19].
A report [24] indicates it is associated with the complexity to adapt to various characteristics of different waste and these usually prevent it from commercial applications. The issue is that the source of fuel for gasification will change over time due to variations in waste. Also, MSW in its raw form is usually not suitable for gasification and normally would need pre-treatment through mechanical preparation and separation to remove inert materials as well as glass, and metals [6]. The process suffers disposition of tars that causes blockages leading to operational challenges. This problem has been linked to plants failing and inefficiencies in some pilot and commercial-scale plants. However, it has been observed that when higher temperatures are applied, the tars ‘cracks’ and generate a relatively clean syngas. The plasma gasification technology is a high-temperature process that is potentially used at different stages in different configurations in the gasification process and the ash generated can be transformed into an inert residue under extremely high-temperature thermal methods. Also, other initiatives are set to ensure that the efficiencies of energy recovery from Gasifiers are maximised by using hydrogen fuel cells and gas engines [6]. Figure 13 shows a waste gasification plant in Lebanon which has a capacity of 64 tonnes/day to generate 420 kW. The waste (wood and tires) is collected and shredded into 1–3 inches and the sludge is blended on the site as well. The target moisture for post-treated waste is 30% for this specific site [45].
Waste gasification plant in Lebanon, Tennessee [
Uganda’s current waste management system involves both the private and public sectors and that the estimated solid waste generation rates for Uganda range between 0.55 and 0.6 kg/person/day [46, 47, 48]. The respective generation rates were based on studies done on Kampala district and Mukono district, respectively but this could be comparable to other districts. Further, a study revealed that waste generation rates in Uganda are 0.3 kg/day for low-income homes, and 0.66 kg/day for high-income homes and that the domestic (residential) sector of the country contributes 52% (ref. Table 1) of the waste generated [49]. However, this study was carried out from only the 9/15 of urban cities from the political-administrative regions of Uganda.
Sector | Contribution by weight | Characteristics |
---|---|---|
Domestic | 52 | Majority: food wastes |
Minority: plastics, paper, textiles, glass, ceramic, ashes, leather, compound wastes. | ||
Markets | 20 | Major: vegetable and fruit waste |
Minor: damaged packaging material like sacks and poly-ethene bags. | ||
Commercial minus markets | 8 | Major: packaging material, food waste, scrap metal |
Minor: glass, hazardous waste, containers | ||
Institutional | 5 | Major: food waste and stationery |
Minor: packaging material | ||
Industrial | 3 | Varies depending on the industry |
Health care | 1 | Major: domestic type |
Minor: hazardous wastes | ||
Others | 11 | Street sweeping, public park and construction waste. |
Waste in Uganda.
The different sectors generate mainly organic wastes (food waste) and the dry wastes are the minor forms of waste. Also, the waste composition of the industry sector varies depending on the type and all this data is illustrated in Table 1 [49]. Results in Table 1 are relative to a study carried out, by Okot-Okumu [46], to assess waste management in three significant towns in Uganda (Kampala, Jinja, and Lira) which revealed that the biodegradable composition of waste was higher that is 77.2, 78.6, and 68.7%, respectively. Also, a study [50] discovered that Kampala generates up to 28,000 tonnes of waste/month with an organic composition of 92.1% while plastic and paper account for only 5.9%. The reason for the difference could be that the former [46] examined solid waste from its origin to final dumping and was carried out using existing publications and reports while the latter [50] was carried out through sampling, field measurement, and laboratory tests of waste disposed at the Kiteezi landfill in Kampala for a year (July 2011–June 2012) to obtain the chemical composition. Nonetheless, both studies could imply that waste in Uganda mainly comprises of organic waste.
The most sought-after way of collecting waste is when waste producers move their waste to community collection sites such as bunkers or skips, and the waste is taken to landfills by the respective municipalities. In some cases, the private sector waste management companies collect waste from house to house but this is normally at a fee, or the larger institutions and commercial businesses hire the private companies to handle the waste [46]. It was found that communities with bad road access are avoided by collecting trucks which leads to high rates of open dumping as a means of disposal by the waste producers [50]. Also, reports point out that apart from poor road access, unaffordability when a waste collection fee is required is another cause of poor solid management [51]. Most of the urban areas in Uganda have waste released in gardens, along the road, open dumps, and channels. Figure 14 is an illustration of open dumping in urban areas of Uganda [48]. Open dumping poses environmental and health risks for the respective communities through pollution of soil, and surface water, degradation of the ecosystem as well as GHG emission when the organic waste decomposes [51, 53].
A display of open dumping in Kampala [
Reports [54] reveal that landfilling is the only authorised form of disposal currently in the country and other forms such as open dumping, uncontrolled burning, relative recycling, and composting which take place at unknown extents. Also, 40–45% of waste generated is gathered and thrown away to the landfills and that 11% is recycled by waste pickers [50, 51, 54]. This is comparable to a report that indicates 50% generated waste is collected. For Kampala city, all the waste collected is usually dumped on one landfill, Kiteezi, which is about 12 km from the city centre [50, 55]. This landfill is a sanitary landfill occupying 0.146 km2 of land with a leachate treatment system that decreases the biological oxygen before the leachate is discarded to the nearby wetland. Despite this initiative, residents around complain of bad odour, leachate leakages, and increased scattering of wastes by marabou stocks causing their land to lose value. Also, the openness and mismanagement of the landfills cause a problem of air pollution through GHG emissions which pose a health risk [46, 50].
The 2010 audit report for SWM in Kampala credits the inefficiencies in waste management to the lack of awareness which has led to aimless littering and uncontrolled burning of waste [56]. A study [46] points out that the record of waste collected accounts for that which reaches the community collection points and the uncollected waste is not recorded. This could be problem when identifying suitable management techniques due to insufficient waste data.
The mentioned studies are specific to just a few cities in the country with a major focus on the capital city Kampala. However, it is plausible to conclude that majority of waste produced in Uganda comprises organic waste with an overall composition of above 70%. This could also be assumed since the major economic activity is agriculture which is usually associated with organic waste.
A study [46] reports that the majority of the waste is mixed and there is no official structure of sorting waste in the country. Sorting may happen when workers segregate wastes of value on the way to the landfills or at the waste bunkers, road verges, skips, or at the landfills and this is illustrated in Figure 15. Most wastes hand-picked are plastics comprising of jerry cans, and bottles as well as cardboard. In some cases, the separation is done only when the producer is looking to reuse the plastic material or glass bottles or use food leftovers as animal feeds [46, 51]. Figure 16 is an image of plastic bottles collected for recycling.
Waste picker segregating waste at Kiteezi landfill [
Coca-Cola recycling plant at Kyambogo-Kampala Uganda [
The choice on which technology to adapt depends on the local conditions and energy requirements of the communities and/or sectors of a country. Because of these reasons, the Government of the UK always maintains an attitude of being technology-neutral when promoting private investment unless the technology shows evidence of market failure [7]. Also, knowledge of the organic fraction, calorific value, and chemical composition enables a country to know how best to manage the waste [11].
Therefore, the successful implementation of anaerobic digestion in Uganda would largely depend on waste generated from agriculture and reports that the residential and market sectors generate more than 72% of the waste which largely comprises of food waste. The waste from these sectors has a high moisture content which would accelerate production of biogas.
It would be suitable to meet the energy needs of these market structures while solving the problem of food waste management. Also, in Section 3 it is mentioned that the yield of anaerobic digestion is higher when food waste is fed into the digesters along with MSW could make this technology a reliable source of energy in residential households, and markets in Uganda since they generate mostly food waste. The country could adopt large scale anaerobic digestion like the Gorge anaerobic digestion plant in Kenya highlighted in (Section 3) where the waste from farms is used to generate electricity for farm activities. In the long run, the biogas generated from large scale projects can used in the transportation sector as a source of fuel which could introduce flexi-fuel vehicles that use both petroleum and bio-methane [58].
Regarding WTE incineration, the technology is more efficient when the CV of the waste is high. Uganda’s waste has a CV of 6.2 MJ/kg which is below the typical range for raw waste highlighted in Section 3 hence the country could apply the circulating fluidised bed combustion technology which permits waste with low CV. However, this type of incinerator processes lower quantities of waste compared to the grate-based combustion technology. An alternative would be to pre-treat the waste to increase the efficiency of the plant. Overall, the application of incineration would generate electricity that would meet the demands of manufacturing industries and surrounding communities to promote energy security. For example, a similar project like the Reppie plant in Ethiopia could be set up in Uganda to process waste to generate about 20 MW of electricity. Such a project is comparable because Ethiopia is reported to have waste compositions comprising of 60% organic waste [59, 60] which is similar Uganda. Also, this plant has a pre-treatment section to increase the energy content in the waste. Such a plant could process waste from Kampala which is estimated to generate 28,000 tonnes/month ≈ 930 tonnes/day [50]. Such projects could be implemented around the country to reduce the quantity of waste that goes to the landfills and to improve energy security.
In Section 3 it is noted that the incineration plant is more efficient when it generates heat or both heat and power. The heat produced may be wasted since district supply heating systems are not necessary as the country’s temperatures are relatively warm throughout the year (26°C [61]) hence household or commercial heating is not required. However, the heat produced can be used for heating processes in nearby factories.
Concerning landfill gas recovery, this technology would require sufficient land to implement. In Section 3 an average landfill site occupies 600 acres but with the current size of Uganda and the high rate of population increase, the application of landfill gas recovery would be affected by shortage of land. Also, the landfill sites would have to be away from the growing cities due to the high rates of urbanisation in the country. Nonetheless, this mechanism would still be applicable in parts of the country that are less populated and have sufficient land. This would however incur costs to transport waste generated to such locations. Comparing landfills and anaerobic digestion, the former generates lower fractions of methane than the latter and so it would be advisable to consider anaerobic digestion.
Turning now to pyrolysis and gasification, Section 3 reveals that the processes are difficult to scale up hence cannot be used for large scale purposes and commercial purposes due to their complexities in fuel requirements. However, these technologies could be adopted by industries, specifically the rotary kiln type of reactor which offers the advantage proper heat transfer allowing it to process waste polymers (plastics) which have low thermal conductivity and generate the best quality oil suitable for industrial purposes. However, Uganda has low generation rates of waste polymers (dry waste) and projections indicate low dry waste generation in the next decade hence such technologies could be unsustainable in the long run.
Regarding waste as a fuel, [7] the waste needs to be appropriate for the technology in question. Reports state that the inadequacy in the supply of feedstock to biogas plants is a barrier to the technologies. This could be comparable to the other technologies [62]. Anaerobic digestion, incineration, and pyrolysis need the waste to be pre-treated through separation, sorting, processing and mixing with additives to optimise efficiency, increase the calorific values, and reduce levels of pollution [31]. In observed that fossil fuel-based wastes emit GHG which contribute to climate change, which is another reason to why waste should be separated. Literature reports that lack of waste separation has led to the failure of large-scale bio-methanation in India [63]. Therefore, Uganda would have inconsistencies in the waste fuel due to lack of separation leading to mixed wastes and this could affect the sustainability in the long run. This will also increase costs incurred by the plants to mechanically treat waste. Nonetheless, these technologies could still be adopted by manufacturing industries in Uganda which are more consistent in the characteristics of waste as per industry, for example, Kakira Sugar factory processes bagasse to produce heat and electricity.
Also, lack of separation could lead to hazardous materials in the waste which pose the risk of generating toxic chemicals in solid and gaseous residues from the processes that are later disposed of. However, Uganda has low levels of industrialisation and it would seem unlikely to have large quantities of harmful material in the waste which could make mechanical separation easier. In addition, Uganda would need to improve her collection efficiencies from 45% to the daily target of 80% to ensure the plants have a consistent supply of fuel. A study [24] claims that when technology can work with inconsistent fuels then it is feasible for such communities and in this case landfill gas recovery would be the most suitable.
Lastly it is noted in Section 3 that the different designs and configurations of anaerobic digestion require the use of water to optimise the digestion of MSW. This is a could be a major problem since reports [53] show that the availability of water is limited in densely populated regions of Uganda and that 76% of Ugandans have water within reach of 1 km. To solve this, the country could focus on using the high solid continuous digestion systems which require little water (Section 3(1)). The supply of biogas is inadequate to meet the needs of a community, they resort to the rudimentary sources of fuel [62]. This concern would be comparable to the other WTE technologies as the choice by beneficiaries to adopt any technology is most likely dependent on reliability.
Regarding consistency, that waste-sorting has a significant effect on the efficiency of all technologies and since Uganda lacks waste separation regulations this will affect the output of the technologies which will in turn affect the revenue flows [64]. The National Environment (Waste Management) Regulations, S.I. No 52/1999 under sections 53(2) and 107 of the National Environment Act, Cap 153 [65], shows no mandate which directs a waste producer to explicitly separate the waste generated according to physical or chemical composition. This causes a problem of delivering mixed waste that makes it hard for plants to have consistency in the physical and chemical composition of waste which could affect the sustainability of plants in the long run. A lot of effort would then be needed to sort waste before extracting the energy and these extra costs may not be attractive to investors. Also, these extra costs may lead to a rise in the cost of electricity purchased by the customers. To mitigate these, the GOU could enforce some of the UK’s policies (Table 2) to enhance better SWM. Also, awareness campaigns through media platforms and community focus groups can help solve the problem of waste segregation to improve the efficiency of WTE initiatives [62].
Policy | Impact | |
---|---|---|
1 | Keep waste at minimum through prevention, recycling, or recovery through policies like placing charges on carrier bags has pushed for recycling within communities | This could prevent WTE from competing with recycling |
It could lessen the volume of waste sent to landfills | ||
2 | Store waste securely, use suitable containers to avoid leakages, ensure containers are waterproof. Containers must be labelled clearly to indicate the type of waste contained. | This will enhance waste separation allowing WTE technologies to have consistent fuels |
Promotes consistency in waste fuels and eases the mechanical separation of the WTE plants | ||
3 | Store different types of waste separately to avoid contamination, and to permit reuse and recovery | This will enhance waste separation allowing WTE technologies to have consistent fuels |
4 | Waste producer must classify their waste to the waste contractor before sending it for disposal or recycling | Promotes consistency in the waste fuels and eases the mechanical separation at WTE plants |
5 | It is illicit to mix hazardous and non-hazardous waste and there are guidelines to enable a waste producer to identify the types. | Mitigates the pollution that would arise |
Protects the environment from harmful substances | ||
6 | The Government of the UK provides a platform to report fly-tipping (illegal waste dumping). In Northern Ireland, it is required to report a waste producer who intentionally labels waste inappropriately. Also, the law permits reporting littering along local streets | Reduce open dumping |
Ensures that all waste is collected appropriately allowing plants to have enough waste fuel | ||
7 | For an operator to carry out waste treatment, some rules and regulations that must be followed to protect the environment | Ensures all waste is collected appropriately allowing plants to have enough waste fuel |
Ensures pollution control systems are in place |
A review of some of the UK’s waste management regulations [66].
A limitation of this study is the lack of sufficient data on SWM in Uganda. The research has identified that little effort has been directed towards the implementation of WTE in Uganda as most studies have been focused on the waste generation and composition and specific to just a few major cities in the country. Another limitation is that majority of the data is not up to date. Greater efforts are needed to ensure that more resources are directed towards SWM studies all over the country with a special emphasis on promoting designs and programs to mitigate the weaknesses in the system as a way of easing the work of potential developers.
An alternative area of research could be a case when the GOU partly or fully finances the projects to waive the financial burden on the citizens. With this, the government could register the projects under CDM and gain carbon credits that can be sold to the open market. Also, such projects would be associated with job creation, improved energy security, and reduced deforestation. It is important to realise that the economics and environmental benefits could be difficult to evaluate by the GOU however success in SWM by a municipality was noted as a guarantee to thrive in other sectors.
The purpose of this chapter was to evaluate how and why Uganda could adopt WTE technologies to reduce waste volumes. The continual increase in the waste generation rate is evidence that there is a need for Uganda to assess different waste management techniques. The proposed WTE techniques are landfill gas recovery, anaerobic digestion, incineration, pyrolysis, and gasification, and the following are the observations.
Firstly, all WTE technologies are applicable in Uganda because the different sectors differ in energy needs. From this, the GOU needs to remain technologically neutral when promoting WTE. Anaerobic digestion would be the most reliable since most of the waste in Uganda is organic waste mainly from agricultural activities. It is also feasible in residential homes on a small scale to meet heating and cooking needs and in turn, would reduce the use of wood fuels which are associated with health risks and deforestation. Incineration is also considered but because of the reported low CV of Uganda’s waste, such a plant would need to pre-treat the waste to increase the CV. Gasification and pyrolysis are noted to be more advanced and better in terms of the products but difficult to scale up due to the technological limitations and their complexity in adapting to inconsistent waste. However, pyrolysis and gasification could be applicable in industries to improve energy security and reduce the demand on the national grid. Landfill gas recovery could be applied at any abandoned site, but it would be limited by a shortage of land near the cities especially with the growing populations. Also, the by-products like biogas and bio-oil could be adopted in the transportation sector in the long run. This would reduce the country’s dependency on imported fuels.
Secondly, it is noted that the sustainability of these technologies is greatly affected by the composition of waste as a fuel and the waste must be consistent in physical and chemical composition. Consistency can be guaranteed when Uganda improves waste collection techniques by enforcing the proposed laws and regulations that promote waste separation and efficient waste collection. This would also ensure that WTE plants have enough waste to maximise efficiency. Also, the separation of waste is key in limiting pollution associated with the thermo-chemical processes since it enables the removal of hazardous material.
Finally, WTE must not rival prevention, recycling, and reuse but should complement them when the possibilities are exhausted. This could in turn decrease the amount of waste taken to the landfills. Also, WTE initiatives should not be used as an excuse to generate waste. The country could adopt the waste management hierarchy through awareness programs and enforcing laws and regulations to impact people’s behaviours and attitudes leading to reduced quantities of waste generated, to mitigate the issue of open dumping and other associated issues rising from poor waste management.
This is a brief overview of the main steps involved in publishing with IntechOpen Compacts, Monographs and Edited Books. Once you submit your proposal you will be appointed a Author Service Manager who will be your single point of contact and lead you through all the described steps below.
",metaTitle:"Publishing Process Steps and Descriptions",metaDescription:"This is a brief overview of the main steps involved in publishing with InTechOpen Compacts, Monographs and Edited Books. Once you submit your proposal you will be appointed a Publishing Process Manager who will be your single point of contact and lead you through all the described steps below.",metaKeywords:null,canonicalURL:"page/publishing-process-steps",contentRaw:'[{"type":"htmlEditorComponent","content":"1. SEND YOUR PROPOSAL
\\n\\nPlease complete the publishing proposal form. The completed form should serve as an overview of your future Compacts, Monograph or Edited Book. Once submitted, your publishing proposal will be sent for evaluation, and a notice of acceptance or rejection will be sent within 10 to 30 working days from the date of submission.
\\n\\n2. SUBMIT YOUR MANUSCRIPT
\\n\\nAfter approval, you will proceed in submitting your full-length manuscript. 50-130 pages for compacts, 130-500 for Monographs & Edited Books.Your full-length manuscript must follow IntechOpen's Author Guidelines and comply with our publishing rules. Once the manuscript is submitted, but before it is forwarded for peer review, it will be screened for plagiarism.
\\n\\n3. PEER REVIEW RESULTS
\\n\\nExternal reviewers will evaluate your manuscript and provide you with their feedback. You may be asked to revise your draft, or parts of your draft, provide additional information and make any other necessary changes according to their comments and suggestions.
\\n\\n4. ACCEPTANCE AND PRICE QUOTE
\\n\\nIf the manuscript is formally accepted after peer review you will receive a formal Notice of Acceptance, and a price quote.
\\n\\nThe Open Access Publishing Fee of your IntechOpen Compacts, Monograph or Edited Book depends on the volume of the publication and includes: project management, editorial and peer review services, technical editing, language copyediting, cover design and book layout, book promotion and ISBN assignment.
\\n\\nWe will send you your price quote and after it has been accepted (by both the author and the publisher), both parties will sign a Statement of Work binding them to adhere to the agreed upon terms.
\\n\\nAt this step you will also be asked to accept the Copyright Agreement.
\\n\\n5. LANGUAGE COPYEDITING, TECHNICAL EDITING AND TYPESET PROOF
\\n\\nYour manuscript will be sent to Straive, a leader in content solution services, for language copyediting. You will then receive a typeset proof formatted in XML and available online in HTML and PDF to proofread and check for completeness. The first typeset proof of your manuscript is usually available 10 days after its original submission.
\\n\\nAfter we receive your proof corrections and a final typeset of the manuscript is approved, your manuscript is sent to our in house DTP department for technical formatting and online publication preparation.
\\n\\nAdditionally, you will be asked to provide a profile picture (face or chest-up portrait photograph) and a short summary of the book which is required for the book cover design.
\\n\\n6. INVOICE PAYMENT
\\n\\nThe invoice is generally paid by the author, the author’s institution or funder. The payment can be made by credit card from your Author Panel (one will be assigned to you at the beginning of the project), or via bank transfer as indicated on the invoice. We currently accept the following payment options:
\\n\\nIntechOpen will help you complete your payment safely and securely, keeping your personal, professional and financial information safe.
\\n\\n7. ONLINE PUBLICATION, PRINT AND DELIVERY OF THE BOOK
\\n\\nIntechOpen authors can choose whether to publish their book online only or opt for online and print editions. IntechOpen Compacts, Monographs and Edited Books will be published on www.intechopen.com. If ordered, print copies are delivered by DHL within 12 to 15 working days.
\\n\\nIf you feel that IntechOpen Compacts, Monographs or Edited Books are the right publishing format for your work, please fill out the publishing proposal form. For any specific queries related to the publishing process, or IntechOpen Compacts, Monographs & Edited Books in general, please contact us at book.department@intechopen.com
\\n"}]'},components:[{type:"htmlEditorComponent",content:'1. SEND YOUR PROPOSAL
\n\nPlease complete the publishing proposal form. The completed form should serve as an overview of your future Compacts, Monograph or Edited Book. Once submitted, your publishing proposal will be sent for evaluation, and a notice of acceptance or rejection will be sent within 10 to 30 working days from the date of submission.
\n\n2. SUBMIT YOUR MANUSCRIPT
\n\nAfter approval, you will proceed in submitting your full-length manuscript. 50-130 pages for compacts, 130-500 for Monographs & Edited Books.Your full-length manuscript must follow IntechOpen's Author Guidelines and comply with our publishing rules. Once the manuscript is submitted, but before it is forwarded for peer review, it will be screened for plagiarism.
\n\n3. PEER REVIEW RESULTS
\n\nExternal reviewers will evaluate your manuscript and provide you with their feedback. You may be asked to revise your draft, or parts of your draft, provide additional information and make any other necessary changes according to their comments and suggestions.
\n\n4. ACCEPTANCE AND PRICE QUOTE
\n\nIf the manuscript is formally accepted after peer review you will receive a formal Notice of Acceptance, and a price quote.
\n\nThe Open Access Publishing Fee of your IntechOpen Compacts, Monograph or Edited Book depends on the volume of the publication and includes: project management, editorial and peer review services, technical editing, language copyediting, cover design and book layout, book promotion and ISBN assignment.
\n\nWe will send you your price quote and after it has been accepted (by both the author and the publisher), both parties will sign a Statement of Work binding them to adhere to the agreed upon terms.
\n\nAt this step you will also be asked to accept the Copyright Agreement.
\n\n5. LANGUAGE COPYEDITING, TECHNICAL EDITING AND TYPESET PROOF
\n\nYour manuscript will be sent to Straive, a leader in content solution services, for language copyediting. You will then receive a typeset proof formatted in XML and available online in HTML and PDF to proofread and check for completeness. The first typeset proof of your manuscript is usually available 10 days after its original submission.
\n\nAfter we receive your proof corrections and a final typeset of the manuscript is approved, your manuscript is sent to our in house DTP department for technical formatting and online publication preparation.
\n\nAdditionally, you will be asked to provide a profile picture (face or chest-up portrait photograph) and a short summary of the book which is required for the book cover design.
\n\n6. INVOICE PAYMENT
\n\nThe invoice is generally paid by the author, the author’s institution or funder. The payment can be made by credit card from your Author Panel (one will be assigned to you at the beginning of the project), or via bank transfer as indicated on the invoice. We currently accept the following payment options:
\n\nIntechOpen will help you complete your payment safely and securely, keeping your personal, professional and financial information safe.
\n\n7. ONLINE PUBLICATION, PRINT AND DELIVERY OF THE BOOK
\n\nIntechOpen authors can choose whether to publish their book online only or opt for online and print editions. IntechOpen Compacts, Monographs and Edited Books will be published on www.intechopen.com. If ordered, print copies are delivered by DHL within 12 to 15 working days.
\n\nIf you feel that IntechOpen Compacts, Monographs or Edited Books are the right publishing format for your work, please fill out the publishing proposal form. For any specific queries related to the publishing process, or IntechOpen Compacts, Monographs & Edited Books in general, please contact us at book.department@intechopen.com
\n'}]},successStories:{items:[]},authorsAndEditors:{filterParams:{},profiles:[{id:"396",title:"Dr.",name:"Vedran",middleName:null,surname:"Kordic",slug:"vedran-kordic",fullName:"Vedran Kordic",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/396/images/7281_n.png",biography:"After obtaining his Master's degree in Mechanical Engineering he continued his education at the Vienna University of Technology where he obtained his PhD degree in 2004. He worked as a researcher at the Automation and Control Institute, Faculty of Electrical Engineering, Vienna University of Technology until 2008. His studies in robotics lead him not only to a PhD degree but also inspired him to co-found and build the International Journal of Advanced Robotic Systems - world's first Open Access journal in the field of robotics.",institutionString:null,institution:{name:"TU Wien",country:{name:"Austria"}}},{id:"441",title:"Ph.D.",name:"Jaekyu",middleName:null,surname:"Park",slug:"jaekyu-park",fullName:"Jaekyu Park",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/441/images/1881_n.jpg",biography:null,institutionString:null,institution:{name:"LG Corporation (South Korea)",country:{name:"Korea, South"}}},{id:"465",title:"Dr",name:"Christian",middleName:null,surname:"Martens",slug:"christian-martens",fullName:"Christian Martens",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"479",title:"Dr.",name:"Valentina",middleName:null,surname:"Colla",slug:"valentina-colla",fullName:"Valentina Colla",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/479/images/358_n.jpg",biography:null,institutionString:null,institution:{name:"Sant'Anna School of Advanced Studies",country:{name:"Italy"}}},{id:"494",title:"PhD",name:"Loris",middleName:null,surname:"Nanni",slug:"loris-nanni",fullName:"Loris Nanni",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/494/images/system/494.jpg",biography:"Loris Nanni received his Master Degree cum laude on June-2002 from the University of Bologna, and the April 26th 2006 he received his Ph.D. in Computer Engineering at DEIS, University of Bologna. On September, 29th 2006 he has won a post PhD fellowship from the university of Bologna (from October 2006 to October 2008), at the competitive examination he was ranked first in the industrial engineering area. He extensively served as referee for several international journals. He is author/coauthor of more than 100 research papers. He has been involved in some projects supported by MURST and European Community. His research interests include pattern recognition, bioinformatics, and biometric systems (fingerprint classification and recognition, signature verification, face recognition).",institutionString:null,institution:null},{id:"496",title:"Dr.",name:"Carlos",middleName:null,surname:"Leon",slug:"carlos-leon",fullName:"Carlos Leon",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Seville",country:{name:"Spain"}}},{id:"512",title:"Dr.",name:"Dayang",middleName:null,surname:"Jawawi",slug:"dayang-jawawi",fullName:"Dayang Jawawi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Technology Malaysia",country:{name:"Malaysia"}}},{id:"528",title:"Dr.",name:"Kresimir",middleName:null,surname:"Delac",slug:"kresimir-delac",fullName:"Kresimir Delac",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/528/images/system/528.jpg",biography:"K. Delac received his B.Sc.E.E. degree in 2003 and is currentlypursuing a Ph.D. degree at the University of Zagreb, Faculty of Electrical Engineering andComputing. His current research interests are digital image analysis, pattern recognition andbiometrics.",institutionString:null,institution:{name:"University of Zagreb",country:{name:"Croatia"}}},{id:"557",title:"Dr.",name:"Andon",middleName:"Venelinov",surname:"Topalov",slug:"andon-topalov",fullName:"Andon Topalov",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/557/images/1927_n.jpg",biography:"Dr. Andon V. Topalov received the MSc degree in Control Engineering from the Faculty of Information Systems, Technologies, and Automation at Moscow State University of Civil Engineering (MGGU) in 1979. He then received his PhD degree in Control Engineering from the Department of Automation and Remote Control at Moscow State Mining University (MGSU), Moscow, in 1984. From 1985 to 1986, he was a Research Fellow in the Research Institute for Electronic Equipment, ZZU AD, Plovdiv, Bulgaria. In 1986, he joined the Department of Control Systems, Technical University of Sofia at the Plovdiv campus, where he is presently a Full Professor. He has held long-term visiting Professor/Scholar positions at various institutions in South Korea, Turkey, Mexico, Greece, Belgium, UK, and Germany. And he has coauthored one book and authored or coauthored more than 80 research papers in conference proceedings and journals. His current research interests are in the fields of intelligent control and robotics.",institutionString:null,institution:{name:"Technical University of Sofia",country:{name:"Bulgaria"}}},{id:"585",title:"Prof.",name:"Munir",middleName:null,surname:"Merdan",slug:"munir-merdan",fullName:"Munir Merdan",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/585/images/system/585.jpg",biography:"Munir Merdan received the M.Sc. degree in mechanical engineering from the Technical University of Sarajevo, Bosnia and Herzegovina, in 2001, and the Ph.D. degree in electrical engineering from the Vienna University of Technology, Vienna, Austria, in 2009.Since 2005, he has been at the Automation and Control Institute, Vienna University of Technology, where he is currently a Senior Researcher. His research interests include the application of agent technology for achieving agile control in the manufacturing environment.",institutionString:null,institution:null},{id:"605",title:"Prof",name:"Dil",middleName:null,surname:"Hussain",slug:"dil-hussain",fullName:"Dil Hussain",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/605/images/system/605.jpg",biography:"Dr. Dil Muhammad Akbar Hussain is a professor of Electronics Engineering & Computer Science at the Department of Energy Technology, Aalborg University Denmark. Professor Akbar has a Master degree in Digital Electronics from Govt. College University, Lahore Pakistan and a P-hD degree in Control Engineering from the School of Engineering and Applied Sciences, University of Sussex United Kingdom. Aalborg University has Two Satellite Campuses, one in Copenhagen (Aalborg University Copenhagen) and the other in Esbjerg (Aalborg University Esbjerg).\n· He is a member of prestigious IEEE (Institute of Electrical and Electronics Engineers), and IAENG (International Association of Engineers) organizations. \n· He is the chief Editor of the Journal of Software Engineering.\n· He is the member of the Editorial Board of International Journal of Computer Science and Software Technology (IJCSST) and International Journal of Computer Engineering and Information Technology. \n· He is also the Editor of Communication in Computer and Information Science CCIS-20 by Springer.\n· Reviewer For Many Conferences\nHe is the lead person in making collaboration agreements between Aalborg University and many universities of Pakistan, for which the MOU’s (Memorandum of Understanding) have been signed.\nProfessor Akbar is working in Academia since 1990, he started his career as a Lab demonstrator/TA at the University of Sussex. After finishing his P. hD degree in 1992, he served in the Industry as a Scientific Officer and continued his academic career as a visiting scholar for a number of educational institutions. In 1996 he joined National University of Science & Technology Pakistan (NUST) as an Associate Professor; NUST is one of the top few universities in Pakistan. In 1999 he joined an International Company Lineo Inc, Canada as Manager Compiler Group, where he headed the group for developing Compiler Tool Chain and Porting of Operating Systems for the BLACKfin processor. The processor development was a joint venture by Intel and Analog Devices. In 2002 Lineo Inc., was taken over by another company, so he joined Aalborg University Denmark as an Assistant Professor.\nProfessor Akbar has truly a multi-disciplined career and he continued his legacy and making progress in many areas of his interests both in teaching and research. He has contributed in stochastic estimation of control area especially, in the Multiple Target Tracking and Interactive Multiple Model (IMM) research, Ball & Beam Control Problem, Robotics, Levitation Control. He has contributed in developing Algorithms for Fingerprint Matching, Computer Vision and Face Recognition. He has been supervising Pattern Recognition, Formal Languages and Distributed Processing projects for several years. He has reviewed many books on Management, Computer Science. Currently, he is an active and permanent reviewer for many international conferences and symposia and the program committee member for many international conferences.\nIn teaching he has taught the core computer science subjects like, Digital Design, Real Time Embedded System Programming, Operating Systems, Software Engineering, Data Structures, Databases, Compiler Construction. In the Engineering side, Digital Signal Processing, Computer Architecture, Electronics Devices, Digital Filtering and Engineering Management.\nApart from his Academic Interest and activities he loves sport especially, Cricket, Football, Snooker and Squash. He plays cricket for Esbjerg city in the second division team as an opener wicket keeper batsman. He is a very good player of squash but has not played squash since his arrival in Denmark.",institutionString:null,institution:null},{id:"611",title:"Prof.",name:"T",middleName:null,surname:"Nagarajan",slug:"t-nagarajan",fullName:"T Nagarajan",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Universiti Teknologi Petronas",country:{name:"Malaysia"}}}],filtersByRegion:[{group:"region",caption:"North America",value:1,count:6675},{group:"region",caption:"Middle and South America",value:2,count:5955},{group:"region",caption:"Africa",value:3,count:2460},{group:"region",caption:"Asia",value:4,count:12718},{group:"region",caption:"Australia and Oceania",value:5,count:1018},{group:"region",caption:"Europe",value:6,count:17721}],offset:12,limit:12,total:134203},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{topicId:"12"},books:[{type:"book",id:"10845",title:"Marine Ecosystems - Biodiversity, Ecosystem Services and Human Impacts",subtitle:null,isOpenForSubmission:!0,hash:"727e7eb3d4ba529ec5eb4f150e078523",slug:null,bookSignature:"Dr. Ana M.M. Marta Gonçalves",coverURL:"https://cdn.intechopen.com/books/images_new/10845.jpg",editedByType:null,editors:[{id:"320124",title:"Dr.",name:"Ana M.M.",surname:"Gonçalves",slug:"ana-m.m.-goncalves",fullName:"Ana M.M. Gonçalves"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11450",title:"Environmental Impacts of COVID-19 Pandemic on the World",subtitle:null,isOpenForSubmission:!0,hash:"a58c7b02d07903004be70f744f2e1835",slug:null,bookSignature:"Prof. Mohamed Nageeb Rashed and Prof. Wafaa M. Abd El-Rahim",coverURL:"https://cdn.intechopen.com/books/images_new/11450.jpg",editedByType:null,editors:[{id:"63465",title:"Prof.",name:"Mohamed Nageeb",surname:"Rashed",slug:"mohamed-nageeb-rashed",fullName:"Mohamed Nageeb Rashed"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11457",title:"Forest Degradation Under Global Change",subtitle:null,isOpenForSubmission:!0,hash:"8df7150b01ae754024c65d1a62f190d9",slug:null,bookSignature:"Dr. Pavel Samec",coverURL:"https://cdn.intechopen.com/books/images_new/11457.jpg",editedByType:null,editors:[{id:"317087",title:"Dr.",name:"Pavel",surname:"Samec",slug:"pavel-samec",fullName:"Pavel Samec"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11650",title:"Aquifers - New Insights",subtitle:null,isOpenForSubmission:!0,hash:"27c1a2a053cb1d83de903c5b969bc3a2",slug:null,bookSignature:"Dr. Abhay Soni and Dr. Prabhat Jain",coverURL:"https://cdn.intechopen.com/books/images_new/11650.jpg",editedByType:null,editors:[{id:"271093",title:"Dr.",name:"Abhay",surname:"Soni",slug:"abhay-soni",fullName:"Abhay Soni"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11665",title:"Recent Advances in Wildlife Management",subtitle:null,isOpenForSubmission:!0,hash:"73da0df494a1a56ab9c4faf2ee811899",slug:null,bookSignature:"Dr. Farzana Khan Perveen",coverURL:"https://cdn.intechopen.com/books/images_new/11665.jpg",editedByType:null,editors:[{id:"75563",title:"Dr.",name:"Farzana Khan",surname:"Perveen",slug:"farzana-khan-perveen",fullName:"Farzana Khan Perveen"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11666",title:"Soil Contamination - Recent Advances and Future Perspectives",subtitle:null,isOpenForSubmission:!0,hash:"c8890038b86fb6e5af16ea3c22669ae9",slug:null,bookSignature:"Dr. Adnan Mustafa and Dr. Muhammad Naveed",coverURL:"https://cdn.intechopen.com/books/images_new/11666.jpg",editedByType:null,editors:[{id:"299110",title:"Dr.",name:"Adnan",surname:"Mustafa",slug:"adnan-mustafa",fullName:"Adnan Mustafa"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11668",title:"Mercury Pollution",subtitle:null,isOpenForSubmission:!0,hash:"0bd111f57835089cad4a9741326dbab7",slug:null,bookSignature:"Dr. Ahmed Abdelhafez and Dr. Mohamed Abbas",coverURL:"https://cdn.intechopen.com/books/images_new/11668.jpg",editedByType:null,editors:[{id:"196849",title:"Dr.",name:"Ahmed",surname:"Abdelhafez",slug:"ahmed-abdelhafez",fullName:"Ahmed Abdelhafez"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"12130",title:"Sustainable Built Environment",subtitle:null,isOpenForSubmission:!0,hash:"ed1dbae71b967e06efb049208f0c1068",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/12130.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"12131",title:"Climate Change and Fires",subtitle:null,isOpenForSubmission:!0,hash:"ea0858f07a3e87aaf9e5eaa75b4b44bd",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/12131.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"12180",title:"Wetlands",subtitle:null,isOpenForSubmission:!0,hash:"8957c5c2baaed32223f911a6d4aa5a03",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/12180.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"12221",title:"Air Pollution",subtitle:null,isOpenForSubmission:!0,hash:"439a018ee0c4960560cb798601f2a372",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/12221.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"12222",title:"Advances and Challenges in Microplastics",subtitle:null,isOpenForSubmission:!0,hash:"a36734a551e0997d2255f6ce99eff818",slug:null,bookSignature:"Prof. El-Sayed Salama",coverURL:"https://cdn.intechopen.com/books/images_new/12222.jpg",editedByType:null,editors:[{id:"347657",title:"Prof.",name:"El-Sayed",surname:"Salama",slug:"el-sayed-salama",fullName:"El-Sayed Salama"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:36},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:12},{group:"topic",caption:"Business, Management and Economics",value:7,count:7},{group:"topic",caption:"Chemistry",value:8,count:22},{group:"topic",caption:"Computer and Information Science",value:9,count:23},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:15},{group:"topic",caption:"Engineering",value:11,count:61},{group:"topic",caption:"Environmental Sciences",value:12,count:9},{group:"topic",caption:"Immunology and Microbiology",value:13,count:15},{group:"topic",caption:"Materials Science",value:14,count:24},{group:"topic",caption:"Mathematics",value:15,count:11},{group:"topic",caption:"Medicine",value:16,count:108},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:6},{group:"topic",caption:"Neuroscience",value:18,count:3},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:9},{group:"topic",caption:"Physics",value:20,count:9},{group:"topic",caption:"Psychology",value:21,count:9},{group:"topic",caption:"Robotics",value:22,count:2},{group:"topic",caption:"Social Sciences",value:23,count:9},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:3}],offset:12,limit:12,total:14},popularBooks:{featuredBooks:[{type:"book",id:"10858",title:"MOOC (Massive Open Online Courses)",subtitle:null,isOpenForSubmission:!1,hash:"d32f86793bc72dde32532f509b1ec5b0",slug:"mooc-massive-open-online-courses-",bookSignature:"Dragan Cvetković",coverURL:"https://cdn.intechopen.com/books/images_new/10858.jpg",editors:[{id:"101330",title:"Dr.",name:"Dragan",middleName:"Mladen",surname:"Cvetković",slug:"dragan-cvetkovic",fullName:"Dragan Cvetković"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10195",title:"Serotonin and the CNS",subtitle:"New Developments in Pharmacology and Therapeutics",isOpenForSubmission:!1,hash:"7ed9d96da98233a885bd2869a8056c36",slug:"serotonin-and-the-cns-new-developments-in-pharmacology-and-therapeutics",bookSignature:"Berend Olivier",coverURL:"https://cdn.intechopen.com/books/images_new/10195.jpg",editors:[{id:"71579",title:"Prof.",name:"Berend",middleName:null,surname:"Olivier",slug:"berend-olivier",fullName:"Berend Olivier"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10755",title:"Corporate Governance",subtitle:"Recent Advances and Perspectives",isOpenForSubmission:!1,hash:"ffe06d1d5c4bf0fc2e63511825fe1257",slug:"corporate-governance-recent-advances-and-perspectives",bookSignature:"Okechukwu Lawrence Emeagwali and Feyza Bhatti",coverURL:"https://cdn.intechopen.com/books/images_new/10755.jpg",editors:[{id:"196317",title:"Associate Prof.",name:"Okechukwu Lawrence",middleName:null,surname:"Emeagwali",slug:"okechukwu-lawrence-emeagwali",fullName:"Okechukwu Lawrence Emeagwali"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11120",title:"Environmental Impact and Remediation of Heavy Metals",subtitle:null,isOpenForSubmission:!1,hash:"9e77514288e7394f1e6cd13481af3509",slug:"environmental-impact-and-remediation-of-heavy-metals",bookSignature:"Hosam M. Saleh and Amal I. Hassan",coverURL:"https://cdn.intechopen.com/books/images_new/11120.jpg",editors:[{id:"144691",title:"Prof.",name:"Hosam M.",middleName:null,surname:"Saleh",slug:"hosam-m.-saleh",fullName:"Hosam M. Saleh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10901",title:"Grapes and Wine",subtitle:null,isOpenForSubmission:!1,hash:"5d7f2aa74874444bc6986e613ccebd7c",slug:"grapes-and-wine",bookSignature:"Antonio Morata, Iris Loira and Carmen González",coverURL:"https://cdn.intechopen.com/books/images_new/10901.jpg",editors:[{id:"180952",title:"Prof.",name:"Antonio",middleName:null,surname:"Morata",slug:"antonio-morata",fullName:"Antonio Morata"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11080",title:"Engineering Principles",subtitle:"Welding and Residual Stresses",isOpenForSubmission:!1,hash:"6c07a13a113bce94174b40096f30fb5e",slug:"engineering-principles-welding-and-residual-stresses",bookSignature:"Kavian Omar Cooke and Ronaldo Câmara Cozza",coverURL:"https://cdn.intechopen.com/books/images_new/11080.jpg",editors:[{id:"138778",title:"Dr.",name:"Kavian",middleName:"Omar",surname:"Cooke",slug:"kavian-cooke",fullName:"Kavian Cooke"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11332",title:"Essential Oils",subtitle:"Advances in Extractions and Biological Applications",isOpenForSubmission:!1,hash:"742e6cae3a35686f975edc8d7f9afa94",slug:"essential-oils-advances-in-extractions-and-biological-applications",bookSignature:"Mozaniel Santana de Oliveira and Eloisa Helena de Aguiar Andrade",coverURL:"https://cdn.intechopen.com/books/images_new/11332.jpg",editors:[{id:"195290",title:"Ph.D.",name:"Mozaniel",middleName:null,surname:"Santana De Oliveira",slug:"mozaniel-santana-de-oliveira",fullName:"Mozaniel Santana De Oliveira"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11029",title:"Hepatitis B",subtitle:null,isOpenForSubmission:!1,hash:"609701f502efc3538c112ff47a2c2119",slug:"hepatitis-b",bookSignature:"Luis Rodrigo",coverURL:"https://cdn.intechopen.com/books/images_new/11029.jpg",editors:[{id:"73208",title:"Prof.",name:"Luis",middleName:null,surname:"Rodrigo",slug:"luis-rodrigo",fullName:"Luis Rodrigo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9537",title:"Human Rights in the Contemporary World",subtitle:null,isOpenForSubmission:!1,hash:"54f05b93812fd434f3962956d6413a6b",slug:"human-rights-in-the-contemporary-world",bookSignature:"Trudy Corrigan",coverURL:"https://cdn.intechopen.com/books/images_new/9537.jpg",editors:[{id:"197557",title:"Dr.",name:"Trudy",middleName:null,surname:"Corrigan",slug:"trudy-corrigan",fullName:"Trudy Corrigan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11371",title:"Cerebral Circulation",subtitle:"Updates on Models, Diagnostics and Treatments of Related Diseases",isOpenForSubmission:!1,hash:"e2d3335445d2852d0b906bb9750e939f",slug:"cerebral-circulation-updates-on-models-diagnostics-and-treatments-of-related-diseases",bookSignature:"Alba Scerrati, Luca Ricciardi and Flavia Dones",coverURL:"https://cdn.intechopen.com/books/images_new/11371.jpg",editors:[{id:"182614",title:"Dr.",name:"Alba",middleName:null,surname:"Scerrati",slug:"alba-scerrati",fullName:"Alba Scerrati"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11012",title:"Radiopharmaceuticals",subtitle:"Current Research for Better Diagnosis and Therapy",isOpenForSubmission:!1,hash:"f9046d6f96148b285e776f384991120d",slug:"radiopharmaceuticals-current-research-for-better-diagnosis-and-therapy",bookSignature:"Farid A. Badria",coverURL:"https://cdn.intechopen.com/books/images_new/11012.jpg",editors:[{id:"41865",title:"Prof.",name:"Farid A.",middleName:null,surname:"Badria",slug:"farid-a.-badria",fullName:"Farid A. Badria"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9974",title:"E-Learning and Digital Education in the Twenty-First Century",subtitle:null,isOpenForSubmission:!1,hash:"88b58d66e975df20425fc1dfd22d53aa",slug:"e-learning-and-digital-education-in-the-twenty-first-century",bookSignature:"M. Mahruf C. Shohel",coverURL:"https://cdn.intechopen.com/books/images_new/9974.jpg",editors:[{id:"94099",title:"Dr.",name:"M. Mahruf C.",middleName:null,surname:"Shohel",slug:"m.-mahruf-c.-shohel",fullName:"M. Mahruf C. Shohel"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:12,limit:12,total:4433},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"10858",title:"MOOC (Massive Open Online Courses)",subtitle:null,isOpenForSubmission:!1,hash:"d32f86793bc72dde32532f509b1ec5b0",slug:"mooc-massive-open-online-courses-",bookSignature:"Dragan Cvetković",coverURL:"https://cdn.intechopen.com/books/images_new/10858.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:1677,editors:[{id:"101330",title:"Dr.",name:"Dragan",middleName:"Mladen",surname:"Cvetković",slug:"dragan-cvetkovic",fullName:"Dragan Cvetković"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10195",title:"Serotonin and the CNS",subtitle:"New Developments in Pharmacology and Therapeutics",isOpenForSubmission:!1,hash:"7ed9d96da98233a885bd2869a8056c36",slug:"serotonin-and-the-cns-new-developments-in-pharmacology-and-therapeutics",bookSignature:"Berend Olivier",coverURL:"https://cdn.intechopen.com/books/images_new/10195.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:1337,editors:[{id:"71579",title:"Prof.",name:"Berend",middleName:null,surname:"Olivier",slug:"berend-olivier",fullName:"Berend Olivier"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10755",title:"Corporate Governance",subtitle:"Recent Advances and Perspectives",isOpenForSubmission:!1,hash:"ffe06d1d5c4bf0fc2e63511825fe1257",slug:"corporate-governance-recent-advances-and-perspectives",bookSignature:"Okechukwu Lawrence Emeagwali and Feyza Bhatti",coverURL:"https://cdn.intechopen.com/books/images_new/10755.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:1309,editors:[{id:"196317",title:"Associate Prof.",name:"Okechukwu Lawrence",middleName:null,surname:"Emeagwali",slug:"okechukwu-lawrence-emeagwali",fullName:"Okechukwu Lawrence Emeagwali"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11120",title:"Environmental Impact and Remediation of Heavy Metals",subtitle:null,isOpenForSubmission:!1,hash:"9e77514288e7394f1e6cd13481af3509",slug:"environmental-impact-and-remediation-of-heavy-metals",bookSignature:"Hosam M. Saleh and Amal I. Hassan",coverURL:"https://cdn.intechopen.com/books/images_new/11120.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:847,editors:[{id:"144691",title:"Prof.",name:"Hosam M.",middleName:null,surname:"Saleh",slug:"hosam-m.-saleh",fullName:"Hosam M. Saleh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10901",title:"Grapes and Wine",subtitle:null,isOpenForSubmission:!1,hash:"5d7f2aa74874444bc6986e613ccebd7c",slug:"grapes-and-wine",bookSignature:"Antonio Morata, Iris Loira and Carmen González",coverURL:"https://cdn.intechopen.com/books/images_new/10901.jpg",publishedDate:"June 15th 2022",numberOfDownloads:2273,editors:[{id:"180952",title:"Prof.",name:"Antonio",middleName:null,surname:"Morata",slug:"antonio-morata",fullName:"Antonio Morata"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11080",title:"Engineering Principles",subtitle:"Welding and Residual Stresses",isOpenForSubmission:!1,hash:"6c07a13a113bce94174b40096f30fb5e",slug:"engineering-principles-welding-and-residual-stresses",bookSignature:"Kavian Omar Cooke and Ronaldo Câmara Cozza",coverURL:"https://cdn.intechopen.com/books/images_new/11080.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:591,editors:[{id:"138778",title:"Dr.",name:"Kavian",middleName:"Omar",surname:"Cooke",slug:"kavian-cooke",fullName:"Kavian Cooke"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11332",title:"Essential Oils",subtitle:"Advances in Extractions and Biological Applications",isOpenForSubmission:!1,hash:"742e6cae3a35686f975edc8d7f9afa94",slug:"essential-oils-advances-in-extractions-and-biological-applications",bookSignature:"Mozaniel Santana de Oliveira and Eloisa Helena de Aguiar Andrade",coverURL:"https://cdn.intechopen.com/books/images_new/11332.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:515,editors:[{id:"195290",title:"Ph.D.",name:"Mozaniel",middleName:null,surname:"Santana De Oliveira",slug:"mozaniel-santana-de-oliveira",fullName:"Mozaniel Santana De Oliveira"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11029",title:"Hepatitis B",subtitle:null,isOpenForSubmission:!1,hash:"609701f502efc3538c112ff47a2c2119",slug:"hepatitis-b",bookSignature:"Luis Rodrigo",coverURL:"https://cdn.intechopen.com/books/images_new/11029.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:413,editors:[{id:"73208",title:"Prof.",name:"Luis",middleName:null,surname:"Rodrigo",slug:"luis-rodrigo",fullName:"Luis Rodrigo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9537",title:"Human Rights in the Contemporary World",subtitle:null,isOpenForSubmission:!1,hash:"54f05b93812fd434f3962956d6413a6b",slug:"human-rights-in-the-contemporary-world",bookSignature:"Trudy Corrigan",coverURL:"https://cdn.intechopen.com/books/images_new/9537.jpg",publishedDate:"June 8th 2022",numberOfDownloads:2194,editors:[{id:"197557",title:"Dr.",name:"Trudy",middleName:null,surname:"Corrigan",slug:"trudy-corrigan",fullName:"Trudy Corrigan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11371",title:"Cerebral Circulation",subtitle:"Updates on Models, Diagnostics and Treatments of Related Diseases",isOpenForSubmission:!1,hash:"e2d3335445d2852d0b906bb9750e939f",slug:"cerebral-circulation-updates-on-models-diagnostics-and-treatments-of-related-diseases",bookSignature:"Alba Scerrati, Luca Ricciardi and Flavia Dones",coverURL:"https://cdn.intechopen.com/books/images_new/11371.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:341,editors:[{id:"182614",title:"Dr.",name:"Alba",middleName:null,surname:"Scerrati",slug:"alba-scerrati",fullName:"Alba Scerrati"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"11043",title:"Endometriosis",subtitle:"Recent Advances, New Perspectives and Treatments",isOpenForSubmission:!1,hash:"7baf1c70b11d41400bb9302ae9411ca4",slug:"endometriosis-recent-advances-new-perspectives-and-treatments",bookSignature:"Giovana Ap. Gonçalves",coverURL:"https://cdn.intechopen.com/books/images_new/11043.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"185930",title:"Associate Prof.",name:"Giovana",middleName:null,surname:"Gonçalves",slug:"giovana-goncalves",fullName:"Giovana Gonçalves"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10536",title:"Campylobacter",subtitle:null,isOpenForSubmission:!1,hash:"c4b132b741dd0a2ed539b824ab63965f",slug:"campylobacter",bookSignature:"Guillermo Tellez-Isaias and Saeed El-Ashram",coverURL:"https://cdn.intechopen.com/books/images_new/10536.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"73465",title:"Dr.",name:"Guillermo",middleName:null,surname:"Téllez",slug:"guillermo-tellez",fullName:"Guillermo Téllez"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10798",title:"Starch",subtitle:"Evolution and Recent Advances",isOpenForSubmission:!1,hash:"f197f6062c1574a9a90e50a369271bcf",slug:"starch-evolution-and-recent-advances",bookSignature:"Martins Ochubiojo Emeje",coverURL:"https://cdn.intechopen.com/books/images_new/10798.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"94311",title:"Prof.",name:"Martins",middleName:"Ochubiojo",surname:"Ochubiojo Emeje",slug:"martins-ochubiojo-emeje",fullName:"Martins Ochubiojo Emeje"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11083",title:"Hazardous Waste Management",subtitle:null,isOpenForSubmission:!1,hash:"d553bd4f6f1c4b115ca69bd19faac7dc",slug:"hazardous-waste-management",bookSignature:"Rajesh Banu Jeyakumar, Kavitha Sankarapandian and Yukesh Kannah Ravi",coverURL:"https://cdn.intechopen.com/books/images_new/11083.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"218539",title:"Dr.",name:"Rajesh Banu",middleName:null,surname:"Jeyakumar",slug:"rajesh-banu-jeyakumar",fullName:"Rajesh Banu Jeyakumar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10848",title:"Tribology of Machine Elements",subtitle:"Fundamentals and Applications",isOpenForSubmission:!1,hash:"3c4ca4c4692ca8d4fa749b4ae81ec1fa",slug:"tribology-of-machine-elements-fundamentals-and-applications",bookSignature:"Giuseppe Pintaude, Tiago Cousseau and Anna Rudawska",coverURL:"https://cdn.intechopen.com/books/images_new/10848.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"18347",title:"Prof.",name:"Giuseppe",middleName:null,surname:"Pintaude",slug:"giuseppe-pintaude",fullName:"Giuseppe Pintaude"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10856",title:"Crude Oil",subtitle:"New Technologies and Recent Approaches",isOpenForSubmission:!1,hash:"8d0a7ca35b3de95b295dc4eab39a087e",slug:"crude-oil-new-technologies-and-recent-approaches",bookSignature:"Manar Elsayed Abdel-Raouf and Mohamed Hasan El-Keshawy",coverURL:"https://cdn.intechopen.com/books/images_new/10856.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"102626",title:"Prof.",name:"Manar",middleName:null,surname:"Elsayed Abdel-Raouf",slug:"manar-elsayed-abdel-raouf",fullName:"Manar Elsayed Abdel-Raouf"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9625",title:"Spinocerebellar Ataxia",subtitle:"Concepts, Particularities and Generalities",isOpenForSubmission:!1,hash:"365a7025fd46eb45de2549bdd9d50b98",slug:"spinocerebellar-ataxia-concepts-particularities-and-generalities",bookSignature:"Patricia Bozzetto Ambrosi",coverURL:"https://cdn.intechopen.com/books/images_new/9625.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"221787",title:"Dr.",name:"Patricia",middleName:null,surname:"Bozzetto Ambrosi",slug:"patricia-bozzetto-ambrosi",fullName:"Patricia Bozzetto Ambrosi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10905",title:"Plant Defense Mechanisms",subtitle:null,isOpenForSubmission:!1,hash:"84ad5b27dde5f01dc76087d0fd6fa834",slug:"plant-defense-mechanisms",bookSignature:"Josphert Ngui Kimatu",coverURL:"https://cdn.intechopen.com/books/images_new/10905.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"224171",title:"Prof.",name:"Josphert N.",middleName:null,surname:"Kimatu",slug:"josphert-n.-kimatu",fullName:"Josphert N. Kimatu"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10686",title:"Natural Gas",subtitle:"New Perspectives and Future Developments",isOpenForSubmission:!1,hash:"581763788a6a59e653a9d1d9b5a42d79",slug:"natural-gas-new-perspectives-and-future-developments",bookSignature:"Maryam Takht Ravanchi",coverURL:"https://cdn.intechopen.com/books/images_new/10686.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"2416",title:"Dr.",name:"Maryam",middleName:null,surname:"Takht Ravanchi",slug:"maryam-takht-ravanchi",fullName:"Maryam Takht Ravanchi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10988",title:"Railway Transport Planning and Manageme",subtitle:null,isOpenForSubmission:!1,hash:"5cb54cc53caedad9ec78372563c82e2c",slug:"railway-transport-planning-and-management",bookSignature:"Stefano de Luca, Roberta Di Pace and Chiara Fiori",coverURL:"https://cdn.intechopen.com/books/images_new/10988.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"271061",title:"Prof.",name:"Stefano",middleName:null,surname:"de Luca",slug:"stefano-de-luca",fullName:"Stefano de Luca"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"68",title:"Engineering Management",slug:"engineering-management",parent:{id:"7",title:"Business, Management and Economics",slug:"business-management-and-economics"},numberOfBooks:2,numberOfSeries:0,numberOfAuthorsAndEditors:27,numberOfWosCitations:16,numberOfCrossrefCitations:19,numberOfDimensionsCitations:36,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicId:"68",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"8603",title:"Green Practices and Strategies in Supply Chain Management",subtitle:null,isOpenForSubmission:!1,hash:"cfd8838aeddebe04b84b2fbc553b6887",slug:"green-practices-and-strategies-in-supply-chain-management",bookSignature:"Syed Abdul Rehman Khan",coverURL:"https://cdn.intechopen.com/books/images_new/8603.jpg",editedByType:"Edited by",editors:[{id:"254664",title:"Prof.",name:"Syed Abdul Rehman",middleName:null,surname:"Khan",slug:"syed-abdul-rehman-khan",fullName:"Syed Abdul Rehman Khan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5189",title:"Sustainable Supply Chain Management",subtitle:null,isOpenForSubmission:!1,hash:"bb451bb6037023b54ee65e9fd80e83c9",slug:"sustainable-supply-chain-management",bookSignature:"Evelin Krmac",coverURL:"https://cdn.intechopen.com/books/images_new/5189.jpg",editedByType:"Edited by",editors:[{id:"32772",title:"Dr.",name:"Evelin",middleName:null,surname:"Krmac",slug:"evelin-krmac",fullName:"Evelin Krmac"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:2,seriesByTopicCollection:[],seriesByTopicTotal:0,mostCitedChapters:[{id:"63678",doi:"10.5772/intechopen.81088",title:"Introductory Chapter: Introduction of Green Supply Chain Management",slug:"introductory-chapter-introduction-of-green-supply-chain-management",totalDownloads:4136,totalCrossrefCites:5,totalDimensionsCites:9,abstract:null,book:{id:"8603",slug:"green-practices-and-strategies-in-supply-chain-management",title:"Green Practices and Strategies in Supply Chain Management",fullTitle:"Green Practices and Strategies in Supply Chain Management"},signatures:"Syed Abdul Rehman Khan",authors:[{id:"254664",title:"Prof.",name:"Syed Abdul Rehman",middleName:null,surname:"Khan",slug:"syed-abdul-rehman-khan",fullName:"Syed Abdul Rehman Khan"}]},{id:"50220",doi:"10.5772/62533",title:"Identification of Environmental Criteria for Selecting a Logistics Service Provider: A Step Forward towards Green Supply Chain Management",slug:"identification-of-environmental-criteria-for-selecting-a-logistics-service-provider-a-step-forward-t",totalDownloads:2423,totalCrossrefCites:3,totalDimensionsCites:6,abstract:"Green environmental performance increases the competitiveness of the supply chain. However, the greening of the supply chain depends on the manufacturer who drives the green initiative, as well as on all the members of the supply chain who take part in the process. The manufacturer’s attention has been largely focused on the environmental performance of the supplier and retailer, whereas logistics service providers have been somehow neglected. It is, in fact, the case is that logistics service providers have begun to play a critical role in supply chain management and could therefore significantly improve environmental sustainability. They have already undertaken a green initiative that unfortunately has rarely, if at all, been required by the manufacturer. The lack of requirements for logistics providers hinders the progress of a green initiative. To take a step forward towards green supply chain management, this chapter aims to introduce all the necessary criteria for the selection of a logistics service provider (LP), with an emphasis on environmental criteria. The environmental selection criteria, with all related subcriteria, were achieved on the basis of a systematic literature review. It has been found that buyers of logistics services still strive to minimize costs, expect quality logistics services, a well-positioned LP, all the while overlooking environmental issues. The most frequently applied environmental selection criteria are value-added reverse logistics services, followed by environmental expenditures, pollutants released, energy consumption, clean materials and energy use. The findings presented here are useful particularly for researchers, as issues regarding sustainable LP selection and its limitations are highlighted, related to selection criteria identification. These findings may be of less use to managers. However, future phases of this study, richer for the evaluation of logistics experts, will be much more applicable to buyers and providers of logistics services.",book:{id:"5189",slug:"sustainable-supply-chain-management",title:"Sustainable Supply Chain Management",fullTitle:"Sustainable Supply Chain Management"},signatures:"Patricija Bajec and Danijela Tuljak-Suban",authors:[{id:"172904",title:"Dr.",name:"Patricija",middleName:null,surname:"Bajec",slug:"patricija-bajec",fullName:"Patricija Bajec"},{id:"172905",title:"Dr.",name:"Danijela",middleName:null,surname:"Tuljak-Suban",slug:"danijela-tuljak-suban",fullName:"Danijela Tuljak-Suban"}]},{id:"50995",doi:"10.5772/63377",title:"Environmental and Social Sustainability in the Fresh Fruit and Vegetables Supply Chain: A Competitiveness’ Asset",slug:"environmental-and-social-sustainability-in-the-fresh-fruit-and-vegetables-supply-chain-a-competitive",totalDownloads:2058,totalCrossrefCites:2,totalDimensionsCites:5,abstract:"The concern for products that meet the requirements of sustainability is a key factor that drives consumers and can be the engine of a successful economy in the food businesses. In the specific case of the fresh fruit and vegetables, more than ever, sustainability understood as a greater focus on the social and environmental performance of the product and of its supply chain, can be considered as a tool to counter the consumer's disaffection. The communication of the product's sustainability can indeed represent a tool to bring out the fruit and vegetable products from the anonymity, a strategy to will make it ‘remember', relying not only on the traditional values recognized to the segment, but also on a set of the supply chain attributes that can differentiate it. However, how to get effectively to the consumer by using a multidimensional and complex concept as the product's sustainability of the product, how to make the sustainability attribute a factor to be considered in the final purchasing choices, how to involve the different stakeholders in the building of a sustainable supply chain (regardless of its length) are still open discussion topics. After presenting the main sustainability certification and communication tools adopted till nowadays for the fresh fruit and vegetables supply chain, the chapter investigates the relative potentialities and criticisms in order to turn them into a real competitiveness’ asset.",book:{id:"5189",slug:"sustainable-supply-chain-management",title:"Sustainable Supply Chain Management",fullTitle:"Sustainable Supply Chain Management"},signatures:"Nadia Tecco, Nicole Giuggioli, Vincenzo Girgenti and Cristiana\nPeano",authors:[{id:"179865",title:"Ph.D.",name:"Nicole",middleName:null,surname:"Giuggioli",slug:"nicole-giuggioli",fullName:"Nicole Giuggioli"},{id:"179987",title:"Dr.",name:"Cristiana",middleName:null,surname:"Peano",slug:"cristiana-peano",fullName:"Cristiana Peano"},{id:"181109",title:"Ph.D.",name:"Nadia",middleName:null,surname:"Tecco",slug:"nadia-tecco",fullName:"Nadia Tecco"},{id:"181111",title:"Ph.D.",name:"Vincenzo",middleName:null,surname:"Girgenti",slug:"vincenzo-girgenti",fullName:"Vincenzo Girgenti"}]},{id:"50354",doi:"10.5772/62537",title:"Energy Chains Optimization for Selection of Sustainable Energy Supply",slug:"energy-chains-optimization-for-selection-of-sustainable-energy-supply",totalDownloads:2039,totalCrossrefCites:2,totalDimensionsCites:4,abstract:"The notion of energy chain concept has been defined as the trajectory of energy transformations from the fuel source or energy sources to useful energy form to end users. Production of fuels, heat and electricity from different sources is defined by the appropriate energy supply chain. Every single energy supply chain can be uniquely defined by several sustainability criteria. These criteria are: total energy efficiency of production, total exergy efficiency of overall chain, the coefficient of exergy quality for different products at energy chains, economy of production, investment and environmental criteria. Optimal energy supply chain can be chosen by using multicriteria optimization which fulfils the above-mentioned sustainability criteria. This selected energy chain is close to ideal solution. The ideal energy supply chain is formed from the set of energy production ways which are defined from the perspective of sustainability criteria and which have connection with the current status of technologies, economic, environmental parameters, etc. The concept of optimization in practice is usually based on economics until recently, often neglecting all the other consequences of such a decision. Therefore, multicriteria decision making (MCDM) improves the opportunities in assessing the optimal variant of energy chain for defined ranking criteria. Before the optimization process, it is necessary to create a mathematical model for calculation of optimization criteria. Also, for each specific case of energy production, it is necessary to develop appropriate mathematical formulas to describe the energy chain. Numerical verification, all mathematical calculations and modelling have been applied and confirmed on wood biomass supply chain for energy production in this case. The reason for this is complexity of supply chains in the bioenergy and representation of renewable energy sources. For total ranking of energy chain for production of fuel or energy and selection of optimum variant, the multicriteria optimization and VIKOR method were applied. The significance of energy production from renewable energy sources is particularly expressed nowadays. Basically, the most significant part in the process of energy production from energy sources is the supply chain, final conversion of energy in useful form at the energy plant and the distribution process to end users. Due to the fact that there are various opportunities for the composition of energy chains of fuel supply and different ways of energy production, it is necessary to try to make a unique mathematical approach for this problem. With the proposed sustainability criteria and developed mathematical model, it is possible to unify the overall problem of energy supply chains’ optimization. The proposed developed method can be used for the optimization of any kind of energy supply chains (electricity, heat, fuels or their mix). All of these are enabled by proper selection criteria for the description of overall energy transformations in energy chains and quality evaluation of the energy produced. The developed approach and mathematical model have a very practical application in the selection of optimal variant of energy production and of course in designing new energy chains.",book:{id:"5189",slug:"sustainable-supply-chain-management",title:"Sustainable Supply Chain Management",fullTitle:"Sustainable Supply Chain Management"},signatures:"Srđan Vasković, Petar Gvero, Vlado Medaković and Velid Halilović",authors:[{id:"141823",title:"Prof.",name:"Petar",middleName:null,surname:"Gvero",slug:"petar-gvero",fullName:"Petar Gvero"},{id:"180821",title:"Ph.D.",name:"Srdjan",middleName:null,surname:"Vaskovic",slug:"srdjan-vaskovic",fullName:"Srdjan Vaskovic"},{id:"180982",title:"Dr.",name:"Vlado",middleName:null,surname:"Medakovic",slug:"vlado-medakovic",fullName:"Vlado Medakovic"},{id:"180983",title:"Dr.",name:"Velid",middleName:null,surname:"Halilovic",slug:"velid-halilovic",fullName:"Velid Halilovic"}]},{id:"67357",doi:"10.5772/intechopen.82485",title:"Sustainable Supply Chain through Greater Customer Engagement",slug:"sustainable-supply-chain-through-greater-customer-engagement",totalDownloads:965,totalCrossrefCites:1,totalDimensionsCites:3,abstract:"Climate change has a worldwide impact, and organisations have the greatest responsibility to make a difference through sustainable development as they have the resources, knowledge and reach. Sustainable supply chain in organisations is the need of the hour for holistic development as supply chain involves host of activities including resource conversion and information sharing to add value to end customer. Sustainable supply chain as a concept has evolved due to customer needs/demands as one of the driving forces. Customer engagement needs inclusion in organisations and is relatively undervalued as a tool to drive continuous improvement in supply chains. This chapter will work to build a case of greater customer engagement in supply chain management through organisational communication, interactions, opinions and feedback of customers. The study develops a case of customer engagement for sustainable supply chain through a research using a semi-structured questionnaire involving in-depth interviews with founders and decision makers in two mid-tier Indian organisations in health care and in chemical sector in India. Sustainable supply chain through customer engagement aids improved customer/stakeholder retention or loyalty resulting to economic development, positive image building, innovation and better resource utilisation.",book:{id:"8603",slug:"green-practices-and-strategies-in-supply-chain-management",title:"Green Practices and Strategies in Supply Chain Management",fullTitle:"Green Practices and Strategies in Supply Chain Management"},signatures:"Amrinder Kaur and Rinku Bhardwaj",authors:null}],mostDownloadedChaptersLast30Days:[{id:"63678",title:"Introductory Chapter: Introduction of Green Supply Chain Management",slug:"introductory-chapter-introduction-of-green-supply-chain-management",totalDownloads:4130,totalCrossrefCites:5,totalDimensionsCites:9,abstract:null,book:{id:"8603",slug:"green-practices-and-strategies-in-supply-chain-management",title:"Green Practices and Strategies in Supply Chain Management",fullTitle:"Green Practices and Strategies in Supply Chain Management"},signatures:"Syed Abdul Rehman Khan",authors:[{id:"254664",title:"Prof.",name:"Syed Abdul Rehman",middleName:null,surname:"Khan",slug:"syed-abdul-rehman-khan",fullName:"Syed Abdul Rehman Khan"}]},{id:"67893",title:"Green Supply Chain Management: A Precursor to Green Purchasing",slug:"green-supply-chain-management-a-precursor-to-green-purchasing",totalDownloads:1965,totalCrossrefCites:2,totalDimensionsCites:3,abstract:"The chapter’s focus is on an enterprise collaboration with the members of the value chain and the use of technology to enhance integration. These factors are attributes of supply chain management (SCM). When emphasis is placed on lean and agile supply chains, closed-loop supply chains, reverse logistics, and the practice of just in time (JIT), the operation is transformed to green supply chain management (GSCM). JIT reduces outsourcing of resources, has controlled production and transportation, and uses distribution centers to expedite the distribution process. The utilization of the returned products in reverse logistics for reuse, recycle, and remanufacturing reduces dumping and environmental degradation. The returned materials become additional resource which is value-added to the enterprise. Ultimately, this is a cost saving and a contribution to the enterprise’s bottom line and sustainability.",book:{id:"8603",slug:"green-practices-and-strategies-in-supply-chain-management",title:"Green Practices and Strategies in Supply Chain Management",fullTitle:"Green Practices and Strategies in Supply Chain Management"},signatures:"Kenneth Mathu",authors:null},{id:"51110",title:"Performance Evaluation for the Sustainable Supply Chain Management",slug:"performance-evaluation-for-the-sustainable-supply-chain-management",totalDownloads:2992,totalCrossrefCites:1,totalDimensionsCites:2,abstract:"Supply chain SC activities transform natural resources, raw materials, and components into various finished products that are delivered to end customers. A high efficient SC would bring great benefits to an enterprise such as integrated resources, reduced logistics costs, improved logistics efficiency, and high quality of overall level of services. In contrast, an inefficient SC will bring additional transaction costs, information management costs, and resource waste, reduce the production capacity of all enterprises on the chain, and unsatisfactory customer relationships. So the evaluation of a SC is important for an enterprise to survive in a competitive market in a globalized business environment. Therefore, it is important to research the various methods, performance indicator systems, and technology for evaluating, monitoring, predicting, and optimizing the performance of a SC. A typical procedure of the performance evaluation (PE) of a SC is to use the established evaluation performance indicators, employ an analytical method, follow a given procedure, to carry out quantitatively or qualitatively comparative analysis to provide the objective and accurate evaluation of a SC performance in a selected operation period. Various research works have been carried out in proposing the performance indicator systems and methods for SC performance evaluations. But there are no widely accepted indicator systems that can be applied in practical SC performance evaluations due to the fact that the indicators in different systems have been defined without a common understanding of the meanings and the relationships between them, and they are nonlinear and very complicated.",book:{id:"5189",slug:"sustainable-supply-chain-management",title:"Sustainable Supply Chain Management",fullTitle:"Sustainable Supply Chain Management"},signatures:"Xuemei Fan and Shujun Zhang",authors:[{id:"180918",title:"Dr.",name:"Xuemei",middleName:null,surname:"Fan",slug:"xuemei-fan",fullName:"Xuemei Fan"},{id:"180955",title:"Prof.",name:"Shujun",middleName:null,surname:"Zhang",slug:"shujun-zhang",fullName:"Shujun Zhang"}]},{id:"50199",title:"Modeling Sustainable Supply Chain Management as a Complex Adaptive System: The Emergence of Cooperation",slug:"modeling-sustainable-supply-chain-management-as-a-complex-adaptive-system-the-emergence-of-cooperati",totalDownloads:2608,totalCrossrefCites:2,totalDimensionsCites:3,abstract:"The aim of this chapter is to characterize sustainable supply chain management as a complex adaptive system (CAS) and develop an evolutionary game theory-based model to understand how cooperation emerges from interactions among companies to adopt sustainable management practices. We consider two interacting populations 1 and 2, each one with heterogeneous companies belonging to the same supply chain. One population is expected to behave cooperatively in adopting sustainable management practices while the other is expected to behave uncooperatively. The mathematical model we propose is game-dynamical replicator equations for multiple populations in the prisoner´s dilemma (PD) game and we implement it using NetLogo software. The proportion of cooperative companies in each population that adopt sustainable management practices evolves positively over time as companies only imitate the adoption of sustainable management practices in their own population and in the populations of their partners when the benefit obtained by cooperating is maximum. The spatial patterns observed help us to clarify the preconditions for the emergence of cooperation among companies in managing material, information and capital flows in a sustainable way. Finally, our simulation results show that the sustainable management of supply chains needs to be studied as CASs, in order to take into account the social side of sustainability.",book:{id:"5189",slug:"sustainable-supply-chain-management",title:"Sustainable Supply Chain Management",fullTitle:"Sustainable Supply Chain Management"},signatures:"Aida Huerta Barrientos and Idalia Flores de la Mota",authors:[{id:"180108",title:"Prof.",name:"Aida",middleName:null,surname:"Huerta Barrientos",slug:"aida-huerta-barrientos",fullName:"Aida Huerta Barrientos"},{id:"185248",title:"Dr.",name:"Idalia",middleName:null,surname:"Flores De La Mota",slug:"idalia-flores-de-la-mota",fullName:"Idalia Flores De La Mota"}]},{id:"50354",title:"Energy Chains Optimization for Selection of Sustainable Energy Supply",slug:"energy-chains-optimization-for-selection-of-sustainable-energy-supply",totalDownloads:2034,totalCrossrefCites:2,totalDimensionsCites:4,abstract:"The notion of energy chain concept has been defined as the trajectory of energy transformations from the fuel source or energy sources to useful energy form to end users. Production of fuels, heat and electricity from different sources is defined by the appropriate energy supply chain. Every single energy supply chain can be uniquely defined by several sustainability criteria. These criteria are: total energy efficiency of production, total exergy efficiency of overall chain, the coefficient of exergy quality for different products at energy chains, economy of production, investment and environmental criteria. Optimal energy supply chain can be chosen by using multicriteria optimization which fulfils the above-mentioned sustainability criteria. This selected energy chain is close to ideal solution. The ideal energy supply chain is formed from the set of energy production ways which are defined from the perspective of sustainability criteria and which have connection with the current status of technologies, economic, environmental parameters, etc. The concept of optimization in practice is usually based on economics until recently, often neglecting all the other consequences of such a decision. Therefore, multicriteria decision making (MCDM) improves the opportunities in assessing the optimal variant of energy chain for defined ranking criteria. Before the optimization process, it is necessary to create a mathematical model for calculation of optimization criteria. Also, for each specific case of energy production, it is necessary to develop appropriate mathematical formulas to describe the energy chain. Numerical verification, all mathematical calculations and modelling have been applied and confirmed on wood biomass supply chain for energy production in this case. The reason for this is complexity of supply chains in the bioenergy and representation of renewable energy sources. For total ranking of energy chain for production of fuel or energy and selection of optimum variant, the multicriteria optimization and VIKOR method were applied. The significance of energy production from renewable energy sources is particularly expressed nowadays. Basically, the most significant part in the process of energy production from energy sources is the supply chain, final conversion of energy in useful form at the energy plant and the distribution process to end users. Due to the fact that there are various opportunities for the composition of energy chains of fuel supply and different ways of energy production, it is necessary to try to make a unique mathematical approach for this problem. With the proposed sustainability criteria and developed mathematical model, it is possible to unify the overall problem of energy supply chains’ optimization. The proposed developed method can be used for the optimization of any kind of energy supply chains (electricity, heat, fuels or their mix). All of these are enabled by proper selection criteria for the description of overall energy transformations in energy chains and quality evaluation of the energy produced. The developed approach and mathematical model have a very practical application in the selection of optimal variant of energy production and of course in designing new energy chains.",book:{id:"5189",slug:"sustainable-supply-chain-management",title:"Sustainable Supply Chain Management",fullTitle:"Sustainable Supply Chain Management"},signatures:"Srđan Vasković, Petar Gvero, Vlado Medaković and Velid Halilović",authors:[{id:"141823",title:"Prof.",name:"Petar",middleName:null,surname:"Gvero",slug:"petar-gvero",fullName:"Petar Gvero"},{id:"180821",title:"Ph.D.",name:"Srdjan",middleName:null,surname:"Vaskovic",slug:"srdjan-vaskovic",fullName:"Srdjan Vaskovic"},{id:"180982",title:"Dr.",name:"Vlado",middleName:null,surname:"Medakovic",slug:"vlado-medakovic",fullName:"Vlado Medakovic"},{id:"180983",title:"Dr.",name:"Velid",middleName:null,surname:"Halilovic",slug:"velid-halilovic",fullName:"Velid Halilovic"}]}],onlineFirstChaptersFilter:{topicId:"68",limit:6,offset:0},onlineFirstChaptersCollection:[],onlineFirstChaptersTotal:0},preDownload:{success:null,errors:{}},subscriptionForm:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[],offset:8,limit:8,total:0},allSeries:{pteSeriesList:[{id:"14",title:"Artificial Intelligence",numberOfPublishedBooks:9,numberOfPublishedChapters:90,numberOfOpenTopics:6,numberOfUpcomingTopics:0,issn:"2633-1403",doi:"10.5772/intechopen.79920",isOpenForSubmission:!0},{id:"7",title:"Biomedical Engineering",numberOfPublishedBooks:12,numberOfPublishedChapters:104,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2631-5343",doi:"10.5772/intechopen.71985",isOpenForSubmission:!0}],lsSeriesList:[{id:"11",title:"Biochemistry",numberOfPublishedBooks:32,numberOfPublishedChapters:320,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2632-0983",doi:"10.5772/intechopen.72877",isOpenForSubmission:!0},{id:"25",title:"Environmental Sciences",numberOfPublishedBooks:1,numberOfPublishedChapters:12,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2754-6713",doi:"10.5772/intechopen.100362",isOpenForSubmission:!0},{id:"10",title:"Physiology",numberOfPublishedBooks:11,numberOfPublishedChapters:141,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2631-8261",doi:"10.5772/intechopen.72796",isOpenForSubmission:!0}],hsSeriesList:[{id:"3",title:"Dentistry",numberOfPublishedBooks:8,numberOfPublishedChapters:133,numberOfOpenTopics:2,numberOfUpcomingTopics:0,issn:"2631-6218",doi:"10.5772/intechopen.71199",isOpenForSubmission:!0},{id:"6",title:"Infectious Diseases",numberOfPublishedBooks:13,numberOfPublishedChapters:113,numberOfOpenTopics:3,numberOfUpcomingTopics:1,issn:"2631-6188",doi:"10.5772/intechopen.71852",isOpenForSubmission:!0},{id:"13",title:"Veterinary Medicine and Science",numberOfPublishedBooks:11,numberOfPublishedChapters:107,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2632-0517",doi:"10.5772/intechopen.73681",isOpenForSubmission:!0}],sshSeriesList:[{id:"22",title:"Business, Management and Economics",numberOfPublishedBooks:1,numberOfPublishedChapters:19,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2753-894X",doi:"10.5772/intechopen.100359",isOpenForSubmission:!0},{id:"23",title:"Education and Human Development",numberOfPublishedBooks:0,numberOfPublishedChapters:5,numberOfOpenTopics:1,numberOfUpcomingTopics:1,issn:null,doi:"10.5772/intechopen.100360",isOpenForSubmission:!0},{id:"24",title:"Sustainable Development",numberOfPublishedBooks:0,numberOfPublishedChapters:16,numberOfOpenTopics:5,numberOfUpcomingTopics:0,issn:null,doi:"10.5772/intechopen.100361",isOpenForSubmission:!0}],testimonialsList:[{id:"13",text:"The collaboration with and support of the technical staff of IntechOpen is fantastic. The whole process of submitting an article and editing of the submitted article goes extremely smooth and fast, the number of reads and downloads of chapters is high, and the contributions are also frequently cited.",author:{id:"55578",name:"Antonio",surname:"Jurado-Navas",institutionString:null,profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRisIQAS/Profile_Picture_1626166543950",slug:"antonio-jurado-navas",institution:{id:"720",name:"University of Malaga",country:{id:null,name:"Spain"}}}},{id:"6",text:"It is great to work with the IntechOpen to produce a worthwhile collection of research that also becomes a great educational resource and guide for future research endeavors.",author:{id:"259298",name:"Edward",surname:"Narayan",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/259298/images/system/259298.jpeg",slug:"edward-narayan",institution:{id:"3",name:"University of Queensland",country:{id:null,name:"Australia"}}}}]},series:{item:{id:"6",title:"Infectious Diseases",doi:"10.5772/intechopen.71852",issn:"2631-6188",scope:"This series will provide a comprehensive overview of recent research trends in various Infectious Diseases (as per the most recent Baltimore classification). Topics will include general overviews of infections, immunopathology, diagnosis, treatment, epidemiology, etiology, and current clinical recommendations for managing infectious diseases. Ongoing issues, recent advances, and future diagnostic approaches and therapeutic strategies will also be discussed. This book series will focus on various aspects and properties of infectious diseases whose deep understanding is essential for safeguarding the human race from losing resources and economies due to pathogens.",coverUrl:"https://cdn.intechopen.com/series/covers/6.jpg",latestPublicationDate:"June 25th, 2022",hasOnlineFirst:!0,numberOfPublishedBooks:13,editor:{id:"131400",title:"Prof.",name:"Alfonso J.",middleName:null,surname:"Rodriguez-Morales",slug:"alfonso-j.-rodriguez-morales",fullName:"Alfonso J. Rodriguez-Morales",profilePictureURL:"https://mts.intechopen.com/storage/users/131400/images/system/131400.png",biography:"Dr. Rodriguez-Morales is an expert in tropical and emerging diseases, particularly zoonotic and vector-borne diseases (especially arboviral diseases). He is the president of the Travel Medicine Committee of the Pan-American Infectious Diseases Association (API), as well as the president of the Colombian Association of Infectious Diseases (ACIN). He is a member of the Committee on Tropical Medicine, Zoonoses, and Travel Medicine of ACIN. He is a vice-president of the Latin American Society for Travel Medicine (SLAMVI) and a Member of the Council of the International Society for Infectious Diseases (ISID). Since 2014, he has been recognized as a Senior Researcher, at the Ministry of Science of Colombia. He is a professor at the Faculty of Medicine of the Fundacion Universitaria Autonoma de las Americas, in Pereira, Risaralda, Colombia. He is an External Professor, Master in Research on Tropical Medicine and International Health, Universitat de Barcelona, Spain. He is also a professor at the Master in Clinical Epidemiology and Biostatistics, Universidad Científica del Sur, Lima, Peru. In 2021 he has been awarded the “Raul Isturiz Award” Medal of the API. Also, in 2021, he was awarded with the “Jose Felix Patiño” Asclepius Staff Medal of the Colombian Medical College, due to his scientific contributions to COVID-19 during the pandemic. He is currently the Editor in Chief of the journal Travel Medicine and Infectious Diseases. His Scopus H index is 47 (Google Scholar H index, 68).",institutionString:"Institución Universitaria Visión de las Américas, Colombia",institution:null},editorTwo:null,editorThree:null},subseries:{paginationCount:4,paginationItems:[{id:"3",title:"Bacterial Infectious Diseases",coverUrl:"https://cdn.intechopen.com/series_topics/covers/3.jpg",isOpenForSubmission:!1,editor:null,editorTwo:null,editorThree:null},{id:"4",title:"Fungal Infectious Diseases",coverUrl:"https://cdn.intechopen.com/series_topics/covers/4.jpg",isOpenForSubmission:!0,editor:{id:"174134",title:"Dr.",name:"Yuping",middleName:null,surname:"Ran",slug:"yuping-ran",fullName:"Yuping Ran",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bS9d6QAC/Profile_Picture_1630330675373",biography:"Dr. Yuping Ran, Professor, Department of Dermatology, West China Hospital, Sichuan University, Chengdu, China. Completed the Course Medical Mycology, the Centraalbureau voor Schimmelcultures (CBS), Fungal Biodiversity Centre, Netherlands (2006). International Union of Microbiological Societies (IUMS) Fellow, and International Emerging Infectious Diseases (IEID) Fellow, Centers for Diseases Control and Prevention (CDC), Atlanta, USA. Diploma of Dermatological Scientist, Japanese Society for Investigative Dermatology. Ph.D. of Juntendo University, Japan. Bachelor’s and Master’s degree, Medicine, West China University of Medical Sciences. Chair of Sichuan Medical Association Dermatology Committee. General Secretary of The 19th Annual Meeting of Chinese Society of Dermatology and the Asia Pacific Society for Medical Mycology (2013). In charge of the Annual Medical Mycology Course over 20-years authorized by National Continue Medical Education Committee of China. Member of the board of directors of the Asia-Pacific Society for Medical Mycology (APSMM). Associate editor of Mycopathologia. Vice-chief of the editorial board of Chinses Journal of Mycology, China. Board Member and Chair of Mycology Group of Chinese Society of Dermatology.",institutionString:null,institution:{name:"Sichuan University",institutionURL:null,country:{name:"China"}}},editorTwo:null,editorThree:null},{id:"5",title:"Parasitic Infectious Diseases",coverUrl:"https://cdn.intechopen.com/series_topics/covers/5.jpg",isOpenForSubmission:!0,editor:{id:"67907",title:"Dr.",name:"Amidou",middleName:null,surname:"Samie",slug:"amidou-samie",fullName:"Amidou Samie",profilePictureURL:"https://mts.intechopen.com/storage/users/67907/images/system/67907.jpg",biography:"Dr. Amidou Samie is an Associate Professor of Microbiology at the University of Venda, in South Africa, where he graduated for his PhD in May 2008. He joined the Department of Microbiology the same year and has been giving lectures on topics covering parasitology, immunology, molecular biology and industrial microbiology. He is currently a rated researcher by the National Research Foundation of South Africa at category C2. He has published widely in the field of infectious diseases and has overseen several MSc’s and PhDs. His research activities mostly cover topics on infectious diseases from epidemiology to control. His particular interest lies in the study of intestinal protozoan parasites and opportunistic infections among HIV patients as well as the potential impact of childhood diarrhoea on growth and child development. He also conducts research on water-borne diseases and water quality and is involved in the evaluation of point-of-use water treatment technologies using silver and copper nanoparticles in collaboration with the University of Virginia, USA. He also studies the use of medicinal plants for the control of infectious diseases as well as antimicrobial drug resistance.",institutionString:null,institution:{name:"University of Venda",institutionURL:null,country:{name:"South Africa"}}},editorTwo:null,editorThree:null},{id:"6",title:"Viral Infectious Diseases",coverUrl:"https://cdn.intechopen.com/series_topics/covers/6.jpg",isOpenForSubmission:!0,editor:{id:"158026",title:"Prof.",name:"Shailendra K.",middleName:null,surname:"Saxena",slug:"shailendra-k.-saxena",fullName:"Shailendra K. Saxena",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRET3QAO/Profile_Picture_2022-05-10T10:10:26.jpeg",biography:"Professor Dr. Shailendra K. Saxena is a vice dean and professor at King George's Medical University, Lucknow, India. His research interests involve understanding the molecular mechanisms of host defense during human viral infections and developing new predictive, preventive, and therapeutic strategies for them using Japanese encephalitis virus (JEV), HIV, and emerging viruses as a model via stem cell and cell culture technologies. His research work has been published in various high-impact factor journals (Science, PNAS, Nature Medicine) with a high number of citations. He has received many awards and honors in India and abroad including various Young Scientist Awards, BBSRC India Partnering Award, and Dr. JC Bose National Award of Department of Biotechnology, Min. of Science and Technology, Govt. of India. Dr. Saxena is a fellow of various international societies/academies including the Royal College of Pathologists, United Kingdom; Royal Society of Medicine, London; Royal Society of Biology, United Kingdom; Royal Society of Chemistry, London; and Academy of Translational Medicine Professionals, Austria. He was named a Global Leader in Science by The Scientist. He is also an international opinion leader/expert in vaccination for Japanese encephalitis by IPIC (UK).",institutionString:"King George's Medical University",institution:{name:"King George's Medical University",institutionURL:null,country:{name:"India"}}},editorTwo:null,editorThree:null}]},overviewPageOFChapters:{paginationCount:10,paginationItems:[{id:"82380",title:"Evolution of Parasitism and Pathogenic Adaptations in Certain Medically Important Fungi",doi:"10.5772/intechopen.105206",signatures:"Gokul Shankar Sabesan, Ranjit Singh AJA, Ranjith Mehenderkar and Basanta Kumar Mohanty",slug:"evolution-of-parasitism-and-pathogenic-adaptations-in-certain-medically-important-fungi",totalDownloads:6,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Fungal Infectious Diseases - Annual Volume 2022",coverURL:"https://cdn.intechopen.com/books/images_new/11400.jpg",subseries:{id:"4",title:"Fungal Infectious Diseases"}}},{id:"82367",title:"Spatial Variation and Factors Associated with Unsuppressed HIV Viral Load among Women in an HIV Hyperendemic Area of KwaZulu-Natal, South Africa",doi:"10.5772/intechopen.105547",signatures:"Adenike O. Soogun, Ayesha B.M. Kharsany, Temesgen Zewotir and Delia North",slug:"spatial-variation-and-factors-associated-with-unsuppressed-hiv-viral-load-among-women-in-an-hiv-hype",totalDownloads:12,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"HIV-AIDS - Updates, Perspectives and Applications",coverURL:"https://cdn.intechopen.com/books/images_new/11575.jpg",subseries:{id:"6",title:"Viral Infectious Diseases"}}},{id:"82193",title:"Enterococcal Infections: Recent Nomenclature and emerging trends",doi:"10.5772/intechopen.104792",signatures:"Kavita Raja",slug:"enterococcal-infections-recent-nomenclature-and-emerging-trends",totalDownloads:7,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Streptococcal Infections",coverURL:"https://cdn.intechopen.com/books/images_new/10828.jpg",subseries:{id:"3",title:"Bacterial Infectious Diseases"}}},{id:"82207",title:"Management Strategies in Perinatal HIV",doi:"10.5772/intechopen.105451",signatures:"Kayla Aleshire and Rima Bazzi",slug:"management-strategies-in-perinatal-hiv",totalDownloads:8,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"HIV-AIDS - Updates, Perspectives and Applications",coverURL:"https://cdn.intechopen.com/books/images_new/11575.jpg",subseries:{id:"6",title:"Viral Infectious Diseases"}}}]},overviewPagePublishedBooks:{paginationCount:13,paginationItems:[{type:"book",id:"6667",title:"Influenza",subtitle:"Therapeutics and Challenges",coverURL:"https://cdn.intechopen.com/books/images_new/6667.jpg",slug:"influenza-therapeutics-and-challenges",publishedDate:"September 19th 2018",editedByType:"Edited by",bookSignature:"Shailendra K. Saxena",hash:"105e347b2d5dbbe6b593aceffa051efa",volumeInSeries:1,fullTitle:"Influenza - Therapeutics and Challenges",editors:[{id:"158026",title:"Prof.",name:"Shailendra K.",middleName:null,surname:"Saxena",slug:"shailendra-k.-saxena",fullName:"Shailendra K. Saxena",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRET3QAO/Profile_Picture_2022-05-10T10:10:26.jpeg",biography:"Professor Dr. Shailendra K. Saxena is a vice dean and professor at King George's Medical University, Lucknow, India. His research interests involve understanding the molecular mechanisms of host defense during human viral infections and developing new predictive, preventive, and therapeutic strategies for them using Japanese encephalitis virus (JEV), HIV, and emerging viruses as a model via stem cell and cell culture technologies. His research work has been published in various high-impact factor journals (Science, PNAS, Nature Medicine) with a high number of citations. He has received many awards and honors in India and abroad including various Young Scientist Awards, BBSRC India Partnering Award, and Dr. JC Bose National Award of Department of Biotechnology, Min. of Science and Technology, Govt. of India. Dr. Saxena is a fellow of various international societies/academies including the Royal College of Pathologists, United Kingdom; Royal Society of Medicine, London; Royal Society of Biology, United Kingdom; Royal Society of Chemistry, London; and Academy of Translational Medicine Professionals, Austria. He was named a Global Leader in Science by The Scientist. He is also an international opinion leader/expert in vaccination for Japanese encephalitis by IPIC (UK).",institutionString:"King George's Medical University",institution:{name:"King George's Medical University",institutionURL:null,country:{name:"India"}}}]},{type:"book",id:"7064",title:"Current Perspectives in Human Papillomavirus",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7064.jpg",slug:"current-perspectives-in-human-papillomavirus",publishedDate:"May 2nd 2019",editedByType:"Edited by",bookSignature:"Shailendra K. Saxena",hash:"d92a4085627bab25ddc7942fbf44cf05",volumeInSeries:2,fullTitle:"Current Perspectives in Human Papillomavirus",editors:[{id:"158026",title:"Prof.",name:"Shailendra K.",middleName:null,surname:"Saxena",slug:"shailendra-k.-saxena",fullName:"Shailendra K. Saxena",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRET3QAO/Profile_Picture_2022-05-10T10:10:26.jpeg",biography:"Professor Dr. Shailendra K. Saxena is a vice dean and professor at King George's Medical University, Lucknow, India. His research interests involve understanding the molecular mechanisms of host defense during human viral infections and developing new predictive, preventive, and therapeutic strategies for them using Japanese encephalitis virus (JEV), HIV, and emerging viruses as a model via stem cell and cell culture technologies. His research work has been published in various high-impact factor journals (Science, PNAS, Nature Medicine) with a high number of citations. He has received many awards and honors in India and abroad including various Young Scientist Awards, BBSRC India Partnering Award, and Dr. JC Bose National Award of Department of Biotechnology, Min. of Science and Technology, Govt. of India. Dr. Saxena is a fellow of various international societies/academies including the Royal College of Pathologists, United Kingdom; Royal Society of Medicine, London; Royal Society of Biology, United Kingdom; Royal Society of Chemistry, London; and Academy of Translational Medicine Professionals, Austria. He was named a Global Leader in Science by The Scientist. He is also an international opinion leader/expert in vaccination for Japanese encephalitis by IPIC (UK).",institutionString:"King George's Medical University",institution:{name:"King George's Medical University",institutionURL:null,country:{name:"India"}}}]},{type:"book",id:"7123",title:"Current Topics in Neglected Tropical Diseases",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7123.jpg",slug:"current-topics-in-neglected-tropical-diseases",publishedDate:"December 4th 2019",editedByType:"Edited by",bookSignature:"Alfonso J. Rodriguez-Morales",hash:"61c627da05b2ace83056d11357bdf361",volumeInSeries:3,fullTitle:"Current Topics in Neglected Tropical Diseases",editors:[{id:"131400",title:"Prof.",name:"Alfonso J.",middleName:null,surname:"Rodriguez-Morales",slug:"alfonso-j.-rodriguez-morales",fullName:"Alfonso J. Rodriguez-Morales",profilePictureURL:"https://mts.intechopen.com/storage/users/131400/images/system/131400.png",biography:"Dr. Rodriguez-Morales is an expert in tropical and emerging diseases, particularly zoonotic and vector-borne diseases (especially arboviral diseases). He is the president of the Travel Medicine Committee of the Pan-American Infectious Diseases Association (API), as well as the president of the Colombian Association of Infectious Diseases (ACIN). He is a member of the Committee on Tropical Medicine, Zoonoses, and Travel Medicine of ACIN. He is a vice-president of the Latin American Society for Travel Medicine (SLAMVI) and a Member of the Council of the International Society for Infectious Diseases (ISID). Since 2014, he has been recognized as a Senior Researcher, at the Ministry of Science of Colombia. He is a professor at the Faculty of Medicine of the Fundacion Universitaria Autonoma de las Americas, in Pereira, Risaralda, Colombia. He is an External Professor, Master in Research on Tropical Medicine and International Health, Universitat de Barcelona, Spain. He is also a professor at the Master in Clinical Epidemiology and Biostatistics, Universidad Científica del Sur, Lima, Peru. In 2021 he has been awarded the “Raul Isturiz Award” Medal of the API. Also, in 2021, he was awarded with the “Jose Felix Patiño” Asclepius Staff Medal of the Colombian Medical College, due to his scientific contributions to COVID-19 during the pandemic. He is currently the Editor in Chief of the journal Travel Medicine and Infectious Diseases. His Scopus H index is 47 (Google Scholar H index, 68).",institutionString:"Institución Universitaria Visión de las Américas, Colombia",institution:null}]},{type:"book",id:"7839",title:"Malaria",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7839.jpg",slug:"malaria",publishedDate:"December 11th 2019",editedByType:"Edited by",bookSignature:"Fyson H. Kasenga",hash:"91cde4582ead884cb0f355a19b67cd56",volumeInSeries:4,fullTitle:"Malaria",editors:[{id:"86725",title:"Dr.",name:"Fyson",middleName:"Hanania",surname:"Kasenga",slug:"fyson-kasenga",fullName:"Fyson Kasenga",profilePictureURL:"https://mts.intechopen.com/storage/users/86725/images/system/86725.jpg",biography:"Dr. Kasenga is a graduate of Tumaini University, Kilimanjaro Christian Medical College, Moshi, Tanzania and Umeå University, Sweden. He obtained a Master’s degree in Public Health and PhD in Public Health and Epidemiology. He has a background in Clinical Medicine and has taken courses at higher diploma levels in public health from University of Transkei, Republic of South Africa, and African Medical and Research Foundation (AMREF) in Nairobi, Kenya. Dr. Kasenga worked in different places in and outside Malawi, and has held various positions, such as Licensed Medical Officer, HIV/AIDS Programme Officer, HIV/AIDS resource person in the International Department of Diakonhjemet College, Oslo, Norway. He also managed an Integrated HIV/AIDS Prevention programme for over 5 years. He is currently working as a Director for the Health Ministries Department of Malawi Union of the Seventh Day Adventist Church. Dr. Kasenga has published over 5 articles on HIV/AIDS issues focusing on Prevention of Mother to Child Transmission of HIV (PMTCT), including a book chapter on HIV testing counseling (currently in press). Dr. Kasenga is married to Grace and blessed with three children, a son and two daughters: Happy, Lettice and Sungani.",institutionString:"Malawi Adventist University",institution:{name:"Malawi Adventist University",institutionURL:null,country:{name:"Malawi"}}}]}]},openForSubmissionBooks:{paginationCount:3,paginationItems:[{id:"11446",title:"Industry 4.0 - Perspectives and Applications",coverURL:"https://cdn.intechopen.com/books/images_new/11446.jpg",hash:"be984f45b90c1003798661ef885d8a34",secondStepPassed:!0,currentStepOfPublishingProcess:3,submissionDeadline:"May 12th 2022",isOpenForSubmission:!0,editors:[{id:"303193",title:"Dr.",name:"Meisam",surname:"Gordan",slug:"meisam-gordan",fullName:"Meisam Gordan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{id:"11448",title:"Artificial Neural Networks - Recent Advances, New Perspectives and Applications",coverURL:"https://cdn.intechopen.com/books/images_new/11448.jpg",hash:"e57ff97a39cfc6fe68a1ac62b503dbe9",secondStepPassed:!0,currentStepOfPublishingProcess:3,submissionDeadline:"June 3rd 2022",isOpenForSubmission:!0,editors:[{id:"22866",title:"Dr.",name:"Chi Leung Patrick",surname:"Hui",slug:"chi-leung-patrick-hui",fullName:"Chi Leung Patrick Hui"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{id:"11447",title:"Swarm Intelligence - Recent Advances and Current Applications",coverURL:"https://cdn.intechopen.com/books/images_new/11447.jpg",hash:"f68e3c3430a74fc7a7eb97f6ea2bb42e",secondStepPassed:!1,currentStepOfPublishingProcess:2,submissionDeadline:"July 22nd 2022",isOpenForSubmission:!0,editors:[{id:"24555",title:"Dr.",name:"Marco Antonio",surname:"Aceves Fernandez",slug:"marco-antonio-aceves-fernandez",fullName:"Marco Antonio Aceves Fernandez"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null}]},onlineFirstChapters:{paginationCount:5,paginationItems:[{id:"82394",title:"Learning by Doing Active Social Learning",doi:"10.5772/intechopen.105523",signatures:"Anat Raviv",slug:"learning-by-doing-active-social-learning",totalDownloads:3,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Active Learning - Research and Practice",coverURL:"https://cdn.intechopen.com/books/images_new/11481.jpg",subseries:{id:"89",title:"Education"}}},{id:"82310",title:"Knowledge of Intergenerational Contact to Combat Ageism towards Older People",doi:"10.5772/intechopen.105592",signatures:"Alice Nga Lai Kwong",slug:"knowledge-of-intergenerational-contact-to-combat-ageism-towards-older-people",totalDownloads:8,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Social Aspects of Ageing - Selected Challenges, Analyses, and Solutions",coverURL:"https://cdn.intechopen.com/books/images_new/11479.jpg",subseries:{id:"90",title:"Human Development"}}},{id:"81993",title:"Emergent Chemistry: Using Visualizations to Develop Abstract Thinking and a Sense of Scale Within the Preschool Setting",doi:"10.5772/intechopen.105216",signatures:"Karina Adbo",slug:"emergent-chemistry-using-visualizations-to-develop-abstract-thinking-and-a-sense-of-scale-within-the",totalDownloads:5,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Active Learning - Research and Practice",coverURL:"https://cdn.intechopen.com/books/images_new/11481.jpg",subseries:{id:"89",title:"Education"}}},{id:"82252",title:"Early Childhood: Enriched Environments and Roles of Caring Adults",doi:"10.5772/intechopen.105157",signatures:"Analía Mignaton",slug:"early-childhood-enriched-environments-and-roles-of-caring-adults",totalDownloads:4,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Active Learning - Research and Practice",coverURL:"https://cdn.intechopen.com/books/images_new/11481.jpg",subseries:{id:"89",title:"Education"}}},{id:"81996",title:"Perspective Chapter: New Active Learning Models in Africa",doi:"10.5772/intechopen.105217",signatures:"Fred Awaah, Cosmas Lambini Kombat and Emmanuel Okyere Ekwam",slug:"perspective-chapter-new-active-learning-models-in-africa",totalDownloads:6,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Active Learning - Research and Practice",coverURL:"https://cdn.intechopen.com/books/images_new/11481.jpg",subseries:{id:"89",title:"Education"}}}]},subseriesFiltersForOFChapters:[{caption:"Human Development",value:90,count:1,group:"subseries"},{caption:"Education",value:89,count:4,group:"subseries"}],publishedBooks:{paginationCount:8,paginationItems:[{type:"book",id:"9493",title:"Periodontology",subtitle:"Fundamentals and Clinical Features",coverURL:"https://cdn.intechopen.com/books/images_new/9493.jpg",slug:"periodontology-fundamentals-and-clinical-features",publishedDate:"February 16th 2022",editedByType:"Edited by",bookSignature:"Petra Surlin",hash:"dfe986c764d6c82ae820c2df5843a866",volumeInSeries:8,fullTitle:"Periodontology - Fundamentals and Clinical Features",editors:[{id:"171921",title:"Prof.",name:"Petra",middleName:null,surname:"Surlin",slug:"petra-surlin",fullName:"Petra Surlin",profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",institutionString:"University of Medicine and Pharmacy of Craiova",institution:{name:"University of Medicine and Pharmacy of Craiova",institutionURL:null,country:{name:"Romania"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"9588",title:"Clinical Concepts and Practical Management Techniques in Dentistry",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/9588.jpg",slug:"clinical-concepts-and-practical-management-techniques-in-dentistry",publishedDate:"February 9th 2022",editedByType:"Edited by",bookSignature:"Aneesa Moolla",hash:"42deab8d3bcf3edf64d1d9028d42efd1",volumeInSeries:7,fullTitle:"Clinical Concepts and Practical Management Techniques in Dentistry",editors:[{id:"318170",title:"Dr.",name:"Aneesa",middleName:null,surname:"Moolla",slug:"aneesa-moolla",fullName:"Aneesa Moolla",profilePictureURL:"https://mts.intechopen.com/storage/users/318170/images/system/318170.png",institutionString:"University of the Witwatersrand",institution:{name:"University of the Witwatersrand",institutionURL:null,country:{name:"South Africa"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"8202",title:"Periodontal Disease",subtitle:"Diagnostic and Adjunctive Non-surgical Considerations",coverURL:"https://cdn.intechopen.com/books/images_new/8202.jpg",slug:"periodontal-disease-diagnostic-and-adjunctive-non-surgical-considerations",publishedDate:"February 5th 2020",editedByType:"Edited by",bookSignature:"Nermin Mohammed Ahmed Yussif",hash:"0aee9799da7db2c732be44dd8fed16d8",volumeInSeries:6,fullTitle:"Periodontal Disease - Diagnostic and Adjunctive Non-surgical Considerations",editors:[{id:"210472",title:"Dr.",name:"Nermin",middleName:"Mohammed Ahmed",surname:"Yussif",slug:"nermin-yussif",fullName:"Nermin Yussif",profilePictureURL:"https://mts.intechopen.com/storage/users/210472/images/system/210472.jpg",institutionString:"MSA University",institution:null}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"8837",title:"Human Teeth",subtitle:"Key Skills and Clinical Illustrations",coverURL:"https://cdn.intechopen.com/books/images_new/8837.jpg",slug:"human-teeth-key-skills-and-clinical-illustrations",publishedDate:"January 22nd 2020",editedByType:"Edited by",bookSignature:"Zühre Akarslan and Farid Bourzgui",hash:"ac055c5801032970123e0a196c2e1d32",volumeInSeries:5,fullTitle:"Human Teeth - Key Skills and Clinical Illustrations",editors:[{id:"171887",title:"Prof.",name:"Zühre",middleName:null,surname:"Akarslan",slug:"zuhre-akarslan",fullName:"Zühre Akarslan",profilePictureURL:"https://mts.intechopen.com/storage/users/171887/images/system/171887.jpg",institutionString:"Gazi University",institution:{name:"Gazi University",institutionURL:null,country:{name:"Turkey"}}}],equalEditorOne:{id:"52177",title:"Prof.",name:"Farid",middleName:null,surname:"Bourzgui",slug:"farid-bourzgui",fullName:"Farid Bourzgui",profilePictureURL:"https://mts.intechopen.com/storage/users/52177/images/system/52177.png",biography:"Prof. Farid Bourzgui obtained his DMD and his DNSO option in Orthodontics at the School of Dental Medicine, Casablanca Hassan II University, Morocco, in 1995 and 2000, respectively. Currently, he is a professor of Orthodontics. He holds a Certificate of Advanced Study type A in Technology of Biomaterials used in Dentistry (1995); Certificate of Advanced Study type B in Dento-Facial Orthopaedics (1997) from the Faculty of Dental Surgery, University Denis Diderot-Paris VII, France; Diploma of Advanced Study (DESA) in Biocompatibility of Biomaterials from the Faculty of Medicine and Pharmacy of Casablanca (2002); Certificate of Clinical Occlusodontics from the Faculty of Dentistry of Casablanca (2004); University Diploma of Biostatistics and Perceptual Health Measurement from the Faculty of Medicine and Pharmacy of Casablanca (2011); and a University Diploma of Pedagogy of Odontological Sciences from the Faculty of Dentistry of Casablanca (2013). He is the author of several scientific articles, book chapters, and books.",institutionString:"University of Hassan II Casablanca",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"7",totalChapterViews:"0",totalEditedBooks:"2",institution:{name:"University of Hassan II Casablanca",institutionURL:null,country:{name:"Morocco"}}},equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"7060",title:"Gingival Disease",subtitle:"A Professional Approach for Treatment and Prevention",coverURL:"https://cdn.intechopen.com/books/images_new/7060.jpg",slug:"gingival-disease-a-professional-approach-for-treatment-and-prevention",publishedDate:"October 23rd 2019",editedByType:"Edited by",bookSignature:"Alaa Eddin Omar Al Ostwani",hash:"b81d39988cba3a3cf746c1616912cf41",volumeInSeries:4,fullTitle:"Gingival Disease - A Professional Approach for Treatment and Prevention",editors:[{id:"240870",title:"Ph.D.",name:"Alaa Eddin Omar",middleName:null,surname:"Al Ostwani",slug:"alaa-eddin-omar-al-ostwani",fullName:"Alaa Eddin Omar Al Ostwani",profilePictureURL:"https://mts.intechopen.com/storage/users/240870/images/system/240870.jpeg",institutionString:"International University for Science and Technology.",institution:{name:"Islamic University of Science and Technology",institutionURL:null,country:{name:"India"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"7572",title:"Trauma in Dentistry",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7572.jpg",slug:"trauma-in-dentistry",publishedDate:"July 3rd 2019",editedByType:"Edited by",bookSignature:"Serdar Gözler",hash:"7cb94732cfb315f8d1e70ebf500eb8a9",volumeInSeries:3,fullTitle:"Trauma in Dentistry",editors:[{id:"204606",title:"Dr.",name:"Serdar",middleName:null,surname:"Gözler",slug:"serdar-gozler",fullName:"Serdar Gözler",profilePictureURL:"https://mts.intechopen.com/storage/users/204606/images/system/204606.jpeg",institutionString:"Istanbul Aydin University",institution:{name:"Istanbul Aydın University",institutionURL:null,country:{name:"Turkey"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"7139",title:"Current Approaches in Orthodontics",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7139.jpg",slug:"current-approaches-in-orthodontics",publishedDate:"April 10th 2019",editedByType:"Edited by",bookSignature:"Belma Işık Aslan and Fatma Deniz Uzuner",hash:"2c77384eeb748cf05a898d65b9dcb48a",volumeInSeries:2,fullTitle:"Current Approaches in Orthodontics",editors:[{id:"42847",title:"Dr.",name:"Belma",middleName:null,surname:"Işik Aslan",slug:"belma-isik-aslan",fullName:"Belma Işik Aslan",profilePictureURL:"https://mts.intechopen.com/storage/users/42847/images/system/42847.jpg",institutionString:"Gazi University Dentistry Faculty Department of Orthodontics",institution:null}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"6668",title:"Dental Caries",subtitle:"Diagnosis, Prevention and Management",coverURL:"https://cdn.intechopen.com/books/images_new/6668.jpg",slug:"dental-caries-diagnosis-prevention-and-management",publishedDate:"September 19th 2018",editedByType:"Edited by",bookSignature:"Zühre Akarslan",hash:"b0f7667770a391f772726c3013c1b9ba",volumeInSeries:1,fullTitle:"Dental Caries - Diagnosis, Prevention and Management",editors:[{id:"171887",title:"Prof.",name:"Zühre",middleName:null,surname:"Akarslan",slug:"zuhre-akarslan",fullName:"Zühre Akarslan",profilePictureURL:"https://mts.intechopen.com/storage/users/171887/images/system/171887.jpg",institutionString:"Gazi University",institution:{name:"Gazi University",institutionURL:null,country:{name:"Turkey"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null}]},subseriesFiltersForPublishedBooks:[{group:"subseries",caption:"Prosthodontics and Implant Dentistry",value:2,count:2},{group:"subseries",caption:"Oral Health",value:1,count:6}],publicationYearFilters:[{group:"publicationYear",caption:"2022",value:2022,count:2},{group:"publicationYear",caption:"2020",value:2020,count:2},{group:"publicationYear",caption:"2019",value:2019,count:3},{group:"publicationYear",caption:"2018",value:2018,count:1}],authors:{paginationCount:229,paginationItems:[{id:"318170",title:"Dr.",name:"Aneesa",middleName:null,surname:"Moolla",slug:"aneesa-moolla",fullName:"Aneesa Moolla",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/318170/images/system/318170.png",biography:"Dr. Aneesa Moolla has extensive experience in the diverse fields of health care having previously worked in dental private practice, at the Red Cross Flying Doctors association, and in healthcare corporate settings. She is now a lecturer at the University of Witwatersrand, South Africa, and a principal researcher at the Health Economics and Epidemiology Research Office (HE2RO), South Africa. Dr. Moolla holds a Ph.D. in Psychology with her research being focused on mental health and resilience. In her professional work capacity, her research has further expanded into the fields of early childhood development, mental health, the HIV and TB care cascades, as well as COVID. She is also a UNESCO-trained International Bioethics Facilitator.",institutionString:"University of the Witwatersrand",institution:{name:"University of the Witwatersrand",country:{name:"South Africa"}}},{id:"419588",title:"Ph.D.",name:"Sergio",middleName:"Alexandre",surname:"Gehrke",slug:"sergio-gehrke",fullName:"Sergio Gehrke",position:null,profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y000038WgMKQA0/Profile_Picture_2022-06-02T11:44:20.jpg",biography:"Dr. Sergio Alexandre Gehrke is a doctorate holder in two fields. The first is a Ph.D. in Cellular and Molecular Biology from the Pontificia Catholic University, Porto Alegre, Brazil, in 2010 and the other is an International Ph.D. in Bioengineering from the Universidad Miguel Hernandez, Elche/Alicante, Spain, obtained in 2020. In 2018, he completed a postdoctoral fellowship in Materials Engineering in the NUCLEMAT of the Pontificia Catholic University, Porto Alegre, Brazil. He is currently the Director of the Postgraduate Program in Implantology of the Bioface/UCAM/PgO (Montevideo, Uruguay), Director of the Cathedra of Biotechnology of the Catholic University of Murcia (Murcia, Spain), an Extraordinary Full Professor of the Catholic University of Murcia (Murcia, Spain) as well as the Director of the private center of research Biotecnos – Technology and Science (Montevideo, Uruguay). Applied biomaterials, cellular and molecular biology, and dental implants are among his research interests. He has published several original papers in renowned journals. In addition, he is also a Collaborating Professor in several Postgraduate programs at different universities all over the world.",institutionString:null,institution:{name:"Universidad Católica San Antonio de Murcia",country:{name:"Spain"}}},{id:"342152",title:"Dr.",name:"Santo",middleName:null,surname:"Grace Umesh",slug:"santo-grace-umesh",fullName:"Santo Grace Umesh",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/342152/images/16311_n.jpg",biography:null,institutionString:null,institution:{name:"SRM Dental College",country:{name:"India"}}},{id:"333647",title:"Dr.",name:"Shreya",middleName:null,surname:"Kishore",slug:"shreya-kishore",fullName:"Shreya Kishore",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/333647/images/14701_n.jpg",biography:"Dr. Shreya Kishore completed her Bachelor in Dental Surgery in Chettinad Dental College and Research Institute, Chennai, and her Master of Dental Surgery (Orthodontics) in Saveetha Dental College, Chennai. She is also Invisalign certified. She’s working as a Senior Lecturer in the Department of Orthodontics, SRM Dental College since November 2019. She is actively involved in teaching orthodontics to the undergraduates and the postgraduates. Her clinical research topics include new orthodontic brackets, fixed appliances and TADs. She’s published 4 articles in well renowned indexed journals and has a published patency of her own. Her private practice is currently limited to orthodontics and works as a consultant in various clinics.",institutionString:null,institution:{name:"SRM Dental College",country:{name:"India"}}},{id:"323731",title:"Prof.",name:"Deepak M.",middleName:"Macchindra",surname:"Vikhe",slug:"deepak-m.-vikhe",fullName:"Deepak M. Vikhe",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/323731/images/13613_n.jpg",biography:"Dr Deepak M.Vikhe .\n\n\t\n\tDr Deepak M.Vikhe , completed his Masters & PhD in Prosthodontics from Rural Dental College, Loni securing third rank in the Pravara Institute of Medical Sciences Deemed University. He was awarded Dr.G.C.DAS Memorial Award for Research on Implants at 39th IPS conference Dubai (U A E).He has two patents under his name. He has received Dr.Saraswati medal award for best research for implant study in 2017.He has received Fully funded scholarship to Spain ,university of Santiago de Compostela. He has completed fellowship in Implantlogy from Noble Biocare. \nHe has attended various conferences and CDE programmes and has national publications to his credit. His field of interest is in Implant supported prosthesis. Presently he is working as a associate professor in the Dept of Prosthodontics, Rural Dental College, Loni and maintains a successful private practice specialising in Implantology at Rahata.\n\nEmail: drdeepak_mvikhe@yahoo.com..................",institutionString:null,institution:{name:"Pravara Institute of Medical Sciences",country:{name:"India"}}},{id:"204110",title:"Dr.",name:"Ahmed A.",middleName:null,surname:"Madfa",slug:"ahmed-a.-madfa",fullName:"Ahmed A. Madfa",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/204110/images/system/204110.jpg",biography:"Dr. Madfa is currently Associate Professor of Endodontics at Thamar University and a visiting lecturer at Sana'a University and University of Sciences and Technology. He has more than 6 years of experience in teaching. His research interests include root canal morphology, functionally graded concept, dental biomaterials, epidemiology and dental education, biomimetic restoration, finite element analysis and endodontic regeneration. Dr. Madfa has numerous international publications, full articles, two patents, a book and a book chapter. Furthermore, he won 14 international scientific awards. Furthermore, he is involved in many academic activities ranging from editorial board member, reviewer for many international journals and postgraduate students' supervisor. Besides, I deliver many courses and training workshops at various scientific events. Dr. Madfa also regularly attends international conferences and holds administrative positions (Deputy Dean of the Faculty for Students’ & Academic Affairs and Deputy Head of Research Unit).",institutionString:"Thamar University",institution:null},{id:"210472",title:"Dr.",name:"Nermin",middleName:"Mohammed Ahmed",surname:"Yussif",slug:"nermin-yussif",fullName:"Nermin Yussif",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/210472/images/system/210472.jpg",biography:"Dr. Nermin Mohammed Ahmed Yussif is working at the Faculty of dentistry, University for October university for modern sciences and arts (MSA). Her areas of expertise include: periodontology, dental laserology, oral implantology, periodontal plastic surgeries, oral mesotherapy, nutrition, dental pharmacology. She is an editor and reviewer in numerous international journals.",institutionString:"MSA University",institution:null},{id:"204606",title:"Dr.",name:"Serdar",middleName:null,surname:"Gözler",slug:"serdar-gozler",fullName:"Serdar Gözler",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/204606/images/system/204606.jpeg",biography:"Dr. Serdar Gözler has completed his undergraduate studies at the Marmara University Faculty of Dentistry in 1978, followed by an assistantship in the Prosthesis Department of Dicle University Faculty of Dentistry. Starting his PhD work on non-resilient overdentures with Assoc. Prof. Hüsnü Yavuzyılmaz, he continued his studies with Prof. Dr. Gürbüz Öztürk of Istanbul University Faculty of Dentistry Department of Prosthodontics, this time on Gnatology. He attended training programs on occlusion, neurology, neurophysiology, EMG, radiology and biostatistics. In 1982, he presented his PhD thesis \\Gerber and Lauritzen Occlusion Analysis Techniques: Diagnosis Values,\\ at Istanbul University School of Dentistry, Department of Prosthodontics. As he was also working with Prof. Senih Çalıkkocaoğlu on The Physiology of Chewing at the same time, Gözler has written a chapter in Çalıkkocaoğlu\\'s book \\Complete Prostheses\\ entitled \\The Place of Neuromuscular Mechanism in Prosthetic Dentistry.\\ The book was published five times since by the Istanbul University Publications. Having presented in various conferences about occlusion analysis until 1998, Dr. Gözler has also decided to use the T-Scan II occlusion analysis method. Having been personally trained by Dr. Robert Kerstein on this method, Dr. Gözler has been lecturing on the T-Scan Occlusion Analysis Method in conferences both in Turkey and abroad. Dr. Gözler has various articles and presentations on Digital Occlusion Analysis methods. He is now Head of the TMD Clinic at Prosthodontic Department of Faculty of Dentistry , Istanbul Aydın University , Turkey.",institutionString:"Istanbul Aydin University",institution:{name:"Istanbul Aydın University",country:{name:"Turkey"}}},{id:"240870",title:"Ph.D.",name:"Alaa Eddin Omar",middleName:null,surname:"Al Ostwani",slug:"alaa-eddin-omar-al-ostwani",fullName:"Alaa Eddin Omar Al Ostwani",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/240870/images/system/240870.jpeg",biography:"Dr. Al Ostwani Alaa Eddin Omar received his Master in dentistry from Damascus University in 2010, and his Ph.D. in Pediatric Dentistry from Damascus University in 2014. Dr. Al Ostwani is an assistant professor and faculty member at IUST University since 2014. \nDuring his academic experience, he has received several awards including the scientific research award from the Union of Arab Universities, the Syrian gold medal and the international gold medal for invention and creativity. Dr. Al Ostwani is a Member of the International Association of Dental Traumatology and the Syrian Society for Research and Preventive Dentistry since 2017. He is also a Member of the Reviewer Board of International Journal of Dental Medicine (IJDM), and the Indian Journal of Conservative and Endodontics since 2016.",institutionString:"International University for Science and Technology.",institution:{name:"Islamic University of Science and Technology",country:{name:"India"}}},{id:"42847",title:"Dr.",name:"Belma",middleName:null,surname:"Işik Aslan",slug:"belma-isik-aslan",fullName:"Belma Işik Aslan",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/42847/images/system/42847.jpg",biography:"Dr. Belma IşIk Aslan was born in 1976 in Ankara-TURKEY. After graduating from TED Ankara College in 1994, she attended to Gazi University, Faculty of Dentistry in Ankara. She completed her PhD in orthodontic education at Gazi University between 1999-2005. Dr. Işık Aslan stayed at the Providence Hospital Craniofacial Institude and Reconstructive Surgery in Michigan, USA for three months as an observer. She worked as a specialist doctor at Gazi University, Dentistry Faculty, Department of Orthodontics between 2005-2014. She was appointed as associate professor in January, 2014 and as professor in 2021. Dr. Işık Aslan still works as an instructor at the same faculty. She has published a total of 35 articles, 10 book chapters, 39 conference proceedings both internationally and nationally. Also she was the academic editor of the international book 'Current Advances in Orthodontics'. She is a member of the Turkish Orthodontic Society and Turkish Cleft Lip and Palate Society. She is married and has 2 children. Her knowledge of English is at an advanced level.",institutionString:"Gazi University Dentistry Faculty Department of Orthodontics",institution:null},{id:"178412",title:"Associate Prof.",name:"Guhan",middleName:null,surname:"Dergin",slug:"guhan-dergin",fullName:"Guhan Dergin",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/178412/images/6954_n.jpg",biography:"Assoc. Prof. Dr. Gühan Dergin was born in 1973 in Izmit. He graduated from Marmara University Faculty of Dentistry in 1999. He completed his specialty of OMFS surgery in Marmara University Faculty of Dentistry and obtained his PhD degree in 2006. In 2005, he was invited as a visiting doctor in the Oral and Maxillofacial Surgery Department of the University of North Carolina, USA, where he went on a scholarship. Dr. Dergin still continues his academic career as an associate professor in Marmara University Faculty of Dentistry. He has many articles in international and national scientific journals and chapters in books.",institutionString:null,institution:{name:"Marmara University",country:{name:"Turkey"}}},{id:"178414",title:"Prof.",name:"Yusuf",middleName:null,surname:"Emes",slug:"yusuf-emes",fullName:"Yusuf Emes",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/178414/images/6953_n.jpg",biography:"Born in Istanbul in 1974, Dr. Emes graduated from Istanbul University Faculty of Dentistry in 1997 and completed his PhD degree in Istanbul University faculty of Dentistry Department of Oral and Maxillofacial Surgery in 2005. He has papers published in international and national scientific journals, including research articles on implantology, oroantral fistulas, odontogenic cysts, and temporomandibular disorders. Dr. Emes is currently working as a full-time academic staff in Istanbul University faculty of Dentistry Department of Oral and Maxillofacial Surgery.",institutionString:null,institution:{name:"Istanbul University",country:{name:"Turkey"}}},{id:"192229",title:"Ph.D.",name:"Ana Luiza",middleName:null,surname:"De Carvalho Felippini",slug:"ana-luiza-de-carvalho-felippini",fullName:"Ana Luiza De Carvalho Felippini",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/192229/images/system/192229.jpg",biography:null,institutionString:"University of São Paulo",institution:{name:"University of Sao Paulo",country:{name:"Brazil"}}},{id:"256851",title:"Prof.",name:"Ayşe",middleName:null,surname:"Gülşen",slug:"ayse-gulsen",fullName:"Ayşe Gülşen",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/256851/images/9696_n.jpg",biography:"Dr. Ayşe Gülşen graduated in 1990 from Faculty of Dentistry, University of Ankara and did a postgraduate program at University of Gazi. \nShe worked as an observer and research assistant in Craniofacial Surgery Departments in New York, Providence Hospital in Michigan and Chang Gung Memorial Hospital in Taiwan. \nShe works as Craniofacial Orthodontist in Department of Aesthetic, Plastic and Reconstructive Surgery, Faculty of Medicine, University of Gazi, Ankara Turkey since 2004.",institutionString:"Univeristy of Gazi",institution:null},{id:"255366",title:"Prof.",name:"Tosun",middleName:null,surname:"Tosun",slug:"tosun-tosun",fullName:"Tosun Tosun",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/255366/images/7347_n.jpg",biography:"Graduated at the Faculty of Dentistry, University of Istanbul, Turkey in 1989;\nVisitor Assistant at the University of Padua, Italy and Branemark Osseointegration Center of Treviso, Italy between 1993-94;\nPhD thesis on oral implantology in University of Istanbul and was awarded the academic title “Dr.med.dent.”, 1997;\nHe was awarded the academic title “Doç.Dr.” (Associated Professor) in 2003;\nProficiency in Botulinum Toxin Applications, Reading-UK in 2009;\nMastership, RWTH Certificate in Laser Therapy in Dentistry, AALZ-Aachen University, Germany 2009-11;\nMaster of Science (MSc) in Laser Dentistry, University of Genoa, Italy 2013-14.\n\nDr.Tosun worked as Research Assistant in the Department of Oral Implantology, Faculty of Dentistry, University of Istanbul between 1990-2002. \nHe worked part-time as Consultant surgeon in Harvard Medical International Hospitals and John Hopkins Medicine, Istanbul between years 2007-09.\u2028He was contract Professor in the Department of Surgical and Diagnostic Sciences (DI.S.C.), Medical School, University of Genova, Italy between years 2011-16. \nSince 2015 he is visiting Professor at Medical School, University of Plovdiv, Bulgaria. \nCurrently he is Associated Prof.Dr. at the Dental School, Oral Surgery Dept., Istanbul Aydin University and since 2003 he works in his own private clinic in Istanbul, Turkey.\u2028\nDr.Tosun is reviewer in journal ‘Laser in Medical Sciences’, reviewer in journal ‘Folia Medica\\', a Fellow of the International Team for Implantology, Clinical Lecturer of DGZI German Association of Oral Implantology, Expert Lecturer of Laser&Health Academy, Country Representative of World Federation for Laser Dentistry, member of European Federation of Periodontology, member of Academy of Laser Dentistry. Dr.Tosun presents papers in international and national congresses and has scientific publications in international and national journals. He speaks english, spanish, italian and french.",institutionString:null,institution:{name:"Istanbul Aydın University",country:{name:"Turkey"}}},{id:"171887",title:"Prof.",name:"Zühre",middleName:null,surname:"Akarslan",slug:"zuhre-akarslan",fullName:"Zühre Akarslan",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/171887/images/system/171887.jpg",biography:"Zühre Akarslan was born in 1977 in Cyprus. She graduated from Gazi University Faculty of Dentistry, Ankara, Turkey in 2000. \r\nLater she received her Ph.D. degree from the Oral Diagnosis and Radiology Department; which was recently renamed as Oral and Dentomaxillofacial Radiology, from the same university. \r\nShe is working as a full-time Associate Professor and is a lecturer and an academic researcher. \r\nHer expertise areas are dental caries, cancer, dental fear and anxiety, gag reflex in dentistry, oral medicine, and dentomaxillofacial radiology.",institutionString:"Gazi University",institution:{name:"Gazi University",country:{name:"Turkey"}}},{id:"256417",title:"Associate Prof.",name:"Sanaz",middleName:null,surname:"Sadry",slug:"sanaz-sadry",fullName:"Sanaz Sadry",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/256417/images/8106_n.jpg",biography:null,institutionString:null,institution:null},{id:"272237",title:"Dr.",name:"Pinar",middleName:"Kiymet",surname:"Karataban",slug:"pinar-karataban",fullName:"Pinar Karataban",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/272237/images/8911_n.png",biography:"Assist.Prof.Dr.Pınar Kıymet Karataban, DDS PhD \n\nDr.Pınar Kıymet Karataban was born in Istanbul in 1975. After her graduation from Marmara University Faculty of Dentistry in 1998 she started her PhD in Paediatric Dentistry focused on children with special needs; mainly children with Cerebral Palsy. She finished her pHD thesis entitled \\'Investigation of occlusion via cast analysis and evaluation of dental caries prevalance, periodontal status and muscle dysfunctions in children with cerebral palsy” in 2008. She got her Assist. Proffessor degree in Istanbul Aydın University Paediatric Dentistry Department in 2015-2018. ın 2019 she started her new career in Bahcesehir University, Istanbul as Head of Department of Pediatric Dentistry. In 2020 she was accepted to BAU International University, Batumi as Professor of Pediatric Dentistry. She’s a lecturer in the same university meanwhile working part-time in private practice in Ege Dental Studio (https://www.egedisklinigi.com/) a multidisciplinary dental clinic in Istanbul. Her main interests are paleodontology, ancient and contemporary dentistry, oral microbiology, cerebral palsy and special care dentistry. She has national and international publications, scientific reports and is a member of IAPO (International Association for Paleodontology), IADH (International Association of Disability and Oral Health) and EAPD (European Association of Pediatric Dentistry).",institutionString:null,institution:null},{id:"202198",title:"Dr.",name:"Buket",middleName:null,surname:"Aybar",slug:"buket-aybar",fullName:"Buket Aybar",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/202198/images/6955_n.jpg",biography:"Buket Aybar, DDS, PhD, was born in 1971. She graduated from Istanbul University, Faculty of Dentistry, in 1992 and completed her PhD degree on Oral and Maxillofacial Surgery in Istanbul University in 1997.\nDr. Aybar is currently a full-time professor in Istanbul University, Faculty of Dentistry Department of Oral and Maxillofacial Surgery. She has teaching responsibilities in graduate and postgraduate programs. Her clinical practice includes mainly dentoalveolar surgery.\nHer topics of interest are biomaterials science and cell culture studies. She has many articles in international and national scientific journals and chapters in books; she also has participated in several scientific projects supported by Istanbul University Research fund.",institutionString:null,institution:null},{id:"260116",title:"Dr.",name:"Mehmet",middleName:null,surname:"Yaltirik",slug:"mehmet-yaltirik",fullName:"Mehmet Yaltirik",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/260116/images/7413_n.jpg",biography:"Birth Date 25.09.1965\r\nBirth Place Adana- Turkey\r\nSex Male\r\nMarrial Status Bachelor\r\nDriving License Acquired\r\nMother Tongue Turkish\r\n\r\nAddress:\r\nWork:University of Istanbul,Faculty of Dentistry, Department of Oral Surgery and Oral Medicine 34093 Capa,Istanbul- TURKIYE",institutionString:null,institution:null},{id:"172009",title:"Dr.",name:"Fatma Deniz",middleName:null,surname:"Uzuner",slug:"fatma-deniz-uzuner",fullName:"Fatma Deniz Uzuner",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/172009/images/7122_n.jpg",biography:"Dr. Deniz Uzuner was born in 1969 in Kocaeli-TURKEY. After graduating from TED Ankara College in 1986, she attended the Hacettepe University, Faculty of Dentistry in Ankara. \nIn 1993 she attended the Gazi University, Faculty of Dentistry, Department of Orthodontics for her PhD education. After finishing the PhD education, she worked as orthodontist in Ankara Dental Hospital under the Turkish Government, Ministry of Health and in a special Orthodontic Clinic till 2011. Between 2011 and 2016, Dr. Deniz Uzuner worked as a specialist in the Department of Orthodontics, Faculty of Dentistry, Gazi University in Ankara/Turkey. In 2016, she was appointed associate professor. Dr. Deniz Uzuner has authored 23 Journal Papers, 3 Book Chapters and has had 39 oral/poster presentations. She is a member of the Turkish Orthodontic Society. Her knowledge of English is at an advanced level.",institutionString:null,institution:null},{id:"332914",title:"Dr.",name:"Muhammad Saad",middleName:null,surname:"Shaikh",slug:"muhammad-saad-shaikh",fullName:"Muhammad Saad Shaikh",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Jinnah Sindh Medical University",country:{name:"Pakistan"}}},{id:"315775",title:"Dr.",name:"Feng",middleName:null,surname:"Luo",slug:"feng-luo",fullName:"Feng Luo",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Sichuan University",country:{name:"China"}}},{id:"423519",title:"Dr.",name:"Sizakele",middleName:null,surname:"Ngwenya",slug:"sizakele-ngwenya",fullName:"Sizakele Ngwenya",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of the Witwatersrand",country:{name:"South Africa"}}},{id:"419270",title:"Dr.",name:"Ann",middleName:null,surname:"Chianchitlert",slug:"ann-chianchitlert",fullName:"Ann Chianchitlert",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Walailak University",country:{name:"Thailand"}}},{id:"419271",title:"Dr.",name:"Diane",middleName:null,surname:"Selvido",slug:"diane-selvido",fullName:"Diane Selvido",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Walailak University",country:{name:"Thailand"}}},{id:"419272",title:"Dr.",name:"Irin",middleName:null,surname:"Sirisoontorn",slug:"irin-sirisoontorn",fullName:"Irin Sirisoontorn",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Walailak University",country:{name:"Thailand"}}},{id:"355660",title:"Dr.",name:"Anitha",middleName:null,surname:"Mani",slug:"anitha-mani",fullName:"Anitha Mani",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"SRM Dental College",country:{name:"India"}}},{id:"355612",title:"Dr.",name:"Janani",middleName:null,surname:"Karthikeyan",slug:"janani-karthikeyan",fullName:"Janani Karthikeyan",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"SRM Dental College",country:{name:"India"}}},{id:"334400",title:"Dr.",name:"Suvetha",middleName:null,surname:"Siva",slug:"suvetha-siva",fullName:"Suvetha Siva",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"SRM Dental College",country:{name:"India"}}}]}},subseries:{item:{id:"94",type:"subseries",title:"Climate Change and Environmental Sustainability",keywords:"Environmental protection, Socio-economic development, Resource exploitation, Environmental degradation, Climate change, Degraded ecosystems, Biodiversity loss",scope:"\r\n\tSustainable development focuses on linking economic development with environmental protection and social development to ensure future prosperity for people and the planet. To tackle global challenges of development and environment, the United Nations General Assembly in 2015 adopted the 17 Sustainable Development Goals. SDGs emphasize that environmental sustainability should be strongly linked to socio-economic development, which should be decoupled from escalating resource use and environmental degradation for the purpose of reducing environmental stress, enhancing human welfare, and improving regional equity. Moreover, sustainable development seeks a balance between human development and decrease in ecological/environmental marginal benefits. Under the increasing stress of climate change, many environmental problems have emerged causing severe impacts at both global and local scales, driving ecosystem service reduction and biodiversity loss. Humanity’s relationship with resource exploitation and environment protection is a major global concern, as new threats to human and environmental security emerge in the Anthropocene. Currently, the world is facing significant challenges in environmental sustainability to protect global environments and to restore degraded ecosystems, while maintaining human development with regional equality. Thus, environmental sustainability with healthy natural ecosystems is critical to maintaining human prosperity in our warming planet.
",coverUrl:"https://cdn.intechopen.com/series_topics/covers/94.jpg",hasOnlineFirst:!0,hasPublishedBooks:!1,annualVolume:11978,editor:{id:"61855",title:"Dr.",name:"Yixin",middleName:null,surname:"Zhang",slug:"yixin-zhang",fullName:"Yixin Zhang",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002aYWJgQAO/Profile_Picture_2022-06-09T11:36:35.jpg",biography:"Professor Yixin Zhang is an aquatic ecologist with over 30 years of research and teaching experience in three continents (Asia, Europe, and North America) in Stream Ecology, Riparian Ecology, Urban Ecology, and Ecosystem Restoration and Aquatic Conservation, Human-Nature Interactions and Sustainability, Urbanization Impact on Aquatic Ecosystems. He got his Ph.D. in Animal Ecology at Umeå University in Sweden in 1998. He conducted postdoc research in stream ecology at the University of California at Santa Barbara in the USA. After that, he was a postdoc research fellow at the University of British Columbia in Canada to do research on large-scale stream experimental manipulation and watershed ecological survey in temperate rainforests of BC. He was a faculty member at the University of Hong Kong to run ecological research projects on aquatic insects, fishes, and newts in Tropical Asian streams. He also conducted research in streams, rivers, and caves in Texas, USA, to study the ecology of macroinvertebrates, big-claw river shrimp, fish, turtles, and bats. Current research interests include trophic flows across ecosystems; watershed impacts of land-use change on biodiversity and ecosystem functioning; ecological civilization and water resource management; urban ecology and urban/rural sustainable development.",institutionString:null,institution:{name:"Soochow University",institutionURL:null,country:{name:"China"}}},editorTwo:null,editorThree:null,series:{id:"24",title:"Sustainable Development",doi:"10.5772/intechopen.100361",issn:null},editorialBoard:null},onlineFirstChapters:{paginationCount:2,paginationItems:[{id:"82392",title:"Nanomaterials as Novel Biomarkers for Cancer Nanotheranostics: State of the Art",doi:"10.5772/intechopen.105700",signatures:"Hao Yu, Zhihai Han, Cunrong Chen and Leisheng Zhang",slug:"nanomaterials-as-novel-biomarkers-for-cancer-nanotheranostics-state-of-the-art",totalDownloads:22,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Biotechnology - Biosensors, Biomaterials and Tissue Engineering - Annual Volume 2022",coverURL:"https://cdn.intechopen.com/books/images_new/11405.jpg",subseries:{id:"9",title:"Biotechnology - Biosensors, Biomaterials and Tissue Engineering"}}},{id:"81778",title:"Influence of Mechanical Properties of Biomaterials on the Reconstruction of Biomedical Parts via Additive Manufacturing Techniques: An Overview",doi:"10.5772/intechopen.104465",signatures:"Babatunde Olamide Omiyale, Akeem Abiodun Rasheed, Robinson Omoboyode Akinnusi and Temitope Olumide Olugbade",slug:"influence-of-mechanical-properties-of-biomaterials-on-the-reconstruction-of-biomedical-parts-via-add",totalDownloads:10,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Biotechnology - Biosensors, Biomaterials and Tissue Engineering - Annual Volume 2022",coverURL:"https://cdn.intechopen.com/books/images_new/11405.jpg",subseries:{id:"9",title:"Biotechnology - Biosensors, Biomaterials and Tissue Engineering"}}}]},publishedBooks:{paginationCount:1,paginationItems:[{type:"book",id:"7437",title:"Nanomedicines",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7437.jpg",slug:"nanomedicines",publishedDate:"February 13th 2019",editedByType:"Edited by",bookSignature:"Muhammad Akhyar Farrukh",hash:"0e1f5f6258f074c533976c4f4d248568",volumeInSeries:5,fullTitle:"Nanomedicines",editors:[{id:"63182",title:"Dr.",name:"Muhammad Akhyar",middleName:null,surname:"Farrukh",slug:"muhammad-akhyar-farrukh",fullName:"Muhammad Akhyar Farrukh",profilePictureURL:"https://mts.intechopen.com/storage/users/63182/images/system/63182.png",institutionString:"Forman Christian College",institution:{name:"Forman Christian College",institutionURL:null,country:{name:"Pakistan"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null}]},testimonialsList:[{id:"8",text:"I work with IntechOpen for a number of reasons: their professionalism, their mission in support of Open Access publishing, and the quality of their peer-reviewed publications, but also because they believe in equality.",author:{id:"202192",name:"Catrin",surname:"Rutland",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/202192/images/system/202192.png",slug:"catrin-rutland",institution:{id:"134",name:"University of Nottingham",country:{id:null,name:"United Kingdom"}}}},{id:"27",text:"The opportunity to work with a prestigious publisher allows for the possibility to collaborate with more research groups interested in animal nutrition, leading to the development of new feeding strategies and food valuation while being more sustainable with the environment, allowing more readers to learn about the subject.",author:{id:"175967",name:"Manuel",surname:"Gonzalez Ronquillo",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/175967/images/system/175967.png",slug:"manuel-gonzalez-ronquillo",institution:{id:"6221",name:"Universidad Autónoma del Estado de México",country:{id:null,name:"Mexico"}}}},{id:"18",text:"It was great publishing with IntechOpen, the process was straightforward and I had support all along.",author:{id:"71579",name:"Berend",surname:"Olivier",institutionString:"Utrecht University",profilePictureURL:"https://mts.intechopen.com/storage/users/71579/images/system/71579.png",slug:"berend-olivier",institution:{id:"253",name:"Utrecht University",country:{id:null,name:"Netherlands"}}}}]},submityourwork:{pteSeriesList:[{id:"14",title:"Artificial Intelligence",numberOfPublishedBooks:9,numberOfPublishedChapters:90,numberOfOpenTopics:6,numberOfUpcomingTopics:0,issn:"2633-1403",doi:"10.5772/intechopen.79920",isOpenForSubmission:!0},{id:"7",title:"Biomedical Engineering",numberOfPublishedBooks:12,numberOfPublishedChapters:104,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2631-5343",doi:"10.5772/intechopen.71985",isOpenForSubmission:!0}],lsSeriesList:[{id:"11",title:"Biochemistry",numberOfPublishedBooks:32,numberOfPublishedChapters:319,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2632-0983",doi:"10.5772/intechopen.72877",isOpenForSubmission:!0},{id:"25",title:"Environmental Sciences",numberOfPublishedBooks:1,numberOfPublishedChapters:12,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2754-6713",doi:"10.5772/intechopen.100362",isOpenForSubmission:!0},{id:"10",title:"Physiology",numberOfPublishedBooks:11,numberOfPublishedChapters:141,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2631-8261",doi:"10.5772/intechopen.72796",isOpenForSubmission:!0}],hsSeriesList:[{id:"3",title:"Dentistry",numberOfPublishedBooks:8,numberOfPublishedChapters:133,numberOfOpenTopics:2,numberOfUpcomingTopics:0,issn:"2631-6218",doi:"10.5772/intechopen.71199",isOpenForSubmission:!0},{id:"6",title:"Infectious Diseases",numberOfPublishedBooks:13,numberOfPublishedChapters:113,numberOfOpenTopics:3,numberOfUpcomingTopics:1,issn:"2631-6188",doi:"10.5772/intechopen.71852",isOpenForSubmission:!0},{id:"13",title:"Veterinary Medicine and Science",numberOfPublishedBooks:11,numberOfPublishedChapters:107,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2632-0517",doi:"10.5772/intechopen.73681",isOpenForSubmission:!0}],sshSeriesList:[{id:"22",title:"Business, Management and Economics",numberOfPublishedBooks:1,numberOfPublishedChapters:19,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2753-894X",doi:"10.5772/intechopen.100359",isOpenForSubmission:!0},{id:"23",title:"Education and Human Development",numberOfPublishedBooks:0,numberOfPublishedChapters:5,numberOfOpenTopics:1,numberOfUpcomingTopics:1,issn:null,doi:"10.5772/intechopen.100360",isOpenForSubmission:!0},{id:"24",title:"Sustainable Development",numberOfPublishedBooks:0,numberOfPublishedChapters:16,numberOfOpenTopics:5,numberOfUpcomingTopics:0,issn:null,doi:"10.5772/intechopen.100361",isOpenForSubmission:!0}],subseriesList:[{id:"14",title:"Cell and Molecular Biology",scope:"The Cell and Molecular Biology topic within the IntechOpen Biochemistry Series aims to rapidly publish contributions on all aspects of cell and molecular biology, including aspects related to biochemical and genetic research (not only in humans but all living beings). We encourage the submission of manuscripts that provide novel and mechanistic insights that report significant advances in the fields. Topics include, but are not limited to: Advanced techniques of cellular and molecular biology (Molecular methodologies, imaging techniques, and bioinformatics); Biological activities at the molecular level; Biological processes of cell functions, cell division, senescence, maintenance, and cell death; Biomolecules interactions; Cancer; Cell biology; Chemical biology; Computational biology; Cytochemistry; Developmental biology; Disease mechanisms and therapeutics; DNA, and RNA metabolism; Gene functions, genetics, and genomics; Genetics; Immunology; Medical microbiology; Molecular biology; Molecular genetics; Molecular processes of cell and organelle dynamics; Neuroscience; Protein biosynthesis, degradation, and functions; Regulation of molecular interactions in a cell; Signalling networks and system biology; Structural biology; Virology and microbiology.",coverUrl:"https://cdn.intechopen.com/series_topics/covers/14.jpg",keywords:"Omics (Transcriptomics; Proteomics; Metabolomics), Molecular Biology, Cell Biology, Signal Transduction and Regulation, Cell Growth and Differentiation, Apoptosis, Necroptosis, Ferroptosis, Autophagy, Cell Cycle, Macromolecules and Complexes, Gene Expression"},{id:"15",title:"Chemical Biology",scope:"Chemical biology spans the fields of chemistry and biology involving the application of biological and chemical molecules and techniques. In recent years, the application of chemistry to biological molecules has gained significant interest in medicinal and pharmacological studies. This topic will be devoted to understanding the interplay between biomolecules and chemical compounds, their structure and function, and their potential applications in related fields. Being a part of the biochemistry discipline, the ideas and concepts that have emerged from Chemical Biology have affected other related areas. This topic will closely deal with all emerging trends in this discipline.",coverUrl:"https://cdn.intechopen.com/series_topics/covers/15.jpg",keywords:"Phenolic Compounds, Essential Oils, Modification of Biomolecules, Glycobiology, Combinatorial Chemistry, Therapeutic peptides, Enzyme Inhibitors"},{id:"17",title:"Metabolism",scope:"Metabolism is frequently defined in biochemistry textbooks as the overall process that allows living systems to acquire and use the free energy they need for their vital functions or the chemical processes that occur within a living organism to maintain life. Behind these definitions are hidden all the aspects of normal and pathological functioning of all processes that the topic ‘Metabolism’ will cover within the Biochemistry Series. Thus all studies on metabolism will be considered for publication.",coverUrl:"https://cdn.intechopen.com/series_topics/covers/17.jpg",keywords:"Biomolecules Metabolism, Energy Metabolism, Metabolic Pathways, Key Metabolic Enzymes, Metabolic Adaptation"},{id:"18",title:"Proteomics",scope:"With the recognition that the human genome cannot provide answers to the etiology of a disorder, changes in the proteins expressed by a genome became a focus in research. Thus proteomics, an area of research that detects all protein forms expressed in an organism, including splice isoforms and post-translational modifications, is more suitable than genomics for a comprehensive understanding of the biochemical processes that govern life. The most common proteomics applications are currently in the clinical field for the identification, in a variety of biological matrices, of biomarkers for diagnosis and therapeutic intervention of disorders. From the comparison of proteomic profiles of control and disease or different physiological states, which may emerge, changes in protein expression can provide new insights into the roles played by some proteins in human pathologies. Understanding how proteins function and interact with each other is another goal of proteomics that makes this approach even more intriguing. Specialized technology and expertise are required to assess the proteome of any biological sample. Currently, proteomics relies mainly on mass spectrometry (MS) combined with electrophoretic (1 or 2-DE-MS) and/or chromatographic techniques (LC-MS/MS). MS is an excellent tool that has gained popularity in proteomics because of its ability to gather a complex body of information such as cataloging protein expression, identifying protein modification sites, and defining protein interactions. The Proteomics topic aims to attract contributions on all aspects of MS-based proteomics that, by pushing the boundaries of MS capabilities, may address biological problems that have not been resolved yet.",coverUrl:"https://cdn.intechopen.com/series_topics/covers/18.jpg",keywords:"Mono- and Two-Dimensional Gel Electrophoresis (1-and 2-DE), Liquid Chromatography (LC), Mass Spectrometry/Tandem Mass Spectrometry (MS; MS/MS), Proteins"}],annualVolumeBook:{},thematicCollection:[],selectedSeries:null,selectedSubseries:null},seriesLanding:{item:{id:"11",title:"Biochemistry",doi:"10.5772/intechopen.72877",issn:"2632-0983",scope:"Biochemistry, the study of chemical transformations occurring within living organisms, impacts all areas of life sciences, from molecular crystallography and genetics to ecology, medicine, and population biology. Biochemistry examines macromolecules - proteins, nucleic acids, carbohydrates, and lipids – and their building blocks, structures, functions, and interactions. Much of biochemistry is devoted to enzymes, proteins that catalyze chemical reactions, enzyme structures, mechanisms of action and their roles within cells. Biochemistry also studies small signaling molecules, coenzymes, inhibitors, vitamins, and hormones, which play roles in life processes. Biochemical experimentation, besides coopting classical chemistry methods, e.g., chromatography, adopted new techniques, e.g., X-ray diffraction, electron microscopy, NMR, radioisotopes, and developed sophisticated microbial genetic tools, e.g., auxotroph mutants and their revertants, fermentation, etc. More recently, biochemistry embraced the ‘big data’ omics systems. Initial biochemical studies have been exclusively analytic: dissecting, purifying, and examining individual components of a biological system; in the apt words of Efraim Racker (1913 –1991), “Don’t waste clean thinking on dirty enzymes.” Today, however, biochemistry is becoming more agglomerative and comprehensive, setting out to integrate and describe entirely particular biological systems. The ‘big data’ metabolomics can define the complement of small molecules, e.g., in a soil or biofilm sample; proteomics can distinguish all the comprising proteins, e.g., serum; metagenomics can identify all the genes in a complex environment, e.g., the bovine rumen. This Biochemistry Series will address the current research on biomolecules and the emerging trends with great promise.",coverUrl:"https://cdn.intechopen.com/series/covers/11.jpg",latestPublicationDate:"July 5th, 2022",hasOnlineFirst:!0,numberOfOpenTopics:4,numberOfPublishedChapters:319,numberOfPublishedBooks:32,editor:{id:"31610",title:"Dr.",name:"Miroslav",middleName:null,surname:"Blumenberg",fullName:"Miroslav Blumenberg",profilePictureURL:"https://mts.intechopen.com/storage/users/31610/images/system/31610.jpg",biography:"Miroslav Blumenberg, Ph.D., was born in Subotica and received his BSc in Belgrade, Yugoslavia. He completed his Ph.D. at MIT in Organic Chemistry; he followed up his Ph.D. with two postdoctoral study periods at Stanford University. Since 1983, he has been a faculty member of the RO Perelman Department of Dermatology, NYU School of Medicine, where he is codirector of a training grant in cutaneous biology. Dr. Blumenberg’s research is focused on the epidermis, expression of keratin genes, transcription profiling, keratinocyte differentiation, inflammatory diseases and cancers, and most recently the effects of the microbiome on the skin. He has published more than 100 peer-reviewed research articles and graduated numerous Ph.D. and postdoctoral students.",institutionString:null,institution:{name:"New York University Langone Medical Center",institutionURL:null,country:{name:"United States of America"}}},subseries:[{id:"14",title:"Cell and Molecular Biology",keywords:"Omics (Transcriptomics; Proteomics; Metabolomics), Molecular Biology, Cell Biology, Signal Transduction and Regulation, Cell Growth and Differentiation, Apoptosis, Necroptosis, Ferroptosis, Autophagy, Cell Cycle, Macromolecules and Complexes, Gene Expression",scope:"The Cell and Molecular Biology topic within the IntechOpen Biochemistry Series aims to rapidly publish contributions on all aspects of cell and molecular biology, including aspects related to biochemical and genetic research (not only in humans but all living beings). We encourage the submission of manuscripts that provide novel and mechanistic insights that report significant advances in the fields. Topics include, but are not limited to: Advanced techniques of cellular and molecular biology (Molecular methodologies, imaging techniques, and bioinformatics); Biological activities at the molecular level; Biological processes of cell functions, cell division, senescence, maintenance, and cell death; Biomolecules interactions; Cancer; Cell biology; Chemical biology; Computational biology; Cytochemistry; Developmental biology; Disease mechanisms and therapeutics; DNA, and RNA metabolism; Gene functions, genetics, and genomics; Genetics; Immunology; Medical microbiology; Molecular biology; Molecular genetics; Molecular processes of cell and organelle dynamics; Neuroscience; Protein biosynthesis, degradation, and functions; Regulation of molecular interactions in a cell; Signalling networks and system biology; Structural biology; Virology and microbiology.",annualVolume:11410,isOpenForSubmission:!0,coverUrl:"https://cdn.intechopen.com/series_topics/covers/14.jpg",editor:{id:"165627",title:"Dr.",name:"Rosa María",middleName:null,surname:"Martínez-Espinosa",fullName:"Rosa María Martínez-Espinosa",profilePictureURL:"https://mts.intechopen.com/storage/users/165627/images/system/165627.jpeg",institutionString:null,institution:{name:"University of Alicante",institutionURL:null,country:{name:"Spain"}}},editorTwo:null,editorThree:null,editorialBoard:[{id:"79367",title:"Dr.",name:"Ana Isabel",middleName:null,surname:"Flores",fullName:"Ana Isabel Flores",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRpIOQA0/Profile_Picture_1632418099564",institutionString:null,institution:{name:"Hospital Universitario 12 De Octubre",institutionURL:null,country:{name:"Spain"}}},{id:"328234",title:"Ph.D.",name:"Christian",middleName:null,surname:"Palavecino",fullName:"Christian Palavecino",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y000030DhEhQAK/Profile_Picture_1628835318625",institutionString:null,institution:{name:"Central University of Chile",institutionURL:null,country:{name:"Chile"}}},{id:"186585",title:"Dr.",name:"Francisco Javier",middleName:null,surname:"Martin-Romero",fullName:"Francisco Javier Martin-Romero",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bSB3HQAW/Profile_Picture_1631258137641",institutionString:null,institution:{name:"University of Extremadura",institutionURL:null,country:{name:"Spain"}}}]},{id:"15",title:"Chemical Biology",keywords:"Phenolic Compounds, Essential Oils, Modification of Biomolecules, Glycobiology, Combinatorial Chemistry, Therapeutic peptides, Enzyme Inhibitors",scope:"Chemical biology spans the fields of chemistry and biology involving the application of biological and chemical molecules and techniques. In recent years, the application of chemistry to biological molecules has gained significant interest in medicinal and pharmacological studies. This topic will be devoted to understanding the interplay between biomolecules and chemical compounds, their structure and function, and their potential applications in related fields. Being a part of the biochemistry discipline, the ideas and concepts that have emerged from Chemical Biology have affected other related areas. This topic will closely deal with all emerging trends in this discipline.",annualVolume:11411,isOpenForSubmission:!0,coverUrl:"https://cdn.intechopen.com/series_topics/covers/15.jpg",editor:{id:"441442",title:"Dr.",name:"Şükrü",middleName:null,surname:"Beydemir",fullName:"Şükrü Beydemir",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y00003GsUoIQAV/Profile_Picture_1634557147521",institutionString:null,institution:{name:"Anadolu University",institutionURL:null,country:{name:"Turkey"}}},editorTwo:{id:"13652",title:"Prof.",name:"Deniz",middleName:null,surname:"Ekinci",fullName:"Deniz Ekinci",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002aYLT1QAO/Profile_Picture_1634557223079",institutionString:null,institution:{name:"Ondokuz Mayıs University",institutionURL:null,country:{name:"Turkey"}}},editorThree:null,editorialBoard:[{id:"219081",title:"Dr.",name:"Abdulsamed",middleName:null,surname:"Kükürt",fullName:"Abdulsamed Kükürt",profilePictureURL:"https://mts.intechopen.com/storage/users/219081/images/system/219081.png",institutionString:null,institution:{name:"Kafkas University",institutionURL:null,country:{name:"Turkey"}}},{id:"241413",title:"Dr.",name:"Azhar",middleName:null,surname:"Rasul",fullName:"Azhar Rasul",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRT1oQAG/Profile_Picture_1635251978933",institutionString:null,institution:{name:"Government College University, Faisalabad",institutionURL:null,country:{name:"Pakistan"}}},{id:"178316",title:"Ph.D.",name:"Sergey",middleName:null,surname:"Sedykh",fullName:"Sergey Sedykh",profilePictureURL:"https://mts.intechopen.com/storage/users/178316/images/system/178316.jfif",institutionString:null,institution:{name:"Novosibirsk State University",institutionURL:null,country:{name:"Russia"}}}]},{id:"17",title:"Metabolism",keywords:"Biomolecules Metabolism, Energy Metabolism, Metabolic Pathways, Key Metabolic Enzymes, Metabolic Adaptation",scope:"Metabolism is frequently defined in biochemistry textbooks as the overall process that allows living systems to acquire and use the free energy they need for their vital functions or the chemical processes that occur within a living organism to maintain life. Behind these definitions are hidden all the aspects of normal and pathological functioning of all processes that the topic ‘Metabolism’ will cover within the Biochemistry Series. Thus all studies on metabolism will be considered for publication.",annualVolume:11413,isOpenForSubmission:!0,coverUrl:"https://cdn.intechopen.com/series_topics/covers/17.jpg",editor:{id:"138626",title:"Dr.",name:"Yannis",middleName:null,surname:"Karamanos",fullName:"Yannis Karamanos",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002g6Jv2QAE/Profile_Picture_1629356660984",institutionString:null,institution:{name:"Artois University",institutionURL:null,country:{name:"France"}}},editorTwo:null,editorThree:null,editorialBoard:[{id:"243049",title:"Dr.",name:"Anca",middleName:null,surname:"Pantea Stoian",fullName:"Anca Pantea Stoian",profilePictureURL:"https://mts.intechopen.com/storage/users/243049/images/system/243049.jpg",institutionString:null,institution:{name:"Carol Davila University of Medicine and Pharmacy",institutionURL:null,country:{name:"Romania"}}},{id:"203824",title:"Dr.",name:"Attilio",middleName:null,surname:"Rigotti",fullName:"Attilio Rigotti",profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",institutionString:null,institution:{name:"Pontifical Catholic University of Chile",institutionURL:null,country:{name:"Chile"}}},{id:"300470",title:"Dr.",name:"Yanfei (Jacob)",middleName:null,surname:"Qi",fullName:"Yanfei (Jacob) Qi",profilePictureURL:"https://mts.intechopen.com/storage/users/300470/images/system/300470.jpg",institutionString:null,institution:{name:"Centenary Institute of Cancer Medicine and Cell Biology",institutionURL:null,country:{name:"Australia"}}}]},{id:"18",title:"Proteomics",keywords:"Mono- and Two-Dimensional Gel Electrophoresis (1-and 2-DE), Liquid Chromatography (LC), Mass Spectrometry/Tandem Mass Spectrometry (MS; MS/MS), Proteins",scope:"With the recognition that the human genome cannot provide answers to the etiology of a disorder, changes in the proteins expressed by a genome became a focus in research. Thus proteomics, an area of research that detects all protein forms expressed in an organism, including splice isoforms and post-translational modifications, is more suitable than genomics for a comprehensive understanding of the biochemical processes that govern life. The most common proteomics applications are currently in the clinical field for the identification, in a variety of biological matrices, of biomarkers for diagnosis and therapeutic intervention of disorders. From the comparison of proteomic profiles of control and disease or different physiological states, which may emerge, changes in protein expression can provide new insights into the roles played by some proteins in human pathologies. Understanding how proteins function and interact with each other is another goal of proteomics that makes this approach even more intriguing. Specialized technology and expertise are required to assess the proteome of any biological sample. Currently, proteomics relies mainly on mass spectrometry (MS) combined with electrophoretic (1 or 2-DE-MS) and/or chromatographic techniques (LC-MS/MS). MS is an excellent tool that has gained popularity in proteomics because of its ability to gather a complex body of information such as cataloging protein expression, identifying protein modification sites, and defining protein interactions. The Proteomics topic aims to attract contributions on all aspects of MS-based proteomics that, by pushing the boundaries of MS capabilities, may address biological problems that have not been resolved yet.",annualVolume:11414,isOpenForSubmission:!0,coverUrl:"https://cdn.intechopen.com/series_topics/covers/18.jpg",editor:{id:"200689",title:"Prof.",name:"Paolo",middleName:null,surname:"Iadarola",fullName:"Paolo Iadarola",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bSCl8QAG/Profile_Picture_1623568118342",institutionString:null,institution:{name:"University of Pavia",institutionURL:null,country:{name:"Italy"}}},editorTwo:{id:"201414",title:"Dr.",name:"Simona",middleName:null,surname:"Viglio",fullName:"Simona Viglio",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRKDHQA4/Profile_Picture_1630402531487",institutionString:null,institution:{name:"University of Pavia",institutionURL:null,country:{name:"Italy"}}},editorThree:null,editorialBoard:[{id:"72288",title:"Dr.",name:"Arli Aditya",middleName:null,surname:"Parikesit",fullName:"Arli Aditya Parikesit",profilePictureURL:"https://mts.intechopen.com/storage/users/72288/images/system/72288.jpg",institutionString:null,institution:{name:"Indonesia International Institute for Life Sciences",institutionURL:null,country:{name:"Indonesia"}}},{id:"40928",title:"Dr.",name:"Cesar",middleName:null,surname:"Lopez-Camarillo",fullName:"Cesar Lopez-Camarillo",profilePictureURL:"https://mts.intechopen.com/storage/users/40928/images/3884_n.png",institutionString:null,institution:{name:"Universidad Autónoma de la Ciudad de México",institutionURL:null,country:{name:"Mexico"}}},{id:"81926",title:"Dr.",name:"Shymaa",middleName:null,surname:"Enany",fullName:"Shymaa Enany",profilePictureURL:"https://mts.intechopen.com/storage/users/81926/images/system/81926.png",institutionString:"Suez Canal University",institution:{name:"Suez Canal University",institutionURL:null,country:{name:"Egypt"}}}]}]}},libraryRecommendation:{success:null,errors:{},institutions:[]},route:{name:"chapter.detail",path:"/chapters/68176",hash:"",query:{},params:{id:"68176"},fullPath:"/chapters/68176",meta:{},from:{name:null,path:"/",hash:"",query:{},params:{},fullPath:"/",meta:{}}}},function(){var e;(e=document.currentScript||document.scripts[document.scripts.length-1]).parentNode.removeChild(e)}()