A mathematical analysis is conducted to illustrate the controllability of the Raman soliton self-frequency shift with polynomial nonlinearity in metamaterials by using collective variable method. The polynomial nonlinearity is due to the expanding nonlinear polarization P NL in a series over the field E up to the seventh order. Gaussian assumption is selected to these pulses on a generalized mode. The numerical simulation of soliton parameter variation is given for the Gaussian pulse parameters.
- Raman solitons
- polynomial nonlinearity
- collective variables
Much attention has been devoted to the understanding of metamaterials [1, 2, 3, 4]. Through its engineered structures, researchers are able to control and manipulate the electromagnetic fields . Using the freedom of design that metamaterials provide, electromagnetic fields can be redirected at will and propose a design strategy . A general recipe for the design of media that create perfect invisibility within the accuracy of geometrical optics is developed. The imperfections of invisibility can be made arbitrarily small to hide objects that are much larger than the wavelength .
Especially, mathematical operations can be performed based on suitably designed metamaterials blocks, such as spatial differentiation, integration, or convolution . Soliton pulse can evolve owning to delicate balance between dispersion and nonlinearity. However, it is always a challenge to compensate for the loss when engineering these types of waveguide using metamaterials. The strong perturbation of a soliton envelope caused by the stimulated Raman scattering confines the energy scalability preventing the so-called dissipative soliton resonance . It is important to know the limit we can reach expanding the nonlinear polarization in a series over the field . The fourth-order nonlinear susceptibility , the fifth-order nonlinearity , and the seventh-order nonlinearity have been measured [11, 12]. The polynomial mode nonlinearity is due to the nonlinear polarization of metamaterials in the power-series expansion form where terms are kept up to the seventh order in the field [10, 12, 13, 14, 15]. This chapter conducts mathematical analysis to illustrate the controllability of the Raman soliton self-frequency shift with polynomial nonlinearity in metamaterials by using collective variable method.
2. Governing model
The dimensionless form nonlinear Schrödinger’s equation (NLSE) that governs the propagation of Raman soliton through optical metamaterials, with polynomial law nonlinearity, is given by [16, 17, 18, 19, 20, 21, 22, 23, 24].
In this model, represents the complex valued wave function with the independent variables being and that represent spatial and temporal variables, respectively. The first term represents the temporal evolution of nonlinear wave, while the coefficient is the group velocity dispersion (GVD). The coefficients of for correspond to the nonlinear terms. Together, they form polynomial mode nonlinearity. The polynomial mode nonlinearity is due to the nonlinear polarization of metamaterials in the power-series expansion form where terms are kept up to the seventh order in the field [10, 12, 13, 14, 15]. It must be noted here that when and , the model Eq. (1) collapses to Kerr mode nonlinearity which is due to third-order polarization . However, if and and , one arrives at parabolic mode nonlinearity, and it is from the fifth-order polarization [15, 30]. Thus, polynomial mode stands as an extension version to Kerr and parabolic modes. Actually, the Raman effect is not influenced by the properties of the metamaterials; however, the Raman coefficient combines with the dispersive magnetic permeability of the metamaterials leading to additional higher-order nonlinear terms [10, 12, 14]. The group velocity and self-phase modulation term produce the delicate balance dispersion and nonlinearity that accounts for the formation of the stable soliton. On the right hand side, describes intermodel dispersion, represents the self-steepening term in order to avoid the formation of shocks, and is the complex higher-order nonlinear dispersion coefficient.
3. Mathematical formulation
The pulse may not only be able to translate as a whole entity, but it may also execute more or less complex internal vibrations depending on the type of the perturbations in the system. This particle-like behavior has led to the formulation of the collective variable techniques . The basic idea is that the soliton solution depends on a collective of variables, called CVs, symbolically , which represent pulse width, amplitude, chirp, frequency, and so on [25, 26, 27, 28]. To this end, the original field is decomposed into two components, say at position in the metamaterials and at time t, in the following way:
where the first component constitutes soliton solution and the second one represents the residual radiation that is known as small amplitude dispersive waves. Introduction of these CVs increases the phase space of the dynamical system.
In order for the system to remain in the original phase space and best fit for the static solution, the CV method is obtained by configuring the function and minimizes residual free energy (RFE) , where
The approximation of neglecting the
Let CVs evolve only in a particular direction to minimize the PFE in the dynamical system with the following simple way:
The rate of change of with respect to the normalized distance is defined as.
where stands for the real part. Here, the weak equality indicates that the constraints need not be exactly zero .
Then, we define a second set of constraints:
while the Jacobian is given by
4. Computational results
In this part the adiabatic parameter dynamics of solitons in optical metamaterials with polynomial nonlinearity will be obtained by CV method. A Gaussian is given by
where is the soliton amplitude, is the center position of the soliton, is the inverse width of the pulse, is the soliton chirp, is the soliton frequency, and is the soliton phase. Also, is the Gaussian parameter, where .
In this case, with :
5. Numerical simulation
The nonlinear dynamical system discussed in the previous section is plotted to illustrate the collective variables numerically; see Figure 1. The parameter values are as follows: , , , , , , , and [10, 12, 15, 30].
This continuous surface plot shows the dynamical relationship between the time and collective variables, in Figure 1. It shows soliton amplitude, center position, inverse width of the pulse, chirp, and phase keeping the original shape as time goes by. This is because group velocity and self-phase modulation term produce the delicate balance dispersion and nonlinearity that accounts for the formation of the stable soliton. It also describes Stokes Raman scattering that is due to transmitted wave at higher frequency and anti-Stokes Raman scattering where transmitted wave is at lower frequency by Figure 1(e) . These results are consistent with Raman soliton scattering effect.
This chapter gives Raman soliton solutions in optical metamaterials that is studied with polynomial nonlinearity. The polynomial mode nonlinearity is due to expanding the nonlinear polarization in a series over the field up to the seventh order [13, 14, 15]. The polynomial mode nonlinearity is an extension of the Kerr and parabolic mode nonlinearity, which are from third- and fifth-order polarization [15, 30], respectively. The analytical results are supplemented with numerical simulation by collective variables. The continuous surface plot shows the dynamical relationship between the time and collective variables. It shows soliton amplitude, center position, inverse width of the pulse, chirp, and phase keeping the original shape as time goes by since group velocity and self-phase modulation term produce the delicate balance dispersion and nonlinearity. It also describes Stokes Raman scattering that is due to transmitted wave at higher frequency and anti-Stokes Raman scattering where transmitted wave is at lower frequency by Figure 1(e) [8, 29].
In the future, the set of plot with will be plotted, and third-order dispersion (TOD) and fourth-order dispersion (FOD) will be included . Nonlinear polarization of medium in the form of a power-series expansion, keeping the terms up to the ninth order, will be explored .
This work was supported by NSF EAGER grants: 1649173.