Passive hemostats.
\\n\\n
These books synthesize perspectives of renowned scientists from the world’s most prestigious institutions - from Fukushima Renewable Energy Institute in Japan to Stanford University in the United States, including Columbia University (US), University of Sidney (AU), University of Miami (USA), Cardiff University (UK), and many others.
\\n\\nThis collaboration embodied the true essence of Open Access by simplifying the approach to OA publishing for Academic editors and authors who contributed their research and allowed the new research to be made available free and open to anyone anywhere in the world.
\\n\\nTo celebrate the 50 books published, we have gathered them at one location - just one click away, so that you can easily browse the subjects of your interest, download the content directly, share it or read online.
\\n\\n\\n\\n\\n"}]',published:!0,mainMedia:null},components:[{type:"htmlEditorComponent",content:'
IntechOpen and Knowledge Unlatched formed a partnership to support researchers working in engineering sciences by enabling an easier approach to publishing Open Access content. Using the Knowledge Unlatched crowdfunding model to raise the publishing costs through libraries around the world, Open Access Publishing Fee (OAPF) was not required from the authors.
\n\nInitially, the partnership supported engineering research, but it soon grew to include physical and life sciences, attracting more researchers to the advantages of Open Access publishing.
\n\n\n\nThese books synthesize perspectives of renowned scientists from the world’s most prestigious institutions - from Fukushima Renewable Energy Institute in Japan to Stanford University in the United States, including Columbia University (US), University of Sidney (AU), University of Miami (USA), Cardiff University (UK), and many others.
\n\nThis collaboration embodied the true essence of Open Access by simplifying the approach to OA publishing for Academic editors and authors who contributed their research and allowed the new research to be made available free and open to anyone anywhere in the world.
\n\nTo celebrate the 50 books published, we have gathered them at one location - just one click away, so that you can easily browse the subjects of your interest, download the content directly, share it or read online.
\n\n\n\n\n'}],latestNews:[{slug:"webinar-introduction-to-open-science-wednesday-18-may-1-pm-cest-20220518",title:"Webinar: Introduction to Open Science | Wednesday 18 May, 1 PM CEST"},{slug:"step-in-the-right-direction-intechopen-launches-a-portfolio-of-open-science-journals-20220414",title:"Step in the Right Direction: IntechOpen Launches a Portfolio of Open Science Journals"},{slug:"let-s-meet-at-london-book-fair-5-7-april-2022-olympia-london-20220321",title:"Let’s meet at London Book Fair, 5-7 April 2022, Olympia London"},{slug:"50-books-published-as-part-of-intechopen-and-knowledge-unlatched-ku-collaboration-20220316",title:"50 Books published as part of IntechOpen and Knowledge Unlatched (KU) Collaboration"},{slug:"intechopen-joins-the-united-nations-sustainable-development-goals-publishers-compact-20221702",title:"IntechOpen joins the United Nations Sustainable Development Goals Publishers Compact"},{slug:"intechopen-signs-exclusive-representation-agreement-with-lsr-libros-servicios-y-representaciones-s-a-de-c-v-20211123",title:"IntechOpen Signs Exclusive Representation Agreement with LSR Libros Servicios y Representaciones S.A. de C.V"},{slug:"intechopen-expands-partnership-with-research4life-20211110",title:"IntechOpen Expands Partnership with Research4Life"},{slug:"introducing-intechopen-book-series-a-new-publishing-format-for-oa-books-20210915",title:"Introducing IntechOpen Book Series - A New Publishing Format for OA Books"}]},book:{item:{type:"book",id:"1300",leadTitle:null,fullTitle:"Applications of Ionic Liquids in Science and Technology",title:"Applications of Ionic Liquids in Science and Technology",subtitle:null,reviewType:"peer-reviewed",abstract:"This volume of the two volume set on ionic liquids focuses on the applications of ionic liquids in a growing range of areas. Throughout the 1990’s, it seemed that most of the attention in the area of ionic liquids applications was directed toward their use as solvents for organic and transition-metal-catalyzed reactions. Certainly this interest continues on to the present date, but the most innovative uses of ionic liquids span a much more diverse field than just synthesis. Some main topics of coverage include the application of RTILs in various electronic applications (batteries, capacitors, and light emitting materials), polymers (synthesis and functionalization), nanomaterials (synthesis and stabilization), and separations. More unusual applications can be noted in the fields of biomass utilization, spectroscopy, optics, lubricants, fuels, and refrigerants. It is hoped that this diversity of this volume will serve as an inspiration for even further advances in the use of RTILs.",isbn:null,printIsbn:"978-953-307-605-8",pdfIsbn:"978-953-51-4430-4",doi:"10.5772/1769",price:159,priceEur:175,priceUsd:205,slug:"applications-of-ionic-liquids-in-science-and-technology",numberOfPages:530,isOpenForSubmission:!1,isInWos:1,isInBkci:!0,hash:"45c85b0f82277e20691ffd487d5fecd6",bookSignature:"Scott Handy",publishedDate:"September 22nd 2011",coverURL:"https://cdn.intechopen.com/books/images_new/1300.jpg",numberOfDownloads:125801,numberOfWosCitations:268,numberOfCrossrefCitations:46,numberOfCrossrefCitationsByBook:31,numberOfDimensionsCitations:164,numberOfDimensionsCitationsByBook:50,hasAltmetrics:1,numberOfTotalCitations:478,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"November 8th 2010",dateEndSecondStepPublish:"December 6th 2010",dateEndThirdStepPublish:"April 12th 2011",dateEndFourthStepPublish:"May 12th 2011",dateEndFifthStepPublish:"July 11th 2011",currentStepOfPublishingProcess:5,indexedIn:"1,2,3,4,5,6,7,8",editedByType:"Edited by",kuFlag:!1,featuredMarkup:null,editors:[{id:"42658",title:"Prof.",name:"Scott",middleName:null,surname:"Handy",slug:"scott-handy",fullName:"Scott Handy",profilePictureURL:"https://mts.intechopen.com/storage/users/42658/images/system/42658.jpg",biography:"Dr. Scott Handy received his Ph.D. in Chemistry from Indiana University in 1996 under the direction of Professor Paul Grieco. Following an NIH postdoctoral fellowship at Stanford University in the labs of Professor Paul Wender, he joined the Chemistry Department at Binghamton University in 1999. In 2006 he moved to Middle Tennessee State University as an Associate Professor and was promoted to Professor in 2011. His research interests are in the areas of cross-coupling reactions (particularly regioselectivity in the couplings of polyhaloheteroaromatics), ionic liquids (as recyclable solvents for transition metal-catalyzed reactions and electrochemistry), and the synthesis and use of aurones to address biological questions.",institutionString:"Middle Tennessee State University",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"1",totalChapterViews:"0",totalEditedBooks:"4",institution:{name:"Middle Tennessee State University",institutionURL:null,country:{name:"United States of America"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"935",title:"Fluid Dynamics",slug:"materials-science-fluid-mechanics-fluid-dynamics"}],chapters:[{id:"20202",title:"Ionic Liquids in Catalytic Biomass Transformation",doi:"10.5772/20451",slug:"ionic-liquids-in-catalytic-biomass-transformation",totalDownloads:4526,totalCrossrefCites:2,totalDimensionsCites:3,hasAltmetrics:0,abstract:null,signatures:"Zhu Yinghuai, Algin Oh Biying, Xiao Siwei, Narayan S Hosmane and John A. Maguire",downloadPdfUrl:"/chapter/pdf-download/20202",previewPdfUrl:"/chapter/pdf-preview/20202",authors:[{id:"39000",title:"Prof.",name:"Narayan",surname:"Hosmane",slug:"narayan-hosmane",fullName:"Narayan Hosmane"},{id:"48342",title:"Dr.",name:"Yinghuai",surname:"Zhu",slug:"yinghuai-zhu",fullName:"Yinghuai Zhu"},{id:"48343",title:"Prof.",name:"John",surname:"Maguire",slug:"john-maguire",fullName:"John Maguire"}],corrections:null},{id:"20203",title:"Biotransformation of Underutilized Natural Resource to Valuable Compounds in Ionic Liquid: Enzymatic Synthesis of Caffeic Acid Phenethyl Ester Analogues from Immature Coffee Beans",doi:"10.5772/20966",slug:"biotransformation-of-underutilized-natural-resource-to-valuable-compounds-in-ionic-liquid-enzymatic-",totalDownloads:3041,totalCrossrefCites:1,totalDimensionsCites:2,hasAltmetrics:0,abstract:null,signatures:"Atsushi Kurata, Tokio Fujita, and Noriaki Kishimoto",downloadPdfUrl:"/chapter/pdf-download/20203",previewPdfUrl:"/chapter/pdf-preview/20203",authors:[{id:"41239",title:"Dr.",name:"Atsushi",surname:"Kurata",slug:"atsushi-kurata",fullName:"Atsushi Kurata"},{id:"137036",title:"Dr.",name:"Tokio",surname:"Fujita",slug:"tokio-fujita",fullName:"Tokio Fujita"},{id:"137037",title:"Prof.",name:"Noriaki",surname:"Kishimoto",slug:"noriaki-kishimoto",fullName:"Noriaki Kishimoto"}],corrections:null},{id:"20204",title:"Undeniable Contribution of Aprotic Room Temperature Ionic Liquids in the Security of Li-Ion Batteries",doi:"10.5772/20493",slug:"undeniable-contribution-of-aprotic-room-temperature-ionic-liquids-in-the-security-of-li-ion-batterie",totalDownloads:3606,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,abstract:null,signatures:"Claude-Montigny Bénédicte, Stefan Claudia Simona and Violleau David",downloadPdfUrl:"/chapter/pdf-download/20204",previewPdfUrl:"/chapter/pdf-preview/20204",authors:[{id:"39224",title:"Dr.",name:"Bénédicte",surname:"Claude-Montigny",slug:"benedicte-claude-montigny",fullName:"Bénédicte Claude-Montigny"},{id:"57337",title:"Dr.",name:"Claudia Simona",surname:"Stefan",slug:"claudia-simona-stefan",fullName:"Claudia Simona Stefan"},{id:"57338",title:"Dr.",name:"David",surname:"Violleau",slug:"david-violleau",fullName:"David Violleau"}],corrections:null},{id:"20205",title:"Ionic Liquids in Charge Storage Devices: Effect of Purification on Performance",doi:"10.5772/23870",slug:"ionic-liquids-in-charge-storage-devices-effect-of-purification-on-performance",totalDownloads:2471,totalCrossrefCites:0,totalDimensionsCites:1,hasAltmetrics:0,abstract:null,signatures:"John D. Stenger-Smith, Andrew P. Chafin, Clare F. Kline Jr., Gregory S. Ostrom and Roxanne L. Quintana",downloadPdfUrl:"/chapter/pdf-download/20205",previewPdfUrl:"/chapter/pdf-preview/20205",authors:[{id:"54189",title:"Dr.",name:"John",surname:"Stenger-Smith",slug:"john-stenger-smith",fullName:"John Stenger-Smith"},{id:"56030",title:"Mr",name:"Andrew",surname:"Chafin",slug:"andrew-chafin",fullName:"Andrew Chafin"},{id:"137046",title:"Mr.",name:"Clare",surname:"Kline Jr.",slug:"clare-kline-jr.",fullName:"Clare Kline Jr."},{id:"137047",title:"Mr.",name:"Gregory",surname:"Ostrom",slug:"gregory-ostrom",fullName:"Gregory Ostrom"},{id:"137048",title:"Ms.",name:"Roxanne",surname:"Quintana",slug:"roxanne-quintana",fullName:"Roxanne Quintana"}],corrections:null},{id:"20206",title:"Polymers with Ionic Liquid Fragments as Potential Conducting Materials for Advanced Applications",doi:"10.5772/23440",slug:"polymers-with-ionic-liquid-fragments-as-potential-conducting-materials-for-advanced-applications",totalDownloads:2464,totalCrossrefCites:0,totalDimensionsCites:2,hasAltmetrics:0,abstract:null,signatures:"Santiago V. Luis, Eduardo García-Verdugo, M. Isabel Burguete, Andreu Andrio, Sergio Mollá and Vicente Compan",downloadPdfUrl:"/chapter/pdf-download/20206",previewPdfUrl:"/chapter/pdf-preview/20206",authors:[{id:"52043",title:"Prof.",name:"Vicente",surname:"Compañ",slug:"vicente-compan",fullName:"Vicente Compañ"},{id:"71485",title:"Prof.",name:"Santiago V.",surname:"Luis Lafuente",slug:"santiago-v.-luis-lafuente",fullName:"Santiago V. Luis Lafuente"},{id:"71487",title:"Prof.",name:"Eduardo",surname:"García -Verdugo",slug:"eduardo-garcia-verdugo",fullName:"Eduardo García -Verdugo"},{id:"71488",title:"Prof.",name:"María Isabel",surname:"Burguete",slug:"maria-isabel-burguete",fullName:"María Isabel Burguete"},{id:"71490",title:"Prof.",name:"Andreu",surname:"Andrio Balado",slug:"andreu-andrio-balado",fullName:"Andreu Andrio Balado"},{id:"71491",title:"MSc",name:"Sergio",surname:"Mollá Romano",slug:"sergio-molla-romano",fullName:"Sergio Mollá Romano"}],corrections:null},{id:"20207",title:"Ionic Liquids for the Electric Double Layer Capacitor Applications",doi:"10.5772/23412",slug:"ionic-liquids-for-the-electric-double-layer-capacitor-applications",totalDownloads:10108,totalCrossrefCites:4,totalDimensionsCites:11,hasAltmetrics:0,abstract:null,signatures:"Takaya Sato, Shoko Marukane and Takashi Morinaga",downloadPdfUrl:"/chapter/pdf-download/20207",previewPdfUrl:"/chapter/pdf-preview/20207",authors:[{id:"51962",title:"Prof.",name:"Takaya",surname:"Sato",slug:"takaya-sato",fullName:"Takaya Sato"},{id:"56542",title:"Ms.",name:"Shoko",surname:"Marukane",slug:"shoko-marukane",fullName:"Shoko Marukane"},{id:"56543",title:"Dr.",name:"Takashi",surname:"Morinaga",slug:"takashi-morinaga",fullName:"Takashi Morinaga"}],corrections:null},{id:"20208",title:"Ionic Liquid Used in Long-Lifetime Polymer Light-Emitting Electrochemical Cells",doi:"10.5772/20624",slug:"ionic-liquid-used-in-long-lifetime-polymer-light-emitting-electrochemical-cells",totalDownloads:3385,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,abstract:null,signatures:"Yan Shao",downloadPdfUrl:"/chapter/pdf-download/20208",previewPdfUrl:"/chapter/pdf-preview/20208",authors:[{id:"39811",title:"Dr.",name:"Yan",surname:"Shao",slug:"yan-shao",fullName:"Yan Shao"}],corrections:null},{id:"20209",title:"Ionic Liquids Gelation with Polymeric Materials: The Ion Jelly Approach",doi:"10.5772/24464",slug:"ionic-liquids-gelation-with-polymeric-materials-the-ion-jelly-approach",totalDownloads:5605,totalCrossrefCites:0,totalDimensionsCites:5,hasAltmetrics:0,abstract:null,signatures:"Nuno M.T. Lourenço, Ana V.M. Nunes, Catarina M.M. Duarte and Pedro Vidinha",downloadPdfUrl:"/chapter/pdf-download/20209",previewPdfUrl:"/chapter/pdf-preview/20209",authors:[{id:"57541",title:"Dr.",name:"Ana",surname:"Nunes",slug:"ana-nunes",fullName:"Ana Nunes"},{id:"57546",title:"Dr.",name:"Pedro",surname:"Vidinha",slug:"pedro-vidinha",fullName:"Pedro Vidinha"},{id:"57547",title:"Dr.",name:"Nuno",surname:"null",slug:"nuno-null",fullName:"Nuno null"},{id:"57548",title:"Prof.",name:"Catarina",surname:"Duarte",slug:"catarina-duarte",fullName:"Catarina Duarte"},{id:"136017",title:"Dr.",name:"Nuno",surname:"Lourenço",slug:"nuno-lourenco",fullName:"Nuno Lourenço"}],corrections:null},{id:"20210",title:"Environmentally Friendly Synthesis of Polymer-Grafted Nanoparticles",doi:"10.5772/23271",slug:"environmentally-friendly-synthesis-of-polymer-grafted-nanoparticles",totalDownloads:4155,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,abstract:null,signatures:"Norio Tsubokawa",downloadPdfUrl:"/chapter/pdf-download/20210",previewPdfUrl:"/chapter/pdf-preview/20210",authors:[{id:"51351",title:"Prof.",name:"Norio",surname:"Tsubokawa",slug:"norio-tsubokawa",fullName:"Norio Tsubokawa"}],corrections:null},{id:"20211",title:"Ionic Liquids as Porogens in the Synthesis of Molecularly Imprinted Polymers",doi:"10.5772/21725",slug:"ionic-liquids-as-porogens-in-the-synthesis-of-molecularly-imprinted-polymers",totalDownloads:3484,totalCrossrefCites:0,totalDimensionsCites:6,hasAltmetrics:0,abstract:null,signatures:"Katherine M Booker, Clovia I Holdsworth, Michael C Bowyer and Adam McCluskey",downloadPdfUrl:"/chapter/pdf-download/20211",previewPdfUrl:"/chapter/pdf-preview/20211",authors:[{id:"44482",title:"Prof.",name:"Adam",surname:"McCluskey",slug:"adam-mccluskey",fullName:"Adam McCluskey"},{id:"58154",title:"Ms.",name:"Katherine",surname:"Booker",slug:"katherine-booker",fullName:"Katherine Booker"},{id:"58155",title:"Dr.",name:"Clovia",surname:"Holdsworth",slug:"clovia-holdsworth",fullName:"Clovia Holdsworth"},{id:"58156",title:"Dr.",name:"Michael",surname:"Bowyer",slug:"michael-bowyer",fullName:"Michael Bowyer"}],corrections:null},{id:"20212",title:"Magnetorheological Elastomers Containing Ionic Liquids",doi:"10.5772/21869",slug:"magnetorheological-elastomers-containing-ionic-liquids",totalDownloads:2863,totalCrossrefCites:1,totalDimensionsCites:2,hasAltmetrics:0,abstract:null,signatures:"Marcin Masłowski and Marian Zaborski",downloadPdfUrl:"/chapter/pdf-download/20212",previewPdfUrl:"/chapter/pdf-preview/20212",authors:[{id:"45159",title:"Prof.",name:"Marian",surname:"Zaborski",slug:"marian-zaborski",fullName:"Marian Zaborski"},{id:"47865",title:"MSc.",name:"Marcin",surname:"Masłowski",slug:"marcin-maslowski",fullName:"Marcin Masłowski"}],corrections:null},{id:"20213",title:"Concepts for the Stabilization of Metal Nanoparticles in Ionic Liquids",doi:"10.5772/22111",slug:"concepts-for-the-stabilization-of-metal-nanoparticles-in-ionic-liquids",totalDownloads:12133,totalCrossrefCites:13,totalDimensionsCites:51,hasAltmetrics:0,abstract:null,signatures:"Alexander Kraynov and Thomas E. Müller",downloadPdfUrl:"/chapter/pdf-download/20213",previewPdfUrl:"/chapter/pdf-preview/20213",authors:[{id:"46289",title:"Dr.",name:"Thomas",surname:"Müller",slug:"thomas-muller",fullName:"Thomas Müller"},{id:"95358",title:"Dr",name:"Alexander",surname:"Kraynov",slug:"alexander-kraynov",fullName:"Alexander Kraynov"}],corrections:null},{id:"20214",title:"Studies Regarding the Nickel Electrodeposition from Choline Chloride Based Ionic Liquids",doi:"10.5772/23676",slug:"studies-regarding-the-nickel-electrodeposition-from-choline-chloride-based-ionic-liquids",totalDownloads:5099,totalCrossrefCites:0,totalDimensionsCites:8,hasAltmetrics:0,abstract:null,signatures:"Liana Anicai, Andreea Florea and Teodor Visan",downloadPdfUrl:"/chapter/pdf-download/20214",previewPdfUrl:"/chapter/pdf-preview/20214",authors:[{id:"53141",title:"Dr.",name:"Liana",surname:"Anicai",slug:"liana-anicai",fullName:"Liana Anicai"},{id:"53147",title:"Dr.",name:"Andreea",surname:"Florea",slug:"andreea-florea",fullName:"Andreea Florea"},{id:"53148",title:"Prof.",name:"Teodor",surname:"Visan",slug:"teodor-visan",fullName:"Teodor Visan"}],corrections:null},{id:"20215",title:"Ionic Liquids as Advantageous Solvents for Preparation of Nanostructures",doi:"10.5772/23588",slug:"ionic-liquids-as-advantageous-solvents-for-preparation-of-nanostructures",totalDownloads:6918,totalCrossrefCites:1,totalDimensionsCites:6,hasAltmetrics:0,abstract:null,signatures:"Alexandrina Nan and Jürgen Liebscher",downloadPdfUrl:"/chapter/pdf-download/20215",previewPdfUrl:"/chapter/pdf-preview/20215",authors:[{id:"52686",title:"Prof.",name:"Jürgen",surname:"Liebscher",slug:"jurgen-liebscher",fullName:"Jürgen Liebscher"},{id:"56805",title:"Dr.",name:"Alexandrina",surname:"Nan",slug:"alexandrina-nan",fullName:"Alexandrina Nan"}],corrections:null},{id:"20216",title:"Ionic Liquids in Separation Techniques",doi:"10.5772/25201",slug:"ionic-liquids-in-separation-techniques",totalDownloads:8525,totalCrossrefCites:4,totalDimensionsCites:7,hasAltmetrics:0,abstract:null,signatures:"Jolanta Flieger and Anna Czajkowska-Żelazko",downloadPdfUrl:"/chapter/pdf-download/20216",previewPdfUrl:"/chapter/pdf-preview/20216",authors:[{id:"20797",title:"Dr.",name:"Jolanta",surname:"Flieger",slug:"jolanta-flieger",fullName:"Jolanta Flieger"},{id:"136020",title:"Prof.",name:"Czajkowska",surname:"Żelazko",slug:"czajkowska-zelazko",fullName:"Czajkowska Żelazko"}],corrections:null},{id:"20217",title:"Ionic Liquid-Mediated Liquid-Liquid Extraction",doi:"10.5772/24160",slug:"ionic-liquid-mediated-liquid-liquid-extraction",totalDownloads:6460,totalCrossrefCites:4,totalDimensionsCites:7,hasAltmetrics:0,abstract:null,signatures:"Qilong Ren, Qiwei Yang, Yan Yan, Huabin Xing, Zongbi Bao, Baogen Su and Yiwen Yang",downloadPdfUrl:"/chapter/pdf-download/20217",previewPdfUrl:"/chapter/pdf-preview/20217",authors:[{id:"55831",title:"Dr.",name:"Qiwei",surname:"Yang",slug:"qiwei-yang",fullName:"Qiwei Yang"},{id:"101710",title:"Dr.",name:"Huabin",surname:"Xing",slug:"huabin-xing",fullName:"Huabin Xing"},{id:"101712",title:"BSc.",name:"Yan",surname:"Yan",slug:"yan-yan",fullName:"Yan Yan"},{id:"101713",title:"Dr.",name:"Zongbi",surname:"Bao",slug:"zongbi-bao",fullName:"Zongbi Bao"},{id:"101714",title:"Dr.",name:"Baogen",surname:"Su",slug:"baogen-su",fullName:"Baogen Su"},{id:"101715",title:"Prof.",name:"Yiwen",surname:"Yang",slug:"yiwen-yang",fullName:"Yiwen Yang"},{id:"101716",title:"Prof.",name:"Qilong",surname:"Ren",slug:"qilong-ren",fullName:"Qilong Ren"}],corrections:null},{id:"20218",title:"Liquid Matrices in MALDI-MS",doi:"10.5772/24407",slug:"liquid-matrices-in-maldi-ms",totalDownloads:5226,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,abstract:null,signatures:"Yuko Fukuyama",downloadPdfUrl:"/chapter/pdf-download/20218",previewPdfUrl:"/chapter/pdf-preview/20218",authors:[{id:"57153",title:"Dr.",name:"Yuko",surname:"Fukuyama",slug:"yuko-fukuyama",fullName:"Yuko Fukuyama"}],corrections:null},{id:"20219",title:"Ionic Liquids in Separation of Metal Ions from Aqueous Solutions",doi:"10.5772/23909",slug:"ionic-liquids-in-separation-of-metal-ions-from-aqueous-solutions",totalDownloads:6460,totalCrossrefCites:7,totalDimensionsCites:18,hasAltmetrics:0,abstract:null,signatures:"Magdalena Regel-Rosocka and Maciej Wisniewski",downloadPdfUrl:"/chapter/pdf-download/20219",previewPdfUrl:"/chapter/pdf-preview/20219",authors:[{id:"54388",title:"Dr.",name:"Magdalena",surname:"Regel-Rosocka",slug:"magdalena-regel-rosocka",fullName:"Magdalena Regel-Rosocka"},{id:"57514",title:"Prof.",name:"Maciej",surname:"Wisniewski",slug:"maciej-wisniewski",fullName:"Maciej Wisniewski"}],corrections:null},{id:"20220",title:"Inner Filter Effect in the Fluorescence Emission Spectra of Room Temperature Ionic Liquids with-β-Carotene",doi:"10.5772/20768",slug:"inner-filter-effect-in-the-fluorescence-emission-spectra-of-room-temperature-ionic-liquids-with-caro",totalDownloads:10751,totalCrossrefCites:1,totalDimensionsCites:3,hasAltmetrics:0,abstract:null,signatures:"Krzysztof Pawlak, Andrzej Skrzypczak and Grazyna E. Bialek-Bylka",downloadPdfUrl:"/chapter/pdf-download/20220",previewPdfUrl:"/chapter/pdf-preview/20220",authors:[{id:"40450",title:"Prof.",name:"Grazyna",surname:"Bialek-Bylka",slug:"grazyna-bialek-bylka",fullName:"Grazyna Bialek-Bylka"},{id:"56670",title:"MSc.",name:"Krzysztof",surname:"Pawlak",slug:"krzysztof-pawlak",fullName:"Krzysztof Pawlak"},{id:"56671",title:"Dr.",name:"Andrzej",surname:"Skrzypczak",slug:"andrzej-skrzypczak",fullName:"Andrzej Skrzypczak"}],corrections:null},{id:"20221",title:"Ionic Liquid Lubricant with Ammonium Salts for Magnetic Media",doi:"10.5772/23244",slug:"ionic-liquid-lubricant-with-ammonium-salts-for-magnetic-media",totalDownloads:3117,totalCrossrefCites:1,totalDimensionsCites:3,hasAltmetrics:0,abstract:null,signatures:"Hirofumi Kondo",downloadPdfUrl:"/chapter/pdf-download/20221",previewPdfUrl:"/chapter/pdf-preview/20221",authors:[{id:"51270",title:"Dr.",name:"Hirofumi",surname:"Kondo",slug:"hirofumi-kondo",fullName:"Hirofumi Kondo"}],corrections:null},{id:"20222",title:"Application of Ionic Liquids to Space Propulsion",doi:"10.5772/23807",slug:"application-of-ionic-liquids-to-space-propulsion",totalDownloads:6905,totalCrossrefCites:2,totalDimensionsCites:11,hasAltmetrics:0,abstract:null,signatures:"Fahrat Kamal, Batonneau Yann, Brahmi Rachid and Kappenstein Charles",downloadPdfUrl:"/chapter/pdf-download/20222",previewPdfUrl:"/chapter/pdf-preview/20222",authors:[{id:"53845",title:"Prof.",name:"Charles",surname:"Kappenstein",slug:"charles-kappenstein",fullName:"Charles Kappenstein"},{id:"57522",title:"Mr.",name:"Yann",surname:"Batonneau",slug:"yann-batonneau",fullName:"Yann Batonneau"},{id:"57523",title:"Dr.",name:"Kamal",surname:"Farhat",slug:"kamal-farhat",fullName:"Kamal Farhat"},{id:"57524",title:"Prof.",name:"Rachid",surname:"Brahmi",slug:"rachid-brahmi",fullName:"Rachid Brahmi"}],corrections:null},{id:"20223",title:"The Latent Application of Ionic Liquids in Absorption Refrigeration",doi:"10.5772/23953",slug:"the-latent-application-of-ionic-liquids-in-absorption-refrigeration",totalDownloads:5179,totalCrossrefCites:1,totalDimensionsCites:12,hasAltmetrics:0,abstract:null,signatures:"Shiqiang Liang, Wei Chen, Keyong Cheng, Yongxian Guo and Xiaohong Gui",downloadPdfUrl:"/chapter/pdf-download/20223",previewPdfUrl:"/chapter/pdf-preview/20223",authors:[{id:"53748",title:"Dr.",name:"Wei",surname:"Chen",slug:"wei-chen",fullName:"Wei Chen"},{id:"54609",title:"Dr.",name:"Liang",surname:"Shiqiang",slug:"liang-shiqiang",fullName:"Liang Shiqiang"},{id:"56525",title:"Dr.",name:"Keyong",surname:"Cheng",slug:"keyong-cheng",fullName:"Keyong Cheng"},{id:"137043",title:"Prof.",name:"Yongxian",surname:"Guo",slug:"yongxian-guo",fullName:"Yongxian Guo"},{id:"137044",title:"Prof.",name:"Xiaohong",surname:"Gui",slug:"xiaohong-gui",fullName:"Xiaohong Gui"}],corrections:null},{id:"20224",title:"Optofluidic Compound Lenses Made with Ionic Liquids",doi:"10.5772/24197",slug:"optofluidic-compound-lenses-made-with-ionic-liquids",totalDownloads:3326,totalCrossrefCites:4,totalDimensionsCites:6,hasAltmetrics:0,abstract:null,signatures:"Sergio Calixto, Martha Rosete-Aguilar, Francisco J. Sanchez-Marin, Olga L. Torres-Rocha, E. Militza Martinez Prado and Margarita Calixto-Solano",downloadPdfUrl:"/chapter/pdf-download/20224",previewPdfUrl:"/chapter/pdf-preview/20224",authors:[{id:"56076",title:"Dr.",name:"Sergio",surname:"Calixto",slug:"sergio-calixto",fullName:"Sergio Calixto"},{id:"56639",title:"Dr.",name:"Martha",surname:"Rosete-Aguilar",slug:"martha-rosete-aguilar",fullName:"Martha Rosete-Aguilar"},{id:"56640",title:"Ms.",name:"Margarita Sofia",surname:"Calixto-Solano",slug:"margarita-sofia-calixto-solano",fullName:"Margarita Sofia Calixto-Solano"},{id:"56641",title:"MSc.",name:"Olga",surname:"Torres-Rocha",slug:"olga-torres-rocha",fullName:"Olga Torres-Rocha"},{id:"93455",title:"Dr.",name:"Francisco",surname:"Sanchez-Marin",slug:"francisco-sanchez-marin",fullName:"Francisco Sanchez-Marin"},{id:"93460",title:"MSc.",name:"Militza",surname:"Martinez-Prado",slug:"militza-martinez-prado",fullName:"Militza Martinez-Prado"}],corrections:null}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},subseries:null,tags:null},relatedBooks:[{type:"book",id:"327",title:"Ionic Liquids",subtitle:"Classes and Properties",isOpenForSubmission:!1,hash:"659a4b5cbf7f388a9e559b5b558006ca",slug:"ionic-liquids-classes-and-properties",bookSignature:"Scott T. Handy",coverURL:"https://cdn.intechopen.com/books/images_new/327.jpg",editedByType:"Edited by",editors:[{id:"42658",title:"Prof.",name:"Scott",surname:"Handy",slug:"scott-handy",fullName:"Scott Handy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"4504",title:"Ionic Liquids",subtitle:"Current State of the Art",isOpenForSubmission:!1,hash:"da08fe684d11113d583db336e16ee5b6",slug:"ionic-liquids-current-state-of-the-art",bookSignature:"Scott Handy",coverURL:"https://cdn.intechopen.com/books/images_new/4504.jpg",editedByType:"Edited by",editors:[{id:"42658",title:"Prof.",name:"Scott",surname:"Handy",slug:"scott-handy",fullName:"Scott Handy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5381",title:"Ionic Liquids",subtitle:"Progress and Developments in",isOpenForSubmission:!1,hash:"e87c37c4d014c11121453605e6d0f37a",slug:"progress-and-developments-in-ionic-liquids",bookSignature:"Scott Handy",coverURL:"https://cdn.intechopen.com/books/images_new/5381.jpg",editedByType:"Edited by",editors:[{id:"42658",title:"Prof.",name:"Scott",surname:"Handy",slug:"scott-handy",fullName:"Scott Handy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3178",title:"Ionic Liquids",subtitle:"New Aspects for the Future",isOpenForSubmission:!1,hash:"2ef68ccc1945a4fc50c6c212bc2f0bd3",slug:"ionic-liquids-new-aspects-for-the-future",bookSignature:"Jun-ichi Kadokawa",coverURL:"https://cdn.intechopen.com/books/images_new/3178.jpg",editedByType:"Edited by",editors:[{id:"16342",title:"Dr.",name:"Jun-ichi",surname:"Kadokawa",slug:"jun-ichi-kadokawa",fullName:"Jun-ichi Kadokawa"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10573",title:"Computational Overview of Fluid Structure Interaction",subtitle:null,isOpenForSubmission:!1,hash:"3950d1f9c82160d23bc594d00ec2ffbb",slug:"computational-overview-of-fluid-structure-interaction",bookSignature:"Khaled Ghaedi, Ahmed Alhusseny, Adel Nasser and Nabeel Al-Zurf",coverURL:"https://cdn.intechopen.com/books/images_new/10573.jpg",editedByType:"Edited by",editors:[{id:"190572",title:"Dr.",name:"Khaled",surname:"Ghaedi",slug:"khaled-ghaedi",fullName:"Khaled Ghaedi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9386",title:"Direct Numerical Simulations",subtitle:"An Introduction and Applications",isOpenForSubmission:!1,hash:"158a3a0fdba295d21ff23326f5a072d5",slug:"direct-numerical-simulations-an-introduction-and-applications",bookSignature:"Srinivasa Rao",coverURL:"https://cdn.intechopen.com/books/images_new/9386.jpg",editedByType:"Edited by",editors:[{id:"6897",title:"Dr.",name:"Srinivasa",surname:"Rao",slug:"srinivasa-rao",fullName:"Srinivasa Rao"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10080",title:"Vortex Dynamics Theories and Applications",subtitle:null,isOpenForSubmission:!1,hash:"ea97962e99b3e0ebc9b46b48ba5bea14",slug:"vortex-dynamics-theories-and-applications",bookSignature:"Zambri Harun",coverURL:"https://cdn.intechopen.com/books/images_new/10080.jpg",editedByType:"Edited by",editors:[{id:"243152",title:"Dr.",name:"Zambri",surname:"Harun",slug:"zambri-harun",fullName:"Zambri Harun"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9201",title:"Advanced Supercritical Fluids Technologies",subtitle:null,isOpenForSubmission:!1,hash:"6d02d813b504c90761f9d0abca79106f",slug:"advanced-supercritical-fluids-technologies",bookSignature:"Igor Pioro",coverURL:"https://cdn.intechopen.com/books/images_new/9201.jpg",editedByType:"Edited by",editors:[{id:"15933",title:"Prof.",name:"Igor",surname:"Pioro",slug:"igor-pioro",fullName:"Igor Pioro"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],ofsBooks:[]},correction:{item:{id:"79672",slug:"corrigendum-the-physiological-ecology-of-white-nose-syndrome-wns-in-north-american-bats",title:"Corrigendum: The Physiological Ecology of White-Nose Syndrome (WNS) in North American Bats",doi:null,correctionPDFUrl:"https://cdn.intechopen.com/pdfs/79672.pdf",downloadPdfUrl:"/chapter/pdf-download/79672",previewPdfUrl:"/chapter/pdf-preview/79672",totalDownloads:null,totalCrossrefCites:null,bibtexUrl:"/chapter/bibtex/79672",risUrl:"/chapter/ris/79672",chapter:{id:"78750",slug:"the-physiological-ecology-of-white-nose-syndrome-wns-in-north-american-bats",signatures:"Craig L. Frank",dateSubmitted:"September 1st 2021",dateReviewed:"September 8th 2021",datePrePublished:"October 15th 2021",datePublished:"April 20th 2022",book:{id:"11032",title:"Bats",subtitle:"Disease-Prone but Beneficial",fullTitle:"Bats - Disease-Prone but Beneficial",slug:"bats-disease-prone-but-beneficial",publishedDate:"April 20th 2022",bookSignature:"Heimo Mikkola",coverURL:"https://cdn.intechopen.com/books/images_new/11032.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"144330",title:"Dr.",name:"Heimo",middleName:"Juhani",surname:"Mikkola",slug:"heimo-mikkola",fullName:"Heimo Mikkola"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"423579",title:"Dr.",name:"Craig L.",middleName:"L.",surname:"Frank",fullName:"Craig L. Frank",slug:"craig-l.-frank",email:"frank@fordham.edu",position:null,institution:{name:"Fordham University",institutionURL:null,country:{name:"United States of America"}}}]}},chapter:{id:"78750",slug:"the-physiological-ecology-of-white-nose-syndrome-wns-in-north-american-bats",signatures:"Craig L. Frank",dateSubmitted:"September 1st 2021",dateReviewed:"September 8th 2021",datePrePublished:"October 15th 2021",datePublished:"April 20th 2022",book:{id:"11032",title:"Bats",subtitle:"Disease-Prone but Beneficial",fullTitle:"Bats - Disease-Prone but Beneficial",slug:"bats-disease-prone-but-beneficial",publishedDate:"April 20th 2022",bookSignature:"Heimo Mikkola",coverURL:"https://cdn.intechopen.com/books/images_new/11032.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"144330",title:"Dr.",name:"Heimo",middleName:"Juhani",surname:"Mikkola",slug:"heimo-mikkola",fullName:"Heimo Mikkola"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"423579",title:"Dr.",name:"Craig L.",middleName:"L.",surname:"Frank",fullName:"Craig L. Frank",slug:"craig-l.-frank",email:"frank@fordham.edu",position:null,institution:{name:"Fordham University",institutionURL:null,country:{name:"United States of America"}}}]},book:{id:"11032",title:"Bats",subtitle:"Disease-Prone but Beneficial",fullTitle:"Bats - Disease-Prone but Beneficial",slug:"bats-disease-prone-but-beneficial",publishedDate:"April 20th 2022",bookSignature:"Heimo Mikkola",coverURL:"https://cdn.intechopen.com/books/images_new/11032.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"144330",title:"Dr.",name:"Heimo",middleName:"Juhani",surname:"Mikkola",slug:"heimo-mikkola",fullName:"Heimo Mikkola"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}}},ofsBook:{item:{type:"book",id:"11911",leadTitle:null,title:"Scientometrics - Evolution, Methods, and Applications in Research",subtitle:null,reviewType:"peer-reviewed",abstract:"
\r\n\tScientometrics is the quantitative study of science, communication in science, and science policy, according to Hess. Primarily, it is an analysis of citations of publications, but its extent is wider. In recent years, scientometrics has come to play a significant role in measuring and evaluating research performance. Scientometrics can be divided into article-level, author-level, journal-level, and even institution, or country-level metrics. Common scientometric indicators include impact factor, h-index, i10 index, science citation index, acknowledgment index, etc. In addition, co-citation, co-occurrence, collaboration, network, and clustering can be visualized using different sources/ databases and software. New developments include the evolution of altmetrics and the use of scientometrics in assessing the research performance of countries, interest domains, individuals, institutions, and universities. This field has evolved from the study of indices for improving information retrieval from peer-reviewed scientific publications to cover other types of documents and information sources relating to science, education, and technology. This has an immense scope to be used in the assessment and quality improvement of research and linking the research with the performance of individuals, departments, institutions, interest areas, and even countries. This book can help readers understand the role of scientometrics in research performance and evaluation and apply it to improving the quality of research, focusing on developing countries.
",isbn:"978-1-83768-388-8",printIsbn:"978-1-83768-387-1",pdfIsbn:"978-1-83768-389-5",doi:null,price:0,priceEur:0,priceUsd:0,slug:null,numberOfPages:0,isOpenForSubmission:!0,isSalesforceBook:!1,isNomenclature:!1,hash:"21cabdc221ee3c4ce67965075c22211f",bookSignature:"Dr. Mohan Bairwa, Dr. M. Mahbub Hossain, Dr. Neeraj Sharma and Dr. Manju Pilania",publishedDate:null,coverURL:"https://cdn.intechopen.com/books/images_new/11911.jpg",keywords:"Scientometrics, Research Evaluation, Bibliometrics, Science Policy, International Collaboration, Research Impact, LMIC, Academia, Patent Analysis, H-index, Network Effectiveness, Scientific Funding Agencies",numberOfDownloads:null,numberOfWosCitations:0,numberOfCrossrefCitations:null,numberOfDimensionsCitations:null,numberOfTotalCitations:null,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"June 10th 2022",dateEndSecondStepPublish:"July 8th 2022",dateEndThirdStepPublish:"September 6th 2022",dateEndFourthStepPublish:"November 25th 2022",dateEndFifthStepPublish:"January 24th 2023",dateConfirmationOfParticipation:null,remainingDaysToSecondStep:"3 days",secondStepPassed:!1,areRegistrationsClosed:!1,currentStepOfPublishingProcess:2,editedByType:null,kuFlag:!1,biosketch:"A pioneering researcher in the area of people-centered health services with a focus on evidence-based public health, bibliometric studies, and data analytics. A medical doctor and faculty at the Centre for Community Medicine, Dr. Bairwa was previously the Faculty In-charge of the Johns Hopkins-IIHMR co-operative MPH program at IIHMR University, India.",coeditorOneBiosketch:"Dr. M. Mahbub Hossain is a physician, public health scientist, and academician working at Texas A&M University Health Science Center, Texas, USA. His work focuses on addressing population health inequities using evidence-based multilevel interventions.",coeditorTwoBiosketch:"Dr. Neeraj Sharma is a Program Officer and MPH graduate from Johns Hopkins School of Public Health, US, pursuing his Ph.D. in Public Health. He is a specialist researcher in implementation science, road traffic injuries, and evidence building – systematic review and meta-analysis, scientometrics, and data analytics.",coeditorThreeBiosketch:"Dr. Manju Pilania is a mental health researcher, Epidemiologist, and Assistant Professor at the Department of Community Medicine and has previously been associated with Rajasthan University of Health Sciences, India. Her research interest areas include mental health, evidence-based public health practice, systematic review, and bibliometric studies.",coeditorFourBiosketch:null,coeditorFiveBiosketch:null,editors:[{id:"181864",title:"Dr.",name:"Mohan",middleName:null,surname:"Bairwa",slug:"mohan-bairwa",fullName:"Mohan Bairwa",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bSAcYQAW/Profile_Picture_2022-06-07T16:12:15.jpg",biography:"Dr Bairwa is a medical doctor, educator, and public health specialist. Currently, he is an Assistant Professor at the Centre for Community Medicine at All India Institute of Medical Sciences, New Delhi. In the past, Dr Bairwa has worked as faculty for Public Health and Epidemiology in the Institute of Health Management Research at IIHMR Univesity, Jaipur, India. He has been awarded the Doctor of Medicine (MD; Community Medicine) from Pt. B. D. Sharma Post Graduate Institute of Medical Sciences, Rohtak (Haryana), India and MBBS from SMS Medical College, Jaipur, India.\r\n \r\nHis research interests include chronic disease epidemiology, cause of death and disease burden, people-centered health care and health systems, and evidence-based public health practice and bibliometric studies. He is a part of the AIIMS Technical Support Unit to provide technical assistance to the Registrar General of India for estimation of the cause of death, SEAR NCD Service Delivery Network (a network of lead medical and health education institutions in the WHO South-East Asia region), under the ambit of WHO SEARO for strengthening people-centered NCD service delivery in the region, and PHC Support Initiative for India's primary healthcare systems. He has over 60 publications to his credit.",institutionString:"All India Institute of Medical Sciences",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"0",totalChapterViews:"0",totalEditedBooks:"0",institution:{name:"All India Institute of Medical Sciences",institutionURL:null,country:{name:"India"}}}],coeditorOne:{id:"477301",title:"Dr.",name:"M. Mahbub",middleName:null,surname:"Hossain",slug:"m.-mahbub-hossain",fullName:"M. Mahbub Hossain",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y00003SbnPjQAJ/Profile_Picture_2022-06-07T16:01:34.jpg",biography:null,institutionString:"Texas A&M University",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"0",totalChapterViews:"0",totalEditedBooks:"0",institution:{name:"Texas A&M University",institutionURL:null,country:{name:"United States of America"}}},coeditorTwo:{id:"235759",title:"Dr.",name:"Neeraj",middleName:null,surname:"Sharma",slug:"neeraj-sharma",fullName:"Neeraj Sharma",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRRakQAG/Profile_Picture_2022-06-07T16:03:20.jpg",biography:null,institutionString:"Society of Applied Studies, New Delhi",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"0",totalChapterViews:"0",totalEditedBooks:"0",institution:null},coeditorThree:{id:"181868",title:"Dr.",name:"Manju",middleName:null,surname:"Pilania",slug:"manju-pilania",fullName:"Manju Pilania",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRHYJQA4/Profile_Picture_2022-06-07T16:03:40.jpg",biography:null,institutionString:"Kalpana Chawla Government Medical College, Karnal",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"0",totalChapterViews:"0",totalEditedBooks:"0",institution:null},coeditorFour:null,coeditorFive:null,topics:[{id:"9",title:"Computer and Information Science",slug:"computer-and-information-science"}],chapters:null,productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},personalPublishingAssistant:{id:"429341",firstName:"Paula",lastName:"Gavran",middleName:null,title:"Ms.",imageUrl:"//cdnintech.com/web/frontend/www/assets/author.svg",email:"paula@intechopen.com",biography:null}},relatedBooks:[{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophile",surname:"Theophanides",slug:"theophile-theophanides",fullName:"Theophile Theophanides"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3092",title:"Anopheles mosquitoes",subtitle:"New insights into malaria vectors",isOpenForSubmission:!1,hash:"c9e622485316d5e296288bf24d2b0d64",slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",bookSignature:"Sylvie Manguin",coverURL:"https://cdn.intechopen.com/books/images_new/3092.jpg",editedByType:"Edited by",editors:[{id:"50017",title:"Prof.",name:"Sylvie",surname:"Manguin",slug:"sylvie-manguin",fullName:"Sylvie Manguin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"371",title:"Abiotic Stress in Plants",subtitle:"Mechanisms and Adaptations",isOpenForSubmission:!1,hash:"588466f487e307619849d72389178a74",slug:"abiotic-stress-in-plants-mechanisms-and-adaptations",bookSignature:"Arun Shanker and B. Venkateswarlu",coverURL:"https://cdn.intechopen.com/books/images_new/371.jpg",editedByType:"Edited by",editors:[{id:"58592",title:"Dr.",name:"Arun",surname:"Shanker",slug:"arun-shanker",fullName:"Arun Shanker"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"314",title:"Regenerative Medicine and Tissue Engineering",subtitle:"Cells and Biomaterials",isOpenForSubmission:!1,hash:"bb67e80e480c86bb8315458012d65686",slug:"regenerative-medicine-and-tissue-engineering-cells-and-biomaterials",bookSignature:"Daniel Eberli",coverURL:"https://cdn.intechopen.com/books/images_new/314.jpg",editedByType:"Edited by",editors:[{id:"6495",title:"Dr.",name:"Daniel",surname:"Eberli",slug:"daniel-eberli",fullName:"Daniel Eberli"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"57",title:"Physics and Applications of Graphene",subtitle:"Experiments",isOpenForSubmission:!1,hash:"0e6622a71cf4f02f45bfdd5691e1189a",slug:"physics-and-applications-of-graphene-experiments",bookSignature:"Sergey Mikhailov",coverURL:"https://cdn.intechopen.com/books/images_new/57.jpg",editedByType:"Edited by",editors:[{id:"16042",title:"Dr.",name:"Sergey",surname:"Mikhailov",slug:"sergey-mikhailov",fullName:"Sergey Mikhailov"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"2270",title:"Fourier Transform",subtitle:"Materials Analysis",isOpenForSubmission:!1,hash:"5e094b066da527193e878e160b4772af",slug:"fourier-transform-materials-analysis",bookSignature:"Salih Mohammed Salih",coverURL:"https://cdn.intechopen.com/books/images_new/2270.jpg",editedByType:"Edited by",editors:[{id:"111691",title:"Dr.Ing.",name:"Salih",surname:"Salih",slug:"salih-salih",fullName:"Salih Salih"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"872",title:"Organic Pollutants Ten Years After the Stockholm Convention",subtitle:"Environmental and Analytical Update",isOpenForSubmission:!1,hash:"f01dc7077e1d23f3d8f5454985cafa0a",slug:"organic-pollutants-ten-years-after-the-stockholm-convention-environmental-and-analytical-update",bookSignature:"Tomasz Puzyn and Aleksandra Mostrag-Szlichtyng",coverURL:"https://cdn.intechopen.com/books/images_new/872.jpg",editedByType:"Edited by",editors:[{id:"84887",title:"Dr.",name:"Tomasz",surname:"Puzyn",slug:"tomasz-puzyn",fullName:"Tomasz Puzyn"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},chapter:{item:{type:"chapter",id:"30073",title:"Airway Smooth Muscle: Is There a Phenotype Associated with Asthma?",doi:"10.5772/25582",slug:"airway-smooth-muscle-is-there-a-phenotype-associated-with-asthma-",body:null,keywords:null,chapterPDFUrl:"https://cdn.intechopen.com/pdfs/30073.pdf",chapterXML:null,downloadPdfUrl:"/chapter/pdf-download/30073",previewPdfUrl:"/chapter/pdf-preview/30073",totalDownloads:1860,totalViews:61,totalCrossrefCites:0,totalDimensionsCites:0,totalAltmetricsMentions:0,impactScore:0,impactScorePercentile:15,impactScoreQuartile:1,hasAltmetrics:0,dateSubmitted:"January 27th 2011",dateReviewed:"August 22nd 2011",datePrePublished:null,datePublished:"February 29th 2012",dateFinished:null,readingETA:"0",abstract:null,reviewType:"peer-reviewed",bibtexUrl:"/chapter/bibtex/30073",risUrl:"/chapter/ris/30073",book:{id:"566",slug:"bronchial-asthma-emerging-therapeutic-strategies"},signatures:"Gautam Damera and Reynold A. Panettieri, Jr.",authors:[{id:"63820",title:"Prof.",name:"Reynold",middleName:null,surname:"Panettieri Jr.",fullName:"Reynold Panettieri Jr.",slug:"reynold-panettieri-jr.",email:"rap@mail.med.upenn.edu",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",institution:{name:"University of Pennsylvania",institutionURL:null,country:{name:"United States of America"}}},{id:"126847",title:"Dr.",name:"Gautam",middleName:null,surname:"Damera",fullName:"Gautam Damera",slug:"gautam-damera",email:"gautam.damera@yahoo.com",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",institution:null}],sections:null,chapterReferences:null,footnotes:null,contributors:null,corrections:null},book:{id:"566",type:"book",title:"Bronchial Asthma",subtitle:"Emerging Therapeutic Strategies",fullTitle:"Bronchial Asthma - Emerging Therapeutic Strategies",slug:"bronchial-asthma-emerging-therapeutic-strategies",publishedDate:"February 29th 2012",bookSignature:"Elizabeth Sapey",coverURL:"https://cdn.intechopen.com/books/images_new/566.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",isbn:null,printIsbn:"978-953-51-0140-6",pdfIsbn:"978-953-51-6843-0",reviewType:"peer-reviewed",numberOfWosCitations:6,isAvailableForWebshopOrdering:!0,editors:[{id:"105946",title:"Dr.",name:"Elizabeth",middleName:null,surname:"Sapey",slug:"elizabeth-sapey",fullName:"Elizabeth Sapey"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"1047"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"30068",type:"chapter",title:"The Natural History of Asthma",slug:"the-natural-history-of-asthma",totalDownloads:2937,totalCrossrefCites:0,signatures:"Elizabeth Sapey and Duncan Wilson",reviewType:"peer-reviewed",authors:[{id:"105946",title:"Dr.",name:"Elizabeth",middleName:null,surname:"Sapey",fullName:"Elizabeth Sapey",slug:"elizabeth-sapey"}]},{id:"30069",type:"chapter",title:"Bronchial Challenge Testing",slug:"challenge-testing-in-the-diagnosis-of-asthma",totalDownloads:9270,totalCrossrefCites:1,signatures:"Lutz Beckert and Kate Jones",reviewType:"peer-reviewed",authors:[{id:"72797",title:"Prof.",name:"Lutz",middleName:null,surname:"Beckert",fullName:"Lutz Beckert",slug:"lutz-beckert"}]},{id:"30070",type:"chapter",title:"Determination of Biomarkers in Exhaled Breath Condensate: A Perspective Way in Bronchial Asthma Diagnostics",slug:"determination-of-biomarkers-in-exhaled-breath-condensate-a-perspective-way-in-bronchial-asthma-diagn",totalDownloads:2631,totalCrossrefCites:1,signatures:"Kamila Syslová, Petr Kačer, Marek Kuzma, Petr Novotný and Daniela Pelclová",reviewType:"peer-reviewed",authors:[{id:"73601",title:"Dr.",name:"Kamila",middleName:null,surname:"Syslová",fullName:"Kamila Syslová",slug:"kamila-syslova"},{id:"84645",title:"Prof.",name:"Marek",middleName:null,surname:"Kuzma",fullName:"Marek Kuzma",slug:"marek-kuzma"},{id:"84648",title:"Dr.",name:"Petr",middleName:null,surname:"Kačer",fullName:"Petr Kačer",slug:"petr-kacer"}]},{id:"30071",type:"chapter",title:"Immune Mechanisms of Childhood Asthma",slug:"immune-mechanisms-of-childhood-asthma",totalDownloads:2201,totalCrossrefCites:0,signatures:"T. Negoro, Y. Yamamoto, S. Shimizu, A. H. Banham, G. Roncador, H. Wakabayashi, T. Osabe, T. Yanai, H. Akiyama, K. Itabashi and Y. Nakano",reviewType:"peer-reviewed",authors:[{id:"77092",title:"Dr.",name:"Takaharu",middleName:null,surname:"Negoro",fullName:"Takaharu Negoro",slug:"takaharu-negoro"},{id:"77616",title:"Prof.",name:"Shunichi",middleName:null,surname:"Shimizu",fullName:"Shunichi Shimizu",slug:"shunichi-shimizu"},{id:"77617",title:"Dr.",name:"Yoshiki",middleName:null,surname:"Yamamoto",fullName:"Yoshiki Yamamoto",slug:"yoshiki-yamamoto"},{id:"77619",title:"Dr.",name:"Haruyo",middleName:null,surname:"Akiyama",fullName:"Haruyo Akiyama",slug:"haruyo-akiyama"},{id:"77620",title:"Prof.",name:"Yasuko",middleName:null,surname:"Nakano",fullName:"Yasuko Nakano",slug:"yasuko-nakano"},{id:"84137",title:"Prof.",name:"Alison",middleName:null,surname:"Banham",fullName:"Alison Banham",slug:"alison-banham"},{id:"84139",title:"Dr.",name:"Giovanna",middleName:null,surname:"Roncador",fullName:"Giovanna Roncador",slug:"giovanna-roncador"},{id:"121094",title:"MSc.",name:"Takako",middleName:null,surname:"Yanai",fullName:"Takako Yanai",slug:"takako-yanai"},{id:"121095",title:"MSc.",name:"Takahiro",middleName:null,surname:"Osabe",fullName:"Takahiro Osabe",slug:"takahiro-osabe"},{id:"121096",title:"MSc.",name:"Hitomi",middleName:null,surname:"Wakabayashi",fullName:"Hitomi Wakabayashi",slug:"hitomi-wakabayashi"},{id:"121223",title:"Prof.",name:"Kazuo",middleName:null,surname:"Itabashi",fullName:"Kazuo Itabashi",slug:"kazuo-itabashi"}]},{id:"30072",type:"chapter",title:"Allergic Asthma and Aging",slug:"allergic-asthma-and-aging",totalDownloads:2156,totalCrossrefCites:0,signatures:"Gabriele Di Lorenzo, Danilo Di Bona, Simona La Piana, Vito Ditta and Maria Stefania Leto-Barone",reviewType:"peer-reviewed",authors:[{id:"73451",title:"Prof.",name:"Gabriele",middleName:null,surname:"Di Lorenzo",fullName:"Gabriele Di Lorenzo",slug:"gabriele-di-lorenzo"},{id:"73514",title:"Dr.",name:"Danilo",middleName:null,surname:"Di Bona",fullName:"Danilo Di Bona",slug:"danilo-di-bona"},{id:"80806",title:"Dr.",name:"Maria Stefania",middleName:null,surname:"Leto Barone",fullName:"Maria Stefania Leto Barone",slug:"maria-stefania-leto-barone"},{id:"80819",title:"Dr.",name:"Simona",middleName:null,surname:"La Piana",fullName:"Simona La Piana",slug:"simona-la-piana"},{id:"80824",title:"Dr.",name:"Vito",middleName:null,surname:"Ditta",fullName:"Vito Ditta",slug:"vito-ditta"}]},{id:"30073",type:"chapter",title:"Airway Smooth Muscle: Is There a Phenotype Associated with Asthma?",slug:"airway-smooth-muscle-is-there-a-phenotype-associated-with-asthma-",totalDownloads:1860,totalCrossrefCites:0,signatures:"Gautam Damera and Reynold A. Panettieri, Jr.",reviewType:"peer-reviewed",authors:[{id:"63820",title:"Prof.",name:"Reynold",middleName:null,surname:"Panettieri Jr.",fullName:"Reynold Panettieri Jr.",slug:"reynold-panettieri-jr."},{id:"126847",title:"Dr.",name:"Gautam",middleName:null,surname:"Damera",fullName:"Gautam Damera",slug:"gautam-damera"}]},{id:"30074",type:"chapter",title:"Fluoride and Bronchial Smooth Muscle",slug:"fluoride-and-bronchial-smooth-muscle",totalDownloads:2309,totalCrossrefCites:0,signatures:"Fedoua Gandia, Sonia Rouatbi, Badreddine Sriha and Zouhair Tabka",reviewType:"peer-reviewed",authors:[{id:"75155",title:"Dr.",name:"Fedoua",middleName:null,surname:"Gandia",fullName:"Fedoua Gandia",slug:"fedoua-gandia"}]},{id:"30075",type:"chapter",title:"Management of Asthma in Children",slug:"asthma-management-in-children",totalDownloads:2563,totalCrossrefCites:0,signatures:"Abdulrahman Al Frayh",reviewType:"peer-reviewed",authors:[{id:"73676",title:"Prof.",name:"Abdulrahman",middleName:"Saleh",surname:"Al Frayh",fullName:"Abdulrahman Al Frayh",slug:"abdulrahman-al-frayh"}]},{id:"30076",type:"chapter",title:"Mechanisms of Reduced Glucocorticoid Sensitivity in Bronchial Asthma",slug:"reduced-glucocorticoid-sensitivity-in-severe-asthma",totalDownloads:1819,totalCrossrefCites:0,signatures:"Yasuhiro Matsumura",reviewType:"peer-reviewed",authors:[{id:"78286",title:"Dr.",name:"Yasuhiro",middleName:null,surname:"Matsumura",fullName:"Yasuhiro Matsumura",slug:"yasuhiro-matsumura"}]},{id:"30077",type:"chapter",title:"Antioxidant Strategies in the Treatment of Bronchial Asthma",slug:"antioxidant-strategies-in-the-treatment-of-bronchial-asthma",totalDownloads:2029,totalCrossrefCites:0,signatures:"Martin Joyce-Brady, William W. Cruikshank and Susan R. Doctrow",reviewType:"peer-reviewed",authors:[{id:"77068",title:"Dr.",name:"Martin",middleName:"Francis",surname:"Joyce-Brady",fullName:"Martin Joyce-Brady",slug:"martin-joyce-brady"},{id:"77530",title:"Prof.",name:"William",middleName:null,surname:"Cruikshank",fullName:"William Cruikshank",slug:"william-cruikshank"},{id:"83945",title:"Dr.",name:"Susan",middleName:null,surname:"Doctrow",fullName:"Susan Doctrow",slug:"susan-doctrow"}]},{id:"30078",type:"chapter",title:"Rehabilitation and Its Concern",slug:"rehabilitation-and-its-concerns",totalDownloads:1542,totalCrossrefCites:0,signatures:"Ganesan Kathiresan",reviewType:"peer-reviewed",authors:[{id:"72182",title:"Dr.",name:"Ganesan",middleName:null,surname:"Kathiresan",fullName:"Ganesan Kathiresan",slug:"ganesan-kathiresan"}]}]},relatedBooks:[{type:"book",id:"956",title:"Cystic Fibrosis",subtitle:"Renewed Hopes Through Research",isOpenForSubmission:!1,hash:"703f0969078948d82535b7b0c08ab613",slug:"cystic-fibrosis-renewed-hopes-through-research",bookSignature:"Dinesh Sriramulu",coverURL:"https://cdn.intechopen.com/books/images_new/956.jpg",editedByType:"Edited by",editors:[{id:"91317",title:"Dr.",name:"Dinesh",surname:"Sriramulu",slug:"dinesh-sriramulu",fullName:"Dinesh Sriramulu"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"34275",title:"The Prognosis of Cystic Fibrosis - A Clinician's Perspective",slug:"the-prognosis-of-cystic-fibrosis-a-clinician-s-perspective",signatures:"Patrick Lebecque",authors:[{id:"83586",title:"Prof.",name:"Patrick",middleName:null,surname:"Lebecque",fullName:"Patrick Lebecque",slug:"patrick-lebecque"}]},{id:"34276",title:"Radiological Features of Cystic Fibrosis",slug:"radiological-features-of-cystic-fibrosis",signatures:"Iara Maria Sequeiros and Nabil A. Jarad",authors:[{id:"78568",title:"Dr.",name:"Iara Maria",middleName:null,surname:"Sequeiros",fullName:"Iara Maria Sequeiros",slug:"iara-maria-sequeiros"},{id:"126865",title:"Dr.",name:"Nabil",middleName:null,surname:"Jarad",fullName:"Nabil Jarad",slug:"nabil-jarad"}]},{id:"34277",title:"The Cystic Fibrosis 'Gender Gap': Past Observations Present Understanding and Future Directions",slug:"the-cystic-fibrosis-gender-gap-past-observations-present-understanding-future-directions",signatures:"Sanjay H. Chotirmall, Catherine M. Greene, Brian J. Harvey and Noel G. McElvaney",authors:[{id:"39463",title:"Dr.",name:"Catherine",middleName:"M.",surname:"Greene",fullName:"Catherine Greene",slug:"catherine-greene"},{id:"42784",title:"Prof.",name:"Noel G.",middleName:null,surname:"McElvaney",fullName:"Noel G. McElvaney",slug:"noel-g.-mcelvaney"},{id:"81533",title:"Dr.",name:"Sanjay",middleName:"Haresh",surname:"Chotirmall",fullName:"Sanjay Chotirmall",slug:"sanjay-chotirmall"},{id:"128629",title:"Dr.",name:"Brian",middleName:null,surname:"Harvey",fullName:"Brian Harvey",slug:"brian-harvey"}]},{id:"34278",title:"Cystic Fibrosis and Infertility",slug:"cystic-fibrosis-and-infertility",signatures:"Maria do Carmo Pimentel Batitucci, Angela Maria Spagnol Perrone and Giselle Villa Flor Brunoro",authors:[{id:"91845",title:"Dr",name:null,middleName:null,surname:"Batitucci",fullName:"Batitucci",slug:"batitucci"},{id:"124309",title:"BSc.",name:"Ângela Maria Spagnol",middleName:null,surname:"Perrone",fullName:"Ângela Maria Spagnol Perrone",slug:"angela-maria-spagnol-perrone"},{id:"124310",title:"Dr.",name:"Giselle V.",middleName:null,surname:"Brunoro",fullName:"Giselle V. Brunoro",slug:"giselle-v.-brunoro"}]},{id:"34279",title:"The Genetics of CFTR: Genotype - Phenotype Relationship, Diagnostic Challenge and Therapeutic Implications",slug:"the-genetics-of-cftr-genotype-phenotype-relationship-diagnostic-challenge-and-therapeutic-implicatio",signatures:"Marco Lucarelli, Silvia Pierandrei, Sabina Maria Bruno and Roberto Strom",authors:[{id:"81744",title:"Prof.",name:"Marco",middleName:null,surname:"Lucarelli",fullName:"Marco Lucarelli",slug:"marco-lucarelli"},{id:"88095",title:"Dr.",name:"Silvia",middleName:null,surname:"Pierandrei",fullName:"Silvia Pierandrei",slug:"silvia-pierandrei"},{id:"88097",title:"Prof.",name:"Roberto",middleName:null,surname:"Strom",fullName:"Roberto Strom",slug:"roberto-strom"},{id:"124716",title:"Dr.",name:"Sabina Maria",middleName:null,surname:"Bruno",fullName:"Sabina Maria Bruno",slug:"sabina-maria-bruno"}]},{id:"34280",title:"Biochemical and Molecular Genetic Testing Used in the Diagnosis and Assessment of Cystic Fibrosis",slug:"biochemical-and-molecular-genetic-testing-used-in-the-diagnosis-and-assessment-of-cystic-fibrosis",signatures:"Donovan McGrowder",authors:[{id:"79123",title:"Dr.",name:"Donovan",middleName:null,surname:"McGrowder",fullName:"Donovan McGrowder",slug:"donovan-mcgrowder"}]},{id:"34281",title:"Pseudomonas aeruginosa Biofilm Formation in the CF Lung and Its Implications for Therapy",slug:"pseudomonas-aeruginosa-biofilm-formation-in-the-cf-lung-and-its-implications-for-therapy",signatures:"Gregory G. Anderson",authors:[{id:"82957",title:"Dr.",name:"Gregory",middleName:null,surname:"Anderson",fullName:"Gregory Anderson",slug:"gregory-anderson"}]},{id:"34282",title:"Outcome and Prevention of Pseudomonas aeruginosa-Staphylococcus aureus Interactions During Pulmonary Infections in Cystic Fibrosis",slug:"outcome-and-prevention-of-pseudomonas-aeruginosa-staphylococcus-aureus-interactions-during-pulmonary",signatures:"Gabriel Mitchell and François Malouin",authors:[{id:"87619",title:"Dr.",name:"Francois",middleName:null,surname:"Malouin",fullName:"Francois Malouin",slug:"francois-malouin"},{id:"89089",title:"Mr.",name:"Gabriel",middleName:null,surname:"Mitchell",fullName:"Gabriel Mitchell",slug:"gabriel-mitchell"}]},{id:"34283",title:"Infection by Non Tuberculous Mycobacteria in Cystic Fibrosis",slug:"infection-by-nontuberculous-mycobacteria-in-cystic-fibrosis",signatures:"María Santos, Ana Gil-Brusola and Pilar Morales",authors:[{id:"87481",title:"Dr.",name:"Pilar",middleName:null,surname:"Morales",fullName:"Pilar Morales",slug:"pilar-morales"}]},{id:"34284",title:"Atypical Bacteria in the CF Airways: Diversity, Clinical Consequences, Emergence and Adaptation",slug:"atypical-bacteria-in-the-cf-airways-diversity-clinical-consequences-emergence-and-adaptation",signatures:"Marchandin Hélène, Michon Anne-Laure and Jumas-Bilak Estelle",authors:[{id:"81613",title:"Prof.",name:"Hélène",middleName:null,surname:"Marchandin",fullName:"Hélène Marchandin",slug:"helene-marchandin"},{id:"88985",title:"Prof.",name:"Anne-Laure",middleName:null,surname:"Michon",fullName:"Anne-Laure Michon",slug:"anne-laure-michon"},{id:"88986",title:"Prof.",name:"Estelle",middleName:null,surname:"Jumas-Bilak",fullName:"Estelle Jumas-Bilak",slug:"estelle-jumas-bilak"}]},{id:"34285",title:"Viral Respiratory Tract Infections in Cystic Fibrosis",slug:"viral-respiratory-tract-infections-in-cystic-fibrosis",signatures:"Dennis Wat",authors:[{id:"92549",title:"Dr.",name:"Dennis",middleName:null,surname:"Wat",fullName:"Dennis Wat",slug:"dennis-wat"}]},{id:"34286",title:"Immune Dysfunction in Cystic Fibrosis",slug:"immune-response-in-cystic-fibrosis",signatures:"Yaqin Xu and Stefan Worgall",authors:[{id:"81718",title:"Prof.",name:"Stefan",middleName:null,surname:"Worgall",fullName:"Stefan Worgall",slug:"stefan-worgall"}]},{id:"34287",title:"Channel Replacement Therapy for Cystic Fibrosis",slug:"channel-replacement-therapy-for-cf",signatures:"John M. Tomich, Urška Bukovnik, Jammie Layman and Bruce D. Schultz",authors:[{id:"79549",title:"Prof.",name:"John M.",middleName:null,surname:"Tomich",fullName:"John M. Tomich",slug:"john-m.-tomich"}]},{id:"34288",title:"Improving Cell Surface Functional Expression of Delta F508 CFTR: A Quest for Therapeutic Targets",slug:"improving-cell-surface-functional-expression-of-deltaf508-cftr-a-quest-for-therapeutic-targets",signatures:"Yifei Fan, Yeshavanth K. Banasavadi-Siddegowda and Xiaodong Wang",authors:[{id:"88330",title:"Dr.",name:"Xiaodong",middleName:"Robert",surname:"Wang",fullName:"Xiaodong Wang",slug:"xiaodong-wang"},{id:"124468",title:"Dr.",name:"Yifei",middleName:null,surname:"Fan",fullName:"Yifei Fan",slug:"yifei-fan"},{id:"124470",title:"Dr.",name:"Yeshavanth",middleName:null,surname:"Banasavadi-Siddegowda",fullName:"Yeshavanth Banasavadi-Siddegowda",slug:"yeshavanth-banasavadi-siddegowda"}]},{id:"34289",title:"Fine Tuning of CFTR Traffic and Function by PDZ Scaffolding Proteins",slug:"fine-tuning-of-cftr-traffic-and-function-by-pdz-scaffolding-proteins",signatures:"Florian Bossard, Emilie Silantieff and Chantal Gauthier",authors:[{id:"87647",title:"Prof.",name:"Chantal",middleName:null,surname:"Gauthier",fullName:"Chantal Gauthier",slug:"chantal-gauthier"}]},{id:"34290",title:"CFTR Gene Transfer and Tracking the CFTR Protein in the Airway Epithelium",slug:"cftr-gene-transfer-and-tracking-the-cftr-protein-in-the-airway-epithelium",signatures:"Gaëlle Gonzalez, Pierre Boulanger and Saw-See Hong",authors:[{id:"84406",title:"Dr.",name:"Saw-See",middleName:null,surname:"Hong",fullName:"Saw-See Hong",slug:"saw-see-hong"},{id:"86153",title:"Prof.",name:"Pierre",middleName:null,surname:"Boulanger",fullName:"Pierre Boulanger",slug:"pierre-boulanger"},{id:"86155",title:"Dr.",name:"Gaëlle",middleName:null,surname:"Gonzalez",fullName:"Gaëlle Gonzalez",slug:"gaelle-gonzalez"}]},{id:"34291",title:"VIP as a Corrector of CFTR Trafficking and Membrane Stability",slug:"vasoative-intestinal-peptide-vip-as-a-corrector-of-cftr-trafficking-and-membrane-stability",signatures:"Valerie Chappe and Sami I. Said",authors:[{id:"84459",title:"Prof.",name:"Valerie",middleName:null,surname:"Chappe",fullName:"Valerie Chappe",slug:"valerie-chappe"},{id:"91057",title:"Prof.",name:"Sami",middleName:null,surname:"Said",fullName:"Sami Said",slug:"sami-said"}]},{id:"34292",title:"Pharmacological Potential of PDE5 Inhibitors for the Treatment of Cystic Fibrosis",slug:"pharmacological-potential-of-pde5-inhibitors-for-the-treatment-of-cystic-fibrosis",signatures:"Bob Lubamba, Barbara Dhooghe, Sabrina Noël and Teresinha Leal",authors:[{id:"88540",title:"Prof.",name:"Teresinha",middleName:null,surname:"Leal",fullName:"Teresinha Leal",slug:"teresinha-leal"},{id:"129673",title:"Dr.",name:"Bob",middleName:"Arthur",surname:"Lubamba",fullName:"Bob Lubamba",slug:"bob-lubamba"}]},{id:"34293",title:"Pharmacological Modulators of Sphingolipid Metabolism for the Treatment of Cystic Fibrosis Lung Inflammation",slug:"pharmacological-modulators-of-sphingolipid-metabolism-for-the-treatment-of-cystic-fibrosis-lung-infl",signatures:"M.C. Dechecchi, E. Nicolis, P. Mazzi, M. Paroni, F. Cioffi, A. Tamanini,V. Bezzerri, M. Tebon, I. Lampronti, S. Huang, L. Wiszniewski, M.T. Scupoli, A. Bragonzi, R. Gambari, G. Berton and G. Cabrini",authors:[{id:"53357",title:"Prof.",name:"Roberto",middleName:null,surname:"Gambari",fullName:"Roberto Gambari",slug:"roberto-gambari"},{id:"82889",title:"Dr.",name:"Song",middleName:null,surname:"Huang",fullName:"Song Huang",slug:"song-huang"},{id:"85366",title:"Dr.",name:"Maria Cristina",middleName:null,surname:"Dechecchi",fullName:"Maria Cristina Dechecchi",slug:"maria-cristina-dechecchi"},{id:"86524",title:"Dr.",name:"Elena",middleName:null,surname:"Nicolis",fullName:"Elena Nicolis",slug:"elena-nicolis"},{id:"86525",title:"Dr.",name:"Paola",middleName:null,surname:"Mazzi",fullName:"Paola Mazzi",slug:"paola-mazzi"},{id:"86527",title:"Dr.",name:"Moira",middleName:null,surname:"Paroni",fullName:"Moira Paroni",slug:"moira-paroni"},{id:"86528",title:"Dr.",name:"Federica",middleName:null,surname:"Cioffi",fullName:"Federica Cioffi",slug:"federica-cioffi"},{id:"86529",title:"Dr.",name:"Valentino",middleName:null,surname:"Bezzerri",fullName:"Valentino Bezzerri",slug:"valentino-bezzerri"},{id:"86531",title:"Dr.",name:"Maela",middleName:null,surname:"Tebon",fullName:"Maela Tebon",slug:"maela-tebon"},{id:"86536",title:"Dr.",name:"Ilaria",middleName:null,surname:"Lampronti",fullName:"Ilaria Lampronti",slug:"ilaria-lampronti"},{id:"86540",title:"Dr.",name:"Ludovic",middleName:null,surname:"Wiszniewski",fullName:"Ludovic Wiszniewski",slug:"ludovic-wiszniewski"},{id:"86541",title:"Dr.",name:"Maria Teresa",middleName:null,surname:"Scupoli",fullName:"Maria Teresa Scupoli",slug:"maria-teresa-scupoli"},{id:"86543",title:"Prof.",name:"Alessandra",middleName:null,surname:"Bragonzi",fullName:"Alessandra Bragonzi",slug:"alessandra-bragonzi"},{id:"86544",title:"Prof.",name:"Giorgio",middleName:null,surname:"Berton",fullName:"Giorgio Berton",slug:"giorgio-berton"},{id:"86546",title:"Dr.",name:"Giulio",middleName:null,surname:"Cabrini",fullName:"Giulio Cabrini",slug:"giulio-cabrini"}]},{id:"34294",title:"The Importance of Adherence and Compliance with Treatment in Cystic Fibrosis",slug:"the-importance-of-adherence-and-compliance-with-treatment-in-cystic-fibrosis",signatures:"Rosa Patricia Arias-Llorente, Carlos Bousoño García and Juan J. Díaz Martín",authors:[{id:"81752",title:"Dr.",name:"Rosa Patricia",middleName:null,surname:"Arias Llorente",fullName:"Rosa Patricia Arias Llorente",slug:"rosa-patricia-arias-llorente"},{id:"88980",title:"Prof.",name:"Carlos",middleName:"GarcÃa",surname:"Bousoño",fullName:"Carlos Bousoño",slug:"carlos-bousono"}]},{id:"34295",title:"Improving the Likelihood of Success in Trials and the Efficiency of Delivery of Mucolytics and Antibiotics",slug:"improving-the-likelihood-of-success-in-trials-and-efficiency-of-delivery-of-mucolytics-and-antibioti",signatures:"Carlos F. Lange",authors:[{id:"87618",title:"Prof.",name:"Carlos",middleName:"Frederico",surname:"Lange",fullName:"Carlos Lange",slug:"carlos-lange"}]},{id:"34296",title:"Airways Clearance Techniques in Cystic Fibrosis: Physiology, Devices and the Future",slug:"airway-clearance-techniques-in-cystic-fibrosis-physiology-devices-and-the-future",signatures:"Adrian H. Kendrick",authors:[{id:"81571",title:"Dr.",name:"Adrian",middleName:"H.",surname:"Kendrick",fullName:"Adrian Kendrick",slug:"adrian-kendrick"}]},{id:"34297",title:"The Physiotherapist's Use of Exercise in the Management of Young People with Cystic Fibrosis",slug:"the-physiotherapist-s-use-of-exercise-in-the-management-of-young-people-with-cystic-fibrosis",signatures:"Allison Mandrusiak and Pauline Watter",authors:[{id:"84089",title:"Dr.",name:"Allison",middleName:null,surname:"Mandrusiak",fullName:"Allison Mandrusiak",slug:"allison-mandrusiak"},{id:"87978",title:"Dr.",name:"Pauline",middleName:null,surname:"Watter",fullName:"Pauline Watter",slug:"pauline-watter"}]},{id:"34298",title:"Exercise Performance and Breathing Patterns in Cystic Fibrosis",slug:"exercise-performance-and-breathing-patterns-in-cystic-fibrosis",signatures:"Georgia Perpati",authors:[{id:"79721",title:"Dr.",name:"Georgia",middleName:null,surname:"Perpati",fullName:"Georgia Perpati",slug:"georgia-perpati"}]}]}],publishedBooks:[{type:"book",id:"680",title:"Emphysema",subtitle:null,isOpenForSubmission:!1,hash:"e010b49904cb054c80b3965263fa1ce6",slug:"emphysema",bookSignature:"Ravi Mahadeva",coverURL:"https://cdn.intechopen.com/books/images_new/680.jpg",editedByType:"Edited by",editors:[{id:"87162",title:"Dr.",name:"Ravi",surname:"Mahadeva",slug:"ravi-mahadeva",fullName:"Ravi Mahadeva"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7155",title:"Diseases of Pleura",subtitle:null,isOpenForSubmission:!1,hash:"0c5e2d001498cc246b2c2e335e71b3dc",slug:"diseases-of-pleura",bookSignature:"Jelena Stojšić",coverURL:"https://cdn.intechopen.com/books/images_new/7155.jpg",editedByType:"Edited by",editors:[{id:"192769",title:"Ph.D.",name:"Jelena",surname:"Stojšić",slug:"jelena-stojsic",fullName:"Jelena Stojšić"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"783",title:"Pulmonary Hypertension",subtitle:"From Bench Research to Clinical Challenges",isOpenForSubmission:!1,hash:"488ca2b21e4374b6337d1aacbd107c3b",slug:"pulmonary-hypertension-from-bench-research-to-clinical-challenges",bookSignature:"Roxana Sulica and Ioana Preston",coverURL:"https://cdn.intechopen.com/books/images_new/783.jpg",editedByType:"Edited by",editors:[{id:"74136",title:"Dr.",name:"Roxana",surname:"Sulica",slug:"roxana-sulica",fullName:"Roxana Sulica"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7872",title:"Cystic Fibrosis",subtitle:"Heterogeneity and Personalized Treatment",isOpenForSubmission:!1,hash:"5e2772740d2d4ebda048e06f2eee0b94",slug:"cystic-fibrosis-heterogeneity-and-personalized-treatment",bookSignature:"Dennis Wat and Dilip Nazareth",coverURL:"https://cdn.intechopen.com/books/images_new/7872.jpg",editedByType:"Edited by",editors:[{id:"92549",title:"Dr.",name:"Dennis",surname:"Wat",slug:"dennis-wat",fullName:"Dennis Wat"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"956",title:"Cystic Fibrosis",subtitle:"Renewed Hopes Through Research",isOpenForSubmission:!1,hash:"703f0969078948d82535b7b0c08ab613",slug:"cystic-fibrosis-renewed-hopes-through-research",bookSignature:"Dinesh Sriramulu",coverURL:"https://cdn.intechopen.com/books/images_new/956.jpg",editedByType:"Edited by",editors:[{id:"91317",title:"Dr.",name:"Dinesh",surname:"Sriramulu",slug:"dinesh-sriramulu",fullName:"Dinesh Sriramulu"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],publishedBooksByAuthor:[{type:"book",id:"566",title:"Bronchial Asthma",subtitle:"Emerging Therapeutic Strategies",isOpenForSubmission:!1,hash:"68d000bac8eef40a99c96dc2c7990892",slug:"bronchial-asthma-emerging-therapeutic-strategies",bookSignature:"Elizabeth Sapey",coverURL:"https://cdn.intechopen.com/books/images_new/566.jpg",editedByType:"Edited by",editors:[{id:"105946",title:"Dr.",name:"Elizabeth",surname:"Sapey",slug:"elizabeth-sapey",fullName:"Elizabeth Sapey"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},onlineFirst:{chapter:{type:"chapter",id:"72519",title:"Hemostasis and Biosurgicals in Trauma and Orthopedic Surgery",doi:"10.5772/intechopen.92805",slug:"hemostasis-and-biosurgicals-in-trauma-and-orthopedic-surgery",body:'There are a number of factors that influence patient outcome in trauma and orthopedic surgery in relation to hemorrhage. These can include patient factors, for example anticoagulant and antiplatelet medications, coagulopathies and other conditions, as well as surgical factors such as bony bleeding, large surgical incisions, diffuse venous bleeding and unseen sources of bleeding [1, 2].
Trauma still remains a leading worldwide cause of morbidity and mortality [3] and despite various developments over the years, hemorrhagic shock from trauma continues to form one part of the terrible triad contributing to mortality in both the military and civilian settings [4].
Effective hemostasis during surgery is advantageous to the surgeon as it prevents diffuse bleeding from capillaries and venules obscuring the surgical field and adding to operation time and infection risk [5, 6].
Significant blood loss has been associated with increased need for allogeneic and autologous blood transfusion [2, 7, 8]. These are associated with attendant risks including nosocomial infections [9], transfusion-related injury and fluid overload [10, 11]. In fact blood transfusion is an independent risk factor for infection, respiratory complications and the need for critical care support in traumatic injuries and resulted in a twofold increase in complications and critical care admissions, with more than two units of blood transfusion [7]. The risk of major perioperative complications is also increased with high intraoperative blood loss [2, 12, 13]. Therefore, patient outcome is optimal when the balance between bleeding and clotting is maintained during surgery such that tissue perfusion is adequate without excessive blood loss [5, 6].
Hemostasis in regard to trauma and surgery is a highly regulated process, maintaining flow through vessels at the same time as the thrombotic response to tissue damage is occurring [14], thereby ensuring tissue perfusion and limiting blood loss. The process is a complex interaction between vascular endothelium, platelets, the coagulation and fibrinolytic systems [15, 16].
Following injury, a temporary vascular smooth muscle contraction occurs in an attempt to stem blood flow. Endothelial disruption exposes the subendothelial layer and circulating Von Willebrand factor attaches to the site of injury. Surface glycoproteins also adhere to platelet surfaces. The subendothelial collagen activates adhering platelets and their surface receptors then bind circulating fibrinogen, forming a soft platelet plug comprising aggregated platelets and fibrinogen [14]. The adhering platelets secrete humoral factors including serotonin, prostaglandins and thromboxane that maintain a reduced blood flow, creating an environment that is conducive to clot formation at the site of bleeding. At the same time, circulating coagulating factors produced by the liver are activated in a series of precisely controlled sequential and dependant reactions [14, 17].
The final common pathway is the activation of thrombin that leads to conversion of soluble plasma fibrinogen to insoluble fibrin. The complex of activated factor XIII and fibrin results in cross-linking of fibrin monomers to form a stable clot [17].
Broadly speaking, there are mechanical, thermal, pharmacological and topical methods of hemorrhage control [2, 6, 8, 17, 18, 19, 20].
Mechanical methods include direct pressure, ligating clips and staples, sutures, fabric pads and gauze while hemostatic scalpels and lasers also reduce bleeding during surgery [6, 7, 17]. However, these methods have their drawbacks with respect to certain situations. The location of bleeding is particularly important with respect to orthopedics and in particular trauma. Bony surface bleeding and bleeding from the intramedullary canals are almost impossible to control with mechanical methods. Inflamed or friable tissues may contain a dense network of friable capillaries may prove a challenge [1, 2, 7]. Junctional bleeding in trauma may be potentially catastrophic and its control may not be amenable to the above methods.
The use of pharmacological methods can be a useful adjunct to other methods in these circumstances [7]. These may include epinephrine, desmopressin, tranexamic acid, vitamin K, aminocaproic acid and others.
In some situations though, even the above methods are ineffective or impractical [15] and hence the development of topical hemostatic agents. These are a diverse group of agents of varying composition and mechanisms of action. They can be versatile in the sense that when blood loss is minimal, they can be used sparingly and when there is severe blood loss then more liberal application could be an option [2]. They may be applied directly to the bleeding site and prevent or reduce continuous and unrelenting bleeding intraoperatively and postoperatively [2] and their topical nature broadly avoids the systemic adverse effects associated with systemic hemostatic medications including thrombosis [8].
Topical hemostasis is defined as a process that acts locally to stop bleeding from damaged vessels [21]. Recent and continuing developments have focused on agents that can be used as adjuncts to control bleeding during surgical procedures and control residual problematic bleeding if conventional methods fail. Broadly speaking, topical hemostats can be divided into three types [17, 20].
Passive—where the mechanism of action is to provide a physical scaffold around which platelets can aggregate. These act through contact activation and promote platelet aggregation so a clot can form. Examples include collagen, cellulose and gelatins.
Active—these have biological activity and their mechanism of action is actively influencing the clotting cascade to promote clot formation [17, 20]. These usually contain thrombin in one form or another [14].
Combined—combination of passive product with thrombin.
Contact activation occurs between receptors on platelets and collagen, promoting platelet aggregation [15, 17]. Preparation includes collagen sponges, pastes and powders [15, 17] and is obtained mainly from bovine sources [15], making it potentially immunogenic. In fact a 2–4% allergy in the total population to bovine collagen has been reported in the literature [22] (Table 1).
Hemostatic agent | Examples | Manufacturer |
---|---|---|
Collagen-based products | Avitene | Davol/BD BARD |
Helistat/Helitene | Integra Lifesciences | |
Instat/Ultrafoam | Ethicon, Johnson & Johnson | |
Oxidized cellulose | Surgicel Fibrillar | Ethicon, Johnson & Johnson |
Surgicel Nu-Knit | Ethicon, Johnson & Johnson | |
Gelatin-based products | Gelfoam | Pharmacia Corp, Pfizer |
Surgifoam | Johnson & Johnson | |
Polysaccharide spheres | Arista AH | BD BARD |
Passive hemostats.
The active ingredient in this product is oxidized regenerated cellulose (ORC). Its exact mechanism of action is poorly understood but contact activation is thought to play a part [15]. Often at reoperation, previously used ORC is visible, indicating reduced absorption and poor biodegradability, although this may be related to the amount used and the site of implantation [8]. For this reason, only the minimum possible amount to be used is indicated and it is recommended that the product be removed once hemostasis is achieved and before definitive closure [6, 8].
Their mechanism of action involves swelling while in contact with blood, providing a tamponade effect in confined spaces and restoring blood flow, and thereby producing a stable scaffold around which clots can form [17]. This does make it suitable for irregular wounds [6] and confined spaces [17]. However, it tends to stick to instruments when soaked with blood, making it difficult to handle and does not form a tight bond with the bleeding surface and can hence easily be dislodged [17].
Active agents have biological activity and actively participate in the coagulation cascade to induce clot formation at the site of bleeding [20]. They include thrombin, which comes into play in the last stages of the clotting cascade, converting circulating fibrinogen to a fibrin clot [17, 23]. Hence a significant advantage of thrombin is that its action is less susceptible to coagulopathies caused by clotting factor or platelet dysfunction [17]. Its activity constitutes the final steps in the clotting cascade and therefore it bypasses the initial steps in the cascade. Therefore, other aspects of the clotting cascade can be dysfunctional without significantly impairing the local hemostatic activity of thrombin [20].
Thrombin-based products are therefore excellent adjuncts in the presence of congenital and acquired coagulation and platelet disorders and in the presence of pharmacological and antiplatelet agents that are increasingly being used in the general population [5, 17]. Circulating fibrinogen is necessary for hemostasis to occur by active agents as thrombin converts it into insoluble fibrin that forms part of the clot. Therefore in rare cases of fibrinogen deficiency, clotting by thrombin-based products is impaired [17, 23].
These accomplish their action by bypassing the coagulation cascade to the final steps and converting fibrinogen to fibrin [24]. A fibrin precursor and thrombin stored in two separate adjacent syringes (dual syringe kit) with a single lumen enables delivery and mixing of these agents in the lumen and onto the surgical site, causing thrombin to cleave the fibrin precursor, resulting in fibrin monomers that polymerize at the site into a soluble mesh stabilized into a stable clot by factor XIII at the tissue surface [25]. Previously, bovine thrombin was used, which has recently been replaced by human thrombin [26] and more recently autologous human thrombin. Autologous fibrin sealants overcome the risk of allogeneic blood products, for example one is a patient-derived fibrin sealant utilizing the patient’s own blood as a source of fibrinogen and prothrombin and mixing it with an alkaline buffer solution to lower the pH, activating endogenous prothrombin [24] (Table 2).
Biosurgical | Examples | Manufacturer |
---|---|---|
Liquid fibrin adhesives | Tiseel | Baxter |
Evicel | Ethicon, Johnson & Johnson | |
Crosseal | Ethicon, Johnson & Johnson | |
Floseal | Baxter | |
Fibrin patches | Tachosil | Takeda |
Platelet gels | Vitagel | Orthovita |
Glutaraldehyde cross-linked albumin | BioGlue | Cryolife |
Sealants and adhesives.
These are a combination of thrombin, calcium and platelet-rich plasma, usually obtained from autologous sources using centrifugation systems that produce platelet-rich plasma. Platelets provide growth factors to stimulate wound healing and contribute to the strength of the clot [27].
These systems however rely on an intact coagulation system and may not be as effective in patients on antiplatelet or anticoagulant medications [27]. Also the extraction systems are expensive and there is a risk of contamination.
In addition to not requiring normal clotting mechanisms to work as mentioned before, active hemostats may offer other advantages. With many passive hemostatic agents, degeneration and reabsorption are a problem. This necessitates their removal from the surgical site prior to closure. With thrombin, this is not the case as degeneration and resorption of the resulting fibrin clot is achieved as part of wound healing [1, 8]. Thrombin and combination products also have a rapid onset of action with hemostasis being achieved within 10 min in most patients [7, 17, 28, 29]. Studies have shown that combining an active hemostat within a hemostatic product accelerates clotting. In a comparison of collagen-based products at different bleeding sites after surgical tumor resection, the combination of a collagen-thrombin product (n = 23) achieved complete hemostasis three times faster than the collagen sponge alone (n = 30). The median time to hemostasis was 78 seconds versus 243 seconds respectively (p < 0.001) [30]. Furthermore, approximately 80% achieved complete hemostasis within 2 min with an active topical hemostatic agent compared with only one-third of patients receiving a passive topical hemostatic agent [31]. Active hemostats are also very versatile and can come in various forms. These include sprays that can be advantageous in covering large bleeding surfaces quickly without the need for tamponade [31], and the concentration of thrombin in the formulation can also be varied depending on the severity and type of bleeding. Surgeons can use them in multiple ways during a single procedure due to their flexibility and range of delivery options [20]. Although bovine sources of thrombin may induce antibodies in hosts, this has not manifest itself as a major problem in the clinical setting [1, 32].
It has been shown that the terrible triad of hypothermia, coagulopathy and acidosis are associated with increased mortality in multiple trauma patients and that infection and multiple organ failure are other potential complications arising from severe blood loss [33, 34]. About a quarter of patients presenting to trauma centers have an established coagulopathy secondary to hemorrhage [35] with attendant risks of significant complications. Multiple defects in hemostasis can occur in combat injuries and as such, conventional methods of hemostasis may not be possible. Time is of the essence in these situations and non-transfusional approaches to hemostasis and the use of biosurgicals may be indicated [36, 37, 38, 39].
The combat setting has proved a challenging environment in many different ways in terms of management of hemorrhage. The tissue available for controlling life-threatening hemorrhage may be limited, the wound severity and the possibility of multiple injuries make the situation uniquely challenging [40]. Most combat injuries are penetrating in nature and a large proportion are limb wounds. Mortality from hemorrhage from these kinds of wounds is potentially preventable [36, 41, 42].
In the combat setting, the three principal sites of lethal hemorrhage are truncal (67%), junctional (19%) and extremity (14%). A report from the National Trauma Database suggests that the mortality from isolated lower limb extremity trauma with arterial injury is 2.8% with a 6.6% amputation rate [38]. Tourniquets can be used for these isolated injuries and their use in the military and civilian setting is supported by the Hartford consensus [39] and by the American College of Surgeons Committee on Trauma [38].
Junctional injuries (neck, axilla, groin and perineum) form a significant proportion of trauma in a combat setting and may damage the large vascular structures. These types of injuries are difficult to compress and are not amenable to tourniquet control [43, 44]. Topical hemostatic agents that have been developed in the last two decades [36, 45] can play a vital role in controlling severe bleeding in these situations and increase survival [33, 46] and have thus been listed as optional basic equipment for ambulances [39]. In addition, in a combat setting, more complex types of wound patterns are encountered than in a civilian setting, including blast injuries, which may be more amenable to topical hemostasis.
In 2003, USAIR [47] introduced guidelines of what should constitute the perfect hemostatic agent for use in the prehospital and battlefield settings [33, 41, 47, 48, 49] that included the following: being able to stop large vessel and arterial bleeding within 2 min of application, ability to be delivered through a pool of blood when applied, ready to use with no need for on-site preparation, simple enough to use by the wounded victim or a paramedic with minimal training, light weight and durable with a minimum 2-year shelf life in extreme environmental conditions, safe to use with no risk of injury to tissues or transmission of infection and inexpensive [41, 45, 50, 51]. In addition, hemostatic dressings need to be conformable and flexible enough due to the irregular shape, depth and wound configurations caused by modern explosive devices [40, 48].
These include gelatin [52], oxidized cellulose [53] and collagen and plant-derived polysaccharide spheres [54]. These agents are not biologically active and rely on the patients’ endogenous fibrin production for hemostasis. They provide a scaffold for platelet activation and aggregation, absorbing fluid several times their own weight to form a matrix at the site of hemorrhage, activating the extrinsic coagulation pathway and allowing clotting to occur. This makes them suitable only for patients in whom the coagulation system is intact [55, 56]. In fact in the absence of some coagulation factors, these agents may not be effective [53, 56]. They can be used as first line due to their ready availability and favorable cost-effectiveness, mostly as adjuncts with direct pressure at bleeding sites to control minimal residual hemorrhage [56].
These agents act by forming a physical matrix that stimulates platelet aggregation and degranulation to release factors that encourage clot formation [55].
Cellulose is a homopolysaccharide made by polymerization of glucopyranose molecules through glucosidic bonds. Surgical oxidized cellulose is either regenerated where organized fibers are formed prior to oxidation (regenerated ORC), or non-regenerated, with unorganized fibers prior to oxidation [55]. ORC conforms more rapidly to the surrounding environment. Surgical oxidized cellulose offers several favorable properties in hemostasis including bactericidal activity, good biocompatibility and ease of use [55]. It is usually resorbed but can take anywhere between 2 and 6 weeks depending on the amount used, the degree of saturation with blood and the tissue bed. The excess material may also cause foreign body reactions and granuloma formation without biodegradation and complicate radiological and clinical diagnoses of abscess, residual or recurrent tumor and granuloma [55, 57, 58]. For this reason, the minimal effective amount should be used and excess material removed prior to definitive closure. In addition, these products should not be used or left in place close to nerves, ureters, intestinal and vascular structures due to the risk of local inflammatory reactions and ischemia [55].
These can be used in combination with active agents such as thrombin in adhesives, or in a stand-alone manner. They are usually of bovine or porcine origin and act at the terminal stages of clotting to facilitate fibrin clot formation and are highly absorptive, forming a mechanical matrix for the clot to adhere to [55, 59]. They are quite versatile and available as sponges, powders or granules and are usually completely resorbed in 4–6 weeks [59]. It is important to use the minimum amount necessary to achieve hemostasis and to remove excess because part of the mechanism of action is swelling to cause a tamponade effect and this could potentially cause compression and necrosis in surrounding tissues if packed in tight spaces. This is particularly important around neural tissue and in bony spaces [59]. They are also useful in irregular wounds and surgical cavities as they can expand and fill these irregular spaces.
Mucoporous polysaccharide hemispheres are among a relatively new class of hemostatic agents derived from plant starch. Their mechanism of action includes absorbing water and the low-molecular weight components of blood, hence concentrating platelets and clotting factors in the vicinity, thereby enhancing local clotting processes [58, 60]. They have been used safely in cardiothoracic and neurospinal surgery.
These are active formulations containing mostly two agents—human purified fibrinogen and thrombin. They may also have added other compounds such as factor XIII, fibronectin and antifibrinolytics such as aprotinin used previously and tranexamic acid currently [61]. However, formulations without tranexamic acid or aprotinin are available to avoid hypersensitivity associated with aprotinin and neurotoxicity associated with tranexamic acid [62, 63] (Table 2).
These products are available in liquid or low-viscosity forms (fibrin glues) or as part of stiff collagen fleece (fibrin patches) [55]. Once applied, their mechanism of action is cleavage of fibrinogen to fibrin monomers by thrombin, which also activates factor XIII and the complex fibrin matrix forms the clot [55]. Calcium is required in both these steps and then the clot is eventually resorbed via the fibrinolytic pathway [25]. Generally, they connect atraumatically to tissues and form a barrier to leakage and bleeding through covalent polymerization between themselves and adjacent tissue [55]. Chiara et al. set out the properties of an sealant as being strong, rapid to adhere, flexible, sterile, without toxicity, biologically inert, biocompatible and able to be used in relatively wet environments with low thrombogenicity [55].
True sealants are of two types: synthetic (PEG-based or cyanoacrylates) [53, 60, 64, 65, 66, 67] or semisynthetic glutaraldehyde [68] (Table 2).
True sealants are cross-linking sealants that polymerize through nonenzymatic reactions, free of the need for the presence of blood or coagulation factors although some do have some coagulation factors within them. Both can be used to control residual ooze [53, 67].
PEG sealants are composed of polyethylene glycol and come in both flowing form as well as pads or fleeces. They should be avoided in kidney disease due to the renal clearance of polyethylene glycol and may contain allergenic components such as human albumin that can also lead to the theoretical risk of disease transmission [55].
Cyanoacrylates are products generally used for skin closure or lacerations in areas of low skin tension, for example scalp wounds. They are synthetic sealants that rapidly polymerize with water acting as the catalyst. There are two formulations: octyl-2-cyanocrylate and N-Butyl-2-cyanoacrylate. In a systematic review looking at octyl-2-cyanoacrylate, there were no differences in infections, wound dehiscence or cosmetic appearance when compared with other methods of closure [65]. Polymerization generates heat and therefore the amount used should be just enough and should certainly be avoided in delicate areas such as the spinal canal and neural tissue [55, 65]. Below the skin, a foreign body reaction may occur [65] and intravascular use is contraindicated due to the risk of systemic embolization [55].
Semisynthetic sealants otherwise known as bioglues are compounds of semisynthetic glutaraldehyde—bovine albumin-based sealant. Proteins on the surface of bleeding human tissue link with those of bovine albumin in the bioglue, causing a sealant effect [55]. Within synthetic graft materials, bioglue permeates interstices within the graft matrix [69], making it suitable for sealing anastomotic sites and decreasing postop bleeding [70].
These can be used as an adjunct to surgical hemostasis to improve residual moderate bleeding [55]. They are usually applied by double syringe systems. Each component is located in a separate section of the syringe, which then combine in a single lumen. They subsequently are applied using a blunt needle or spray tips in cases of large bleeding surface areas to the bleeding surgical site [25, 61]. Since the components bypass the initial steps in the extrinsic coagulation pathway, they can be used in achieving hemostasis in patients with congenital or acquired bleeding disorders such as hemophilia and patients on anticoagulants or antiplatelet medications [25, 62, 71] (Table 2).
They do have some drawbacks including the risk of thrombosis if injected intravascularly, hypotension and death and the risk of air embolization with the use of gas-driven sprayers [55]. In addition, the cost of sealants is significant and hence they are not recommended for use except in particular situations where indicated, for example in those with coagulation disorders [61]. One cost-effectiveness analysis done in the United Kingdom in patients undergoing total knee replacement on Quixil, one of the commercial brands, in addition to conventional hemostatic agents estimated that the use of a 5-ml dose of Quixil in addition to conventional hemostatic methods was cost saving in comparison to conventional methods alone. But the use of a 10-ml dose increased the cost substantially and they recommended that liquid fibrin adhesives only be used in selected cases [25]. They have however been found to be effective. Echave et al. [59] carried out a systematic review of 27 studies on the effectiveness of human gelatin-thrombin matrix sealant in different surgical fields including orthopedics. All 27 studies demonstrated that this sealant was associated with a significantly higher rate of successful hemostasis, and a shorter time to achieve it (p < 0.001) in comparison to other alternatives when conventional methods failed.
These products are also available as patches, for example Tachosil. They may have slightly different components but all of them have essentially the same mechanism of action, offering mechanical support with either collagen, oxidized cellulose/polyglactin 910 matrix, binding coagulation factors, allowing better adherence to bleeding tissue even in the presence of brisk bleeding, preventing the so-called “streaming effect” observed with fluid adhesives [72, 73, 74]. Tachosil is a ready-to-use fixed combination of equine collagen patch on one side and coated with coagulation factors, human fibrinogen and human thrombin on the other side [55]. Fibrin-pad and PGA-felt are absorbable hemostats composed of polyglactin 910, oxidized regenerated cellulose, thrombin and fibrinogen shown to be effective in a variety of tissue types [25, 72] and can rapidly achieve hemostasis in brisk bleeding in the retroperitoneum and pelvis, compared with the standard of care [72, 73] (Table 2).
Junctional hemorrhage is a significant problem in major trauma especially on the battlefield and often conventional methods such as tourniquets are ineffective [55]. In this respect, science has led to the development of products that are effective options in these circumstances and they can be divided into factor concentrators [75], procoagulants [76] and mucoadhesives [77] (Table 3).
Biosurgical | Examples | Manufacturer |
---|---|---|
Zeolite dressings | QuikClot & QuikClot ACS | Z-Medica |
Smectite dressings | WoundStat | TraumaCure Inc. |
Kaolin dressings | QuikClot Combat Gauze | Z-Medica |
Rapid Deployment Hemostat | Marine Polymer Technologies | |
Celox | Med Trade Products, UK | |
Trauma Stat | OreMedix | |
Fibrin dressings | Dry fibrin sealant dressing (DFSD) | American Red Cross |
Hemostatic dressings.
These are compounds of either zeolite (microporous crystalline aluminum silicate) or smectite (a nonmetallic clay mineral sodium, calcium and aluminum silicate). Examples include QuikClot (Z-Medica LLC, CT,USA) and QuikClot ACS (advanced clotting sponge), Traumadex (Medafor Inc., MN, USA) and self-expanding hemostatic polymer (SEHP) [35]. As the group name suggests these agents rapidly absorb the fluid content of blood. The resulting effect is an increase in relative concentration of its cellular and protein content and therefore clot formation. Water molecules are held in its pores by hydrogen bonds and this results in a relative local increase in concentration of platelets and clotting factors [35]. The first generation of QuikClot was designed as granules that were poured onto the bleeding wound. A high efficiency rate of 92% was demonstrated in a series of 103 patients in the military and civilian setting. There were eight patients in which hemorrhage was not effectively controlled with QC in coagulopathic patients where it was used as a last resort [75]. There were also some side effects of QC including intense exothermic reaction and scar formation from foreign body reaction [75]. Animal and early human studies on QC revealed thermal injury, poor biodegradability and foreign body reactions as the main drawbacks of QC [78, 79, 80]. In fact temperature generated by QuikClot in contact with aqueous components of blood at bleeding wounds has been measured to reach and average of 61°C with a potential rise to 76°C [78].
QuikClot has been compared to other hemostatic agents including HemCon (HemCon Medical Technologies Inc., OR, USA) in a military setting in multiple patients injured after explosions and gunshot wounds [81]. In this study, QC was effective but thermal injury was an issue. This has also been investigated in other studies by McMannus et al. [82] in the combat setting and evidence suggests that the greater the amount of blood and the more the QC applied, the greater is the risk of thermal injury. Thus currently it is only recommended for external use and the minimum amount required to achieve effective hemostasis is recommended.
QuikClot ACS is a newer generation of product made by larger zeolite beads packaged into mesh bags. This makes it easier to pack into cavities and irregular wounds often found on the battlefield and at junctional sites of hemorrhage and in cavities [55] and is claimed to produce much less of an exothermic reaction [75, 78] although there is a lack of studies with sufficient numbers to confirm this unequivocally [41].
Self-expanding hemostatic polymer (SEHP) is a dual action factor concentrator. Its mechanism of action results from its extremely potent absorptive capacity following absorption of the fluid component of blood and its ability to expand to conform to large irregular cavities and spaces, exerting a tamponade effect [35]. The other action is the effect of the polymer absorbing the liquid phase of blood into its matrix, thereby leading to a relative increase in concentration of platelets and coagulation factors at the site of bleeding, thereby promoting clotting [83, 84].
Woundstat is a compound of smectite granules that come in granular form. Its mechanism of action is absorption of the aqueous phase of blood, forming a clay substance that adheres to bleeding tissue and acts as a sealant and also concentrates clotting factors and blood cells locally, contributing to hemostasis. Granules are negatively charged and activate the intrinsic pathway as well [85, 86, 87].
These are products where the basic component is chitosan, which is a polymer derived from crustacean chitin. It is a complex biodegradable carbohydrate [55]. The mechanism of action appears to be related to highly positively charged chitosan interacting electronically with negatively charged cell membranes of erythrocytes. The product adheres strongly to tissues and seals bleeding wounds [77, 88, 89]. Examples include HemCon (HemCon Med Tech, Portland, OR) and Celox (Med. Trade Products, UK).
Celox is a chitosan-based adhesive, which is biodegradable and causes absorption of the aqueous phase and the advancement of red blood cell bonding. The positively charged Celox binds negatively charged red blood cells independently of the body’s clotting system, resulting in clot formation without the exothermic reaction associated with certain factor concentrators like QuikClot [35]. Its action is independent of the body’s clotting system, a property that makes it useful in patients requiring antiplatelet or anticoagulant medications or in the presence of coagulopathy and its local action means that it is not associated with distant clot formation. It is also reported to be very versatile, being available in granular and bandage forms and easy to remove from the wound after its clot formation activity is complete [49, 90, 91, 92]. HemCon, however, does have a hard consistency and is made in a square shape. Therefore, it works best on flat bleeding surfaces rather than deep irregular wounds [79, 83]. Wedmore et al. [77] looked at a series of patients with prehospital combative injuries where chitosan-based products had been used externally in chest, groin, buttock and abdominal wounds in 25 patients, 35 extremity wounds and neck and facial wounds in 4 cases. In about two-thirds of cases, the chitosan dressings were used following failure of hemostasis using only gauze with 100% success. In 97% of cases, bleeding stopped or hemostasis was improved, with failure only occurring in two cases attributed to blind stuffing of bandages into large cavitational injuries [77].
Trauma Stat is another chitosan-based derivative that was developed in collaboration with the United States Army, in which the mechanism of action involves positive charges in the amine groups on the chitosan molecule interacting with negative charges on the red blood cell membranes and in addition the adsorption of chitosan for fibrinogen and plasma proteins [79, 93].
Te Grotenhuis carried out a study of 66 patients in which conventional treatment with gauze and compression failed to control excessive bleeding or where conventional treatment was unlikely to achieve hemostasis. Complete cessation of hemorrhage including arterial hemorrhage occurred in 70% using the HemCon ChitoGauze, and reduction in hemorrhage occurred in 20% of patients despite 21 patients being on anticoagulants or having a clotting disorder and no adverse events occurred [88].
Due to the fact that chitosan is derived from crustaceans, there is a theoretical risk of allergenic reactions in patients allergic to shellfish. However in a study of 19 patients who had a positive IgE test to shellfish, none of the patients demonstrated a positive skin prick test to chitosan powder or expressed a reaction to HemCon bandage during serial bandage challenges, indicating favorable but not completely risk-free use of these products [94].
Chitosan-based dressings are also easy to remove after hemostasis has been achieved [41] and are known to have some antimicrobial properties [41, 95].
Their mechanism of action is mainly to deliver factors that promote coagulation into the bleeding wound. Examples are dry fibrin sealant dressing (DFSD) and QuikClot Combat Gauze (QCG) [70, 96, 97]. QCG is a surgical gauze coated with kaolin. On contact with injured endothelium, kaolin activates the extrinsic pathway, enhancing coagulation and promoting hemostasis. It is not degradable and needs to be removed from the wound following achievement of hemostasis [76].
Kaolin-based products have been used in a military setting and have demonstrated good results in both junctional and non-junctional hemorrhage [76]. In the above study, Shina et al. retrospectively reviewed 133 kaolin-based dressings applied to 122 military patients. 27% were for junctional hemorrhage with a success rate of 88% while the rest were extremity trauma where the success rate was 92%.
In addition to problems specific to certain types of hemostatic agents, there are also general drawbacks.
The hemostats that contain biological agents, usually the active hemostats, can be associated with the risk of disease transmission. For example, DFSD has the theoretical risk of viral disease transmission and hence has not achieved FDA approval.
Some agents have handling characteristics that are beneficial in certain situations. For example agents that have a granular nature can be used for complex irregular wounds with multiple bleeding points. However, the handling characteristics are difficult and they are difficult to apply in combat situations [89]. In addition, many agents are nonabsorbable and need to be removed after hemostasis is achieved. This may be difficult with some agents and require multiple washouts. Granular agents also have the potential to enter the vascular system and occlude the distal parts of vessels, causing endothelial injury and intravascular coagulation [41]. This has been demonstrated by Kheirabadi et al. [89] in their study, and for these reasons a bandage/gauze form of hemostatic agent is preferable as being safer for hemorrhage control, avoiding intravascular complications [38].
Any chapter on hemostasis in trauma and orthopedics is incomplete without the mention of tranexamic acid. This drug has been shown to be effective in reducing mortality due to bleeding in both the military and civilian setting.
The CRASH-2 (Clinical Randomization of an Antibrinolytic in Severe Hemorrhage-2) trial was a multicenter trial involving 40 centers looking at 20,211 adult trauma patients with significant bleeding who were randomized to two arms. One arm received TA within the first 3 hours of trauma and the other received placebo. The study demonstrated a reduction in mortality risk due to any cause from 14.5% compared with 16% in the placebo group (p < 0.001), with no increase in vasoocclusive events such as pulmonary embolism or myocardial infarction (0.3% versus 0.5% p-0.096) [98].
The MATTER (Military Application of Tranexamic Acid in Trauma) study looked at 896 patients with severe combat injuries and demonstrated a 6.5% absolute risk reduction in mortality in these patients with the use of tranexamic acid [99].
Both these studies have recommended incorporation of intravenous tranexamic acid into clinical practice [24].
Joint replacements are major procedures in elective orthopedics and can be associated with significant blood loss and increased transfusion requirements if appropriate steps are not taken to mitigate against this. In addition to the conventional methods of blood management including preoperative optimization, tourniquets if appropriate, intraoperative techniques such as cell saver and cauterization, topical and pharmacological hemostats and biosurgicals may offer some excellent solutions to reduce the transfusion requirements and achieve hemostasis.
A few studies have looked at human-derived fibrin sealants in total knee replacement [100, 101, 102]. A multicenter randomized control trial looking at 58 patients who underwent total knee replacement demonstrated a reduced postoperative blood loss, reduced postoperative decrease in hemoglobin and calculated blood loss in patients in whom fibrin sealant was used compared with that in the standard group (20% compared with the standard 83% p = 0.004) [100]. Another study that showed benefit was done by Dhillon et al. [25]. Results from other studies have been equivocal and have not demonstrated any clear difference.
In total hip arthroplasty, the use of fibrin sealants has been associated with reducing blood loss but inconsistent results have been demonstrated with regard to reduction in postoperative transfusion requirements [24, 103, 104, 105].
Multiple studies have looked at platelet gels in arthroplasty surgery. The evidence has been inconsistent in many. One randomized control trial looking at 100 total knee replacements did demonstrate significantly lower transfusion requirements in patients in whom platelet gels were used [106].
Desmopressin is a synthetic analog of anti-diuretic hormone. Its mechanism of action is to increase the levels of factor VIII and Von Willebrand factor, thereby enhancing primary hemostasis and platelet aggregation and adherence. This makes it suitable as a blood management strategy in patients with platelet dysfunction or other clotting disorders such as Von Willebrand’s disease and hemophilia A [107, 108]. It has also been used in healthy individuals for reducing postoperative bleeding in total hip and knee replacement surgery [109]. Six randomized placebo-controlled trials addressing the use of desmopressin in total hip and knee arthroplasty have been undertaken [110, 111, 112, 113, 114, 115]; however, evidence suggests that desmopressin is not significantly effective in reducing blood loss or transfusion requirements in these patients [24].
There are a number of good-quality randomized control trials that support the use of tranexamic acid in reducing blood loss and transfusion requirements in both knee and hip arthroplasty surgery [24]. There is however considerable amount of heterogeneity between the trials with regard to methods of delivery including single intravenous bolus dose, repeated boluses, prolonged infusion or intraarticular injection [116], and also differing dosing regimes [117]. In total knee arthroplasty, it has been shown that one intraoperative dose is sufficiently effective in reducing transfusion requirements and postoperative bleeding [118]. With the theoretical risk of intravascular thrombosis, intraarticular injection of tranexamic acid was investigated and compared to placebo and the studies showed reduction in blood loss but no reduction in transfusion rates [101, 119, 120]. Only one RCT by Seo et al. [121] showed a reduction in transfusion requirements with intraarticular (20%) rather than intravenous (34%) or placebo (94%). The evidence in total hip replacement with regard to intraarticular tranexamic acid is less convincing than in knee arthroplasty and more studies are needed.
With regard to aminocaproic acid, three RCTs did demonstrate benefit in hip and knee replacement surgery in terms of reducing blood loss in comparison with placebo. However, with regard to reducing transfusion requirements the evidence is much less convincing [24, 122, 123, 124].
Spine surgery presents a few unique challenges that limit the products that can be used for hemostasis in these situations. One of them is the friability of neural tissue and secondly the fact that the spinal cord and nerve roots are enclosed in rigid bony spaces that limit the kinds of hemostats that can be used due to the potential of swelling and compression of neural tissue in a rigid space. In addition, there is the potential for neurotoxicity with certain agents.
Cerebrospinal fluid leaks are a common source of postoperative morbidity in patients who have undergone spinal surgery. The morbidity burden includes severe postural headaches, vomiting, dizziness, photophobia, tinnitus, pseudomeningoceles and the risk of meningitis. It is therefore important that when dural tears occur or when an iatrogenic durotomy is created a water tight repair is essential. PEG hydrogel sealant has been found to be a safe effective way to augment dural closure and prevent these complications. A prospective study by Kim et al. [66] demonstrated that augmentation of standard dural closure techniques with this sealant in patients had significantly higher rates of watertight closure than with controls (100% and 64.3% respectively), without statistical differences in cerebrospinal fluid leaks, infections or wound healing. Complications due to swelling of polyethylene glycol and nerve compression were not demonstrated in this study but this remains a possibility. This led to the development of low-swell PEG hydrogel sealant (Duraseal) [55] and has been found to be safe and effective in a 3-to-1 randomized single-blind multicenter trial in which 100% of patients who had this low-swell formulation achieved watertight dural closure. Another study has also shown that BioGlue (semisynthetic glutaraldehyde-bovine albumin sealant) is safe and cost-effective in proximity to neurological structures despite previous concerns. Miscusi et al. [125] demonstrated a watertight dural closure in 23 patients requiring dural repair, with no incidence of neurological or infection related complications.
Collagen and gelatin-based products can be used to achieve hemostasis in spinal surgery. Xu et al. [64] carried out a study on 92 patients undergoing spinal fusion surgery and concluded that collagen-based products are superior to gelatin-based products in achieving hemostasis in spine surgery, with lower blood loss and postoperative drain volume.
Oxidized regenerated cellulose has been used for hemostasis in spine surgery. However when used around or in foramina with rigid bony walls, the swelling of small portions of the cellulose material may lead to significant mass effect and neural compression 1 day after surgery as demonstrated by Menovsky et al. [126] and may lead to rapid neurological deterioration. Therefore this material should be removed after hemostasis has been achieved prior to closure.
As mentioned before, liquid fibrin sealants can be used in spine surgery for hemostasis, but those containing tranexamic acid may be associated with neurotoxicity and should not be used if CSF leak or dural tear is present [55].
Topical hemostats and biosurgicals are a diverse group of compounds that have been developed and can be used in different situations as part of a comprehensive blood management program to limit the amount of blood loss. Trauma and orthopedics as a specialty also presents some unique challenges, with operations having significant blood loss and in trauma, junctional injuries on the battlefield with hemorrhage that is hard to control by conventional means. In addition, patients may be complex and frequently have platelet or coagulation disorders that preclude the use of certain classes of hemostatic agents. As mentioned before, these compounds are diverse, with different mechanisms of actions and indications, both in an elective and an emergency trauma setting. A comprehensive knowledge of these products is essential in modern-day trauma and orthopedic practice.
Despite recent developments, the perfect hemostatic or biosurgical agent still remains elusive and each of these products has their own drawbacks, side effects and unique indications and future research will hopefully continue to improve on these.
IntechOpen Compacts provide a mid-length publishing format which bridges the gap between journal articles, book chapters and monographs, and cover content across all scientific disciplines. Compacts are the preferred publishing option for brief research reports on new topics, in-depth case studies, dissertations, or essays exploring new ideas, issues or broader topics on the research subject.
",metaTitle:"IntechOpen Compacts",metaDescription:"IntechOpen Compacts present a mid-length publishing format which bridges the gap between journal articles, book chapters, and monographs and covers content across all scientific disciplines.",metaKeywords:null,canonicalURL:"/page/compacts",contentRaw:'[{"type":"htmlEditorComponent","content":"Without sacrificing the quality of carefully edited and produced peer-reviewed content, Compacts are published as part of IntechOpen’s book collection but on a faster schedule, typically 4-6 weeks after acceptance. With an average of 132,000 visitors per week, publishing in Compacts not only guarantees high visibility but also facilitates international content sharing. As a fully Open Access publisher, the utilization of a CC BY NC 4.0 license means that other researchers will never have to pay permission fees and can adapt, use, and further build upon the material published in Compacts, eliminating any barriers to the further development of scientific research.
\\n\\nCOMPACTS-SHORT FORM MONOGRAPH
\\n\\nCOST
\\n\\n4,000 GBP Compacts Monograph - Short Form
\\n\\nThe final price will depend on the volume of the publication and includes project management, editorial and peer-review services, technical editing, language copyediting, cover design, book layout, book promotion and ISBN assignment.
\\n\\n*The price does not include Value-Added Tax (VAT). Residents of European Union countries need to add VAT based on the specific rate applicable in their country of residence. Institutions and companies registered as VAT taxable entities in their own EU member state will not pay VAT by providing us with their VAT registration number. This is made possible by the EU reverse charge method.
\\n\\nOptional Services
\\n\\nIntechOpen has collaborated with Enago, through its sister company, Ulatus – one of the world’s leading providers of book translation services. The services are designed to convey the essence of your work seamlessly to readers from across the globe in their own language. Enago’s expert translators incorporate cultural nuances in translations to make the content relevant for local audiences while retaining the original meaning and style. With a high degree of linguistic and subject expertise, Enago translators are equipped to handle all complex and multiple overlapping themes encompassed in a single book to deliver a superior quality of translation.
\\n\\nIntechOpen Authors that wish to use this service will receive a 20% discount on all translation work. For more information or a quote, please visit: https://www.enago.com/intech.
\\n\\nFUNDING
\\n\\nWe feel that financial barriers should never prevent researchers from publishing their research. Please consult our Open Access Funding page to explore funding opportunities and learn more about how you can finance your IntechOpen publication.
\\n\\nBENEFITS
\\n\\nPUBLISHING PROCESS STEPS
\\n\\nSee a complete overview and description of the steps involved in the publishing process here.
\\n\\nSEND YOUR PROPOSAL
\\n\\nIf you are interested in publishing your book with IntechOpen, please submit your book proposal by completing the Publishing Proposal Form.
\\n\\nNot sure if this is the right option for you? Please refer back to the main Publish with IntechOpen page or feel free to contact us directly at book.department@intechopen.com
\\n"}]'},components:[{type:"htmlEditorComponent",content:'Without sacrificing the quality of carefully edited and produced peer-reviewed content, Compacts are published as part of IntechOpen’s book collection but on a faster schedule, typically 4-6 weeks after acceptance. With an average of 132,000 visitors per week, publishing in Compacts not only guarantees high visibility but also facilitates international content sharing. As a fully Open Access publisher, the utilization of a CC BY NC 4.0 license means that other researchers will never have to pay permission fees and can adapt, use, and further build upon the material published in Compacts, eliminating any barriers to the further development of scientific research.
\n\nCOMPACTS-SHORT FORM MONOGRAPH
\n\nCOST
\n\n4,000 GBP Compacts Monograph - Short Form
\n\nThe final price will depend on the volume of the publication and includes project management, editorial and peer-review services, technical editing, language copyediting, cover design, book layout, book promotion and ISBN assignment.
\n\n*The price does not include Value-Added Tax (VAT). Residents of European Union countries need to add VAT based on the specific rate applicable in their country of residence. Institutions and companies registered as VAT taxable entities in their own EU member state will not pay VAT by providing us with their VAT registration number. This is made possible by the EU reverse charge method.
\n\nOptional Services
\n\nIntechOpen has collaborated with Enago, through its sister company, Ulatus – one of the world’s leading providers of book translation services. The services are designed to convey the essence of your work seamlessly to readers from across the globe in their own language. Enago’s expert translators incorporate cultural nuances in translations to make the content relevant for local audiences while retaining the original meaning and style. With a high degree of linguistic and subject expertise, Enago translators are equipped to handle all complex and multiple overlapping themes encompassed in a single book to deliver a superior quality of translation.
\n\nIntechOpen Authors that wish to use this service will receive a 20% discount on all translation work. For more information or a quote, please visit: https://www.enago.com/intech.
\n\nFUNDING
\n\nWe feel that financial barriers should never prevent researchers from publishing their research. Please consult our Open Access Funding page to explore funding opportunities and learn more about how you can finance your IntechOpen publication.
\n\nBENEFITS
\n\nPUBLISHING PROCESS STEPS
\n\nSee a complete overview and description of the steps involved in the publishing process here.
\n\nSEND YOUR PROPOSAL
\n\nIf you are interested in publishing your book with IntechOpen, please submit your book proposal by completing the Publishing Proposal Form.
\n\nNot sure if this is the right option for you? Please refer back to the main Publish with IntechOpen page or feel free to contact us directly at book.department@intechopen.com
\n'}]},successStories:{items:[]},authorsAndEditors:{filterParams:{},profiles:[{id:"396",title:"Dr.",name:"Vedran",middleName:null,surname:"Kordic",slug:"vedran-kordic",fullName:"Vedran Kordic",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/396/images/7281_n.png",biography:"After obtaining his Master's degree in Mechanical Engineering he continued his education at the Vienna University of Technology where he obtained his PhD degree in 2004. He worked as a researcher at the Automation and Control Institute, Faculty of Electrical Engineering, Vienna University of Technology until 2008. His studies in robotics lead him not only to a PhD degree but also inspired him to co-found and build the International Journal of Advanced Robotic Systems - world's first Open Access journal in the field of robotics.",institutionString:null,institution:{name:"TU Wien",country:{name:"Austria"}}},{id:"441",title:"Ph.D.",name:"Jaekyu",middleName:null,surname:"Park",slug:"jaekyu-park",fullName:"Jaekyu Park",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/441/images/1881_n.jpg",biography:null,institutionString:null,institution:{name:"LG Corporation (South Korea)",country:{name:"Korea, South"}}},{id:"465",title:"Dr",name:"Christian",middleName:null,surname:"Martens",slug:"christian-martens",fullName:"Christian Martens",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"479",title:"Dr.",name:"Valentina",middleName:null,surname:"Colla",slug:"valentina-colla",fullName:"Valentina Colla",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/479/images/358_n.jpg",biography:null,institutionString:null,institution:{name:"Sant'Anna School of Advanced Studies",country:{name:"Italy"}}},{id:"494",title:"PhD",name:"Loris",middleName:null,surname:"Nanni",slug:"loris-nanni",fullName:"Loris Nanni",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/494/images/system/494.jpg",biography:"Loris Nanni received his Master Degree cum laude on June-2002 from the University of Bologna, and the April 26th 2006 he received his Ph.D. in Computer Engineering at DEIS, University of Bologna. On September, 29th 2006 he has won a post PhD fellowship from the university of Bologna (from October 2006 to October 2008), at the competitive examination he was ranked first in the industrial engineering area. He extensively served as referee for several international journals. He is author/coauthor of more than 100 research papers. He has been involved in some projects supported by MURST and European Community. His research interests include pattern recognition, bioinformatics, and biometric systems (fingerprint classification and recognition, signature verification, face recognition).",institutionString:null,institution:null},{id:"496",title:"Dr.",name:"Carlos",middleName:null,surname:"Leon",slug:"carlos-leon",fullName:"Carlos Leon",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Seville",country:{name:"Spain"}}},{id:"512",title:"Dr.",name:"Dayang",middleName:null,surname:"Jawawi",slug:"dayang-jawawi",fullName:"Dayang Jawawi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Technology Malaysia",country:{name:"Malaysia"}}},{id:"528",title:"Dr.",name:"Kresimir",middleName:null,surname:"Delac",slug:"kresimir-delac",fullName:"Kresimir Delac",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/528/images/system/528.jpg",biography:"K. Delac received his B.Sc.E.E. degree in 2003 and is currentlypursuing a Ph.D. degree at the University of Zagreb, Faculty of Electrical Engineering andComputing. His current research interests are digital image analysis, pattern recognition andbiometrics.",institutionString:null,institution:{name:"University of Zagreb",country:{name:"Croatia"}}},{id:"557",title:"Dr.",name:"Andon",middleName:"Venelinov",surname:"Topalov",slug:"andon-topalov",fullName:"Andon Topalov",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/557/images/1927_n.jpg",biography:"Dr. Andon V. Topalov received the MSc degree in Control Engineering from the Faculty of Information Systems, Technologies, and Automation at Moscow State University of Civil Engineering (MGGU) in 1979. He then received his PhD degree in Control Engineering from the Department of Automation and Remote Control at Moscow State Mining University (MGSU), Moscow, in 1984. From 1985 to 1986, he was a Research Fellow in the Research Institute for Electronic Equipment, ZZU AD, Plovdiv, Bulgaria. In 1986, he joined the Department of Control Systems, Technical University of Sofia at the Plovdiv campus, where he is presently a Full Professor. He has held long-term visiting Professor/Scholar positions at various institutions in South Korea, Turkey, Mexico, Greece, Belgium, UK, and Germany. And he has coauthored one book and authored or coauthored more than 80 research papers in conference proceedings and journals. His current research interests are in the fields of intelligent control and robotics.",institutionString:null,institution:{name:"Technical University of Sofia",country:{name:"Bulgaria"}}},{id:"585",title:"Prof.",name:"Munir",middleName:null,surname:"Merdan",slug:"munir-merdan",fullName:"Munir Merdan",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/585/images/system/585.jpg",biography:"Munir Merdan received the M.Sc. degree in mechanical engineering from the Technical University of Sarajevo, Bosnia and Herzegovina, in 2001, and the Ph.D. degree in electrical engineering from the Vienna University of Technology, Vienna, Austria, in 2009.Since 2005, he has been at the Automation and Control Institute, Vienna University of Technology, where he is currently a Senior Researcher. His research interests include the application of agent technology for achieving agile control in the manufacturing environment.",institutionString:null,institution:null},{id:"605",title:"Prof",name:"Dil",middleName:null,surname:"Hussain",slug:"dil-hussain",fullName:"Dil Hussain",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/605/images/system/605.jpg",biography:"Dr. Dil Muhammad Akbar Hussain is a professor of Electronics Engineering & Computer Science at the Department of Energy Technology, Aalborg University Denmark. Professor Akbar has a Master degree in Digital Electronics from Govt. College University, Lahore Pakistan and a P-hD degree in Control Engineering from the School of Engineering and Applied Sciences, University of Sussex United Kingdom. Aalborg University has Two Satellite Campuses, one in Copenhagen (Aalborg University Copenhagen) and the other in Esbjerg (Aalborg University Esbjerg).\n· He is a member of prestigious IEEE (Institute of Electrical and Electronics Engineers), and IAENG (International Association of Engineers) organizations. \n· He is the chief Editor of the Journal of Software Engineering.\n· He is the member of the Editorial Board of International Journal of Computer Science and Software Technology (IJCSST) and International Journal of Computer Engineering and Information Technology. \n· He is also the Editor of Communication in Computer and Information Science CCIS-20 by Springer.\n· Reviewer For Many Conferences\nHe is the lead person in making collaboration agreements between Aalborg University and many universities of Pakistan, for which the MOU’s (Memorandum of Understanding) have been signed.\nProfessor Akbar is working in Academia since 1990, he started his career as a Lab demonstrator/TA at the University of Sussex. After finishing his P. hD degree in 1992, he served in the Industry as a Scientific Officer and continued his academic career as a visiting scholar for a number of educational institutions. In 1996 he joined National University of Science & Technology Pakistan (NUST) as an Associate Professor; NUST is one of the top few universities in Pakistan. In 1999 he joined an International Company Lineo Inc, Canada as Manager Compiler Group, where he headed the group for developing Compiler Tool Chain and Porting of Operating Systems for the BLACKfin processor. The processor development was a joint venture by Intel and Analog Devices. In 2002 Lineo Inc., was taken over by another company, so he joined Aalborg University Denmark as an Assistant Professor.\nProfessor Akbar has truly a multi-disciplined career and he continued his legacy and making progress in many areas of his interests both in teaching and research. He has contributed in stochastic estimation of control area especially, in the Multiple Target Tracking and Interactive Multiple Model (IMM) research, Ball & Beam Control Problem, Robotics, Levitation Control. He has contributed in developing Algorithms for Fingerprint Matching, Computer Vision and Face Recognition. He has been supervising Pattern Recognition, Formal Languages and Distributed Processing projects for several years. He has reviewed many books on Management, Computer Science. Currently, he is an active and permanent reviewer for many international conferences and symposia and the program committee member for many international conferences.\nIn teaching he has taught the core computer science subjects like, Digital Design, Real Time Embedded System Programming, Operating Systems, Software Engineering, Data Structures, Databases, Compiler Construction. In the Engineering side, Digital Signal Processing, Computer Architecture, Electronics Devices, Digital Filtering and Engineering Management.\nApart from his Academic Interest and activities he loves sport especially, Cricket, Football, Snooker and Squash. He plays cricket for Esbjerg city in the second division team as an opener wicket keeper batsman. He is a very good player of squash but has not played squash since his arrival in Denmark.",institutionString:null,institution:null},{id:"611",title:"Prof.",name:"T",middleName:null,surname:"Nagarajan",slug:"t-nagarajan",fullName:"T Nagarajan",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Universiti Teknologi Petronas",country:{name:"Malaysia"}}}],filtersByRegion:[{group:"region",caption:"North America",value:1,count:6675},{group:"region",caption:"Middle and South America",value:2,count:5955},{group:"region",caption:"Africa",value:3,count:2460},{group:"region",caption:"Asia",value:4,count:12718},{group:"region",caption:"Australia and Oceania",value:5,count:1018},{group:"region",caption:"Europe",value:6,count:17721}],offset:12,limit:12,total:134203},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{hasNoEditors:"0",sort:"dateEndThirdStepPublish",topicId:"5,6,12,13,18"},books:[{type:"book",id:"11369",title:"RNA Viruses",subtitle:null,isOpenForSubmission:!0,hash:"52f8a3a1486912beae40b34ac557fed3",slug:null,bookSignature:"Ph.D. Yogendra Shah",coverURL:"https://cdn.intechopen.com/books/images_new/11369.jpg",editedByType:null,editors:[{id:"278914",title:"Ph.D.",name:"Yogendra",surname:"Shah",slug:"yogendra-shah",fullName:"Yogendra Shah"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11610",title:"New Insights in Herbicide Science",subtitle:null,isOpenForSubmission:!0,hash:"eb3830b8176caf3d1fd52c32313c5168",slug:null,bookSignature:"Ph.D. Kassio Ferreira Mendes",coverURL:"https://cdn.intechopen.com/books/images_new/11610.jpg",editedByType:null,editors:[{id:"197720",title:"Ph.D.",name:"Kassio",surname:"Ferreira Mendes",slug:"kassio-ferreira-mendes",fullName:"Kassio Ferreira Mendes"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11475",title:"Food Security Challenges and Approaches",subtitle:null,isOpenForSubmission:!0,hash:"090302a30e461cee643ec49675c811ec",slug:null,bookSignature:"Dr. Muhammad Haseeb Ahmad, Dr. Muhammad Imran and Dr. Muhammad Kamran Khan",coverURL:"https://cdn.intechopen.com/books/images_new/11475.jpg",editedByType:null,editors:[{id:"292145",title:"Dr.",name:"Muhammad",surname:"Haseeb Ahmad",slug:"muhammad-haseeb-ahmad",fullName:"Muhammad Haseeb Ahmad"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11607",title:"Aquatic Plants - Biology and Environmental Impacts",subtitle:null,isOpenForSubmission:!0,hash:"9103c1501af58e2c24202646f15f0940",slug:null,bookSignature:"Dr. Abd El-Fatah Abomohra, Dr. Mei Li and Dr. Adel W. Almutairi",coverURL:"https://cdn.intechopen.com/books/images_new/11607.jpg",editedByType:null,editors:[{id:"186114",title:"Dr.",name:"Abdelfatah",surname:"Abomohra",slug:"abdelfatah-abomohra",fullName:"Abdelfatah Abomohra"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11672",title:"Chemokines Updates",subtitle:null,isOpenForSubmission:!0,hash:"c00855833476a514d37abf7c846e16e9",slug:null,bookSignature:"Prof. Murat Şentürk",coverURL:"https://cdn.intechopen.com/books/images_new/11672.jpg",editedByType:null,editors:[{id:"14794",title:"Prof.",name:"Murat",surname:"Şentürk",slug:"murat-senturk",fullName:"Murat Şentürk"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11674",title:"Updates on Endoplasmic Reticulum",subtitle:null,isOpenForSubmission:!0,hash:"5d7d49bd80f53dad3761f78de4a862c6",slug:null,bookSignature:"Dr. Gaia Favero",coverURL:"https://cdn.intechopen.com/books/images_new/11674.jpg",editedByType:null,editors:[{id:"238047",title:"Dr.",name:"Gaia",surname:"Favero",slug:"gaia-favero",fullName:"Gaia Favero"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11635",title:"Towards New Perspectives on Toxoplasma gondii",subtitle:null,isOpenForSubmission:!0,hash:"2d409a285bea682efb34a817b0651aba",slug:null,bookSignature:"Dr. Saeed El-Ashram, Dr. Guillermo Téllez and Dr. Firas Alali",coverURL:"https://cdn.intechopen.com/books/images_new/11635.jpg",editedByType:null,editors:[{id:"209746",title:"Dr.",name:"Saeed",surname:"El-Ashram",slug:"saeed-el-ashram",fullName:"Saeed El-Ashram"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11450",title:"Environmental Impacts of COVID-19 Pandemic on the World",subtitle:null,isOpenForSubmission:!0,hash:"a58c7b02d07903004be70f744f2e1835",slug:null,bookSignature:"Prof. Mohamed Nageeb Rashed and Prof. Wafaa M. Abd El-Rahim",coverURL:"https://cdn.intechopen.com/books/images_new/11450.jpg",editedByType:null,editors:[{id:"63465",title:"Prof.",name:"Mohamed Nageeb",surname:"Rashed",slug:"mohamed-nageeb-rashed",fullName:"Mohamed Nageeb Rashed"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11626",title:"Brassica - Recent Advances",subtitle:null,isOpenForSubmission:!0,hash:"79b540fc5f61052fefeddda2b07fcde9",slug:null,bookSignature:"Dr. Sarwan Kumar",coverURL:"https://cdn.intechopen.com/books/images_new/11626.jpg",editedByType:null,editors:[{id:"229507",title:"Dr.",name:"Sarwan",surname:"Kumar",slug:"sarwan-kumar",fullName:"Sarwan Kumar"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11799",title:"Salmonella - Past, Present and Future",subtitle:null,isOpenForSubmission:!0,hash:"6ddb13c31fb19c6f79d19f11ceeb860e",slug:null,bookSignature:"Ph.D. Hongsheng Huang and Dr. Sohail Naushad",coverURL:"https://cdn.intechopen.com/books/images_new/11799.jpg",editedByType:null,editors:[{id:"342722",title:"Ph.D.",name:"Hongsheng",surname:"Huang",slug:"hongsheng-huang",fullName:"Hongsheng Huang"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11639",title:"Vitamin D Deficiency - New Insights",subtitle:null,isOpenForSubmission:!0,hash:"b3249deb4cc255484aac878ab8309ded",slug:null,bookSignature:"Prof. Julia Fedotova",coverURL:"https://cdn.intechopen.com/books/images_new/11639.jpg",editedByType:null,editors:[{id:"269070",title:"Prof.",name:"Julia",surname:"Fedotova",slug:"julia-fedotova",fullName:"Julia Fedotova"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11791",title:"Smart Farming",subtitle:null,isOpenForSubmission:!0,hash:"fbed803d36e40c6040464c8006736a52",slug:null,bookSignature:"Dr. Subhan Danish, Dr. Hakoomat Ali and Dr. Rahul Datta",coverURL:"https://cdn.intechopen.com/books/images_new/11791.jpg",editedByType:null,editors:[{id:"452655",title:"Dr.",name:"Subhan",surname:"Danish",slug:"subhan-danish",fullName:"Subhan Danish"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:38},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:12},{group:"topic",caption:"Business, Management and Economics",value:7,count:7},{group:"topic",caption:"Chemistry",value:8,count:22},{group:"topic",caption:"Computer and Information Science",value:9,count:23},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:15},{group:"topic",caption:"Engineering",value:11,count:63},{group:"topic",caption:"Environmental Sciences",value:12,count:9},{group:"topic",caption:"Immunology and Microbiology",value:13,count:15},{group:"topic",caption:"Materials Science",value:14,count:24},{group:"topic",caption:"Mathematics",value:15,count:11},{group:"topic",caption:"Medicine",value:16,count:112},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:6},{group:"topic",caption:"Neuroscience",value:18,count:3},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:9},{group:"topic",caption:"Physics",value:20,count:9},{group:"topic",caption:"Psychology",value:21,count:10},{group:"topic",caption:"Robotics",value:22,count:2},{group:"topic",caption:"Social Sciences",value:23,count:9},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:4}],offset:12,limit:12,total:77},popularBooks:{featuredBooks:[{type:"book",id:"10858",title:"MOOC (Massive Open Online Courses)",subtitle:null,isOpenForSubmission:!1,hash:"d32f86793bc72dde32532f509b1ec5b0",slug:"mooc-massive-open-online-courses-",bookSignature:"Dragan Cvetković",coverURL:"https://cdn.intechopen.com/books/images_new/10858.jpg",editors:[{id:"101330",title:"Dr.",name:"Dragan",middleName:"Mladen",surname:"Cvetković",slug:"dragan-cvetkovic",fullName:"Dragan Cvetković"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10195",title:"Serotonin and the CNS",subtitle:"New Developments in Pharmacology and Therapeutics",isOpenForSubmission:!1,hash:"7ed9d96da98233a885bd2869a8056c36",slug:"serotonin-and-the-cns-new-developments-in-pharmacology-and-therapeutics",bookSignature:"Berend Olivier",coverURL:"https://cdn.intechopen.com/books/images_new/10195.jpg",editors:[{id:"71579",title:"Prof.",name:"Berend",middleName:null,surname:"Olivier",slug:"berend-olivier",fullName:"Berend Olivier"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10755",title:"Corporate Governance",subtitle:"Recent Advances and Perspectives",isOpenForSubmission:!1,hash:"ffe06d1d5c4bf0fc2e63511825fe1257",slug:"corporate-governance-recent-advances-and-perspectives",bookSignature:"Okechukwu Lawrence Emeagwali and Feyza Bhatti",coverURL:"https://cdn.intechopen.com/books/images_new/10755.jpg",editors:[{id:"196317",title:"Associate Prof.",name:"Okechukwu Lawrence",middleName:null,surname:"Emeagwali",slug:"okechukwu-lawrence-emeagwali",fullName:"Okechukwu Lawrence Emeagwali"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11120",title:"Environmental Impact and Remediation of Heavy Metals",subtitle:null,isOpenForSubmission:!1,hash:"9e77514288e7394f1e6cd13481af3509",slug:"environmental-impact-and-remediation-of-heavy-metals",bookSignature:"Hosam M. Saleh and Amal I. Hassan",coverURL:"https://cdn.intechopen.com/books/images_new/11120.jpg",editors:[{id:"144691",title:"Prof.",name:"Hosam M.",middleName:null,surname:"Saleh",slug:"hosam-m.-saleh",fullName:"Hosam M. Saleh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10901",title:"Grapes and Wine",subtitle:null,isOpenForSubmission:!1,hash:"5d7f2aa74874444bc6986e613ccebd7c",slug:"grapes-and-wine",bookSignature:"Antonio Morata, Iris Loira and Carmen González",coverURL:"https://cdn.intechopen.com/books/images_new/10901.jpg",editors:[{id:"180952",title:"Prof.",name:"Antonio",middleName:null,surname:"Morata",slug:"antonio-morata",fullName:"Antonio Morata"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11080",title:"Engineering Principles",subtitle:"Welding and Residual Stresses",isOpenForSubmission:!1,hash:"6c07a13a113bce94174b40096f30fb5e",slug:"engineering-principles-welding-and-residual-stresses",bookSignature:"Kavian Omar Cooke and Ronaldo Câmara Cozza",coverURL:"https://cdn.intechopen.com/books/images_new/11080.jpg",editors:[{id:"138778",title:"Dr.",name:"Kavian",middleName:"Omar",surname:"Cooke",slug:"kavian-cooke",fullName:"Kavian Cooke"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11332",title:"Essential Oils",subtitle:"Advances in Extractions and Biological Applications",isOpenForSubmission:!1,hash:"742e6cae3a35686f975edc8d7f9afa94",slug:"essential-oils-advances-in-extractions-and-biological-applications",bookSignature:"Mozaniel Santana de Oliveira and Eloisa Helena de Aguiar Andrade",coverURL:"https://cdn.intechopen.com/books/images_new/11332.jpg",editors:[{id:"195290",title:"Ph.D.",name:"Mozaniel",middleName:null,surname:"Santana De Oliveira",slug:"mozaniel-santana-de-oliveira",fullName:"Mozaniel Santana De Oliveira"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11029",title:"Hepatitis B",subtitle:null,isOpenForSubmission:!1,hash:"609701f502efc3538c112ff47a2c2119",slug:"hepatitis-b",bookSignature:"Luis Rodrigo",coverURL:"https://cdn.intechopen.com/books/images_new/11029.jpg",editors:[{id:"73208",title:"Prof.",name:"Luis",middleName:null,surname:"Rodrigo",slug:"luis-rodrigo",fullName:"Luis Rodrigo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9537",title:"Human Rights in the Contemporary World",subtitle:null,isOpenForSubmission:!1,hash:"54f05b93812fd434f3962956d6413a6b",slug:"human-rights-in-the-contemporary-world",bookSignature:"Trudy Corrigan",coverURL:"https://cdn.intechopen.com/books/images_new/9537.jpg",editors:[{id:"197557",title:"Dr.",name:"Trudy",middleName:null,surname:"Corrigan",slug:"trudy-corrigan",fullName:"Trudy Corrigan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11371",title:"Cerebral Circulation",subtitle:"Updates on Models, Diagnostics and Treatments of Related Diseases",isOpenForSubmission:!1,hash:"e2d3335445d2852d0b906bb9750e939f",slug:"cerebral-circulation-updates-on-models-diagnostics-and-treatments-of-related-diseases",bookSignature:"Alba Scerrati, Luca Ricciardi and Flavia Dones",coverURL:"https://cdn.intechopen.com/books/images_new/11371.jpg",editors:[{id:"182614",title:"Dr.",name:"Alba",middleName:null,surname:"Scerrati",slug:"alba-scerrati",fullName:"Alba Scerrati"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11012",title:"Radiopharmaceuticals",subtitle:"Current Research for Better Diagnosis and Therapy",isOpenForSubmission:!1,hash:"f9046d6f96148b285e776f384991120d",slug:"radiopharmaceuticals-current-research-for-better-diagnosis-and-therapy",bookSignature:"Farid A. Badria",coverURL:"https://cdn.intechopen.com/books/images_new/11012.jpg",editors:[{id:"41865",title:"Prof.",name:"Farid A.",middleName:null,surname:"Badria",slug:"farid-a.-badria",fullName:"Farid A. Badria"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9974",title:"E-Learning and Digital Education in the Twenty-First Century",subtitle:null,isOpenForSubmission:!1,hash:"88b58d66e975df20425fc1dfd22d53aa",slug:"e-learning-and-digital-education-in-the-twenty-first-century",bookSignature:"M. Mahruf C. Shohel",coverURL:"https://cdn.intechopen.com/books/images_new/9974.jpg",editors:[{id:"94099",title:"Dr.",name:"M. Mahruf C.",middleName:null,surname:"Shohel",slug:"m.-mahruf-c.-shohel",fullName:"M. Mahruf C. Shohel"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:12,limit:12,total:4433},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"10858",title:"MOOC (Massive Open Online Courses)",subtitle:null,isOpenForSubmission:!1,hash:"d32f86793bc72dde32532f509b1ec5b0",slug:"mooc-massive-open-online-courses-",bookSignature:"Dragan Cvetković",coverURL:"https://cdn.intechopen.com/books/images_new/10858.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:1677,editors:[{id:"101330",title:"Dr.",name:"Dragan",middleName:"Mladen",surname:"Cvetković",slug:"dragan-cvetkovic",fullName:"Dragan Cvetković"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10195",title:"Serotonin and the CNS",subtitle:"New Developments in Pharmacology and Therapeutics",isOpenForSubmission:!1,hash:"7ed9d96da98233a885bd2869a8056c36",slug:"serotonin-and-the-cns-new-developments-in-pharmacology-and-therapeutics",bookSignature:"Berend Olivier",coverURL:"https://cdn.intechopen.com/books/images_new/10195.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:1337,editors:[{id:"71579",title:"Prof.",name:"Berend",middleName:null,surname:"Olivier",slug:"berend-olivier",fullName:"Berend Olivier"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10755",title:"Corporate Governance",subtitle:"Recent Advances and Perspectives",isOpenForSubmission:!1,hash:"ffe06d1d5c4bf0fc2e63511825fe1257",slug:"corporate-governance-recent-advances-and-perspectives",bookSignature:"Okechukwu Lawrence Emeagwali and Feyza Bhatti",coverURL:"https://cdn.intechopen.com/books/images_new/10755.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:1309,editors:[{id:"196317",title:"Associate Prof.",name:"Okechukwu Lawrence",middleName:null,surname:"Emeagwali",slug:"okechukwu-lawrence-emeagwali",fullName:"Okechukwu Lawrence Emeagwali"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11120",title:"Environmental Impact and Remediation of Heavy Metals",subtitle:null,isOpenForSubmission:!1,hash:"9e77514288e7394f1e6cd13481af3509",slug:"environmental-impact-and-remediation-of-heavy-metals",bookSignature:"Hosam M. Saleh and Amal I. Hassan",coverURL:"https://cdn.intechopen.com/books/images_new/11120.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:847,editors:[{id:"144691",title:"Prof.",name:"Hosam M.",middleName:null,surname:"Saleh",slug:"hosam-m.-saleh",fullName:"Hosam M. Saleh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10901",title:"Grapes and Wine",subtitle:null,isOpenForSubmission:!1,hash:"5d7f2aa74874444bc6986e613ccebd7c",slug:"grapes-and-wine",bookSignature:"Antonio Morata, Iris Loira and Carmen González",coverURL:"https://cdn.intechopen.com/books/images_new/10901.jpg",publishedDate:"June 15th 2022",numberOfDownloads:2273,editors:[{id:"180952",title:"Prof.",name:"Antonio",middleName:null,surname:"Morata",slug:"antonio-morata",fullName:"Antonio Morata"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11080",title:"Engineering Principles",subtitle:"Welding and Residual Stresses",isOpenForSubmission:!1,hash:"6c07a13a113bce94174b40096f30fb5e",slug:"engineering-principles-welding-and-residual-stresses",bookSignature:"Kavian Omar Cooke and Ronaldo Câmara Cozza",coverURL:"https://cdn.intechopen.com/books/images_new/11080.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:591,editors:[{id:"138778",title:"Dr.",name:"Kavian",middleName:"Omar",surname:"Cooke",slug:"kavian-cooke",fullName:"Kavian Cooke"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11332",title:"Essential Oils",subtitle:"Advances in Extractions and Biological Applications",isOpenForSubmission:!1,hash:"742e6cae3a35686f975edc8d7f9afa94",slug:"essential-oils-advances-in-extractions-and-biological-applications",bookSignature:"Mozaniel Santana de Oliveira and Eloisa Helena de Aguiar Andrade",coverURL:"https://cdn.intechopen.com/books/images_new/11332.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:515,editors:[{id:"195290",title:"Ph.D.",name:"Mozaniel",middleName:null,surname:"Santana De Oliveira",slug:"mozaniel-santana-de-oliveira",fullName:"Mozaniel Santana De Oliveira"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11029",title:"Hepatitis B",subtitle:null,isOpenForSubmission:!1,hash:"609701f502efc3538c112ff47a2c2119",slug:"hepatitis-b",bookSignature:"Luis Rodrigo",coverURL:"https://cdn.intechopen.com/books/images_new/11029.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:413,editors:[{id:"73208",title:"Prof.",name:"Luis",middleName:null,surname:"Rodrigo",slug:"luis-rodrigo",fullName:"Luis Rodrigo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9537",title:"Human Rights in the Contemporary World",subtitle:null,isOpenForSubmission:!1,hash:"54f05b93812fd434f3962956d6413a6b",slug:"human-rights-in-the-contemporary-world",bookSignature:"Trudy Corrigan",coverURL:"https://cdn.intechopen.com/books/images_new/9537.jpg",publishedDate:"June 8th 2022",numberOfDownloads:2194,editors:[{id:"197557",title:"Dr.",name:"Trudy",middleName:null,surname:"Corrigan",slug:"trudy-corrigan",fullName:"Trudy Corrigan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11371",title:"Cerebral Circulation",subtitle:"Updates on Models, Diagnostics and Treatments of Related Diseases",isOpenForSubmission:!1,hash:"e2d3335445d2852d0b906bb9750e939f",slug:"cerebral-circulation-updates-on-models-diagnostics-and-treatments-of-related-diseases",bookSignature:"Alba Scerrati, Luca Ricciardi and Flavia Dones",coverURL:"https://cdn.intechopen.com/books/images_new/11371.jpg",publishedDate:"June 23rd 2022",numberOfDownloads:341,editors:[{id:"182614",title:"Dr.",name:"Alba",middleName:null,surname:"Scerrati",slug:"alba-scerrati",fullName:"Alba Scerrati"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"11043",title:"Endometriosis",subtitle:"Recent Advances, New Perspectives and Treatments",isOpenForSubmission:!1,hash:"7baf1c70b11d41400bb9302ae9411ca4",slug:"endometriosis-recent-advances-new-perspectives-and-treatments",bookSignature:"Giovana Ap. Gonçalves",coverURL:"https://cdn.intechopen.com/books/images_new/11043.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"185930",title:"Associate Prof.",name:"Giovana",middleName:null,surname:"Gonçalves",slug:"giovana-goncalves",fullName:"Giovana Gonçalves"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10536",title:"Campylobacter",subtitle:null,isOpenForSubmission:!1,hash:"c4b132b741dd0a2ed539b824ab63965f",slug:"campylobacter",bookSignature:"Guillermo Tellez-Isaias and Saeed El-Ashram",coverURL:"https://cdn.intechopen.com/books/images_new/10536.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"73465",title:"Dr.",name:"Guillermo",middleName:null,surname:"Téllez",slug:"guillermo-tellez",fullName:"Guillermo Téllez"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10798",title:"Starch",subtitle:"Evolution and Recent Advances",isOpenForSubmission:!1,hash:"f197f6062c1574a9a90e50a369271bcf",slug:"starch-evolution-and-recent-advances",bookSignature:"Martins Ochubiojo Emeje",coverURL:"https://cdn.intechopen.com/books/images_new/10798.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"94311",title:"Prof.",name:"Martins",middleName:"Ochubiojo",surname:"Ochubiojo Emeje",slug:"martins-ochubiojo-emeje",fullName:"Martins Ochubiojo Emeje"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11083",title:"Hazardous Waste Management",subtitle:null,isOpenForSubmission:!1,hash:"d553bd4f6f1c4b115ca69bd19faac7dc",slug:"hazardous-waste-management",bookSignature:"Rajesh Banu Jeyakumar, Kavitha Sankarapandian and Yukesh Kannah Ravi",coverURL:"https://cdn.intechopen.com/books/images_new/11083.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"218539",title:"Dr.",name:"Rajesh Banu",middleName:null,surname:"Jeyakumar",slug:"rajesh-banu-jeyakumar",fullName:"Rajesh Banu Jeyakumar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10848",title:"Tribology of Machine Elements",subtitle:"Fundamentals and Applications",isOpenForSubmission:!1,hash:"3c4ca4c4692ca8d4fa749b4ae81ec1fa",slug:"tribology-of-machine-elements-fundamentals-and-applications",bookSignature:"Giuseppe Pintaude, Tiago Cousseau and Anna Rudawska",coverURL:"https://cdn.intechopen.com/books/images_new/10848.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"18347",title:"Prof.",name:"Giuseppe",middleName:null,surname:"Pintaude",slug:"giuseppe-pintaude",fullName:"Giuseppe Pintaude"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10856",title:"Crude Oil",subtitle:"New Technologies and Recent Approaches",isOpenForSubmission:!1,hash:"8d0a7ca35b3de95b295dc4eab39a087e",slug:"crude-oil-new-technologies-and-recent-approaches",bookSignature:"Manar Elsayed Abdel-Raouf and Mohamed Hasan El-Keshawy",coverURL:"https://cdn.intechopen.com/books/images_new/10856.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"102626",title:"Prof.",name:"Manar",middleName:null,surname:"Elsayed Abdel-Raouf",slug:"manar-elsayed-abdel-raouf",fullName:"Manar Elsayed Abdel-Raouf"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9625",title:"Spinocerebellar Ataxia",subtitle:"Concepts, Particularities and Generalities",isOpenForSubmission:!1,hash:"365a7025fd46eb45de2549bdd9d50b98",slug:"spinocerebellar-ataxia-concepts-particularities-and-generalities",bookSignature:"Patricia Bozzetto Ambrosi",coverURL:"https://cdn.intechopen.com/books/images_new/9625.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"221787",title:"Dr.",name:"Patricia",middleName:null,surname:"Bozzetto Ambrosi",slug:"patricia-bozzetto-ambrosi",fullName:"Patricia Bozzetto Ambrosi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10905",title:"Plant Defense Mechanisms",subtitle:null,isOpenForSubmission:!1,hash:"84ad5b27dde5f01dc76087d0fd6fa834",slug:"plant-defense-mechanisms",bookSignature:"Josphert Ngui Kimatu",coverURL:"https://cdn.intechopen.com/books/images_new/10905.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"224171",title:"Prof.",name:"Josphert N.",middleName:null,surname:"Kimatu",slug:"josphert-n.-kimatu",fullName:"Josphert N. Kimatu"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10686",title:"Natural Gas",subtitle:"New Perspectives and Future Developments",isOpenForSubmission:!1,hash:"581763788a6a59e653a9d1d9b5a42d79",slug:"natural-gas-new-perspectives-and-future-developments",bookSignature:"Maryam Takht Ravanchi",coverURL:"https://cdn.intechopen.com/books/images_new/10686.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"2416",title:"Dr.",name:"Maryam",middleName:null,surname:"Takht Ravanchi",slug:"maryam-takht-ravanchi",fullName:"Maryam Takht Ravanchi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10988",title:"Railway Transport Planning and Manageme",subtitle:null,isOpenForSubmission:!1,hash:"5cb54cc53caedad9ec78372563c82e2c",slug:"railway-transport-planning-and-management",bookSignature:"Stefano de Luca, Roberta Di Pace and Chiara Fiori",coverURL:"https://cdn.intechopen.com/books/images_new/10988.jpg",editedByType:"Edited by",publishedDate:"June 28th 2022",editors:[{id:"271061",title:"Prof.",name:"Stefano",middleName:null,surname:"de Luca",slug:"stefano-de-luca",fullName:"Stefano de Luca"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"944",title:"Metallurgy",slug:"metals-and-nonmetals-metallurgy",parent:{id:"158",title:"Metals and Nonmetals",slug:"metals-and-nonmetals"},numberOfBooks:42,numberOfSeries:0,numberOfAuthorsAndEditors:854,numberOfWosCitations:2274,numberOfCrossrefCitations:1183,numberOfDimensionsCitations:2793,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicId:"944",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"9991",title:"Iron Ores",subtitle:null,isOpenForSubmission:!1,hash:"f1b2c288312233e1be62cd01c7e74fec",slug:"iron-ores",bookSignature:"Volodymyr Shatokha",coverURL:"https://cdn.intechopen.com/books/images_new/9991.jpg",editedByType:"Edited by",editors:[{id:"111000",title:"Dr.",name:"Volodymyr",middleName:null,surname:"Shatokha",slug:"volodymyr-shatokha",fullName:"Volodymyr Shatokha"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10432",title:"Casting Processes and Modelling of Metallic Materials",subtitle:null,isOpenForSubmission:!1,hash:"2c5c9df938666bf5d1797727db203a6d",slug:"casting-processes-and-modelling-of-metallic-materials",bookSignature:"Zakaria Abdallah and Nada Aldoumani",coverURL:"https://cdn.intechopen.com/books/images_new/10432.jpg",editedByType:"Edited by",editors:[{id:"201670",title:"Dr.",name:"Zak",middleName:null,surname:"Abdallah",slug:"zak-abdallah",fullName:"Zak Abdallah"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7722",title:"Recent Advancements in the Metallurgical Engineering and Electrodeposition",subtitle:null,isOpenForSubmission:!1,hash:"0d7ff67bd6f4c13830658bc6f9a75851",slug:"recent-advancements-in-the-metallurgical-engineering-and-electrodeposition",bookSignature:"Uday Basheer Al-Naib, Dhanasekaran Vikraman and K. Karuppasamy",coverURL:"https://cdn.intechopen.com/books/images_new/7722.jpg",editedByType:"Edited by",editors:[{id:"182041",title:null,name:"Uday",middleName:"M.",surname:"Basheer",slug:"uday-basheer",fullName:"Uday Basheer"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8408",title:"Titanium Alloys",subtitle:"Novel Aspects of Their Manufacturing and Processing",isOpenForSubmission:!1,hash:"e5533136b732dc4ada818553023d4d55",slug:"titanium-alloys-novel-aspects-of-their-manufacturing-and-processing",bookSignature:"Maciej Motyka, Waldemar Ziaja and Jan Sieniawsk",coverURL:"https://cdn.intechopen.com/books/images_new/8408.jpg",editedByType:"Edited by",editors:[{id:"101690",title:"Associate Prof.",name:"Maciej",middleName:null,surname:"Motyka",slug:"maciej-motyka",fullName:"Maciej Motyka"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7563",title:"Lead Free Solders",subtitle:null,isOpenForSubmission:!1,hash:"fa9e966728c9c936c095b75b3c94526d",slug:"lead-free-solders",bookSignature:"Abhijit Kar",coverURL:"https://cdn.intechopen.com/books/images_new/7563.jpg",editedByType:"Edited by",editors:[{id:"111049",title:"Dr.",name:"Abhijit",middleName:null,surname:"Kar",slug:"abhijit-kar",fullName:"Abhijit Kar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7564",title:"Stainless Steels and Alloys",subtitle:null,isOpenForSubmission:!1,hash:"9a9d0d51670e197f855d03bed672e493",slug:"stainless-steels-and-alloys",bookSignature:"Zoia Duriagina",coverURL:"https://cdn.intechopen.com/books/images_new/7564.jpg",editedByType:"Edited by",editors:[{id:"205149",title:"Prof.",name:"Zoia",middleName:null,surname:"Duriagina",slug:"zoia-duriagina",fullName:"Zoia Duriagina"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7232",title:"Magnesium Alloys",subtitle:"Selected Issue",isOpenForSubmission:!1,hash:"968e7fbf2920c8d89c013c5a8be0dbb3",slug:"magnesium-alloys-selected-issue",bookSignature:"Tomasz Tański, Wojciech Borek and Mariusz Król",coverURL:"https://cdn.intechopen.com/books/images_new/7232.jpg",editedByType:"Edited by",editors:[{id:"15700",title:"Prof.",name:"Tomasz Arkadiusz",middleName:null,surname:"Tański",slug:"tomasz-arkadiusz-tanski",fullName:"Tomasz Arkadiusz Tański"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6726",title:"Metallic Glasses",subtitle:"Properties and Processing",isOpenForSubmission:!1,hash:"a16db3e7e34f021f5b42c2d1dc354a5a",slug:"metallic-glasses-properties-and-processing",bookSignature:"Hu Huang",coverURL:"https://cdn.intechopen.com/books/images_new/6726.jpg",editedByType:"Edited by",editors:[{id:"35374",title:"Prof.",name:"Hu",middleName:null,surname:"Huang",slug:"hu-huang",fullName:"Hu Huang"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6132",title:"Advanced Casting Technologies",subtitle:null,isOpenForSubmission:!1,hash:"f2da423c1b74b321e5302adaaf888495",slug:"advanced-casting-technologies",bookSignature:"T.R. Vijayaram",coverURL:"https://cdn.intechopen.com/books/images_new/6132.jpg",editedByType:"Edited by",editors:[{id:"139338",title:"Prof.",name:"Thoguluva",middleName:"Raghavan",surname:"Vijayaram",slug:"thoguluva-vijayaram",fullName:"Thoguluva Vijayaram"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6071",title:"Aluminium Alloys",subtitle:"Recent Trends in Processing, Characterization, Mechanical behavior and Applications",isOpenForSubmission:!1,hash:"fcc00ef303e29cf8724bb8c83601b2d3",slug:"aluminium-alloys-recent-trends-in-processing-characterization-mechanical-behavior-and-applications",bookSignature:"Subbarayan Sivasankaran",coverURL:"https://cdn.intechopen.com/books/images_new/6071.jpg",editedByType:"Edited by",editors:[{id:"190989",title:"Dr.",name:"Subbarayan",middleName:null,surname:"Sivasankaran",slug:"subbarayan-sivasankaran",fullName:"Subbarayan Sivasankaran"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6057",title:"Austenitic Stainless Steels",subtitle:"New Aspects",isOpenForSubmission:!1,hash:"9d535d6a795541ead4919f3fcfa82ff0",slug:"austenitic-stainless-steels-new-aspects",bookSignature:"Wojciech Borek, Tomasz Tanski and Zbigniew Brytan",coverURL:"https://cdn.intechopen.com/books/images_new/6057.jpg",editedByType:"Edited by",editors:[{id:"186373",title:"Dr.",name:"Wojciech",middleName:null,surname:"Borek",slug:"wojciech-borek",fullName:"Wojciech Borek"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6020",title:"Shape Memory Alloys",subtitle:"Fundamentals and Applications",isOpenForSubmission:!1,hash:"89ba319783170fefc256fcfa0613a6c0",slug:"shape-memory-alloys-fundamentals-and-applications",bookSignature:"Farzad Ebrahim",coverURL:"https://cdn.intechopen.com/books/images_new/6020.jpg",editedByType:"Edited by",editors:[{id:"20062",title:"Dr.",name:"Farzad",middleName:null,surname:"Ebrahimi",slug:"farzad-ebrahimi",fullName:"Farzad Ebrahimi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:42,seriesByTopicCollection:[],seriesByTopicTotal:0,mostCitedChapters:[{id:"46243",doi:"10.5772/57255",title:"Corrosion Inhibitors – Principles, Mechanisms and Applications",slug:"corrosion-inhibitors-principles-mechanisms-and-applications",totalDownloads:13693,totalCrossrefCites:40,totalDimensionsCites:159,abstract:null,book:{id:"3817",slug:"developments-in-corrosion-protection",title:"Developments in Corrosion Protection",fullTitle:"Developments in Corrosion Protection"},signatures:"Camila G. Dariva and Alexandre F. Galio",authors:[{id:"169261",title:"Dr.",name:"Camila",middleName:"G.",surname:"Dariva",slug:"camila-dariva",fullName:"Camila Dariva"},{id:"170138",title:"Dr.",name:"Alexandre",middleName:"Ferreira",surname:"Galio",slug:"alexandre-galio",fullName:"Alexandre Galio"}]},{id:"44359",doi:"10.5772/56197",title:"Microstructure and Mechanical Properties of High Strength Two-Phase Titanium Alloys",slug:"microstructure-and-mechanical-properties-of-high-strength-two-phase-titanium-alloys",totalDownloads:10278,totalCrossrefCites:55,totalDimensionsCites:127,abstract:null,book:{id:"3494",slug:"titanium-alloys-advances-in-properties-control",title:"Titanium Alloys",fullTitle:"Titanium Alloys - Advances in Properties Control"},signatures:"J. Sieniawski, W. Ziaja, K. Kubiak and M. Motyka",authors:[{id:"101690",title:"Associate Prof.",name:"Maciej",middleName:null,surname:"Motyka",slug:"maciej-motyka",fullName:"Maciej Motyka"},{id:"109232",title:"Prof.",name:"Jan",middleName:null,surname:"Sieniawski",slug:"jan-sieniawski",fullName:"Jan Sieniawski"}]},{id:"46882",doi:"10.5772/58534",title:"Additive Manufacturing of Al Alloys and Aluminium Matrix Composites (AMCs)",slug:"additive-manufacturing-of-al-alloys-and-aluminium-matrix-composites-amcs-",totalDownloads:10093,totalCrossrefCites:52,totalDimensionsCites:117,abstract:null,book:{id:"3844",slug:"light-metal-alloys-applications",title:"Light Metal Alloys Applications",fullTitle:"Light Metal Alloys Applications"},signatures:"Diego Manfredi, Flaviana Calignano, Manickavasagam Krishnan,\nRiccardo Canali, Elisa Paola Ambrosio, Sara Biamino, Daniele Ugues,\nMatteo Pavese and Paolo Fino",authors:[{id:"16648",title:"Dr.",name:"Diego",middleName:null,surname:"Manfredi",slug:"diego-manfredi",fullName:"Diego Manfredi"},{id:"18978",title:"Dr.",name:"Matteo",middleName:null,surname:"Pavese",slug:"matteo-pavese",fullName:"Matteo Pavese"},{id:"19187",title:"Dr.",name:"Sara",middleName:null,surname:"Biamino",slug:"sara-biamino",fullName:"Sara Biamino"},{id:"19188",title:"Dr.",name:"Elisa",middleName:null,surname:"Ambrosio",slug:"elisa-ambrosio",fullName:"Elisa Ambrosio"},{id:"19189",title:"Dr.",name:"Paolo",middleName:null,surname:"Fino",slug:"paolo-fino",fullName:"Paolo Fino"},{id:"170227",title:"Dr.",name:"Flaviana",middleName:null,surname:"Calignano",slug:"flaviana-calignano",fullName:"Flaviana Calignano"},{id:"170228",title:"MSc.",name:"Riccardo",middleName:null,surname:"Canali",slug:"riccardo-canali",fullName:"Riccardo Canali"},{id:"170229",title:"MSc.",name:"Manickavasagam",middleName:null,surname:"Krishnan",slug:"manickavasagam-krishnan",fullName:"Manickavasagam Krishnan"}]},{id:"41099",doi:"10.5772/53752",title:"Durability and Corrosion of Aluminium and Its Alloys: Overview, Property Space, Techniques and Developments",slug:"durability-and-corrosion-of-aluminium-and-its-alloys-overview-property-space-techniques-and-developm",totalDownloads:8035,totalCrossrefCites:21,totalDimensionsCites:74,abstract:null,book:{id:"3053",slug:"aluminium-alloys-new-trends-in-fabrication-and-applications",title:"Aluminium Alloys",fullTitle:"Aluminium Alloys - New Trends in Fabrication and Applications"},signatures:"N. L. Sukiman, X. Zhou, N. Birbilis, A.E. Hughes, J. M. C. Mol, S. J. Garcia, X. Zhou and G. E. Thompson",authors:[{id:"43567",title:"Prof.",name:"Nick",middleName:null,surname:"Birbilis",slug:"nick-birbilis",fullName:"Nick Birbilis"}]},{id:"24059",doi:"10.5772/18766",title:"High Strength Al-Alloys: Microstructure, Corrosion and Principles of Protection",slug:"high-strength-al-alloys-microstructure-corrosion-and-principles-of-protection",totalDownloads:6877,totalCrossrefCites:9,totalDimensionsCites:56,abstract:null,book:{id:"217",slug:"recent-trends-in-processing-and-degradation-of-aluminium-alloys",title:"Recent Trends in Processing and Degradation of Aluminium Alloys",fullTitle:"Recent Trends in Processing and Degradation of Aluminium Alloys"},signatures:"Anthony E. Hughes, Nick Birbilis, Johannes M.C. Mol, Santiago J. Garcia, Xiaorong Zhou and George E. Thompson",authors:[{id:"43567",title:"Prof.",name:"Nick",middleName:null,surname:"Birbilis",slug:"nick-birbilis",fullName:"Nick Birbilis"},{id:"32486",title:"Prof.",name:"Anthony",middleName:"E",surname:"Hughes",slug:"anthony-hughes",fullName:"Anthony Hughes"},{id:"43568",title:"Prof.",name:"Arjan",middleName:null,surname:"Mol",slug:"arjan-mol",fullName:"Arjan Mol"},{id:"43569",title:"Prof.",name:"Santiago",middleName:null,surname:"Garcia Espallargas",slug:"santiago-garcia-espallargas",fullName:"Santiago Garcia Espallargas"},{id:"43570",title:"Prof.",name:"Xiaorang",middleName:null,surname:"Zhou",slug:"xiaorang-zhou",fullName:"Xiaorang Zhou"},{id:"83528",title:"Prof.",name:"George",middleName:null,surname:"Thompson",slug:"george-thompson",fullName:"George Thompson"}]}],mostDownloadedChaptersLast30Days:[{id:"12751",title:"Contemporary Forming Methods of the Structure and Properties of Cast Magnesium Alloys",slug:"contemporary-forming-methods-of-the-structure-and-properties-of-cast-magnesium-alloys",totalDownloads:3085,totalCrossrefCites:0,totalDimensionsCites:0,abstract:null,book:{id:"27",slug:"magnesium-alloys-design-processing-and-properties",title:"Magnesium Alloys",fullTitle:"Magnesium Alloys - Design, Processing and Properties"},signatures:"Leszek A. Dobrzański, Tomasz Tański, Szymon Malara, Mariusz Król and Justyna Domagała-dubiel",authors:[{id:"15700",title:"Prof.",name:"Tomasz Arkadiusz",middleName:null,surname:"Tański",slug:"tomasz-arkadiusz-tanski",fullName:"Tomasz Arkadiusz Tański"},{id:"15880",title:"Prof.",name:"Leszek A.",middleName:null,surname:"Dobrzański",slug:"leszek-a.-dobrzanski",fullName:"Leszek A. Dobrzański"},{id:"15882",title:"MSc.",name:"Szymon",middleName:null,surname:"Malara",slug:"szymon-malara",fullName:"Szymon Malara"},{id:"15883",title:"Dr.",name:"Mariusz",middleName:null,surname:"Król",slug:"mariusz-krol",fullName:"Mariusz Król"},{id:"142678",title:"Dr.",name:"Justyna",middleName:null,surname:"Domagała-Dubiel",slug:"justyna-domagala-dubiel",fullName:"Justyna Domagała-Dubiel"}]},{id:"74167",title:"Solidification of Metals and Alloys",slug:"solidification-of-metals-and-alloys",totalDownloads:1163,totalCrossrefCites:2,totalDimensionsCites:2,abstract:"In order to analyse the process of solidification of metals and alloys critically, it is most pertinent to understand the different modes of nucleation and the uneven rates of growth throughout the melt. It is also important to take a note of the constraints in the growth process that definitely influence the crystal structure and the structure related properties of the casting. The freezing pattern of the liquid melt decides the feeding of the mould which is instrumental in producing a complete and compact casting. For pure metals and even in case of alloys with a narrow freezing range a well defined solid–liquid macro-interface exists. Here feeding of the solidifying casting is the easiest, by the common lowering of the liquid metal surface in the mould. However, in many instances, a well defined interface is not witnessed. The solid–liquid interface could be discrete and not continuous. Here process of feeding the solidification sites that witness considerable shrinkages, may become complicated. On grounds of above it is implied, the process of solidification constitutes an important aspects in the production of a defect free casting.",book:{id:"10432",slug:"casting-processes-and-modelling-of-metallic-materials",title:"Casting Processes and Modelling of Metallic Materials",fullTitle:"Casting Processes and Modelling of Metallic Materials"},signatures:"Upendra Kumar Mohanty and Hrushikesh Sarangi",authors:[{id:"328540",title:"Prof.",name:"Hrushikesh",middleName:null,surname:"Sarangi",slug:"hrushikesh-sarangi",fullName:"Hrushikesh Sarangi"},{id:"328543",title:"Prof.",name:"Upendra Kumar",middleName:null,surname:"Mohanty",slug:"upendra-kumar-mohanty",fullName:"Upendra Kumar Mohanty"}]},{id:"48856",title:"Silicon Carbide in Microsystem Technology — Thin Film Versus Bulk Material",slug:"silicon-carbide-in-microsystem-technology-thin-film-versus-bulk-material",totalDownloads:2868,totalCrossrefCites:4,totalDimensionsCites:10,abstract:"This chapter looks at the role of silicon carbide (SiC) in microsystem technology. It starts with an introduction into the wide bandgap (WBG) materials and the properties that make them potential candidates to enable the development of harsh environment microsystems. The future commercial success of WBG microsystems depends mainly on the availability of high-quality materials, well-established microfabrication processes, and economic viability. In such aspects SiC platform, in relation to other WBG materials, provides a clear and competitive advantage. The reasons for this will be detailed. Furthermore, the current status of the SiC thin film and bulk material technologies will also be discussed. Both SiC material forms have played important roles in different microsystem types.",book:{id:"4721",slug:"advanced-silicon-carbide-devices-and-processing",title:"Advanced Silicon Carbide Devices and Processing",fullTitle:"Advanced Silicon Carbide Devices and Processing"},signatures:"Mariana Amorim Fraga, Matteo Bosi and Marco Negri",authors:[{id:"9292",title:"Dr.",name:"matteo",middleName:null,surname:"bosi",slug:"matteo-bosi",fullName:"matteo bosi"},{id:"38456",title:"Dr.",name:"Mariana",middleName:null,surname:"Amorim Fraga",slug:"mariana-amorim-fraga",fullName:"Mariana Amorim Fraga"},{id:"175671",title:"MSc.",name:"Marco",middleName:null,surname:"Negri",slug:"marco-negri",fullName:"Marco Negri"}]},{id:"46237",title:"Corrosion Resistance Through the Application of Anti- Corrosion Coatings",slug:"corrosion-resistance-through-the-application-of-anti-corrosion-coatings",totalDownloads:7361,totalCrossrefCites:11,totalDimensionsCites:32,abstract:null,book:{id:"3817",slug:"developments-in-corrosion-protection",title:"Developments in Corrosion Protection",fullTitle:"Developments in Corrosion Protection"},signatures:"Api Popoola, OE Olorunniwo and OO Ige",authors:[{id:"169258",title:"Dr.",name:"Patricia",middleName:null,surname:"Popoola",slug:"patricia-popoola",fullName:"Patricia Popoola"}]},{id:"46235",title:"Corrosion Detection for Automated Visual Inspection",slug:"corrosion-detection-for-automated-visual-inspection",totalDownloads:3471,totalCrossrefCites:18,totalDimensionsCites:31,abstract:null,book:{id:"3817",slug:"developments-in-corrosion-protection",title:"Developments in Corrosion Protection",fullTitle:"Developments in Corrosion Protection"},signatures:"Francisco Bonnin-Pascual and Alberto Ortiz",authors:[{id:"124589",title:"Prof.",name:"Alberto",middleName:null,surname:"Ortiz",slug:"alberto-ortiz",fullName:"Alberto Ortiz"},{id:"169256",title:"Ph.D. Student",name:"Francisco",middleName:null,surname:"Bonnin-Pascual",slug:"francisco-bonnin-pascual",fullName:"Francisco Bonnin-Pascual"}]}],onlineFirstChaptersFilter:{topicId:"944",limit:6,offset:0},onlineFirstChaptersCollection:[{id:"81709",title:"New-Age Al-Cu-Mn-Zr (ACMZ) Alloy for High Temperature-High Strength Applications: A Review",slug:"new-age-al-cu-mn-zr-acmz-alloy-for-high-temperature-high-strength-applications-a-review",totalDownloads:17,totalDimensionsCites:0,doi:"10.5772/intechopen.104533",abstract:"One of the prime challenges with age hardened Al-Cu alloys is the strength degradation at high temperatures (above ∼250°C) due to the coarsening of strengthening θ′ precipitates and associated metastable θ′ → stable θ phase transformation. A recent discovery suggests that micro-alloying with Manganese (Mn) and Zirconium (Zr) can synergistically restrict θ′ precipitate coarsening, thereby rendering an excellent high temperature stability for Al-Cu-Mn-Zr (ACMZ) alloys. The θ′ precipitates are stabilized primarily from the reduction of interfacial energy by preferential solute segregation (Mn & Zr) at θ′ precipitate/α-Al matrix interfaces. The Al-Cu-Mn-Zr alloys thereby exhibit excellent high temperature hardness and tensile properties (yield and ultimate tensile strength) in addition to superior fatigue life and creep resistance. This newly developed Al-Cu-Mn-Zr alloys also showed excellent hot tearing resistance compared to the conventional cast Al-Cu alloys so much so that it meets the industrial standards as well. These alloys also have promising manufacturing possibility by additive route. Overall, Al-Cu-Mn-Zr alloys offer great potential for the automotive industry because of their unprecedented high temperature performance which should enable engineers to build light weight passenger vehicles leading to a safer and greener environment.",book:{id:"10847",title:"Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications",coverURL:"https://cdn.intechopen.com/books/images_new/10847.jpg"},signatures:"Samarendra Roy and Shibayan Roy"},{id:"80372",title:"Application of the Aluminothermic Reduction Process for Magnesium Removal in Aluminum Scrap",slug:"application-of-the-aluminothermic-reduction-process-for-magnesium-removal-in-aluminum-scrap",totalDownloads:16,totalDimensionsCites:0,doi:"10.5772/intechopen.102407",abstract:"Magnesium is considered as impurity element in aluminum recycled for obtaining some cast alloys, with low concentration Mg, because at 0.1 wt% results in fragility, fractures, and defects. This research applies the aluminothermic reduction process to decrease magnesium content in aluminum cans by adding ZnO, to produce reaction products solid-state (Al2O3, MgO and MgAl2O4), and there is a possibility to obtain Al-Zn alloy. The conditions of the process were, melting temperature (750, 800, 850°C) and stirring velocity (200, 250, 300 rpm). The Mg and Zn contents were measured for chemical analysis and scrap generated from every process was analyzed by X-ray diffraction. The results show how the aluminothermic reduction decreased Mg from 0.93 to 0.06 wt% and increased zinc up to 5.52wt % in the molten metal. Therefore, this process can be used to remove Mg and can also prevent the generation of polluting gases into the environment.",book:{id:"10847",title:"Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications",coverURL:"https://cdn.intechopen.com/books/images_new/10847.jpg"},signatures:"Rocio Maricela Ochoa Palacios, Citlaly Castillo Rodriguez, Jesus Torres Torres, Perla Janet Resendiz Hernandez and Alfredo Flores Valdes"},{id:"80920",title:"Drilling of 7075 Aluminum Alloys",slug:"drilling-of-7075-aluminum-alloys",totalDownloads:51,totalDimensionsCites:0,doi:"10.5772/intechopen.102864",abstract:"Aluminum alloy (Al 7075) has been increasingly used as structural components in automotive and aerospace industry due to their low density, high strength and good corrosion resistance compared with other metals. To manufacture and assemble the components, drilling operations are often conducted. However, Al 7075 is ductile and soft, which causes difficulty in drilling, resulting in material adhesion, high tool wear, short tool life and poor hole quality. As a result of the poor hole quality, there is a high percentage of part rejection, which can increase the manufacturing time and cost. This chapter discusses challenges and techniques to drill Al 7075 in terms of the cutting parameters and drilling conditions to prolong the tool life and achieve good hole quality. Drilling experiments on Al 7075-T6 (heat-treated) were conducted using carbide cutting tools at various cutting parameters. Reducing cutting speed and increasing feed rate resulted in reducing tool wear, whereas a reduction in surface roughness, hence improved machined surface finish, was found when both cutting speed and feed rate were reduced in drilling Al 7075-T6. Producing good hole quality is vital during the drilling process to ensure a good assembly and product service performance.",book:{id:"10847",title:"Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications",coverURL:"https://cdn.intechopen.com/books/images_new/10847.jpg"},signatures:"Aishah Najiah Dahnel, Mohamad Noor Ikhwan Naiman, Muhammad Azim Mirza Mohd Farid, Ahmad Faris Abdul Rahman and Nur Munirah Meera Mydin"},{id:"79869",title:"Assisting Liquid Phase Sintering of Pure Aluminum (Al) by the Tin Addition",slug:"assisting-liquid-phase-sintering-of-pure-aluminum-al-by-the-tin-addition",totalDownloads:102,totalDimensionsCites:0,doi:"10.5772/intechopen.101507",abstract:"In the present study, the addition of tin (Sn) to the pure Al system was done, and its effects on the morphology, density, and compressive yield strength of pure Al were analyzed systematically. In this context, the morphology of sintered Al revealed enhanced wettability and sintering response between Al particles with increased Sn content. Moreover, physical characteristics of sintered Al alloys demonstrated oxidation phenomenon (black color specimen) with the lowest Sn content of 1.5 weight percent (wt.%), in which a higher Sn content of 2 and 2.5 wt.% produced silver color specimens, implying a reduction in oxidation. Additionally, densification of sintered Al alloys was greatly promoted with increased Sn contents, suggesting effective wetting as confirmed by the previous morphological observations. Similarly, the compressive yield strength of sintered Al alloys improved with increased Sn content which might be due to the enhanced inter-particle contacts between Al particles and sufficient wetting by molten Sn. Based on the results obtained, the introduction of Sn powder at various contents improved the sintering response of pure Al powder by providing sufficient liquid-phase sintering. Therefore, the sintered Al alloys had enhanced the morphological, densification, physical characteristics, and compressive yield strength.",book:{id:"10847",title:"Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications",coverURL:"https://cdn.intechopen.com/books/images_new/10847.jpg"},signatures:"Nur Ayuni Jamal, Farazila Yusof, Yusilawati Ahmad, Norhuda Hidayah Nordin and Suraya Sulaiman"},{id:"79459",title:"Characteristics of Al-Mg Test Pieces with Fe Impurities Fabricated by Die Casting, Roll Casting, and Hot Forging",slug:"characteristics-of-al-mg-test-pieces-with-fe-impurities-fabricated-by-die-casting-roll-casting-and-h",totalDownloads:64,totalDimensionsCites:0,doi:"10.5772/intechopen.100940",abstract:"The suitability of Al-Mg alloys for recycling was investigated using energy-saving processes. The Al-Mg alloy is a non-heat-treatable alloy and has the advantage of energy saving in comparison with heat-treatable alloys. Al-Mg alloys with Mg contents ranging from 4.5–10% were tested. Die casting, cast-forging, and roll casting were selected as energy-saving processes, as they have the advantage of process saving. A single-roll caster equipped with a scraper was used as the roll-caster. Fe was added to the Al-Mg alloys at contents of 0.2%, 0.4%, 0.6%, and 0.8% to model recycled alloys used in automobile manufacture. In the selected processes, the tensile stress and 0.2% proof stress of the Al-Mg alloys were little influenced by the added Fe content, whereas the elongation tended to decrease as the Fe content increased. The process influenced the degree to which the Fe content affected the elongation, and it was found that a suitable Mg content for recycling depends on the target process.",book:{id:"10847",title:"Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications",coverURL:"https://cdn.intechopen.com/books/images_new/10847.jpg"},signatures:"Toshio Haga"},{id:"79154",title:"Development and Characterization of New Functionally Graded Aluminium Alloys",slug:"development-and-characterization-of-new-functionally-graded-aluminium-alloys",totalDownloads:108,totalDimensionsCites:0,doi:"10.5772/intechopen.101022",abstract:"Nowadays, aluminium alloys are adopted mainly to produce engineering and automotive components. The present investigation aims to design, cast and characterize novel functionally graded materials (FGMs) produced using Al-Mg and Al-Si alloys by gravity casting technique. Alloys were sequentially cast into a mould to obtain an FGM to realizing great mechanical and metallurgical bonding. Zn addition was further performed in FGM to increase the mechanical properties, thanks to the nucleation of the intermetallic phases MgZn2. Castings were subsequently mechanically tested by tensile tests, bending tests, hardness and microhardness measures to assess the products\\' quality. Microstructural characterizations were performed along the FGM to assess the metallurgical bonding and evaluate the microstructures obtained. Fracture, microstructural and compositional analysis will highlight the quality of this new FGM proposed. Possible applications of these materials are suggested, as automotive pistons or structural components.",book:{id:"10847",title:"Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications",coverURL:"https://cdn.intechopen.com/books/images_new/10847.jpg"},signatures:"Elisa Fracchia and Mario Rosso"}],onlineFirstChaptersTotal:8},preDownload:{success:null,errors:{}},subscriptionForm:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[],offset:8,limit:8,total:0},allSeries:{pteSeriesList:[{id:"14",title:"Artificial Intelligence",numberOfPublishedBooks:9,numberOfPublishedChapters:90,numberOfOpenTopics:6,numberOfUpcomingTopics:0,issn:"2633-1403",doi:"10.5772/intechopen.79920",isOpenForSubmission:!0},{id:"7",title:"Biomedical Engineering",numberOfPublishedBooks:12,numberOfPublishedChapters:104,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2631-5343",doi:"10.5772/intechopen.71985",isOpenForSubmission:!0}],lsSeriesList:[{id:"11",title:"Biochemistry",numberOfPublishedBooks:32,numberOfPublishedChapters:319,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2632-0983",doi:"10.5772/intechopen.72877",isOpenForSubmission:!0},{id:"25",title:"Environmental Sciences",numberOfPublishedBooks:1,numberOfPublishedChapters:12,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2754-6713",doi:"10.5772/intechopen.100362",isOpenForSubmission:!0},{id:"10",title:"Physiology",numberOfPublishedBooks:11,numberOfPublishedChapters:141,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2631-8261",doi:"10.5772/intechopen.72796",isOpenForSubmission:!0}],hsSeriesList:[{id:"3",title:"Dentistry",numberOfPublishedBooks:8,numberOfPublishedChapters:133,numberOfOpenTopics:2,numberOfUpcomingTopics:0,issn:"2631-6218",doi:"10.5772/intechopen.71199",isOpenForSubmission:!0},{id:"6",title:"Infectious Diseases",numberOfPublishedBooks:13,numberOfPublishedChapters:113,numberOfOpenTopics:3,numberOfUpcomingTopics:1,issn:"2631-6188",doi:"10.5772/intechopen.71852",isOpenForSubmission:!0},{id:"13",title:"Veterinary Medicine and Science",numberOfPublishedBooks:11,numberOfPublishedChapters:107,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2632-0517",doi:"10.5772/intechopen.73681",isOpenForSubmission:!0}],sshSeriesList:[{id:"22",title:"Business, Management and Economics",numberOfPublishedBooks:1,numberOfPublishedChapters:19,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2753-894X",doi:"10.5772/intechopen.100359",isOpenForSubmission:!0},{id:"23",title:"Education and Human Development",numberOfPublishedBooks:0,numberOfPublishedChapters:5,numberOfOpenTopics:1,numberOfUpcomingTopics:1,issn:null,doi:"10.5772/intechopen.100360",isOpenForSubmission:!0},{id:"24",title:"Sustainable Development",numberOfPublishedBooks:0,numberOfPublishedChapters:16,numberOfOpenTopics:5,numberOfUpcomingTopics:0,issn:null,doi:"10.5772/intechopen.100361",isOpenForSubmission:!0}],testimonialsList:[{id:"6",text:"It is great to work with the IntechOpen to produce a worthwhile collection of research that also becomes a great educational resource and guide for future research endeavors.",author:{id:"259298",name:"Edward",surname:"Narayan",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/259298/images/system/259298.jpeg",slug:"edward-narayan",institution:{id:"3",name:"University of Queensland",country:{id:null,name:"Australia"}}}},{id:"13",text:"The collaboration with and support of the technical staff of IntechOpen is fantastic. The whole process of submitting an article and editing of the submitted article goes extremely smooth and fast, the number of reads and downloads of chapters is high, and the contributions are also frequently cited.",author:{id:"55578",name:"Antonio",surname:"Jurado-Navas",institutionString:null,profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRisIQAS/Profile_Picture_1626166543950",slug:"antonio-jurado-navas",institution:{id:"720",name:"University of Malaga",country:{id:null,name:"Spain"}}}}]},series:{item:{id:"24",title:"Sustainable Development",doi:"10.5772/intechopen.100361",issn:null,scope:"