TY - CHAP AU - Ghayour Reza ED - Amimul Ahsan Y1 - 2011-09-26 PY - 2011 T1 - Heat Transfer in Micro Direct Methanol Fuel Cell N2 - The heat transfer and analysis on laser beam, evaporator coils, shell-and-tube condenser, two phase flow, nanofluids, complex fluids, and on phase change are significant issues in a design of wide range of industrial processes and devices. This book includes 25 advanced and revised contributions, and it covers mainly (1) numerical modeling of heat transfer, (2) two phase flow, (3) nanofluids, and (4) phase change. The first section introduces numerical modeling of heat transfer on particles in binary gas-solid fluidization bed, solidification phenomena, thermal approaches to laser damage, and temperature and velocity distribution. The second section covers density wave instability phenomena, gas and spray-water quenching, spray cooling, wettability effect, liquid film thickness, and thermosyphon loop. The third section includes nanofluids for heat transfer, nanofluids in minichannels, potential and engineering strategies on nanofluids, and heat transfer at nanoscale. The forth section presents time-dependent melting and deformation processes of phase change material (PCM), thermal energy storage tanks using PCM, phase change in deep CO2 injector, and thermal storage device of solar hot water system. The advanced idea and information described here will be fruitful for the readers to find a sustainable solution in an industrialized society. BT - Two Phase Flow, Phase Change and Numerical Modeling SP - Ch. 21 UR - https://doi.org/10.5772/21563 DO - 10.5772/21563 SN - PB - IntechOpen CY - Rijeka Y2 - 2024-03-28 ER -