Open access peer-reviewed Edited Volume

Wind Turbines

Design, Control and Applications

Edited by Abdel Ghani Aissaoui

University of Béchar

Co-editor:

Ahmed Tahour

Université Mustapha Stambouli de Mascara

Renewable energies constitute excellent solutions to both the increase of energy consumption and environment problems. Among these energies, wind energy is very interesting. Wind energy is the subject of advanced research. In the development of wind turbine, the design of its different structures is very important. It will ensure: the robustness of the system, the energy efficiency, the optimal cost and the high reliability. The use of advanced control technology and new technology products allows bringing the wind energy conversion system in its optimal operating mode. Different strategies of control can be applied on generators, systems relating to blades, etc. in order to extract maximal power from the wind. The goal of this book is to present recent works on design, control and applications in wind energy conversion systems.

Read more >Order hardcopy
IntechOpen
Wind TurbinesDesign, Control and ApplicationsEdited by Abdel Ghani Aissaoui

Published: July 27th 2016

DOI: 10.5772/61672

ISBN: 978-953-51-2496-2

Print ISBN: 978-953-51-2495-5

Copyright year: 2016

Books open for chapter submissions

17925 Total Chapter Downloads

20 Crossref Citations

1 Web of Science Citations

31 Dimensions Citations

chaptersDownloads

Open access peer-reviewed

1. Composite Blades of Wind Turbine: Design, Stress Analysis, Aeroelasticity, and Fatigue

By Ahmad Reza Ghasemi and Masood Mohandes

2416

Open access peer-reviewed

2. A Review of Wind Turbine Yaw Aerodynamics

By Daniel Micallef and Tonio Sant

1567

Open access peer-reviewed

3. Low‐Noise Airfoil and Wind Turbine Design

By Wei Jun Zhu, Wen Zhong Shen and Jens Nørkær Sørensen

1301

Open access peer-reviewed

4. Small Wind Turbines: Specification, Design, and Economic Evaluation

By Jakub Bukala, Krzysztof Damaziak, Krzysztof Kroszczynski, Jerzy Malachowski, Tomasz Szafranski, Michal Tomaszewski, Hamid R. Karimi, Krzysztof Jozwik, Maciej Karczewski and Krzysztof Sobczak

2387

Open access peer-reviewed

5. Design of a Low‐Cost Permanent Synchronous Machine for Isolated Wind Conversion Systems

By Florin‐Nicolae Jurca

1080

Open access peer-reviewed

6. Wind Turbine Design: Multi‐Objective Optimization

By Adam Chehouri, Rafic Younes, Adrian Ilinca and Jean Perron

758

Open access peer-reviewed

7. Methodology for the Low-Cost Optimisation of Small-Wind Turbines

By Alberto Arroyo, Mario Manana, Pablo B. Castro, Raquel Martinez, Ramon Lecuna and Juan Carcedo

671

Open access peer-reviewed

8. Emulation of Wind Turbines

By Diana Martinello, Emerson G. Carati, Jean P. da Costa, Rafael Cardoso and Carlos M. O. Stein

1102

Open access peer-reviewed

9. A Maximum Power Point Tracking Control Algorithms for a PMSG‐based WECS for Isolated Applications: Critical Review

By Karim Belmokhtar, Hussein Ibrahim and Mamadou Lamine Doumbia

1616

Open access peer-reviewed

10. Wind‐Driven Self‐Excited Reluctance Generator for Rural Electrification

By Ayodeji S.O. Ogunjuyigbe, Temitope R. Ayodele, Bukola B. Adetokun and Adisa A. Jimoh

682

Open access peer-reviewed

11. Control and Estimation of a Variable Pitch Wind Turbine for Maximum Power Point Tracking

By Ranjan Vepa

1210

Open access peer-reviewed

12. Standard Calculation of Fault Current Contribution of Doubly Fed Induction Generator-Based Wind Turbine

By Ahmed El-Naggar

858

Open access peer-reviewed

13. Active Flow Control of Wind Turbine Blades

By Victor Maldonado

1230

Open access peer-reviewed

14. Experimental Investigation of Power Requirements for Wind Turbines Electrothermal Anti-icing Systems

By Oloufemi Fakorede, Hussein Ibrahim, Adrian Ilinca and Jean Perron

1047

Edited Volume and chapters are indexed in

  • Worldcat
  • OpenAIRE
  • Google Scholar
  • AZ ebsco
  • Base
  • CNKI
  • IET Inspec

Order a hardcopy of the Edited Volume

Free shipping with DHL Express

Hardcover (ex. VAT)£170

Order now

Residents of European Union countries need to add a Book Value-Added Tax of 5%. Institutions and companies, registered as VAT taxable entities in their own EU member state, will not pay VAT by providing IntechOpen with their VAT registration number. This is made possible by the EU reverse charge method.

Special discount for IntechOpen contributors

All IntechOpen contributors are offered special discounts starting at 40% OFF available through your personal dashboard

Login and purchase