Open access peer-reviewed Edited volume

Two Phase Flow, Phase Change and Numerical Modeling

Edited by Amimul Ahsan

Swinburne University of Technology

The heat transfer and analysis on laser beam, evaporator coils, shell-and-tube condenser, two phase flow, nanofluids, complex fluids, and on phase change are significant issues in a design of wide range of industrial processes and devices. This book includes 25 advanced and revised contributions, and it covers mainly (1) numerical modeling of heat transfer, (2) two phase flow, (3) nanofluids, and (4) phase change. The first section introduces numerical modeling of heat transfer on particles in binary gas-solid fluidization bed, solidification phenomena, thermal approaches to laser damage, and temperature and velocity distribution. The second section covers density wave instability phenomena, gas and spray-water quenching, spray cooling, wettability effect, liquid film thickness, and thermosyphon loop. The third section includes nanofluids for heat transfer, nanofluids in minichannels, potential and engineering strategies on nanofluids, and heat transfer at nanoscale. The forth section presents time-dependent melting and deformation processes of phase change material (PCM), thermal energy storage tanks using PCM, phase change in deep CO2 injector, and thermal storage device of solar hot water system. The advanced idea and information described here will be fruitful for the readers to find a sustainable solution in an industrialized society.

Read more >Order hardcopy
IntechOpen
Two Phase Flow, Phase Change and Numerical ModelingEdited by Amimul Ahsan

Published: September 26th 2011

DOI: 10.5772/1043

ISBN: 978-953-307-584-6

Copyright year: 2011

Books open for chapter submissions

80566 Total Chapter Downloads

14 Crossref Citations

35 Web of Science Citations

52 Dimensions Citations

chaptersDownloads

Open access peer-reviewed

1. Modeling the Physical Phenomena Involved by Laser Beam – Substance Interaction

By Marian Pearsica, Stefan Nedelcu, Cristian-George Constantinescu, Constantin Strimbu, Marius Benta and Catalin Mihai

1081

Open access peer-reviewed

2. Numerical Modeling and Experimentation on Evaporator Coils for Refrigeration in Dry and Frosting Operational Conditions

By Zine Aidoun, Mohamed Ouzzane and Adlane Bendaoud

8256

Open access peer-reviewed

3. Modeling and Simulation of the Heat Transfer Behaviour of a Shell-and-Tube Condenser for a Moderately High-Temperature Heat Pump

By Tzong-Shing Lee and Jhen-Wei Mai

6711

Open access peer-reviewed

4. Simulation of Rarefied Gas Between Coaxial Circular Cylinders by DSMC Method

By H. Ghezel Sofloo

1621

Open access peer-reviewed

5. Theoretical and Experimental Analysis of Flows and Heat Transfer Within Flat Mini Heat Pipe Including Grooved Capillary Structures

By Zaghdoudi Mohamed Chaker, Maalej Samah and Mansouri Jed

2239

Open access peer-reviewed

6. Modeling Solidification Phenomena in the Continuous Casting of Carbon Steels

By Panagiotis Sismanis

5035

Open access peer-reviewed

7. Modelling of Profile Evolution by Transport Transitions in Fusion Plasmas

By Mikhail Tokar

1241

Open access peer-reviewed

8. Numerical Simulation of the Heat Transfer from a Heated Solid Wall to an Impinging Swirling Jet

By Joaquín Ortega-Casanova

1858

Open access peer-reviewed

9. Recent Advances in Modeling Axisymmetric Swirl and Applications for Enhanced Heat Transfer and Flow Mixing

By Sal B. Rodriguez and Mohamed S. El-Genk

2039

Open access peer-reviewed

10. Thermal Approaches to Interpret Laser Damage Experiments

By S. Reyné, L. Lamaignère, J-Y. Natoli and G. Duchateau

1016

Open access peer-reviewed

11. Ultrafast Heating Characteristics in Multi-Layer Metal Film Assembly Under Femtosecond Laser Pulses Irradiation

By Feng Chen, Guangqing Du, Qing Yang, Jinhai Si and Hun Hou

1952

Open access peer-reviewed

12. On Density Wave Instability Phenomena – Modelling and Experimental Investigation

By Davide Papini, Antonio Cammi, Marco Colombo and Marco E. Ricotti

2371

Open access peer-reviewed

13. Spray Cooling

By Zhibin Yan, Rui Zhao, Fei Duan, Teck Neng Wong, Kok Chuan Toh, Kok Fah Choo, Poh Keong Chan and Yong Sheng Chua

5639

Open access peer-reviewed

14. Wettability Effects on Heat Transfer

By Chiwoong Choi and Moohwan Kim

4784

Open access peer-reviewed

15. Liquid Film Thickness in Micro-Scale Two-Phase Flow

By Naoki Shikazono and Youngbae Han

2860

Open access peer-reviewed

16. New Variants to Theoretical Investigations of Thermosyphon Loop

By Henryk Bieliński

1499

Open access peer-reviewed

17. Nanofluids for Heat Transfer

By Rodolphe Heyd

2289

Open access peer-reviewed

18. Forced Convective Heat Transfer of Nanofluids in Minichannels

By S. M. Sohel Murshed and C. A. Nieto de Castro

4312

Open access peer-reviewed

19. Nanofluids for Heat Transfer – Potential and Engineering Strategies

By Elena V. Timofeeva

5821

Open access peer-reviewed

20. Heat Transfer in Nanostructures Using the Fractal Approximation of Motion

By Maricel Agop, Irinel Casian Botez, Luciu Razvan Silviu and Manuela Girtu

1687

Open access peer-reviewed

21. Heat Transfer in Micro Direct Methanol Fuel Cell

By Ghayour Reza

1423

Open access peer-reviewed

22. Heat Transfer in Complex Fluids

By Mehrdad Massoudi

1641

Open access peer-reviewed

23. A Numerical Study on Time-Dependent Melting and Deformation Processes of Phase Change Material (PCM) Induced by Localized Thermal Input

By Yangkyun Kim, Akter Hossain, Sungcho Kim and Yuji Nakamura

3084

Open access peer-reviewed

24. Thermal Energy Storage Tanks Using Phase Change Material (PCM) in HVAC Systems

By Motoi Yamaha and Nobuo Nakahara

8182

Open access peer-reviewed

25. Heat Transfer and Phase Change in Deep CO2 Injector for CO2 Geological Storage

By Kyuro Sasaki and Yuichi Sugai

1925

Edited volume and chapters are indexed in

  • Worldcat
  • OpenAIRE
  • Google Scholar
  • AZ ebsco
  • Base
  • CNKI
  • IET Inspec

Order a hardcopy of the Edited volume

Free shipping with DHL Express

Hardcover (ex. VAT)£205

Order now

Residents of European Union countries need to add a Book Value-Added Tax of 5%. Institutions and companies, registered as VAT taxable entities in their own EU member state, will not pay VAT by providing IntechOpen with their VAT registration number. This is made possible by the EU reverse charge method.

Special discount for IntechOpen contributors

All IntechOpen contributors are offered special discounts starting at 40% OFF available through your personal dashboard

Login and purchase