Abstract
Electroencephalography (EEG) has evolved over the years to be one of the primary diagnostic technologies providing information concerning the dynamics of spontaneous and stimulated electrical brain activity. The core question of EEG is to acquire the precise location and strength of the sources inside the human brain by knowledge of an electrical potential measured on the scalp. But in what way is the source recovered? Leaving aside the biological mechanisms on the cellular level responsible for the recorded EEG signals, we pay attention to the mathematical aspects of the narrative. Our goal is to provide a brief and concise introduction of the mathematical terminology associated with the modality of EEG. We start from the very beginning, presenting step by step the mathematical formulation behind EEG in a simple and clear manner, keeping the mathematical notation to a minimum. Whilst we serve only the key relations for the described problems, we focus specifically on the limitations of each modelling approach. In this fashion, the reader can appreciate the beauty of the formulas presented and discover every single piece of information encoded within these formulas.
Keywords
- EEG
- mathematical analysis
- forward problem
- inverse problem
- spherical conductor
- ellipsoidal conductor
1. Introduction
The human brain is a remarkable and fascinating organ exhibiting a tremendous complexity. It makes us unique and defines who we are. In spite of our scientific and technological progression, we do not know the particulars of its operating, and as we delve into its secrets, various surprises emerge, for example, nearly 100 previously unidentified brain areas have been recently discovered [1]. Consisting of an inconceivable network of interconnected nerve cells and fibres, continuously transporting and processing information, the brain is extremely vulnerable and requires paramount protection. Several layers of safety are incorporated starting with three connective sheets of tissue, called the meninges containing the cerebrospinal fluid, followed by plates of bones, the skull. Above machinery safeguards the brain from mechanical damage. On the other hand, a sophisticated barrier within the brain provides a natural defence against toxic or infective agents.
Examining the anatomy of the brain, we recognize three distinct regions. The largest part of the brain is the cerebrum, divided into two hemispheres. The outermost layer of the cerebrum is the cerebral cortex, consisting of four lobes. Cognitive awareness has its origins here. The second largest part of the brain is the cerebellum, located underneath the cerebrum and responsible for motor control and learning. Last, but not least, an integral part of the brain connecting the cerebrum with the spinal cord is the brainstem, regulating reflexes and crucial, basic life functions. Detailed information can be found in [2].
The operational status of the brain is based on an alternating chain of electrical and chemical events. On the microscopic level, encoding and transmitting of information via electrochemical signals is achieved by the active participation of neuronal and non‐neuronal constituents. Brain cells communicate through synaptic transmissions by controlling chemical transmitters or ionic currents which flow across their membranes. As a consequence, an electromagnetic field is generated. For a far‐reaching introduction on the subject, see [3]. The question at hand now lies in the possibility exploiting these provoked fields. It seems only reasonable that if a substantial number of cells form a critical mass, which activates synchronously, the emerging electric and magnetic field should be detectable. This is indeed the case and a deeply rooted concept in electrophysiology [4, 5]. From an electrofunctional point of view, the ionic micro‐flow within a single brain cell creates an opposite polarity between two point electrical charges very close together, leading to the notion of a dipole, a physical quantity one could say consists of the ‘fundamental unit’, which produces the observed fields. Dipoles are characterized by a vector called moment, the product of the charge and distance, visualized as an arrow pointing from a minimum (negative charge) to a maximum (positive charge), ergo featuring direction and magnitude. For that reason, it may be argued that the macroscopic description of the brain's activity is best achieved when simulated as an array of dipoles, that is, a non‐uniform distribution of positive and negative charges. According to the latter, if a small neighbourhood is stimulated, an excessive number of dipoles concur and their electric fields would add or cancel one another depending on the direction. This complicated and difficult situation can be avoided by introducing the concept of the equivalent current dipole (ECD), namely a single dipole which generates the identical electric field as all of the individual dipoles together, hence summarizing the net effect of all microscopic currents located in the distinct region of the brain under consideration. This is a widely used approximation concept in the framework of neuroelectromagnetism [6, 7]. On the other hand, when the exertion is no longer confined to a focal region of the brain, then every one of these regions is simulated by an equivalent current dipole, leading to a distribution of sources.
The main task and problem is to correlate active regions with associated generated electric fields. This essential step is closely connected with the installation of physical structures, namely a boundary or number of boundaries enclosing distinct regions with specific physical characteristics, such as conductivity. The head model obtained is termed the volume conductor model. Clearly, the level of details incorporated into the head model provides an analogous degree of operational freedom when it comes to investigate how the fields generated by brain cells are transmitted through various biological tissues towards measurement apparatus. As a result, the volume conductor model consists of the physical foundation for source analysis, which is categorized into two major problems. The first one is associated with the calculation of the electric potential, generated by known electrochemical sources within the brain, at precise points at the surface of the scalp. This is the forward electroencephalographic (EEG) problem [8–11]. The forward EEG problem has been extensively scrutinized for over 60 years since Wilson and Bayley [12] attempted to quantify the interplay between neuronal activity and the potentials they generate at the scalp. The reconstruction of the sources responsible for the recorded values is called the corresponding inverse EEG problem [13].
As of today, a high level of details can only be achieved with the aid of numerical models, which are generally categorized into boundary element models (BEMs) and finite element models (FEMs). Whereas boundary element models are adequate to portray major tissue compartments, such as the cerebrum and skull, they fail to represent detailed anatomical information within the compartments, such as the cerebral folding [14, 15]. Finite element models, on the other hand, are efficient in capturing these details, but are labour intensive and computationally demanding [16, 17].
Nonetheless, in order to gain a deeper comprehension of the problem a rigorous mathematical analysis is essential in providing a vital step towards the recognition of the underlying phenomena as well as identifying the limitations of the developed algorithms. The importance of mathematical analysis cannot be emphasized enough, since (i) it allows testing the impact of modifications regarding various variables upon the output of the system and provides further insight into underlying physical behaviour. (ii) It serves as validation tools for the numerical models.
2. The mathematical formulation of the EEG problem
Think of the following scenario. You are conducting a series of experimental or clinical studies, but out of curiosity and foremost for a better understanding of the way the system under consideration behaves, you desire to build a mathematical model interpreting as best as possible your measurements. But, where to begin? First of all, we will need a framework which is capable of, at least to a degree, explaining what happens and why. If such a framework does not exist, we have to formulate one. As mentioned in Section 1, the electrochemical activity of brain cells results in bioelectric sources which generate an electric field in the neighbourhood of the cells. This field varies generally in time. Consequently, electromagnetic phenomena materialize. Luckily for us, the framework interpreting this kind of phenomena and the starting point of our endeavour are Maxwell's equations, a set of four equations, namely
The inverted delta present in Eq. (1) is called del, or nabla, and consist of a mathematical device named operator, a symbol indicating that an action must be performed on what follows. The algebraic operations of the dot (
Maxwell equations connect the electric fields
where
In what follows, we shall consider the following instance. For a finite medium, we introduce the characteristic dimension
It can be shown [19] that for a medium the size of the brain,
Let us focus on the first of Eq. (4). The curl of a vector, that is, the operator
An inherit characteristic of linear systems is the principle of superposition. Here, the electric fields are superposable, meaning that the electric field generated by a number of charges can be expressed as the vector sum of the electric fields generated by each charge separately; it follows from Eq. (5) that the electric potentials are superposable as well. As a result, it is much easier to compute the provoked potential than the corresponding electric field.
At this point, the benefit of Eq. (5) is not clear yet. To show the usefulness of Eq. (5), we utilize a theorem of vector calculus stating that the divergence of the curl of a vector always vanishes. Applying the latter on the second of Eq. (3), we are left with
and the current density of
where the proportionality constant
Combining Eqs. (5), (6) and (8), we arrive at the following differential equation:
which must be satisfied by the electric potential
where the symbol
When the conductivity varies in space, that is, the medium under consideration is inhomogeneous, consisting of compartments which are not of the same material, the quantity
Note that the ‘source term’, namely the right‐hand side of Eq. (11), is not the primary current per se, but the divergence of
So far, we managed to derive at an equation which allows the computation of the electric potential, but our framework is still incomplete. Because the medium under consideration is finite, that is, confined in space by a closed surface‐boundary, we need a set of additional constrains, the so‐called boundary conditions, which
where
Further note that, by virtue of
3. The brain modelled as a volume conductor
The next step in our journey is to introduce a geometry simple enough in order to carry out the mathematics associated, still adequate realistic in order to illustrate what happens. In practice, above specifications are never met. On the grounds that our interest is focused on the derivation of analytic formulas which will allow us to identify and recognize underlying phenomena, we restrain ourselves to the study of two particular geometries: (i) the spherical and (ii) the ellipsoidal. The distinctness of these two geometries lies in a different representation of the same point in space.
Before we continue, we have to incorporate our assumption regarding the nature of the primary current. For a single, localized dipole at point
where the functional
3.1. The homogeneous spherical brain
The simplest possible geometry in order to represent the brain consists of a spherical homogeneous conductor with radius
The obvious question at hand is what part of the brain do we model? Clearly, since our initial model is based on homogeneity, it cannot represent the brain en masse, as mentioned in Section 1. So we start with the uppermost region of the human central nervous system, the cerebrum. It is therefore of uttermost importance to be aware of the strengths and weaknesses of the proposed model(s). Without any doubt, the homogeneous spherical model presents an unrealistic assumption of the brain‐head system. So why should we bother with theoretical models? The answer is relatively simple. We need them in order to be able to draw conclusions when we move to build models of higher complexity. They serve the important task revealing gaps between forthcoming models, but more substantially they allow us to test the reliability of the introduced algorithms in a straightforward and timely matter. On the other hand, with the homogeneous model, activity in subcortical structures is impossible to detect. Moreover, the influence of the bone architecture enclosing the brain cannot be assessed as well. The latter implies that we actually do not record EEG data at all, but rather monitor the electrophysiology of the (exposed) cerebrum by electrocorticography (ECoG), or intracranial electroencephalography (iEEG).
3.1.1. Forward and inverse problem for a single dipole and multiple dipoles
Having aforementioned remarks in mind, let's begin finding a relation which connects the electric potential on the surface of our conductor model with the electric activity of cells inside. Our goal is achieved solving Eq. (11) combined with expression (14), namely
supplemented by the condition
which follows at once from the second condition (12) expressing the circumstance that the conductivity outside the brain vanishes, and expresses the ‘reality’ that no current exists outside the brain.1 Note that the compatibility condition (13) is automatically satisfied by Eq. (16).
Employing analytic techniques, the interested reader can find all details in Ref. [22]; it is not hard to show that the solution regarding Eqs. (15) and (16) evaluated at the surface is given as
where a hat ‘^’ denotes the unit vector,
Expression (17) can be simplified using a summation formula [22, 24] yielding the following closed form:
where an italics‐type capital letter denotes the magnitude of the corresponding vector. Eq. (18) consists of the simplest, straightforward expression regarding EEG data.
Let us now concentrate on the most important aspect when it comes to imaging modalities, such as EEG, namely the problem of identifying the primary source by means of a generated electromagnetic field. We recall that the notion of an equivalent dipole source has been adopted in order to summarize the entire microscopic currents located in the vicinity of a specific area in the brain. Notwithstanding, there does not exist an exclusive source configuration for each set of electroencephalographic measurements, constituting the corresponding inverse problem non‐unique. The only way to eliminate non‐uniqueness is to provide supplementary information's, that is, imposing additional assumptions. By introducing the assumption of an equivalent dipole source, the inverse problem can be solved exactly as we will show in the sequel.
The inverse problem for the homogeneous spherical conductor is formulated as follows. From surface measurements, we identify the potential
A word of caution with respect to Eq. (19). In order to employ the latter, we must know the surface potential on every single point via Eq. (17). In practice, the function
where
There is another way to recover the solution to the inverse problem for a single dipole. The approach illustrated provides a glimpse into the beauty of mathematical analysis. We will show that the uniqueness of the inverse problem, for a single dipole, is closely connected with the condition of attaining certain relations connecting the measured data. Considering that we need six equations to identify the source, we expand Eq. (17) for
where again the first three coefficients
Adopting Gauss elimination, we find that the position of the dipole is given as
where
A very important aspect, revealed by the above analysis, is evidence that the dipoles position specified by relations (24) is unique, only if the recorded values for the coefficients present in Eq. (22) satisfy the following relations:
Indeed, replacing the analytic expressions for the coefficients of Eq. (22) into Eq. (25), these are trivially satisfied. Complementary, we briefly state that the least‐square solution to Eq. (23) is
However, in ‘reality’ EEG recordings provide values for the coefficients
Until now, we attended the situation where brain activity is simulated by a single dipole. What happens if a larger area or multiple areas are stimulated? Is a single dipole adequate to describe the event? Multiple areas of the cortex are often expected to be active at the same time, so the answer must be no. In Section 2, we mentioned that the electric fields are superposable. As a consequence, the surface potential due to
employing the addition theorem for Legendre functions
Since we consider the surface potentials to be identical, irrespective of the number of dipoles, the coefficients of Eqs. (26) and (27) must be equal, namely
If Eq. (28) is satisfied, a distinguishing between dipoles is not possible. A thorough investigation of the latter shows that if the dipoles are parallel to each other, the uniqueness conditions (25) are fulfilled and it is impossible to decide if the measurements are induced by a single or finite number of dipoles [25].
3.1.2. Forward and inverse problem for distributed activity
If we abandon the assumption that the primary current
Albanese and Monk [28] illustrated that it is not possible to recreate a three‐dimensional current based on EEG measurements. This result has been practically demonstrated in Ref. [27], where the authors show that the radius of a small spherical current cannot be recovered. For currents having dimensions less than three, the inverse EEG problem admits a unique solution. In previous sections, we swiftly examined currents of zero dimensionality, namely dipoles. In what follows, we will explore the forward and inverse EEG problems for one‐ and two‐dimensional continuously distributed currents [29, 30].
We begin by assuming that the current is a small line segment of length 2
When investigating the two‐dimensional case, the mathematical complexity takes it up a notch. Assuming that the current is a small disk of radius ε, centred at
An independent view to the particular problem has been provided by Fokas [31]. After formulating the surface potential with explicit
Note that the electric potential depends only on
furnishing
It is remarkable that the above coefficients can be determined only under the assumption that
3.2. The homogeneous ellipsoidal brain
From the point of view of mathematical analysis, any three‐dimensional object, such as the brain, would be best approximated with the aid of a coordinate system with three degrees of freedom, one in each direction. Fortunately, aforesaid system exists and is called the ellipsoidal coordinate system. Whereas the spherical coordinate system consists of concentric spheres centred at the origin, in the ellipsoidal coordinate system, each point is specified by the intersection of three non‐degenerate second‐degree surfaces, corresponding to an ellipsoid, a hyperboloid of one sheet as well as a hyperboloid of two sheets. This constitutes the ellipsoidal system significantly more complex and demanding than the spherical one (see [32] for an analytic account). For example, whereas knowledge of the brain's volume can be directly translated into the radius of the corresponding sphere, the volume of an ellipsoid is proportional to the product of three parameters
3.2.1. Forward and inverse problem for a single dipole and distributed activity
In order to acquire the surface potential for an active dipole within an ellipsoidal brain, the same machinery as for the sphere is utilized. There are, however, some differences. The spherical coordinates are easily established by fixing the centre of the system and moving a distance
Consider in what follows a homogeneous ellipsoidal conductor with semi‐axes
Employing analytic techniques, the interested reader can find all details in Ref. [33], the solution regarding Eqs. (29) and (30) evaluated at the surface is
where
Before proceeding, we mention that an elegant and straightforward expression connecting the surface potential with the moment
We turn now to the inverse problem. In principle, the procedure described for the sphere is generally applicable since it is geometry independent. Note again that every detail regarding the moment
which incorporates characteristics, such as the geometrical and physical properties of the conductor, as well as the EEG measurements, the algebraic manipulations leading to the solution are somewhat a little more painless. Solving a linear system of six equations with six unknowns, it can be shown [34] that the dipoles position
and
for every
and
where
In the case of a continuously distributed current, we follow the example laid out for the sphere. Replacing
where Helmholtz's decomposition has been used. We compute the above integral analytically by expanding
After a series of cumbersome algebra, it can be shown that [31]
where
As for the spherical conductor, additional information is required in order to evaluate the coefficients
4. Discussion
We presented a brief but concise introduction of the mathematical terminology associated with the modality of EEG. Having in mind medical and health professionals, we start from the very beginning, presenting step by step the physics and mathematical formulation behind EEG in a simple manner, keeping the mathematical notation to a minimum. The tools and techniques needed in order to derive at the presented results are intentionally not incorporated for two reasons. First of all, the procedure deriving at these formulas is not an easy task in general. Secondly, the main focus of this work is to display the beauty of the final expressions for every problem, showing how every single piece of information is encoded within these formulas and by what means the extraction of conclusions is accomplished.
Our introduction starts with the most elementary model possible, which, at the same time, is also the most straightforward and understandable of models. Representing the brain as a homogeneous sphere is an unrealistic assumption but serves an important task. At present, it is the only geometry for which the electromagnetic fields generated by a dipole source are exactly known in closed form. Further, it is needed in order to be able to draw conclusions when we move to build models of higher complexity. It therefore reveals disparities between forthcoming models, but more substantially, it allows us to test the reliability of the introduced algorithms in a straightforward and timely matter. Moreover, an analytic benchmark problem is provided, which can be used to test existing and new formulations.
For example, based on the homogeneous spherical model it is shown in Ref. [35] to what degree deformations present at the conductor's surface affect EEG measurements. Although the EEG data are evaluated in a view to a deformed conductor, the calculations are accomplished based on the spherical geometry, furnishing a fast analytic algorithm prone to almost minimum error. Another characteristic example of rigorous mathematical analysis is the quantitative description of the non‐uniqueness for the EEG inverse problem, presented in Ref. [36]. Therein, splitting the current into components, the authors prove that none of those components contributes to both the electric and scalar magnetic potential; in other words, recordings of EEG and MEG do not contain overlapping information about the current. However, aforementioned property holds no longer true if the spherical conductor is disregarded.
Analogous conclusions are valid for the ellipsoidal geometry as well. For example, the authors consider in Ref. [37] the frequent case when clinical data of unknown origin are implemented in computational simulations. We mentioned earlier that there exist a plethora of combinations of the product
The error analysis presented in Ref. [37] can be considered as rather straightforward, since both ellipsoids under consideration were confocal, that is, members of the same ellipsoidal system enjoying the same foci. In plain words, no member of a confocal family touches another. Consequently, there exists a single curve, which cuts both ellipsoids normally, and the corresponding intersecting points consist of the most proximate pair between the two ellipsoids in each direction. These two points are employed in the analysis calculating the aforementioned error. But what would happen if the two ellipsoids would not be considered to be confocal? This interesting case is also more realistic.
In order to provide an answer to the latter, a sophisticated correspondence is needed connecting two points on the surface of two ellipsoids which are now non‐confocal. This means that there probably exists a point shared by both ellipsoids. In Ref. [38], the authors investigated the effect implied by a deviation of the eccentricities of the ellipsoidal model on the electric potentials registered as the EEG data. In this case, the error reaches high values up to almost 100%.
Turning our attention from the geometrical deformation of the conductor model, to the physical assumption of homogeneity, we acknowledge the significance of the non‐homogeneity imposed by the layers of different conductivity that cover the host tissue of the EEG source. The conductive elements that constitute the scalp, the scull and the meninges, which interfere between the EEG measurements and the cerebrum, are affected by the electromagnetic field produced by activation of the source. Hence, they induce a volume current that perturbs the total electric potential registered on the EEG receptors on the scalp. The effect of this physical perturbation of the potential has been studied by incorporating a layered conductivity profile in all the models discussed in the present review, by characterizing each layer by a distinct but constant conductivity value.
Indicatively, we infer that switching to a layered ellipsoidal model of the head‐brain system, the functional form of the electric potential, is basically unaltered. One of the authors has showed [39] that the conductivity profile of the layered structure enters the potential formula by normalizing each term by a constant which incorporates the conductivity jumps across the interfaces and the geometrical characteristics of the layers. Analogous results show a similar effect on the inhomogeneous conductor [31]. Hence, the formula of the electric potential that will serve as the stepping stone for the inverse calculations is the one that corresponds to the most realistic inhomogeneous models that acknowledge the layered conductivity profile of the head‐brain system. A promising challenge for future investigations refers to incorporating the anisotropic conductivity profile, where the conductivity varies with the direction into each separate compartment, modelling, for example, the different conductivity of the white matter of the brain than that of grey matter.
Using tensor conductivity for modelling the brain anisotropy is one of the many analytical mathematical challenges of this fascinating area of functional brain imaging while creative mathematical modelling has a lot to contribute in the close examination of EEG theory and applications.
References
- 1.
M.F. Glasser, T.S. Coalson, E.C. Robinson, C.D. Hacker, J. Harwell, E. Yacoub, K. Ugurbil, J. Andersson, C.F. Beckmann, M. Jenkinson, S.M. Smith and D.C. Van Essen. A multi‐modal parcellation of human cerebral cortex. Nature. 2016; 536 :171–178. DOI: 10.1038/nature18933 - 2.
T. Vanderah and D. Gould. Nolte’s The Human Brain: An Introduction to its Functional Anatomy. 7th ed. Elsevier; 2015. 720 p. ISBN‐13: 978‐1455728596 - 3.
E.R. Kandel, J.H. Schwartz, T.M. Jessell. Principles of Neural Science. 4th ed. McGraw‐Hill; 2000. 1414 p. ISBN‐13: 978‐0838577011 - 4.
B.J. Larson. A review of the history of electrophysiology and electroencephalography: Part I. American Journal of EEG Technology. 1963; 3 (1):13–16. DOI: 10.1080/00029238.1963.11080601 - 5.
B.J. Larson. A review of the history of electrophysiology and electroencephalography: Part II. American Journal of EEG Technology. 1963; 3 (3):61–64. DOI: 10.1080/00029238.1963.11080609 - 6.
M. Scherg. Fundamentals of dipole source potentials. In: F. Grandori, M. Hoke, and G.I. Romani, editors. Auditory Evoked Magnetic Fields and Electric Potentials. Karger; 1990. p. 40–69. ISBN‐13: 978‐3805550017 - 7.
P.L. Nunez and R. Srinivasan. Electric Fields of the Brain: The Neurophysics of EEG. 2nd ed. Oxford University Press; 2006. 640 p. ISBN‐13: 978‐0195050387 - 8.
H. Hallez, B. Vanrumste, R. Grech, J. Muscat, W. De Clercq, A. Vergult, Y. D’Asseler, K.P. Camilleri, S.G. Fabri, S. Van Huffel, and I. Lemahieu. Review on solving the forward problem in EEG source analysis. Journal of NeuroEngineering and Rehabilitation. 2007; 4 (1):46. DOI: 10.1186/1743‐0003‐4‐46 - 9.
R. Grech, T. Cassar, J. Muscat, K.P. Camilleri, S.G. Fabri, M. Zervakis, P. Xanthopoulos, V. Sakkalis, and B. Vanrumste. Review on solving the inverse problem in EEG source analysis. Journal of NeuroEngineering and Rehabilitation. 2008; 5 (1):25. DOI: 10.1186/1743‐0003‐5‐25 - 10.
S. Baillet, J. Mosher, and R. Leahy. Electromagnetic brain mapping. IEEE Signal Processing Magazine. 2001; 18 (6):14–30. DOI: 10.1109/79.962275 - 11.
F. Vatta, F. Meneghini, F. Esposito, S. Mininel, and F. Di Salle. Realistic and spherical head modeling for EEG forward problem solution: a comparative cortex‐based analysis. Computational Intelligence and Neuroscience. 2010; 2010 :972060, 11 pages. DOI: 10.1155/2010/972060 - 12.
F.N. Wilson and R.H. Bayley. The electric field of an eccentric dipole in a homogeneous spherical conducting medium. Circulation. 1950; 1 (1):84–92. - 13.
B. Vanrumste, G. Van Hoey, R. Van de Walle, M.R.P. D’Havé, I.A. Lemahieu, and P.A.J.M. Boon. Comparison of performance of spherical and realistic head models in dipole localization from noisy EEG. Medical Engineering & Physics. 2002; 24 (6):403–418. DOI: 10.1016/S1350‐4533(02)00036‐X - 14.
Mosher, R. Leahy, P. Lewis. EEG and MEG: forward solutions for inverse methods. IEEE Transactions on Biomedical Engineering. 1999; 46 (3):245–259. - 15.
Z. Akalin Acar, S. Makeig. Effects of forward model errors on EEG source localization. Brain Topography. 2013; 26 (3):378–396. DOI: 10.1007/s10548‐012‐0274‐6. - 16.
J. Vorwerk, J.H. Cho, S. Rampp, H. Hamer, T.R. Knösche, C.H. Wolters. A guideline for head volume conductor modeling in EEG and MEG. NeuroImage. 2014; 100 :590–607. DOI: 10.1016/j.neuroimage.2014.06.040 - 17.
Y. Huang, L.C. Parra and S. Haufe. The New York Head—A precise standardized volume conductor model for EEG source localization and tES targeting. NeuroImage. 2016; 140 :150–162. DOI: 10.1016/j.neuroimage.2015.12.019 - 18.
L.D. Landau, L.P. Pitaevskii and E.M. Lifshitz. Electrodynamics of Continuous Media. 2nd ed. Butterworth‐Heinemann; 1984. 460 p. ISBN‐13: 978‐0750626347 - 19.
P. Plonsey and D.B. Heppner. Considerations of quasi‐stationarity in electrophysiological systems. Bulletin of Mathematical Biophysics. 1967; 29 (4):657–664. DOI: 10.1007/BF02476917 - 20.
O. Darrigol. Electrodynamics from Ampère to Einstein. Oxford University Press; 2003. 552 p. ISBN‐13: 978‐0198505938 - 21.
J.I. Richards and H.K. Youn. The Theory of Distributions: A Nontechnical Introduction. Cambridge University Press; 1995. 157 p. ISBN‐13: 9780521371490 - 22.
G. Dassios. Electric and magnetic activity of the brain in spherical and ellipsoidal geometry. In: H. Ammari, editor. Mathematical Modeling in Biomedical Imaging I. Electrical and Ultrasound Tomographies, Anomaly Detection, and Brain Imaging. Springer; 2009. p. 133–202. DOI: 10.1007/978‐3‐642‐03444‐2_4 - 23.
F.W.J. Olver, D.W. Lozier, R.F. Boisvert, C.W. Clark, editors. NIST Handbook of Mathematical Functions. Cambridge University Press; 2010. 968 p. ISBN‐13: 978‐0521140638 - 24.
D. Yao. Electric potential produced by a dipole in a homogeneous conducting sphere. IEEE Transactions on Biomedical Engineering. 2000; 47 (7):964–966. DOI: 10.1109/10.846691 - 25.
G. Dassios, M. Doschoris and K. Satrazemi. Localizing brain activity from multiple distinct sources via EEG. Journal of Applied Mathematics. 2014; 2014 :232747. DOI: 10.1155/2014/232747 - 26.
A. Ben‐Israel, T.N.E. Greville. Generalized Inverses: Theory and Applications. 2nd ed. Springer; 2003. 420 p. ISBN‐13: 978‐0387002934 - 27.
G. Dassios and A.S. Fokas. Electro‐magneto‐encephalography for a three‐shell model: dipoles and beyond for the spherical geometry. Inverse Problems. 2009; 25 (3):035001. DOI: 10.1088/0266‐5611/25/3/035001 - 28.
R. Albanese and P.B. Monk. The inverse source problem for Maxwell’s equations. Inverse Problems. 2006; 22 (3):1023–1035. DOI: 10.1088/0266‐5611/22/3/018 - 29.
G. Dassios, G. Fragoyiannis, and K. Satrazemi. On the inverse EEG problem for a 1D current distribution. Journal of Applied Mathematics. 2014; 2014 : ID 715785, 11 pages. DOI: 10.1155/2014/715785 - 30.
G. Dassios and K. Satrazemi. Inversion of electroencephalography data for a 2‐D current distribution. Mathematical Methods in the Applied Sciences. 2014; 38 (6):1098–1105. DOI: 10.1002/mma.3132 - 31.
A.S. Fokas. Electro‐magneto‐encephalography for a three‐shell model: distributed current in arbitrary, spherical and ellipsoidal geometries. Journal of The Royal Society Interface. 2009; 6 (34):479–488. DOI: 10.1098/rsif.2008.0309 - 32.
G. Dassios. Ellipsoidal Harmonics. Theory and Applications. 1st ed. Cambridge University Press; 2012. 474 p. ISBN‐13: 9780521113090 - 33.
F. Kariotou. Electroencephalography in ellipsoidal geometry. Journal of Mathematical Analysis and Applications. 2004; 290 (1):324–342. DOI: 10.1016/j.jmaa.2003.09.066 - 34.
G. Dassios and A.S. Fokas. Electro‐magneto‐encephalography for the three‐shell model: a single dipole in ellipsoidal geometry. Mathematical Methods in the Applied Sciences. 2012; 35 (12):1415–1422. DOI: 10.1002/mma.2508 - 35.
M. Doschoris, G. Dassios, and G. Fragoyiannis. Sensitivity analysis of the forward electroencephalographic problem depending on head shape variations. Mathematical Problems in Engineering. 2015; 2015 :612528, 14 pages. DOI: 10.1155/2015/612528 - 36.
G. Dassios and D. Hadjiloizi. On the non‐uniqueness of the inverse problem associated with electroencephalography. Inverse Problems. 2009; 25 (11):115012, 18 pp. DOI: 10.1088/0266‐5611/25/11/115012 - 37.
M. Doschoris and F. Kariotou. Quantifying errors during the source localization process in Electroencephalography. Part 1: Confocal systems. IMA Journal of Applied Mathematics. In revision. - 38.
M. Doschoris and F. Kariotou. Quantifying errors during the source localization process in Electroencephalography. Part 2: Non‐confocal systems. Under review. - 39.
S.N. Giapalaki and F. Kariotou. The complete ellipsoidal shell model in EEG imaging. Abstract and Applied Analysis. 2006; 2006 :57429, 18 pages. DOI: 10.1155/AAA/2006/57429
Notes
- This statement is true only for a homogeneous conductor as described in Section 3.