Open access

Selection of Additive Manufacturing Technologies Using Decision Methods

Written By

Anderson Vicente Borille and Jefferson de Oliveira Gomes

Submitted: 01 December 2010 Published: 26 September 2011

DOI: 10.5772/24045

From the Edited Volume

Rapid Prototyping Technology - Principles and Functional Requirements

Edited by Muhammad Enamul Hoque

Chapter metrics overview

4,593 Chapter Downloads

View Full Metrics

Written By

Anderson Vicente Borille and Jefferson de Oliveira Gomes

Submitted: 01 December 2010 Published: 26 September 2011