Open access peer-reviewed chapter

# Mathematical Modeling and Well-Posedness of Three-Dimensional Shell in Disorders of Human Vascular System

By Vishakha Jadaun and Nitin Raja Singh

Submitted: March 15th 2019Reviewed: September 23rd 2019Published: January 3rd 2020

DOI: 10.5772/intechopen.89866

Downloaded: 243

## Abstract

Aortic dissection is the most common aortic emergency requiring surgical intervention. Whether the elective endovascular repair of abdominal aortic aneurysm reduces long-term morbidity and mortality, as compared with traditional open repair, remains uncertain. The foundation of shell element based on the Reissner-Mindlin kinematics assumption is widely applicable, but this cannot model applications of shell surface stresses as needed in analysis of shell in human vascular system. The analysis is designed to assess progression of initial lesion in aortic dissection. Using general shell element analysis and tensor calculus, a higher order differential geometry-based model is proposed. Since the shell is thin, a variational formulation for initial lesion is proposed. The variational formulation for initial lesion is well posed. The weak convergence of the solution to initial lesion model is mathematically substantiated. Asymptotic analysis shows that initial lesion is membrane-dominated and bending-dominated when pure bending is inhibited and noninhibited, respectively. At least two observations are to be noted. First, the mathematical analysis of the initial lesion model is distinct from classical shell models. Second, the asymptotic analysis of the initial lesion model is based on degenerating three-dimensional continuum to bending strains in order to assess initial lesion behavior.

### Keywords

• aortic dissection
• higher order kinematical assumptions
• initial lesion model
• variational formulation
• asymptotic analysis

## 1. Introduction

The shell structure is generally a three-dimensional structure that is elongated in two directions and thinned out in other direction. The shell structures in nature are profusely impressive such as seashells and eggshells. In various industries including aeronautics, naval architecture, and automotive engineering milieu, many engineering designs are analyzed to design shells as thin as possible and optimize the amount of material . Human anatomy develops cyst-related diseases with progressive severity. These disease states involve single to multiple cyst formations in distinct organ systems including the lung, liver, kidney, brain, bone etc. Pathophysiologically, these cysts emanate from either the underlying genetic anomaly or infections such as helminths and mycobacterial, among others. Interestingly, these cysts can be modeled as shells, albeit in higher dimensions.

Different approaches have been formulated for shell elements discretization. One of the approaches  evaluated the shell behavior as the superimposition of membrane bending action as well as plate bending action. The discrete construction of shell elements requires a combination of plane stress matrices as well as plate bending stiffness matrices. However, the resultant shell elements are less accurate since curvature effects are not duly incorporated and the membrane behavior and plate bending behavior are coupled at nodal points only. Another approach  is based on variational formulation and perusing relevant shell theory wherein a specific shell theory is constituted of higher-order derivatives and required concomitant nodal point variables beyond the conventional nodal point rotations and displacements. Such an approach is applicable and relevant to certain shell geometries and associated pertinent analysis conditions. Thus, it is difficult to model more complex shell structures. Yet another approach  is aimed for very general formulation related to three-dimensional continuum degeneration. In this approach, the mid-surface of the shell element that belongs to the three-dimensional continuum is clearly defined and identified. The first assumption is that the fibers are straight and normal to mid-surface prior to the deformation which continues to remain straight during the course of deformation. The second assumption is that the stress normal to the shell mid-surface is zero throughout the shell motion [5, 6]. The shell models based on the aforementioned kinematical assumptions can be interpreted as a truncation of the expansion of displacements in different directions across the thickness of the shell structure. It is to be noted that such truncated expansion contains terms up to degree one and degree zero for the tangential displacements and transverse displacements, respectively. The physiological and pathological states in the human body undergo dynamic transformations. In cardiovascular dynamics, the interaction of blood to the internal vessel lining is associated with large through-the-thickness displacement of local vessel wall surface owing to distension by propulsion of blood and elastic recoil thereafter. Thus, the aforementioned assumptions might not be applicable to shells in human anatomy. In order to make better estimate, higher-order kinematical assumptions are effective. Yet the detailed analysis of biological shell structures frequently presents challenging problems. One of the difficulties is that the shell structure resists applied loads largely along its curvature such that, in case, curvature is changed and the load bearing capacity of shell is transformed. Therefore, analysis of boundary conditions of a shell structure plays a vital role in shell behavior and its response to stress.

The aorta is the largest diameter blood vessel, emerging from the left ventricle to supply oxygenated blood to the human body. Whenever nonlinear degeneration of the tunica media (middle layer of the vessel wall) occurs, the aorta undergoes dynamic dilatation and marginal elongation. Generally, this degeneration is caused by genetic anomaly and prolonged untreated hypertension in young and senile patients, respectively. It is termed as aortic aneurysm. Whenever there is structural discontinuity in nonconformal internal vessel wall, the blood surges through the tear causing the inner and middle layers of the aorta to separate. It is termed as aortic dissection(AD) . AD is a life-threatening condition . If the blood-filled channel ruptures through the outside aortic wall, AD is often fatal . It is the most common aortic emergency requiring surgical intervention. AD is classified according to the regional involvement of the segment of the aorta with the Stanford type A dissection and the Stanford type B dissection involving the ascending aorta and occurring distal to the left subclavian artery, respectively. According to the international guidelines on clinical therapeutics, uncomplicated type B dissection should receive optimal medical treatment (OMT). However, in spite of adequate hypertension-related treatment, patients may develop a significant aortic enlargement that necessitates operative intervention. These chronic patients will benefit in the long-term from prophylactic intervention.

Currently, there is no consensus on the management of uncomplicated type B dissection that may be liable for rapid progression. Thus, seeking multiple high-risk attributes/features responsible for rapid progression might help to decide when to treat and how to treat. There is a subgroup of patients who progress very rapidly to terminal dilatation liable for rupture and torrential bleed leading to death. Offering early transthoracic endovascular repair to this subgroup seems to be a life-saving proposition. Finding these patients is a challenge. It is not known that a patient at risk for catastrophic events is following a personal trajectory of disease progression. It is also not known that a threshold for disease progression that can predict a high risk of mortality for a specific patient. By modeling the initial lesion of AD, we can potentially avoid rupture by crossing over to transthoracic endovascular repair at a time that minimizes procedural risks. On asymptotic analysis, we evaluate the point of follow-up; we lose the ability to achieve the same desirable aortic remodeling observed with transthoracic endovascular repair in the more acute setting. Therefore, reliable predictors are needed in the early stage of disease. It aids identification of patients at risk of aortic enlargement.

In early stages of AD, subintimal intramural hemorrhage occurs due to tunica media degeneration. In certain situations, when strains are known on a plane, the low degree of expansion of the transverse displacement is to be recovered. It is to be noted that by dispensing away the assumption of plane stress, an arbitrary three-dimensional material law is applicable in three-dimensional formulation of continuum mechanics. The objective of this chapter is to identify higher-order shell model for initial-stage primary tunica intimal lesion of AD by the general shell element approach and to perform mathematical analysis.

This chapter is organized in the following manner. In Section 2, we give certain definitions, conventions, and notations relevant to the shell geometry and its corresponding deformation. Next in Section 3, we derive initial lesions of AD as the higher-order shell model perusing general shell analysis approach. Then in Section 4, we do mathematical analyses of the initial lesions described in the previous section. In Section 5, we assess asymptotic behavior of the model. Finally, in Section 6, we present our conclusions regarding mathematical modeling of shells in human vascular tissues and future scope.

Advertisement

## 2. Conventions and notations in higher-order shell geometry

We are interested in modeling early stages of AD; the initial subintimal intramural hemorrhage caused by tunica media degeneration undergoes solidification due to clot formation. Thus, this initial lesion closely follows the principles of continuum mechanics. We consider the initial lesion as a solid medium. It is geometrically defined by a mid-surface immersed in the human vascular compartment ϵ(dimensionless thickness parameter) and a parameter representing the thickness of the medium around this surface.

In order to understand the initial lesion of AD, we model the initial lesion using general shell element theory. A shell is defined as a collection of charts. Let us consider the mid-surface of a shell as a collection of two-dimensional charts. These charts are smooth ono-one maps from domains of R2into Euclidean (physical) space . We consider an initial lesion with a mid-surface Sdefined by a two-dimensional chart φ, which is a one-one map from the closure of a bounded open subset of R2, denoted by ω, into , hence S=φω. At each point of the mid-surface, the vector zαis assumed as partial derivative of φwith respect to ξαsuch that

zα=φξ1ξ2ξα.E1

These vectors are linearly independent from each other, so that they form a basis of the plane tangent to the mid-surface at this point. The unit normal vector is given by

z3=z1×z2z1×z2.

Definition 1. (Geometric definition of initial lesion). An initial lesion is a solid medium whose domainΩcan be defined by a mid-surface whose map is given by

φ:ωR2R3,s.t.φξ1ξ2=ξ1ξ2ξ3R3E2

The three-dimensional medium corresponding to the initial lesion is then defined by three-dimensional chart given by

φξ1ξ2ξ3=φξ1ξ2+ξ3z3ξ1ξ2,E3

whereξ1ξ2ξ3Ω=ξ1ξ2ξ3R3ξ1ξ2ωξ3tξ1ξ22tξ1ξ22andtξ1ξ2is the thickness of the initial lesion element atξ1ξ2.

In Eq. (1), we have defined tangent vector to a point on the mid-surface of the initial lesion (2) which lies in the region of the Euclidean space. Since we are interested in higher-order parameterization of the initial lesion of AD, the three-dimensional chart (3) of this lesion can be very helpful. Thus, transition from the Euclidean space to curvilinear coordinate system will aid to model higher-order initial lesion. It is relevant to grasp few basic notions of surface differential geometry.

### 2.1 Definitions related to surface differential geometry

Definition 2. (Covariant vector). Letrzbe a position vector; the differentiation ofrzwith respect to each of the coordinate is called covariant basis:

zi=rzziE4

If Eq. (4) defines three vectors z1, z2, and z3

z1=rz1z2z3z1,z2=rz1z2z3z2,z3=rz1z2z3z3.E5

Let Vbe a vector in R3, and then its expansion n terms of basis is

V=Vizi=V1z1+V2z2+V3z3E6

The values Viare called contravariant componentsof vector V.

Interestingly, covariant basis is useful in the modeling of higher-order initial lesions in human vascular system given by

gi=φξi=zi+ξ3z3,i=ziξ3bikzk,wherez3,i=z3ξi,gi=δikξ3bikzk,g3=φξ3=z3.E7

Definition 3. (Covariant metric tensor). The covariant metric tensor is the pairwise dot product of the covariant basis vectors:

zij=zi.zj=z1.z1z1.z2z1.z3z2.z1z2.z2z2.z3z3.z1z3.z2z3.z3,E8

where ziis in R3.

Suppose two vectors Aand Bare located at the same point and their components are Aiand Bi, then the dot product A.Bis given by

A.B=Aizi.Bjzj=zizjAiBj=zijAiBj.E9

The length of a vector Bcan be expressed in terms of covariant metric tensor as

B=zijBiBjE10

Interestingly, covariant tensors are useful in modeling of higher-order initial lesions in human vascular system given by

1. gij=gigj=zij2ξ3bij+ξ32cij

2. gi3=gig3=0

3. g33=g3g3=1

Definition 4. (Contravariant metric tensor zij). The contravariant metric tensorzijis the matrix inverse of the covariant metric tensorzij:

zijzjk=zijzkj=δki,E11

where δkiis the Kronecker symbol.

Definition 5. (Contravariant basis zi). The contravariant basisziis defined as

zi=zijzj=zjizjE12

The bases ziand ziare mutually orthonormal:

zizj=δji.E13

Definition 6. (Christoffel symbol). In affine and curvilinear coordinate systems, the covariant basisziis the same at all points and varies from one point to another, respectively. This variation can be described by the partial derivativeszi/zj. Using decomposition of partial derivativeszi/zjwith respect to the covariant basiszk, the Christoffel symbolΓijkis given by

zizj=Γijkzk.E14

Note that the Christoffel symbol is symmetric in lower indices:

Γijk=Γjik=zkzizj.E15

### 2.2 Fundamental forms

The first fundamental formof the surface is also known as the restriction of the metric tensor to the tangent plane. It is given by its components

zij=zizj.

Alternatively, its contravariant form is given by

zij=zizj.

Note that the first fundamental form can be used for the conversion of covariant components into contravariant components, such as

vi=zikvk

The Euclidean norm of the two-dimensional tensors is denoted by εand the corresponding inner product by <,>ε. Note that the first fundamental form can be used for the evaluation of such norm quantities:

<u¯,v¯>ε=uizijvj,E16
v¯ε2=vizijvj,E17
<T¯¯,U¯¯>=TijzikzjlUkl,E18
T¯¯ε2=TijzikzjlTkl.E19

The second fundamental form

bij=z3zi,j,

where

zi,j=2φξiξj=zj,i

is the fundamental form of symmetry.

The second fundamental form is yet another important second-order tensor of the surface. It is also known as the curvature tensorsince it provides information about the curvature of the surface. The values of these curvatures along the directions are called the principal curvatures. The product and the half-sum of the principal curvatures are classically known as the Gaussiancurvature and meancurvature, respectively.

The third fundamental form

cij=bikbkj

It is a derivative along a curve lying on the surface. Note that the expressions of surface Christoffel symbols and surface covariant derivative are inferred from the third fundamental form.

Remark 1. z3z3=1z3,iz3=0that isz3,iwhich lies in the tangent plane. Hence, we have

z3,i=z3,izkzk,E20

and thus

z3,i=bikzk=bikzk.E21

The initial tunica intimal lesion in AD is heterogenous in terms of various attributes such as shape, size, and conjugality among others. These notions of surface differential geometry are helpful to model these lesions as higher-order initial lesions. To illustrate, the surface of lesion modeled as initial lesion can be elliptic, parabolic, or hyperbolicaccording to whether its Gaussian curvature is positive, zero, or negative, respectively. Note that Gaussian curvature is derived from the second fundamental form. From now onwards, we simply use initial lesion model to describe initial lesion of aortic dissection.

## 3. Modeling of initial lesion

Normally, the aorta is composed of three layers, tunica adventitia, tunica media, and tunica intima (from outside to inside in cross section). Tunica adventitia is composed of linear palisades of collagen fibers as an envelope over tunica media that is a smooth muscle layer, capable of elastic recoil for propelling blood forward. Tunica intima is quite a thin innermost layer comprised of linear array of collagen fibers.

### 3.1 A simplistic view of initial lesions

To simplify, it is assumed that collagen fibers are straight and resist deformation caused by hemodynamic stresses. In addition, hemodynamic stress, normal to mid-surface of tunica media, is zero throughout the cardiac cycle. The modeling of initial lesion of AD based on the aforementioned kinematical assumptions can be interpreted as a truncation of the expansion of displacements across the thickness of the normal human aorta. The kinematical assumptions pertain to the displacements of points located on tunica intima layer of the aorta through the lesion thickness. Such points are orthogonal to mid-surface in the earlier pre-deformed configuration. Note that the kinematical assumptions connect the displacements of points located on the tunica intima layer that is orthogonal to the mid-surface of the tunica media layer in undeformed configuration. The displacement is expressed by the following equation:

Dξ1ξ2ξ3=dξ1ξ2+ξ3θkξ1ξ2zkξ1ξ2,E22

In Eq. (22), we consider the tunica intima layer in the direction of z3at the coordinate ξ1ξ2. The displacement dξ1ξ2represents a global infinitesimal displacement of the linearly arranged endothelial cells of the tunica intima on the line displacing by the similar amount. The displacement ξ3θkξ1ξ2zkξ1ξ2is due to the rotation of the line measured by θ1and θ2.

Hemodynamic flows can cause both linear and rotational strain. The linear strain is caused by laminar flow, while the rotational strain is caused by either turbulent flow and/or concomitant nonlinear geometry of the vessel. Thus, the measure of linear strain is not sufficient, rather inaccuracies emanate from the increments in rotation. We choose the principle of deformation gradient to calculate both the strains. The combined linear and nonlinear strains can be characterized by stretch tensor called Green-Lagrange strain tensor. The 3D-Lagrange-Green tensor, for which the components eαβfor general displacement Dξ1ξ2ξ3are

eαβ=12gαD,β+gβD,α,α,β=1,2,3.E23

To calculate the components of Green-Lagrange strain tensor, we need to evaluate D,α=D/ξα(displacement of endothelial cells in a line on the tunica intima in ξαdirection). For the specific displacement in (22), we compute the covariant components of the linearized strain tensor. We have

dξi=ξidkzk+d3z3E24

We peruse the fundamental forms to obtain

ξidkzk=zkdkξi+dkzkξi=zkdkξi+bikdka3.E25

Hence,

dξi=dkizk+bikdkz3+d3,iz3+d3z3,i=dkibkid3zk+d3,i+bikdkz3,E26

where dki=dk/ξi. As we have calculated the derivative for linearized strain, we calculate the derivative for rotational strain. From (21)

ξiθkzk=θkizk+bikθkz3.E27

The overall displacement in Eq. (22) is composed of linear displacement and rotational displacement. Therefore,

Dξi=dξi+ξiξ3θkzk=dkibkiz3+ξ3θkizk+d3,i+bikdk+ξ3bikθkz3.E28

Moreover,

Dξ3=θkzkE29

Substituting Eqs. (28), (29), and (7) into (23)

eij=γijd+ξ3χijdθ¯ξ32κijθ¯,i,j=1,2ei3=ζidθ¯,i=1,2e33=0,E30

where

γijd=12dij+djibijz3χijdθ¯=12θij+θjibjkdkibikdkj+cijz3κijθ¯=12bjkθki+bikθkjζidθ¯=12θi+d3,i+bikdkE31

In the framework of the kinematical assumptions, the second-order tensors, γ¯¯and χ¯¯, and the first-order tensor ζ¯are called the membrane strain, bending strain, and shear strain, respectively.

### 3.2 Higher-order model for initial lesion

In pathological conditions and even in physiological conditions strained to its limits, fluid-structure interaction in the aorta does not follow the kinematical assumptions because the arrangement of collagen fibers in the aortic wall is not straight. Tunica intima is comprised of a single layer of endothelial cells with a subendothelial layer of varying thickness. Tunica intimal surface is nonconformal depending upon the amount of subendothelial ground matrix, contrary to the conventional perspective of the conformal tunica intimal surface. The tunica media is a complex three-dimensional network of smooth muscle cells, elastin, and bundles of collagen fibrils. These well-defined concentrically oriented fibers are mutually reinforcing in radial direction. Tunica adventitia is comprised of fibroblasts, fibrocytes, collagen fibers (helically arranged), and ground matrix.

The constituents of the aortic wall including collagen fibers, elastin fibers, smooth muscle fibers, and ground matrix can stretch to deformation and recoil. Histologically and functionally, these constituents are viscoelastic; hence, aortic tissues resist deformation, albeit partially. Note that hemodynamic strain normal to mid-surface of tunica intima will not be zero.

The assumptions in the simplistic case (22) does not hold true in clinical settings. Thus, an initial lesion model is required to incorporate these attributes. An initial lesion model that is asymptotically consistent with three-dimensional solid mechanics without resorting to any independent kinematical assumptions on the strains requires correction for rotation inaccuracies, while only linearized strain tensor is perused for displacement equation (22). For initial lesion model, the displacement vector Dξ1ξ2ξ3contains at least all terms up to degree two, namely,

Dξ1ξ2ξ3=dξ1ξ2+ξ3θξ1ξ2+ξ32ϱξ1ξ2.E32

In the simplistic view, the strain normal to the tunica intima is zero since the vessel wall does not deform. In higher-order model, the vector θis arbitrary in the Euclidean space and not constrained to lie in the tangential plane. The modified expression for strain components is as follows:

eijD=γijd+ξ3χijdθ+ξ32κijθϱ+ξ33lijϱei3D=ζidθ+ξ3miθϱ+ξ32niϱe33D=ϖθ+ξ3pϱE33

where

γijd=12dij+djibijd3χijdθ=12θij+θjibjkdkibikdkjbijθ3+cijd3κijθϱ=12ϱij+ϱjibjkθkibikθkjbijϱ3+cijθ3lijϱ=12bjkϱki+bikϱkj+cijϱ3ζidθ=12θi+d3,i+bikdkmiθϱ=122ϱi+θ3,iniϱ=12bikϱk+ϱ3,iϖθ=θ3Pϱ=2ϱ3E34

Here, the tensors, γ¯¯and ζ¯, are called the membrane and shear strain tensors as defined in Eq. (31). The tensor χ¯¯is a generalization of the bending strain tensor, and k¯¯is a generalization of κ¯¯in Eq. (31), since θ3appears in the expressions of χ¯¯and k¯¯in Eq. (34). Because of different orders in ξ3in higher-order displacement vector, the newer tensors including l¯¯, m¯, n¯, ϖ¯, and p¯are obtained. In initial lesion model, the different orders in ξ3introduces complex interplay of various tensors. The continuous interplay among tensors of different orders makes it difficult to calculate resultant displacement, comprised of linear and rotational displacements. It becomes necessary to peruse algebra for weak formulation of this complex interplay of tensors. The variational formulation using a test function on displacement which aids to evaluate displacement equation in higher-order is

ΩHαβλμeαβDeλμΔdV=ΩF.ΔdV,E35

where the function, Δξ1ξ2ξ3, is called test function; for each ΔV(domain for initial lesion) there exists unique DVsuch that Eq. (35) holds:

Δξ1ξ2ξ3=δξ1ξ2+ξ3ηξ1ξ2+ξ32ςξ1ξ2E36

It obviously comes to mind: what are kinematical assumptions in initial lesion model? Keeping the histological and functional perspective of the vessel wall from the biomechanical point of view, it is known that internal surface of the vessel wall is not smooth. It becomes obvious that it will not follow banal kinematical assumptions as mentioned earlier. Note that the initial lesion of AD might be evolving on the tunica intima due to medial degeneration. The lesion presence is spatially nonlinear. It seems plausible that it is governed by quadratic equation as higher-order tensor has quadratic components. The equation for kinematical assumption in higher-order displacement equation, setting τ=2ξ3/t, is given by

D=ττ12dbot+1τ2dmid+ττ+12dtopE37

Since the internal lining is not smooth, a gestalt view of affected tunica intima has initial lesions at differing heights. Lesions are on the tunica intima surface. To localize spatial dimension of lesions across tunica intima surface, correction terms are to be introduced to tunica intima surface levels, viz. top, mid, and bottom in form of ττ1/2, 1τ2, and ττ+1/2, respectively.

## 4. Mathematical analysis of initial lesion

We did weak formulation to estimate strain tensors. Now, we assess net displacement. In order to do so, well-posedness of variational form (35) is the key. To understand the evolution of AD, the initial lesion from its inception to the advanced stage wherein the lesion contributes to nonlinear radial dilatation and marginal elongation of diseased aortic tissue needs to be evaluated. There are bounds to emergence of lesion, the lower bound is the status of primal lesion first noticed, and the upper bound is advanced stage of lesion that contributes to rupture of the aorta. Within these bounds, the blood flow acts on the lining of the aorta, adversely impacting the primal lesion that is susceptible to progression from lower bound to upper bound and contributing to the severity of disease.

The inherent nature of normal aortic tissue is to retain its earlier state despite varying interplay of tensors in higher-order. But this resistive tendency, called coercivity, weakens as primal lesion progresses towards upper bound. This transition from lower bound to upper bound depends on the complex interplay of various tensors in higher-order. Interestingly, the interplay between tensors in higher-order and coercivity is responsible for worsening of the disease. Intuitively, coercivity is inversely proportional to the progression towards upper bound. Thus, gaining information about the progression towards upper bound and concomitant decline in coercivity is vital to understand net displacement of initial lesion and progression of disease.

For a particular bound and coercivity for a test function Δδης, there exists a unique Ddθϱ, exemplifying a particular state of disease. Furthermore, there are various states of displacement of initial lesion due to progression of the disease. Such a compendium is used to characterize a particular displacement state. A higher-dimensional space, Sobolev spacewhich is comprised of all such possible combinations, comes handy. It is constituted of functions with sufficiently many derivative including partial differential equations of fluid-structure interaction and equipped with the norm that measures size and regularity of these functions. The test function Δδηςis a replica of Ddθϱin higher-dimensional metric space, V. Since test function is an idealized version of net displacement vector in continuum mechanics, evaluating the interaction between test function Δδηςand force Fyields insights about Ddθϱ. Δδηςis a test function present in Sobolev space. Gaining information about the characteristics of Δδης, we can infer about Ddθϱ. It yields insight about the disease process wherein with progression the initial lesion is contributed by the blood flow. Interestingly, proving well-posedness of Eq. (35) gives insights about Ddθϱpresent in bilinear function Adθϱδης, which is given by

Adθϱδης=ΩHαβλμeαβd+ξ3θ+ξ32ϱeλμδ+ξ3η+ξ32ςdV.E38

The linear function is given by

Fδης=ΩF.δ+ξ3η+ξ32ςdVE39

The specification of the displacement space is given by

V=δηςH1S×H1S×H1SC,E40

where H1is the Sobolev space of order 1, Cis space for boundary conditions.

Lemma 1. Let us considerδ,η¯H1Sand

(γ¯¯δ,χ¯¯δη¯,ζ¯δη¯=0¯¯0¯¯0¯onS.E41

Then, the displacement (36) in (higher-dimensional initial lesion body) corresponds to an infinitesimal rigid-body motion, i.e., there exists Tand Ra global translation vector and an infinitesimal rotation vector, respectively, such that

δξ1ξ2=T+Rφξ1ξ2;η¯ξ1ξ2=Rz3ξ1ξ2E42

Lemma 2. For anyξ1ξ2ξ3Ω, there exist two constantsc,C>0such that the following inequalities hold

czξ1ξ2gξ1ξ2ξ3Czξ1ξ2E43
czijξ1ξ2YiYjgijξ1ξ2ξ3YiYjCzijξ1ξ2YiYj,Y1Y2R2.E44
czikξ1ξ2zjlξ1ξ2YijYklgikξ1ξ2ξ3gjlξ1ξ2ξ3YijYklCzikξ1ξ2zjlξ1ξ2YijYkl,Y11Y12Y21Y22R4.E45

Lemma 3. The gradient of a vector field is on average not distant from the space of skew-symmetric matrices, the gradient must not be a far from a particular skew-symmetric matrices. Thus, there exists a constantδk>0such that for any first order surface tensorr¯H1S,

r¯H1Sδkϵ¯¯rL2S+r¯L2S,forϵ¯¯r=12¯¯r¯+¯¯r¯T,E46

where ϵ¯¯is symmetrized gradient tensor.

It is inferred from Lemma 2 that mapping of initial lesion is well-defined in curvilinear coordinate system wherein quantity gis volume measure. Also, Lemma 2 suggests that this function is well-defined and continuous. Because the initial lesion is defined over upper bound (C) and lower bound (c), the set of bounds is a compact set. The mid-surface of initial lesion definitely lies within the bounds. Thus, the characterization of initial lesion is well-defined. In order to comment on net displacement of the initial lesion during the progression of disease, we prove the following theorem to establish well-posedness of weak formulation for displacement vector.

Theorem 1. AssumeFL2;the essential boundary conditions enforced inVare such that no rigid-body motion is possible, i.e., the only elementδηςinVsatisfiesEq. (42)for someTRis000.

Then there exists a unique dθϱin Vthat satisfies

Adθϱδης=FδηςE47

for any δηςV, and we have

dθϱ1CFL2E48

Proof.We prove coercivity of Aand continuity of Aand F. Coercivity argument is explained in three steps. We shall write finstead of function fto make equations more compact.

(i) First, we prove

Adηςδηςγγ¯¯02+χ¯¯02+k¯¯02+l¯¯02+ζ¯02+m¯02+n¯02+ϖ02+p02.E49

From Eqs. (44) and (45), using gαβgλμeαβeλμ=gαβeαβ20, we have

AdηςδηςγΩgαβgλμeαβeλμdVγΩgikgjleijekl+gijei3ej3+e332dVγΩzikzjleijekl+zijei3ej3+e332dVE50

Now using Eqs. (43) and (33) and integrating through the thickness, we obtain

Adηςδηςγωt{zikzjl[γijγkl+t212χijχkl+t26γijkkl+t480kijkkl+t440lijχkl+t6448lijlkl]+ϖ2+t212p2+zijζiζj+t212mimj+t26ζinj+t480ninj}dSE51

To simplify the above expression, we use the following inequality:

ab12ηa2+1ηb2,η>0.E52

Now we have

t26zikzjlγijkkl=16γt2k112a1γε2+t4a1kε2112zikzjla1γijkkl+t4a1kijkkl,E53

and similarly

t440zikzjllijχkl180zikzjla2t6lijlkl+t2a2χijχkl.E54
t26zijζinj112zija3ζiζj+t4a3ninj,E55

where a1,a2,a3>0. Using suitable values of the constants, a1=a3=10, a2=6/35, and t>0, Eq. (51) becomes

Adηςδηςγω{zikzjlγijγkl+χijχkl+kijkkl+lijlkl+zijζiζj+mimj+ninj+ϖ2+p2}dSE56

Hence, Eq. (49) is proved. The bilinear function is bounded below by the sum of norm of strain tensors. This function for mid-surface is integrated through the thickness of the entire lesion giving semblance of the whole lesion.

(ii) Denoting

η3ς=m¯ης02+n¯ς02+k¯¯((0¯η3)ς)02+ϖη02+pς021/2E57

We now show that provides a norm equivalent to the H1-norm over certain subspace of the Sobolev space. Note that ϖη=pς=0gives η3=ς3=0and m¯ης=η3=0gives ς¯=0. Bounding the norm from above, we get

η3ςCη3ς1E58

and we get

η3ςγη3ς1E59

Using Lemma 3 and Eq. (34), we have

ς¯12Cε¯¯ς¯02+ς¯02Ck¯¯(0¯η3ς)02+b¯¯ς302+c¯¯η302+ς¯02Ck¯¯(0¯η3ς)02+ς302+η302+ς¯02E60

In addition, from the definition of n¯and m¯in Eq. (34), we have

ς312Cn¯ς02+ς¯02E61
η312Cm¯ης02+ς¯02E62

From Eqs. (60)(62), we obtain

η3ς¯12C(m¯ης02+k¯¯(0¯η)ς)02+n¯ς02+ς302+η302+ς¯02)Cη3ς2+η3ς02.E63

Perusing the norm of the gradient of vector fields, the setting of lower and upper bounds is tantamount to estimating attributes of lesion at the initial and advanced stages, respectively. The sequence of all lower bounds corresponds to the initial stage of disease prevalent in affected population. Similarly, the sequence of all upper bounds corresponds to the advanced stage of disease prevalent in terminally ill patients. Note that each of these sequences is uniformly bounded in the H1-norm. There exist a subsequence that converges to some limit for each of these sequences. The weak convergence in H1implies strong convergence in L2for the same norm to the same limit. Thus, the subsequence in L2-norm converges strongly. This gives a stronger result about the sequences of upper and lower bounds. Clinically, it indicates various patients might report, at different stages of disease owing to different reasons, their disease initiation be an element, which is a limit point of the subsequence of lower bound sequence. Note that primal lesion presence in any patient whatsoever can be traced back by the convergence of subsequence of lower bound sequence. Its corollary equivalently applies to the advanced stage of the disease.

(iii) Coercivity bound: Coercivity is the measure of the ability of the initial lesion to withstand an external fluid-structure interaction without undergoing deformation. It is obviously dependent on the intensity of hemodynamic forces applied to the lesion. Thus, coercivity bound is the limit point of the ability of initial lesion to withstand deformation. Note that in due course of the progression of the disease, the evolution of the lesion at each stage is dependent on the increment of coercivity bound. In normal circumstances, it seems plausible that with ascension towards upper bound, coercivity reduces. Thus, the evaluation of coercivity bound is relevant.

The inequality (52) is valid for any norm. Hence, we infer

v1+αv22+v22γv12+v22,E64

where αis any real number. Using this inequality (64), we obtain

χ¯¯δη02+ϖη02=χ¯¯(δ(η0)b¯¯η302+η302γ(χ¯¯(δη0))02+η302,E65

hence,

γ¯¯δ02+χ¯¯(δη)02+ζ¯(δη)02+ϖη02γ(γ¯¯δ02+ζ¯(δη)02+χ¯¯(δ(η0))02+η302γδη12+η302E66

SupposeFL2Sand the essential boundary conditions enforced inVare such that no rigid-body motion is possible, i.e., the only elementδη¯Vsatisfying(42)for someTR=00¯. Then bilinear formAis coercive overV.

k¯¯ης02+η¯12γ(k¯¯((0¯η3)ς)02+η¯12)E67

hence,

k¯¯ης02+η¯12+m¯(ης)02+n¯ς02+ϖη02+pς02γk¯¯(0¯η3ς)02+m¯(ης)02+n¯ς02+ϖη02+pς02+η¯12=γη3ς2+η¯12γη3ς12+η¯12.E68

Therefore, from Eqs. (49), (66), and (68), we have

Adηςδηςγγ02+χ02+k02+l02+ζ02+m02+n02+ϖ02+p02γδη¯12+η302k¯¯02+m02+n02++p02γδη¯12+η3ς12=γδης12.E69

The analysis about coercivity bound suggested that it is not membrane strain tensor alone which progressively alters the structural characteristics of the initial lesion. Rather it is the complex interplay of various tensors in Eq. (34) that breaks the coercivity bound at a particular stage of the disease.

(iv) Completion of the proof.

Since we have proved boundedness and coercivity of the initial lesion, the continuity of the variational formulation can be derived from the continuity of linear function (39) related to test function Δδης. There is merit in proving the continuity of variational formulation because such continuous functions within closed interval are bounded:

ΩFδ+ξ3η+ξ32ςdVFL2δ+ξ3η+ξ32ςL2FL2δης0.E70

Then, from the H1-coercivity of Ainfer

γdθϱ12Adθϱdθϱ=FdθϱCFL2dθϱ0.E71

Hence, we infer Eq. (48) directly follows.□

The primary result of this section is sufficient conditions for the variational formulation (35) which is proved well-posed. In initial lesion model, a fluid-structure interaction modeled by using bilinear and linear functions specified over displacement is well-posed. Any transverse point-wise loading in H1for any lesion implies transverse displacement in H1. Clinically, progressive interaction of various tensors within lower and upper bounds implies changes in coercivity bounds. It is suggestive of progression of the disease. On the other hand, a fracture in internal lining of vessel wall around the lesion causing blood to flow between tunica intima and tunica media. This flow either remains static (if there is non-patent false lumen) or flow out (if there is a patent false lumen track). Thus, the merit of well-posedness of variational formulation (35) cannot be overemphasized.

## 5. Asymptotic analysis of the initial lesion

We aim to discuss the asymptotic behavior of initial lesion model. The initial lesion continues to temporally evolve under the influence of fluid-structure interaction; the asymptotic analysis is helpful in this regard. The nonlinearity of progression of the disease can be assessed by formulating bending strain cases because membrane and shear strain vanish with the strain ϖη, wherein η0for the test function Δδηςin space V. Let us introduce the space of pure-bending displacements:

V0=δηςVγijδ=0ζiδη=0ij=12.E72

Based on peculiar geometry and associated bounds, the initial lesion may or may not have nonzero pure-bending displacements. Situation 1, when pure bending is inhibited

V0δηςV=0,0,0,E73

and situation 2, when pure bending is non-inhibited

V0δηςV0,0,0,E74

Let us define higher-dimensional body force as

F=ερ1G,E75

where the exponent (ρ1) is used for consistency when the external work involves an integration over the thickness which is relevant for general asymptotic analysis; Grepresents a force field:

Gξ1ξ2ξ3=G0ξ1ξ2+ξ3Bξ1ξ2ξ3,E76

where G0is in L2Sand Bis a uniformly bounded function over in t. Since it is improbable to obtain strong convergence result in context of asymptotic analysis, we make weaker assumption about G. We also forgo regularity assumption in context of weak convergence to introduce abstract bilinear forms. Depending upon boundary conditions, nonzero pure-bending displacements of initial lesion are assessed. The displacement is in response to inhibited and non-inhibited pure-bending lesion as we have already argued that only bending strain matters in asymptotic analysis. In the current framework of asymptotic analysis for initial lesion of a given thickness, specific membrane-dominated bilinear form is given by

Amdθδη=ωl[0Hijklγijdγklδ+0Hij33γijdϖη+γijδϖθ+40Hi3j3ζidθζjdη+0H3333ϖθϖη]dS,E77

bending-dominated bilinear form is given by

Ab(d,θ,ϱ;δ,η,ς)=ωl3120Hijklχij(d,θ)χkl(δ,η)+0Hij33(χij(d,θ)p(ς)+χij(δ,η)p(ϱ))+40Hi3j3mi(θ,ϱ)mj(η,ς)+0H3333p(ϱ)p(ς)]dS,E78

where the tensor 0His defined by

0Hαβλμ=Hαβλμξ3=0,

and linear form is given by

Gδ=ωlG0δdS.

We now discuss the cases of non-inhibited pure bending versus inhibited pure bending.

### 5.1 The impact of non-inhibited pure bending on the initial lesion

Assume that Vdisplacement space for the initial lesion contains few nonzero elements. The terms of order zero in ξ3in the strain Eq. (33) vanishes by a penalization mechanism, and the appropriate scaling factor is then ρ=3. We define the norm

δηςb=δ12+η¯12+η302+ς302+ς+12¯η30212E79

for which the convergence is anticipated. Since dεθερεis uniformly bounded in the norm b, we extract a subsequence weakly converging in Vto a limit dwθwϱw. Since in the early stage of the disease, the internal lining of the vessel wall, tunica intima, is smooth, we can expand the constitutive tensor:

Hαβλμξ1ξ2ξ3=0Hαβλμξ1ξ2+ξ3H¯αβλμξ1ξ2ξ3,E80

where H¯αβλμξ1ξ2ξ3is bounded over initial lesion body . Using the uniform boundedness of εdεθεϱε1, we get

limε01εAdεθερεδης=Amdwθwδη,E81

where Amis the bilinear form to assess net displacement caused by the membrane strain. This is equivalent to

1εAdεθεϱεδης=1εΩF.δ+ξ3η+ξ32ςdVCε2δηςb+Cε2δης0.E82

When δηςis fixed in V, we get

Amdwθwδη=0δηςV.E83

Using equivalence relations among norms and semi-norms, infer that dwθwϱwV. This result (83) shows that bilinear form for the membrane strain tensor vanishes. In this case, non-inhibited pure bending, bending strain tensor predominates whose bilinear form is given by

Abdwθwϱwδης=Gδ,δηςV0.E84

Eq. (84) equivalently holds for any δηςV0(pure-bending subspace of initial lesion). The uniqueness of solution implies that dwθwϱw=d0θ0ϱ0. If Eq. (83) equivalently holds for any weakly converging subsequence dwθwϱw, we affirmatively conclude that the whole sequence converges weakly to d0θ0ϱ0.

### 5.2 The impact of inhibited pure bending on the initial lesion

We define pure-bending subspace V#, of displacement space Vfor initial lesion such that

V#=δηδη0V.

In this case, pure bending is inhibited; mgives a norm in pure-bending subspace V#such that

δηm=γ¯¯δ0+ζ¯(δη)0+ϖη0.

Since dεθεis uniformly bounded in pure membrane subspace of displacement space for initial lesion, ε2δηςis uniformly bounded in H1S; we infer that the sequence dε+t212ςθεis also uniformly bounded in V. Due to the weak convergence in pure membrane subspace Vm,

γ¯¯dε+t212ϱεζ¯dε+t212ϱεθεϖθεε0γ¯¯dwζ¯dwθwϖθw,

converges weakly in L2S. Hence, for any fixed δηςin displacement space V, we infer

limε01εAdεθεϱεδης=Amdwθwδη.E85

We have

1εAdεθεϱεδης=Gδ+Rε.E86

Here, Rε0when ε0. As δηςis fixed, we infer

Amdwθwδη=GδδηV.E87

Eq. (87) equivalently holds for any δηVm(membrane subspace of initial lesion). From the uniqueness of the weak convergence result, it follows that dwθw=dmθm. If this equivalently holds for any weakly converging subsequence dwθwϱw, we affirmatively conclude that the whole sequence dε+t212ςθεconverges weakly to dmθmin Vm.

Finally, asymptotic analysis, both types of initial lesion problems, including case of non-inhibited pure bending and case of inhibited pure bending, has weak convergence. Asymptotic analysis revealed that initial lesion is bending-dominated when pure bending is non-inhibited and that initial lesion is membrane-dominated when pure bending is inhibited. Clinically, the primal lesion undergoes transformations under the influence of membrane, bending, and shear tensors. In advanced stages, the transition towards upper bound occurs due to change in coercivity bounds. During the advanced stages of disease, the bending is responsible for introducing progressive disarray of collagen fibers, smooth muscle cells, and ground matrix and thus contributes to rapid progression. Asymptotic analysis suggests that bending strain is relevant for the progression of disease in advanced stages. Hence, asymptotic analysis is a valuable technique for theoretical supplementation to model building and provide insights into the behavior of initial lesion.

Advertisement

## 6. Concluding remarks

### 6.1 Conclusion

We constructed the model by using higher-order kinematical assumptions relevant to human cardiovascular system. We called this model the initial lesion model. The weak convergence of the solution to initial lesion model was mathematically substantiated. In the analysis of the initial lesion, we concentrated to seek biological and mathematical insights in order to understand early stages of AD. A general understanding of evolution of initial lesion in aortic dissection is presented. The results presented in this chapter are relevant for the assessment of shell-type lesion in biological systems including human physiology and pathology. At least two observations are to be noted. First, the mathematical analysis of the initial lesion model is distinct from classical shell models. Second, the asymptotic analysis of the initial lesion model is based on degenerating three-dimensional continuum to bending strains to initial lesion behavior. For very thin shells as seen in human vessels’ internal lining, the analytical perspective to the initial lesion model given in this chapter can be used in the convergence studies.

### 6.2 Future scope

Clinically complex situations such as the formation of false lumen either blind or patent in advanced stage of AD merit mathematical analysis perusing coercivity bounds.

## Download for free

chapter PDF
Citations in RIS format
Citations in bibtex format

## More

© 2020 The Author(s). Licensee IntechOpen. This chapter is distributed under the terms of the Creative Commons Attribution 3.0 License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

## How to cite and reference

### Cite this chapter Copy to clipboard

Vishakha Jadaun and Nitin Raja Singh (January 3rd 2020). Mathematical Modeling and Well-Posedness of Three-Dimensional Shell in Disorders of Human Vascular System, Nonlinear Systems -Theoretical Aspects and Recent Applications, Walter Legnani and Terry E. Moschandreou, IntechOpen, DOI: 10.5772/intechopen.89866. Available from:

### chapter statistics

243total chapter downloads

### More statistics for editors and authors

Login to your personal dashboard for more detailed statistics on your publications.

### Related Content

Next chapter

#### Problems of Control Motion of Solar Sail Spacecraft in the Photogravitational Fields

By Vladimir Stepanovich Korolev, Elena Nikolaevna Polyakhova and Irina Yurievna Pototskaya

First chapter

#### Applications of 2D Padé Approximants in Nonlinear Shell Theory: Stability Calculation and Experimental Justification

By Igor Andrianov, Jan Awrejcewicz and Victor Olevs’kyy

We are IntechOpen, the world's leading publisher of Open Access books. Built by scientists, for scientists. Our readership spans scientists, professors, researchers, librarians, and students, as well as business professionals. We share our knowledge and peer-reveiwed research papers with libraries, scientific and engineering societies, and also work with corporate R&D departments and government entities.