Open access peer-reviewed Edited Volume

Natural and Artificial Fiber-Reinforced Composites as Renewable Sources

Edited by Ezgi Günay

Gazi University

Nano- and micro-sized natural fibers of vegetable origin are fully biodegradable in nature. However, the nano- and micro-sized synthetic fibers are fully man-made. Fiber-reinforced composites composed of stiffened fiber and matrix are well-known engineering materials. Fiber-reinforced materials have been used in industrial production. Natural fibers can be obtained from many sources in nature such as wool, sisal, ramie, kenaf, jute, hemp, grass, flax, cotton, coir, bamboo and abaca, banana, and sugarcane bagasse. Artificial fibers have been produced from more stiff materials such as glass, single-walled carbon nanotubes, double-walled carbon nanotubes, carbon, aramid, boron and polyethylene (PE). The cyclic reusability of materials is an important qualification in protecting the environment from waste pollution. Three important factors can be mentioned in terms of material properties in the recycling process. The first factor is "the rate of cyclic usage," the second one is "less material loss in each recycle," and the last one is "the role of waste products in the self-renewal of ecosystem." In engineering area, the usage of waste materials has taken into account in production of composite materials. The use of waste materials as particulate-type composite production is also possible in the industry. Fiber-reinforced materials can be grouped into two categories: "the natural fiber-reinforced materials" and "the artificially produced fiber-reinforced materials." Finally, we conclude that this book consists of mainly summarized three subject headings within the two specific book subsections : The first group contains the main subjects related to the natural and artificial fibers obtained by literature review; second, experimental and numerical studies are made in order to perform the necessary arrangements in the production stages and to establish a decision mechanism on the specification of the technical properties of the fiber-reinforced composites. The third group of studies focused on the use of sustainable bio-composites and recycled textile wastes as reinforcements in construction.

Read more >Order hardcopy
IntechOpen
Natural and Artificial Fiber-Reinforced Composites as Renewable SourcesEdited by Ezgi Günay

Published: May 2nd 2018

DOI: 10.5772/intechopen.68740

ISBN: 978-1-78923-061-1

Print ISBN: 978-1-78923-060-4

eBook (PDF) ISBN: 978-1-83881-352-9

Copyright year: 2018

Books open for chapter submissions

3393 Total Chapter Downloads

3 Dimensions Citations

chaptersDownloads

Open access peer-reviewed

1. Introductory Chapter: Natural Fiber Plastic Composites - A Brief Review

By Ezgi Günay

484

Open access peer-reviewed

2. Interfacial Modification of Hemp Fiber–Reinforced Composites

By Yekta Karaduman, Huseyin Ozdemir, Nesrin Sahbaz Karaduman and Gokce Ozdemir

409

Open access peer-reviewed

3. Development of Hemp Fibers: The Key Components of Hemp Plastic Composites

By Chernova Tatyana, Mikshina Polina, Salnikov Vadim, Ageeva Marina, Ibragimova Nadezda, Sautkina Olga and Gorshkova Tatyana

516

Open access peer-reviewed

4. Effect of Fiber Waviness on Tensile Properties of Sliver-Based Natural Fiber Composites

By Taweesak Piyatuchsananon, Baosheng Ren and Koichi Goda

300

Open access peer-reviewed

5. Mechanical and Fracture Surface Analysis of Higher Viscous Epoxy/Multiwalled Carbon Nanotube Nanocomposites Subjected to Flexural Loading

By Aidy Ali, Risby M. Sohaimi and Ahmad H. Muhammad Ismail

303

Open access peer-reviewed

6. Waste and Recycled Textiles as Reinforcements of Building Materials

By Patricia Peña Pichardo, Gonzalo Martínez-Barrera, Miguel Martínez- López, Fernando Ureña-Núñez and Liliana I. Ávila-Córdoba

419

Open access peer-reviewed

7. Natural Fibers for Sustainable Bio-Composites

By Tri-Dung Ngo

969

Edited Volume and chapters are indexed in

  • Worldcat
  • OpenAIRE
  • Google Scholar
  • AZ ebsco
  • Base
  • CNKI

Order a hardcopy of the Edited Volume

Free shipping with DHL Express

Hardcover (ex. VAT)£140

Order now

Residents of European Union countries need to add a Book Value-Added Tax of 5%. Institutions and companies, registered as VAT taxable entities in their own EU member state, will not pay VAT by providing IntechOpen with their VAT registration number. This is made possible by the EU reverse charge method.

Special discount for IntechOpen contributors

All IntechOpen contributors are offered special discounts starting at 40% OFF available through your personal dashboard

Login and purchase