Comparison of three different versions of the “minimal genome”. Adapted with minor modifications (additional columns have been removed) from Henry et al. (2010), with permission from Wiley.
1. Introduction
Minimal cells can be defined as those compartment-based systems containing the minimal and sufficient number of molecular components and still displaying the essential features (structure and functions) of natural living cells (Luisi et al., 2006). The research on minimal cells, in recent years, has attracted the attention of several groups, as witnessed by the increasing number of reports and reviews published on the subject, as well as a dedicated book (Stano & Luisi, 2011).
The concept of minimal cell in biology, however, is not new. Looking at the astonishing genetic and metabolic complexity of simplest living organisms, such as unicellular microbes, one might ask whether such complexity is really a necessary condition for life, or whether life is compatible with a simplest organization (Morowitz, 1992; Knoll et al., 1999). This question has its root in the field of origin and evolution of life, considering that modern sophisticated cells derive from million years of evolution, and that primitive cell could not be as complex as modern ones. Together with a theoretical approach, an experimental approach is needed to investigate the realm of minimal cells. Initially developed within the origin of life community, the construction of minimal cell models not only tries to answer the question of the minimal complexity for living organisms, but also focuses on the assembly steps (from separated molecules to organized compartments). At this aim, several studies have been carried out to build, like a chemist would do, minimal cell models from an appropriate compartment (such as micelles, or vesicles) and certain solutes. In addition to studies where very simple chemicals are used for building such structures, particularly promising seems the use of enzymes, RNAs, DNAs. In fact, it is easier to build typical cell functions from these “modern” components (Fig. 1). When evolved molecules, as those listed above, are used to construct a minimal cell in a synthetic compartment, such as a lipid vesicle, it is convenient to call these constructions as “semi-synthetic” minimal cells (SSMCs).
More recently, however, the “minimal cell project” became one of the well-recognized topics of synthetic biology (De Lorenzo & Danchin, 2008), where – however – it might assume a slightly different connotation. In fact, top-down approaches, typical of this new discipline, aim at reducing the complexity of extant cells by removing unessential parts, typically by genetic engineering and metabolic engineering. The progress in genome synthesis brought about the assembly of a synthetic genome, which has then transferred to a genome-deprived cell (Gibson et al., 2010). On the other hand, the semi-synthetic approach – which is discussed in this review - can be classified as bottom-up, because it starts from simple molecules and aims at constructing a cell. In the following, we will first introduce the theoretical framework for understanding what is the essential dynamics of a living cell, then quickly review some aspects of the minimal genome, and later discuss in details some recent experimental studies. Finally, we will see how SSMCs could be used in the future as biotechnological tool.
2. Minimal life from the autopoietic perspective
The starting point for the analysis of minimal living properties is the theory of autopoiesis (self-production). Developed by Humberto Maturana and Francisco Varela in the Seventies (Varela et al., 1974), autopoiesis is a theory that focuses on the essential dynamics of a single cell. It does not describe how a cell originates, but just how it functions. First of all it is recognized that a cell is a confined system composed by interacting molecules, and that the essential feature of a living cell is the maintenance of its own individuality. Several transformations take place inside its boundary. Thanks to the continuous construction and replacement of internal components (boundary molecules included), and thank to this internal activity only, the cell maintains its state within a range of parameters, which are compatible with the existence and the good functioning of the set of transformation occurring inside. So, despite the continuous regeneration of all its parts, an autopoietic cell maintains its individuality because the structural and functional organizations do not change. What is continuously changed is the material implementation of these organizations. It is easy to draw a minimal autopoietic unit that obeys to this mechanism (Fig. 2).
Notice that in autopoiesis there is no need to specify the role of DNA, RNA, etc., these molecules act as elements of the internal networks aiming to keep the dynamic organization of internal transformations. The blueprint for the cell life consists of processes that produce all cell components that in turn produce the processes that produce such components, … Clearly, all this occurs at the expense of energy and nutrients from the environment, so that the living cell is, thermodynamically speaking, an open system, yet characterized by its own operational closure (no external information is needed to organize and reproduce itself from inside).
The first attempts to create a minimal chemical autopoietic systems were done with simple supramolecular systems as micelles and reverse micelles, and later on with vesicles (for a recent review, see Stano & Luisi (2010a). The comment on such systems is outside the scope of this chapter, but it is useful to say that the current research of SSMCs construction still relies on the autopoiesis as a theoretical framework. The initial micelle/vesicle systems are taken as basic model to develop more complex design, based on the general scheme of Fig. 2, by substituting the abstract X, Y, Z, and M components with real (bio)chemical species that are able to function as a network of minimal complexity.
3. Minimal genome
Mushegian & Koonin, 1999 | Gil et al., 2004 | Forster & Church, 2006 | |
Amino acids and derivatives | 3 | 0 | 0 |
Carbohydrate metabolism | 21 | 14 | 0 |
Cell division and cell cycle | 7 | 9 | 0 |
Cell wall and capsule | 6 | 0 | 0 |
Cofactors, vitamins, prosthetic groups, pigments | 8 | 15 | 0 |
DNA recombination and repair | 5 | 3 | 0 |
DNA replication machinery | 17 | 17 | 4 |
Electron transport chain | 10 | 9 | 0 |
Fatty acids and lipids | 7 | 7 | 0 |
Nucleoside and nucleotides | 21 | 15 | 0 |
Protein biosynthesis | 76 | 67 | 71 |
Protein folding | 9 | 5 | 2 |
Protein turnover | 1 | 2 | 0 |
RNA processing and modification | 2 | 3 | 2 |
Transcription machinery | 7 | 7 | 4 |
Transmembrane transport | 19 | 4 | 0 |
tRNA synthesis and modification | 26 | 27 | 25 |
Unclear/uncharacterized functions | 6 | 4 | 1 |
When we ask how a SSMCs can be constructed, we look at what are the minimal number of functions that have to be implemented into a minimal cell. The concept of “minimal genome” is clearly linked to this aspect. If we would like to employ proteins as function-carrying molecules, the only way we know for generating them is decoding the DNA sequence. So, specifying what is the minimal number of functions in a minimal cell is equivalent to specify the minimal number of genes required to codify such functions. The concept of minimal genome is also a very well discussed topic in biology. Several studies and reviews have been published (Mushegian & Koonin, 1996; Gil et al., 2004; Islas et al., 2004; Forster & Church, 2006; Fehér et al., 2007; Moya et al., 2009; Henry et al., 2010).
As it can be seen, the largest group of genes refers to protein biosynthesis, a pathway that involves the ribosomes, the essential and complex molecular machine that is the very cornerstone of cell function. tRNA-related genes are also numerous, as well as DNA replication. It is clear that the minimal genome essentially encodes the instruction for translating and duplicating the genetic information. Consider for example that in very permissive conditions a minimal cell could take energy and low molecular weight compounds from the environment, so that all genes required to accomplish these functions can be removed from the list of Table 1. It is evident that the essential part of the genome is that one dedicated to the production of internal components that reciprocally produce each other (from DNA to protein, from protein to DNA), plus those dedicated for boundary production, as requested by the autopoietic theory. In other words, under the constrains of current biochemical routes, the minimal genome should correspond to the minimal circuitry needed to establish a self-maintenance autopoietic dynamics. A further simplification would be possible only by removing these constraints, for example (hypothetically) by reducing the number of amino acids, or using a single enzyme for carrying out multiple functions, or by reducing the complexity of ribosomes.
Even considering the very small number of ca. 100 genes (Forster & Church, 2006), it is probably difficult to imagine the construction of a viable minimal cell. To date, the figure of 100 genes is still far beyond the current experimental approaches, where, as it will be shown in next paragraphs, a maximum of two genes have been simultaneously expressed inside lipid vesicles.
To conclude, it is useful to remark that the goal of defining (and synthesizing) a minimal genome can have – in addition to the theoretical conclusions for minimal cell bottom-up studies – some practical applications, especially in synthetic biology. For example, Henry et al. (2010) emphasize that the creation of a minimal organism (intended here as derived from the top-down approach) could be significant; for example the lack of mobile DNA elements might alleviate difficulties in controlling industrial bacteria strains; the lack of competing metabolic pathways might increase the net conversion yield of a desired product, or avoid the production of toxic side-products; the reduction of transcriptional regulation might favor the efforts to engineer minimal microorganisms.
4. A roadmap to the construction of minimal cells
The minimal genome analysis shown in the previous section has revealed that in order to build a SSMC – possibly living, although certainly “limping” (Luisi et al., 2006) – about 100 different genes must be encapsulated into lipid vesicles, and all of them must be transcripted and translated into functional proteins. At this aim, a new technology must be developed. To date, this technology comes from the convergence of
The zero-th step is clearly the control of liposome technology, in terms of liposome formation and manipulation methods, solute encapsulation, and detection methods. This will be discussed more in details in next paragraph.
Then we can imagine a stepwise advancement, from simple enzyme-inside-vesicle systems to more elaborated ones, based on gene expression inside vesicles. Investigation on one-enzyme-containing vesicles is already well developed, and a variety of enzymes have been entrapped into lipid vesicles (alkaline phosphatase, amylase, asparaginase, chymotrypsin, elastase, galactosidase, lysozyme, pepsin, perossidase, glucose oxidase, glucose-6-phosphate-dehydrogenase, hexokinase, glucuronidase, phosphotriesterase, superoxide dismutase, tyrosinase, urease, carbonic anhydrase, luciferase, lipase, etc. For a recently published review, see Walde & Ichikawa, 2001). Much more limited is the progress in coentrapping several enzymes inside liposomes. After a pioneering study of Chang (1987) on cycling enzymatic routes inside non-lipid compartments (for example, the coupled system: urease, glutamate dehydrogenase, glucose dehydrogenase, glutamate-pyruvate transaminase), more recent approaches have been based on liposomes and polymersomes. Typical examples are glucose oxidase and horseradish peroxidase inside liposomes (Hill et al., 1997; Kaszuba & Jones, 1999) or polymersomes (Delaittre et al., 2009; van Dongen et al., 2009), possibly with the involvement of a third enzyme (a lipase). The other system that has received attention is the couple bacterhodopsin/ATP synthase (both membrane proteins) that have been reconstituted in liposomes at the aim of producing ATP after irradiation (Freisleben et al., 1995; Pitard et al., 1996; Choi and Montemagno, 2007). With respect to the control of vesicle membrane permeability, it is worth mentioning the increase of passive permeability of detergent-doped membranes (the concentration of detergent is below the lytic regime, Oberholzer et al., 1999; Treyer et al., 2002), and the use of -hemolysis (Noireaux & Libchaber, 2004) or porines (Graff et al., 2001; Vamvakaki et al., 2005; Yoshimoto et al., 2005) as channel-forming agents.
The next step along the road map for SSMC construction is the realization of nucleic acid-based reactions inside liposomes. These have been already carried out, as in the case of DNA synthesis (PCR inside liposomes, Oberholzer et al., 1995), DNA transcription (RNA synthesis, Tsumoto et al., 2001), RNA replication (Kita et al., 2008), and the coupled transcription/translation reactions (protein synthesis). In particular, the protein synthesis is currently the most well studied reaction inside liposomes (for references, see paragraph Nr. 6). The current interest in protein synthesis fits well with the fact that this “module” is the most important for minimal cell construction, as also evident from the minimal genome analysis. The goal of ribosome production inside liposomes has not been reached, although some preliminary attempts have been anticipated (Jewett and Church, unpublished data presented at the 4th Synthetic Biology conference, Hong Kong 2008).
By further increasing the complexity of minimal cell models, one can think to move to cyclic reactions, where the focus is on the regeneration of cell components. These can be distinguished between “core” components (DNA, RNA, ribosomes) and “shell” components (lipids). Clearly, for a successful cell reproduction, both core and shell parts should be generated from inside, possibly in coordinate manner. Early enzyme-catalyzed attempts for synthesizing lipids inside liposomes have been reported (Schmidli et al., 1991). Kuruma et al. (2008) have recently updated this research by expressing the enzymes of interests (two acyl transferases) from the corresponding DNA sequences (see below). The ultimate goal of core-and-shell reproduction is the observation of SSMCs growth and division as it happens in natural cells, clearly with a reduced efficiency.
Finally, it is possible to conceive compartimentalized molecular systems that display really complex dynamics such as homeostasis (for a simple example, see Zepik et al., 2001), sensing and communication (Gardner et al., 2009), energy production, control of genetic transcription, for example thanks to genetic circuitry (Noireaux et al., 2003; Kim & Winfree, 2011).
5. The technology for building minimal cells
As stated before, the current SSMC technology is based on liposome technology and on cell-free systems. Essentially, the critical point is how to insert – possibly under control – the desired solutes inside lipid vesicles.
Let us start to consider the liposome technology. In principle there are three ways to operate (Fig. 4). The simplest approach consists into the spontaneous vesicle formation in a solution containing all solutes of interest (Fig. 4A). Currently, this is the most used procedure, and involves different preparation methods (lipid film hydration, freeze-dried liposome rehydration, ethanol injection (New, 1990). Current drug delivery technology, which is the most advanced branch of liposome technology, is also based on the spontaneous formation of solute-filled liposomes (only in the special case of weak bases an “active” loading method has been developed, Haran et al., 1993). In general terms, the apparently simple process described in Fig. 4A is still not well understood, due to the complexity of solute/membrane interactions and to not well-known subtle effects deriving from the interplay of chemical and physical factors during the vesicle formation. In fact, it has been recently discovered that a large heterogeneity exist in a population of vesicles prepared by these methods (Dominak & Keating, 2007; Lohse et al., 2008). A clear-cut evidence of superconcentration of proteins inside lipid vesicles has been reported in the case of ferritin (Luisi et al., 2010).
A second approach is described in Fig. 4B and consists into the physical insertion of the solutes of interest inside a large vesicle (giant vesicle), by means of microinjection methods. This technique was developed in the Nineties (Wick et al., 1996; Bucher et al., 1998; Fischer et al., 2002) and offer the unique possibility of a total control of vesicle composition, but it could be hindered by technical difficulties, and by the fact that only a limited number of vesicles can be prepared and observed.
A third approach (Fig. 4C) is instead innovative and it is based on the recent success in preparing giant vesicles from water-in-oil droplets (Pautot et al., 2003ab). Some SSMC work has already be done by preparing vesicles with this method (Yamada et al., 2006; Pontani et al., 2009; Saito et al., 2009). Firstly, solutes are emulsified in a hydrocarbon solvent
containing lipids. This brings to the formation of lipid-stabilized water-in-oil droplets, where lipids are oriented with the polar head-groups toward the droplet core, and with the tails toward the apolar solvent. A second lipid-containing apolar solution is stratified over an aqueous phase, so that a lipid interface is spontaneously generated at the oil-water interface. When a water-in-oil droplet crosses the water-oil interface, it becomes covered by a second lipid layer, and is then transformed into a giant vesicle when reaches the aqueous phase (on the bottom). The process is enhanced by centrifugation, taking advantage of the higher water density when compared with hydrocarbons. In this way, solutes initially present in the water-in-oil droplets (where 100% compartmentalization is easy to achieve) are found inside giant vesicles. This methodology has been recently implemented in microfluidic devices.
The use of microfluidic devices seems very promising in SSMC technology, although not well developed when compared with the amount of work done with water-in-oil droplets. Here the advantage should be the control of vesicle production (uniform size, morphology, and lamellarity) and especially the control of vesicle content. Two interesting example of pioneering research are shown in Fig. 5. In the first case (Fig. 5A) giant vesicles have been
Component | Conc. | Component | Conc. |
ProRS | 1300 U/mL | ||
IF1 | 2.7 M | SerRS | 1900 U/mL |
IF2 | 0.4 M | ThrRS | 1300 U/mL |
IF3 | 1.5 M | TrpRS | 630 U/mL |
EF-G | 0.26 M | TyrRS | 630 U/mL |
EF-Tu | 0.92 M | ValRS | 3100 U/mL |
EF-Ts | 0.66 M | ||
RF1 | 0.25 M | ||
RF2 | 0.24 M | MTF | 4500 U/mL |
RF3 | 0.17 M | Ribosomes | 1.2 M |
RRF | 0.5 M | Creatine kinase | 4 g/mL |
Myokinase | 3 g/mL | ||
Nucleoside diphosphate kinase | 1.1 g/mL | ||
AlaRS | 1900 U/mL | Pyrophosphatase | 2 U/mL |
ArgRS | 2500 U/mL | T7 RNA polymerase | 10 g/mL |
AsnRS | 20 mg/mL | ||
AspRS | 2500 U/mL | Energy sources | |
CysRS | 630 U/mL | ATP | 2 mM |
GlnRS | 1300 U/mL | GTP | 2 mM |
GluRS | 1900 U/mL | CTP | 1 mM |
GlyRS | 5000 U/mL | UTP | 1 mM |
HisRS | 630 U/mL | Creatine phosphate | 20 mM |
IleRS | 2500 U/mL | ||
LeuRS | 3800 U/mL | ||
LysRS | 3800 U/mL | 20 amino acids | 0.3 mM |
MetRS | 6300 U/mL | 10-formyl-5,6,7,8-tetrahydrofolic acid | 10 mg/mL |
PheRS | 1300 U/mL | tRNAmix (Roche) | 56 Abs260 |
produced from two aqueous phases separated by a pre-formed lipid-rich micro-interface (Ota et al., 2009). The gentle flow of internal aqueous phase produces an elongated compartment that eventually breaks to give a giant vesicle. The proper design of an obstacle along the flow is essential to observe the desired pattern. Giant vesicles of average diameter 16.5 m ( 3.7%) are produced. In the second case (Fig. 5B), the droplet transfer method has been implemented in a microfluidic channel (Matosevic & Paegel, 2011). Water-in-oil droplets, also generated within the microfluidic device tangentially flows against an aqueous phase which will constitute the external vesicle phase. A properly designed obstacle forces each water-in-oil droplet to cross the oil/water interface and become transformed into a vesicle, whereas the excess oil ends in a side channel. Vesicles with size from 20 to 70 m can be generated, be vesicle size being controlled by the water-in-oil droplet size.
The second aspect to discuss is the
kit would be advisable. In 2001, the group of Takuya Ueda at the Tokyo University has formulated a ‘‘reconstituted’’ cell-free transcription and translation system from purified
Notice that for synthesizing a protein inside liposomes, these 83 different macromolecules (at least 1 molecule of each species) should be co-entrapped in the liposome. The probability of such occurrence has been calculated on the basis of Poisson distribution, as a function of vesicle size (Souza et al., 2009), and assumes an experimentally significant value (>5%) for vesicle diameters > 600 nm.
Starting from 2006, the use of PURE system for synthesizing a protein inside liposomes has become the benchmark for SSMCs construction (Sunami et al., 2006; Murtas et al., 2007), even if the yield of produced protein is typically one third when compared with cell extracts (Hillebrecht & Chong, 2008). Interestingly, we can look at the PURE system as a synthetic biology tool from the viewpoint of “standard biological parts” (http://partsregistry.org/Main_Page).
6. Four commented examples of current research
As stated above, the current state-of-the-art of SSMC research is the expression of functional proteins inside liposomes. This very specific research area has already a rich chronology of reports, starting from the pioneering study of Oberholzer et al. (1999), who synthesize poly(Phe) inside vesicles starting from the corresponding messenger poly(U). Several reviews have been compiled to discuss the advancement in the field (Luisi et al., 2006; Chiarabelli et al., 2009; Stano & Luisi, 2010b), so that these aspects will not be repeated here. Rather, here we would like to comment four very relevant studies done in the last years, namely: (i) genetic cascade reaction inside liposomes; (ii) inside-vesicle production of a pore forming compound; (iii) synthesis of membrane enzymes (lipid-producing) inside liposomes; and (iv) RNA replication by RNA-encoded Q-replicase.
The first case to discuss is a work from the Yomo group in Osaka, see Fig. 6A (Ishikawa et al., 2004). In this work the authors designed a two-stages cascade reaction inside liposomes. In particular the idea to have a DNA plasmid encoding for two proteins, namely T7 RNA polymerase and the green fluorescent protein (GFP). The corresponding genes, however, were under different promoters (SP6 and T7, respectively), so that the following cascade genetic reactions could happen. The plasmid was mixed with cell-free extracts enriched with SP6 RNA polymerase. This first polymerase acts on the first gene (SP6-
The second interesting case comes from the Libchaber laboratory in New York, see Fig. 6B (Noireaux & Libchaber, 2004). The authors designed a lipid vesicle containing the gene of -hemolysin (from
The third case comes from our laboratory in Rome, see Fig. 7A (Kuruma et al. 2009). This work was inspired by a previous study done on lipid-synthesizing enzymes inside vesicles, at the aim of creating a lipid-producing liposome (Schmidli et al., 1991). The route consisted into four enzyme-catalyzed steps, namely, from glycerol-3-phosphate (G3P) to lysophosphatidic acid (LPA), to phosphatidic acid (PA), to diacylglycerol, to phosphatidylcholine (PC). The 1991 work consisted in inserting the four enzymes that catalyzes this route into lipid vesicles and observe the production of PC starting from G3P and acylcoenzymes A. However the efficient production of PC was observed only in the case of short chain acyls, and the yield was around 10%. In the work of Kuruma et al. (2009)
a different approach was tested. In particular the genes for the first two enzymes, called glycerol-3-phosphate acyltransferase (GPAT) and lysophosphatidic acid acyltransferase (LPAAT), were co-entrapped with the PURE system inside lipid vesicles of proper membrane chemical composition. The latter was a critical parameter because the lipids used to build the liposome should: (
Finally, an important example of SSMC work comes again from the laboratory of Yomo and coworkers (Fig. 7B), and concerns the replication of RNA inside vesicles, operated by an enzyme (the Q-replicase) whose production was ultimately encoded in the RNA sequence itself (Kita et al., 2008). The aim of this study was the coupling between information-carrying molecules and the production of molecular machinery that replicate the information (RNA that codifies for an enzyme whose role is to replicate RNA). At this aim, a template (+)RNA strand was coencapsulated with the reconstituted transcription/translation kit. Its translation gives the functional enzyme Q-replicase, that in turn replicate the template (+)RNA into the complementary strand (-)RNA (and vice-versa). In a more complex design, the -galactosidase, encoded on the (-)RNA strand was also successfully expressed, and its function verified by the production of a fluorescent product from a fluorogenic substrate.
7. Potential applications of minimal semi-synthetic cells and other microcompartimentalized systems
It is true that at the current stage the SSMC research appears still at its infancy, but it is also possible to devise some potential applications. Perhaps, one of the most interesting one has been proposed by LeDuc et al. (2007) (see also Zhang et al., 2008). The authors have proposed a potential application of a cell-like construction as “nanofactory” (Fig. 8). Shortly, inspired by the current research on liposomes as vehicle for drug delivery of drugs, and on their targeting based on antibody-functionalization, a kind of minimal cell could be constructed from a lipid shell and internalized metabolic/genetic circuits. Thanks to the surface recognition by specific intermolecular interactions, the “nanofactory”, once injected in the body could find the target tissue and accumulate in the nearby. Once sit near the target tissue, thanks to membrane permeability an externally present chemical trigger might induce a cascade internal reaction that ultimately produce a toxic drug for the tissue, so that an
A second interesting aspect is related to potential sensing capability of SSMCs. The possible applications of lipid vesicles as membrane models for toxicological assessment of xenobiotics has been described (Zepik et al., 2008). By combining surface-bound receptors with internalized triggered response, SSMCs biosensors could be constructed for sensing
different kind of molecules. An interesting study on the use of lipid vesicles for sensing odorants has been reported (Takeuchi et al., 2011). Although the core mechanism was based on chemical transformation, it is possible to think to similarly working biomolecular networks. From the technical viewpoint, the technological ability to generate
In addition to long-term prospects for biotechnology, as the use of minimalized strains of bacteria-like objects for industrial applications, the construction of SSMCs also has a profound implication in basic science. First of all, it helps to demonstrated, if still needed, that a
In conclusion, the investigation on SSMCs is in a flourishing phase, and we are convinced that the development of this technology will be of great value for basic and applied science.
Acknowledgments
I greatly thank Pier Luigi Luisi for inspiring this research and for stimulating discussions. Funding/networking agencies: SYNTHCELLS project (Approaches to the Bioengineering of Synthetic Minimal Cells, EU-FP6 043359), HFSP (RGP0033/2007-C), ASI (I/015/07/0), PRIN2008 (2008FY7RJ4), SynBioNT, and COST Systems Chemistry action (CM0703).
References
- 1.
Bucher P. Fischer A. Luisi P. L. Oberholzer T. Walde P. 1998 Giant Vesicles as Biochemical Compartments: The Use of Microinjection Techniques.14 2712 2721 - 2.
Chang M. T. S. 1987 Recycling of NAD(P) by multienzyme systems immobilized by microencapsulation in artificial cells.136 67 82 - 3.
Chiarabelli C. Stano P. Luisi P. L. 2009 Chemical approaches to synthetic biology.20 492 497 - 4.
Choi H. J. Montemagno C. D. 2007 Light-driven hybrid bioreactor based on protein-incorporated polymer vesicles.6 171 176 - 5.
Christensen S. M. Stamou D. G. 2010 Sensing-Applications of Surface-Based Single Vesicle Arrays.10 11352 11368 - 6.
De Lorenzo V. Danchin A. 2008 Synthetic biology: Discovering new worlds and new words. 9, 9. - 7.
Delaittre G. Reynhout I. C. Cornelissen J. J. L. M. Nolte R. J. M. 2009 Cascade reactions in an all-enzyme nanoreactor.15 12600 12603 - 8.
Dominak L. M. Keating C. D. 2007 Polymer Encapsulation within Giant Lipid Vesicles.23 7148 7154 - 9.
Dong H. Nilsson L. Kurland C. G. 1996 Co-variation of tRNA abundance and codon usage in Escherichia coli at different growth rates.260 649 - 10.
Fehér T. Papp B. Pál C. Pósfai G. 2007 Systematic Genome Reductions: Theoretical and Experimental Approaches. 107, 3498−3513. - 11.
Fischer A. Franco T. Oberholzer T. 2002 Giant Vesicles as Microreactors for Enzymatic mRNA Synthesis.3 409 417 - 12.
Forster A. C. Church G. M. 2006 Towards synthesis of a minimal cell. 2, 45. - 13.
Fraser C. M. Gocayne J. D. White O. et al. 1995 The minimal gene complement of Mycoplasma genitalium.270 397 403 - 14.
Freisleben H. J. Zwicker K. Jezek P. John G. Bettin-Bogutzki A. Ring K. Nawroth T. 1995 Reconstitution of bacteriorhodopsin and ATP synthase from Micrococcus luteus into liposomes of the purified main tetraether lipid from Thermoplasma acidophilum : proton conductance and light-driven ATP synthesis.78 137 147 - 15.
Gardner P. M. Winzer K. Davis B. G. 2009 Sugar synthesis in a protocellular model leads to a cell signalling response in bacteria.1 377 383 - 16.
Gibson D. G. Glass J. I. Lartigue C. Noskov V. N. et al. 2010 Creation of a bacterial cell controlled by a chemically synthesized genome.329 52 56 - 17.
Gil R. Silva F. J. Peretó J. Moya A. 2004 Determination of the core of a minimal bacteria gene set.68 518 537 - 18.
Graff A. Winterhalter M. Meier W. 2001 Nanoreactors from polymer-stabilized liposomes.17 919 923 - 19.
Haran G. Cohen R. Bar L. K. Barenholz Y. 1993 Transmembrane ammonium sulfate gradients in liposomes produce efficient and stable entrapment of amphipathic weak bases. Biochim. Biophys. Acta1151 201 215 - 20.
Henry C. S. Overbeek R. Stevens R. L. 2010 Building the blueprint of life.5 695 704 - 21.
Hill K. J. Kaszuba M. Creeth J. E. Jones M. N. 1997 Reactive liposomes encapsulating a glucose oxidase-peroxidase system with antibacterial activity. a1326 37 46 - 22.
Hillebrecht J. R. Chong S. 2008 A comparative study of protein synthesis in in vitro systems: from the prokaryotic reconstituted to the eukaryotic extract-based. 8, 58. - 23.
Ishikawa K. Sato K. Shima Y. Urabe I. Yomo T. 2004 Expression of a cascading genetic network within liposomes.576 387 390 - 24.
Islas S. Becerra A. Luisi P. L. Lazcano A. 2004 Comparative genomics and the gene complement of a minimal cell.34 243 256 - 25.
Kaszuba M. Jones M. N. 1999 Hydrogen peroxide production from reactive liposomes encapsulating enzymes.1419 221 228 - 26.
Kim J. Winfree E. 2011 Synthetic in vitro transcriptional oscillators. 7, 465. - 27.
Kita H. Matsuura T. Sunami T. Hosoda K. Ichihashi N. Tsukada K. Urabe I. Yomo T. 2008 Replication of genetic information with self-encoded replicase in liposomes.9 2403 2410 - 28.
Knoll A. Osborn M. J. Baross J. Berg H. C. Pace N. R. Sogin M. (eds 1999 . National Academic Press, Washington. - 29.
Kuruma Y. Stano P. Ueda T. Luisi P. L. 2009 A synthetic biology approach to the construction of membrane proteins in semisynthetic minimal cells.1788 567 574 - 30.
Le Duc P. et al. 2007 Towards an in vivo biologically inspired nanofactory.2 3 7 - 31.
Lohse B. Bolinger P. Y. Stamou D. 2008 Encapsulation Efficiency Measured on Single Small Unilamellar Vesicles.130 14372 14373 - 32.
Luisi P. L. Allegretti M. Souza T. Steineger F. Fahr A. Stano P. 2010 Spontaneous protein crowding in liposomes: A new vista for the origin of cellular metabolism.11 1989 1992 - 33.
Luisi P. L. Ferri F. Stano P. 2006 Approaches to semi-synthetic minimal cells: a review.93 1 13 - 34.
Luisi P. L. Stano P. . Eds 2011 . Springer, Dordrecht. - 35.
Matosevic S. Paegel B. M. 2011 Stepwise Synthesis of Giant Unilamellar Vesicles on a Microfluidic Assembly Line133 2798 2800 - 36.
Morowitz H. J. 1992 . Metabolism Recapitulates Biogenesis. Yale University Press, New Haven. - 37.
Moya A. Gil R. Latorre A. Peretó J. Garcillán-Barcia M. P. de la Cruz F. 2009 Toward minimal bacterial cells: evolution vs. design.33 225 235 - 38.
Murtas G. Kuruma Y. Bianchini P. Diaspro A. Luisi P. L. 2007 Protein synthesis in liposomes with a minimal set of enzymes.363 12 17 - 39.
Mushegian A. R. Koonin E. V. 1996 A minimal gene set for cellular life derived by comparison of complete bacterial genomes.93 10268 10273 - 40.
New R. R. C. 1990 . IRL Press at Oxford University Press, Oxford. - 41.
Noireaux V. Libchaber A. 2004 A vesicle bioreactor as a step toward an artificial cell assembly.101 17669 17674 - 42.
Noireaux V. Bar-Ziv R. Libchaber A. 2003 Principles of cell-free genetic circuit assembly.100 12672 12677 - 43.
Oberholzer T. Albrizio M. Luisi P. L. 1995 Polymerase chain reaction in liposomes.2 677 682 - 44.
Oberholzer T. Meyer E. Amato I. Lustig A. Monnard P. A. 1999 Enzymatic reactions in liposomes using the detergent-induced liposome loading method.1416 57 68 - 45.
Oberholzer T. Nierhaus K. H. Luisi P. L. 1999 Protein expression in liposomes.261 238 241 - 46.
Ota S. Yoshizawa S. Takeuchi S. 2009 Microfluidic Formation of Monodisperse, Cell-Sized, and Unilamellar Vesicles.2009 48 6533 - 47.
Pautot S. Frisken B. J. Weitz D. A. 2003a Engineering asymmetric vesicles.100 10718 10721 - 48.
Pautot S. Frisken B. J. Weitz D. A. 2003b Production of Unilamellar Vesicles Using an Inverted Emulsion. 19, 2870 2879. - 49.
Pitard B. Richard P. Dunarach M. Girault G. Rigaiud J. L. 1996 ATP Synthesis by the F0F1 ATP synthase from Thermophilic bacillus PS3 reconstituted into liposomes with bacteriorhodopsin 1. Factors defining the optimal reconstitution of ATP synthases with bacteriorhodopsin.235 769 778 - 50.
Pontani L. L. van der Gucht J. Salbreux G. Heuvingh J. Joanny J. F. Sykes C. 2009 Reconstitution of an Actin Cortex Inside a Liposome. 96,192 198 - 51.
Saito H. Kato Y. La Berre M. Yamada A. Inoue T. Yoshikawa K. Baigl D. 2009 Time-Resolved Tracking of a Minimum Gene Expression System Reconstituted in Giant Liposomes.10 1640 1643 - 52.
Schmidli P. K. Schurtenberger P. Luisi P. L. 1991 Liposome mediated enzymatic synthesis of phosphatidylcholine as an approach to self-replicating liposomes.113 8127 8130 - 53.
Shimizu Y. Inoue A. Tomari Y. Suzuki T. Yokogawa T. Nishikawa K. Ueda T. 2001 Cell free translation reconstituted with purified components.19 751 755 - 54.
Shimizu Y. Kanamori T. Ueda T. 2005 Protein synthesis by pure translation systems.36 299 304 - 55.
Souza T. Stano P. Luisi P. L. 2009 The minimal size of liposome-based model cells brings about a remarkably enhanced biological activity.10 1056 1063 - 56.
Stano P. Luisi P. L. 2010a Achievements and open questions in the self-reproduction of vesicles and synthetic minimal cells.46 3639 3653 - 57.
Stano P. Luisi P. L. 2010b Reactions in Liposomes. In: “” U. H. Brinker & J.-L. Mieusset (eds.) Wiley.455 492 - 58.
Sugiura S. Kuroiwa T. Kagota T. Nakajima M. Sato S. Mukataka S. Walde P. Ichikawa S. 2008 Novel Method for Obtaining Homogeneous Giant Vesicles from a Monodisperse Water-in-Oil Emulsion Prepared with a Microfluidic Device.2008 24 4581 4588 - 59.
Sunami T. Sato K. Matsuura T. Tsukada K. Urabe I. Yomo T. 2006 Femtoliter compartment in liposomes for in vitro selection of proteins. Analytical Biochem.357 128 136 - 60.
Takeuchi T. Montenegro J. Hennig A. Matile S. 2011 Pattern generation with synthetic sensing systems in lipid bilayer membranes. 2,303 307 - 61.
Treyer M. Walde P. Oberholzer T. 2002 Permeability Enhancement of Lipid Vesicles to Nucleotides by Use of Sodium Cholate: Basic Studies and Application to an Enzyme-Catalyzed Reaction Occurring inside the Vesicles.18 1043 1050 - 62.
Tsumoto K. Nomura S. M. Nakatani Y. Yoshikawa K. 2001 Giant liposome as a biochemical reactor: transcription of DNA and transportation by laser tweezers.17 7225 7228 - 63.
Vamvakaki V. Fournier D. Chaniotakis N. A. 2005 Fluorescence detection of enzymatic activity within a liposome based nano-biosensor.21 384 388 - 64.
Van Dongen S. F. M. Nallani M. Cornelissen J. J. L. M. Nolte R. J. M. van Hest J. C. M. 2009 A three-enzyme cascade reaction through positional assembly of enzymes in a polymersome nanoreactor.15 1107 1114 - 65.
Varela F. Maturana H. Uribe R. 1974 Autopoiesis: the organization of living systems, its characterization and a model.5 187 195 - 66.
Walde P. Ichikawa S. 2001 Enzymes inside Lipid Vesicles: preparation, reactivity and Applications.18 143 177 - 67.
Walde P. Cosentino K. Hengel H. Stano P. 2010 Giant Vesicles: Preparations and Applications.11 848 865 - 68.
Wick R. Angelova M. Walde P. Luisi P. L. 1996 Microinjection into giant vesicles and light microscopy investigation of enzyme-mediated vesicle transformations.3 105 111 - 69.
Yamada A. Yamanaka T. Hamada T. Hase M. Yoshikawa K. Baigl D. 2006 Spontaneous Transfer of Phospholipid-Coated Oil-in-Oil and Water-in-Oil Micro-Droplets through an Oil/Water Interface. 22, 9824 9828. - 70.
Yoshimoto M. Wang S. Fukunaga K. Fournier D. Walde P. Kuboi R. Nakao K. 2005 Novel immobilized liposomal glucose oxidase system using the channel protein OmpF and catalase.90 231 238 - 71.
Yu W. Sato K. Wakabayashi M. Nakatshi T. Ko-Mitamura E. P. Shima Y. Urabe I. Yomo T. 2001 Synthesis of functional protein in liposome.92 590 593 - 72.
Zepik H. H. Bloechliger E. Luisi P. L. 2001 A Chemical Model of Homeostasis.40 199 202 - 73.
Zepik H. H. Walde P. Kostoryz E. L. Code J. Yourtee D. M. 2008 Lipid vesicles as membrane models for toxicological assessment of xenobiotics.38 1 11 - 74.
Zhang Y. Ruder W. C. Le Duc P. 2008 Artificial cells: building bioinspired systems using small-scale biology.26 14 20