Open access peer-reviewed Edited volume

Heat Exchangers

Basics Design Applications

Selecting and bringing together matter provided by specialists, this project offers comprehensive information on particular cases of heat exchangers. The selection was guided by actual and future demands of applied research and industry, mainly focusing on the efficient use and conversion energy in changing environment. Beside the questions of thermodynamic basics, the book addresses several important issues, such as conceptions, design, operations, fouling and cleaning of heat exchangers. It includes also storage of thermal energy and geothermal energy use, directly or by application of heat pumps. The contributions are thematically grouped in sections and the content of each section is introduced by summarising the main objectives of the encompassed chapters. The book is not necessarily intended to be an elementary source of the knowledge in the area it covers, but rather a mentor while pursuing detailed solutions of specific technical problems which face engineers and technicians engaged in research and development in the fields of heat transfer and heat exchangers.

Read more >Order hardcopy
IntechOpen
Heat ExchangersBasics Design ApplicationsEdited by Jovan Mitrovic

Published: March 9th 2012

DOI: 10.5772/1997

ISBN: 978-953-51-0278-6

Copyright year: 2012

Books open for chapter submissions

133755 Total Chapter Downloads

5 Crossref Citations

29 Web of Science Citations

33 Dimensions Citations

chaptersDownloads

Open access peer-reviewed

1. Thermodynamic Optimization

By M.M. Awad and Y.S. Muzychka

4931

Open access peer-reviewed

2. Analytical Solution of Dynamic Response of Heat Exchanger

By D. Gvozdenac

4939

Open access peer-reviewed

3. Self-Heat Recuperation: Theory and Applications

By Yasuki Kansha, Akira Kishimoto, Muhammad Aziz and Atsushi Tsutsumi

3068

Open access peer-reviewed

4. Development of High Efficiency Two-Phase Thermosyphons for Heat Recovery

By Ignacio Carvajal-Mariscal, Florencio Sanchez-Silva and Georgiy Polupan

3607

Open access peer-reviewed

5. Impact of a Medium Flow Maldistribution on a Cross-Flow Heat Exchanger Performance

By Tomasz Bury

2911

Open access peer-reviewed

6. Control of LNG Pyrolysis and Application to Regenerative Cooling Rocket Engine

By R. Minato, K. Higashino, M. Sugioka and Y. Sasayama

3216

Open access peer-reviewed

7. Numerical Analysis of the Structural Stability of Heat Exchangers – The FEM Approach

By Agnieszka A. Chudzik

2375

Open access peer-reviewed

8. Microchannel Simulation

By Mohammad Hassan Saidi, Omid Asgari and Hadis Hemati

2265

Open access peer-reviewed

9. Compact Heat Exchange Reformer Used for High Temperature Fuel Cell Systems

By Huisheng Zhang, Shilie Weng and Ming Su

3712

Open access peer-reviewed

10. Single-Phase Heat Transfer and Fluid Flow Phenomena of Microchannel Heat Exchangers

By Thanhtrung Dang, Jyh-tong Teng, Jiann-cherng Chu, Tingting Xu, Suyi Huang, Shiping Jin and Jieqing Zheng

3580

Open access peer-reviewed

11. Heat Exchangers for Thermoelectric Devices

By David Astrain and Álvaro Martínez

6342

Open access peer-reviewed

12. Helically Coiled Heat Exchangers

By J. S. Jayakumar

11140

Open access peer-reviewed

13. Fin-Tube Heat Exchanger Optimization

By Piotr Wais

18005

Open access peer-reviewed

14. Thermal Design of Cooling and Dehumidifying Coils

By M. Khamis Mansour and M. Hassab

35073

Open access peer-reviewed

15. The Characteristics of Brazed Plate Heat Exchangers with Different Chevron Angles

By M. Subbiah

5952

Open access peer-reviewed

16. PCM-Air Heat Exchangers: Slab Geometry

By Pablo Dolado, Ana Lázaro, José María Marín and Belén Zalba

3851

Open access peer-reviewed

17. Ground-Source Heat Pumps and Energy Saving

By Mohamad Kharseh

2738

Open access peer-reviewed

18. The Soultz-sous-Forêts’ Enhanced Geothermal System: A Granitic Basement Used as a Heat Exchanger to Produce Electricity

By Béatrice A. Ledésert and Ronan L. Hébert

2948

Open access peer-reviewed

19. Fouling and Fouling Mitigation on Heat Exchanger Surfaces

By S. N. Kazi

5762

Open access peer-reviewed

20. Fouling in Plate Heat Exchangers: Some Practical Experience

By Ali Bani Kananeh and Julian Peschel

4049

Open access peer-reviewed

21. Self-Cleaning Fluidised Bed Heat Exchangers for Severely Fouling Liquids and Their Impact on Process Design

By Dick G. Klaren and Eric F. Boer de

3291

Edited volume and chapters are indexed in

  • Worldcat
  • OpenAIRE
  • Google Scholar
  • AZ ebsco
  • Base
  • CNKI
  • IET Inspec

Order a hardcopy of the Edited volume

Free shipping with DHL Express

Hardcover (ex. VAT)£205

Order now

Residents of European Union countries need to add a Book Value-Added Tax of 5%. Institutions and companies, registered as VAT taxable entities in their own EU member state, will not pay VAT by providing IntechOpen with their VAT registration number. This is made possible by the EU reverse charge method.

Special discount for IntechOpen contributors

All IntechOpen contributors are offered special discounts starting at 40% OFF available through your personal dashboard

Login and purchase