Open access peer-reviewed Edited Volume

Computational Fluid Dynamics Simulations

Edited by Guozhao Ji

Dalian University of Technology

Co-editor:

Jiujiang Zhu

University of Wuyi

Fluid flows are encountered in our daily life as well as in engineering industries. Identifying the temporal and spatial distribution of fluid dynamic properties is essential in analyzing the processes related to flows. These properties, such as velocity, turbulence, temperature, pressure, and concentration, play important roles in mass transfer, heat transfer, reaction rate, and force analysis. However, obtaining the analytical solution of these fluid property distributions is technically difficult or impossible. With the technique of finite difference methods or finite element methods, attaining numerical solutions from the partial differential equations of mass, momentum, and energy have become achievable. Therefore, computational fluid dynamics (CFD) has emerged and been widely applied in various fields. This book collects the recent studies that have applied the CFD technique in analyzing several representative processes covering mechanical engineering, chemical engineering, environmental engineering, and thermal engineering.

Read more >Order hardcopy
IntechOpen
Computational Fluid Dynamics SimulationsEdited by Guozhao Ji

Published: September 9th 2020

DOI: 10.5772/intechopen.83278

ISBN: 978-1-83880-750-4

Print ISBN: 978-1-83880-749-8

eBook (PDF) ISBN: 978-1-83880-751-1

Copyright year: 2020

Books open for chapter submissions

1636 Total Chapter Downloads

1 Crossref Citations

2 Dimensions Citations

chaptersDownloads

Open access peer-reviewed

1. Calibration Methodology for CFD Models of Rooms and Buildings with Mechanical Ventilation from Experimental Results

By Alejandro Rincón Casado, Magdalena Hajdukiewicz, F. Sánchez de la Flor and Enrique Rodríguez Jara

94

Open access peer-reviewed

2. Scaling Investigation of Low Prandtl Number Flow and Double Diffusive Heat and Mass Transfer over Inclined Walls

By Mubashir O. Quadri, Matthew N. Ottah, Olayinka Omowunmi Adewumi and Ayowole A. Oyediran

59

Open access peer-reviewed

3. Bingham Fluid Simulation in Porous Media with Lattice Boltzmann Method

By José Luis Velázquez Ortega

196

Open access peer-reviewed

4. Interface Treatment for Conjugate Conditions in the Lattice Boltzmann Method for the Convection Diffusion Equation

By David Korba and Like Li

277

Open access peer-reviewed

5. Hydrodynamic Analysis on a Photocatalytic Reactor Using ANSYS Fluent®

By Adolfo Ruiz-Soto, Diana Barraza-Jiménez, Abel Hurtado-Macias, Sandra Iliana Torres-Herrera, Carlos Omar Ríos-Orozco, Miriam López-Guzmán, Elva Marcela Coria-Quiñones, Raúl Armando Olvera-Corral and Manuel Alberto Flores-Hidalgo

117

Open access peer-reviewed

6. Computational Fluid Dynamics of Mixing Performance in Microchannel

By Siti Nor Azreen Ahmad Termizi and Syamsul Rizal Abd Shukor

73

Open access peer-reviewed

7. Numerical Modeling of Nanotechnology-Boosted Chemical Enhanced Oil Recovery Methods

By Pablo D. Druetta

128

Open access peer-reviewed

8. Development of the Flight Dynamic Model (FDM) Using Computational Fluid Dynamic (CFD) Simulations for an Unknown Aircraft

By Adil Loya, Shoaib Arif, Muhammad Arsalan, Siraj Anis, Arsalan Khan, Muhammad Saad Saeed and Abdul Hameed Siddiqui

76

Open access peer-reviewed

9. Computational Fluid Dynamic Simulation of Vertical Axis Hydrokinetic Turbines

By Edwin Lenin Chica Arrieta and Ainhoa Rubio Clemente

256

Open access peer-reviewed

10. The Multiphase Flow CFD Analysis in Journal Bearings Considering Surface Tension and Oil-Filler Port Flow

By Masayuki Ochiai, Fuma Sakai and Hiromu Hashimoto

82

Open access peer-reviewed

11. CFD Application for Gas Turbine Combustion Simulations

By Valeriu Vilag, Jeni Vilag, Razvan Carlanescu, Andreea Mangra and Florin Florean

287

Edited Volume and chapters are indexed in

  • Worldcat
  • OpenAIRE
  • Google Scholar
  • AZ ebsco
  • Base
  • CNKI

Order a hardcopy of the Edited Volume

Free shipping with DHL Express

Hardcover (ex. VAT)£140

Order now

Residents of European Union countries need to add a Book Value-Added Tax of 5%. Institutions and companies, registered as VAT taxable entities in their own EU member state, will not pay VAT by providing IntechOpen with their VAT registration number. This is made possible by the EU reverse charge method.

Special discount for IntechOpen contributors

All IntechOpen contributors are offered special discounts starting at 40% OFF available through your personal dashboard

Login and purchase