Open access peer-reviewed Edited volume

Computational Fluid Dynamics

Basic Instruments and Applications in Science

Edited by Adela Ionescu

University of Craiova, Romania

This book is the result of a careful selection of contributors in the field of CFD. It is divided into three sections according to the purpose and approaches used in the development of the contributions. The first section describes the "high-performance computing" (HPC) tools and their impact on CFD modeling. The second section is dedicated to "CFD models for local and large-scale industrial phenomena." Two types of approaches are basically contained here: one concerns the adaptation from global to local scale, - e.g., the applications of CFD to study the climate changes and the adaptations to local scale. The second approach, very challenging, is the multiscale analysis. The third section is devoted to "CFD in numerical modeling approach for experimental cases." Its chapters emphasize on the numerical approach of the mathematical models associated to few experimental (industrial) cases. Here, the impact and the importance of the mathematical modeling in CFD are focused on. It is expected that the collection of these chapters will enrich the state of the art in the CFD domain and its applications in a lot of fields. This collection proves that CFD is a highly interdisciplinary research area, which lies at the interface of physics, engineering, applied mathematics, and computer science.

Read more >Order hardcopy
IntechOpen
Computational Fluid DynamicsBasic Instruments and Applications in ScienceEdited by Adela Ionescu

Published: February 14th 2018

DOI: 10.5772/intechopen.68688

ISBN: 978-953-51-3791-7

Print ISBN: 978-953-51-3790-0

Books open for chapter submissions

2419 Total Chapter Downloads

4 Dimensions Citations

chaptersDownloads

Open access peer-reviewed

1. High-Performance Computing: Dos and Don’ts

By Guillaume Houzeaux, Ricard Borrell, Yvan Fournier, Marta Garcia- Gasulla, Jens Henrik Göbbert, Elie Hachem, Vishal Mehta, Youssef Mesri, Herbert Owen and Mariano Vázquez

275

Open access peer-reviewed

2. Multilevel Variable-Block Schur-Complement-Based Preconditioning for the Implicit Solution of the Reynolds- Averaged Navier-Stokes Equations Using Unstructured Grids

By Bruno Carpentieri and Aldo Bonfiglioli

126

Open access peer-reviewed

3. Free-Surface Flow Simulations with Smoothed Particle Hydrodynamics Method using High-Performance Computing

By Corrado Altomare, Giacomo Viccione, Bonaventura Tagliafierro, Vittorio Bovolin, José Manuel Domínguez and Alejandro Jacobo Cabrera Crespo

170

Open access peer-reviewed

4. Highly Deforming Computational Meshes for CFD Analysis of Twin-Screw Positive Displacement Machines

By Sham Rane, Ahmed Kovačević, Nikola Stošić and Ian Smith

129

Open access peer-reviewed

5. Optimization Design by Coupling Computational Fluid Dynamics and Genetic Algorithm

By Jong-Taek Oh and Nguyen Ba Chien

128

Open access peer-reviewed

6. Applications of CFD for Process Safety

By Luis G. Zárate, Sebastián Uribe and Mario E. Cordero

167

Open access peer-reviewed

7. Adaptation to Climate Change at Local Scale: A CFD Study in Porto Urban Area

By Vera Rodrigues, Sandra Rafael, Sandra Sorte, Sílvia Coelho, Hélder Relvas, Bruno Vicente, Joana Leitão, Myriam Lopes, Ana Isabel Miranda and Carlos Borrego

146

Open access peer-reviewed

8. Computational Fluid Dynamics (CFD) Applied to a Glass Vaporization Chamber for Introduction of Micro- or Nano-Size Samples into Lab-Based ICPs and to a CFD-Derived (and Rapidly Prototyped Via 3D Printing) Smaller-Size Chamber for Portable Microplasmas

By Hamid R. Badiei, Gordon Stubley, Ryan Fitzgerald, Melanie Saddler and Vassili Karanassios

138

Open access peer-reviewed

9. Analysis of Biomass Waste Cofiring into Existing Coal-Fired Power Plant Using Computational Fluid Dynamics

By Arif Darmawan, Dwika Budianto, Koji Tokimatsu and Muhammad Aziz

157

Open access peer-reviewed

10. CFD Modelling of Coupled Multiphysics-Multiscale Engineering Cases

By Mario E. Cordero, Sebastián Uribe, Luis G. Zárate, Reyna Natividad Rangel, Alejandro Regalado-Méndez and Ever Peralta Reyes

195

Open access peer-reviewed

11. CFD Analysis of Turbulence Models to Achieve the Digester Mixing Process

By Jorge Flores-Velazquez, Abraham Jesus Arzeta-Rios, Waldo Ojeda Bustamante and Teodoro Espinosa-Solares

153

Open access peer-reviewed

12. CFD for the Design and Optimization of Slurry Bubble Column Reactors

By Omar M. Basha and Badie I. Morsi

160

Open access peer-reviewed

13. Two Different Formulations for Solving the Navier-Stokes Equations with Moderate and High Reynolds Numbers

By Blanca Bermúdez, Alejandro Rangel-Huerta, Wuiyevaldo Fermín Guerrero-Sánchez and José David Alanís

100

Open access peer-reviewed

14. Vibration Characteristics of Fluid-Filled Functionally Graded Cylindrical Material with Ring Supports

By Muzamal Hussain, Aamir Shahzad, Muhammad Nawaz Naeem and Maogang He

121

Open access peer-reviewed

15. CFD Simulations of Crude Oil Fouling on Heat Transfer Surfaces

By Ramasamy Marappa Gounder and Sampath Emani

149

Open access peer-reviewed

16. Surrogate Model Applied for Analysis of Uncertain Parameters in Turbulent Mixing Flows

By Boštjan Končar, Andrej Prošek and Matjaž Leskovar

105

Edited volume and chapters are indexed in

  • Worldcat
  • OpenAIRE
  • Google Scholar
  • AZ ebsco
  • Base
  • CNKI
  • IET Inspec

Order a hardcopy of the Edited volume

Free shipping with DHL Express

Hardcover (ex. VAT)£170

Order now

Residents of European Union countries need to add a Book Value-Added Tax of 5%. Institutions and companies, registered as VAT taxable entities in their own EU member state, will not pay VAT by providing IntechOpen with their VAT registration number. This is made possible by the EU reverse charge method.

Special discount for IntechOpen contributors

All IntechOpen contributors are offered special discounts starting at 40% OFF available through your personal dashboard

Login and purchase

Related books