Open access peer-reviewed chapter

Recent Highlights in Green Oxidative Chemical Processes Applied to Steroid Chemistry

Written By

Samuel M. Silvestre, M. Manuel C. Silva and Jorge A. R. Salvador

Submitted: 27 October 2015 Reviewed: 03 February 2016 Published: 01 June 2016

DOI: 10.5772/62381

From the Edited Volume

Green Nanotechnology - Overview and Further Prospects

Edited by Marcelo L. Larramendy and Sonia Soloneski

Chapter metrics overview

2,625 Chapter Downloads

View Full Metrics

Abstract

Steroids and their oxidation products are widely distributed in living organisms and are important intermediates for the synthesis of many biologically active molecules. Due to their pharmacological and synthetic relevance, several oxidative chemical processes for the functionalization of the steroid nucleus have been developed. Green chemistry principles have been incorporated in some oxidative transformations of steroids, allowing significant advances in synthetic chemistry applied to these compounds. This chapter presents a selection of relevant applications of pharmaceutical green chemistry to steroid’s oxidative processes. Special emphasis is given to catalytic processes encompassing heterogeneous nanocatalysts, whose application in this context is increasing over the past years. This chapter is organized according to the reaction type that includes alcohol oxidation, epoxidation of alkenes, and allylic oxidation of alkenes to enones, among other relevant oxidative transformations. Biocatalytic oxidative methods applied to steroid synthesis are not included in this review.

Keywords

  • green pharmaceutical chemistry
  • steroids
  • catalysis
  • oxidation
  • green technologies
  • nanocatalysts

1. Introduction

1.1. Basic steroid chemistry and relevance of oxygenated steroids

Steroid compounds are found in almost all living organisms [1, 2], having an important role in their vital activity [14]. The steroid hormones were discovered and characterized during the 1930s, and since then, it has been realized that steroid compounds can control important physiopathological conditions, being therefore important starting point for the development of new medicines [3]. Indeed, several natural and synthetic steroids are important therapeutic options for a wide range of diseases. These include sex and corticosteroid hormones, bile acids, vitamin D derivatives, and cardiotonic steroids, among others, that have shown unique therapeutic value for a broad array of medical conditions [1]. Due to their relevance, over the last decades, hundreds of steroid compounds have been isolated from natural sources, whereas many thousands of them have been obtained synthetically [2, 4] and their study has continued until present days in both chemical and biological perspectives.The steroidal basic structure constitutes a common chemical skeleton of four fused rings, consisting of three six-membered rings and a five-membered ring [1, 2, 5]. This hydrocarbon scaffold contains 17 carbons and has the cyclopentaneperhydrophenanthrene basic structure. The four steroid rings are labeled as A, B, C and D and their carbon atoms are numbered according to the universal convention according to the IUPAC-IUB (International Union of Pure and Applied Chemistry/International Union of Biochemistry) Joint Commission on Biochemical Nomenclature [6]. Angular methyl groups at C13 and C10 are designated as 18-CH3 and 19-CH3, respectively, and alkyl substituents at C17 are the steroid side-chain. The 18- and 19-methyl groups stand above the plane of the steroid skeleton and, by convention, have β-configuration. Therefore, as stated, other atoms or substituents located above this plane also have β-configuration, while those below it have α-configuration (Figure 1) [1, 2, 5, 6].

Figure 1.

Chemical structure of the 5α-cholestane nucleus.

The preparation of steroids containing oxygenated functions in the steroid nucleus is of high relevance and can be performed by means of several oxidative processes. Among the large variety of available methods, the allylic oxidation and epoxidation of alkenes and the alcohol oxidation are probably the most commonly used oxidative transformations [1, 2]. In fact, the allylic oxidation of steroidal alkenes to the corresponding enones, such as Δ5-7-ketones, is of great importance because of their significant biological properties. The diastereoselective epoxidation of steroidal alkenes is a relevant challenge because of the difficulty in the preparation of pure epoxides. This transformation is also very important not only because the epoxide moiety is of high synthetic interest for further elaboration but also because this functionality has been found in several biologically active steroids. The oxidation of steroidal alcohols is also considered in this chapter. A relevant example of high industrial interest is the transformation of Δ5-3β-hydroxylated steroids into the corresponding Δ4-3-ketones, a typical functionality of the major class of steroidal hormones [1, 2].

1.2. The green chemistry concept and green nanotechnologies

According to the Environmental Protection Agency, green or sustainable chemistry has been defined as “the design of chemical products and processes that reduce or eliminate the use or generation of hazardous substances” [7]. In fact, over the years, a large development in this field was observed and several new greener procedures are now being used in the chemical industry [8]. In the pharmaceutical industry, due to the complexity of the products involved as well as the characteristics/issues associated with their uses, the application of the green chemistry principles in the production of medicines has been an enormous challenge [8, 9]. Considering that the major sources of waste in the chemical/pharmaceutical industry are the use of stoichiometric reagents and solvent losses, and the clear solution to this problem is the development of catalytic reactions in alternative reaction media. Additionally, the possibility of recovery and reuse of the reactants/catalysts/solvents and the use of inexpensive, renewable and non-toxic materials are key issues in this context. Accordingly, over the years several greener approaches for the majority of chemical reactions have been developed [1012].

The development of catalytic processes has been the most explored strategy in green and sustainable chemistry, avoiding the use of numerous hazardous and/or expensive stoichiometric reactants. According to their nature, catalysts can be classified as metallic, organometallic, organocatalysts and biocatalysts. On the other hand, based on their physical state, catalysts can be grouped as homogeneous and heterogeneous [1013]. In this context, the use of heterogeneous catalysts (either metallic or non-metallic) has the important advantage of allowing their recovery and reuse [14, 15]. Furthermore, of major relevance in the pharmaceutical industry is the synthesis of organic compounds devoid of metal contamination, which can be achieved by using organo- [16, 17] and biocatalytic [18] procedures. Biocatalysis also has several advantages in the context of green chemistry, including the fact that reactions are frequently performed under mild conditions of temperature, pressure and pH and using water as solvent. Moreover, the catalyst is biodegradable and derived from renewable raw materials. Noteworthy, biocatalysis frequently leads to higher chemo-, regio- and stereoselectivities, than traditional chemical processes [10].

A special advance in green chemistry is the use of nanotechnologies. According to McKenzie and Hutchison, “Green nanoscience/nanotechnology involves the application of green chemistry principles to the design of nanoscale products, the development of nanomaterial production methods, and the application of nanomaterials” [19]. In organic chemical synthesis, the main application of this concept is the use of nanomaterials as nanocatalysts, being considered sustainable alternatives to conventional materials. In fact, the nanosized particles can offer some of the advantages of homogeneous catalysts because of an increased exposed surface area of the active component of the catalyst, which enhances dramatically the contact between reactants and catalyst. In addition, similarly to heterogeneous catalysts, their insolubility in the reaction solvents renders them easily separable from the reaction mixture, which consequently makes the product isolation stage effortless. Moreover, the activity and selectivity of nanocatalysts can be manipulated by tailoring chemical and physical properties such as size, shape, composition and morphology [20]. Due to these interesting properties, the use of nanocatalysts has been increasing over the years [21].

Solvent selection is another important issue in the development of new synthetic processes, in the chemical and pharmaceutical industries [8, 22]. Actually, the highest part of the material usage for active pharmaceutical ingredient (API) manufacture is usually constituted by solvents. In fact, it was estimated that their use consumes more than 50% of the overall energy and accounts for half of the post-treatment green-house gas emissions. Ideally, reactions should be performed without any solvent (neat conditions). However, solvents are critical for the reaction rates and selectivities and are often required for heat and mass transfer. Consequently, solvents should be readily available, non-volatile, non-flammable, non-toxic, recyclable and cheap [8, 10, 22]. Attractive solvents from both economical and environmental point of view can include water [23, 24], ionic liquids [25, 26], fluorous solvents [27] as well as supercritical fluids (e.g., supercritical CO2) [28, 29].

Green chemistry also deals with the minimization of energy usage. In fact, the addition of energy, mostly thermal, is necessary for the majority of organic reactions. For this reason, the strategy to develop chemical transformations under mild reaction conditions has been exploring alternative energy sources such as microwaves (MW), ultrasounds and even light [11, 12, 30]. In fact, successful advances have been made over the years mainly on MW-promoted reactions [30, 31] but also on sonochemistry [30, 32] and photochemistry [33].

1.3. Scope and organization of this chapter

Due to the above referred biological and synthetic importance of steroids, several new green chemical processes for the preparation and/or functionalization of the steroid nucleus have also been developed over the years [34, 35]. In this chapter, relevant applications of green oxidative chemical processes in steroid chemistry are described. Special emphasis is given to catalytic processes involving the use of heterogeneous catalysts, including nanocatalysts. Other green approaches, such as MW technologies as well as the use of ionic liquids as solvents, are presented. This chapter is organized according to the reaction type that includes alcohol oxidation, epoxidation, allylic oxidation and miscellaneous oxidative transformations.

Advertisement

2. Alcohol oxidation

The most common oxidative transformation in steroid chemistry is probably the oxidation of alcohols [34, 35]. Actually, not only several important natural and synthetic steroids have carbonyl groups but also this oxidation is frequently used as an intermediary step in the preparation of a large variety of bioactive steroids. For this reason, several oxidative processes for this reaction have been developed over the years. The most employed oxidants are transition metals, particularly chromium(VI) reagents. Nonetheless, other oxygen- and halogen-based oxidants as well as other oxidizing conditions, frequently combined with suitable catalysts, have been described [34, 35].

As a relevant example, a heterogeneous catalyst described for the successful oxidation of 5α-cholestan-3β-ol to 5α-cholestanone (Scheme 1) was chromium exchanged zeolite (CrE-ZSM-5) combined with 70% aqueous tert-butyl hydroperoxide (TBHP), an oxygen-based oxidant. However, it was shown that the reaction was, at least partially, homogeneously catalyzed by leached chromium [36]. Recently, metal-monocatecholate species were immobilized in a Zr(IV)-based metal-organic framework (MOF) to create new efficient heterogeneous catalysts. Within these, Cr-metalated MOFs revealed to be useful in the oxidation of a wide range of alcohols to ketones with TBHP (80% TBHP in di-t-butyl peroxide/water 3:2 solution). Catalysis could be achieved with very low metal loadings (0.5−1 mol %), and these MOF-based catalysts were completely recyclable and reusable [37]. In spite of the fact that 5α-cholestan-3β-ol is too large to diffuse into the pore cage of this catalyst, this steroidal alcohol was also efficiently oxidized with this system and probably the catalysis occurred on the surface of the particles. The oxidation of several alcohols, including cholesterol (Scheme 1), was also reported in aqueous conditions using the same oxidant and vanadyl sulfate as catalyst. Noteworthy, after completion of the oxidation and isolation of the product by extraction, the catalyst was recovered in the aqueous layer and reused in a new reaction by simply adding CH3CN, substrate and TBHP [38]. The immobilization of a RuCl3 complex in an aluminum metal-organic framework (MOF), MOF-253, by post-synthetic modification, afforded an heterogeneous catalyst (MOF-253-Ru) that was used in the oxidation of primary and secondary alcohols with PhI(OAc)2 as the oxidant, under very mild reaction conditions. When applied to 5α-cholestan-3β-ol (Scheme 1), a fast and high-yielding reaction was observed and after 4 hours of reaction, the corresponding ketone was obtained in 89% yield. Interestingly, due to the structure of the catalyst, it seems that its pore size is large enough to accommodate this complex substrate. Moreover, the MOF-253-Ru could be successively recycled up to six times without significant loss of activity [39].

Scheme 1.

Oxidation of 5α-cholestan-3β-ol and cholesterol to the corresponding 3-ketone derivatives.

Of high interest in the context of green chemistry is the use of molecular oxygen combined with recoverable and reusable heterogeneous catalysts in the transformation of alcohols to carbonyl compounds. An important example is the use of the heterogeneous Pd catalyst consisting on the palladium(II) acetate-pyridine complex supported on hydrocalcite in the aerobic oxidation of 5α-cholestan-3β-ol (Scheme 1) by air at atmospheric pressure as the sole oxidant under mild conditions. This catalyst was easily prepared using only commercially available reagents and could be reused several times [40]. Later, diverse nanocatalyts were reported to be effective in this transformation under aerobic conditions. These include gold nanoparticles immobilized in aluminum oxyhydroxide [41] or supported in hydrotalcite [42], and palladium nanoparticles entrapped in aluminum hydroxide [43]. Other steroidal alcohols including 3α-hydroxy-5α-pregnan-20-one and nandrolone were oxidized under aerobic conditions catalyzed by in situ generated Pd nanoparticles from Pd(O2CCF3)2 and neocuproine. Interestingly, this reaction was performed in aqueous solvent [44]. The use of fluorinated solvents is another relevant strategy in this context not only because they can be recovered and reused, but also because of the fact that the solubilization of oxygen is favored in fluorinated solvents. A relevant example was the aerobic oxidation of 5α-cholestan-3β-ol to 5α-cholestanone by molecular oxygen (Scheme 1) in a fluorinated biphasic system composed by perfluorodecalin and toluene, under catalysis by palladium(II) acetate combined with a perfluoroalkylated-pyridine ligand [pyridine-3-carbaldehyde bis(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl) acetal]. Of high interest is the fact that the fluorinated phase containing the active palladium species was easily separated and reused several times without significant loss of catalytic activity [45].

The use of a readily available organic compound as hydrogen acceptor can provide an interesting alternative to aerobic conditions namely by overcoming safety concerns linked to the use of flammable solvents. A relevant example of this strategy is the use of styrene as hydrogen acceptor in the oxidation of steroidal alcohols such as 3β-hydroxy-5α-androstan-17-one catalyzed by a low loading supported copper catalyst (Cu/Al2O3) [46]. More recently, Mitsudome et al. described the successful oxidation of 5α-cholestan-3β-ol to 5α-cholestanone promoted by two different nanocatalysts (Scheme 1). These included hydrotalcite-supported copper nanoparticles [47] and hydrotalcite-supported silver nanoparticles [48], which were used in combination with mesitylene or p-xylene as hydrogen acceptor, respectively.

Several ionic liquids can be used as compatible supports for or catalyst/reagent immobilization with the advantage of allowing its recovery and recycling. In this context, an organosulfoxide anchored on imidazolium ionic liquid scaffold was used in the oxidation of 5α-cholestan-3β-ol to 5α-cholestanone (Scheme 1) in 85% yield, under Swern oxidation conditions. This ionic liquid-supported reagent has the advantages of being non-volatile and odorless but also recoverable and reusable after reoxidation of the sulfide with periodic acid [49]. The oxidation of several alcohols including 5α-cholestan-3β-ol using ion-supported methyl sulfoxides and methyl sulfides through Swern and Corey-Kim reaction conditions, respectively, was also reported. Again, unpleasant odor was not detected in both procedures, and good yields and high purity of the products were achieved after straightforward work-ups. Moreover, the reactants could also be recovered and reused [50]. A similar strategy involved the use of ion-supported (diacetoxyiodo)benzenes (IS-DIB) in the presence of a catalytic amount of 2,2,6,6-tetramethylpiperidine-1-oxy radical (TEMPO) to efficiently transform a large variety of alcohols including 5α-cholestan-3β-ol (Scheme 1) under mild conditions. Ion-supported iodobenzenes, the co-products derived from IS-DIB in this oxidation, were recovered in good yields by a simple extraction and were then re-oxidized with sodium peroxoborate, for reuse in the same transformation [51].

The preparation of oxandrolone intermediates required the oxidation of 17α-methylandrostan-3β,17β-diol, which was accomplished by means of several mild, efficient and eco-friendly oxidizing conditions involving the use of NaOCl or H2O2/catalytic Na2WO4 under phase transfer conditions [52]. The oxidation of this substrate was also studied using the environmentally benign ionic liquid [bmim][Br] and mild and inexpensive reagent 2-iodoxybenzoic acid (IBX). Interestingly, it was observed that the relative amount of oxidant determined the products obtained. In effect, using 1.2 eq. of IBX, mestanolone was the only product, however, with 2.4 eq., a 1,2-dehydrogenation occurred along with the oxidation to the carbonyl functionality, affording 17β-hydroxy-17α-methyl-Δ1-androsten-3-one as the major product in a one-pot reaction. Moreover, by simply concentrating the filtrate under reduced pressure, the ionic liquid was recovered and effectively reused up to three times [53].

In addition to the previously described use of fluorinated solvents and ionic liquids, subcritical water may also be useful to replace environmentally unacceptable solvents in numerous organic reactions, including in oxidations of alcohols. This fact results from a dramatic decrease in solvent viscosity and an increase in substrate solubility observed with its use. Similarly to the observed with fluorinated solvents, molecular oxygen has a relevant solubility in subcritical water. In this context, Ozen and Kus reported a metal-free procedure using this solvent in several oxidations, including in the transformation of alcohols to carbonyl compounds. Under these conditions, cholesterol originated cholest-5-en-3-one (Scheme 1) in high yields [54].

The use of MW technology for the oxidation of alcohols to the corresponding carbonyl functions was also reported. Among other relevant substrates, diosgenin and cholesterol (Scheme 1) were oxidized to their Δ5-3-ketone derivatives in high isolated yields and after 2 minutes of reaction with pyridinium chlorochromate (PCC) and under MW irradiation [55].

Advertisement

3. Epoxidation

Epoxysteroids, namely several withanolides and oxysterols, exhibit diverse biological activities [34, 35, 56, 57]. In addition, the epoxide functional group has high synthetic interest because the facile ring opening allows the stereoselective introduction of various functionalities into the steroidal nucleus.

Classically, the preparation of epoxysteroids involves the use of peroxacids, such as meta-chloroperoxybenzoic acid (MCPBA), usually originating α-epoxides [58]. The stoichiometric combination of KMnO4 and metal salts, on the other hand, allows the successful selective synthesis of β-epoxides. Steroidal epoxides can also be prepared using other oxidative procedures involving, for example, the use of isolated or in situ generated dioxiranes, aziridines and peroxides, frequently combined with adequate promoters. More recently, due to their greener nature, several catalytic epoxidations have been reported as well as various procedures using more environmental friendly oxidants in combination with metal and non-metal catalysts [34, 35]. For example, new iron- and manganese-based catalysts were recently reported to efficiently epoxidize several unsaturated steroids in combination with H2O2 [5962]. In addition, the possibility of the recovery and reuse of the catalysts as well as the use of alternative solvents were also considered greener approaches to perform this transformation [34, 35].

Stereoselective syntheses of several β-epoxysteroids were described with combinations of oxidant/catalysts including 2,6-dichloropyridine N-oxide (DCPNO)/Ru-based catalysts and iodosylbenzene (PhIO)/Mn-porphyrins [34, 35]. In this context, among other interesting and advantageous heterogeneous catalytic procedures, the use of a polymer-supported manganese(III) porphyrin as heterogeneous catalyst and PhIO as oxidant has been reported for the β-selective epoxidation of several Δ4- and Δ5-steroids (Scheme 2) [63] Similar results were observed using DCPNO as oxidant combined with a ruthenium(II) tetrafluorophenylporphyrin (TFPP) carbonyl complex [Ru(TFPP)CO] covalently attached to functionalized silica [64] or with [RuII(F20-TPP)CO] (TPP = tetraphenylporphyrin) covalently attached to poly(ethylene glycol) [65]. Other green approach for the effective preparation of 5β,6β-epoxides from Δ5-steroids (Scheme 2) involves the use of O2 combined with a sacrificial aldehyde (Mukaiyama reaction conditions) and heterogeneous catalysts mainly bearing cobalt as the metal centre [66, 67]. Later, a SiO2-supported Ru-monomer complex was described as catalyst for the epoxidation of cholesteryl benzoate under similar oxidative conditions [68].

Scheme 2.

Epoxidation of Δ5-steroids affording 5β,6β- and 5α,6α-epoxides.

An alternative strategy to allow the recovery and efficient reuse of the catalysts is their use in perfluorinated compounds to mediate the oxidative reactions, being the fluorinated solvents also recoverable and reusable. Accordingly, it was reported that both 2,4-bisperfluorooctylphenyl butylselenide combined with H2O2 [69] and a ruthenium-pyridine-benzimidazole complex bearing perfluorinated ‘ponytails’ under Mukaiyama reaction conditions [70] catalyzed the epoxidation of various olefins, including 3β-chlorocholest-5-ene in a fluorous biphasic system.

The epoxidation of Δ5-steroids (Scheme 2) mediated by organocatalysts has been reported as an interesting approach to obtain these biological and pharmaceutical interesting steroids avoiding the contamination with metal compounds. A representative example is the regio- and stereoselective epoxidation of cholesteryl benzoate performed with O2 in the presence of benzhydrol catalyzed by N-hydroxyphthalimide (NHPI) and hexafluoroacetone. Among other epoxides, this metal-free aerobic procedure allowed the selective preparation of 5α,6α-epoxycholesteryl benzoate in moderate yield [71]. Additionally, other 5β,6β-epoxysteroids (Scheme 2) were efficiently prepared using chiral ketones [e.g. 1,1,3(S),5(R)-tetramethyl-4-oxo-2(R),6(S)-diphenylpiperidinium triflate] as organocatalysts and OxoneTM as oxidant [72]. More recently, Dansey et al. [73] reported the application of a chiral and bulky fructose-derived ketone as catalyst also combined with OxoneTM for the regio- and stereoselective epoxidation of a diene A-homosteroid that occurred in the steroidal A-ring and afforded the corresponding β-epoxide as the only product in 35% yield [73].

The previously referred hexahaloacetones, including hexafluoroacetone, can be used as catalysts in combination with H2O2 for the epoxidation of several estra-5(10),9(11)-dienes to obtain the corresponding 5α,10α-epoxy derivatives (Scheme 3) as the major reaction products. An improvement of the α:β ratio of isomers to 7:1 was observed in the epoxidation of the substrate 3,3-ethylenedioxo-17α-(1-propynyl)estra-5(10),9(11)-dien-17β-ol using chiral ammonium salts derived from cinchona alkaloids as phase-transfer enantioselective catalysts under similar oxidation conditions [74]. Other oxidative conditions to perform this transformation (Scheme 3) used stoichiometric MCPBA or metal catalysts under homogeneous conditions. These included methylrhenium trioxide combined with H2O2 or urea-hydrogen peroxide or FeII-phthalocyanine and PhIO. However, the results were poorer than those observed with the combination of hexahaloacetones and H2O2 [75].

Scheme 3.

Regioselective epoxidation of 3,3-ethylenedioxo-Δ5(10),9(11)-steroidal dienes.

Guggulsterones are natural steroids with high potential therapeutic interest namely as hypocholesterolemic agents, and therefore it is important to study their chemical reactivity including under oxidative conditions. For this purpose, the use of H2O2 combined with different 5,10,15,20-tetraarylporphyrinatoiron(III)chlorides (e.g., iron(III) 5,10,15,20-tetrakis(2′,6′-dichloro-3′-sulfonatophenyl)porphyrin, [Cl8TPPS4Fe(III)]) in dichloromethane as well as in the ionic liquid [bmim]BF4 was evaluated by Singhal and Chauhan. Interestingly, in both solvents the 17,20-epoxide was formed in moderate yields along with minor hydroxylated products and it was observed that the reaction was more effective with Z-guggulsterone than its geometric isomer E-guggulsterone. In addition, the use of ionic liquid allowed the easy isolation of the products from the reaction mixture, leaving behind the water-soluble iron(III)porphyrin catalyst immobilized in it [76].

A recent and interesting example involving nanotechnologies was reported by Banerjee et al., who developed a heterogeneous CoxOy–N/C (x=1,3; y=1,4) catalyst composed by cobalt oxide nanoparticles with varying size along with very few large particles with a metallic Co core and an oxidic shell. This catalyst was applied to efficient epoxidation reactions of aromatic and aliphatic olefins using TBHP as the terminal oxidant. Interestingly, among the substrates included in the study, only the linear double bond of 20-oxopregn-5-en-3β-yl trans-styrylates was epoxidized. This cobalt oxide catalyst can be recycled up to five times without significant loss of activity or change in structure [77].

Advertisement

4. Allylic oxidation

The allylic oxidation allows the synthesis of allylic alcohols, esters, ethers and α,β-unsaturated carbonyl compounds and has attracted interest over the years [78]. In the steroids field, the oxidation of alkenes to the corresponding enones, such as Δ5-7-ketones (Scheme 4), is an important reaction, not only because this functionality can be found in biologically active compounds, namely in the nutraceutical 7-oxodehydroepiandrosterone, but also because of its synthetic interest, associated with the further functionalization of the intact double bond or of the carbonyl group [7880].

Typically, the oxidation of Δ5-steroids to Δ5-7-ketones (Scheme 4) has been performed using either chromium(VI) reagents in stoichiometric conditions or with TBHP combined with metal catalysts under homogeneous conditions [34, 35]. Very recently vanadyl acetylacetonate [81] or activated manganese dioxide [82] was explored as interesting catalysts for this reaction, using a 70% aqueous solution of TBHP. In addition, this oxidant was combined with the catalysts NHPI and Co(OAc)2 in another optimized protocol described by Zhao et al. [83] for the regio- and chemoselective allylic oxidation of several functionalized Δ5-steroids.

Scheme 4.

Allylic oxidation of Δ5-steroids to Δ5-7-ketones.

Greener approaches to prepare Δ5-7-oxosteroids from Δ5-steroids (Scheme 4) involved the use of catalysts immobilized on heterogeneous supports, which may allow their recovery and reuse. In fact, several heterogeneous catalysts including KMnO4/SiO2 in benzene or chromium(VI) adsorbed on SiO2/ZrO2, cobalt(II), copper(II), manganese(II) and vanadium(II) immobilized on silica and BiCl3/montmorillonile K-10 were described for the allylic oxidation of Δ5-steroids in combination with TBHP as oxidant [34, 84].

The use of recyclable/reusable acetylacetone-metal catalysts modified by a pyridinium salt as co-catalysts in a NHPI-catalyzed oxidation of cholesteryl acetate by molecular oxygen under mild conditions was described. The pyridinium salt interacting with the acetylacetone ligand behaved as an electron-withdrawing group and as a co-catalyst for the decomposition of the alkyl hydroperoxides formed, allowing the relevant isolated yields. Interestingly, the catalyst [Co(acac-py)2][Cl2] could be easily recovered by a water wash method and reused at least four times with only a slight loss of catalytic activity [85].

Recently, the preparation of multifunctional core-shell nanospheres consisting of a core of metal clusters and an outer microporous silica shell was described. Interestingly, the Pd clusters encapsulated in hybrid core-shell structures exhibit exceptional size-selective catalysis in aerobic allylic oxidations of substrates. In fact, after 60 minutes, conversions of 23.1% and 9.8% were observed for cyclohexene and cholesteryl acetate, respectively, affording mainly allylic oxidation products. These reactivities can be explained by the different sizes of these substrates (cyclohexene ~0.5 nm, cholesteryl acetate ~1.91 nm), which can determine their diffusion to inside the pores of the catalyst [86].

As previously referred, synthetic transformations avoiding the use of toxic and expensive metals are especially attractive for the preparation of compounds that do not tolerate metal contamination such as APIs [87]. A relevant application of this concept was the use of household laundry bleach and aqueous TBHP at sub-ambient temperature for the oxidation of steroidal olefins (Scheme 4) and benzylic compounds to α,β-enones. This procedure is not only simple and economical but also has the advantage of using water as solvent [88]. Later, our group described that various Δ5-steroids could be selectively oxidized to Δ5-7-ketones (Scheme 4) by sodium chlorite associated with NHPI as catalyst in aqueous solvents, achieving good yields [35, 89].

The use of water as solvent was also described in the preparation of several steroidal Δ4-3,6-diketones from Δ4-3-ketones (Scheme 5) catalyzed by dirhodium caprolactamate [Rh2(cap)4] and 70% TBHP in water [90]. This allylic oxidation was also carried out with 5 mol% of CrO3 as catalyst combined with the same oxidant but using benzotrifluoride as a recoverable fluorous solvent [91].

Scheme 5.

Allylic oxidation of Δ4-3-ketone steroids to Δ4-3,6-diketones.

The oxidation of 3β-cholesteryl benzoate to the corresponding Δ5-4-ketone derivative was also described involving the same fluorous solvent and perfluorooctylseleninic acid as catalyst along with PhIO2 as oxidant. Interestingly, this catalyst could be recovered by fluorous extraction as bis(perfluorooctyl)diselenide, which served as a catalyst precursor [92].

Alternative energy sources such as light can also be useful in allylic (Scheme 4) and benzylic oxidation reactions. In this context, the irradiation of olefins such as cholesteryl acetate with UV light in open flasks in the presence of HgBr or N-bromosuccinimide originated the corresponding allylic oxidation products in high yields [93]. More recently, the same transformation was performed by means of a photocatalytic system consisting on the combination of a recoverable graphitic carbon nitride (g-C3N4) and N-hydroxy compounds (e.g., NHPI) to activate O2. Despite the low to moderate conversions, this mild photocatalytic strategy also has the advantages of avoiding the employment of metal derivatives or organic oxidizing agents [94].

Several electrochemical methods were applied in the oxidation of cholesterol and derivatives affording, namely, allylic acetoxylation or hydroxylation products [95, 96]. In effect, an electrochemical system for the aerobic oxidation of cholesteryl acetate induced by iron picolinate complexes was reported by Okamoto et al. Interestingly, this procedure mainly afforded 7-hydroxylated products with high stereoselectivity (α:β ratio > 100:9), despite relatively low yields [97]. Later, it was described that cholesterol can undergo direct electrochemical oxidation on platinum electrode in glacial acetic acid containing sodium perchlorate and sodium acetate as supporting electrolytes. This preparative electrolysis mainly led to 7α- and 7β-acetoxycholesterol in a 10:3 ratio. These products were also found when sodium acetate was replaced by sodium trifluoroacetate, but the stereoselectivity of the reaction was lost and the yields of the oxidized products were low to moderate [95].

Advertisement

5. Other oxidation reactions

Electrochemical methods were also developed and applied in the halogenation of steroids [96, 98100], including Δ5-steroids, to afford 5α,6β-halogenated derivatives that have high biological interest and can be useful in the protection of the double bond in synthetic chemistry. In addition, these procedures can be valuable alternatives to the use of less green reagents namely chlorine gas.

Another important oxidation reaction to which new sustainable procedures have been developed is the Baeyer-Villiger rearrangement [101]. However, within the steroidal field, this reaction is classically performed by means of peroxyacids, such as MCPBA. In this context, the use of MW irradiation to accelerate the oxidation of several steroidal ketones was described. In fact, after few minutes of reaction, the corresponding esters/lactones were successfully obtained (Scheme 6) [102]. A more sustainable oxidant used to perform this reaction is H2O2 which, in combination with the lipophilic catalyst Ca[B(C6F5)4]2 allowed, for example, the preparation of estrolactone from estrone in 88% yield after 4 hours of reaction [103].

Scheme 6.

Baeyer-Villiger oxidation of 17-oxo-5α-androstan-3β-yl acetate by MCPBA under MW.

The dihydroxylation of olefins is an important reaction because the 1,2-diol functionality is present in many synthetic and natural relevant molecules and is a very useful synthetic building block. The most efficient approach for the preparation of steroidal syn-diols is the direct dihydroxylation of olefins, [35, 75], whereas the trans-dihydroxylation of olefins occurs mainly by epoxidation and hydrolysis [104]. Recently, the Brønsted acid p-toluenesulfonic acid (PTSA) was described as a catalyst for the direct trans-dihydroxylation of olefins including cholesterol affording the 5α,6β-diol derivative in 56% yield, in aqueous media. This procedure has the advantages of being mild and metal-free and compatible with a considerable range of organic functional groups, and the catalyst could be recycled and reused [105].

Water was also used as solvent in combination with Aliquat 336 and sand for several reactions of very sparingly soluble high melting-point organic substrates, such as steroids. In this system, Aliquat 336 works as both catalyst and solvent, and its efficiency is enhanced by the moving sand under mechanical stirring. This mixture was successfully applied in the good-yield oxidation of pseudosapogenins into 16-dehydropregnenolone acetate and its analogues using H2O2 and catalyzed by V2O5 [106]. This transformation is of high impact because 16-dehydropregnenolone acetate and similar compounds are important starting materials for the preparation of several semisynthetic steroid drugs [2].

The metal-free oxidation of spironolactone-related sulfides to corresponding sulfoxides and sulfones was performed by the green oxidant H2O2 in the presence of the organocatalyst N-hydroxysuccinimide (NHS). In this high-yielding process, a full oxidation to sulfones occurred in methanol at room temperature, whereas sulfoxides could be selectively obtained using acetone as solvent under reflux temperature (example in Scheme 7). Both processes were compatible with the presence of sensitive groups including ketones, alkenes, hydroxyl groups and benzylic carbons under the described reaction conditions [107].

Scheme 7.

Organocatalytic oxidation of 7α-(phenylmethylthio)-17-hydroxy-3-oxo-17α-pregn-4-ene-21-carboxylic acid γ-lactone by H2O2.

Advertisement

6. Conclusions and future perspectives

Currently, pharmaceutical chemistry is moving towards the incorporation of the sustainable chemistry principles into the development of new reactions and processes. In the oxidation of steroids, however, green approaches are still relatively limited and mostly involving catalytic methods. In addition, the application of nanocatalysts to steroid chemistry has started to emerge.

Considering the importance of sustainability in oxidative process research and development and the biological and synthetic relevance of oxygenated steroid compounds in medicinal chemistry, it is mandatory to increase the efforts to enlarge the scope of the new green chemistry tools, such as novel catalysts, solvents and technologies. Therefore, in the near future, it can be expected an increase in the use of greener solvents, such as water and fluorous solvents. The application of alternative energy sources, including microwaves, sonochemistry and photo irradiation, will contribute to reduce reaction times and overall energy consumption. Furthermore, the continuous replacement of stoichiometric methods by catalytic reactions, preferably avoiding metal catalysts and involving heterogeneous catalysts is also expected.

In spite of some limitations, such as the shape and complexity of steroid compounds, which are responsible for their singular chemo-, regio- and stereoselectivities, their solubility problems and their rigid molecular framework, nanocatalysts, will certainly be increasingly applied in catalytic oxidative processes namely in steroid chemistry.

Advertisement

Acknowledgments

JAR Salvador and MMC Silva thank University of Coimbra and SM Silvestre thanks University of Beira Interior for their financial support.

References

  1. 1. Brueggemeier RW, Li P-K. Fundamentals of steroid chemistry and biochemistry. In: Abraham DJ, editor. Burger's Medicinal Chemistry and Drug Discovery, Vol. 3. Cardiovascular Agents and Endocrines. 6th ed. New York: John Wiley & Sons; 2003. pp. 594-627. DOI: 10.1002/0471266949
  2. 2. Lednicer D. Steroid Chemistry at a Glance. Chichester: John Wiley & Sons; 2011. 144 p. DOI: 10.1002/9780470973639
  3. 3. Nicolaou KC, Montagnon T. Steroids & the Pill. In: Nicolaou KC, Montagnon T, editors. Molecules that changed the world. Weinheim: Wiley-VCH; 2008. pp. 79-90. ISBN: 978-3-527-30983-2
  4. 4. Salvador JAR, Carvalho JFS, Neves MAC, Silvestre SM, Leitão AJ, Silva MMC, Sá e Melo, ML. Anticancer steroids: Linking natural and semi-synthetic compounds. Natural Product Reports. 2013; 30(2):324-374.
  5. 5. Hill RA, Kirk DN, Makin HLJ, Murphy GM. Dictionary of Steroids. London: Chapman & Hill; 1991. ISBN-13: 978-0412270604
  6. 6. Moss GP. Nomenclature of steroids (recommendations 1989). Pure & Applied Chemistry. 1989; 61(10):1783-1822.
  7. 7. www.epa.gov/greenchemistry (accessed 29 January 2016).
  8. 8. Dunn PJ. The importance of green chemistry in process research and development. Chemical Society Reviews. 2012; 41:1452-1461.
  9. 9. Tucker JL. Green chemistry: A pharmaceutical perspective. Organic Process Research & Development. 2006; 10:315-319.
  10. 10. Sheldon RA. Fundamentals of green chemistry: Efficiency in reaction design. Chemical Society Reviews. 2012; 41:1437-1451.
  11. 11. Clark JH. Green chemistry: Today (and tomorrow). Green Chemistry. 2006; 8:17-21.
  12. 12. Anastas P, Eghbali N. Green chemistry: Principles and practice. Chemical Society Reviews. 2010; 39:301-312.
  13. 13. Busacca CA, Fandrick DR, Song JJ, Senanayake CH. The growing impact of catalysis in the pharmaceutical industry. Advanced Synthesis & Catalysis. 2011; 353:1825-1864.
  14. 14. Ranu BC, Bhadra S, Saha D. Green recyclable supported-metal catalyst for useful organic transformations. Current Organic Synthesis. 2011; 8:146-171.
  15. 15. Cozzi F. Immobilization of organic catalysts: When, why, and how. Advanced Synthesis & Catalysis. 2006; 348:1367-1390.
  16. 16. Dalko PI, Moisan L. In the golden age of organocatalysis. Angewandte Chemie International Edition. 2004; 43:5138-5175.
  17. 17. Alemán J, Cabrera S. Applications of asymmetric organocatalysis in medicinal chemistry. Chemical Society Reviews. 2013; 42:774-793.
  18. 18. Clouthier CM, Pelletier JN. Expanding the organic toolbox: A guide to integrating biocatalysis in synthesis. Chemical Society Reviews. 2012; 41:1585-1605.
  19. 19. Dahl JA, Maddux BLS, Hutchison JE. Toward greener nanosynthesis. Chemical Reviews. 2007; 107:2228-2269, and references cited therein.
  20. 20. Polshettiwar V, Varma RS. Green chemistry by nano-catalysis. Green Chemistry. 2010; 12:743-754.
  21. 21. Kalidindi SB, Jagirdar BR. Nanocatalysis and prospects of green chemistry. ChemSusChem. 2012; 5:65-75.
  22. 22. Clark JH, Tavener SJ. Alternative solvents: Shades of green. Organic Process Research & Development. 2007; 11:149-155.
  23. 23. Simon M-O, Li C-J. Green chemistry oriented organic synthesis in water. Chemical Society Reviews. 2012; 41:1415-1427.
  24. 24. Hailes HC. Reaction solvent selection: The potential of water as a solvent for organic transformations. Organic Process Research & Development. 2007; 11:114-120.
  25. 25. Siódmiak T, Marszall MP, Proszowska A. Ionic liquids: A new strategy in pharmaceutical synthesis. Mini-Reviews in Organic Chemistry. 2012; 9:203-208.
  26. 26. Chowdhury S, Mohan RS, Scott JL. Reactivity of ionic liquids. Tetrahedron. 2007; 63:2363-2389.
  27. 27. Fish RH. Fluorous biphasic catalysis: A new paradigm for the separation of homogeneous catalysts from their reaction substrates and products. Chemistry: A European Journal. 1999; 5:1677-1680.
  28. 28. Cole-Hamilton DJ. Asymmetric catalytic synthesis of organic compounds using metal complexes in supercritical fluids. Advanced Synthesis & Catalysis. 2006; 348:1341-1351.
  29. 29. Leitner W. Supercritical carbon dioxide as a green reaction medium for catalysis. Accounts of Chemical Research. 2002; 35:746-756.
  30. 30. Baig RBN, Varma RS. Alternative energy input: Mechanochemical, microwave and ultrasound-assisted organic synthesis. Chemical Society Reviews. 2012; 41:1559-1584.
  31. 31. Kappe CO, Pieber B, Dallinger D. Microwave effects in organic synthesis: Myth or reality?. Angewandte Chemie International Edition. 2013; 52:1088-1094.
  32. 32. Mason TJ. Ultrasound in synthetic organic chemistry. Chemical Society Reviews. 1997; 26:443-451.
  33. 33. Hoffmann N. Photochemical reactions as key steps in organic synthesis. Chemical Reviews. 2008; 108:1052-1103.
  34. 34. Salvador JAR, Silvestre SM, Moreira VM. Catalytic oxidative processes in steroid chemistry: Allylic oxidation, beta-selective epoxidation, alcohol oxidation and remote functionalization reactions. Current Organic Chemistry. 2006; 10(17):2227-2257.
  35. 35. Salvador JAR, Silvestre SM, Moreira VM. Recent developments in oxidative processes in steroid chemistry. Current Organic Chemistry. 2012; 16(10):1243-1276.
  36. 36. Lounis Z, Riahi A, Djafri F, Muzart J. Chromium-exchanged zeolite (Cr-E-ZSM-5) as catalyst for alcohol oxidation and benzylic oxidation with t-BuOOH. Applied Catalysis A-General. 2006; 309(2):270-272.
  37. 37. Fei H, Shin J, Meng YS, Adelhardt M, Sutter J, Meyer K, Cohen SM. Reusable oxidation catalysis using metal-monocatecholato species in a robust metal−organic framework. Journal of the American Chemical Society. 2014; 136:4965-4973.
  38. 38. Sarmah G, Bharadwaj SK, Dewan A, Gogoi A, Bora U. An efficient and reusable vanadium based catalytic system for room temperature oxidation of alcohols to aldehydes and ketones. Tetrahedron Letters. 2014; 55:5029-5032.
  39. 39. Carson F, Agrawal S, Gustafsson M, Bartoszewicz A, Moraga F, Zou X, Martín-Matute B. Ruthenium complexation in an aluminium metal-organic framework and its application in alcohol oxidation catalysis. Chemistry-A European Journal. 2012; 18:15337-15344.
  40. 40. Kakiuchi N, Maeda Y, Nishimura T, Uemura S. Pd(II)-hydrotalcite-catalyzed oxidation of alcohols to aldehydes and ketones using atmospheric pressure of air. Journal of Organic Chemistry. 2001; 66:6620-6625.
  41. 41. Kim S, Bae SW, Lee JS, Park J. Recyclable gold nanoparticle catalyst for the aerobic alcohol oxidation and C-C bond forming reaction between primary alcohols and ketones under ambient conditions. Tetrahedron. 2009; 65(7):1461-1466.
  42. 42. Mitsudome T, Noujima A, Mizugaki T, Jitsukawa K, Kaneda K. Efficient aerobic oxidation of alcohols using a hydrotalcite-supported gold nanoparticle catalyst. Advanced Synthesis & Catalysis. 2009; 351(11-12):1890-1896.
  43. 43. Kwon MS, Kim N, Park CM, Lee JS, Kang KY, Park J. Palladium nanoparticles entrapped in aluminum hydroxide: Dual catalyst for alkene hydrogenation and aerobic alcohol oxidation. Organic Letters. 2005; 7(6):1077-1079.
  44. 44. Mifsud M, Parkhomenko KV, Arends IWCE, Sheldon RA. Pd nanoparticles as catalysts for green and sustainable oxidation of functionalized alcohols in aqueous media. Tetrahedron. 2010; 66(5):1040-1044.
  45. 45. Nishimura T, Maeda Y, Kakiuchi N, Uemura S. Palladium(II)-catalysed oxidation of alcohols under an oxygen atmosphere in a fluorous biphase system (FBS). Journal of the Chemical Society-Perkin Transactions 1. 2000; (24):4301-4305.
  46. 46. Zaccheria F, Ravasio N, Psaro R, Fusi A. Synthetic scope of alcohol transfer dehydrogenation catalyzed by Cu/Al2O3: A new metallic catalyst with unusual selectivity. Chemistry-A European Journal. 2006; 12(24):6426-6431.
  47. 47. Mitsudome T, Mikami Y, Ebata K, Mizugaki T, Jitsukawa K, Kaneda K. Copper nanoparticles on hydrotalcite as a heterogeneous catalyst for oxidant-free dehydrogenation of alcohols. Chemical Communications. 2008; (39):4804-4806.
  48. 48. Mitsudome T, Mikami Y, Funai H, Mizugaki T, Jitsukawa K, Kaneda K. Heterogeneous catalysis – Oxidant-free alcohol dehydrogenation using a reusable hydrotalcite-supported silver nanoparticle catalyst. Angewandte Chemie-International Edition. 2008; 47(1):138-141.
  49. 49. He X, Chan TH. New non-volatile and odorless organosulfur compounds anchored on ionic liquids. Recyclable reagents for Swern oxidation. Tetrahedron. 2006; 62(14):3389-3394.
  50. 50. Tsuchiya D, Tabata M, Moriyama K, Togo H. Efficient Swern oxidation and Corey-Kim oxidation with ion-supported methyl sulfoxides and methyl sulfides. Tetrahedron. 2012; 68(34):6849-6855.
  51. 51. Suzuki Y, Iinuma M, Moriyama K, Togo H. TEMPO-mediated oxidation of alcohols with ion-supported (Diacetoxyiodo)benzenes. Synlett. 2012; 23:1250-1256.
  52. 52. Ginotra SK, Chhikara BS, Singh M, Chandra R, Tandon V. Efficient oxidizing methods for the synthesis of oxandrolone intermediates. Chemical & Pharmaceutical Bulletin. 2004; 52(8):989-991.
  53. 53. Chhikara BS, Chandra R, Tandon V. IBX in an ionic liquid: Eco-friendly oxidation of 17α-methylandrostan-3β,17β-diol, an intermediate in the synthesis of anabolic oxandrolone. Tetrahedron Letters. 2004; 45(41):7585-7588.
  54. 54. Ozen R, Kus NS. Oxidation of alcohols to carbonyl compounds, benzylic carbons to their ketones, and arenes to their quinones with molecular oxygen in subcritical water. Monatshefte Fur Chemie. 2006; 137(12):1597-1600.
  55. 55. Chakraborty V, Bordoloi M. Microwave-assisted oxidation of alcohols by pyridinium chlorochromate. Journal of Chemical Research. 1999; (2):118-119.
  56. 56. Guardiola F, Dutta PC, Codony R, Savage GP, editors. Cholesterol and Phytosterol Oxidation Products: Analysis, Occurrence, and Biological Effects. Champaign: AOCS Press; 2002. 394 p. ISBN: 9781439822210
  57. 57. Kadis B. Steroid epoxides in biologic systems – Review. Journal of Steroid Biochemistry. 1978; 9(1):75-81.
  58. 58. Matthews GJ, Hassner A. Synthesis of oxiranes, aziridines and episulfides. In: Fried J, Edwards JA, editors. Organic Reactions in Steroid Chemistry. New York: Van Nostrand Reinold Company; 1972. Vol. 2, pp. 1-21. ISBN: 13: 978-0442783396.
  59. 59. Clemente-Tejeda D, Lopez-Moreno A, Bermejo FA. Oxidation of unsaturated steroid ketones with hydrogen peroxide catalyzed by Fe(bpmen)(OTf)2. New methodology to access biologically active steroids by chemo-, and stereoselective processes. Tetrahedron. 2012; 68:9249-9255.
  60. 60. Clemente-Tejeda D, Bermejo FA. Oxidation of alkenes with non-heme iron complexes: Suitability as an organic synthetic method. Tetrahedron. 2014; 70:9381-9386.
  61. 61. Bruyneel F, Letondor C, Basturk B, Gualandi A, Pordea A, Stoeckli-Evans H, Neier R. Catalytic epoxidation of alkenes by the manganese complex of a reduced porphyrinogen macrocycle. Advanced Synthesis & Catalysis. 2012; 354:428-440.
  62. 62. Cussó O, Garcia-Bosch I, Font D, Ribas X, Lloret-Fillol J, Costas M. Highly stereoselective epoxidation with H2O2 catalyzed by electron-rich aminopyridine manganese catalysts. Organic Letters. 2013; 15(24):6158-6161.
  63. 63. Du CP, Li ZK, Wen XM, Wu J, Yu XQ, Yang M, Xie RG. Highly diastereoselective epoxidation of cholest-5-ene derivatives catalyzed by polymer-supported manganese(III) porphyrins. Journal of Molecular Catalysis A-Chemical. 2004; 216(1):7-12.
  64. 64. Zhao YC, Xiang YZ, Pu L, Yang M, Yu XQ. Highly β-selective epoxidation of the Δ5- and Δ4-unsaturated steroids catalyzed by the silica-supported polyhalogenated ruthenium porphyrin. Applied Catalysis A-General. 2006; 301(2):176-181.
  65. 65. Zhang JL, Huang JS, Che CM. Oxidation chemistry of poly(ethylene glycol)-supported carbonylruthenium(II) and dioxoruthenium(VI) meso-tetrakis(pentafluorophenyl)porphyrin. Chemistry-A European Journal. 2006; 12(11):3020-3031.
  66. 66. Dhar D, Koltypin Y, Gedanken A, Chandrasekaran S. Catalytic aerobic epoxidation of olefins by nanostructured amorphous CoO-MCM-41. Catalysis Letters. 2003; 86(4):197-200.
  67. 67. Silvestre SM, Salvador JAR, Clark JH. β-Selective epoxidation of Δ5-steroids by O2 using surface functionalised silica supported cobalt catalysts. Journal of Molecular Catalysis A-Chemical. 2004; 219(1):143-147.
  68. 68. Tada M, Muratsugu S, Kinoshita M, Sasaki T, Iwasawa Y. Alternative selective oxidation pathways for aldehyde oxidation and alkene epoxidation on a SiO2-supported Ru-monomer complex catalyst. Journal of the American Chemical Society. 2010; 132(2):713-724.
  69. 69. Betzemeier B, Lhermitte F, Knochel P. A selenium catalyzed epoxidation in perfluorinated solvents with hydrogen peroxide. Synlett. 1999; (4):489-491.
  70. 70. Ragagnin G, Knochel P. Aerobic Ru-catalyzed epoxidations in fluorous biphasic system using new fluorous benzimidazolic ligands. Synlett. 2004; (6):951-954.
  71. 71. Iwahama T, Sakaguchi S, Ishii Y. Epoxidation of alkenes using dioxygen in the presence of an alcohol catalyzed by N-hydroxyphthalimide and hexafluoroacetone without any metal catalyst. Chemical Communications. 1999; (8):727-728.
  72. 72. Yang D, Jiao GS. Highly β-selective epoxidation of Δ5-unsaturated steroids catalyzed by ketones. Chemistry-a European Journal. 2000; 6(19):3517-3521.
  73. 73. Dansey MV, Di Chenna PH, Veleiro AS, Kristofikova Z, Chodounska H, Kasal A, Burton G. Synthesis and GABAA receptor activity of A-homo analogues of neuroactive steroids. European Journal of Medicinal Chemistry. 2010; 45(7):3063-3069.
  74. 74. Yang Y-X, Li Z, Chen G-R, Li Y-C. Phase-transfer catalysed enantioselective epoxidation of estra-Δ5(10),9(11)-diene using chiral ammonium salts derived from cinchona alkaloids. Letters in Organic Chemistry. 2010; 7:163-167.
  75. 75. Salvador JAR, Silvestre SM, Moreira VM. Catalytic epoxidation and syn-dihydroxylation reactions in steroid chemistry. Current Organic Chemistry. 2008; 12(6):492-522.
  76. 76. Singhal A, Chauhan SMS. Biomimetic oxidation of guggulsterone with hydrogen peroxide catalyzed by iron(III) porphyrins in ionic liquid. Catalysis Communications. 2012; 25:28-31.
  77. 77. Banerjee D, Jagadeesh RV, Junge K, Pohl M-M, Radnik J, Bruckner A, Beller M. Convenient and mild epoxidation of alkenes using heterogeneous cobalt oxide catalysts. Angewandte Chemie-International Edition. 2014; 53:4359-4363.
  78. 78. Bulman Page PC, McCarthy TJ. Oxidation adjacent to C=C Bonds. In: Trost BM, Flemming I, chief editors; Ley SV, volume editor. Comprehensive Organic Synthesis. Oxford-New York-Seoul-Tokyo: Pergamon Press; 1991. Vol. 7, pp. 83-117. ISBN: 0-08-040598-3.
  79. 79. Arsenou ES, Fousteris MA, Koutsourea AI, Nikolaropoulos SS. 7-keto-Δ5-steroids: Key-molecules owning particular biological and chemical interest. Mini Reviews in Medicinal Chemistry. 2003; 3(6):557-567.
  80. 80. Parish EJ, Kizito SA, Qiu ZH. Review of chemical syntheses of 7-keto-Δ5-sterols. Lipids. 2004; 39(8):801-804.
  81. 81. Grainger WS, Parish EJ. Allylic oxidation of steroidal olefins by vanadyl acetylacetonate and tert-butyl hydroperoxide. Steroids. 2015; 101:103-109.
  82. 82. Serra S. MnO2/TBHP: A versatile and user-friendly combination of reagents for the oxidation of allylic and benzylic methylene functional groups. European Journal of Organic Chemistry. 2015; (29): 6472-6478.
  83. 83. Zhao Q, Qian C, Chen X-Z. N-Hydroxyphthalimide catalyzed allylic oxidation of steroids with t-butyl hydroperoxide. Steroids. 2015; 94:1-6.
  84. 84. Salvador JAR, Silvestre SM. Bismuth-catalyzed allylic oxidation using t-butyl hydroperoxide. Tetrahedron Letters. 2005; 46(15):2581-2584.
  85. 85. Zhang P, Wang C, Chen Z, Li H. Acetylacetone-metal catalyst modified by pyridinium salt group applied to the NHPI-catalyzed oxidation of cholesteryl acetate. Catalysis Science & Technology. 2011; 1(7):1133-1137.
  86. 86. Qiao Z-A, Zhang P, Chai S-H, Chi M, Veith GM, Gallego NC, Kidder M, Dai S. Lab-in-a-shell: Encapsulating metal clusters for size sieving catalysis. Journal of the American Chemical Society. 2014; 136:11260-11263.
  87. 87. Adam W, Saha-Moller CR, Ganeshpure PA. Synthetic applications of nonmetal catalysts for homogeneous oxidations. Chemical Reviews. 2001; 101(11):3499-3548.
  88. 88. Marwah P, Marwah A, Lardy HA. An economical and green approach for the oxidation of olefins to enones. Green Chemistry. 2004; 6(11):570-577.
  89. 89. Silvestre SM, Salvador JAR. Allylic and benzylic oxidation reactions with sodium chlorite. Tetrahedron. 2007; 63(11):2439-2445.
  90. 90. McLaughlin EC, Choi H, Wang K, Chiou G, Doyle MP. Allylic oxidations catalyzed by dirhodium caprolactamate via aqueous tert-butyl hydroperoxide: The role of the tert-butylperoxy radical. Journal of Organic Chemistry. 2009; 74(2):730-738.
  91. 91. Boitsov S, Riahi A, Muzart J. Chromium(VI) oxide-catalysed oxidations by tert-butyl hydroperoxide using benzotrifluoride as solvent. Comptes Rendus de l'Académie des Sciences - Series IIC – Chemistry. 2000; 3(9):747-750.
  92. 92. Crich D, Zou YK. Catalytic allylic oxidation with a recyclable, fluorous seleninic acid. Organic Letters. 2004; 6(5):775-777.
  93. 93. Friedman N, Gorodets M, Mazur Y. Photo-oxidations of olefins and benzene derivatives. Journal of the Chemical Society D-Chemical Communications. 1971; (15):874.
  94. 94. Zhang P, Wang Y, Yao J, Wang C, Yan C, Antonietti M, Li H. Visible-light-induced metal-free allylic oxidation utilizing a coupled photocatalytic system of g-C3N4 and N-Hydroxy compounds. Advanced Synthesis & Catalysis. 2011; 353(9):1447-1451.
  95. 95. Kowalski J, Ploszynska J, Sobkowiak A, Morzycki JW, Wilczewska AZ. Direct electrochemical acetoxylation of cholesterol at the allylic position. Journal of Electroanalytical Chemistry. 2005; 585(2):275-280.
  96. 96. Morzycki JW, Sobkowiak A. Electrochemical oxidation of cholesterol. Beilstein Journal of Organic Chemistry. 2015; 11:392-402.
  97. 97. Okamoto I, Funaki W, Nakaya K, Kotani E, Takeya T. A new electrochemical system for stereoselective allylic hydroxylation of cholesteryl acetate with dioxygen induced by iron picolinate complexes. Chemical & Pharmaceutical Bulletin. 2004; 52(6):756-759.
  98. 98. Maki S, Konno K, Ohba S, Takayama H. Stereoselective chlorination of steroidal 5,6-olefin by an electrochemical method; A convenient synthesis of blattelastanoside B. Tetrahedron Letters. 1998; 39(21):3541-3542.
  99. 99. Milisavljević S, Vukićević RD. Electrochemical chlorination of some 5-unsaturated steroids. Journal of the Serbian Chemical Society. 2004; 69 (11):941-947.
  100. 100. Milisavljević S, Wurst K, Laus G, Vukićević MD, Vukićević RD. Electrochemical bromination of cholest-5-enes. Steroids. 2005; 70:867-872.
  101. 101. ten Brink GJ, Arends I, Sheldon RA. The Baeyer-Villiger reaction: New developments toward greener procedures. Chemical Reviews. 2004;104,(9):4105-4123.
  102. 102. Borah JM, Chowdhury P. Expedited Baeyer-Villiger oxidation of steroidal ketones by microwave irradiation. Steroids. 2011; 76(12):1341-1345.
  103. 103. Uyanik M, Nakashima D, Ishihara K. Baeyer–Villiger oxidation and oxidative cascade reactions with aqueous hydrogen peroxide catalyzed by lipophilic Li[B(C6F5)4] and Ca[B(C6F5)4]2. Angewandte Chemie - International Edition. 2012; 51:9093-9096.
  104. 104. Yudin AK, editor. Aziridines and epoxides in organic synthesis. Weinheim: Wiley-VCH; 2006. 516 p. ISBN: 978-3-527-31213-9
  105. 105. Rosatella AA, Afonso CAM. Brønsted acid-catalyzed dihydroxylation of olefins in aqueous medium. Advanced Synthesis & Catalysis. 2011; 353(16):2920-2926.
  106. 106. Cui X, Li B, Liu T, Li C. A practical solution for aqueous reactions of water-insoluble high-melting-point organic substrates. Green Chemistry. 2012; 14(3):668-672.
  107. 107. Xiong Z-G, Zhang J, Hu X-M. Selective oxidation of spirolactone-related sulfides to corresponding sulfoxides and sulfones by hydrogen peroxide in the presence of N-hydroxysuccinimide. Applied Catalysis A-General. 2008; 334(1-2):44-50.

Written By

Samuel M. Silvestre, M. Manuel C. Silva and Jorge A. R. Salvador

Submitted: 27 October 2015 Reviewed: 03 February 2016 Published: 01 June 2016