Open access peer-reviewed Edited volume

Aluminium Alloys

Theory and Applications

The present book enhances in detail the scope and objective of various developmental activities of the aluminium alloys. A lot of research on aluminium alloys has been performed. Currently, the research efforts are connected to the relatively new methods and processes. We hope that people new to the aluminium alloys investigation will find this book to be of assistance for the industry and university fields enabling them to keep up-to-date with the latest developments in aluminium alloys research.

Read more >Order hardcopy
IntechOpen
Aluminium AlloysTheory and ApplicationsEdited by Tibor Kvackaj

Published: February 4th 2011

DOI: 10.5772/576

ISBN: 978-953-307-244-9

Copyright year: 2011

Books open for chapter submissions

128477 Total Chapter Downloads

18 Crossref Citations

39 Web of Science Citations

39 Dimensions Citations

chaptersDownloads

Open access peer-reviewed

1. Effect of Severe Plastic Deformation on the Properties and Structural Developments of high purity Al and Al-Cu-Mg-Zr Aluminium Alloy

By Tibor Kvačkaj, Jana Bidulská, Robert Kočiško and Róbert Bidulský

3452

Open access peer-reviewed

2. An Evaluation of Severe Plastic Deformation on the Densification Behaviour of Powder Metallurgy Aluminium Alloy Al-Mg-Si-Cu-Fe and Al-Zn-Mg-Cu

By Róbert Bidulský, Marco Actis Grande, Jana Bidulská, Róbert Kočiško and Tibor Kvačkaj

3198

Open access peer-reviewed

3. An Anisotropic Behaviour Analysis of AA2024 Aluminium Alloy Undergoing Large Plastic Deformations

By Adinel Gavrus and Henri Francillette

4751

Open access peer-reviewed

4. A Simple Approach to the Study of the Ageing Behaviour of Laser Beam and Friction Stir Welds between Similar and Dissimilar Alloys

By Claudio Badini, Claudia Milena Vega Bolivar, Andrea Antonini, Sara Biamino, Paolo Fino, Diego Giovanni Manfredi, Elisa Paola Ambrosio, Francesco Acerra, Giuseppe Campanile and Matteo Pavese

3404

Open access peer-reviewed

5. Non-Destructive Testing Techniques for Detecting Imperfections in Friction Stir Welds of Aluminium Alloys

By Pedro Vilaça and Telmo G. Santos

6663

Open access peer-reviewed

6. Aluminium 7020 Alloy and Its Welding Fatigue Behaviour

By Carlos Bloem, Maria Salvador, Vicente Amigó and Mary Vergara

6815

Open access peer-reviewed

7. Fatigue Behaviour of Welded Joints Made of 6061-T651 Aluminium Alloy

By Alfredo S. Ribeiro and Abílio M.P. de Jesus

7503

Open access peer-reviewed

8. Inhomogeneous Material Modeling and Characterization for Aluminium Alloys and Welded Joints

By Jisen Qiao and Wenyan Wang

3444

Open access peer-reviewed

9. Cyclic Deformation Behavior and Its Optimization at Elevated Temperature

By Patiphan Juijerm and Igor Altenberger

1733

Open access peer-reviewed

10. Summary on Uniaxial Ratchetting of 6061-T6 Aluminium Alloy

By Guozheng Kang, Jun Ding and Yujie Liu

3981

Open access peer-reviewed

11. Crack Growth in AlCu4Mg1 Alloy under Combined Cyclic Bending and Torsion

By Dariusz Rozumek and Ewald Macha

2196

Open access peer-reviewed

12. Fatigue Crack Growth Simulation of Aluminium Alloy under Cyclic Sequence Effects

By S. Abdullah, S. M. Beden and A. K. Ariffin

6049

Open access peer-reviewed

13. Creep and Creep-Fatigue Crack Growth in Aluminium Alloys

By Gilbert Hénaff, Grégory Odemer and Bertrand Journet

5522

Open access peer-reviewed

14. New Approaches to Reaction Kinetics during Molten Aluminum Refining Using Electron Backscatter Diffraction (EBSD)

By Alfredo Flores and Jesús Torres

3817

Open access peer-reviewed

15. Modelling of Precipitation Hardening in Casting Aluminium Alloys

By Linda Wu and W. George Ferguson

6772

Open access peer-reviewed

16. Metallographic Etching of Aluminium and Its Alloys for Restoration of Obliterated Marks in Forensic Science Practice and Investigations

By R. Kuppuswamy

18751

Open access peer-reviewed

17. Performance Optimization in Machining of Aluminium Alloys for Moulds Production: HSM and EDM

By Andrea Gatto, Elena Bassoli and Luca Iuliano

6398

Open access peer-reviewed

18. Machining and Machinability of Aluminum Alloys

By V. Songmene, R. Khettabi, I. Zaghbani, J. Kouam, and A. Djebara

34028

Edited volume and chapters are indexed in

  • Worldcat
  • OpenAIRE
  • Google Scholar
  • AZ ebsco
  • Base
  • CNKI
  • IET Inspec

Order a hardcopy of the Edited volume

Free shipping with DHL Express

Hardcover (ex. VAT)£170

Order now

Residents of European Union countries need to add a Book Value-Added Tax of 5%. Institutions and companies, registered as VAT taxable entities in their own EU member state, will not pay VAT by providing IntechOpen with their VAT registration number. This is made possible by the EU reverse charge method.

Special discount for IntechOpen contributors

All IntechOpen contributors are offered special discounts starting at 40% OFF available through your personal dashboard

Login and purchase