Open access

Optimization of Additive Manufacturing Processes Focused on 3D Printing

Written By

Razvan Udroiu and Anisor Nedelcu

Submitted: 13 November 2010 Published: 26 September 2011

DOI: 10.5772/21433

From the Edited Volume

Rapid Prototyping Technology - Principles and Functional Requirements

Edited by Muhammad Enamul Hoque

Chapter metrics overview

11,006 Chapter Downloads

View Full Metrics

Written By

Razvan Udroiu and Anisor Nedelcu

Submitted: 13 November 2010 Published: 26 September 2011